summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--include/android/hardware/libhardware/include/hardware/camera3.h3093
-rw-r--r--include/android/hardware/libhardware/include/hardware/camera_common.h916
-rw-r--r--include/android/hardware/libhardware/include/hardware/fb.h173
-rw-r--r--include/android/hardware/libhardware/include/hardware/gralloc.h384
-rw-r--r--include/android/hardware/libhardware/include/hardware/hardware.h238
-rw-r--r--include/android/meson.build5
-rw-r--r--include/android/metadata/camera_metadata_hidden.h100
-rw-r--r--include/android/metadata/system/camera_metadata.h580
-rw-r--r--include/android/metadata/system/camera_metadata_tags.h1005
-rw-r--r--include/android/metadata/system/camera_vendor_tags.h158
-rw-r--r--include/android/system/core/include/android/log.h144
-rw-r--r--include/android/system/core/include/cutils/compiler.h44
-rw-r--r--include/android/system/core/include/cutils/native_handle.h69
-rw-r--r--include/android/system/core/include/system/camera.h298
-rw-r--r--include/android/system/core/include/system/graphics.h763
-rw-r--r--include/android/system/core/include/system/window.h954
-rw-r--r--include/meson.build1
17 files changed, 8925 insertions, 0 deletions
diff --git a/include/android/hardware/libhardware/include/hardware/camera3.h b/include/android/hardware/libhardware/include/hardware/camera3.h
new file mode 100644
index 00000000..49664dc3
--- /dev/null
+++ b/include/android/hardware/libhardware/include/hardware/camera3.h
@@ -0,0 +1,3093 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_CAMERA3_H
+#define ANDROID_INCLUDE_CAMERA3_H
+
+#include <system/camera_metadata.h>
+#include "camera_common.h"
+
+/**
+ * Camera device HAL 3.3 [ CAMERA_DEVICE_API_VERSION_3_3 ]
+ *
+ * This is the current recommended version of the camera device HAL.
+ *
+ * Supports the android.hardware.Camera API, and as of v3.2, the
+ * android.hardware.camera2 API in LIMITED or FULL modes.
+ *
+ * Camera devices that support this version of the HAL must return
+ * CAMERA_DEVICE_API_VERSION_3_3 in camera_device_t.common.version and in
+ * camera_info_t.device_version (from camera_module_t.get_camera_info).
+ *
+ * CAMERA_DEVICE_API_VERSION_3_3:
+ * Camera modules that may contain version 3.3 devices must implement at
+ * least version 2.2 of the camera module interface (as defined by
+ * camera_module_t.common.module_api_version).
+ *
+ * CAMERA_DEVICE_API_VERSION_3_2:
+ * Camera modules that may contain version 3.2 devices must implement at
+ * least version 2.2 of the camera module interface (as defined by
+ * camera_module_t.common.module_api_version).
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ * Camera modules that may contain version 3.1 (or 3.0) devices must
+ * implement at least version 2.0 of the camera module interface
+ * (as defined by camera_module_t.common.module_api_version).
+ *
+ * See camera_common.h for more versioning details.
+ *
+ * Documentation index:
+ * S1. Version history
+ * S2. Startup and operation sequencing
+ * S3. Operational modes
+ * S4. 3A modes and state machines
+ * S5. Cropping
+ * S6. Error management
+ * S7. Key Performance Indicator (KPI) glossary
+ * S8. Sample Use Cases
+ * S9. Notes on Controls and Metadata
+ * S10. Reprocessing flow and controls
+ */
+
+/**
+ * S1. Version history:
+ *
+ * 1.0: Initial Android camera HAL (Android 4.0) [camera.h]:
+ *
+ * - Converted from C++ CameraHardwareInterface abstraction layer.
+ *
+ * - Supports android.hardware.Camera API.
+ *
+ * 2.0: Initial release of expanded-capability HAL (Android 4.2) [camera2.h]:
+ *
+ * - Sufficient for implementing existing android.hardware.Camera API.
+ *
+ * - Allows for ZSL queue in camera service layer
+ *
+ * - Not tested for any new features such manual capture control, Bayer RAW
+ * capture, reprocessing of RAW data.
+ *
+ * 3.0: First revision of expanded-capability HAL:
+ *
+ * - Major version change since the ABI is completely different. No change to
+ * the required hardware capabilities or operational model from 2.0.
+ *
+ * - Reworked input request and stream queue interfaces: Framework calls into
+ * HAL with next request and stream buffers already dequeued. Sync framework
+ * support is included, necessary for efficient implementations.
+ *
+ * - Moved triggers into requests, most notifications into results.
+ *
+ * - Consolidated all callbacks into framework into one structure, and all
+ * setup methods into a single initialize() call.
+ *
+ * - Made stream configuration into a single call to simplify stream
+ * management. Bidirectional streams replace STREAM_FROM_STREAM construct.
+ *
+ * - Limited mode semantics for older/limited hardware devices.
+ *
+ * 3.1: Minor revision of expanded-capability HAL:
+ *
+ * - configure_streams passes consumer usage flags to the HAL.
+ *
+ * - flush call to drop all in-flight requests/buffers as fast as possible.
+ *
+ * 3.2: Minor revision of expanded-capability HAL:
+ *
+ * - Deprecates get_metadata_vendor_tag_ops. Please use get_vendor_tag_ops
+ * in camera_common.h instead.
+ *
+ * - register_stream_buffers deprecated. All gralloc buffers provided
+ * by framework to HAL in process_capture_request may be new at any time.
+ *
+ * - add partial result support. process_capture_result may be called
+ * multiple times with a subset of the available result before the full
+ * result is available.
+ *
+ * - add manual template to camera3_request_template. The applications may
+ * use this template to control the capture settings directly.
+ *
+ * - Rework the bidirectional and input stream specifications.
+ *
+ * - change the input buffer return path. The buffer is returned in
+ * process_capture_result instead of process_capture_request.
+ *
+ * 3.3: Minor revision of expanded-capability HAL:
+ *
+ * - OPAQUE and YUV reprocessing API updates.
+ *
+ * - Basic support for depth output buffers.
+ *
+ * - Addition of data_space field to camera3_stream_t.
+ *
+ * - Addition of rotation field to camera3_stream_t.
+ *
+ * - Addition of camera3 stream configuration operation mode to camera3_stream_configuration_t
+ *
+ */
+
+/**
+ * S2. Startup and general expected operation sequence:
+ *
+ * 1. Framework calls camera_module_t->common.open(), which returns a
+ * hardware_device_t structure.
+ *
+ * 2. Framework inspects the hardware_device_t->version field, and instantiates
+ * the appropriate handler for that version of the camera hardware device. In
+ * case the version is CAMERA_DEVICE_API_VERSION_3_0, the device is cast to
+ * a camera3_device_t.
+ *
+ * 3. Framework calls camera3_device_t->ops->initialize() with the framework
+ * callback function pointers. This will only be called this one time after
+ * open(), before any other functions in the ops structure are called.
+ *
+ * 4. The framework calls camera3_device_t->ops->configure_streams() with a list
+ * of input/output streams to the HAL device.
+ *
+ * 5. <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * The framework allocates gralloc buffers and calls
+ * camera3_device_t->ops->register_stream_buffers() for at least one of the
+ * output streams listed in configure_streams. The same stream is registered
+ * only once.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * camera3_device_t->ops->register_stream_buffers() is not called and must
+ * be NULL.
+ *
+ * 6. The framework requests default settings for some number of use cases with
+ * calls to camera3_device_t->ops->construct_default_request_settings(). This
+ * may occur any time after step 3.
+ *
+ * 7. The framework constructs and sends the first capture request to the HAL,
+ * with settings based on one of the sets of default settings, and with at
+ * least one output stream, which has been registered earlier by the
+ * framework. This is sent to the HAL with
+ * camera3_device_t->ops->process_capture_request(). The HAL must block the
+ * return of this call until it is ready for the next request to be sent.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * The buffer_handle_t provided in the camera3_stream_buffer_t array
+ * in the camera3_capture_request_t may be new and never-before-seen
+ * by the HAL on any given new request.
+ *
+ * 8. The framework continues to submit requests, and call
+ * construct_default_request_settings to get default settings buffers for
+ * other use cases.
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * The framework may call register_stream_buffers() at this time for
+ * not-yet-registered streams.
+ *
+ * 9. When the capture of a request begins (sensor starts exposing for the
+ * capture) or processing a reprocess request begins, the HAL
+ * calls camera3_callback_ops_t->notify() with the SHUTTER event, including
+ * the frame number and the timestamp for start of exposure. For a reprocess
+ * request, the timestamp must be the start of exposure of the input image
+ * which can be looked up with android.sensor.timestamp from
+ * camera3_capture_request_t.settings when process_capture_request() is
+ * called.
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * This notify call must be made before the first call to
+ * process_capture_result() for that frame number.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * The camera3_callback_ops_t->notify() call with the SHUTTER event should
+ * be made as early as possible since the framework will be unable to
+ * deliver gralloc buffers to the application layer (for that frame) until
+ * it has a valid timestamp for the start of exposure (or the input image's
+ * start of exposure for a reprocess request).
+ *
+ * Both partial metadata results and the gralloc buffers may be sent to the
+ * framework at any time before or after the SHUTTER event.
+ *
+ * 10. After some pipeline delay, the HAL begins to return completed captures to
+ * the framework with camera3_callback_ops_t->process_capture_result(). These
+ * are returned in the same order as the requests were submitted. Multiple
+ * requests can be in flight at once, depending on the pipeline depth of the
+ * camera HAL device.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Once a buffer is returned by process_capture_result as part of the
+ * camera3_stream_buffer_t array, and the fence specified by release_fence
+ * has been signaled (this is a no-op for -1 fences), the ownership of that
+ * buffer is considered to be transferred back to the framework. After that,
+ * the HAL must no longer retain that particular buffer, and the
+ * framework may clean up the memory for it immediately.
+ *
+ * process_capture_result may be called multiple times for a single frame,
+ * each time with a new disjoint piece of metadata and/or set of gralloc
+ * buffers. The framework will accumulate these partial metadata results
+ * into one result.
+ *
+ * In particular, it is legal for a process_capture_result to be called
+ * simultaneously for both a frame N and a frame N+1 as long as the
+ * above rule holds for gralloc buffers (both input and output).
+ *
+ * 11. After some time, the framework may stop submitting new requests, wait for
+ * the existing captures to complete (all buffers filled, all results
+ * returned), and then call configure_streams() again. This resets the camera
+ * hardware and pipeline for a new set of input/output streams. Some streams
+ * may be reused from the previous configuration; if these streams' buffers
+ * had already been registered with the HAL, they will not be registered
+ * again. The framework then continues from step 7, if at least one
+ * registered output stream remains (otherwise, step 5 is required first).
+ *
+ * 12. Alternatively, the framework may call camera3_device_t->common->close()
+ * to end the camera session. This may be called at any time when no other
+ * calls from the framework are active, although the call may block until all
+ * in-flight captures have completed (all results returned, all buffers
+ * filled). After the close call returns, no more calls to the
+ * camera3_callback_ops_t functions are allowed from the HAL. Once the
+ * close() call is underway, the framework may not call any other HAL device
+ * functions.
+ *
+ * 13. In case of an error or other asynchronous event, the HAL must call
+ * camera3_callback_ops_t->notify() with the appropriate error/event
+ * message. After returning from a fatal device-wide error notification, the
+ * HAL should act as if close() had been called on it. However, the HAL must
+ * either cancel or complete all outstanding captures before calling
+ * notify(), so that once notify() is called with a fatal error, the
+ * framework will not receive further callbacks from the device. Methods
+ * besides close() should return -ENODEV or NULL after the notify() method
+ * returns from a fatal error message.
+ */
+
+/**
+ * S3. Operational modes:
+ *
+ * The camera 3 HAL device can implement one of two possible operational modes;
+ * limited and full. Full support is expected from new higher-end
+ * devices. Limited mode has hardware requirements roughly in line with those
+ * for a camera HAL device v1 implementation, and is expected from older or
+ * inexpensive devices. Full is a strict superset of limited, and they share the
+ * same essential operational flow, as documented above.
+ *
+ * The HAL must indicate its level of support with the
+ * android.info.supportedHardwareLevel static metadata entry, with 0 indicating
+ * limited mode, and 1 indicating full mode support.
+ *
+ * Roughly speaking, limited-mode devices do not allow for application control
+ * of capture settings (3A control only), high-rate capture of high-resolution
+ * images, raw sensor readout, or support for YUV output streams above maximum
+ * recording resolution (JPEG only for large images).
+ *
+ * ** Details of limited mode behavior:
+ *
+ * - Limited-mode devices do not need to implement accurate synchronization
+ * between capture request settings and the actual image data
+ * captured. Instead, changes to settings may take effect some time in the
+ * future, and possibly not for the same output frame for each settings
+ * entry. Rapid changes in settings may result in some settings never being
+ * used for a capture. However, captures that include high-resolution output
+ * buffers ( > 1080p ) have to use the settings as specified (but see below
+ * for processing rate).
+ *
+ * - Limited-mode devices do not need to support most of the
+ * settings/result/static info metadata. Specifically, only the following settings
+ * are expected to be consumed or produced by a limited-mode HAL device:
+ *
+ * android.control.aeAntibandingMode (controls and dynamic)
+ * android.control.aeExposureCompensation (controls and dynamic)
+ * android.control.aeLock (controls and dynamic)
+ * android.control.aeMode (controls and dynamic)
+ * android.control.aeRegions (controls and dynamic)
+ * android.control.aeTargetFpsRange (controls and dynamic)
+ * android.control.aePrecaptureTrigger (controls and dynamic)
+ * android.control.afMode (controls and dynamic)
+ * android.control.afRegions (controls and dynamic)
+ * android.control.awbLock (controls and dynamic)
+ * android.control.awbMode (controls and dynamic)
+ * android.control.awbRegions (controls and dynamic)
+ * android.control.captureIntent (controls and dynamic)
+ * android.control.effectMode (controls and dynamic)
+ * android.control.mode (controls and dynamic)
+ * android.control.sceneMode (controls and dynamic)
+ * android.control.videoStabilizationMode (controls and dynamic)
+ * android.control.aeAvailableAntibandingModes (static)
+ * android.control.aeAvailableModes (static)
+ * android.control.aeAvailableTargetFpsRanges (static)
+ * android.control.aeCompensationRange (static)
+ * android.control.aeCompensationStep (static)
+ * android.control.afAvailableModes (static)
+ * android.control.availableEffects (static)
+ * android.control.availableSceneModes (static)
+ * android.control.availableVideoStabilizationModes (static)
+ * android.control.awbAvailableModes (static)
+ * android.control.maxRegions (static)
+ * android.control.sceneModeOverrides (static)
+ * android.control.aeState (dynamic)
+ * android.control.afState (dynamic)
+ * android.control.awbState (dynamic)
+ *
+ * android.flash.mode (controls and dynamic)
+ * android.flash.info.available (static)
+ *
+ * android.info.supportedHardwareLevel (static)
+ *
+ * android.jpeg.gpsCoordinates (controls and dynamic)
+ * android.jpeg.gpsProcessingMethod (controls and dynamic)
+ * android.jpeg.gpsTimestamp (controls and dynamic)
+ * android.jpeg.orientation (controls and dynamic)
+ * android.jpeg.quality (controls and dynamic)
+ * android.jpeg.thumbnailQuality (controls and dynamic)
+ * android.jpeg.thumbnailSize (controls and dynamic)
+ * android.jpeg.availableThumbnailSizes (static)
+ * android.jpeg.maxSize (static)
+ *
+ * android.lens.info.minimumFocusDistance (static)
+ *
+ * android.request.id (controls and dynamic)
+ *
+ * android.scaler.cropRegion (controls and dynamic)
+ * android.scaler.availableStreamConfigurations (static)
+ * android.scaler.availableMinFrameDurations (static)
+ * android.scaler.availableStallDurations (static)
+ * android.scaler.availableMaxDigitalZoom (static)
+ * android.scaler.maxDigitalZoom (static)
+ * android.scaler.croppingType (static)
+ *
+ * android.sensor.orientation (static)
+ * android.sensor.timestamp (dynamic)
+ *
+ * android.statistics.faceDetectMode (controls and dynamic)
+ * android.statistics.info.availableFaceDetectModes (static)
+ * android.statistics.faceIds (dynamic)
+ * android.statistics.faceLandmarks (dynamic)
+ * android.statistics.faceRectangles (dynamic)
+ * android.statistics.faceScores (dynamic)
+ *
+ * android.sync.frameNumber (dynamic)
+ * android.sync.maxLatency (static)
+ *
+ * - Captures in limited mode that include high-resolution (> 1080p) output
+ * buffers may block in process_capture_request() until all the output buffers
+ * have been filled. A full-mode HAL device must process sequences of
+ * high-resolution requests at the rate indicated in the static metadata for
+ * that pixel format. The HAL must still call process_capture_result() to
+ * provide the output; the framework must simply be prepared for
+ * process_capture_request() to block until after process_capture_result() for
+ * that request completes for high-resolution captures for limited-mode
+ * devices.
+ *
+ * - Full-mode devices must support below additional capabilities:
+ * - 30fps at maximum resolution is preferred, more than 20fps is required.
+ * - Per frame control (android.sync.maxLatency == PER_FRAME_CONTROL).
+ * - Sensor manual control metadata. See MANUAL_SENSOR defined in
+ * android.request.availableCapabilities.
+ * - Post-processing manual control metadata. See MANUAL_POST_PROCESSING defined
+ * in android.request.availableCapabilities.
+ *
+ */
+
+/**
+ * S4. 3A modes and state machines:
+ *
+ * While the actual 3A algorithms are up to the HAL implementation, a high-level
+ * state machine description is defined by the HAL interface, to allow the HAL
+ * device and the framework to communicate about the current state of 3A, and to
+ * trigger 3A events.
+ *
+ * When the device is opened, all the individual 3A states must be
+ * STATE_INACTIVE. Stream configuration does not reset 3A. For example, locked
+ * focus must be maintained across the configure() call.
+ *
+ * Triggering a 3A action involves simply setting the relevant trigger entry in
+ * the settings for the next request to indicate start of trigger. For example,
+ * the trigger for starting an autofocus scan is setting the entry
+ * ANDROID_CONTROL_AF_TRIGGER to ANDROID_CONTROL_AF_TRIGGER_START for one
+ * request, and cancelling an autofocus scan is triggered by setting
+ * ANDROID_CONTROL_AF_TRIGGER to ANDROID_CONTRL_AF_TRIGGER_CANCEL. Otherwise,
+ * the entry will not exist, or be set to ANDROID_CONTROL_AF_TRIGGER_IDLE. Each
+ * request with a trigger entry set to a non-IDLE value will be treated as an
+ * independent triggering event.
+ *
+ * At the top level, 3A is controlled by the ANDROID_CONTROL_MODE setting, which
+ * selects between no 3A (ANDROID_CONTROL_MODE_OFF), normal AUTO mode
+ * (ANDROID_CONTROL_MODE_AUTO), and using the scene mode setting
+ * (ANDROID_CONTROL_USE_SCENE_MODE).
+ *
+ * - In OFF mode, each of the individual AE/AF/AWB modes are effectively OFF,
+ * and none of the capture controls may be overridden by the 3A routines.
+ *
+ * - In AUTO mode, Auto-focus, auto-exposure, and auto-whitebalance all run
+ * their own independent algorithms, and have their own mode, state, and
+ * trigger metadata entries, as listed in the next section.
+ *
+ * - In USE_SCENE_MODE, the value of the ANDROID_CONTROL_SCENE_MODE entry must
+ * be used to determine the behavior of 3A routines. In SCENE_MODEs other than
+ * FACE_PRIORITY, the HAL must override the values of
+ * ANDROId_CONTROL_AE/AWB/AF_MODE to be the mode it prefers for the selected
+ * SCENE_MODE. For example, the HAL may prefer SCENE_MODE_NIGHT to use
+ * CONTINUOUS_FOCUS AF mode. Any user selection of AE/AWB/AF_MODE when scene
+ * must be ignored for these scene modes.
+ *
+ * - For SCENE_MODE_FACE_PRIORITY, the AE/AWB/AF_MODE controls work as in
+ * ANDROID_CONTROL_MODE_AUTO, but the 3A routines must bias toward metering
+ * and focusing on any detected faces in the scene.
+ *
+ * S4.1. Auto-focus settings and result entries:
+ *
+ * Main metadata entries:
+ *
+ * ANDROID_CONTROL_AF_MODE: Control for selecting the current autofocus
+ * mode. Set by the framework in the request settings.
+ *
+ * AF_MODE_OFF: AF is disabled; the framework/app directly controls lens
+ * position.
+ *
+ * AF_MODE_AUTO: Single-sweep autofocus. No lens movement unless AF is
+ * triggered.
+ *
+ * AF_MODE_MACRO: Single-sweep up-close autofocus. No lens movement unless
+ * AF is triggered.
+ *
+ * AF_MODE_CONTINUOUS_VIDEO: Smooth continuous focusing, for recording
+ * video. Triggering immediately locks focus in current
+ * position. Canceling resumes cotinuous focusing.
+ *
+ * AF_MODE_CONTINUOUS_PICTURE: Fast continuous focusing, for
+ * zero-shutter-lag still capture. Triggering locks focus once currently
+ * active sweep concludes. Canceling resumes continuous focusing.
+ *
+ * AF_MODE_EDOF: Advanced extended depth of field focusing. There is no
+ * autofocus scan, so triggering one or canceling one has no effect.
+ * Images are focused automatically by the HAL.
+ *
+ * ANDROID_CONTROL_AF_STATE: Dynamic metadata describing the current AF
+ * algorithm state, reported by the HAL in the result metadata.
+ *
+ * AF_STATE_INACTIVE: No focusing has been done, or algorithm was
+ * reset. Lens is not moving. Always the state for MODE_OFF or MODE_EDOF.
+ * When the device is opened, it must start in this state.
+ *
+ * AF_STATE_PASSIVE_SCAN: A continuous focus algorithm is currently scanning
+ * for good focus. The lens is moving.
+ *
+ * AF_STATE_PASSIVE_FOCUSED: A continuous focus algorithm believes it is
+ * well focused. The lens is not moving. The HAL may spontaneously leave
+ * this state.
+ *
+ * AF_STATE_PASSIVE_UNFOCUSED: A continuous focus algorithm believes it is
+ * not well focused. The lens is not moving. The HAL may spontaneously
+ * leave this state.
+ *
+ * AF_STATE_ACTIVE_SCAN: A scan triggered by the user is underway.
+ *
+ * AF_STATE_FOCUSED_LOCKED: The AF algorithm believes it is focused. The
+ * lens is not moving.
+ *
+ * AF_STATE_NOT_FOCUSED_LOCKED: The AF algorithm has been unable to
+ * focus. The lens is not moving.
+ *
+ * ANDROID_CONTROL_AF_TRIGGER: Control for starting an autofocus scan, the
+ * meaning of which is mode- and state- dependent. Set by the framework in
+ * the request settings.
+ *
+ * AF_TRIGGER_IDLE: No current trigger.
+ *
+ * AF_TRIGGER_START: Trigger start of AF scan. Effect is mode and state
+ * dependent.
+ *
+ * AF_TRIGGER_CANCEL: Cancel current AF scan if any, and reset algorithm to
+ * default.
+ *
+ * Additional metadata entries:
+ *
+ * ANDROID_CONTROL_AF_REGIONS: Control for selecting the regions of the FOV
+ * that should be used to determine good focus. This applies to all AF
+ * modes that scan for focus. Set by the framework in the request
+ * settings.
+ *
+ * S4.2. Auto-exposure settings and result entries:
+ *
+ * Main metadata entries:
+ *
+ * ANDROID_CONTROL_AE_MODE: Control for selecting the current auto-exposure
+ * mode. Set by the framework in the request settings.
+ *
+ * AE_MODE_OFF: Autoexposure is disabled; the user controls exposure, gain,
+ * frame duration, and flash.
+ *
+ * AE_MODE_ON: Standard autoexposure, with flash control disabled. User may
+ * set flash to fire or to torch mode.
+ *
+ * AE_MODE_ON_AUTO_FLASH: Standard autoexposure, with flash on at HAL's
+ * discretion for precapture and still capture. User control of flash
+ * disabled.
+ *
+ * AE_MODE_ON_ALWAYS_FLASH: Standard autoexposure, with flash always fired
+ * for capture, and at HAL's discretion for precapture.. User control of
+ * flash disabled.
+ *
+ * AE_MODE_ON_AUTO_FLASH_REDEYE: Standard autoexposure, with flash on at
+ * HAL's discretion for precapture and still capture. Use a flash burst
+ * at end of precapture sequence to reduce redeye in the final
+ * picture. User control of flash disabled.
+ *
+ * ANDROID_CONTROL_AE_STATE: Dynamic metadata describing the current AE
+ * algorithm state, reported by the HAL in the result metadata.
+ *
+ * AE_STATE_INACTIVE: Initial AE state after mode switch. When the device is
+ * opened, it must start in this state.
+ *
+ * AE_STATE_SEARCHING: AE is not converged to a good value, and is adjusting
+ * exposure parameters.
+ *
+ * AE_STATE_CONVERGED: AE has found good exposure values for the current
+ * scene, and the exposure parameters are not changing. HAL may
+ * spontaneously leave this state to search for better solution.
+ *
+ * AE_STATE_LOCKED: AE has been locked with the AE_LOCK control. Exposure
+ * values are not changing.
+ *
+ * AE_STATE_FLASH_REQUIRED: The HAL has converged exposure, but believes
+ * flash is required for a sufficiently bright picture. Used for
+ * determining if a zero-shutter-lag frame can be used.
+ *
+ * AE_STATE_PRECAPTURE: The HAL is in the middle of a precapture
+ * sequence. Depending on AE mode, this mode may involve firing the
+ * flash for metering, or a burst of flash pulses for redeye reduction.
+ *
+ * ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER: Control for starting a metering
+ * sequence before capturing a high-quality image. Set by the framework in
+ * the request settings.
+ *
+ * PRECAPTURE_TRIGGER_IDLE: No current trigger.
+ *
+ * PRECAPTURE_TRIGGER_START: Start a precapture sequence. The HAL should
+ * use the subsequent requests to measure good exposure/white balance
+ * for an upcoming high-resolution capture.
+ *
+ * Additional metadata entries:
+ *
+ * ANDROID_CONTROL_AE_LOCK: Control for locking AE controls to their current
+ * values
+ *
+ * ANDROID_CONTROL_AE_EXPOSURE_COMPENSATION: Control for adjusting AE
+ * algorithm target brightness point.
+ *
+ * ANDROID_CONTROL_AE_TARGET_FPS_RANGE: Control for selecting the target frame
+ * rate range for the AE algorithm. The AE routine cannot change the frame
+ * rate to be outside these bounds.
+ *
+ * ANDROID_CONTROL_AE_REGIONS: Control for selecting the regions of the FOV
+ * that should be used to determine good exposure levels. This applies to
+ * all AE modes besides OFF.
+ *
+ * S4.3. Auto-whitebalance settings and result entries:
+ *
+ * Main metadata entries:
+ *
+ * ANDROID_CONTROL_AWB_MODE: Control for selecting the current white-balance
+ * mode.
+ *
+ * AWB_MODE_OFF: Auto-whitebalance is disabled. User controls color matrix.
+ *
+ * AWB_MODE_AUTO: Automatic white balance is enabled; 3A controls color
+ * transform, possibly using more complex transforms than a simple
+ * matrix.
+ *
+ * AWB_MODE_INCANDESCENT: Fixed white balance settings good for indoor
+ * incandescent (tungsten) lighting, roughly 2700K.
+ *
+ * AWB_MODE_FLUORESCENT: Fixed white balance settings good for fluorescent
+ * lighting, roughly 5000K.
+ *
+ * AWB_MODE_WARM_FLUORESCENT: Fixed white balance settings good for
+ * fluorescent lighting, roughly 3000K.
+ *
+ * AWB_MODE_DAYLIGHT: Fixed white balance settings good for daylight,
+ * roughly 5500K.
+ *
+ * AWB_MODE_CLOUDY_DAYLIGHT: Fixed white balance settings good for clouded
+ * daylight, roughly 6500K.
+ *
+ * AWB_MODE_TWILIGHT: Fixed white balance settings good for
+ * near-sunset/sunrise, roughly 15000K.
+ *
+ * AWB_MODE_SHADE: Fixed white balance settings good for areas indirectly
+ * lit by the sun, roughly 7500K.
+ *
+ * ANDROID_CONTROL_AWB_STATE: Dynamic metadata describing the current AWB
+ * algorithm state, reported by the HAL in the result metadata.
