| Age | Commit message (Collapse) | Author |
|---|
|
Add a ispIndex field to CropParams that is used to track
which ISP output (0/1) will be used for a given stream during
configuration.
Tracking this information is required for an upcoming change where crop
rectangles can be specified for each configured stream. Currently, the
value is fixed to 0.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In preparation for assigning separate crop windows for each stream, add
a new CropParams structure that stores the existing ispCrop_ and
ispMinCropSize_ as fields. Use a new std::map to store a CropParams
structure where the map key is the index of the stream configuration in
the CameraConfiguration vector.
At preset, only a single CropParams structure will be set at key == 0 to
preserve the existing crop handling logic.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This will be required when we program separate crop values to each ISP
output in a future commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Do not cache the scalerCrop_ parameter. The cached value is used to
update the request metadata, but since this is not an expensive
operation (and can only occur once per frame), caching it is of limited
value.
This will simplify logic in a future commit where we can specify a
crop per-output stream.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a vendor control rpi::ScalerCrops that is analogous to the current
core::ScalerCrop, but can apply a different crop to each configured
stream.
This control takes a span of Rectangle structures - the order of
rectangles must match the order of streams configured by the application.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The RGB565 and RGB565_BE formats incorrectly specify a wrong value
of 3 bytes per group of pixels, when they actually use 2. Fix them.
Signed-off-by: Hou Qi <qi.hou@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Previous iterations of the ExposureModeHelper class had a
setShutterGainLimits() function, which got renamed to setLimits(). The
documentation still uses the old name. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
When only a single camera is available, showing the camera selection
dialog is unnecessary. It's better to automatically select the available
camera without prompting the user for input.
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Plumb the dw100 dewarper as a V4L2M2M converter in the rkisp1 pipeline
handler. If the dewarper is found, it is instantiated and buffers are
exported from it, instead of RkISP1Path. Internal buffers are allocated
for the RkISP1Path in case where dewarper is going to be used.
The RKISP1 pipeline handler now supports scaler crop control through
the converter. Register the ScalerCrop control for the cameras created
in the RKISP1 pipeline handler.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Currently the rkisp1 pipeline handler only registers controls that are
related to the IPA. This patch prepares the rkisp1 pipeline-handler to
register camera controls which are not related to the IPA.
Hence, introduce an additional ControlInfoMap for IPA controls. These
controls will be merged together with the controls in the pipeline
handler (introduced subsequently) as part of updateControls() and
together will be registered during the registration of the camera.
This is similar to what IPU3 pipeline handler handles its controls.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If the converter has cropping capability on its input, the interface
should support it by providing appropriate virtual functions. Provide
Feature::InputCrop in Feature enumeration for the same.
Provide virtual setInputCrop() and inputCropBounds() interfaces so that
the converter can implement its own cropping functionality.
The V4L2M2MConverter implements these interfaces of the Converter
interface. Not all V4L2M2M converters will have cropping ability
on its input, hence it needs to be discovered at construction time.
If the capability to crop is identified successfully, the cropping
bounds are determined during configure() time.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
This patch intends to extend the converter interface to have feature
flags, which enables each converter to expose the set of features
it supports.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
OV7251 is a mono VGA global shutter sensor that has a mainline
driver and works with libcamera.
Add the supporting files for it. The tuning is copied from OV9281.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add python bindings for quering vendor information from a ControlId.
While at it, update __repr__ so that it also prints the vendor.
Example usage:
>>> cid
libcamera.ControlId(20, libcamera.Saturation, ControlType.Float)
>>> cid.vendor
'libcamera'
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that the vendor of the control can be queried, print it in
--list-controls.
Example output:
$ cam -c 1 --list-controls
Using camera platform/vimc.0 Sensor B as cam0
Control: libcamera::Brightness: [-1.000000..1.000000]
Control: libcamera::Contrast: [0.000000..2.000000]
Control: libcamera::Saturation: [0.000000..2.000000]
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add vendor/namespace information to ControlId, so that the vendor can be
queried from it. This is expected to be used by applications either
simply to display the vendor or for it to be used for grouping in a
UI.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The delay values should be managed correctly. Not the dealys.