+ *
+ * AWB_STATE_INACTIVE: Initial AWB state after mode switch. When the device
+ * is opened, it must start in this state.
+ *
+ * AWB_STATE_SEARCHING: AWB is not converged to a good value, and is
+ * changing color adjustment parameters.
+ *
+ * AWB_STATE_CONVERGED: AWB has found good color adjustment values for the
+ * current scene, and the parameters are not changing. HAL may
+ * spontaneously leave this state to search for better solution.
+ *
+ * AWB_STATE_LOCKED: AWB has been locked with the AWB_LOCK control. Color
+ * adjustment values are not changing.
+ *
+ * Additional metadata entries:
+ *
+ * ANDROID_CONTROL_AWB_LOCK: Control for locking AWB color adjustments to
+ * their current values.
+ *
+ * ANDROID_CONTROL_AWB_REGIONS: Control for selecting the regions of the FOV
+ * that should be used to determine good color balance. This applies only
+ * to auto-WB mode.
+ *
+ * S4.4. General state machine transition notes
+ *
+ * Switching between AF, AE, or AWB modes always resets the algorithm's state
+ * to INACTIVE. Similarly, switching between CONTROL_MODE or
+ * CONTROL_SCENE_MODE if CONTROL_MODE == USE_SCENE_MODE resets all the
+ * algorithm states to INACTIVE.
+ *
+ * The tables below are per-mode.
+ *
+ * S4.5. AF state machines
+ *
+ * when enabling AF or changing AF mode
+ *| state | trans. cause | new state | notes |
+ *+--------------------+---------------+--------------------+------------------+
+ *| Any | AF mode change| INACTIVE | |
+ *+--------------------+---------------+--------------------+------------------+
+ *
+ * mode = AF_MODE_OFF or AF_MODE_EDOF
+ *| state | trans. cause | new state | notes |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | | INACTIVE | Never changes |
+ *+--------------------+---------------+--------------------+------------------+
+ *
+ * mode = AF_MODE_AUTO or AF_MODE_MACRO
+ *| state | trans. cause | new state | notes |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | AF_TRIGGER | ACTIVE_SCAN | Start AF sweep |
+ *| | | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| ACTIVE_SCAN | AF sweep done | FOCUSED_LOCKED | If AF successful |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| ACTIVE_SCAN | AF sweep done | NOT_FOCUSED_LOCKED | If AF successful |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| ACTIVE_SCAN | AF_CANCEL | INACTIVE | Cancel/reset AF |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Cancel/reset AF |
+ *+--------------------+---------------+--------------------+------------------+
+ *| FOCUSED_LOCKED | AF_TRIGGER | ACTIVE_SCAN | Start new sweep |
+ *| | | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Cancel/reset AF |
+ *+--------------------+---------------+--------------------+------------------+
+ *| NOT_FOCUSED_LOCKED | AF_TRIGGER | ACTIVE_SCAN | Start new sweep |
+ *| | | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| All states | mode change | INACTIVE | |
+ *+--------------------+---------------+--------------------+------------------+
+ *
+ * mode = AF_MODE_CONTINUOUS_VIDEO
+ *| state | trans. cause | new state | notes |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | HAL initiates | PASSIVE_SCAN | Start AF scan |
+ *| | new scan | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | AF_TRIGGER | NOT_FOCUSED_LOCKED | AF state query |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | HAL completes | PASSIVE_FOCUSED | End AF scan |
+ *| | current scan | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | HAL fails | PASSIVE_UNFOCUSED | End AF scan |
+ *| | current scan | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | AF_TRIGGER | FOCUSED_LOCKED | Immediate trans. |
+ *| | | | if focus is good |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate trans. |
+ *| | | | if focus is bad |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | AF_CANCEL | INACTIVE | Reset lens |
+ *| | | | position |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_FOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan |
+ *| | new scan | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_UNFOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan |
+ *| | new scan | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_FOCUSED | AF_TRIGGER | FOCUSED_LOCKED | Immediate trans. |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_UNFOCUSED | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate trans. |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| FOCUSED_LOCKED | AF_TRIGGER | FOCUSED_LOCKED | No effect |
+ *+--------------------+---------------+--------------------+------------------+
+ *| FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan |
+ *+--------------------+---------------+--------------------+------------------+
+ *| NOT_FOCUSED_LOCKED | AF_TRIGGER | NOT_FOCUSED_LOCKED | No effect |
+ *+--------------------+---------------+--------------------+------------------+
+ *| NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan |
+ *+--------------------+---------------+--------------------+------------------+
+ *
+ * mode = AF_MODE_CONTINUOUS_PICTURE
+ *| state | trans. cause | new state | notes |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | HAL initiates | PASSIVE_SCAN | Start AF scan |
+ *| | new scan | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | AF_TRIGGER | NOT_FOCUSED_LOCKED | AF state query |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | HAL completes | PASSIVE_FOCUSED | End AF scan |
+ *| | current scan | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | HAL fails | PASSIVE_UNFOCUSED | End AF scan |
+ *| | current scan | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | AF_TRIGGER | FOCUSED_LOCKED | Eventual trans. |
+ *| | | | once focus good |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | AF_TRIGGER | NOT_FOCUSED_LOCKED | Eventual trans. |
+ *| | | | if cannot focus |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | AF_CANCEL | INACTIVE | Reset lens |
+ *| | | | position |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_FOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan |
+ *| | new scan | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_UNFOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan |
+ *| | new scan | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_FOCUSED | AF_TRIGGER | FOCUSED_LOCKED | Immediate trans. |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_UNFOCUSED | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate trans. |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| FOCUSED_LOCKED | AF_TRIGGER | FOCUSED_LOCKED | No effect |
+ *+--------------------+---------------+--------------------+------------------+
+ *| FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan |
+ *+--------------------+---------------+--------------------+------------------+
+ *| NOT_FOCUSED_LOCKED | AF_TRIGGER | NOT_FOCUSED_LOCKED | No effect |
+ *+--------------------+---------------+--------------------+------------------+
+ *| NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan |
+ *+--------------------+---------------+--------------------+------------------+
+ *
+ * S4.6. AE and AWB state machines
+ *
+ * The AE and AWB state machines are mostly identical. AE has additional
+ * FLASH_REQUIRED and PRECAPTURE states. So rows below that refer to those two
+ * states should be ignored for the AWB state machine.
+ *
+ * when enabling AE/AWB or changing AE/AWB mode
+ *| state | trans. cause | new state | notes |
+ *+--------------------+---------------+--------------------+------------------+
+ *| Any | mode change | INACTIVE | |
+ *+--------------------+---------------+--------------------+------------------+
+ *
+ * mode = AE_MODE_OFF / AWB mode not AUTO
+ *| state | trans. cause | new state | notes |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | | INACTIVE | AE/AWB disabled |
+ *+--------------------+---------------+--------------------+------------------+
+ *
+ * mode = AE_MODE_ON_* / AWB_MODE_AUTO
+ *| state | trans. cause | new state | notes |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | HAL initiates | SEARCHING | |
+ *| | AE/AWB scan | | |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | AE/AWB_LOCK | LOCKED | values locked |
+ *| | on | | |
+ *+--------------------+---------------+--------------------+------------------+
+ *| SEARCHING | HAL finishes | CONVERGED | good values, not |
+ *| | AE/AWB scan | | changing |
+ *+--------------------+---------------+--------------------+------------------+
+ *| SEARCHING | HAL finishes | FLASH_REQUIRED | converged but too|
+ *| | AE scan | | dark w/o flash |
+ *+--------------------+---------------+--------------------+------------------+
+ *| SEARCHING | AE/AWB_LOCK | LOCKED | values locked |
+ *| | on | | |
+ *+--------------------+---------------+--------------------+------------------+
+ *| CONVERGED | HAL initiates | SEARCHING | values locked |
+ *| | AE/AWB scan | | |
+ *+--------------------+---------------+--------------------+------------------+
+ *| CONVERGED | AE/AWB_LOCK | LOCKED | values locked |
+ *| | on | | |
+ *+--------------------+---------------+--------------------+------------------+
+ *| FLASH_REQUIRED | HAL initiates | SEARCHING | values locked |
+ *| | AE/AWB scan | | |
+ *+--------------------+---------------+--------------------+------------------+
+ *| FLASH_REQUIRED | AE/AWB_LOCK | LOCKED | values locked |
+ *| | on | | |
+ *+--------------------+---------------+--------------------+------------------+
+ *| LOCKED | AE/AWB_LOCK | SEARCHING | values not good |
+ *| | off | | after unlock |
+ *+--------------------+---------------+--------------------+------------------+
+ *| LOCKED | AE/AWB_LOCK | CONVERGED | values good |
+ *| | off | | after unlock |
+ *+--------------------+---------------+--------------------+------------------+
+ *| LOCKED | AE_LOCK | FLASH_REQUIRED | exposure good, |
+ *| | off | | but too dark |
+ *+--------------------+---------------+--------------------+------------------+
+ *| All AE states | PRECAPTURE_ | PRECAPTURE | Start precapture |
+ *| | START | | sequence |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PRECAPTURE | Sequence done.| CONVERGED | Ready for high- |
+ *| | AE_LOCK off | | quality capture |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PRECAPTURE | Sequence done.| LOCKED | Ready for high- |
+ *| | AE_LOCK on | | quality capture |
+ *+--------------------+---------------+--------------------+------------------+
+ *
+ */
+
+/**
+ * S5. Cropping:
+ *
+ * Cropping of the full pixel array (for digital zoom and other use cases where
+ * a smaller FOV is desirable) is communicated through the
+ * ANDROID_SCALER_CROP_REGION setting. This is a per-request setting, and can
+ * change on a per-request basis, which is critical for implementing smooth
+ * digital zoom.
+ *
+ * The region is defined as a rectangle (x, y, width, height), with (x, y)
+ * describing the top-left corner of the rectangle. The rectangle is defined on
+ * the coordinate system of the sensor active pixel array, with (0,0) being the
+ * top-left pixel of the active pixel array. Therefore, the width and height
+ * cannot be larger than the dimensions reported in the
+ * ANDROID_SENSOR_ACTIVE_PIXEL_ARRAY static info field. The minimum allowed
+ * width and height are reported by the HAL through the
+ * ANDROID_SCALER_MAX_DIGITAL_ZOOM static info field, which describes the
+ * maximum supported zoom factor. Therefore, the minimum crop region width and
+ * height are:
+ *
+ * {width, height} =
+ * { floor(ANDROID_SENSOR_ACTIVE_PIXEL_ARRAY[0] /
+ * ANDROID_SCALER_MAX_DIGITAL_ZOOM),
+ * floor(ANDROID_SENSOR_ACTIVE_PIXEL_ARRAY[1] /
+ * ANDROID_SCALER_MAX_DIGITAL_ZOOM) }
+ *
+ * If the crop region needs to fulfill specific requirements (for example, it
+ * needs to start on even coordinates, and its width/height needs to be even),
+ * the HAL must do the necessary rounding and write out the final crop region
+ * used in the output result metadata. Similarly, if the HAL implements video
+ * stabilization, it must adjust the result crop region to describe the region
+ * actually included in the output after video stabilization is applied. In
+ * general, a camera-using application must be able to determine the field of
+ * view it is receiving based on the crop region, the dimensions of the image
+ * sensor, and the lens focal length.
+ *
+ * It is assumed that the cropping is applied after raw to other color space
+ * conversion. Raw streams (RAW16 and RAW_OPAQUE) don't have this conversion stage,
+ * and are not croppable. Therefore, the crop region must be ignored by the HAL
+ * for raw streams.
+ *
+ * Since the crop region applies to all non-raw streams, which may have different aspect
+ * ratios than the crop region, the exact sensor region used for each stream may
+ * be smaller than the crop region. Specifically, each stream should maintain
+ * square pixels and its aspect ratio by minimally further cropping the defined
+ * crop region. If the stream's aspect ratio is wider than the crop region, the
+ * stream should be further cropped vertically, and if the stream's aspect ratio
+ * is narrower than the crop region, the stream should be further cropped
+ * horizontally.
+ *
+ * In all cases, the stream crop must be centered within the full crop region,
+ * and each stream is only either cropped horizontally or vertical relative to
+ * the full crop region, never both.
+ *
+ * For example, if two streams are defined, a 640x480 stream (4:3 aspect), and a
+ * 1280x720 stream (16:9 aspect), below demonstrates the expected output regions
+ * for each stream for a few sample crop regions, on a hypothetical 3 MP (2000 x
+ * 1500 pixel array) sensor.
+ *
+ * Crop region: (500, 375, 1000, 750) (4:3 aspect ratio)
+ *
+ * 640x480 stream crop: (500, 375, 1000, 750) (equal to crop region)
+ * 1280x720 stream crop: (500, 469, 1000, 562) (marked with =)
+ *
+ * 0 1000 2000
+ * +---------+---------+---------+----------+
+ * | Active pixel array |
+ * | |
+ * | |
+ * + +-------------------+ + 375
+ * | | | |
+ * | O===================O |
+ * | I 1280x720 stream I |
+ * + I I + 750
+ * | I I |
+ * | O===================O |
+ * | | | |
+ * + +-------------------+ + 1125
+ * | Crop region, 640x480 stream |
+ * | |
+ * | |
+ * +---------+---------+---------+----------+ 1500
+ *
+ * Crop region: (500, 375, 1333, 750) (16:9 aspect ratio)
+ *
+ * 640x480 stream crop: (666, 375, 1000, 750) (marked with =)
+ * 1280x720 stream crop: (500, 375, 1333, 750) (equal to crop region)
+ *
+ * 0 1000 2000
+ * +---------+---------+---------+----------+
+ * | Active pixel array |
+ * | |
+ * | |
+ * + +---O==================O---+ + 375
+ * | | I 640x480 stream I | |
+ * | | I I | |
+ * | | I I | |
+ * + | I I | + 750
+ * | | I I | |
+ * | | I I | |
+ * | | I I | |
+ * + +---O==================O---+ + 1125
+ * | Crop region, 1280x720 stream |
+ * | |
+ * | |
+ * +---------+---------+---------+----------+ 1500
+ *
+ * Crop region: (500, 375, 750, 750) (1:1 aspect ratio)
+ *
+ * 640x480 stream crop: (500, 469, 750, 562) (marked with =)
+ * 1280x720 stream crop: (500, 543, 750, 414) (marged with #)
+ *
+ * 0 1000 2000
+ * +---------+---------+---------+----------+
+ * | Active pixel array |
+ * | |
+ * | |
+ * + +--------------+ + 375
+ * | O==============O |
+ * | ################ |
+ * | # # |
+ * + # # + 750
+ * | # # |
+ * | ################ 1280x720 |
+ * | O==============O 640x480 |
+ * + +--------------+ + 1125
+ * | Crop region |
+ * | |
+ * | |
+ * +---------+---------+---------+----------+ 1500
+ *
+ * And a final example, a 1024x1024 square aspect ratio stream instead of the
+ * 480p stream:
+ *
+ * Crop region: (500, 375, 1000, 750) (4:3 aspect ratio)
+ *
+ * 1024x1024 stream crop: (625, 375, 750, 750) (marked with #)
+ * 1280x720 stream crop: (500, 469, 1000, 562) (marked with =)
+ *
+ * 0 1000 2000
+ * +---------+---------+---------+----------+
+ * | Active pixel array |
+ * | |
+ * | 1024x1024 stream |
+ * + +--###############--+ + 375
+ * | | # # | |
+ * | O===================O |
+ * | I 1280x720 stream I |
+ * + I I + 750
+ * | I I |
+ * | O===================O |
+ * | | # # | |
+ * + +--###############--+ + 1125
+ * | Crop region |
+ * | |
+ * | |
+ * +---------+---------+---------+----------+ 1500
+ *
+ */
+
+/**
+ * S6. Error management:
+ *
+ * Camera HAL device ops functions that have a return value will all return
+ * -ENODEV / NULL in case of a serious error. This means the device cannot
+ * continue operation, and must be closed by the framework. Once this error is
+ * returned by some method, or if notify() is called with ERROR_DEVICE, only
+ * the close() method can be called successfully. All other methods will return
+ * -ENODEV / NULL.
+ *
+ * If a device op is called in the wrong sequence, for example if the framework
+ * calls configure_streams() is called before initialize(), the device must
+ * return -ENOSYS from the call, and do nothing.
+ *
+ * Transient errors in image capture must be reported through notify() as follows:
+ *
+ * - The failure of an entire capture to occur must be reported by the HAL by
+ * calling notify() with ERROR_REQUEST. Individual errors for the result
+ * metadata or the output buffers must not be reported in this case.
+ *
+ * - If the metadata for a capture cannot be produced, but some image buffers
+ * were filled, the HAL must call notify() with ERROR_RESULT.
+ *
+ * - If an output image buffer could not be filled, but either the metadata was
+ * produced or some other buffers were filled, the HAL must call notify() with
+ * ERROR_BUFFER for each failed buffer.
+ *
+ * In each of these transient failure cases, the HAL must still call
+ * process_capture_result, with valid output and input (if an input buffer was
+ * submitted) buffer_handle_t. If the result metadata could not be produced, it
+ * should be NULL. If some buffers could not be filled, they must be returned with
+ * process_capture_result in the error state, their release fences must be set to
+ * the acquire fences passed by the framework, or -1 if they have been waited on by
+ * the HAL already.
+ *
+ * Invalid input arguments result in -EINVAL from the appropriate methods. In
+ * that case, the framework must act as if that call had never been made.
+ *
+ */
+
+/**
+ * S7. Key Performance Indicator (KPI) glossary:
+ *
+ * This includes some critical definitions that are used by KPI metrics.
+ *
+ * Pipeline Latency:
+ * For a given capture request, the duration from the framework calling
+ * process_capture_request to the HAL sending capture result and all buffers
+ * back by process_capture_result call. To make the Pipeline Latency measure
+ * independent of frame rate, it is measured by frame count.
+ *
+ * For example, when frame rate is 30 (fps), the frame duration (time interval
+ * between adjacent frame capture time) is 33 (ms).
+ * If it takes 5 frames for framework to get the result and buffers back for
+ * a given request, then the Pipeline Latency is 5 (frames), instead of
+ * 5 x 33 = 165 (ms).
+ *
+ * The Pipeline Latency is determined by android.request.pipelineDepth and
+ * android.request.pipelineMaxDepth, see their definitions for more details.
+ *
+ */
+
+/**
+ * S8. Sample Use Cases:
+ *
+ * This includes some typical use case examples the camera HAL may support.
+ *
+ * S8.1 Zero Shutter Lag (ZSL) with CAMERA3_STREAM_BIDIRECTIONAL stream.
+ *
+ * For this use case, the bidirectional stream will be used by the framework as follows:
+ *
+ * 1. The framework includes a buffer from this stream as output buffer in a
+ * request as normal.
+ *
+ * 2. Once the HAL device returns a filled output buffer to the framework,
+ * the framework may do one of two things with the filled buffer:
+ *
+ * 2. a. The framework uses the filled data, and returns the now-used buffer
+ * to the stream queue for reuse. This behavior exactly matches the
+ * OUTPUT type of stream.
+ *
+ * 2. b. The framework wants to reprocess the filled data, and uses the
+ * buffer as an input buffer for a request. Once the HAL device has
+ * used the reprocessing buffer, it then returns it to the
+ * framework. The framework then returns the now-used buffer to the
+ * stream queue for reuse.
+ *
+ * 3. The HAL device will be given the buffer again as an output buffer for
+ * a request at some future point.
+ *
+ * For ZSL use case, the pixel format for bidirectional stream will be
+ * HAL_PIXEL_FORMAT_RAW_OPAQUE or HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED if it
+ * is listed in android.scaler.availableInputOutputFormatsMap. When
+ * HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED is used, the gralloc
+ * usage flags for the consumer endpoint will be set to GRALLOC_USAGE_HW_CAMERA_ZSL.
+ * A configuration stream list that has BIDIRECTIONAL stream used as input, will
+ * usually also have a distinct OUTPUT stream to get the reprocessing data. For example,
+ * for the ZSL use case, the stream list might be configured with the following:
+ *
+ * - A HAL_PIXEL_FORMAT_RAW_OPAQUE bidirectional stream is used
+ * as input.
+ * - And a HAL_PIXEL_FORMAT_BLOB (JPEG) output stream.
+ *
+ * S8.2 ZSL (OPAQUE) reprocessing with CAMERA3_STREAM_INPUT stream.
+ *
+ * CAMERA_DEVICE_API_VERSION_3_3:
+ * When OPAQUE_REPROCESSING capability is supported by the camera device, the INPUT stream
+ * can be used for application/framework implemented use case like Zero Shutter Lag (ZSL).
+ * This kind of stream will be used by the framework as follows:
+ *
+ * 1. Application/framework configures an opaque (RAW or YUV based) format output stream that is
+ * used to produce the ZSL output buffers. The stream pixel format will be
+ * HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED.
+ *
+ * 2. Application/framework configures an opaque format input stream that is used to
+ * send the reprocessing ZSL buffers to the HAL. The stream pixel format will
+ * also be HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED.
+ *
+ * 3. Application/framework configures a YUV/JPEG output stream that is used to receive the
+ * reprocessed data. The stream pixel format will be YCbCr_420/HAL_PIXEL_FORMAT_BLOB.
+ *
+ * 4. Application/framework picks a ZSL buffer from the ZSL output stream when a ZSL capture is
+ * issued by the application, and sends the data back as an input buffer in a
+ * reprocessing request, then sends to the HAL for reprocessing.
+ *
+ * 5. The HAL sends back the output YUV/JPEG result to framework.
+ *
+ * The HAL can select the actual opaque buffer format and configure the ISP pipeline
+ * appropriately based on the HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED format and
+ * the gralloc usage flag GRALLOC_USAGE_HW_CAMERA_ZSL.
+
+ * S8.3 YUV reprocessing with CAMERA3_STREAM_INPUT stream.
+ *
+ * When YUV reprocessing is supported by the HAL, the INPUT stream
+ * can be used for the YUV reprocessing use cases like lucky-shot and image fusion.
+ * This kind of stream will be used by the framework as follows:
+ *
+ * 1. Application/framework configures an YCbCr_420 format output stream that is
+ * used to produce the output buffers.
+ *
+ * 2. Application/framework configures an YCbCr_420 format input stream that is used to
+ * send the reprocessing YUV buffers to the HAL.
+ *
+ * 3. Application/framework configures a YUV/JPEG output stream that is used to receive the
+ * reprocessed data. The stream pixel format will be YCbCr_420/HAL_PIXEL_FORMAT_BLOB.
+ *
+ * 4. Application/framework processes the output buffers (could be as simple as picking
+ * an output buffer directly) from the output stream when a capture is issued, and sends
+ * the data back as an input buffer in a reprocessing request, then sends to the HAL
+ * for reprocessing.
+ *
+ * 5. The HAL sends back the output YUV/JPEG result to framework.
+ *
+ */
+
+/**
+ * S9. Notes on Controls and Metadata
+ *
+ * This section contains notes about the interpretation and usage of various metadata tags.
+ *
+ * S9.1 HIGH_QUALITY and FAST modes.
+ *
+ * Many camera post-processing blocks may be listed as having HIGH_QUALITY,
+ * FAST, and OFF operating modes. These blocks will typically also have an
+ * 'available modes' tag representing which of these operating modes are
+ * available on a given device. The general policy regarding implementing
+ * these modes is as follows:
+ *
+ * 1. Operating mode controls of hardware blocks that cannot be disabled
+ * must not list OFF in their corresponding 'available modes' tags.
+ *
+ * 2. OFF will always be included in their corresponding 'available modes'
+ * tag if it is possible to disable that hardware block.
+ *
+ * 3. FAST must always be included in the 'available modes' tags for all
+ * post-processing blocks supported on the device. If a post-processing
+ * block also has a slower and higher quality operating mode that does
+ * not meet the framerate requirements for FAST mode, HIGH_QUALITY should
+ * be included in the 'available modes' tag to represent this operating
+ * mode.
+ */
+
+/**
+ * S10. Reprocessing flow and controls
+ *
+ * This section describes the OPAQUE and YUV reprocessing flow and controls. OPAQUE reprocessing
+ * uses an opaque format that is not directly application-visible, and the application can
+ * only select some of the output buffers and send back to HAL for reprocessing, while YUV
+ * reprocessing gives the application opportunity to process the buffers before reprocessing.
+ *
+ * S8 gives the stream configurations for the typical reprocessing uses cases,
+ * this section specifies the buffer flow and controls in more details.
+ *
+ * S10.1 OPAQUE (typically for ZSL use case) reprocessing flow and controls
+ *
+ * For OPAQUE reprocessing (e.g. ZSL) use case, after the application creates the specific
+ * output and input streams, runtime buffer flow and controls are specified as below:
+ *
+ * 1. Application starts output streaming by sending repeating requests for output
+ * opaque buffers and preview. The buffers are held by an application
+ * maintained circular buffer. The requests are based on CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG
+ * capture template, which should have all necessary settings that guarantee output
+ * frame rate is not slowed down relative to sensor output frame rate.
+ *
+ * 2. When a capture is issued, the application selects one output buffer based
+ * on application buffer selection logic, e.g. good AE and AF statistics etc.
+ * Application then creates an reprocess request based on the capture result associated
+ * with this selected buffer. The selected output buffer is now added to this reprocess
+ * request as an input buffer, the output buffer of this reprocess request should be
+ * either JPEG output buffer or YUV output buffer, or both, depending on the application
+ * choice.
+ *
+ * 3. Application then alters the reprocess settings to get best image quality. The HAL must
+ * support and only support below controls if the HAL support OPAQUE_REPROCESSING capability:
+ * - android.jpeg.* (if JPEG buffer is included as one of the output)
+ * - android.noiseReduction.mode (change to HIGH_QUALITY if it is supported)
+ * - android.edge.mode (change to HIGH_QUALITY if it is supported)
+ * All other controls must be ignored by the HAL.
+ * 4. HAL processed the input buffer and return the output buffers in the capture results
+ * as normal.
+ *
+ * S10.2 YUV reprocessing flow and controls
+ *
+ * The YUV reprocessing buffer flow is similar as OPAQUE reprocessing, with below difference:
+ *
+ * 1. Application may want to have finer granularity control of the intermediate YUV images
+ * (before reprocessing). For example, application may choose
+ * - android.noiseReduction.mode == MINIMAL
+ * to make sure the no YUV domain noise reduction has applied to the output YUV buffers,
+ * then it can do its own advanced noise reduction on them. For OPAQUE reprocessing case, this
+ * doesn't matter, as long as the final reprocessed image has the best quality.
+ * 2. Application may modify the YUV output buffer data. For example, for image fusion use
+ * case, where multiple output images are merged together to improve the signal-to-noise
+ * ratio (SNR). The input buffer may be generated from multiple buffers by the application.
+ * To avoid excessive amount of noise reduction and insufficient amount of edge enhancement
+ * being applied to the input buffer, the application can hint the HAL how much effective
+ * exposure time improvement has been done by the application, then the HAL can adjust the
+ * noise reduction and edge enhancement paramters to get best reprocessed image quality.
+ * Below tag can be used for this purpose:
+ * - android.reprocess.effectiveExposureFactor
+ * The value would be exposure time increase factor applied to the original output image,
+ * for example, if there are N image merged, the exposure time increase factor would be up
+ * to sqrt(N). See this tag spec for more details.
+ *
+ * S10.3 Reprocessing pipeline characteristics
+ *
+ * Reprocessing pipeline has below different characteristics comparing with normal output
+ * pipeline:
+ *
+ * 1. The reprocessing result can be returned ahead of the pending normal output results. But
+ * the FIFO ordering must be maintained for all reprocessing results. For example, there are
+ * below requests (A stands for output requests, B stands for reprocessing requests)
+ * being processed by the HAL:
+ * A1, A2, A3, A4, B1, A5, B2, A6...
+ * result of B1 can be returned before A1-A4, but result of B2 must be returned after B1.
+ * 2. Single input rule: For a given reprocessing request, all output buffers must be from the
+ * input buffer, rather than sensor output. For example, if a reprocess request include both
+ * JPEG and preview buffers, all output buffers must be produced from the input buffer
+ * included by the reprocessing request, rather than sensor. The HAL must not output preview
+ * buffers from sensor, while output JPEG buffer from the input buffer.
+ * 3. Input buffer will be from camera output directly (ZSL case) or indirectly(image fusion
+ * case). For the case where buffer is modified, the size will remain same. The HAL can
+ * notify CAMERA3_MSG_ERROR_REQUEST if buffer from unknown source is sent.
+ * 4. Result as reprocessing request: The HAL can expect that a reprocessing request is a copy
+ * of one of the output results with minor allowed setting changes. The HAL can notify
+ * CAMERA3_MSG_ERROR_REQUEST if a request from unknown source is issued.
+ * 5. Output buffers may not be used as inputs across the configure stream boundary, This is
+ * because an opaque stream like the ZSL output stream may have different actual image size
+ * inside of the ZSL buffer to save power and bandwidth for smaller resolution JPEG capture.
+ * The HAL may notify CAMERA3_MSG_ERROR_REQUEST if this case occurs.
+ * 6. HAL Reprocess requests error reporting during flush should follow the same rule specified
+ * by flush() method.
+ *
+ */
+
+__BEGIN_DECLS
+
+struct camera3_device;
+
+/**********************************************************************
+ *
+ * Camera3 stream and stream buffer definitions.
+ *
+ * These structs and enums define the handles and contents of the input and
+ * output streams connecting the HAL to various framework and application buffer
+ * consumers. Each stream is backed by a gralloc buffer queue.
+ *
+ */
+
+/**
+ * camera3_stream_type_t:
+ *
+ * The type of the camera stream, which defines whether the camera HAL device is
+ * the producer or the consumer for that stream, and how the buffers of the
+ * stream relate to the other streams.
+ */
+typedef enum camera3_stream_type {
+ /**
+ * This stream is an output stream; the camera HAL device will be
+ * responsible for filling buffers from this stream with newly captured or
+ * reprocessed image data.
+ */
+ CAMERA3_STREAM_OUTPUT = 0,
+
+ /**
+ * This stream is an input stream; the camera HAL device will be responsible
+ * for reading buffers from this stream and sending them through the camera
+ * processing pipeline, as if the buffer was a newly captured image from the
+ * imager.
+ *
+ * The pixel format for input stream can be any format reported by
+ * android.scaler.availableInputOutputFormatsMap. The pixel format of the
+ * output stream that is used to produce the reprocessing data may be any
+ * format reported by android.scaler.availableStreamConfigurations. The
+ * supported input/output stream combinations depends the camera device
+ * capabilities, see android.scaler.availableInputOutputFormatsMap for
+ * stream map details.
+ *
+ * This kind of stream is generally used to reprocess data into higher
+ * quality images (that otherwise would cause a frame rate performance
+ * loss), or to do off-line reprocessing.
+ *
+ * CAMERA_DEVICE_API_VERSION_3_3:
+ * The typical use cases are OPAQUE (typically ZSL) and YUV reprocessing,
+ * see S8.2, S8.3 and S10 for more details.
+ */
+ CAMERA3_STREAM_INPUT = 1,
+
+ /**
+ * This stream can be used for input and output. Typically, the stream is
+ * used as an output stream, but occasionally one already-filled buffer may
+ * be sent back to the HAL device for reprocessing.
+ *
+ * This kind of stream is meant generally for Zero Shutter Lag (ZSL)
+ * features, where copying the captured image from the output buffer to the
+ * reprocessing input buffer would be expensive. See S8.1 for more details.
+ *
+ * Note that the HAL will always be reprocessing data it produced.
+ *
+ */
+ CAMERA3_STREAM_BIDIRECTIONAL = 2,
+
+ /**
+ * Total number of framework-defined stream types
+ */
+ CAMERA3_NUM_STREAM_TYPES
+
+} camera3_stream_type_t;
+
+/**
+ * camera3_stream_rotation_t:
+ *
+ * The required counterclockwise rotation of camera stream.
+ */
+typedef enum camera3_stream_rotation {
+ /* No rotation */
+ CAMERA3_STREAM_ROTATION_0 = 0,
+
+ /* Rotate by 90 degree counterclockwise */
+ CAMERA3_STREAM_ROTATION_90 = 1,
+
+ /* Rotate by 180 degree counterclockwise */
+ CAMERA3_STREAM_ROTATION_180 = 2,
+
+ /* Rotate by 270 degree counterclockwise */
+ CAMERA3_STREAM_ROTATION_270 = 3
+} camera3_stream_rotation_t;
+
+/**
+ * camera3_stream_configuration_mode_t:
+ *
+ * This defines the general operation mode for the HAL (for a given stream configuration), where
+ * modes besides NORMAL have different semantics, and usually limit the generality of the API in
+ * exchange for higher performance in some particular area.
+ */
+typedef enum camera3_stream_configuration_mode {
+ /**
+ * Normal stream configuration operation mode. This is the default camera operation mode,
+ * where all semantics of HAL APIs and metadata controls apply.
+ */
+ CAMERA3_STREAM_CONFIGURATION_NORMAL_MODE = 0,
+
+ /**
+ * Special constrained high speed operation mode for devices that can not support high
+ * speed output in NORMAL mode. All streams in this configuration are operating at high speed
+ * mode and have different characteristics and limitations to achieve high speed output.
+ * The NORMAL mode can still be used for high speed output if the HAL can support high speed
+ * output while satisfying all the semantics of HAL APIs and metadata controls. It is
+ * recommended for the HAL to support high speed output in NORMAL mode (by advertising the high
+ * speed FPS ranges in android.control.aeAvailableTargetFpsRanges) if possible.
+ *
+ * This mode has below limitations/requirements:
+ *
+ * 1. The HAL must support up to 2 streams with sizes reported by
+ * android.control.availableHighSpeedVideoConfigurations.
+ * 2. In this mode, the HAL is expected to output up to 120fps or higher. This mode must
+ * support the targeted FPS range and size configurations reported by
+ * android.control.availableHighSpeedVideoConfigurations.
+ * 3. The HAL must support HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED output stream format.
+ * 4. To achieve efficient high speed streaming, the HAL may have to aggregate
+ * multiple frames together and send to camera device for processing where the request
+ * controls are same for all the frames in this batch (batch mode). The HAL must support
+ * max batch size and the max batch size requirements defined by
+ * android.control.availableHighSpeedVideoConfigurations.
+ * 5. In this mode, the HAL must override aeMode, awbMode, and afMode to ON, ON, and
+ * CONTINUOUS_VIDEO, respectively. All post-processing block mode controls must be
+ * overridden to be FAST. Therefore, no manual control of capture and post-processing
+ * parameters is possible. All other controls operate the same as when
+ * android.control.mode == AUTO. This means that all other android.control.* fields
+ * must continue to work, such as
+ *
+ * android.control.aeTargetFpsRange
+ * android.control.aeExposureCompensation
+ * android.control.aeLock
+ * android.control.awbLock
+ * android.control.effectMode
+ * android.control.aeRegions
+ * android.control.afRegions
+ * android.control.awbRegions
+ * android.control.afTrigger
+ * android.control.aePrecaptureTrigger
+ *
+ * Outside of android.control.*, the following controls must work:
+ *
+ * android.flash.mode (TORCH mode only, automatic flash for still capture will not work
+ * since aeMode is ON)
+ * android.lens.opticalStabilizationMode (if it is supported)
+ * android.scaler.cropRegion
+ * android.statistics.faceDetectMode (if it is supported)
+ *
+ * For more details about high speed stream requirements, see
+ * android.control.availableHighSpeedVideoConfigurations and CONSTRAINED_HIGH_SPEED_VIDEO
+ * capability defined in android.request.availableCapabilities.
+ *
+ * This mode only needs to be supported by HALs that include CONSTRAINED_HIGH_SPEED_VIDEO in
+ * the android.request.availableCapabilities static metadata.
+ */
+ CAMERA3_STREAM_CONFIGURATION_CONSTRAINED_HIGH_SPEED_MODE = 1,
+
+ /**
+ * First value for vendor-defined stream configuration modes.
+ */
+ CAMERA3_VENDOR_STREAM_CONFIGURATION_MODE_START = 0x8000
+} camera3_stream_configuration_mode_t;
+
+/**
+ * camera3_stream_t:
+ *
+ * A handle to a single camera input or output stream. A stream is defined by
+ * the framework by its buffer resolution and format, and additionally by the
+ * HAL with the gralloc usage flags and the maximum in-flight buffer count.
+ *
+ * The stream structures are owned by the framework, but pointers to a
+ * camera3_stream passed into the HAL by configure_streams() are valid until the
+ * end of the first subsequent configure_streams() call that _does not_ include
+ * that camera3_stream as an argument, or until the end of the close() call.
+ *
+ * All camera3_stream framework-controlled members are immutable once the
+ * camera3_stream is passed into configure_streams(). The HAL may only change
+ * the HAL-controlled parameters during a configure_streams() call, except for
+ * the contents of the private pointer.
+ *
+ * If a configure_streams() call returns a non-fatal error, all active streams
+ * remain valid as if configure_streams() had not been called.
+ *
+ * The endpoint of the stream is not visible to the camera HAL device.
+ * In DEVICE_API_VERSION_3_1, this was changed to share consumer usage flags
+ * on streams where the camera is a producer (OUTPUT and BIDIRECTIONAL stream
+ * types) see the usage field below.
+ */
+typedef struct camera3_stream {
+
+ /*****
+ * Set by framework before configure_streams()
+ */
+
+ /**
+ * The type of the stream, one of the camera3_stream_type_t values.
+ */
+ int stream_type;
+
+ /**
+ * The width in pixels of the buffers in this stream
+ */
+ uint32_t width;
+
+ /**
+ * The height in pixels of the buffers in this stream
+ */
+ uint32_t height;
+
+ /**
+ * The pixel format for the buffers in this stream. Format is a value from
+ * the HAL_PIXEL_FORMAT_* list in system/core/include/system/graphics.h, or
+ * from device-specific headers.
+ *
+ * If HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED is used, then the platform
+ * gralloc module will select a format based on the usage flags provided by
+ * the camera device and the other endpoint of the stream.
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * The camera HAL device must inspect the buffers handed to it in the
+ * subsequent register_stream_buffers() call to obtain the
+ * implementation-specific format details, if necessary.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * register_stream_buffers() won't be called by the framework, so the HAL
+ * should configure the ISP and sensor pipeline based purely on the sizes,
+ * usage flags, and formats for the configured streams.
+ */
+ int format;
+
+ /*****
+ * Set by HAL during configure_streams().
+ */
+
+ /**
+ * The gralloc usage flags for this stream, as needed by the HAL. The usage
+ * flags are defined in gralloc.h (GRALLOC_USAGE_*), or in device-specific
+ * headers.
+ *
+ * For output streams, these are the HAL's producer usage flags. For input
+ * streams, these are the HAL's consumer usage flags. The usage flags from
+ * the producer and the consumer will be combined together and then passed
+ * to the platform gralloc HAL module for allocating the gralloc buffers for
+ * each stream.
+ *
+ * Version information:
+ *
+ * == CAMERA_DEVICE_API_VERSION_3_0:
+ *
+ * No initial value guaranteed when passed via configure_streams().
+ * HAL may not use this field as input, and must write over this field
+ * with its usage flags.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * For stream_type OUTPUT and BIDIRECTIONAL, when passed via
+ * configure_streams(), the initial value of this is the consumer's
+ * usage flags. The HAL may use these consumer flags to decide stream
+ * configuration.
+ * For stream_type INPUT, when passed via configure_streams(), the initial
+ * value of this is 0.
+ * For all streams passed via configure_streams(), the HAL must write
+ * over this field with its usage flags.
+ */
+ uint32_t usage;
+
+ /**
+ * The maximum number of buffers the HAL device may need to have dequeued at
+ * the same time. The HAL device may not have more buffers in-flight from
+ * this stream than this value.
+ */
+ uint32_t max_buffers;
+
+ /**
+ * A handle to HAL-private information for the stream. Will not be inspected
+ * by the framework code.
+ */
+ void *priv;
+
+ /**
+ * A field that describes the contents of the buffer. The format and buffer
+ * dimensions define the memory layout and structure of the stream buffers,
+ * while dataSpace defines the meaning of the data within the buffer.
+ *
+ * For most formats, dataSpace defines the color space of the image data.
+ * In addition, for some formats, dataSpace indicates whether image- or
+ * depth-based data is requested. See system/core/include/system/graphics.h
+ * for details of formats and valid dataSpace values for each format.
+ *
+ * Version information:
+ *
+ * < CAMERA_DEVICE_API_VERSION_3_3:
+ *
+ * Not defined and should not be accessed. dataSpace should be assumed to
+ * be HAL_DATASPACE_UNKNOWN, and the appropriate color space, etc, should
+ * be determined from the usage flags and the format.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_3:
+ *
+ * Always set by the camera service. HAL must use this dataSpace to
+ * configure the stream to the correct colorspace, or to select between
+ * color and depth outputs if supported.
+ */
+ android_dataspace_t data_space;
+
+ /**
+ * The required output rotation of the stream, one of
+ * the camera3_stream_rotation_t values. This must be inspected by HAL along
+ * with stream width and height. For example, if the rotation is 90 degree
+ * and the stream width and height is 720 and 1280 respectively, camera service
+ * will supply buffers of size 720x1280, and HAL should capture a 1280x720 image
+ * and rotate the image by 90 degree counterclockwise. The rotation field is
+ * no-op when the stream type is input. Camera HAL must ignore the rotation
+ * field for an input stream.
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Not defined and must not be accessed. HAL must not apply any rotation
+ * on output images.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_3:
+ *
+ * Always set by camera service. HAL must inspect this field during stream
+ * configuration and returns -EINVAL if HAL cannot perform such rotation.
+ * HAL must always support CAMERA3_STREAM_ROTATION_0, so a
+ * configure_streams() call must not fail for unsupported rotation if
+ * rotation field of all streams is CAMERA3_STREAM_ROTATION_0.
+ *
+ */
+ int rotation;
+
+ /**
+ * This should be one of the camera3_stream_rotation_t values except for
+ * CAMERA3_STREAM_ROTATION_180.
+ * When setting to CAMERA3_STREAM_ROTATION_90 or CAMERA3_STREAM_ROTATION_270, HAL would crop,
+ * rotate the frame by the specified degrees clockwise and scale it up to original size.
+ * In Chrome OS, it's possible to have a portrait activity run in a landscape screen with
+ * landscape-mounted camera. The activity would show stretched or rotated preview because it
+ * does not expect to receive landscape preview frames. To solve this problem, we ask HAL to
+ * crop, rotate and scale the frames and modify CameraCharacteristics.SENSOR_ORIENTATION
+ * accordingly to imitate a portrait camera.
+ * Setting it to CAMERA3_STREAM_ROTATION_0 means no crop-rotate-scale would be performed.
+ * |cros_rotate_scale_degrees| in all camera3_stream_t of a configure_streams() call must be
+ * identical. The HAL should return -EINVAL if the degrees are not the same for all the streams.
+ */
+ int crop_rotate_scale_degrees;
+
+ /* reserved for future use */
+ void *reserved[6];
+
+} camera3_stream_t;
+
+/**
+ * camera3_stream_configuration_t:
+ *
+ * A structure of stream definitions, used by configure_streams(). This
+ * structure defines all the output streams and the reprocessing input
+ * stream for the current camera use case.
+ */
+typedef struct camera3_stream_configuration {
+ /**
+ * The total number of streams requested by the framework. This includes
+ * both input and output streams. The number of streams will be at least 1,
+ * and there will be at least one output-capable stream.
+ */
+ uint32_t num_streams;
+
+ /**
+ * An array of camera stream pointers, defining the input/output
+ * configuration for the camera HAL device.
+ *
+ * At most one input-capable stream may be defined (INPUT or BIDIRECTIONAL)
+ * in a single configuration.
+ *
+ * At least one output-capable stream must be defined (OUTPUT or
+ * BIDIRECTIONAL).
+ */
+ camera3_stream_t **streams;
+
+ /**
+ * >= CAMERA_DEVICE_API_VERSION_3_3:
+ *
+ * The operation mode of streams in this configuration, one of the value defined in
+ * camera3_stream_configuration_mode_t.
+ * The HAL can use this mode as an indicator to set the stream property (e.g.,
+ * camera3_stream->max_buffers) appropriately. For example, if the configuration is
+ * CAMERA3_STREAM_CONFIGURATION_CONSTRAINED_HIGH_SPEED_MODE, the HAL may want to set aside more
+ * buffers for batch mode operation (see android.control.availableHighSpeedVideoConfigurations
+ * for batch mode definition).
+ *
+ */
+ uint32_t operation_mode;
+} camera3_stream_configuration_t;
+
+/**
+ * camera3_buffer_status_t:
+ *
+ * The current status of a single stream buffer.
+ */
+typedef enum camera3_buffer_status {
+ /**
+ * The buffer is in a normal state, and can be used after waiting on its
+ * sync fence.
+ */
+ CAMERA3_BUFFER_STATUS_OK = 0,
+
+ /**
+ * The buffer does not contain valid data, and the data in it should not be
+ * used. The sync fence must still be waited on before reusing the buffer.
+ */
+ CAMERA3_BUFFER_STATUS_ERROR = 1
+
+} camera3_buffer_status_t;
+
+/**
+ * camera3_stream_buffer_t:
+ *
+ * A single buffer from a camera3 stream. It includes a handle to its parent
+ * stream, the handle to the gralloc buffer itself, and sync fences
+ *
+ * The buffer does not specify whether it is to be used for input or output;
+ * that is determined by its parent stream type and how the buffer is passed to
+ * the HAL device.
+ */
+typedef struct camera3_stream_buffer {
+ /**
+ * The handle of the stream this buffer is associated with
+ */
+ camera3_stream_t *stream;
+
+ /**
+ * The native handle to the buffer
+ */
+ buffer_handle_t *buffer;
+
+ /**
+ * Current state of the buffer, one of the camera3_buffer_status_t
+ * values. The framework will not pass buffers to the HAL that are in an
+ * error state. In case a buffer could not be filled by the HAL, it must
+ * have its status set to CAMERA3_BUFFER_STATUS_ERROR when returned to the
+ * framework with process_capture_result().
+ */
+ int status;
+
+ /**
+ * The acquire sync fence for this buffer. The HAL must wait on this fence
+ * fd before attempting to read from or write to this buffer.
+ *
+ * The framework may be set to -1 to indicate that no waiting is necessary
+ * for this buffer.
+ *
+ * When the HAL returns an output buffer to the framework with
+ * process_capture_result(), the acquire_fence must be set to -1. If the HAL
+ * never waits on the acquire_fence due to an error in filling a buffer,
+ * when calling process_capture_result() the HAL must set the release_fence
+ * of the buffer to be the acquire_fence passed to it by the framework. This
+ * will allow the framework to wait on the fence before reusing the buffer.
+ *
+ * For input buffers, the HAL must not change the acquire_fence field during
+ * the process_capture_request() call.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * When the HAL returns an input buffer to the framework with
+ * process_capture_result(), the acquire_fence must be set to -1. If the HAL
+ * never waits on input buffer acquire fence due to an error, the sync
+ * fences should be handled similarly to the way they are handled for output
+ * buffers.
+ */
+ int acquire_fence;
+
+ /**
+ * The release sync fence for this buffer. The HAL must set this fence when
+ * returning buffers to the framework, or write -1 to indicate that no
+ * waiting is required for this buffer.
+ *
+ * For the output buffers, the fences must be set in the output_buffers
+ * array passed to process_capture_result().
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * For the input buffer, the release fence must be set by the
+ * process_capture_request() call.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * For the input buffer, the fences must be set in the input_buffer
+ * passed to process_capture_result().
+ *
+ * After signaling the release_fence for this buffer, the HAL
+ * should not make any further attempts to access this buffer as the
+ * ownership has been fully transferred back to the framework.
+ *
+ * If a fence of -1 was specified then the ownership of this buffer
+ * is transferred back immediately upon the call of process_capture_result.
+ */
+ int release_fence;
+
+} camera3_stream_buffer_t;
+
+/**
+ * camera3_stream_buffer_set_t:
+ *
+ * The complete set of gralloc buffers for a stream. This structure is given to
+ * register_stream_buffers() to allow the camera HAL device to register/map/etc
+ * newly allocated stream buffers.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Deprecated (and not used). In particular,
+ * register_stream_buffers is also deprecated and will never be invoked.
+ *
+ */
+typedef struct camera3_stream_buffer_set {
+ /**
+ * The stream handle for the stream these buffers belong to
+ */
+ camera3_stream_t *stream;
+
+ /**
+ * The number of buffers in this stream. It is guaranteed to be at least
+ * stream->max_buffers.
+ */
+ uint32_t num_buffers;
+
+ /**
+ * The array of gralloc buffer handles for this stream. If the stream format
+ * is set to HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED, the camera HAL device
+ * should inspect the passed-in buffers to determine any platform-private
+ * pixel format information.
+ */
+ buffer_handle_t **buffers;
+
+} camera3_stream_buffer_set_t;
+
+/**
+ * camera3_jpeg_blob:
+ *
+ * Transport header for compressed JPEG buffers in output streams.
+ *
+ * To capture JPEG images, a stream is created using the pixel format
+ * HAL_PIXEL_FORMAT_BLOB. The buffer size for the stream is calculated by the
+ * framework, based on the static metadata field android.jpeg.maxSize. Since
+ * compressed JPEG images are of variable size, the HAL needs to include the
+ * final size of the compressed image using this structure inside the output
+ * stream buffer. The JPEG blob ID field must be set to CAMERA3_JPEG_BLOB_ID.
+ *
+ * Transport header should be at the end of the JPEG output stream buffer. That
+ * means the jpeg_blob_id must start at byte[buffer_size -
+ * sizeof(camera3_jpeg_blob)], where the buffer_size is the size of gralloc buffer.
+ * Any HAL using this transport header must account for it in android.jpeg.maxSize
+ * The JPEG data itself starts at the beginning of the buffer and should be
+ * jpeg_size bytes long.
+ */
+typedef struct camera3_jpeg_blob {
+ uint16_t jpeg_blob_id;
+ uint32_t jpeg_size;
+} camera3_jpeg_blob_t;
+
+enum {
+ CAMERA3_JPEG_BLOB_ID = 0x00FF
+};
+
+/**********************************************************************
+ *
+ * Message definitions for the HAL notify() callback.
+ *
+ * These definitions are used for the HAL notify callback, to signal
+ * asynchronous events from the HAL device to the Android framework.
+ *
+ */
+
+/**
+ * camera3_msg_type:
+ *
+ * Indicates the type of message sent, which specifies which member of the
+ * message union is valid.
+ *
+ */
+typedef enum camera3_msg_type {
+ /**
+ * An error has occurred. camera3_notify_msg.message.error contains the
+ * error information.
+ */
+ CAMERA3_MSG_ERROR = 1,
+
+ /**
+ * The exposure of a given request or processing a reprocess request has
+ * begun. camera3_notify_msg.message.shutter contains the information
+ * the capture.
+ */
+ CAMERA3_MSG_SHUTTER = 2,
+
+ /**
+ * Number of framework message types
+ */
+ CAMERA3_NUM_MESSAGES
+
+} camera3_msg_type_t;
+
+/**
+ * Defined error codes for CAMERA_MSG_ERROR
+ */
+typedef enum camera3_error_msg_code {
+ /**
+ * A serious failure occured. No further frames or buffer streams will
+ * be produced by the device. Device should be treated as closed. The
+ * client must reopen the device to use it again. The frame_number field
+ * is unused.
+ */
+ CAMERA3_MSG_ERROR_DEVICE = 1,
+
+ /**
+ * An error has occurred in processing a request. No output (metadata or
+ * buffers) will be produced for this request. The frame_number field
+ * specifies which request has been dropped. Subsequent requests are
+ * unaffected, and the device remains operational.
+ */
+ CAMERA3_MSG_ERROR_REQUEST = 2,
+
+ /**
+ * An error has occurred in producing an output result metadata buffer
+ * for a request, but output stream buffers for it will still be
+ * available. Subsequent requests are unaffected, and the device remains
+ * operational. The frame_number field specifies the request for which
+ * result metadata won't be available.
+ */
+ CAMERA3_MSG_ERROR_RESULT = 3,
+
+ /**
+ * An error has occurred in placing an output buffer into a stream for a
+ * request. The frame metadata and other buffers may still be
+ * available. Subsequent requests are unaffected, and the device remains
+ * operational. The frame_number field specifies the request for which the
+ * buffer was dropped, and error_stream contains a pointer to the stream
+ * that dropped the frame.u
+ */
+ CAMERA3_MSG_ERROR_BUFFER = 4,
+
+ /**
+ * Number of error types
+ */
+ CAMERA3_MSG_NUM_ERRORS
+
+} camera3_error_msg_code_t;
+
+/**
+ * camera3_error_msg_t:
+ *
+ * Message contents for CAMERA3_MSG_ERROR
+ */
+typedef struct camera3_error_msg {
+ /**
+ * Frame number of the request the error applies to. 0 if the frame number
+ * isn't applicable to the error.
+ */
+ uint32_t frame_number;
+
+ /**
+ * Pointer to the stream that had a failure. NULL if the stream isn't
+ * applicable to the error.
+ */
+ camera3_stream_t *error_stream;
+
+ /**
+ * The code for this error; one of the CAMERA_MSG_ERROR enum values.
+ */
+ int error_code;
+
+} camera3_error_msg_t;
+
+/**
+ * camera3_shutter_msg_t:
+ *
+ * Message contents for CAMERA3_MSG_SHUTTER
+ */
+typedef struct camera3_shutter_msg {
+ /**
+ * Frame number of the request that has begun exposure or reprocessing.
+ */
+ uint32_t frame_number;
+
+ /**
+ * Timestamp for the start of capture. For a reprocess request, this must
+ * be input image's start of capture. This must match the capture result
+ * metadata's sensor exposure start timestamp.
+ */
+ uint64_t timestamp;
+
+} camera3_shutter_msg_t;
+
+/**
+ * camera3_notify_msg_t:
+ *
+ * The message structure sent to camera3_callback_ops_t.notify()
+ */
+typedef struct camera3_notify_msg {
+
+ /**
+ * The message type. One of camera3_notify_msg_type, or a private extension.
+ */
+ int type;
+
+ union {
+ /**
+ * Error message contents. Valid if type is CAMERA3_MSG_ERROR
+ */
+ camera3_error_msg_t error;
+
+ /**
+ * Shutter message contents. Valid if type is CAMERA3_MSG_SHUTTER
+ */
+ camera3_shutter_msg_t shutter;
+
+ /**
+ * Generic message contents. Used to ensure a minimum size for custom
+ * message types.
+ */
+ uint8_t generic[32];
+ } message;
+
+} camera3_notify_msg_t;
+
+/**********************************************************************
+ *
+ * Capture request/result definitions for the HAL process_capture_request()
+ * method, and the process_capture_result() callback.
+ *
+ */
+
+/**
+ * camera3_request_template_t:
+ *
+ * Available template types for
+ * camera3_device_ops.construct_default_request_settings()
+ */
+typedef enum camera3_request_template {
+ /**
+ * Standard camera preview operation with 3A on auto.
+ */
+ CAMERA3_TEMPLATE_PREVIEW = 1,
+
+ /**
+ * Standard camera high-quality still capture with 3A and flash on auto.
+ */
+ CAMERA3_TEMPLATE_STILL_CAPTURE = 2,
+
+ /**
+ * Standard video recording plus preview with 3A on auto, torch off.
+ */
+ CAMERA3_TEMPLATE_VIDEO_RECORD = 3,
+
+ /**
+ * High-quality still capture while recording video. Application will
+ * include preview, video record, and full-resolution YUV or JPEG streams in
+ * request. Must not cause stuttering on video stream. 3A on auto.
+ */
+ CAMERA3_TEMPLATE_VIDEO_SNAPSHOT = 4,
+
+ /**
+ * Zero-shutter-lag mode. Application will request preview and
+ * full-resolution data for each frame, and reprocess it to JPEG when a
+ * still image is requested by user. Settings should provide highest-quality
+ * full-resolution images without compromising preview frame rate. 3A on
+ * auto.
+ */
+ CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG = 5,
+
+ /**
+ * A basic template for direct application control of capture
+ * parameters. All automatic control is disabled (auto-exposure, auto-white
+ * balance, auto-focus), and post-processing parameters are set to preview
+ * quality. The manual capture parameters (exposure, sensitivity, etc.)
+ * are set to reasonable defaults, but should be overridden by the
+ * application depending on the intended use case.
+ */
+ CAMERA3_TEMPLATE_MANUAL = 6,
+
+ /* Total number of templates */
+ CAMERA3_TEMPLATE_COUNT,
+
+ /**
+ * First value for vendor-defined request templates
+ */
+ CAMERA3_VENDOR_TEMPLATE_START = 0x40000000
+
+} camera3_request_template_t;
+
+/**
+ * camera3_capture_request_t:
+ *
+ * A single request for image capture/buffer reprocessing, sent to the Camera
+ * HAL device by the framework in process_capture_request().