Correct accordingly.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This patch allows obtaining a black level from a tuning file in addition
to the camera sensor helper. If both of them define a black level, the
one from the tuning file takes precedence.
The use cases are:
- A user wants to use a different black level, for whatever reason.
- There is a sensor without known gains but with a known black level.
Because a camera sensor helper cannot be defined without specifying
gains, the only way to specify the black level is using the tuning
file. Software ISP uses its fallback gain handling in such a case.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The black level in software ISP is unconditionally guessed from the
obtained frames. CameraSensorHelper optionally provides the black level
from camera specifications now. Let's use the value if available.
If the black level is not available from the given CameraSensorHelper
instance, it's still determined on the fly.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Robert Mader <robert.mader@collabora.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Like the hardware pipelines do. Not clearing frameContexts otherwise can
trigger asserts like "Frame context for ... has been overwritten by ..."
when switching between cameras using the swISP, e.g. on phones.
Clearing the configuration and active state will become more important
with upcoming changes such as getting the black level from the camera
helper.
Fixes: 04d171e6b299 ("libcamera: software_isp: Call Algorithm::queueRequest")
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The tracepoints.h file is generated from the tracepoints.h.in template
by the gen-tp-header.py script. The template contains a {{year}}
placeholder for the copyright year, which the script fills with the
current year. This breaks reproducible builds with at least the openSUSE
debugsource package.
As the gen-tp-header.py script doesn't add any copyrightable contents to
the tracepoints.h file, fix this by replacing the {{year}} placeholder
with the year of the last copyright-worthy change to tracepoints.h.in.
Signed-off-by: Bernhard M. Wiedemann <bwiedemann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In the python bindings ControlTypePoint is not handled in the
corresponding conversion functions. Add that.
While at it, sort the listings in the same order as the enum in
controls.h.
Fixes: 200d535ca85f ("libcamera: controls: Add ControlTypePoint")
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The size member is missing in control_type<Point>. This did not do any
harm because the only control using the Point type was an array control.
As soon as a control-id with a non-array Point control gets defined, the
compile fails with:
error: size is not a member of libcamera::details::control_type<libcamera::Point>
Fixes: 200d535ca85f ("libcamera: controls: Add ControlTypePoint")
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Sometimes the ISP produces statistics only with a subset of statistic
types being valid. It doesn't happen normally, but was observed in the
wild. Check for the RKISP1_CIF_ISP_STAT_AWB bit to prevent using invalid
or outdated data. As it doesn't happen regularly add an error message to
get notified when it happens.
For simpler code structure, the ColourTemperature metadata entry gets
written unconditionally and overwritten later if needed.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Sometimes the ISP produces statistics only with a subset of statistic
types being valid. It doesn't happen normally, but was observed in the
wild. Check for the RKISP1_CIF_ISP_STAT_AUTOEXP bit to prevent using
invalid or outdated data. As it doesn't happen regularly add an error
message to get notified when it happens.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix typo in comment block formatting.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Alphabetical order of Forward declarations should be maintained hence,
'class V4L2Subdevice' should come after 'class SensorConfiguration'.
Fix it.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The 'found' flag was mistakenly understood that a compatible sensor
format has been found when a sensor configuration is passed in. However,
'found' related to the stream configuration's pixelformat, whether it is
supported by the RkISP1Path video node or not. It does not relate to the
sensor format, hence the check:
if (sensorConfig && !found)
doesn't make sense.
Rectify the above check with:
if (sensorConfig && !rawFormat.isValid())
to ensure a sensor format compatible with sensor configuration has been
set to rawFormat.