+ *
+ * The request contains the settings to be used for this capture, and the set of
+ * output buffers to write the resulting image data in. It may optionally
+ * contain an input buffer, in which case the request is for reprocessing that
+ * input buffer instead of capturing a new image with the camera sensor. The
+ * capture is identified by the frame_number.
+ *
+ * In response, the camera HAL device must send a camera3_capture_result
+ * structure asynchronously to the framework, using the process_capture_result()
+ * callback.
+ */
+typedef struct camera3_capture_request {
+ /**
+ * The frame number is an incrementing integer set by the framework to
+ * uniquely identify this capture. It needs to be returned in the result
+ * call, and is also used to identify the request in asynchronous
+ * notifications sent to camera3_callback_ops_t.notify().
+ */
+ uint32_t frame_number;
+
+ /**
+ * The settings buffer contains the capture and processing parameters for
+ * the request. As a special case, a NULL settings buffer indicates that the
+ * settings are identical to the most-recently submitted capture request. A
+ * NULL buffer cannot be used as the first submitted request after a
+ * configure_streams() call.
+ */
+ const camera_metadata_t *settings;
+
+ /**
+ * The input stream buffer to use for this request, if any.
+ *
+ * If input_buffer is NULL, then the request is for a new capture from the
+ * imager. If input_buffer is valid, the request is for reprocessing the
+ * image contained in input_buffer.
+ *
+ * In the latter case, the HAL must set the release_fence of the
+ * input_buffer to a valid sync fence, or to -1 if the HAL does not support
+ * sync, before process_capture_request() returns.
+ *
+ * The HAL is required to wait on the acquire sync fence of the input buffer
+ * before accessing it.
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * Any input buffer included here will have been registered with the HAL
+ * through register_stream_buffers() before its inclusion in a request.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * The buffers will not have been pre-registered with the HAL.
+ * Subsequent requests may reuse buffers, or provide entirely new buffers.
+ */
+ camera3_stream_buffer_t *input_buffer;
+
+ /**
+ * The number of output buffers for this capture request. Must be at least
+ * 1.
+ */
+ uint32_t num_output_buffers;
+
+ /**
+ * An array of num_output_buffers stream buffers, to be filled with image
+ * data from this capture/reprocess. The HAL must wait on the acquire fences
+ * of each stream buffer before writing to them.
+ *
+ * The HAL takes ownership of the actual buffer_handle_t entries in
+ * output_buffers; the framework does not access them until they are
+ * returned in a camera3_capture_result_t.
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * All the buffers included here will have been registered with the HAL
+ * through register_stream_buffers() before their inclusion in a request.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Any or all of the buffers included here may be brand new in this
+ * request (having never before seen by the HAL).
+ */
+ const camera3_stream_buffer_t *output_buffers;
+
+} camera3_capture_request_t;
+
+/**
+ * camera3_capture_result_t:
+ *
+ * The result of a single capture/reprocess by the camera HAL device. This is
+ * sent to the framework asynchronously with process_capture_result(), in
+ * response to a single capture request sent to the HAL with
+ * process_capture_request(). Multiple process_capture_result() calls may be
+ * performed by the HAL for each request.
+ *
+ * Each call, all with the same frame
+ * number, may contain some subset of the output buffers, and/or the result
+ * metadata. The metadata may only be provided once for a given frame number;
+ * all other calls must set the result metadata to NULL.
+ *
+ * The result structure contains the output metadata from this capture, and the
+ * set of output buffers that have been/will be filled for this capture. Each
+ * output buffer may come with a release sync fence that the framework will wait
+ * on before reading, in case the buffer has not yet been filled by the HAL.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * The metadata may be provided multiple times for a single frame number. The
+ * framework will accumulate together the final result set by combining each
+ * partial result together into the total result set.
+ *
+ * If an input buffer is given in a request, the HAL must return it in one of
+ * the process_capture_result calls, and the call may be to just return the input
+ * buffer, without metadata and output buffers; the sync fences must be handled
+ * the same way they are done for output buffers.
+ *
+ *
+ * Performance considerations:
+ *
+ * Applications will also receive these partial results immediately, so sending
+ * partial results is a highly recommended performance optimization to avoid
+ * the total pipeline latency before sending the results for what is known very
+ * early on in the pipeline.
+ *
+ * A typical use case might be calculating the AF state halfway through the
+ * pipeline; by sending the state back to the framework immediately, we get a
+ * 50% performance increase and perceived responsiveness of the auto-focus.
+ *
+ */
+typedef struct camera3_capture_result {
+ /**
+ * The frame number is an incrementing integer set by the framework in the
+ * submitted request to uniquely identify this capture. It is also used to
+ * identify the request in asynchronous notifications sent to
+ * camera3_callback_ops_t.notify().
+ */
+ uint32_t frame_number;
+
+ /**
+ * The result metadata for this capture. This contains information about the
+ * final capture parameters, the state of the capture and post-processing
+ * hardware, the state of the 3A algorithms, if enabled, and the output of
+ * any enabled statistics units.
+ *
+ * Only one call to process_capture_result() with a given frame_number may
+ * include the result metadata. All other calls for the same frame_number
+ * must set this to NULL.
+ *
+ * If there was an error producing the result metadata, result must be an
+ * empty metadata buffer, and notify() must be called with ERROR_RESULT.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Multiple calls to process_capture_result() with a given frame_number
+ * may include the result metadata.
+ *
+ * Partial metadata submitted should not include any metadata key returned
+ * in a previous partial result for a given frame. Each new partial result
+ * for that frame must also set a distinct partial_result value.
+ *
+ * If notify has been called with ERROR_RESULT, all further partial
+ * results for that frame are ignored by the framework.
+ */
+ const camera_metadata_t *result;
+
+ /**
+ * The number of output buffers returned in this result structure. Must be
+ * less than or equal to the matching capture request's count. If this is
+ * less than the buffer count in the capture request, at least one more call
+ * to process_capture_result with the same frame_number must be made, to
+ * return the remaining output buffers to the framework. This may only be
+ * zero if the structure includes valid result metadata or an input buffer
+ * is returned in this result.
+ */
+ uint32_t num_output_buffers;
+
+ /**
+ * The handles for the output stream buffers for this capture. They may not
+ * yet be filled at the time the HAL calls process_capture_result(); the
+ * framework will wait on the release sync fences provided by the HAL before
+ * reading the buffers.
+ *
+ * The HAL must set the stream buffer's release sync fence to a valid sync
+ * fd, or to -1 if the buffer has already been filled.
+ *
+ * If the HAL encounters an error while processing the buffer, and the
+ * buffer is not filled, the buffer's status field must be set to
+ * CAMERA3_BUFFER_STATUS_ERROR. If the HAL did not wait on the acquire fence
+ * before encountering the error, the acquire fence should be copied into
+ * the release fence, to allow the framework to wait on the fence before
+ * reusing the buffer.
+ *
+ * The acquire fence must be set to -1 for all output buffers. If
+ * num_output_buffers is zero, this may be NULL. In that case, at least one
+ * more process_capture_result call must be made by the HAL to provide the
+ * output buffers.
+ *
+ * When process_capture_result is called with a new buffer for a frame,
+ * all previous frames' buffers for that corresponding stream must have been
+ * already delivered (the fences need not have yet been signaled).
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Gralloc buffers for a frame may be sent to framework before the
+ * corresponding SHUTTER-notify.
+ *
+ * Performance considerations:
+ *
+ * Buffers delivered to the framework will not be dispatched to the
+ * application layer until a start of exposure timestamp has been received
+ * via a SHUTTER notify() call. It is highly recommended to
+ * dispatch that call as early as possible.
+ */
+ const camera3_stream_buffer_t *output_buffers;
+
+ /**
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * The handle for the input stream buffer for this capture. It may not
+ * yet be consumed at the time the HAL calls process_capture_result(); the
+ * framework will wait on the release sync fences provided by the HAL before
+ * reusing the buffer.
+ *
+ * The HAL should handle the sync fences the same way they are done for
+ * output_buffers.
+ *
+ * Only one input buffer is allowed to be sent per request. Similarly to
+ * output buffers, the ordering of returned input buffers must be
+ * maintained by the HAL.
+ *
+ * Performance considerations:
+ *
+ * The input buffer should be returned as early as possible. If the HAL
+ * supports sync fences, it can call process_capture_result to hand it back
+ * with sync fences being set appropriately. If the sync fences are not
+ * supported, the buffer can only be returned when it is consumed, which
+ * may take long time; the HAL may choose to copy this input buffer to make
+ * the buffer return sooner.
+ */
+ const camera3_stream_buffer_t *input_buffer;
+
+ /**
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * In order to take advantage of partial results, the HAL must set the
+ * static metadata android.request.partialResultCount to the number of
+ * partial results it will send for each frame.
+ *
+ * Each new capture result with a partial result must set
+ * this field (partial_result) to a distinct inclusive value between
+ * 1 and android.request.partialResultCount.
+ *
+ * HALs not wishing to take advantage of this feature must not
+ * set an android.request.partialResultCount or partial_result to a value
+ * other than 1.
+ *
+ * This value must be set to 0 when a capture result contains buffers only
+ * and no metadata.
+ */
+ uint32_t partial_result;
+
+} camera3_capture_result_t;
+
+/**********************************************************************
+ *
+ * Callback methods for the HAL to call into the framework.
+ *
+ * These methods are used to return metadata and image buffers for a completed
+ * or failed captures, and to notify the framework of asynchronous events such
+ * as errors.
+ *
+ * The framework will not call back into the HAL from within these callbacks,
+ * and these calls will not block for extended periods.
+ *
+ */
+typedef struct camera3_callback_ops {
+
+ /**
+ * process_capture_result:
+ *
+ * Send results from a completed capture to the framework.
+ * process_capture_result() may be invoked multiple times by the HAL in
+ * response to a single capture request. This allows, for example, the
+ * metadata and low-resolution buffers to be returned in one call, and
+ * post-processed JPEG buffers in a later call, once it is available. Each
+ * call must include the frame number of the request it is returning
+ * metadata or buffers for.
+ *
+ * A component (buffer or metadata) of the complete result may only be
+ * included in one process_capture_result call. A buffer for each stream,
+ * and the result metadata, must be returned by the HAL for each request in
+ * one of the process_capture_result calls, even in case of errors producing
+ * some of the output. A call to process_capture_result() with neither
+ * output buffers or result metadata is not allowed.
+ *
+ * The order of returning metadata and buffers for a single result does not
+ * matter, but buffers for a given stream must be returned in FIFO order. So
+ * the buffer for request 5 for stream A must always be returned before the
+ * buffer for request 6 for stream A. This also applies to the result
+ * metadata; the metadata for request 5 must be returned before the metadata
+ * for request 6.
+ *
+ * However, different streams are independent of each other, so it is
+ * acceptable and expected that the buffer for request 5 for stream A may be
+ * returned after the buffer for request 6 for stream B is. And it is
+ * acceptable that the result metadata for request 6 for stream B is
+ * returned before the buffer for request 5 for stream A is.
+ *
+ * The HAL retains ownership of result structure, which only needs to be
+ * valid to access during this call. The framework will copy whatever it
+ * needs before this call returns.
+ *
+ * The output buffers do not need to be filled yet; the framework will wait
+ * on the stream buffer release sync fence before reading the buffer
+ * data. Therefore, this method should be called by the HAL as soon as
+ * possible, even if some or all of the output buffers are still in
+ * being filled. The HAL must include valid release sync fences into each
+ * output_buffers stream buffer entry, or -1 if that stream buffer is
+ * already filled.
+ *
+ * If the result buffer cannot be constructed for a request, the HAL should
+ * return an empty metadata buffer, but still provide the output buffers and
+ * their sync fences. In addition, notify() must be called with an
+ * ERROR_RESULT message.
+ *
+ * If an output buffer cannot be filled, its status field must be set to
+ * STATUS_ERROR. In addition, notify() must be called with a ERROR_BUFFER
+ * message.
+ *
+ * If the entire capture has failed, then this method still needs to be
+ * called to return the output buffers to the framework. All the buffer
+ * statuses should be STATUS_ERROR, and the result metadata should be an
+ * empty buffer. In addition, notify() must be called with a ERROR_REQUEST
+ * message. In this case, individual ERROR_RESULT/ERROR_BUFFER messages
+ * should not be sent.
+ *
+ * Performance requirements:
+ *
+ * This is a non-blocking call. The framework will return this call in 5ms.
+ *
+ * The pipeline latency (see S7 for definition) should be less than or equal to
+ * 4 frame intervals, and must be less than or equal to 8 frame intervals.
+ *
+ */
+ void (*process_capture_result)(const struct camera3_callback_ops *,
+ const camera3_capture_result_t *result);
+
+ /**
+ * notify:
+ *
+ * Asynchronous notification callback from the HAL, fired for various
+ * reasons. Only for information independent of frame capture, or that
+ * require specific timing. The ownership of the message structure remains
+ * with the HAL, and the msg only needs to be valid for the duration of this
+ * call.
+ *
+ * Multiple threads may call notify() simultaneously.
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * The notification for the start of exposure for a given request must be
+ * sent by the HAL before the first call to process_capture_result() for
+ * that request is made.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Buffers delivered to the framework will not be dispatched to the
+ * application layer until a start of exposure timestamp (or input image's
+ * start of exposure timestamp for a reprocess request) has been received
+ * via a SHUTTER notify() call. It is highly recommended to dispatch this
+ * call as early as possible.
+ *
+ * ------------------------------------------------------------------------
+ * Performance requirements:
+ *
+ * This is a non-blocking call. The framework will return this call in 5ms.
+ */
+ void (*notify)(const struct camera3_callback_ops *,
+ const camera3_notify_msg_t *msg);
+
+} camera3_callback_ops_t;
+
+/**********************************************************************
+ *
+ * Camera device operations
+ *
+ */
+typedef struct camera3_device_ops {
+
+ /**
+ * initialize:
+ *
+ * One-time initialization to pass framework callback function pointers to
+ * the HAL. Will be called once after a successful open() call, before any
+ * other functions are called on the camera3_device_ops structure.
+ *
+ * Performance requirements:
+ *
+ * This should be a non-blocking call. The HAL should return from this call
+ * in 5ms, and must return from this call in 10ms.
+ *
+ * Return values:
+ *
+ * 0: On successful initialization
+ *
+ * -ENODEV: If initialization fails. Only close() can be called successfully
+ * by the framework after this.
+ */
+ int (*initialize)(const struct camera3_device *,
+ const camera3_callback_ops_t *callback_ops);
+
+ /**********************************************************************
+ * Stream management
+ */
+
+ /**
+ * configure_streams:
+ *
+ * CAMERA_DEVICE_API_VERSION_3_0 only:
+ *
+ * Reset the HAL camera device processing pipeline and set up new input and
+ * output streams. This call replaces any existing stream configuration with
+ * the streams defined in the stream_list. This method will be called at
+ * least once after initialize() before a request is submitted with
+ * process_capture_request().
+ *
+ * The stream_list must contain at least one output-capable stream, and may
+ * not contain more than one input-capable stream.
+ *
+ * The stream_list may contain streams that are also in the currently-active
+ * set of streams (from the previous call to configure_stream()). These
+ * streams will already have valid values for usage, max_buffers, and the
+ * private pointer.
+ *
+ * If such a stream has already had its buffers registered,
+ * register_stream_buffers() will not be called again for the stream, and
+ * buffers from the stream can be immediately included in input requests.
+ *
+ * If the HAL needs to change the stream configuration for an existing
+ * stream due to the new configuration, it may rewrite the values of usage
+ * and/or max_buffers during the configure call.
+ *
+ * The framework will detect such a change, and will then reallocate the
+ * stream buffers, and call register_stream_buffers() again before using
+ * buffers from that stream in a request.
+ *
+ * If a currently-active stream is not included in stream_list, the HAL may
+ * safely remove any references to that stream. It will not be reused in a
+ * later configure() call by the framework, and all the gralloc buffers for
+ * it will be freed after the configure_streams() call returns.
+ *
+ * The stream_list structure is owned by the framework, and may not be
+ * accessed once this call completes. The address of an individual
+ * camera3_stream_t structure will remain valid for access by the HAL until
+ * the end of the first configure_stream() call which no longer includes
+ * that camera3_stream_t in the stream_list argument. The HAL may not change
+ * values in the stream structure outside of the private pointer, except for
+ * the usage and max_buffers members during the configure_streams() call
+ * itself.
+ *
+ * If the stream is new, the usage, max_buffer, and private pointer fields
+ * of the stream structure will all be set to 0. The HAL device must set
+ * these fields before the configure_streams() call returns. These fields
+ * are then used by the framework and the platform gralloc module to
+ * allocate the gralloc buffers for each stream.
+ *
+ * Before such a new stream can have its buffers included in a capture
+ * request, the framework will call register_stream_buffers() with that
+ * stream. However, the framework is not required to register buffers for
+ * _all_ streams before submitting a request. This allows for quick startup
+ * of (for example) a preview stream, with allocation for other streams
+ * happening later or concurrently.
+ *
+ * ------------------------------------------------------------------------
+ * CAMERA_DEVICE_API_VERSION_3_1 only:
+ *
+ * Reset the HAL camera device processing pipeline and set up new input and
+ * output streams. This call replaces any existing stream configuration with
+ * the streams defined in the stream_list. This method will be called at
+ * least once after initialize() before a request is submitted with
+ * process_capture_request().
+ *
+ * The stream_list must contain at least one output-capable stream, and may
+ * not contain more than one input-capable stream.
+ *
+ * The stream_list may contain streams that are also in the currently-active
+ * set of streams (from the previous call to configure_stream()). These
+ * streams will already have valid values for usage, max_buffers, and the
+ * private pointer.
+ *
+ * If such a stream has already had its buffers registered,
+ * register_stream_buffers() will not be called again for the stream, and
+ * buffers from the stream can be immediately included in input requests.
+ *
+ * If the HAL needs to change the stream configuration for an existing
+ * stream due to the new configuration, it may rewrite the values of usage
+ * and/or max_buffers during the configure call.
+ *
+ * The framework will detect such a change, and will then reallocate the
+ * stream buffers, and call register_stream_buffers() again before using
+ * buffers from that stream in a request.
+ *
+ * If a currently-active stream is not included in stream_list, the HAL may
+ * safely remove any references to that stream. It will not be reused in a
+ * later configure() call by the framework, and all the gralloc buffers for
+ * it will be freed after the configure_streams() call returns.
+ *
+ * The stream_list structure is owned by the framework, and may not be
+ * accessed once this call completes. The address of an individual
+ * camera3_stream_t structure will remain valid for access by the HAL until
+ * the end of the first configure_stream() call which no longer includes
+ * that camera3_stream_t in the stream_list argument. The HAL may not change
+ * values in the stream structure outside of the private pointer, except for
+ * the usage and max_buffers members during the configure_streams() call
+ * itself.
+ *
+ * If the stream is new, max_buffer, and private pointer fields of the
+ * stream structure will all be set to 0. The usage will be set to the
+ * consumer usage flags. The HAL device must set these fields before the
+ * configure_streams() call returns. These fields are then used by the
+ * framework and the platform gralloc module to allocate the gralloc
+ * buffers for each stream.
+ *
+ * Before such a new stream can have its buffers included in a capture
+ * request, the framework will call register_stream_buffers() with that
+ * stream. However, the framework is not required to register buffers for
+ * _all_ streams before submitting a request. This allows for quick startup
+ * of (for example) a preview stream, with allocation for other streams
+ * happening later or concurrently.
+ *
+ * ------------------------------------------------------------------------
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Reset the HAL camera device processing pipeline and set up new input and
+ * output streams. This call replaces any existing stream configuration with
+ * the streams defined in the stream_list. This method will be called at
+ * least once after initialize() before a request is submitted with
+ * process_capture_request().
+ *
+ * The stream_list must contain at least one output-capable stream, and may
+ * not contain more than one input-capable stream.
+ *
+ * The stream_list may contain streams that are also in the currently-active
+ * set of streams (from the previous call to configure_stream()). These
+ * streams will already have valid values for usage, max_buffers, and the
+ * private pointer.
+ *
+ * If the HAL needs to change the stream configuration for an existing
+ * stream due to the new configuration, it may rewrite the values of usage
+ * and/or max_buffers during the configure call.
+ *
+ * The framework will detect such a change, and may then reallocate the
+ * stream buffers before using buffers from that stream in a request.
+ *
+ * If a currently-active stream is not included in stream_list, the HAL may
+ * safely remove any references to that stream. It will not be reused in a
+ * later configure() call by the framework, and all the gralloc buffers for
+ * it will be freed after the configure_streams() call returns.
+ *
+ * The stream_list structure is owned by the framework, and may not be
+ * accessed once this call completes. The address of an individual
+ * camera3_stream_t structure will remain valid for access by the HAL until
+ * the end of the first configure_stream() call which no longer includes
+ * that camera3_stream_t in the stream_list argument. The HAL may not change
+ * values in the stream structure outside of the private pointer, except for
+ * the usage and max_buffers members during the configure_streams() call
+ * itself.
+ *
+ * If the stream is new, max_buffer, and private pointer fields of the
+ * stream structure will all be set to 0. The usage will be set to the
+ * consumer usage flags. The HAL device must set these fields before the
+ * configure_streams() call returns. These fields are then used by the
+ * framework and the platform gralloc module to allocate the gralloc
+ * buffers for each stream.
+ *
+ * Newly allocated buffers may be included in a capture request at any time
+ * by the framework. Once a gralloc buffer is returned to the framework
+ * with process_capture_result (and its respective release_fence has been
+ * signaled) the framework may free or reuse it at any time.
+ *
+ * ------------------------------------------------------------------------
+ *
+ * Preconditions:
+ *
+ * The framework will only call this method when no captures are being
+ * processed. That is, all results have been returned to the framework, and
+ * all in-flight input and output buffers have been returned and their
+ * release sync fences have been signaled by the HAL. The framework will not
+ * submit new requests for capture while the configure_streams() call is
+ * underway.
+ *
+ * Postconditions:
+ *
+ * The HAL device must configure itself to provide maximum possible output
+ * frame rate given the sizes and formats of the output streams, as
+ * documented in the camera device's static metadata.
+ *
+ * Performance requirements:
+ *
+ * This call is expected to be heavyweight and possibly take several hundred
+ * milliseconds to complete, since it may require resetting and
+ * reconfiguring the image sensor and the camera processing pipeline.
+ * Nevertheless, the HAL device should attempt to minimize the
+ * reconfiguration delay to minimize the user-visible pauses during
+ * application operational mode changes (such as switching from still
+ * capture to video recording).
+ *
+ * The HAL should return from this call in 500ms, and must return from this
+ * call in 1000ms.
+ *
+ * Return values:
+ *
+ * 0: On successful stream configuration
+ *
+ * -EINVAL: If the requested stream configuration is invalid. Some examples
+ * of invalid stream configurations include:
+ *
+ * - Including more than 1 input-capable stream (INPUT or
+ * BIDIRECTIONAL)
+ *
+ * - Not including any output-capable streams (OUTPUT or
+ * BIDIRECTIONAL)
+ *
+ * - Including streams with unsupported formats, or an unsupported
+ * size for that format.
+ *
+ * - Including too many output streams of a certain format.
+ *
+ * - Unsupported rotation configuration (only applies to
+ * devices with version >= CAMERA_DEVICE_API_VERSION_3_3)
+ *
+ * - Stream sizes/formats don't satisfy the
+ * camera3_stream_configuration_t->operation_mode requirements for non-NORMAL mode,
+ * or the requested operation_mode is not supported by the HAL.
+ * (only applies to devices with version >= CAMERA_DEVICE_API_VERSION_3_3)
+ *
+ * Note that the framework submitting an invalid stream
+ * configuration is not normal operation, since stream
+ * configurations are checked before configure. An invalid
+ * configuration means that a bug exists in the framework code, or
+ * there is a mismatch between the HAL's static metadata and the
+ * requirements on streams.
+ *
+ * -ENODEV: If there has been a fatal error and the device is no longer
+ * operational. Only close() can be called successfully by the
+ * framework after this error is returned.
+ */
+ int (*configure_streams)(const struct camera3_device *,
+ camera3_stream_configuration_t *stream_list);
+
+ /**
+ * register_stream_buffers:
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * DEPRECATED. This will not be called and must be set to NULL.
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * Register buffers for a given stream with the HAL device. This method is
+ * called by the framework after a new stream is defined by
+ * configure_streams, and before buffers from that stream are included in a
+ * capture request. If the same stream is listed in a subsequent
+ * configure_streams() call, register_stream_buffers will _not_ be called
+ * again for that stream.
+ *
+ * The framework does not need to register buffers for all configured
+ * streams before it submits the first capture request. This allows quick
+ * startup for preview (or similar use cases) while other streams are still
+ * being allocated.
+ *
+ * This method is intended to allow the HAL device to map or otherwise
+ * prepare the buffers for later use. The buffers passed in will already be
+ * locked for use. At the end of the call, all the buffers must be ready to
+ * be returned to the stream. The buffer_set argument is only valid for the
+ * duration of this call.
+ *
+ * If the stream format was set to HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED,
+ * the camera HAL should inspect the passed-in buffers here to determine any
+ * platform-private pixel format information.
+ *
+ * Performance requirements:
+ *
+ * This should be a non-blocking call. The HAL should return from this call
+ * in 1ms, and must return from this call in 5ms.
+ *
+ * Return values:
+ *
+ * 0: On successful registration of the new stream buffers
+ *
+ * -EINVAL: If the stream_buffer_set does not refer to a valid active
+ * stream, or if the buffers array is invalid.
+ *
+ * -ENOMEM: If there was a failure in registering the buffers. The framework
+ * must consider all the stream buffers to be unregistered, and can
+ * try to register again later.
+ *
+ * -ENODEV: If there is a fatal error, and the device is no longer
+ * operational. Only close() can be called successfully by the
+ * framework after this error is returned.
+ */
+ int (*register_stream_buffers)(const struct camera3_device *,
+ const camera3_stream_buffer_set_t *buffer_set);
+
+ /**********************************************************************
+ * Request creation and submission
+ */
+
+ /**
+ * construct_default_request_settings:
+ *
+ * Create capture settings for standard camera use cases.
+ *
+ * The device must return a settings buffer that is configured to meet the
+ * requested use case, which must be one of the CAMERA3_TEMPLATE_*
+ * enums. All request control fields must be included.
+ *
+ * The HAL retains ownership of this structure, but the pointer to the
+ * structure must be valid until the device is closed. The framework and the
+ * HAL may not modify the buffer once it is returned by this call. The same
+ * buffer may be returned for subsequent calls for the same template, or for
+ * other templates.
+ *
+ * Performance requirements:
+ *
+ * This should be a non-blocking call. The HAL should return from this call
+ * in 1ms, and must return from this call in 5ms.
+ *
+ * Return values:
+ *
+ * Valid metadata: On successful creation of a default settings
+ * buffer.
+ *
+ * NULL: In case of a fatal error. After this is returned, only
+ * the close() method can be called successfully by the
+ * framework.
+ */
+ const camera_metadata_t* (*construct_default_request_settings)(
+ const struct camera3_device *,
+ int type);
+
+ /**
+ * process_capture_request:
+ *
+ * Send a new capture request to the HAL. The HAL should not return from
+ * this call until it is ready to accept the next request to process. Only
+ * one call to process_capture_request() will be made at a time by the
+ * framework, and the calls will all be from the same thread. The next call
+ * to process_capture_request() will be made as soon as a new request and
+ * its associated buffers are available. In a normal preview scenario, this
+ * means the function will be called again by the framework almost
+ * instantly.
+ *
+ * The actual request processing is asynchronous, with the results of
+ * capture being returned by the HAL through the process_capture_result()
+ * call. This call requires the result metadata to be available, but output
+ * buffers may simply provide sync fences to wait on. Multiple requests are
+ * expected to be in flight at once, to maintain full output frame rate.
+ *
+ * The framework retains ownership of the request structure. It is only
+ * guaranteed to be valid during this call. The HAL device must make copies
+ * of the information it needs to retain for the capture processing. The HAL
+ * is responsible for waiting on and closing the buffers' fences and
+ * returning the buffer handles to the framework.
+ *
+ * The HAL must write the file descriptor for the input buffer's release
+ * sync fence into input_buffer->release_fence, if input_buffer is not
+ * NULL. If the HAL returns -1 for the input buffer release sync fence, the
+ * framework is free to immediately reuse the input buffer. Otherwise, the
+ * framework will wait on the sync fence before refilling and reusing the
+ * input buffer.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * The input/output buffers provided by the framework in each request
+ * may be brand new (having never before seen by the HAL).
+ *
+ * ------------------------------------------------------------------------
+ * Performance considerations:
+ *
+ * Handling a new buffer should be extremely lightweight and there should be
+ * no frame rate degradation or frame jitter introduced.
+ *
+ * This call must return fast enough to ensure that the requested frame
+ * rate can be sustained, especially for streaming cases (post-processing
+ * quality settings set to FAST). The HAL should return this call in 1
+ * frame interval, and must return from this call in 4 frame intervals.
+ *
+ * Return values:
+ *
+ * 0: On a successful start to processing the capture request
+ *
+ * -EINVAL: If the input is malformed (the settings are NULL when not
+ * allowed, there are 0 output buffers, etc) and capture processing
+ * cannot start. Failures during request processing should be
+ * handled by calling camera3_callback_ops_t.notify(). In case of
+ * this error, the framework will retain responsibility for the
+ * stream buffers' fences and the buffer handles; the HAL should
+ * not close the fences or return these buffers with
+ * process_capture_result.
+ *
+ * -ENODEV: If the camera device has encountered a serious error. After this
+ * error is returned, only the close() method can be successfully
+ * called by the framework.
+ *
+ */
+ int (*process_capture_request)(const struct camera3_device *,
+ camera3_capture_request_t *request);
+
+ /**********************************************************************
+ * Miscellaneous methods
+ */
+
+ /**
+ * get_metadata_vendor_tag_ops:
+ *
+ * Get methods to query for vendor extension metadata tag information. The
+ * HAL should fill in all the vendor tag operation methods, or leave ops
+ * unchanged if no vendor tags are defined.
+ *
+ * The definition of vendor_tag_query_ops_t can be found in
+ * system/media/camera/include/system/camera_metadata.h.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ * DEPRECATED. This function has been deprecated and should be set to
+ * NULL by the HAL. Please implement get_vendor_tag_ops in camera_common.h
+ * instead.
+ */
+ void (*get_metadata_vendor_tag_ops)(const struct camera3_device*,
+ vendor_tag_query_ops_t* ops);
+
+ /**
+ * dump:
+ *
+ * Print out debugging state for the camera device. This will be called by
+ * the framework when the camera service is asked for a debug dump, which
+ * happens when using the dumpsys tool, or when capturing a bugreport.
+ *
+ * The passed-in file descriptor can be used to write debugging text using
+ * dprintf() or write(). The text should be in ASCII encoding only.
+ *
+ * Performance requirements:
+ *
+ * This must be a non-blocking call. The HAL should return from this call
+ * in 1ms, must return from this call in 10ms. This call must avoid
+ * deadlocks, as it may be called at any point during camera operation.
+ * Any synchronization primitives used (such as mutex locks or semaphores)
+ * should be acquired with a timeout.
+ */
+ void (*dump)(const struct camera3_device *, int fd);
+
+ /**
+ * flush:
+ *
+ * Flush all currently in-process captures and all buffers in the pipeline
+ * on the given device. The framework will use this to dump all state as
+ * quickly as possible in order to prepare for a configure_streams() call.
+ *
+ * No buffers are required to be successfully returned, so every buffer
+ * held at the time of flush() (whether successfully filled or not) may be
+ * returned with CAMERA3_BUFFER_STATUS_ERROR. Note the HAL is still allowed
+ * to return valid (CAMERA3_BUFFER_STATUS_OK) buffers during this call,
+ * provided they are successfully filled.
+ *
+ * All requests currently in the HAL are expected to be returned as soon as
+ * possible. Not-in-process requests should return errors immediately. Any
+ * interruptible hardware blocks should be stopped, and any uninterruptible
+ * blocks should be waited on.
+ *
+ * flush() may be called concurrently to process_capture_request(), with the expectation that
+ * process_capture_request will return quickly and the request submitted in that
+ * process_capture_request call is treated like all other in-flight requests. Due to
+ * concurrency issues, it is possible that from the HAL's point of view, a
+ * process_capture_request() call may be started after flush has been invoked but has not
+ * returned yet. If such a call happens before flush() returns, the HAL should treat the new
+ * capture request like other in-flight pending requests (see #4 below).
+ *
+ * More specifically, the HAL must follow below requirements for various cases:
+ *
+ * 1. For captures that are too late for the HAL to cancel/stop, and will be
+ * completed normally by the HAL; i.e. the HAL can send shutter/notify and
+ * process_capture_result and buffers as normal.
+ *
+ * 2. For pending requests that have not done any processing, the HAL must call notify
+ * CAMERA3_MSG_ERROR_REQUEST, and return all the output buffers with
+ * process_capture_result in the error state (CAMERA3_BUFFER_STATUS_ERROR).
+ * The HAL must not place the release fence into an error state, instead,
+ * the release fences must be set to the acquire fences passed by the framework,
+ * or -1 if they have been waited on by the HAL already. This is also the path
+ * to follow for any captures for which the HAL already called notify() with
+ * CAMERA3_MSG_SHUTTER but won't be producing any metadata/valid buffers for.
+ * After CAMERA3_MSG_ERROR_REQUEST, for a given frame, only process_capture_results with
+ * buffers in CAMERA3_BUFFER_STATUS_ERROR are allowed. No further notifys or
+ * process_capture_result with non-null metadata is allowed.
+ *
+ * 3. For partially completed pending requests that will not have all the output
+ * buffers or perhaps missing metadata, the HAL should follow below:
+ *
+ * 3.1. Call notify with CAMERA3_MSG_ERROR_RESULT if some of the expected result
+ * metadata (i.e. one or more partial metadata) won't be available for the capture.
+ *
+ * 3.2. Call notify with CAMERA3_MSG_ERROR_BUFFER for every buffer that won't
+ * be produced for the capture.
+ *
+ * 3.3 Call notify with CAMERA3_MSG_SHUTTER with the capture timestamp before
+ * any buffers/metadata are returned with process_capture_result.
+ *
+ * 3.4 For captures that will produce some results, the HAL must not call
+ * CAMERA3_MSG_ERROR_REQUEST, since that indicates complete failure.
+ *
+ * 3.5. Valid buffers/metadata should be passed to the framework as normal.
+ *
+ * 3.6. Failed buffers should be returned to the framework as described for case 2.
+ * But failed buffers do not have to follow the strict ordering valid buffers do,
+ * and may be out-of-order with respect to valid buffers. For example, if buffers
+ * A, B, C, D, E are sent, D and E are failed, then A, E, B, D, C is an acceptable
+ * return order.
+ *
+ * 3.7. For fully-missing metadata, calling CAMERA3_MSG_ERROR_RESULT is sufficient, no
+ * need to call process_capture_result with NULL metadata or equivalent.
+ *
+ * 4. If a flush() is invoked while a process_capture_request() invocation is active, that
+ * process call should return as soon as possible. In addition, if a process_capture_request()
+ * call is made after flush() has been invoked but before flush() has returned, the
+ * capture request provided by the late process_capture_request call should be treated like
+ * a pending request in case #2 above.
+ *
+ * flush() should only return when there are no more outstanding buffers or
+ * requests left in the HAL. The framework may call configure_streams (as
+ * the HAL state is now quiesced) or may issue new requests.
+ *
+ * Note that it's sufficient to only support fully-succeeded and fully-failed result cases.
+ * However, it is highly desirable to support the partial failure cases as well, as it
+ * could help improve the flush call overall performance.
+ *
+ * Performance requirements:
+ *
+ * The HAL should return from this call in 100ms, and must return from this
+ * call in 1000ms. And this call must not be blocked longer than pipeline
+ * latency (see S7 for definition).
+ *
+ * Version information:
+ *
+ * only available if device version >= CAMERA_DEVICE_API_VERSION_3_1.
+ *
+ * Return values:
+ *
+ * 0: On a successful flush of the camera HAL.
+ *
+ * -EINVAL: If the input is malformed (the device is not valid).
+ *
+ * -ENODEV: If the camera device has encountered a serious error. After this
+ * error is returned, only the close() method can be successfully
+ * called by the framework.
+ */
+ int (*flush)(const struct camera3_device *);
+
+ /* reserved for future use */
+ void *reserved[8];
+} camera3_device_ops_t;
+
+/**********************************************************************
+ *
+ * Camera device definition
+ *
+ */
+typedef struct camera3_device {
+ /**
+ * common.version must equal CAMERA_DEVICE_API_VERSION_3_0 to identify this
+ * device as implementing version 3.0 of the camera device HAL.
+ *
+ * Performance requirements:
+ *
+ * Camera open (common.module->common.methods->open) should return in 200ms, and must return
+ * in 500ms.
+ * Camera close (common.close) should return in 200ms, and must return in 500ms.
+ *
+ */
+ hw_device_t common;
+ camera3_device_ops_t *ops;
+ void *priv;
+} camera3_device_t;
+
+__END_DECLS
+
+#endif /* #ifdef ANDROID_INCLUDE_CAMERA3_H */
diff --git a/include/android/hardware/libhardware/include/hardware/camera_common.h b/include/android/hardware/libhardware/include/hardware/camera_common.h
new file mode 100644
index 00000000..7658dd40
--- /dev/null
+++ b/include/android/hardware/libhardware/include/hardware/camera_common.h
@@ -0,0 +1,916 @@
+/*
+ * Copyright (C) 2012 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+// FIXME: add well-defined names for cameras
+
+#ifndef ANDROID_INCLUDE_CAMERA_COMMON_H
+#define ANDROID_INCLUDE_CAMERA_COMMON_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+#include <cutils/native_handle.h>
+#include <system/camera.h>
+#include <system/camera_vendor_tags.h>
+#include <hardware/hardware.h>
+#include <hardware/gralloc.h>
+
+__BEGIN_DECLS
+
+/**
+ * The id of this module
+ */
+#define CAMERA_HARDWARE_MODULE_ID "camera"
+
+/**
+ * Module versioning information for the Camera hardware module, based on
+ * camera_module_t.common.module_api_version. The two most significant hex
+ * digits represent the major version, and the two least significant represent
+ * the minor version.
+ *
+ *******************************************************************************
+ * Versions: 0.X - 1.X [CAMERA_MODULE_API_VERSION_1_0]
+ *
+ * Camera modules that report these version numbers implement the initial
+ * camera module HAL interface. All camera devices openable through this
+ * module support only version 1 of the camera device HAL. The device_version
+ * and static_camera_characteristics fields of camera_info are not valid. Only
+ * the android.hardware.Camera API can be supported by this module and its
+ * devices.
+ *
+ *******************************************************************************
+ * Version: 2.0 [CAMERA_MODULE_API_VERSION_2_0]
+ *
+ * Camera modules that report this version number implement the second version
+ * of the camera module HAL interface. Camera devices openable through this
+ * module may support either version 1.0 or version 2.0 of the camera device
+ * HAL interface. The device_version field of camera_info is always valid; the
+ * static_camera_characteristics field of camera_info is valid if the
+ * device_version field is 2.0 or higher.
+ *
+ *******************************************************************************
+ * Version: 2.1 [CAMERA_MODULE_API_VERSION_2_1]
+ *
+ * This camera module version adds support for asynchronous callbacks to the
+ * framework from the camera HAL module, which is used to notify the framework
+ * about changes to the camera module state. Modules that provide a valid
+ * set_callbacks() method must report at least this version number.
+ *
+ *******************************************************************************
+ * Version: 2.2 [CAMERA_MODULE_API_VERSION_2_2]
+ *
+ * This camera module version adds vendor tag support from the module, and
+ * deprecates the old vendor_tag_query_ops that were previously only
+ * accessible with a device open.
+ *
+ *******************************************************************************
+ * Version: 2.3 [CAMERA_MODULE_API_VERSION_2_3]
+ *
+ * This camera module version adds open legacy camera HAL device support.
+ * Framework can use it to open the camera device as lower device HAL version
+ * HAL device if the same device can support multiple device API versions.
+ * The standard hardware module open call (common.methods->open) continues
+ * to open the camera device with the latest supported version, which is
+ * also the version listed in camera_info_t.device_version.
+ *
+ *******************************************************************************
+ * Version: 2.4 [CAMERA_MODULE_API_VERSION_2_4]
+ *
+ * This camera module version adds below API changes:
+ *
+ * 1. Torch mode support. The framework can use it to turn on torch mode for
+ * any camera device that has a flash unit, without opening a camera device. The
+ * camera device has a higher priority accessing the flash unit than the camera
+ * module; opening a camera device will turn off the torch if it had been enabled
+ * through the module interface. When there are any resource conflicts, such as
+ * open() is called to open a camera device, the camera HAL module must notify the
+ * framework through the torch mode status callback that the torch mode has been
+ * turned off.
+ *
+ * 2. External camera (e.g. USB hot-plug camera) support. The API updates specify that
+ * the camera static info is only available when camera is connected and ready to
+ * use for external hot-plug cameras. Calls to get static info will be invalid
+ * calls when camera status is not CAMERA_DEVICE_STATUS_PRESENT. The frameworks
+ * will only count on device status change callbacks to manage the available external
+ * camera list.
+ *
+ * 3. Camera arbitration hints. This module version adds support for explicitly
+ * indicating the number of camera devices that can be simultaneously opened and used.
+ * To specify valid combinations of devices, the resource_cost and conflicting_devices
+ * fields should always be set in the camera_info structure returned by the
+ * get_camera_info call.
+ *
+ * 4. Module initialization method. This will be called by the camera service
+ * right after the HAL module is loaded, to allow for one-time initialization
+ * of the HAL. It is called before any other module methods are invoked.
+ */
+
+/**
+ * Predefined macros for currently-defined version numbers
+ */
+
+/**
+ * All module versions <= HARDWARE_MODULE_API_VERSION(1, 0xFF) must be treated
+ * as CAMERA_MODULE_API_VERSION_1_0
+ */
+#define CAMERA_MODULE_API_VERSION_1_0 HARDWARE_MODULE_API_VERSION(1, 0)
+#define CAMERA_MODULE_API_VERSION_2_0 HARDWARE_MODULE_API_VERSION(2, 0)
+#define CAMERA_MODULE_API_VERSION_2_1 HARDWARE_MODULE_API_VERSION(2, 1)
+#define CAMERA_MODULE_API_VERSION_2_2 HARDWARE_MODULE_API_VERSION(2, 2)
+#define CAMERA_MODULE_API_VERSION_2_3 HARDWARE_MODULE_API_VERSION(2, 3)
+#define CAMERA_MODULE_API_VERSION_2_4 HARDWARE_MODULE_API_VERSION(2, 4)
+
+#define CAMERA_MODULE_API_VERSION_CURRENT CAMERA_MODULE_API_VERSION_2_4
+
+/**
+ * All device versions <= HARDWARE_DEVICE_API_VERSION(1, 0xFF) must be treated
+ * as CAMERA_DEVICE_API_VERSION_1_0
+ */
+#define CAMERA_DEVICE_API_VERSION_1_0 HARDWARE_DEVICE_API_VERSION(1, 0)
+#define CAMERA_DEVICE_API_VERSION_2_0 HARDWARE_DEVICE_API_VERSION(2, 0)
+#define CAMERA_DEVICE_API_VERSION_2_1 HARDWARE_DEVICE_API_VERSION(2, 1)
+#define CAMERA_DEVICE_API_VERSION_3_0 HARDWARE_DEVICE_API_VERSION(3, 0)
+#define CAMERA_DEVICE_API_VERSION_3_1 HARDWARE_DEVICE_API_VERSION(3, 1)
+#define CAMERA_DEVICE_API_VERSION_3_2 HARDWARE_DEVICE_API_VERSION(3, 2)
+#define CAMERA_DEVICE_API_VERSION_3_3 HARDWARE_DEVICE_API_VERSION(3, 3)
+
+// Device version 3.3 is current, older HAL camera device versions are not
+// recommended for new devices.
+#define CAMERA_DEVICE_API_VERSION_CURRENT CAMERA_DEVICE_API_VERSION_3_3
+
+/**
+ * Defined in /system/media/camera/include/system/camera_metadata.h
+ */
+typedef struct camera_metadata camera_metadata_t;
+
+typedef struct camera_info {
+ /**
+ * The direction that the camera faces to. See system/core/include/system/camera.h
+ * for camera facing definitions.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * It should be CAMERA_FACING_BACK or CAMERA_FACING_FRONT.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4 or higher:
+ *
+ * It should be CAMERA_FACING_BACK, CAMERA_FACING_FRONT or
+ * CAMERA_FACING_EXTERNAL.
+ */
+ int facing;
+
+ /**
+ * The orientation of the camera image. The value is the angle that the
+ * camera image needs to be rotated clockwise so it shows correctly on the
+ * display in its natural orientation. It should be 0, 90, 180, or 270.
+ *
+ * For example, suppose a device has a naturally tall screen. The
+ * back-facing camera sensor is mounted in landscape. You are looking at the
+ * screen. If the top side of the camera sensor is aligned with the right
+ * edge of the screen in natural orientation, the value should be 90. If the
+ * top side of a front-facing camera sensor is aligned with the right of the
+ * screen, the value should be 270.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * Valid in all camera_module versions.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4 or higher:
+ *
+ * Valid if camera facing is CAMERA_FACING_BACK or CAMERA_FACING_FRONT,
+ * not valid if camera facing is CAMERA_FACING_EXTERNAL.
+ */
+ int orientation;
+
+ /**
+ * The value of camera_device_t.common.version.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_1_0:
+ *
+ * Not valid. Can be assumed to be CAMERA_DEVICE_API_VERSION_1_0. Do
+ * not read this field.
+ *
+ * CAMERA_MODULE_API_VERSION_2_0 or higher:
+ *
+ * Always valid
+ *
+ */
+ uint32_t device_version;
+
+ /**
+ * The camera's fixed characteristics, which include all static camera metadata
+ * specified in system/media/camera/docs/docs.html. This should be a sorted metadata
+ * buffer, and may not be modified or freed by the caller. The pointer should remain
+ * valid for the lifetime of the camera module, and values in it may not
+ * change after it is returned by get_camera_info().
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_1_0:
+ *
+ * Not valid. Extra characteristics are not available. Do not read this
+ * field.
+ *
+ * CAMERA_MODULE_API_VERSION_2_0 or higher:
+ *
+ * Valid if device_version >= CAMERA_DEVICE_API_VERSION_2_0. Do not read
+ * otherwise.
+ *
+ */
+ const camera_metadata_t *static_camera_characteristics;
+
+ /**
+ * The total resource "cost" of using this camera, represented as an integer
+ * value in the range [0, 100] where 100 represents total usage of the shared
+ * resource that is the limiting bottleneck of the camera subsystem. This may
+ * be a very rough estimate, and is used as a hint to the camera service to
+ * determine when to disallow multiple applications from simultaneously
+ * opening different cameras advertised by the camera service.
+ *
+ * The camera service must be able to simultaneously open and use any
+ * combination of camera devices exposed by the HAL where the sum of
+ * the resource costs of these cameras is <= 100. For determining cost,
+ * each camera device must be assumed to be configured and operating at
+ * the maximally resource-consuming framerate and stream size settings
+ * available in the configuration settings exposed for that device through
+ * the camera metadata.
+ *
+ * The camera service may still attempt to simultaneously open combinations
+ * of camera devices with a total resource cost > 100. This may succeed or
+ * fail. If this succeeds, combinations of configurations that are not
+ * supported due to resource constraints from having multiple open devices
+ * should fail during the configure calls. If the total resource cost is
+ * <= 100, open and configure should never fail for any stream configuration
+ * settings or other device capabilities that would normally succeed for a
+ * device when it is the only open camera device.
+ *
+ * This field will be used to determine whether background applications are
+ * allowed to use this camera device while other applications are using other
+ * camera devices. Note: multiple applications will never be allowed by the
+ * camera service to simultaneously open the same camera device.
+ *
+ * Example use cases:
+ *
+ * Ex. 1: Camera Device 0 = Back Camera
+ * Camera Device 1 = Front Camera
+ * - Using both camera devices causes a large framerate slowdown due to
+ * limited ISP bandwidth.
+ *
+ * Configuration:
+ *
+ * Camera Device 0 - resource_cost = 51
+ * conflicting_devices = null
+ * Camera Device 1 - resource_cost = 51
+ * conflicting_devices = null
+ *
+ * Result:
+ *
+ * Since the sum of the resource costs is > 100, if a higher-priority
+ * application has either device open, no lower-priority applications will be
+ * allowed by the camera service to open either device. If a lower-priority
+ * application is using a device that a higher-priority subsequently attempts
+ * to open, the lower-priority application will be forced to disconnect the
+ * the device.
+ *
+ * If the highest-priority application chooses, it may still attempt to open
+ * both devices (since these devices are not listed as conflicting in the
+ * conflicting_devices fields), but usage of these devices may fail in the
+ * open or configure calls.
+ *
+ * Ex. 2: Camera Device 0 = Left Back Camera
+ * Camera Device 1 = Right Back Camera
+ * Camera Device 2 = Combined stereo camera using both right and left
+ * back camera sensors used by devices 0, and 1
+ * Camera Device 3 = Front Camera
+ * - Due to do hardware constraints, up to two cameras may be open at once. The
+ * combined stereo camera may never be used at the same time as either of the
+ * two back camera devices (device 0, 1), and typically requires too much
+ * bandwidth to use at the same time as the front camera (device 3).
+ *
+ * Configuration:
+ *
+ * Camera Device 0 - resource_cost = 50
+ * conflicting_devices = { 2 }
+ * Camera Device 1 - resource_cost = 50
+ * conflicting_devices = { 2 }
+ * Camera Device 2 - resource_cost = 100
+ * conflicting_devices = { 0, 1 }
+ * Camera Device 3 - resource_cost = 50
+ * conflicting_devices = null
+ *
+ * Result:
+ *
+ * Based on the conflicting_devices fields, the camera service guarantees that
+ * the following sets of open devices will never be allowed: { 1, 2 }, { 0, 2 }.
+ *
+ * Based on the resource_cost fields, if a high-priority foreground application
+ * is using camera device 0, a background application would be allowed to open
+ * camera device 1 or 3 (but would be forced to disconnect it again if the
+ * foreground application opened another device).
+ *
+ * The highest priority application may still attempt to simultaneously open
+ * devices 0, 2, and 3, but the HAL may fail in open or configure calls for
+ * this combination.
+ *
+ * Ex. 3: Camera Device 0 = Back Camera
+ * Camera Device 1 = Front Camera
+ * Camera Device 2 = Low-power Front Camera that uses the same
+ * sensor as device 1, but only exposes image stream
+ * resolutions that can be used in low-power mode
+ * - Using both front cameras (device 1, 2) at the same time is impossible due
+ * a shared physical sensor. Using the back and "high-power" front camera
+ * (device 1) may be impossible for some stream configurations due to hardware
+ * limitations, but the "low-power" front camera option may always be used as
+ * it has special dedicated hardware.
+ *
+ * Configuration:
+ *
+ * Camera Device 0 - resource_cost = 100
+ * conflicting_devices = null
+ * Camera Device 1 - resource_cost = 100
+ * conflicting_devices = { 2 }
+ * Camera Device 2 - resource_cost = 0
+ * conflicting_devices = { 1 }
+ * Result:
+ *
+ * Based on the conflicting_devices fields, the camera service guarantees that
+ * the following sets of open devices will never be allowed: { 1, 2 }.
+ *
+ * Based on the resource_cost fields, only the highest priority application
+ * may attempt to open both device 0 and 1 at the same time. If a higher-priority
+ * application is not using device 1 or 2, a low-priority background application
+ * may open device 2 (but will be forced to disconnect it if a higher-priority
+ * application subsequently opens device 1 or 2).
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * Not valid. Can be assumed to be 100. Do not read this field.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4 or higher:
+ *
+ * Always valid.
+ */
+ int resource_cost;
+
+ /**
+ * An array of camera device IDs represented as NULL-terminated strings
+ * indicating other devices that cannot be simultaneously opened while this
+ * camera device is in use.
+ *
+ * This field is intended to be used to indicate that this camera device
+ * is a composite of several other camera devices, or otherwise has
+ * hardware dependencies that prohibit simultaneous usage. If there are no
+ * dependencies, a NULL may be returned in this field to indicate this.
+ *
+ * The camera service will never simultaneously open any of the devices
+ * in this list while this camera device is open.
+ *
+ * The strings pointed to in this field will not be cleaned up by the camera
+ * service, and must remain while this device is plugged in.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * Not valid. Can be assumed to be NULL. Do not read this field.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4 or higher:
+ *
+ * Always valid.
+ */
+ char** conflicting_devices;
+
+ /**
+ * The length of the array given in the conflicting_devices field.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * Not valid. Can be assumed to be 0. Do not read this field.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4 or higher:
+ *
+ * Always valid.
+ */
+ size_t conflicting_devices_length;
+
+} camera_info_t;
+
+/**
+ * camera_device_status_t:
+ *
+ * The current status of the camera device, as provided by the HAL through the
+ * camera_module_callbacks.camera_device_status_change() call.
+ *
+ * At module load time, the framework will assume all camera devices are in the
+ * CAMERA_DEVICE_STATUS_PRESENT state. The HAL should invoke
+ * camera_module_callbacks::camera_device_status_change to inform the framework
+ * of any initially NOT_PRESENT devices.
+ *
+ * Allowed transitions:
+ * PRESENT -> NOT_PRESENT
+ * NOT_PRESENT -> ENUMERATING
+ * NOT_PRESENT -> PRESENT
+ * ENUMERATING -> PRESENT
+ * ENUMERATING -> NOT_PRESENT
+ */
+typedef enum camera_device_status {
+ /**
+ * The camera device is not currently connected, and opening it will return
+ * failure.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * Calls to get_camera_info must still succeed, and provide the same information
+ * it would if the camera were connected.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4:
+ *
+ * The camera device at this status must return -EINVAL for get_camera_info call,
+ * as the device is not connected.
+ */
+ CAMERA_DEVICE_STATUS_NOT_PRESENT = 0,
+
+ /**
+ * The camera device is connected, and opening it will succeed.
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * The information returned by get_camera_info cannot change due to this status
+ * change. By default, the framework will assume all devices are in this state.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4:
+ *
+ * The information returned by get_camera_info will become valid after a device's
+ * status changes to this. By default, the framework will assume all devices are in
+ * this state.
+ */
+ CAMERA_DEVICE_STATUS_PRESENT = 1,
+
+ /**
+ * The camera device is connected, but it is undergoing an enumeration and
+ * so opening the device will return -EBUSY.
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * Calls to get_camera_info must still succeed, as if the camera was in the
+ * PRESENT status.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4:
+ *
+ * The camera device at this status must return -EINVAL for get_camera_info for call,
+ * as the device is not ready.
+ */
+ CAMERA_DEVICE_STATUS_ENUMERATING = 2,
+
+} camera_device_status_t;
+
+/**
+ * torch_mode_status_t:
+ *
+ * The current status of the torch mode, as provided by the HAL through the
+ * camera_module_callbacks.torch_mode_status_change() call.
+ *
+ * The torch mode status of a camera device is applicable only when the camera
+ * device is present. The framework will not call set_torch_mode() to turn on
+ * torch mode of a camera device if the camera device is not present. At module
+ * load time, the framework will assume torch modes are in the
+ * TORCH_MODE_STATUS_AVAILABLE_OFF state if the camera device is present and
+ * android.flash.info.available is reported as true via get_camera_info() call.
+ *
+ * The behaviors of the camera HAL module that the framework expects in the
+ * following situations when a camera device's status changes:
+ * 1. A previously-disconnected camera device becomes connected.
+ * After camera_module_callbacks::camera_device_status_change() is invoked
+ * to inform the framework that the camera device is present, the framework
+ * will assume the camera device's torch mode is in
+ * TORCH_MODE_STATUS_AVAILABLE_OFF state. The camera HAL module does not need
+ * to invoke camera_module_callbacks::torch_mode_status_change() unless the
+ * flash unit is unavailable to use by set_torch_mode().
+ *
+ * 2. A previously-connected camera becomes disconnected.
+ * After camera_module_callbacks::camera_device_status_change() is invoked
+ * to inform the framework that the camera device is not present, the
+ * framework will not call set_torch_mode() for the disconnected camera
+ * device until its flash unit becomes available again. The camera HAL
+ * module does not need to invoke
+ * camera_module_callbacks::torch_mode_status_change() separately to inform
+ * that the flash unit has become unavailable.
+ *
+ * 3. open() is called to open a camera device.
+ * The camera HAL module must invoke
+ * camera_module_callbacks::torch_mode_status_change() for all flash units
+ * that have entered TORCH_MODE_STATUS_NOT_AVAILABLE state and can not be
+ * turned on by calling set_torch_mode() anymore due to this open() call.
+ * open() must not trigger TORCH_MODE_STATUS_AVAILABLE_OFF before
+ * TORCH_MODE_STATUS_NOT_AVAILABLE for all flash units that have become
+ * unavailable.
+ *
+ * 4. close() is called to close a camera device.