Fixes: 047d647452c4 ("libcamera: rkisp1: Integrate SensorConfiguration support")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
User-provided sensor configuration is never meant to be altered,
hence pass SensorConfiguration by `const` reference in
RkISP1Path::validate().
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The python venv module is the standard way of creating virtual python
environments. 'venv' is a commonly used name for the corresponding
directory. For example in the tuning docs we propose to execute 'python
-m venv venv' to setup a local virtual environment. During development
I often have these scattered around in the source tree and they show up
as untracked files in git. Add venv to .gitignore to prevent that.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Commit 761545407c76 ("pipeline: rkisp1: Filter out sensor sizes not
supported by the pipeline") introduced a mechanism to determine maximum
supported sensor resolution and filter out resolutions that cannot be
supported by the ISP.
However, it missed to update the raw stream configuration path, where
it should have clamped the raw stream configuration size to the maximum
sensor supported resolution.
This patch fixes the above issue and can be confirmed with IMX283
on i.MX8MP:
From:
($) cam -c1 -srole=raw,width=5472,height=3072
INFO Camera camera.cpp:1197 configuring streams: (0) 5472x3648-SRGGB12
ERROR RkISP1 rkisp1_path.cpp:425 Unable to configure capture in 5472x3648-SRGGB12
Failed to configure camera
Failed to start camera session
To:
($) cam -c1 -srole=raw,width=5472,height=3072
INFO Camera camera.cpp:1197 configuring streams: (0) 4096x3072-SRGGB12
cam0: Capture until user interrupts by SIGINT
536.082380 (0.00 fps) cam0-stream0 seq: 000000 bytesused: 25165824
536.182378 (10.00 fps) cam0-stream0 seq: 000001 bytesused: 25165824
536.282375 (10.00 fps) cam0-stream0 seq: 000002 bytesused: 25165824
...
Fixes: 761545407c76 ("pipeline: rkisp1: Filter out sensor sizes not supported by the pipeline")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
Integrate the RkISP1 pipeline handler to support sensor configuration
provided by applications through CameraConfiguration::sensorConfig.
The SensorConfiguration must be validated on both RkISP1Path (mainPath
and selfPath), so the parameters of RkISP1Path::validate() have been
updated to include sensorConfig.
The camera configuration will be marked as invalid when the sensor
configuration is supplied, if:
- Invalid sensor configuration (SensorConfiguration::isValid())
- Bit depth not supported by RkISP1 pipeline
- Sensor configuration output size is larger than maximum supported
sensor's size on RkISP1 pipeline
- No matching sensor configuration output size supplied by the sensor
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Tested-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
The Co-developed-by tag must be followed by a corresponding SoB line.
Enforce this rule in the git pre-push hook.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix the 'class FileSink' source link which got broken due to
commit 84ad104499d9e ("Move test applications to src/apps/").
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
In the case of an AWB search failure, the current algorithm logic will
return a point on the CT curve closest to where the search finisned.
This can be quite undesirable. Instead, add some bias params to the AWB
algorithm which will direct the search to a set CT value in the case
where statistics become unreliable causing the search to fail.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
A default CT of 4500K is used in a couple of places. Add a constexpr
value for the default CT value and use it instead.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The documentation of CameraConfiguration::validate() has one
misspelled "CameraConfiguration". Fix it.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
A minor wording improvement suggested on refactoring review.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In many cases a static string literal is used as key. Thus
having the argument type be `const std::string&` is suboptimal
since an `std::string` object needs to be constructed before
the call.
C++17 introduced `std::string_view`, using which the call
can be done with less overhead, as the `std::string_view`
is non-owning and may be passed in registers entirely.
So make `YamlObject::{contains,operator[]}` take the string keys
in `std::string_view`s.
Unfortunately, that is not sufficient yet, because `std::map::find()`
takes an reference to `const key_type`, which would be `const std::string&`
in the case of `YamlParser`. However, with a transparent comparator
such as `std::less<>` `std::map::find()` is able to accept any
object as the argument, and it forwards it to the comparator.