+ * The camera HAL module must invoke
+ * camera_module_callbacks::torch_mode_status_change() for all flash units
+ * that have entered TORCH_MODE_STATUS_AVAILABLE_OFF state and can be turned
+ * on by calling set_torch_mode() again because of enough resources freed
+ * up by this close() call.
+ *
+ * Note that the framework calling set_torch_mode() successfully must trigger
+ * TORCH_MODE_STATUS_AVAILABLE_OFF or TORCH_MODE_STATUS_AVAILABLE_ON callback
+ * for the given camera device. Additionally it must trigger
+ * TORCH_MODE_STATUS_AVAILABLE_OFF callbacks for other previously-on torch
+ * modes if HAL cannot keep multiple torch modes on simultaneously.
+ */
+typedef enum torch_mode_status {
+
+ /**
+ * The flash unit is no longer available and the torch mode can not be
+ * turned on by calling set_torch_mode(). If the torch mode is on, it
+ * will be turned off by HAL before HAL calls torch_mode_status_change().
+ */
+ TORCH_MODE_STATUS_NOT_AVAILABLE = 0,
+
+ /**
+ * A torch mode has become off and available to be turned on via
+ * set_torch_mode(). This may happen in the following
+ * cases:
+ * 1. After the resources to turn on the torch mode have become available.
+ * 2. After set_torch_mode() is called to turn off the torch mode.
+ * 3. After the framework turned on the torch mode of some other camera
+ * device and HAL had to turn off the torch modes of any camera devices
+ * that were previously on.
+ */
+ TORCH_MODE_STATUS_AVAILABLE_OFF = 1,
+
+ /**
+ * A torch mode has become on and available to be turned off via
+ * set_torch_mode(). This can happen only after set_torch_mode() is called
+ * to turn on the torch mode.
+ */
+ TORCH_MODE_STATUS_AVAILABLE_ON = 2,
+
+} torch_mode_status_t;
+
+/**
+ * Callback functions for the camera HAL module to use to inform the framework
+ * of changes to the camera subsystem.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * Each callback is called only by HAL modules implementing the indicated
+ * version or higher of the HAL module API interface.
+ *
+ * CAMERA_MODULE_API_VERSION_2_1:
+ * camera_device_status_change()
+ *
+ * CAMERA_MODULE_API_VERSION_2_4:
+ * torch_mode_status_change()
+
+ */
+typedef struct camera_module_callbacks {
+
+ /**
+ * camera_device_status_change:
+ *
+ * Callback to the framework to indicate that the state of a specific camera
+ * device has changed. At module load time, the framework will assume all
+ * camera devices are in the CAMERA_DEVICE_STATUS_PRESENT state. The HAL
+ * must call this method to inform the framework of any initially
+ * NOT_PRESENT devices.
+ *
+ * This callback is added for CAMERA_MODULE_API_VERSION_2_1.
+ *
+ * camera_module_callbacks: The instance of camera_module_callbacks_t passed
+ * to the module with set_callbacks.
+ *
+ * camera_id: The ID of the camera device that has a new status.
+ *
+ * new_status: The new status code, one of the camera_device_status_t enums,
+ * or a platform-specific status.
+ *
+ */
+ void (*camera_device_status_change)(const struct camera_module_callbacks*,
+ int camera_id,
+ int new_status);
+
+ /**
+ * torch_mode_status_change:
+ *
+ * Callback to the framework to indicate that the state of the torch mode
+ * of the flash unit associated with a specific camera device has changed.
+ * At module load time, the framework will assume the torch modes are in
+ * the TORCH_MODE_STATUS_AVAILABLE_OFF state if android.flash.info.available
+ * is reported as true via get_camera_info() call.
+ *
+ * This callback is added for CAMERA_MODULE_API_VERSION_2_4.
+ *
+ * camera_module_callbacks: The instance of camera_module_callbacks_t
+ * passed to the module with set_callbacks.
+ *
+ * camera_id: The ID of camera device whose flash unit has a new torch mode
+ * status.
+ *
+ * new_status: The new status code, one of the torch_mode_status_t enums.
+ */
+ void (*torch_mode_status_change)(const struct camera_module_callbacks*,
+ const char* camera_id,
+ int new_status);
+
+
+} camera_module_callbacks_t;
+
+typedef struct camera_module {
+ /**
+ * Common methods of the camera module. This *must* be the first member of
+ * camera_module as users of this structure will cast a hw_module_t to
+ * camera_module pointer in contexts where it's known the hw_module_t
+ * references a camera_module.
+ *
+ * The return values for common.methods->open for camera_module are:
+ *
+ * 0: On a successful open of the camera device.
+ *
+ * -ENODEV: The camera device cannot be opened due to an internal
+ * error.
+ *
+ * -EINVAL: The input arguments are invalid, i.e. the id is invalid,
+ * and/or the module is invalid.
+ *
+ * -EBUSY: The camera device was already opened for this camera id
+ * (by using this method or open_legacy),
+ * regardless of the device HAL version it was opened as.
+ *
+ * -EUSERS: The maximal number of camera devices that can be
+ * opened concurrently were opened already, either by
+ * this method or the open_legacy method.
+ *
+ * All other return values from common.methods->open will be treated as
+ * -ENODEV.
+ */
+ hw_module_t common;
+
+ /**
+ * get_number_of_cameras:
+ *
+ * Returns the number of camera devices accessible through the camera
+ * module. The camera devices are numbered 0 through N-1, where N is the
+ * value returned by this call. The name of the camera device for open() is
+ * simply the number converted to a string. That is, "0" for camera ID 0,
+ * "1" for camera ID 1.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * The value here must be static, and cannot change after the first call
+ * to this method.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4 or higher:
+ *
+ * The value here must be static, and must count only built-in cameras,
+ * which have CAMERA_FACING_BACK or CAMERA_FACING_FRONT camera facing values
+ * (camera_info.facing). The HAL must not include the external cameras
+ * (camera_info.facing == CAMERA_FACING_EXTERNAL) into the return value
+ * of this call. Frameworks will use camera_device_status_change callback
+ * to manage number of external cameras.
+ */
+ int (*get_number_of_cameras)(void);
+
+ /**
+ * get_camera_info:
+ *
+ * Return the static camera information for a given camera device. This
+ * information may not change for a camera device.
+ *
+ * Return values:
+ *
+ * 0: On a successful operation
+ *
+ * -ENODEV: The information cannot be provided due to an internal
+ * error.
+ *
+ * -EINVAL: The input arguments are invalid, i.e. the id is invalid,
+ * and/or the module is invalid.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_2_4 or higher:
+ *
+ * When a camera is disconnected, its camera id becomes invalid. Calling this
+ * this method with this invalid camera id will get -EINVAL and NULL camera
+ * static metadata (camera_info.static_camera_characteristics).
+ */
+ int (*get_camera_info)(int camera_id, struct camera_info *info);
+
+ /**
+ * set_callbacks:
+ *
+ * Provide callback function pointers to the HAL module to inform framework
+ * of asynchronous camera module events. The framework will call this
+ * function once after initial camera HAL module load, after the
+ * get_number_of_cameras() method is called for the first time, and before
+ * any other calls to the module.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_1_0, CAMERA_MODULE_API_VERSION_2_0:
+ *
+ * Not provided by HAL module. Framework may not call this function.
+ *
+ * CAMERA_MODULE_API_VERSION_2_1:
+ *
+ * Valid to be called by the framework.
+ *
+ * Return values:
+ *
+ * 0: On a successful operation
+ *
+ * -ENODEV: The operation cannot be completed due to an internal
+ * error.
+ *
+ * -EINVAL: The input arguments are invalid, i.e. the callbacks are
+ * null
+ */
+ int (*set_callbacks)(const camera_module_callbacks_t *callbacks);
+
+ /**
+ * get_vendor_tag_ops:
+ *
+ * Get methods to query for vendor extension metadata tag information. The
+ * HAL should fill in all the vendor tag operation methods, or leave ops
+ * unchanged if no vendor tags are defined.
+ *
+ * The vendor_tag_ops structure used here is defined in:
+ * system/media/camera/include/system/vendor_tags.h
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_1_x/2_0/2_1:
+ * Not provided by HAL module. Framework may not call this function.
+ *
+ * CAMERA_MODULE_API_VERSION_2_2:
+ * Valid to be called by the framework.
+ */
+ void (*get_vendor_tag_ops)(vendor_tag_ops_t* ops);
+
+ /**
+ * open_legacy:
+ *
+ * Open a specific legacy camera HAL device if multiple device HAL API
+ * versions are supported by this camera HAL module. For example, if the
+ * camera module supports both CAMERA_DEVICE_API_VERSION_1_0 and
+ * CAMERA_DEVICE_API_VERSION_3_2 device API for the same camera id,
+ * framework can call this function to open the camera device as
+ * CAMERA_DEVICE_API_VERSION_1_0 device.
+ *
+ * This is an optional method. A Camera HAL module does not need to support
+ * more than one device HAL version per device, and such modules may return
+ * -ENOSYS for all calls to this method. For all older HAL device API
+ * versions that are not supported, it may return -EOPNOTSUPP. When above
+ * cases occur, The normal open() method (common.methods->open) will be
+ * used by the framework instead.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_1_x/2_0/2_1/2_2:
+ * Not provided by HAL module. Framework will not call this function.
+ *
+ * CAMERA_MODULE_API_VERSION_2_3:
+ * Valid to be called by the framework.
+ *
+ * Return values:
+ *
+ * 0: On a successful open of the camera device.
+ *
+ * -ENOSYS This method is not supported.
+ *
+ * -EOPNOTSUPP: The requested HAL version is not supported by this method.
+ *
+ * -EINVAL: The input arguments are invalid, i.e. the id is invalid,
+ * and/or the module is invalid.
+ *
+ * -EBUSY: The camera device was already opened for this camera id
+ * (by using this method or common.methods->open method),
+ * regardless of the device HAL version it was opened as.
+ *
+ * -EUSERS: The maximal number of camera devices that can be
+ * opened concurrently were opened already, either by
+ * this method or common.methods->open method.
+ */
+ int (*open_legacy)(const struct hw_module_t* module, const char* id,
+ uint32_t halVersion, struct hw_device_t** device);
+
+ /**
+ * set_torch_mode:
+ *
+ * Turn on or off the torch mode of the flash unit associated with a given
+ * camera ID. If the operation is successful, HAL must notify the framework
+ * torch state by invoking
+ * camera_module_callbacks.torch_mode_status_change() with the new state.
+ *
+ * The camera device has a higher priority accessing the flash unit. When
+ * there are any resource conflicts, such as open() is called to open a
+ * camera device, HAL module must notify the framework through
+ * camera_module_callbacks.torch_mode_status_change() that the
+ * torch mode has been turned off and the torch mode state has become
+ * TORCH_MODE_STATUS_NOT_AVAILABLE. When resources to turn on torch mode
+ * become available again, HAL module must notify the framework through
+ * camera_module_callbacks.torch_mode_status_change() that the torch mode
+ * state has become TORCH_MODE_STATUS_AVAILABLE_OFF for set_torch_mode() to
+ * be called.
+ *
+ * When the framework calls set_torch_mode() to turn on the torch mode of a
+ * flash unit, if HAL cannot keep multiple torch modes on simultaneously,
+ * HAL should turn off the torch mode that was turned on by
+ * a previous set_torch_mode() call and notify the framework that the torch
+ * mode state of that flash unit has become TORCH_MODE_STATUS_AVAILABLE_OFF.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_1_x/2_0/2_1/2_2/2_3:
+ * Not provided by HAL module. Framework will not call this function.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4:
+ * Valid to be called by the framework.
+ *
+ * Return values:
+ *
+ * 0: On a successful operation.
+ *
+ * -ENOSYS: The camera device does not support this operation. It is
+ * returned if and only if android.flash.info.available is
+ * false.
+ *
+ * -EBUSY: The camera device is already in use.
+ *
+ * -EUSERS: The resources needed to turn on the torch mode are not
+ * available, typically because other camera devices are
+ * holding the resources to make using the flash unit not
+ * possible.
+ *
+ * -EINVAL: camera_id is invalid.
+ *
+ */
+ int (*set_torch_mode)(const char* camera_id, bool enabled);
+
+ /**
+ * init:
+ *
+ * This method is called by the camera service before any other methods
+ * are invoked, right after the camera HAL library has been successfully
+ * loaded. It may be left as NULL by the HAL module, if no initialization
+ * in needed.
+ *
+ * It can be used by HAL implementations to perform initialization and
+ * other one-time operations.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_1_x/2_0/2_1/2_2/2_3:
+ * Not provided by HAL module. Framework will not call this function.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4:
+ * If not NULL, will always be called by the framework once after the HAL
+ * module is loaded, before any other HAL module method is called.
+ *
+ * Return values:
+ *
+ * 0: On a successful operation.
+ *
+ * -ENODEV: Initialization cannot be completed due to an internal
+ * error. The HAL must be assumed to be in a nonfunctional
+ * state.
+ *
+ */
+ int (*init)();
+
+ /* reserved for future use */
+ void* reserved[5];
+} camera_module_t;
+
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_CAMERA_COMMON_H */
diff --git a/include/android/hardware/libhardware/include/hardware/fb.h b/include/android/hardware/libhardware/include/hardware/fb.h
new file mode 100644
index 00000000..9df94165
--- /dev/null
+++ b/include/android/hardware/libhardware/include/hardware/fb.h
@@ -0,0 +1,173 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#ifndef ANDROID_FB_INTERFACE_H
+#define ANDROID_FB_INTERFACE_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+#include <cutils/native_handle.h>
+
+#include <hardware/hardware.h>
+
+__BEGIN_DECLS
+
+#define GRALLOC_HARDWARE_FB0 "fb0"
+
+/*****************************************************************************/
+
+
+/*****************************************************************************/
+
+typedef struct framebuffer_device_t {
+ /**
+ * Common methods of the framebuffer device. This *must* be the first member of
+ * framebuffer_device_t as users of this structure will cast a hw_device_t to
+ * framebuffer_device_t pointer in contexts where it's known the hw_device_t references a
+ * framebuffer_device_t.
+ */
+ struct hw_device_t common;
+
+ /* flags describing some attributes of the framebuffer */
+ const uint32_t flags;
+
+ /* dimensions of the framebuffer in pixels */
+ const uint32_t width;
+ const uint32_t height;
+
+ /* frambuffer stride in pixels */
+ const int stride;
+
+ /* framebuffer pixel format */
+ const int format;
+
+ /* resolution of the framebuffer's display panel in pixel per inch*/
+ const float xdpi;
+ const float ydpi;
+
+ /* framebuffer's display panel refresh rate in frames per second */
+ const float fps;
+
+ /* min swap interval supported by this framebuffer */
+ const int minSwapInterval;
+
+ /* max swap interval supported by this framebuffer */
+ const int maxSwapInterval;
+
+ /* Number of framebuffers supported*/
+ const int numFramebuffers;
+
+ int reserved[7];
+
+ /*
+ * requests a specific swap-interval (same definition than EGL)
+ *
+ * Returns 0 on success or -errno on error.
+ */
+ int (*setSwapInterval)(struct framebuffer_device_t* window,
+ int interval);
+
+ /*
+ * This hook is OPTIONAL.
+ *
+ * It is non NULL If the framebuffer driver supports "update-on-demand"
+ * and the given rectangle is the area of the screen that gets
+ * updated during (*post)().
+ *
+ * This is useful on devices that are able to DMA only a portion of
+ * the screen to the display panel, upon demand -- as opposed to
+ * constantly refreshing the panel 60 times per second, for instance.
+ *
+ * Only the area defined by this rectangle is guaranteed to be valid, that
+ * is, the driver is not allowed to post anything outside of this
+ * rectangle.
+ *
+ * The rectangle evaluated during (*post)() and specifies which area
+ * of the buffer passed in (*post)() shall to be posted.
+ *
+ * return -EINVAL if width or height <=0, or if left or top < 0
+ */
+ int (*setUpdateRect)(struct framebuffer_device_t* window,
+ int left, int top, int width, int height);
+
+ /*
+ * Post <buffer> to the display (display it on the screen)
+ * The buffer must have been allocated with the
+ * GRALLOC_USAGE_HW_FB usage flag.
+ * buffer must be the same width and height as the display and must NOT
+ * be locked.
+ *
+ * The buffer is shown during the next VSYNC.
+ *
+ * If the same buffer is posted again (possibly after some other buffer),
+ * post() will block until the the first post is completed.
+ *
+ * Internally, post() is expected to lock the buffer so that a
+ * subsequent call to gralloc_module_t::(*lock)() with USAGE_RENDER or
+ * USAGE_*_WRITE will block until it is safe; that is typically once this
+ * buffer is shown and another buffer has been posted.
+ *
+ * Returns 0 on success or -errno on error.
+ */
+ int (*post)(struct framebuffer_device_t* dev, buffer_handle_t buffer);
+
+
+ /*
+ * The (*compositionComplete)() method must be called after the
+ * compositor has finished issuing GL commands for client buffers.
+ */
+
+ int (*compositionComplete)(struct framebuffer_device_t* dev);
+
+ /*
+ * This hook is OPTIONAL.
+ *
+ * If non NULL it will be caused by SurfaceFlinger on dumpsys
+ */
+ void (*dump)(struct framebuffer_device_t* dev, char *buff, int buff_len);
+
+ /*
+ * (*enableScreen)() is used to either blank (enable=0) or
+ * unblank (enable=1) the screen this framebuffer is attached to.
+ *
+ * Returns 0 on success or -errno on error.
+ */
+ int (*enableScreen)(struct framebuffer_device_t* dev, int enable);
+
+ void* reserved_proc[6];
+
+} framebuffer_device_t;
+
+
+/** convenience API for opening and closing a supported device */
+
+static inline int framebuffer_open(const struct hw_module_t* module,
+ struct framebuffer_device_t** device) {
+ return module->methods->open(module,
+ GRALLOC_HARDWARE_FB0, (struct hw_device_t**)device);
+}
+
+static inline int framebuffer_close(struct framebuffer_device_t* device) {
+ return device->common.close(&device->common);
+}
+
+
+__END_DECLS
+
+#endif // ANDROID_FB_INTERFACE_H
diff --git a/include/android/hardware/libhardware/include/hardware/gralloc.h b/include/android/hardware/libhardware/include/hardware/gralloc.h
new file mode 100644
index 00000000..ef86f903
--- /dev/null
+++ b/include/android/hardware/libhardware/include/hardware/gralloc.h
@@ -0,0 +1,384 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#ifndef ANDROID_GRALLOC_INTERFACE_H
+#define ANDROID_GRALLOC_INTERFACE_H
+
+#include <system/window.h>
+#include <system/graphics.h>
+#include <hardware/hardware.h>
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+#include <cutils/native_handle.h>
+
+#include <hardware/hardware.h>
+#include <hardware/fb.h>
+
+__BEGIN_DECLS
+
+/**
+ * Module versioning information for the Gralloc hardware module, based on
+ * gralloc_module_t.common.module_api_version.
+ *
+ * Version History:
+ *
+ * GRALLOC_MODULE_API_VERSION_0_1:
+ * Initial Gralloc hardware module API.
+ *
+ * GRALLOC_MODULE_API_VERSION_0_2:
+ * Add support for flexible YCbCr format with (*lock_ycbcr)() method.
+ *
+ * GRALLOC_MODULE_API_VERSION_0_3:
+ * Add support for fence passing to/from lock/unlock.
+ */
+
+#define GRALLOC_MODULE_API_VERSION_0_1 HARDWARE_MODULE_API_VERSION(0, 1)
+#define GRALLOC_MODULE_API_VERSION_0_2 HARDWARE_MODULE_API_VERSION(0, 2)
+#define GRALLOC_MODULE_API_VERSION_0_3 HARDWARE_MODULE_API_VERSION(0, 3)
+
+#define GRALLOC_DEVICE_API_VERSION_0_1 HARDWARE_DEVICE_API_VERSION(0, 1)
+
+/**
+ * The id of this module
+ */
+#define GRALLOC_HARDWARE_MODULE_ID "gralloc"
+
+/**
+ * Name of the graphics device to open
+ */
+
+#define GRALLOC_HARDWARE_GPU0 "gpu0"
+
+enum {
+ /* buffer is never read in software */
+ GRALLOC_USAGE_SW_READ_NEVER = 0x00000000,
+ /* buffer is rarely read in software */
+ GRALLOC_USAGE_SW_READ_RARELY = 0x00000002,
+ /* buffer is often read in software */
+ GRALLOC_USAGE_SW_READ_OFTEN = 0x00000003,
+ /* mask for the software read values */
+ GRALLOC_USAGE_SW_READ_MASK = 0x0000000F,
+
+ /* buffer is never written in software */
+ GRALLOC_USAGE_SW_WRITE_NEVER = 0x00000000,
+ /* buffer is rarely written in software */
+ GRALLOC_USAGE_SW_WRITE_RARELY = 0x00000020,
+ /* buffer is often written in software */
+ GRALLOC_USAGE_SW_WRITE_OFTEN = 0x00000030,
+ /* mask for the software write values */
+ GRALLOC_USAGE_SW_WRITE_MASK = 0x000000F0,
+
+ /* buffer will be used as an OpenGL ES texture */
+ GRALLOC_USAGE_HW_TEXTURE = 0x00000100,
+ /* buffer will be used as an OpenGL ES render target */
+ GRALLOC_USAGE_HW_RENDER = 0x00000200,
+ /* buffer will be used by the 2D hardware blitter */
+ GRALLOC_USAGE_HW_2D = 0x00000400,
+ /* buffer will be used by the HWComposer HAL module */
+ GRALLOC_USAGE_HW_COMPOSER = 0x00000800,
+ /* buffer will be used with the framebuffer device */
+ GRALLOC_USAGE_HW_FB = 0x00001000,
+
+ /* buffer should be displayed full-screen on an external display when
+ * possible */
+ GRALLOC_USAGE_EXTERNAL_DISP = 0x00002000,
+
+ /* Must have a hardware-protected path to external display sink for
+ * this buffer. If a hardware-protected path is not available, then
+ * either don't composite only this buffer (preferred) to the
+ * external sink, or (less desirable) do not route the entire
+ * composition to the external sink. */
+ GRALLOC_USAGE_PROTECTED = 0x00004000,
+
+ /* buffer may be used as a cursor */
+ GRALLOC_USAGE_CURSOR = 0x00008000,
+
+ /* buffer will be used with the HW video encoder */
+ GRALLOC_USAGE_HW_VIDEO_ENCODER = 0x00010000,
+ /* buffer will be written by the HW camera pipeline */
+ GRALLOC_USAGE_HW_CAMERA_WRITE = 0x00020000,
+ /* buffer will be read by the HW camera pipeline */
+ GRALLOC_USAGE_HW_CAMERA_READ = 0x00040000,
+ /* buffer will be used as part of zero-shutter-lag queue */
+ GRALLOC_USAGE_HW_CAMERA_ZSL = 0x00060000,
+ /* mask for the camera access values */
+ GRALLOC_USAGE_HW_CAMERA_MASK = 0x00060000,
+ /* mask for the software usage bit-mask */
+ GRALLOC_USAGE_HW_MASK = 0x00071F00,
+
+ /* buffer will be used as a RenderScript Allocation */
+ GRALLOC_USAGE_RENDERSCRIPT = 0x00100000,
+
+ /* Set by the consumer to indicate to the producer that they may attach a
+ * buffer that they did not detach from the BufferQueue. Will be filtered
+ * out by GRALLOC_USAGE_ALLOC_MASK, so gralloc modules will not need to
+ * handle this flag. */
+ GRALLOC_USAGE_FOREIGN_BUFFERS = 0x00200000,
+
+ /* Mask of all flags which could be passed to a gralloc module for buffer
+ * allocation. Any flags not in this mask do not need to be handled by
+ * gralloc modules. */
+ GRALLOC_USAGE_ALLOC_MASK = ~(GRALLOC_USAGE_FOREIGN_BUFFERS),
+
+ /* implementation-specific private usage flags */
+ GRALLOC_USAGE_PRIVATE_0 = 0x10000000,
+ GRALLOC_USAGE_PRIVATE_1 = 0x20000000,
+ GRALLOC_USAGE_PRIVATE_2 = 0x40000000,
+ GRALLOC_USAGE_PRIVATE_3 = 0x80000000,
+ GRALLOC_USAGE_PRIVATE_MASK = 0xF0000000,
+};
+
+/*****************************************************************************/
+
+/**
+ * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
+ * and the fields of this data structure must begin with hw_module_t
+ * followed by module specific information.
+ */
+typedef struct gralloc_module_t {
+ struct hw_module_t common;
+
+ /*
+ * (*registerBuffer)() must be called before a buffer_handle_t that has not
+ * been created with (*alloc_device_t::alloc)() can be used.
+ *
+ * This is intended to be used with buffer_handle_t's that have been
+ * received in this process through IPC.
+ *
+ * This function checks that the handle is indeed a valid one and prepares
+ * it for use with (*lock)() and (*unlock)().
+ *
+ * It is not necessary to call (*registerBuffer)() on a handle created
+ * with (*alloc_device_t::alloc)().
+ *
+ * returns an error if this buffer_handle_t is not valid.
+ */
+ int (*registerBuffer)(struct gralloc_module_t const* module,
+ buffer_handle_t handle);
+
+ /*
+ * (*unregisterBuffer)() is called once this handle is no longer needed in
+ * this process. After this call, it is an error to call (*lock)(),
+ * (*unlock)(), or (*registerBuffer)().
+ *
+ * This function doesn't close or free the handle itself; this is done
+ * by other means, usually through libcutils's native_handle_close() and
+ * native_handle_free().
+ *
+ * It is an error to call (*unregisterBuffer)() on a buffer that wasn't
+ * explicitly registered first.
+ */
+ int (*unregisterBuffer)(struct gralloc_module_t const* module,
+ buffer_handle_t handle);
+
+ /*
+ * The (*lock)() method is called before a buffer is accessed for the
+ * specified usage. This call may block, for instance if the h/w needs
+ * to finish rendering or if CPU caches need to be synchronized.
+ *
+ * The caller promises to modify only pixels in the area specified
+ * by (l,t,w,h).
+ *
+ * The content of the buffer outside of the specified area is NOT modified
+ * by this call.
+ *
+ * If usage specifies GRALLOC_USAGE_SW_*, vaddr is filled with the address
+ * of the buffer in virtual memory.
+ *
+ * Note calling (*lock)() on HAL_PIXEL_FORMAT_YCbCr_*_888 buffers will fail
+ * and return -EINVAL. These buffers must be locked with (*lock_ycbcr)()
+ * instead.
+ *
+ * THREADING CONSIDERATIONS:
+ *
+ * It is legal for several different threads to lock a buffer from
+ * read access, none of the threads are blocked.
+ *
+ * However, locking a buffer simultaneously for write or read/write is
+ * undefined, but:
+ * - shall not result in termination of the process
+ * - shall not block the caller
+ * It is acceptable to return an error or to leave the buffer's content
+ * into an indeterminate state.
+ *
+ * If the buffer was created with a usage mask incompatible with the
+ * requested usage flags here, -EINVAL is returned.
+ *
+ */
+
+ int (*lock)(struct gralloc_module_t const* module,
+ buffer_handle_t handle, int usage,
+ int l, int t, int w, int h,
+ void** vaddr);
+
+
+ /*
+ * The (*unlock)() method must be called after all changes to the buffer
+ * are completed.
+ */
+
+ int (*unlock)(struct gralloc_module_t const* module,
+ buffer_handle_t handle);
+
+
+ /* reserved for future use */
+ int (*perform)(struct gralloc_module_t const* module,
+ int operation, ... );
+
+ /*
+ * The (*lock_ycbcr)() method is like the (*lock)() method, with the
+ * difference that it fills a struct ycbcr with a description of the buffer
+ * layout, and zeroes out the reserved fields.
+ *
+ * If the buffer format is not compatible with a flexible YUV format (e.g.
+ * the buffer layout cannot be represented with the ycbcr struct), it
+ * will return -EINVAL.
+ *
+ * This method must work on buffers with HAL_PIXEL_FORMAT_YCbCr_*_888
+ * if supported by the device, as well as with any other format that is
+ * requested by the multimedia codecs when they are configured with a
+ * flexible-YUV-compatible color-format with android native buffers.
+ *
+ * Note that this method may also be called on buffers of other formats,
+ * including non-YUV formats.
+ *
+ * Added in GRALLOC_MODULE_API_VERSION_0_2.
+ */
+
+ int (*lock_ycbcr)(struct gralloc_module_t const* module,
+ buffer_handle_t handle, int usage,
+ int l, int t, int w, int h,
+ struct android_ycbcr *ycbcr);
+
+ /*
+ * The (*lockAsync)() method is like the (*lock)() method except
+ * that the buffer's sync fence object is passed into the lock
+ * call instead of requiring the caller to wait for completion.
+ *
+ * The gralloc implementation takes ownership of the fenceFd and
+ * is responsible for closing it when no longer needed.
+ *
+ * Added in GRALLOC_MODULE_API_VERSION_0_3.
+ */
+ int (*lockAsync)(struct gralloc_module_t const* module,
+ buffer_handle_t handle, int usage,
+ int l, int t, int w, int h,
+ void** vaddr, int fenceFd);
+
+ /*
+ * The (*unlockAsync)() method is like the (*unlock)() method
+ * except that a buffer sync fence object is returned from the
+ * lock call, representing the completion of any pending work
+ * performed by the gralloc implementation.
+ *
+ * The caller takes ownership of the fenceFd and is responsible
+ * for closing it when no longer needed.
+ *
+ * Added in GRALLOC_MODULE_API_VERSION_0_3.
+ */
+ int (*unlockAsync)(struct gralloc_module_t const* module,
+ buffer_handle_t handle, int* fenceFd);
+
+ /*
+ * The (*lockAsync_ycbcr)() method is like the (*lock_ycbcr)()
+ * method except that the buffer's sync fence object is passed
+ * into the lock call instead of requiring the caller to wait for
+ * completion.
+ *
+ * The gralloc implementation takes ownership of the fenceFd and
+ * is responsible for closing it when no longer needed.
+ *
+ * Added in GRALLOC_MODULE_API_VERSION_0_3.
+ */
+ int (*lockAsync_ycbcr)(struct gralloc_module_t const* module,
+ buffer_handle_t handle, int usage,
+ int l, int t, int w, int h,
+ struct android_ycbcr *ycbcr, int fenceFd);
+
+ /* reserved for future use */
+ void* reserved_proc[3];
+} gralloc_module_t;
+
+/*****************************************************************************/
+
+/**
+ * Every device data structure must begin with hw_device_t
+ * followed by module specific public methods and attributes.
+ */
+
+typedef struct alloc_device_t {
+ struct hw_device_t common;
+
+ /*
+ * (*alloc)() Allocates a buffer in graphic memory with the requested
+ * parameters and returns a buffer_handle_t and the stride in pixels to
+ * allow the implementation to satisfy hardware constraints on the width
+ * of a pixmap (eg: it may have to be multiple of 8 pixels).
+ * The CALLER TAKES OWNERSHIP of the buffer_handle_t.
+ *
+ * If format is HAL_PIXEL_FORMAT_YCbCr_420_888, the returned stride must be
+ * 0, since the actual strides are available from the android_ycbcr
+ * structure.
+ *
+ * Returns 0 on success or -errno on error.
+ */
+
+ int (*alloc)(struct alloc_device_t* dev,
+ int w, int h, int format, int usage,
+ buffer_handle_t* handle, int* stride);
+
+ /*
+ * (*free)() Frees a previously allocated buffer.
+ * Behavior is undefined if the buffer is still mapped in any process,
+ * but shall not result in termination of the program or security breaches
+ * (allowing a process to get access to another process' buffers).
+ * THIS FUNCTION TAKES OWNERSHIP of the buffer_handle_t which becomes
+ * invalid after the call.
+ *
+ * Returns 0 on success or -errno on error.
+ */
+ int (*free)(struct alloc_device_t* dev,
+ buffer_handle_t handle);
+
+ /* This hook is OPTIONAL.
+ *
+ * If non NULL it will be caused by SurfaceFlinger on dumpsys
+ */
+ void (*dump)(struct alloc_device_t *dev, char *buff, int buff_len);
+
+ void* reserved_proc[7];
+} alloc_device_t;
+
+
+/** convenience API for opening and closing a supported device */
+
+static inline int gralloc_open(const struct hw_module_t* module,
+ struct alloc_device_t** device) {
+ return module->methods->open(module,
+ GRALLOC_HARDWARE_GPU0, (struct hw_device_t**)device);
+}
+
+static inline int gralloc_close(struct alloc_device_t* device) {
+ return device->common.close(&device->common);
+}
+
+__END_DECLS
+
+#endif // ANDROID_GRALLOC_INTERFACE_H
diff --git a/include/android/hardware/libhardware/include/hardware/hardware.h b/include/android/hardware/libhardware/include/hardware/hardware.h
new file mode 100644
index 00000000..74f57aa4
--- /dev/null
+++ b/include/android/hardware/libhardware/include/hardware/hardware.h
@@ -0,0 +1,238 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_HARDWARE_HARDWARE_H
+#define ANDROID_INCLUDE_HARDWARE_HARDWARE_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+
+#include <cutils/native_handle.h>
+#include <system/graphics.h>
+
+__BEGIN_DECLS
+
+/*
+ * Value for the hw_module_t.tag field
+ */
+
+#define MAKE_TAG_CONSTANT(A,B,C,D) (((A) << 24) | ((B) << 16) | ((C) << 8) | (D))
+
+#define HARDWARE_MODULE_TAG MAKE_TAG_CONSTANT('H', 'W', 'M', 'T')
+#define HARDWARE_DEVICE_TAG MAKE_TAG_CONSTANT('H', 'W', 'D', 'T')
+
+#define HARDWARE_MAKE_API_VERSION(maj,min) \
+ ((((maj) & 0xff) << 8) | ((min) & 0xff))
+
+#define HARDWARE_MAKE_API_VERSION_2(maj,min,hdr) \
+ ((((maj) & 0xff) << 24) | (((min) & 0xff) << 16) | ((hdr) & 0xffff))
+#define HARDWARE_API_VERSION_2_MAJ_MIN_MASK 0xffff0000
+#define HARDWARE_API_VERSION_2_HEADER_MASK 0x0000ffff
+
+
+/*
+ * The current HAL API version.
+ *
+ * All module implementations must set the hw_module_t.hal_api_version field
+ * to this value when declaring the module with HAL_MODULE_INFO_SYM.
+ *
+ * Note that previous implementations have always set this field to 0.
+ * Therefore, libhardware HAL API will always consider versions 0.0 and 1.0
+ * to be 100% binary compatible.
+ *
+ */
+#define HARDWARE_HAL_API_VERSION HARDWARE_MAKE_API_VERSION(1, 0)
+
+/*
+ * Helper macros for module implementors.
+ *
+ * The derived modules should provide convenience macros for supported
+ * versions so that implementations can explicitly specify module/device
+ * versions at definition time.
+ *
+ * Use this macro to set the hw_module_t.module_api_version field.
+ */
+#define HARDWARE_MODULE_API_VERSION(maj,min) HARDWARE_MAKE_API_VERSION(maj,min)
+#define HARDWARE_MODULE_API_VERSION_2(maj,min,hdr) HARDWARE_MAKE_API_VERSION_2(maj,min,hdr)
+
+/*
+ * Use this macro to set the hw_device_t.version field
+ */
+#define HARDWARE_DEVICE_API_VERSION(maj,min) HARDWARE_MAKE_API_VERSION(maj,min)
+#define HARDWARE_DEVICE_API_VERSION_2(maj,min,hdr) HARDWARE_MAKE_API_VERSION_2(maj,min,hdr)
+
+struct hw_module_t;
+struct hw_module_methods_t;
+struct hw_device_t;
+
+/**
+ * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
+ * and the fields of this data structure must begin with hw_module_t
+ * followed by module specific information.
+ */
+typedef struct hw_module_t {
+ /** tag must be initialized to HARDWARE_MODULE_TAG */
+ uint32_t tag;
+
+ /**
+ * The API version of the implemented module. The module owner is
+ * responsible for updating the version when a module interface has
+ * changed.
+ *
+ * The derived modules such as gralloc and audio own and manage this field.
+ * The module user must interpret the version field to decide whether or
+ * not to inter-operate with the supplied module implementation.
+ * For example, SurfaceFlinger is responsible for making sure that
+ * it knows how to manage different versions of the gralloc-module API,
+ * and AudioFlinger must know how to do the same for audio-module API.
+ *
+ * The module API version should include a major and a minor component.
+ * For example, version 1.0 could be represented as 0x0100. This format
+ * implies that versions 0x0100-0x01ff are all API-compatible.
+ *
+ * In the future, libhardware will expose a hw_get_module_version()
+ * (or equivalent) function that will take minimum/maximum supported
+ * versions as arguments and would be able to reject modules with
+ * versions outside of the supplied range.
+ */
+ uint16_t module_api_version;
+#define version_major module_api_version
+ /**
+ * version_major/version_minor defines are supplied here for temporary
+ * source code compatibility. They will be removed in the next version.
+ * ALL clients must convert to the new version format.
+ */
+
+ /**
+ * The API version of the HAL module interface. This is meant to
+ * version the hw_module_t, hw_module_methods_t, and hw_device_t
+ * structures and definitions.
+ *
+ * The HAL interface owns this field. Module users/implementations
+ * must NOT rely on this value for version information.
+ *
+ * Presently, 0 is the only valid value.
+ */
+ uint16_t hal_api_version;
+#define version_minor hal_api_version
+
+ /** Identifier of module */
+ const char *id;
+
+ /** Name of this module */
+ const char *name;
+
+ /** Author/owner/implementor of the module */
+ const char *author;
+
+ /** Modules methods */
+ struct hw_module_methods_t* methods;
+
+ /** module's dso */
+ void* dso;
+
+#ifdef __LP64__
+ uint64_t reserved[32-7];
+#else
+ /** padding to 128 bytes, reserved for future use */
+ uint32_t reserved[32-7];
+#endif
+
+} hw_module_t;
+
+typedef struct hw_module_methods_t {
+ /** Open a specific device */
+ int (*open)(const struct hw_module_t* module, const char* id,
+ struct hw_device_t** device);
+
+} hw_module_methods_t;
+
+/**
+ * Every device data structure must begin with hw_device_t
+ * followed by module specific public methods and attributes.
+ */
+typedef struct hw_device_t {
+ /** tag must be initialized to HARDWARE_DEVICE_TAG */
+ uint32_t tag;
+
+ /**
+ * Version of the module-specific device API. This value is used by
+ * the derived-module user to manage different device implementations.
+ *
+ * The module user is responsible for checking the module_api_version
+ * and device version fields to ensure that the user is capable of
+ * communicating with the specific module implementation.
+ *
+ * One module can support multiple devices with different versions. This
+ * can be useful when a device interface changes in an incompatible way
+ * but it is still necessary to support older implementations at the same
+ * time. One such example is the Camera 2.0 API.
+ *
+ * This field is interpreted by the module user and is ignored by the
+ * HAL interface itself.
+ */
+ uint32_t version;
+
+ /** reference to the module this device belongs to */
+ struct hw_module_t* module;
+
+ /** padding reserved for future use */
+#ifdef __LP64__
+ uint64_t reserved[12];
+#else
+ uint32_t reserved[12];
+#endif
+
+ /** Close this device */
+ int (*close)(struct hw_device_t* device);
+
+} hw_device_t;
+
+/**
+ * Name of the hal_module_info
+ */
+#define HAL_MODULE_INFO_SYM HMI
+
+/**
+ * Name of the hal_module_info as a string
+ */
+#define HAL_MODULE_INFO_SYM_AS_STR "HMI"
+
+/**
+ * Get the module info associated with a module by id.
+ *
+ * @return: 0 == success, <0 == error and *module == NULL
+ */
+int hw_get_module(const char *id, const struct hw_module_t **module);
+
+/**
+ * Get the module info associated with a module instance by class 'class_id'
+ * and instance 'inst'.
+ *
+ * Some modules types necessitate multiple instances. For example audio supports
+ * multiple concurrent interfaces and thus 'audio' is the module class
+ * and 'primary' or 'a2dp' are module interfaces. This implies that the files
+ * providing these modules would be named audio.primary.<variant>.so and
+ * audio.a2dp.<variant>.so
+ *
+ * @return: 0 == success, <0 == error and *module == NULL
+ */
+int hw_get_module_by_class(const char *class_id, const char *inst,
+ const struct hw_module_t **module);
+
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_HARDWARE_HARDWARE_H */
diff --git a/include/android/meson.build b/include/android/meson.build
new file mode 100644
index 00000000..69f1c38e
--- /dev/null
+++ b/include/android/meson.build
@@ -0,0 +1,5 @@
+android_includes = ([
+ include_directories('hardware/libhardware/include/'),
+ include_directories('metadata/'),
+ include_directories('system/core/include'),
+])
diff --git a/include/android/metadata/camera_metadata_hidden.h b/include/android/metadata/camera_metadata_hidden.h
new file mode 100644
index 00000000..31f1ad19
--- /dev/null
+++ b/include/android/metadata/camera_metadata_hidden.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2014 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SYSTEM_MEDIA_PRIVATE_INCLUDE_CAMERA_METADATA_HIDDEN_H
+#define SYSTEM_MEDIA_PRIVATE_INCLUDE_CAMERA_METADATA_HIDDEN_H
+
+#include <system/camera_vendor_tags.h>
+
+/**
+ * Error codes returned by vendor tags ops operations. These are intended
+ * to be used by all framework code that uses the return values from the
+ * vendor operations object.
+ */
+#define VENDOR_SECTION_NAME_ERR NULL
+#define VENDOR_TAG_NAME_ERR NULL
+#define VENDOR_TAG_COUNT_ERR (-1)
+#define VENDOR_TAG_TYPE_ERR (-1)
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+/** **These are private functions for use only by the camera framework.** **/
+
+/**
+ * Set the global vendor tag operations object used to define vendor tag
+ * structure when parsing camera metadata with functions defined in
+ * system/media/camera/include/camera_metadata.h.
+ */
+ANDROID_API
+int set_camera_metadata_vendor_ops(const vendor_tag_ops_t *query_ops);
+
+/**
+ * Set the global vendor tag cache operations object used to define vendor tag
+ * structure when parsing camera metadata with functions defined in
+ * system/media/camera/include/camera_metadata.h.
+ */
+ANDROID_API
+int set_camera_metadata_vendor_cache_ops(
+ const struct vendor_tag_cache_ops *query_cache_ops);
+
+/**
+ * Set the vendor id for a particular metadata buffer.
+ */
+ANDROID_API
+void set_camera_metadata_vendor_id(camera_metadata_t *meta,
+ metadata_vendor_id_t id);
+
+/**
+ * Retrieve the vendor id for a particular metadata buffer.
+ */
+ANDROID_API
+metadata_vendor_id_t get_camera_metadata_vendor_id(
+ const camera_metadata_t *meta);
+
+/**
+ * Retrieve the type of a tag. Returns -1 if no such tag is defined.
+ */
+ANDROID_API
+int get_local_camera_metadata_tag_type_vendor_id(uint32_t tag,
+ metadata_vendor_id_t id);
+
+/**
+ * Retrieve the name of a tag. Returns NULL if no such tag is defined.
+ */
+ANDROID_API
+const char *get_local_camera_metadata_tag_name_vendor_id(uint32_t tag,
+ metadata_vendor_id_t id);
+
+/**
+ * Retrieve the name of a tag section. Returns NULL if no such tag is defined.
+ */
+ANDROID_API
+const char *get_local_camera_metadata_section_name_vendor_id(uint32_t tag,
+ metadata_vendor_id_t id);
+
+/**
+ * Retrieve the type of a tag. Returns -1 if no such tag is defined.
+ */
+ANDROID_API
+int get_local_camera_metadata_tag_type_vendor_id(uint32_t tag,
+ metadata_vendor_id_t id);
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* SYSTEM_MEDIA_PRIVATE_INCLUDE_CAMERA_METADATA_HIDDEN_H */
diff --git a/include/android/metadata/system/camera_metadata.h b/include/android/metadata/system/camera_metadata.h
new file mode 100644
index 00000000..46e7ac00
--- /dev/null
+++ b/include/android/metadata/system/camera_metadata.h
@@ -0,0 +1,580 @@
+/*
+ * Copyright (C) 2012 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SYSTEM_MEDIA_INCLUDE_ANDROID_CAMERA_METADATA_H
+#define SYSTEM_MEDIA_INCLUDE_ANDROID_CAMERA_METADATA_H
+
+#include <string.h>
+#include <stdint.h>
+#include <cutils/compiler.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Tag hierarchy and enum definitions for camera_metadata_entry
+ * =============================================================================
+ */
+
+/**
+ * Main enum definitions are in a separate file to make it easy to
+ * maintain
+ */
+#include "camera_metadata_tags.h"
+
+/**
+ * Enum range for each top-level category
+ */
+ANDROID_API
+extern unsigned int camera_metadata_section_bounds[ANDROID_SECTION_COUNT][2];
+ANDROID_API
+extern const char *camera_metadata_section_names[ANDROID_SECTION_COUNT];
+
+/**
+ * Type definitions for camera_metadata_entry
+ * =============================================================================
+ */
+enum {
+ // Unsigned 8-bit integer (uint8_t)
+ TYPE_BYTE = 0,
+ // Signed 32-bit integer (int32_t)
+ TYPE_INT32 = 1,
+ // 32-bit float (float)
+ TYPE_FLOAT = 2,
+ // Signed 64-bit integer (int64_t)
+ TYPE_INT64 = 3,
+ // 64-bit float (double)
+ TYPE_DOUBLE = 4,
+ // A 64-bit fraction (camera_metadata_rational_t)
+ TYPE_RATIONAL = 5,
+ // Number of type fields
+ NUM_TYPES
+};
+
+typedef struct camera_metadata_rational {
+ int32_t numerator;
+ int32_t denominator;
+} camera_metadata_rational_t;
+
+/**
+ * A reference to a metadata entry in a buffer.
+ *
+ * The data union pointers point to the real data in the buffer, and can be
+ * modified in-place if the count does not need to change. The count is the
+ * number of entries in data of the entry's type, not a count of bytes.
+ */
+typedef struct camera_metadata_entry {
+ size_t index;
+ uint32_t tag;
+ uint8_t type;
+ size_t count;
+ union {
+ uint8_t *u8;
+ int32_t *i32;
+ float *f;
+ int64_t *i64;
+ double *d;
+ camera_metadata_rational_t *r;
+ } data;
+} camera_metadata_entry_t;
+
+/**
+ * A read-only reference to a metadata entry in a buffer. Identical to
+ * camera_metadata_entry in layout
+ */
+typedef struct camera_metadata_ro_entry {
+ size_t index;
+ uint32_t tag;
+ uint8_t type;
+ size_t count;
+ union {
+ const uint8_t *u8;
+ const int32_t *i32;
+ const float *f;
+ const int64_t *i64;
+ const double *d;
+ const camera_metadata_rational_t *r;
+ } data;
+} camera_metadata_ro_entry_t;
+
+/**
+ * Size in bytes of each entry type
+ */
+ANDROID_API
+extern const size_t camera_metadata_type_size[NUM_TYPES];
+
+/**
+ * Human-readable name of each entry type
+ */
+ANDROID_API
+extern const char* camera_metadata_type_names[NUM_TYPES];
+
+/**
+ * Main definitions for the metadata entry and array structures
+ * =============================================================================
+ */
+
+/**
+ * A packet of metadata. This is a list of metadata entries, each of which has
+ * an integer tag to identify its meaning, 'type' and 'count' field, and the
+ * data, which contains a 'count' number of entries of type 'type'. The packet
+ * has a fixed capacity for entries and for extra data. A new entry uses up one
+ * entry slot, and possibly some amount of data capacity; the function
+ * calculate_camera_metadata_entry_data_size() provides the amount of data
+ * capacity that would be used up by an entry.
+ *
+ * Entries are not sorted by default, and are not forced to be unique - multiple
+ * entries with the same tag are allowed. The packet will not dynamically resize
+ * when full.
+ *
+ * The packet is contiguous in memory, with size in bytes given by
+ * get_camera_metadata_size(). Therefore, it can be copied safely with memcpy()
+ * to a buffer of sufficient size. The copy_camera_metadata() function is
+ * intended for eliminating unused capacity in the destination packet.
+ */
+struct camera_metadata;
+typedef struct camera_metadata camera_metadata_t;
+
+/**
+ * Functions for manipulating camera metadata
+ * =============================================================================
+ *
+ * NOTE: Unless otherwise specified, functions that return type "int"
+ * return 0 on success, and non-0 value on error.
+ */
+
+/**
+ * Allocate a new camera_metadata structure, with some initial space for entries
+ * and extra data. The entry_capacity is measured in entry counts, and
+ * data_capacity in bytes. The resulting structure is all contiguous in memory,
+ * and can be freed with free_camera_metadata().
+ */
+ANDROID_API
+camera_metadata_t *allocate_camera_metadata(size_t entry_capacity,
+ size_t data_capacity);
+
+/**
+ * Get the required alignment of a packet of camera metadata, which is the
+ * maximal alignment of the embedded camera_metadata, camera_metadata_buffer_entry,
+ * and camera_metadata_data.
+ */
+ANDROID_API
+size_t get_camera_metadata_alignment();
+
+/**
+ * Allocate a new camera_metadata structure of size src_size. Copy the data,
+ * ignoring alignment, and then attempt validation. If validation
+ * fails, free the memory and return NULL. Otherwise return the pointer.
+ *
+ * The resulting pointer can be freed with free_camera_metadata().
+ */
+ANDROID_API
+camera_metadata_t *allocate_copy_camera_metadata_checked(
+ const camera_metadata_t *src,
+ size_t src_size);
+
+/**
+ * Place a camera metadata structure into an existing buffer. Returns NULL if
+ * the buffer is too small for the requested number of reserved entries and
+ * bytes of data. The entry_capacity is measured in entry counts, and
+ * data_capacity in bytes. If the buffer is larger than the required space,
+ * unused space will be left at the end. If successful, returns a pointer to the
+ * metadata header placed at the start of the buffer. It is the caller's
+ * responsibility to free the original buffer; do not call
+ * free_camera_metadata() with the returned pointer.
+ */
+ANDROID_API
+camera_metadata_t *place_camera_metadata(void *dst, size_t dst_size,
+ size_t entry_capacity,
+ size_t data_capacity);
+
+/**
+ * Free a camera_metadata structure. Should only be used with structures
+ * allocated with allocate_camera_metadata().
+ */
+ANDROID_API
+void free_camera_metadata(camera_metadata_t *metadata);
+
+/**
+ * Calculate the buffer size needed for a metadata structure of entry_count
+ * metadata entries, needing a total of data_count bytes of extra data storage.
+ */
+ANDROID_API
+size_t calculate_camera_metadata_size(size_t entry_count,
+ size_t data_count);
+
+/**
+ * Get current size of entire metadata structure in bytes, including reserved
+ * but unused space.
+ */
+ANDROID_API
+size_t get_camera_metadata_size(const camera_metadata_t *metadata);
+
+/**
+ * Get size of entire metadata buffer in bytes, not including reserved but
+ * unused space. This is the amount of space needed by copy_camera_metadata for
+ * its dst buffer.
+ */
+ANDROID_API
+size_t get_camera_metadata_compact_size(const camera_metadata_t *metadata);
+
+/**
+ * Get the current number of entries in the metadata packet.
+ *
+ * metadata packet must be valid, which can be checked before the call with
+ * validate_camera_metadata_structure().
+ */
+ANDROID_API
+size_t get_camera_metadata_entry_count(const camera_metadata_t *metadata);
+
+/**
+ * Get the maximum number of entries that could fit in the metadata packet.
+ */
+ANDROID_API
+size_t get_camera_metadata_entry_capacity(const camera_metadata_t *metadata);
+
+/**
+ * Get the current count of bytes used for value storage in the metadata packet.
+ */
+ANDROID_API
+size_t get_camera_metadata_data_count(const camera_metadata_t *metadata);
+
+/**
+ * Get the maximum count of bytes that could be used for value storage in the
+ * metadata packet.
+ */
+ANDROID_API
+size_t get_camera_metadata_data_capacity(const camera_metadata_t *metadata);
+
+/**
+ * Copy a metadata structure to a memory buffer, compacting it along the
+ * way. That is, in the copied structure, entry_count == entry_capacity, and
+ * data_count == data_capacity.
+ *
+ * If dst_size > get_camera_metadata_compact_size(), the unused bytes are at the
+ * end of the buffer. If dst_size < get_camera_metadata_compact_size(), returns
+ * NULL. Otherwise returns a pointer to the metadata structure header placed at
+ * the start of dst.
+ *
+ * Since the buffer was not allocated by allocate_camera_metadata, the caller is
+ * responsible for freeing the underlying buffer when needed; do not call
+ * free_camera_metadata.
+ */
+ANDROID_API
+camera_metadata_t *copy_camera_metadata(void *dst, size_t dst_size,
+ const camera_metadata_t *src);
+
+
+// Non-zero return values for validate_camera_metadata_structure
+enum {
+ CAMERA_METADATA_VALIDATION_ERROR = 1,
+ CAMERA_METADATA_VALIDATION_SHIFTED = 2,
+};
+
+/**
+ * Validate that a metadata is structurally sane. That is, its internal
+ * state is such that we won't get buffer overflows or run into other
+ * 'impossible' issues when calling the other API functions.
+ *
+ * This is useful in particular after copying the binary metadata blob
+ * from an untrusted source, since passing this check means the data is at least
+ * consistent.
+ *
+ * The expected_size argument is optional.
+ *
+ * Returns 0: on success
+ * CAMERA_METADATA_VALIDATION_ERROR: on error
+ * CAMERA_METADATA_VALIDATION_SHIFTED: when the data is not properly aligned, but can be
+ * used as input of clone_camera_metadata and the returned metadata will be valid.
+ *
+ */
+ANDROID_API
+int validate_camera_metadata_structure(const camera_metadata_t *metadata,
+ const size_t *expected_size);
+
+/**
+ * Append camera metadata in src to an existing metadata structure in dst. This
+ * does not resize the destination structure, so if it is too small, a non-zero
+ * value is returned. On success, 0 is returned. Appending onto a sorted
+ * structure results in a non-sorted combined structure.
+ */
+ANDROID_API
+int append_camera_metadata(camera_metadata_t *dst, const camera_metadata_t *src);
+
+/**
+ * Clone an existing metadata buffer, compacting along the way. This is
+ * equivalent to allocating a new buffer of the minimum needed size, then
+ * appending the buffer to be cloned into the new buffer. The resulting buffer
+ * can be freed with free_camera_metadata(). Returns NULL if cloning failed.
+ */
+ANDROID_API
+camera_metadata_t *clone_camera_metadata(const camera_metadata_t *src);
+
+/**
+ * Calculate the number of bytes of extra data a given metadata entry will take
+ * up. That is, if entry of 'type' with a payload of 'data_count' values is
+ * added, how much will the value returned by get_camera_metadata_data_count()
+ * be increased? This value may be zero, if no extra data storage is needed.
+ */
+ANDROID_API
+size_t calculate_camera_metadata_entry_data_size(uint8_t type,
+ size_t data_count);
+
+/**
+ * Add a metadata entry to a metadata structure. Returns 0 if the addition
+ * succeeded. Returns a non-zero value if there is insufficient reserved space
+ * left to add the entry, or if the tag is unknown. data_count is the number of
+ * entries in the data array of the tag's type, not a count of
+ * bytes. Vendor-defined tags can not be added using this method, unless
+ * set_vendor_tag_query_ops() has been called first. Entries are always added to
+ * the end of the structure (highest index), so after addition, a
+ * previously-sorted array will be marked as unsorted.
+ *
+ * Returns 0 on success. A non-0 value is returned on error.
+ */
+ANDROID_API
+int add_camera_metadata_entry(camera_metadata_t *dst,
+ uint32_t tag,
+ const void *data,
+ size_t data_count);
+
+/**
+ * Sort the metadata buffer for fast searching. If already marked as sorted,
+ * does nothing. Adding or appending entries to the buffer will place the buffer
+ * back into an unsorted state.
+ *
+ * Returns 0 on success. A non-0 value is returned on error.
+ */
+ANDROID_API
+int sort_camera_metadata(camera_metadata_t *dst);
+
+/**
+ * Get metadata entry at position index in the metadata buffer.
+ * Index must be less than entry count, which is returned by
+ * get_camera_metadata_entry_count().
+ *
+ * src and index are inputs; the passed-in entry is updated with the details of
+ * the entry. The data pointer points to the real data in the buffer, and can be
+ * updated as long as the data count does not change.
+ *
+ * Returns 0 on success. A non-0 value is returned on error.
+ */
+ANDROID_API
+int get_camera_metadata_entry(camera_metadata_t *src,
+ size_t index,
+ camera_metadata_entry_t *entry);
+
+/**
+ * Get metadata entry at position index, but disallow editing the data.