So make `YamlParser::dictionary_` use `std::less<>` as the comparator
to enable the use of `std::map::find()` with any type of argument.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Allow Android HAL adapter to pass the face detection metadata control to
the pipeline and also send face detection metadata to the camera client
if the pipeline generates it.
Signed-off-by: Yudhistira Erlandinata <yerlandinata@chromium.org>
Co-developed-by: Harvey Yang <chenghaoyang@chromium.org>
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Harvey Yang <chenghaoyang@chromium.org>
|
|
Add FaceDetectMode, FaceDetectFaceRectangles, FaceDetectFaceScores,
and FaceDetectFaceLandmark. Also add ControlTypePoint for supporting
FaceDetectFaceLandmark.
Signed-off-by: Yudhistira Erlandinata <yerlandinata@chromium.org>
Co-developed-by: Becker Hsieh <beckerh@chromium.org>
Co-developed-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Harvey Yang <chenghaoyang@chromium.org>
|
|
Add a control_type<> specialization for libcamera::Point to allow
storing data of that type in a ControlValue instance.
The new control type will be used by controls introduced in the
next patches.
Signed-off-by: Yudhistira Erlandinata <yerlandinata@chromium.org>
Co-developed-by: Becker Hsieh <beckerh@chromium.org>
Co-developed-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a constructor to the Rectangle class that accepts two points.
The constructed Rectangle spans all the space between the two given
points.
Signed-off-by: Yudhistira Erlandinata <yerlandinata@chromium.org>
Co-developed-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Harvey Yang <chenghaoyang@chromium.org>
|
|
The libcamera::Rectangle class allows defining rectangles regardless of
the orientation of the reference system where a rectangle is used in.
This implies that, depending on the reference system in use, the
rectangle's top-left corner, as defined by libcamera, doesn't correspond
to the visual top-left position.
^
|
| -------------------
| ^ | h
| | |
y| o---->-------------
| w
------------------------------->
(0,0) x
(0,0) x
------------------------------>
| w
y| o---->-------------
| | | h
| v |
| -------------------
|
V
Clarify that a Rectangle's top-left corner corresponds to the point
with the smaller x and y coordinates and that the horizontal and
vertical dimensions are obtained by positive increments along the
corresponding axes.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
As described in the coding style document, libcamera favours <cmath>
over <math.h>. Replace the last few occurrences of the latter with the
former and adapt the code accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
As described in the coding style document, libcamera favours <cmath>
over <math.h>. Replace the last few occurrences of the latter with the
former in the Raspberry Pi IPA and adapt the code accordingly. In some
cases, the <math.h> include is simply dropped as it isn't needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
As explained in the coding style document, usage of std::lround() is
preferred over lroundf() as it picks the correct function based on
the argument type. Replace calls to lroundf() with std::lround() through
libcamera.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
As explained in the coding style document, usage of std::abs() is
preferred over abs() or fabs() as it picks the correct function based on
the argument type. Replace calls to abs() and fabs() with std::abs() in
the Raspberry Pi algorithms.
This fixes a reported warning from clang:
../src/ipa/rpi/controller/rpi/awb.cpp:508:6: error: using integer absolute value function 'abs' when argument is of floating point type [-Werror,-Wabsolute-value]
if (abs(denominator) > eps) {
^
../src/ipa/rpi/controller/rpi/awb.cpp:508:6: note: use function 'std::abs' instead
if (abs(denominator) > eps) {
^~~
std::abs
Reported-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When constructing a ControlValue from an enum value, an explicit cast to
int32_t is needed as we use int32_t as the underlying type for all
enumerated controls. This makes users of ControlValue more complex. To
simplify them, specialize the control_type template for enum types, to
support construction of ControlValue directly without a cast.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The V4L2VideoDevice class implements setSelection() but not
getSelection(). The latter is useful for instance to query crop bounds.
Implement the function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