+ */
+ANDROID_API
+int get_camera_metadata_ro_entry(const camera_metadata_t *src,
+ size_t index,
+ camera_metadata_ro_entry_t *entry);
+
+/**
+ * Find an entry with given tag value. If not found, returns -ENOENT. Otherwise,
+ * returns entry contents like get_camera_metadata_entry.
+ *
+ * If multiple entries with the same tag exist, does not have any guarantees on
+ * which is returned. To speed up searching for tags, sort the metadata
+ * structure first by calling sort_camera_metadata().
+ */
+ANDROID_API
+int find_camera_metadata_entry(camera_metadata_t *src,
+ uint32_t tag,
+ camera_metadata_entry_t *entry);
+
+/**
+ * Find an entry with given tag value, but disallow editing the data
+ */
+ANDROID_API
+int find_camera_metadata_ro_entry(const camera_metadata_t *src,
+ uint32_t tag,
+ camera_metadata_ro_entry_t *entry);
+
+/**
+ * Delete an entry at given index. This is an expensive operation, since it
+ * requires repacking entries and possibly entry data. This also invalidates any
+ * existing camera_metadata_entry.data pointers to this buffer. Sorting is
+ * maintained.
+ */
+ANDROID_API
+int delete_camera_metadata_entry(camera_metadata_t *dst,
+ size_t index);
+
+/**
+ * Updates a metadata entry with new data. If the data size is changing, may
+ * need to adjust the data array, making this an O(N) operation. If the data
+ * size is the same or still fits in the entry space, this is O(1). Maintains
+ * sorting, but invalidates camera_metadata_entry instances that point to the
+ * updated entry. If a non-NULL value is passed in to entry, the entry structure
+ * is updated to match the new buffer state. Returns a non-zero value if there
+ * is no room for the new data in the buffer.
+ */
+ANDROID_API
+int update_camera_metadata_entry(camera_metadata_t *dst,
+ size_t index,
+ const void *data,
+ size_t data_count,
+ camera_metadata_entry_t *updated_entry);
+
+/**
+ * Retrieve human-readable name of section the tag is in. Returns NULL if
+ * no such tag is defined. Returns NULL for tags in the vendor section, unless
+ * set_vendor_tag_query_ops() has been used.
+ */
+ANDROID_API
+const char *get_camera_metadata_section_name(uint32_t tag);
+
+/**
+ * Retrieve human-readable name of tag (not including section). Returns NULL if
+ * no such tag is defined. Returns NULL for tags in the vendor section, unless
+ * set_vendor_tag_query_ops() has been used.
+ */
+ANDROID_API
+const char *get_camera_metadata_tag_name(uint32_t tag);
+
+/**
+ * Retrieve the type of a tag. Returns -1 if no such tag is defined. Returns -1
+ * for tags in the vendor section, unless set_vendor_tag_query_ops() has been
+ * used.
+ */
+ANDROID_API
+int get_camera_metadata_tag_type(uint32_t tag);
+
+/**
+ * Retrieve human-readable name of section the tag is in. Returns NULL if
+ * no such tag is defined.
+ */
+ANDROID_API
+const char *get_local_camera_metadata_section_name(uint32_t tag,
+ const camera_metadata_t *meta);
+
+/**
+ * Retrieve human-readable name of tag (not including section). Returns NULL if
+ * no such tag is defined.
+ */
+ANDROID_API
+const char *get_local_camera_metadata_tag_name(uint32_t tag,
+ const camera_metadata_t *meta);
+
+/**
+ * Retrieve the type of a tag. Returns -1 if no such tag is defined.
+ */
+ANDROID_API
+int get_local_camera_metadata_tag_type(uint32_t tag,
+ const camera_metadata_t *meta);
+
+/**
+ * Set up vendor-specific tag query methods. These are needed to properly add
+ * entries with vendor-specified tags and to use the
+ * get_camera_metadata_section_name, _tag_name, and _tag_type methods with
+ * vendor tags. Returns 0 on success.
+ *
+ * **DEPRECATED** - Please use vendor_tag_ops defined in camera_vendor_tags.h
+ * instead.
+ */
+typedef struct vendor_tag_query_ops vendor_tag_query_ops_t;
+struct vendor_tag_query_ops {
+ /**
+ * Get vendor section name for a vendor-specified entry tag. Only called for
+ * tags >= 0x80000000. The section name must start with the name of the
+ * vendor in the Java package style. For example, CameraZoom inc must prefix
+ * their sections with "com.camerazoom." Must return NULL if the tag is
+ * outside the bounds of vendor-defined sections.
+ */
+ const char *(*get_camera_vendor_section_name)(
+ const vendor_tag_query_ops_t *v,
+ uint32_t tag);
+ /**
+ * Get tag name for a vendor-specified entry tag. Only called for tags >=
+ * 0x80000000. Must return NULL if the tag is outside the bounds of
+ * vendor-defined sections.
+ */
+ const char *(*get_camera_vendor_tag_name)(
+ const vendor_tag_query_ops_t *v,
+ uint32_t tag);
+ /**
+ * Get tag type for a vendor-specified entry tag. Only called for tags >=
+ * 0x80000000. Must return -1 if the tag is outside the bounds of
+ * vendor-defined sections.
+ */
+ int (*get_camera_vendor_tag_type)(
+ const vendor_tag_query_ops_t *v,
+ uint32_t tag);
+ /**
+ * Get the number of vendor tags supported on this platform. Used to
+ * calculate the size of buffer needed for holding the array of all tags
+ * returned by get_camera_vendor_tags().
+ */
+ int (*get_camera_vendor_tag_count)(
+ const vendor_tag_query_ops_t *v);
+ /**
+ * Fill an array with all the supported vendor tags on this platform.
+ * get_camera_vendor_tag_count() returns the number of tags supported, and
+ * tag_array should be allocated with enough space to hold all of the tags.
+ */
+ void (*get_camera_vendor_tags)(
+ const vendor_tag_query_ops_t *v,
+ uint32_t *tag_array);
+};
+
+/**
+ * **DEPRECATED** - This should only be used by the camera framework. Camera
+ * metadata will transition to using vendor_tag_ops defined in
+ * camera_vendor_tags.h instead.
+ */
+ANDROID_API
+int set_camera_metadata_vendor_tag_ops(const vendor_tag_query_ops_t *query_ops);
+
+/**
+ * Print fields in the metadata to the log.
+ * verbosity = 0: Only tag entry information
+ * verbosity = 1: Tag entry information plus at most 16 data values
+ * verbosity = 2: All information
+ */
+ANDROID_API
+void dump_camera_metadata(const camera_metadata_t *metadata,
+ int fd,
+ int verbosity);
+
+/**
+ * Print fields in the metadata to the log; adds indentation parameter, which
+ * specifies the number of spaces to insert before each line of the dump
+ */
+ANDROID_API
+void dump_indented_camera_metadata(const camera_metadata_t *metadata,
+ int fd,
+ int verbosity,
+ int indentation);
+
+/**
+ * Prints the specified tag value as a string. Only works for enum tags.
+ * Returns 0 on success, -1 on failure.
+ */
+ANDROID_API
+int camera_metadata_enum_snprint(uint32_t tag,
+ uint32_t value,
+ char *dst,
+ size_t size);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/include/android/metadata/system/camera_metadata_tags.h b/include/android/metadata/system/camera_metadata_tags.h
new file mode 100644
index 00000000..adf18b8f
--- /dev/null
+++ b/include/android/metadata/system/camera_metadata_tags.h
@@ -0,0 +1,1005 @@
+/*
+ * Copyright (C) 2012 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * !! Do not include this file directly !!
+ *
+ * Include camera_metadata.h instead.
+ */
+
+/**
+ * ! Do not edit this file directly !
+ *
+ * Generated automatically from camera_metadata_tags.mako
+ */
+
+/** TODO: Nearly every enum in this file needs a description */
+
+/**
+ * Top level hierarchy definitions for camera metadata. *_INFO sections are for
+ * the static metadata that can be retrived without opening the camera device.
+ * New sections must be added right before ANDROID_SECTION_COUNT to maintain
+ * existing enumerations.
+ */
+typedef enum camera_metadata_section {
+ ANDROID_COLOR_CORRECTION,
+ ANDROID_CONTROL,
+ ANDROID_DEMOSAIC,
+ ANDROID_EDGE,
+ ANDROID_FLASH,
+ ANDROID_FLASH_INFO,
+ ANDROID_HOT_PIXEL,
+ ANDROID_JPEG,
+ ANDROID_LENS,
+ ANDROID_LENS_INFO,
+ ANDROID_NOISE_REDUCTION,
+ ANDROID_QUIRKS,
+ ANDROID_REQUEST,
+ ANDROID_SCALER,
+ ANDROID_SENSOR,
+ ANDROID_SENSOR_INFO,
+ ANDROID_SHADING,
+ ANDROID_STATISTICS,
+ ANDROID_STATISTICS_INFO,
+ ANDROID_TONEMAP,
+ ANDROID_LED,
+ ANDROID_INFO,
+ ANDROID_BLACK_LEVEL,
+ ANDROID_SYNC,
+ ANDROID_REPROCESS,
+ ANDROID_DEPTH,
+ ANDROID_LOGICAL_MULTI_CAMERA,
+ ANDROID_DISTORTION_CORRECTION,
+ ANDROID_SECTION_COUNT,
+
+ VENDOR_SECTION = 0x8000
+} camera_metadata_section_t;
+
+/**
+ * Hierarchy positions in enum space. All vendor extension tags must be
+ * defined with tag >= VENDOR_SECTION_START
+ */
+typedef enum camera_metadata_section_start {
+ ANDROID_COLOR_CORRECTION_START = ANDROID_COLOR_CORRECTION << 16,
+ ANDROID_CONTROL_START = ANDROID_CONTROL << 16,
+ ANDROID_DEMOSAIC_START = ANDROID_DEMOSAIC << 16,
+ ANDROID_EDGE_START = ANDROID_EDGE << 16,
+ ANDROID_FLASH_START = ANDROID_FLASH << 16,
+ ANDROID_FLASH_INFO_START = ANDROID_FLASH_INFO << 16,
+ ANDROID_HOT_PIXEL_START = ANDROID_HOT_PIXEL << 16,
+ ANDROID_JPEG_START = ANDROID_JPEG << 16,
+ ANDROID_LENS_START = ANDROID_LENS << 16,
+ ANDROID_LENS_INFO_START = ANDROID_LENS_INFO << 16,
+ ANDROID_NOISE_REDUCTION_START = ANDROID_NOISE_REDUCTION << 16,
+ ANDROID_QUIRKS_START = ANDROID_QUIRKS << 16,
+ ANDROID_REQUEST_START = ANDROID_REQUEST << 16,
+ ANDROID_SCALER_START = ANDROID_SCALER << 16,
+ ANDROID_SENSOR_START = ANDROID_SENSOR << 16,
+ ANDROID_SENSOR_INFO_START = ANDROID_SENSOR_INFO << 16,
+ ANDROID_SHADING_START = ANDROID_SHADING << 16,
+ ANDROID_STATISTICS_START = ANDROID_STATISTICS << 16,
+ ANDROID_STATISTICS_INFO_START = ANDROID_STATISTICS_INFO << 16,
+ ANDROID_TONEMAP_START = ANDROID_TONEMAP << 16,
+ ANDROID_LED_START = ANDROID_LED << 16,
+ ANDROID_INFO_START = ANDROID_INFO << 16,
+ ANDROID_BLACK_LEVEL_START = ANDROID_BLACK_LEVEL << 16,
+ ANDROID_SYNC_START = ANDROID_SYNC << 16,
+ ANDROID_REPROCESS_START = ANDROID_REPROCESS << 16,
+ ANDROID_DEPTH_START = ANDROID_DEPTH << 16,
+ ANDROID_LOGICAL_MULTI_CAMERA_START
+ = ANDROID_LOGICAL_MULTI_CAMERA
+ << 16,
+ ANDROID_DISTORTION_CORRECTION_START
+ = ANDROID_DISTORTION_CORRECTION
+ << 16,
+ VENDOR_SECTION_START = VENDOR_SECTION << 16
+} camera_metadata_section_start_t;
+
+/**
+ * Main enum for defining camera metadata tags. New entries must always go
+ * before the section _END tag to preserve existing enumeration values. In
+ * addition, the name and type of the tag needs to be added to
+ * system/media/camera/src/camera_metadata_tag_info.c
+ */
+typedef enum camera_metadata_tag {
+ ANDROID_COLOR_CORRECTION_MODE = // enum | public | HIDL v3.2
+ ANDROID_COLOR_CORRECTION_START,
+ ANDROID_COLOR_CORRECTION_TRANSFORM, // rational[] | public | HIDL v3.2
+ ANDROID_COLOR_CORRECTION_GAINS, // float[] | public | HIDL v3.2
+ ANDROID_COLOR_CORRECTION_ABERRATION_MODE, // enum | public | HIDL v3.2
+ ANDROID_COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES,
+ // byte[] | public | HIDL v3.2
+ ANDROID_COLOR_CORRECTION_END,
+
+ ANDROID_CONTROL_AE_ANTIBANDING_MODE = // enum | public | HIDL v3.2
+ ANDROID_CONTROL_START,
+ ANDROID_CONTROL_AE_EXPOSURE_COMPENSATION, // int32 | public | HIDL v3.2
+ ANDROID_CONTROL_AE_LOCK, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_AE_MODE, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_AE_REGIONS, // int32[] | public | HIDL v3.2
+ ANDROID_CONTROL_AE_TARGET_FPS_RANGE, // int32[] | public | HIDL v3.2
+ ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_AF_MODE, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_AF_REGIONS, // int32[] | public | HIDL v3.2
+ ANDROID_CONTROL_AF_TRIGGER, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_AWB_LOCK, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_AWB_MODE, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_AWB_REGIONS, // int32[] | public | HIDL v3.2
+ ANDROID_CONTROL_CAPTURE_INTENT, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_EFFECT_MODE, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_MODE, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_VIDEO_STABILIZATION_MODE, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_AE_AVAILABLE_ANTIBANDING_MODES, // byte[] | public | HIDL v3.2
+ ANDROID_CONTROL_AE_AVAILABLE_MODES, // byte[] | public | HIDL v3.2
+ ANDROID_CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES, // int32[] | public | HIDL v3.2
+ ANDROID_CONTROL_AE_COMPENSATION_RANGE, // int32[] | public | HIDL v3.2
+ ANDROID_CONTROL_AE_COMPENSATION_STEP, // rational | public | HIDL v3.2
+ ANDROID_CONTROL_AF_AVAILABLE_MODES, // byte[] | public | HIDL v3.2
+ ANDROID_CONTROL_AVAILABLE_EFFECTS, // byte[] | public | HIDL v3.2
+ ANDROID_CONTROL_AVAILABLE_SCENE_MODES, // byte[] | public | HIDL v3.2
+ ANDROID_CONTROL_AVAILABLE_VIDEO_STABILIZATION_MODES,
+ // byte[] | public | HIDL v3.2
+ ANDROID_CONTROL_AWB_AVAILABLE_MODES, // byte[] | public | HIDL v3.2
+ ANDROID_CONTROL_MAX_REGIONS, // int32[] | ndk_public | HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_OVERRIDES, // byte[] | system | HIDL v3.2
+ ANDROID_CONTROL_AE_PRECAPTURE_ID, // int32 | system | HIDL v3.2
+ ANDROID_CONTROL_AE_STATE, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_AF_STATE, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_AF_TRIGGER_ID, // int32 | system | HIDL v3.2
+ ANDROID_CONTROL_AWB_STATE, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_AVAILABLE_HIGH_SPEED_VIDEO_CONFIGURATIONS,
+ // int32[] | hidden | HIDL v3.2
+ ANDROID_CONTROL_AE_LOCK_AVAILABLE, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_AWB_LOCK_AVAILABLE, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_AVAILABLE_MODES, // byte[] | public | HIDL v3.2
+ ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST_RANGE, // int32[] | public | HIDL v3.2
+ ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST, // int32 | public | HIDL v3.2
+ ANDROID_CONTROL_ENABLE_ZSL, // enum | public | HIDL v3.2
+ ANDROID_CONTROL_AF_SCENE_CHANGE, // enum | public | HIDL v3.3
+ ANDROID_CONTROL_END,
+
+ ANDROID_DEMOSAIC_MODE = // enum | system | HIDL v3.2
+ ANDROID_DEMOSAIC_START,
+ ANDROID_DEMOSAIC_END,
+
+ ANDROID_EDGE_MODE = // enum | public | HIDL v3.2
+ ANDROID_EDGE_START,
+ ANDROID_EDGE_STRENGTH, // byte | system | HIDL v3.2
+ ANDROID_EDGE_AVAILABLE_EDGE_MODES, // byte[] | public | HIDL v3.2
+ ANDROID_EDGE_END,
+
+ ANDROID_FLASH_FIRING_POWER = // byte | system | HIDL v3.2
+ ANDROID_FLASH_START,
+ ANDROID_FLASH_FIRING_TIME, // int64 | system | HIDL v3.2
+ ANDROID_FLASH_MODE, // enum | public | HIDL v3.2
+ ANDROID_FLASH_COLOR_TEMPERATURE, // byte | system | HIDL v3.2
+ ANDROID_FLASH_MAX_ENERGY, // byte | system | HIDL v3.2
+ ANDROID_FLASH_STATE, // enum | public | HIDL v3.2
+ ANDROID_FLASH_END,
+
+ ANDROID_FLASH_INFO_AVAILABLE = // enum | public | HIDL v3.2
+ ANDROID_FLASH_INFO_START,
+ ANDROID_FLASH_INFO_CHARGE_DURATION, // int64 | system | HIDL v3.2
+ ANDROID_FLASH_INFO_END,
+
+ ANDROID_HOT_PIXEL_MODE = // enum | public | HIDL v3.2
+ ANDROID_HOT_PIXEL_START,
+ ANDROID_HOT_PIXEL_AVAILABLE_HOT_PIXEL_MODES, // byte[] | public | HIDL v3.2
+ ANDROID_HOT_PIXEL_END,
+
+ ANDROID_JPEG_GPS_COORDINATES = // double[] | ndk_public | HIDL v3.2
+ ANDROID_JPEG_START,
+ ANDROID_JPEG_GPS_PROCESSING_METHOD, // byte | ndk_public | HIDL v3.2
+ ANDROID_JPEG_GPS_TIMESTAMP, // int64 | ndk_public | HIDL v3.2
+ ANDROID_JPEG_ORIENTATION, // int32 | public | HIDL v3.2
+ ANDROID_JPEG_QUALITY, // byte | public | HIDL v3.2
+ ANDROID_JPEG_THUMBNAIL_QUALITY, // byte | public | HIDL v3.2
+ ANDROID_JPEG_THUMBNAIL_SIZE, // int32[] | public | HIDL v3.2
+ ANDROID_JPEG_AVAILABLE_THUMBNAIL_SIZES, // int32[] | public | HIDL v3.2
+ ANDROID_JPEG_MAX_SIZE, // int32 | system | HIDL v3.2
+ ANDROID_JPEG_SIZE, // int32 | system | HIDL v3.2
+ ANDROID_JPEG_END,
+
+ ANDROID_LENS_APERTURE = // float | public | HIDL v3.2
+ ANDROID_LENS_START,
+ ANDROID_LENS_FILTER_DENSITY, // float | public | HIDL v3.2
+ ANDROID_LENS_FOCAL_LENGTH, // float | public | HIDL v3.2
+ ANDROID_LENS_FOCUS_DISTANCE, // float | public | HIDL v3.2
+ ANDROID_LENS_OPTICAL_STABILIZATION_MODE, // enum | public | HIDL v3.2
+ ANDROID_LENS_FACING, // enum | public | HIDL v3.2
+ ANDROID_LENS_POSE_ROTATION, // float[] | public | HIDL v3.2
+ ANDROID_LENS_POSE_TRANSLATION, // float[] | public | HIDL v3.2
+ ANDROID_LENS_FOCUS_RANGE, // float[] | public | HIDL v3.2
+ ANDROID_LENS_STATE, // enum | public | HIDL v3.2
+ ANDROID_LENS_INTRINSIC_CALIBRATION, // float[] | public | HIDL v3.2
+ ANDROID_LENS_RADIAL_DISTORTION, // float[] | public | HIDL v3.2
+ ANDROID_LENS_POSE_REFERENCE, // enum | public | HIDL v3.3
+ ANDROID_LENS_DISTORTION, // float[] | public | HIDL v3.3
+ ANDROID_LENS_END,
+
+ ANDROID_LENS_INFO_AVAILABLE_APERTURES = // float[] | public | HIDL v3.2
+ ANDROID_LENS_INFO_START,
+ ANDROID_LENS_INFO_AVAILABLE_FILTER_DENSITIES, // float[] | public | HIDL v3.2
+ ANDROID_LENS_INFO_AVAILABLE_FOCAL_LENGTHS, // float[] | public | HIDL v3.2
+ ANDROID_LENS_INFO_AVAILABLE_OPTICAL_STABILIZATION,// byte[] | public | HIDL v3.2
+ ANDROID_LENS_INFO_HYPERFOCAL_DISTANCE, // float | public | HIDL v3.2
+ ANDROID_LENS_INFO_MINIMUM_FOCUS_DISTANCE, // float | public | HIDL v3.2
+ ANDROID_LENS_INFO_SHADING_MAP_SIZE, // int32[] | ndk_public | HIDL v3.2
+ ANDROID_LENS_INFO_FOCUS_DISTANCE_CALIBRATION, // enum | public | HIDL v3.2
+ ANDROID_LENS_INFO_END,
+
+ ANDROID_NOISE_REDUCTION_MODE = // enum | public | HIDL v3.2
+ ANDROID_NOISE_REDUCTION_START,
+ ANDROID_NOISE_REDUCTION_STRENGTH, // byte | system | HIDL v3.2
+ ANDROID_NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES,
+ // byte[] | public | HIDL v3.2
+ ANDROID_NOISE_REDUCTION_END,
+
+ ANDROID_QUIRKS_METERING_CROP_REGION = // byte | system | HIDL v3.2
+ ANDROID_QUIRKS_START,
+ ANDROID_QUIRKS_TRIGGER_AF_WITH_AUTO, // byte | system | HIDL v3.2
+ ANDROID_QUIRKS_USE_ZSL_FORMAT, // byte | system | HIDL v3.2
+ ANDROID_QUIRKS_USE_PARTIAL_RESULT, // byte | hidden | HIDL v3.2
+ ANDROID_QUIRKS_PARTIAL_RESULT, // enum | hidden | HIDL v3.2
+ ANDROID_QUIRKS_END,
+
+ ANDROID_REQUEST_FRAME_COUNT = // int32 | hidden | HIDL v3.2
+ ANDROID_REQUEST_START,
+ ANDROID_REQUEST_ID, // int32 | hidden | HIDL v3.2
+ ANDROID_REQUEST_INPUT_STREAMS, // int32[] | system | HIDL v3.2
+ ANDROID_REQUEST_METADATA_MODE, // enum | system | HIDL v3.2
+ ANDROID_REQUEST_OUTPUT_STREAMS, // int32[] | system | HIDL v3.2
+ ANDROID_REQUEST_TYPE, // enum | system | HIDL v3.2
+ ANDROID_REQUEST_MAX_NUM_OUTPUT_STREAMS, // int32[] | ndk_public | HIDL v3.2
+ ANDROID_REQUEST_MAX_NUM_REPROCESS_STREAMS, // int32[] | system | HIDL v3.2
+ ANDROID_REQUEST_MAX_NUM_INPUT_STREAMS, // int32 | java_public | HIDL v3.2
+ ANDROID_REQUEST_PIPELINE_DEPTH, // byte | public | HIDL v3.2
+ ANDROID_REQUEST_PIPELINE_MAX_DEPTH, // byte | public | HIDL v3.2
+ ANDROID_REQUEST_PARTIAL_RESULT_COUNT, // int32 | public | HIDL v3.2
+ ANDROID_REQUEST_AVAILABLE_CAPABILITIES, // enum[] | public | HIDL v3.2
+ ANDROID_REQUEST_AVAILABLE_REQUEST_KEYS, // int32[] | ndk_public | HIDL v3.2
+ ANDROID_REQUEST_AVAILABLE_RESULT_KEYS, // int32[] | ndk_public | HIDL v3.2
+ ANDROID_REQUEST_AVAILABLE_CHARACTERISTICS_KEYS, // int32[] | ndk_public | HIDL v3.2
+ ANDROID_REQUEST_AVAILABLE_SESSION_KEYS, // int32[] | ndk_public | HIDL v3.3
+ ANDROID_REQUEST_AVAILABLE_PHYSICAL_CAMERA_REQUEST_KEYS,
+ // int32[] | hidden | HIDL v3.3
+ ANDROID_REQUEST_END,
+
+ ANDROID_SCALER_CROP_REGION = // int32[] | public | HIDL v3.2
+ ANDROID_SCALER_START,
+ ANDROID_SCALER_AVAILABLE_FORMATS, // enum[] | hidden | HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_JPEG_MIN_DURATIONS, // int64[] | hidden | HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_JPEG_SIZES, // int32[] | hidden | HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_MAX_DIGITAL_ZOOM, // float | public | HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_PROCESSED_MIN_DURATIONS, // int64[] | hidden | HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_PROCESSED_SIZES, // int32[] | hidden | HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_RAW_MIN_DURATIONS, // int64[] | system | HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_RAW_SIZES, // int32[] | system | HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_INPUT_OUTPUT_FORMATS_MAP,// int32 | hidden | HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS, // enum[] | ndk_public | HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_MIN_FRAME_DURATIONS, // int64[] | ndk_public | HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_STALL_DURATIONS, // int64[] | ndk_public | HIDL v3.2
+ ANDROID_SCALER_CROPPING_TYPE, // enum | public | HIDL v3.2
+ ANDROID_SCALER_END,
+
+ ANDROID_SENSOR_EXPOSURE_TIME = // int64 | public | HIDL v3.2
+ ANDROID_SENSOR_START,
+ ANDROID_SENSOR_FRAME_DURATION, // int64 | public | HIDL v3.2
+ ANDROID_SENSOR_SENSITIVITY, // int32 | public | HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1, // enum | public | HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT2, // byte | public | HIDL v3.2
+ ANDROID_SENSOR_CALIBRATION_TRANSFORM1, // rational[] | public | HIDL v3.2
+ ANDROID_SENSOR_CALIBRATION_TRANSFORM2, // rational[] | public | HIDL v3.2
+ ANDROID_SENSOR_COLOR_TRANSFORM1, // rational[] | public | HIDL v3.2
+ ANDROID_SENSOR_COLOR_TRANSFORM2, // rational[] | public | HIDL v3.2
+ ANDROID_SENSOR_FORWARD_MATRIX1, // rational[] | public | HIDL v3.2
+ ANDROID_SENSOR_FORWARD_MATRIX2, // rational[] | public | HIDL v3.2
+ ANDROID_SENSOR_BASE_GAIN_FACTOR, // rational | system | HIDL v3.2
+ ANDROID_SENSOR_BLACK_LEVEL_PATTERN, // int32[] | public | HIDL v3.2
+ ANDROID_SENSOR_MAX_ANALOG_SENSITIVITY, // int32 | public | HIDL v3.2
+ ANDROID_SENSOR_ORIENTATION, // int32 | public | HIDL v3.2
+ ANDROID_SENSOR_PROFILE_HUE_SAT_MAP_DIMENSIONS, // int32[] | system | HIDL v3.2
+ ANDROID_SENSOR_TIMESTAMP, // int64 | public | HIDL v3.2
+ ANDROID_SENSOR_TEMPERATURE, // float | system | HIDL v3.2
+ ANDROID_SENSOR_NEUTRAL_COLOR_POINT, // rational[] | public | HIDL v3.2
+ ANDROID_SENSOR_NOISE_PROFILE, // double[] | public | HIDL v3.2
+ ANDROID_SENSOR_PROFILE_HUE_SAT_MAP, // float[] | system | HIDL v3.2
+ ANDROID_SENSOR_PROFILE_TONE_CURVE, // float[] | system | HIDL v3.2
+ ANDROID_SENSOR_GREEN_SPLIT, // float | public | HIDL v3.2
+ ANDROID_SENSOR_TEST_PATTERN_DATA, // int32[] | public | HIDL v3.2
+ ANDROID_SENSOR_TEST_PATTERN_MODE, // enum | public | HIDL v3.2
+ ANDROID_SENSOR_AVAILABLE_TEST_PATTERN_MODES, // int32[] | public | HIDL v3.2
+ ANDROID_SENSOR_ROLLING_SHUTTER_SKEW, // int64 | public | HIDL v3.2
+ ANDROID_SENSOR_OPTICAL_BLACK_REGIONS, // int32[] | public | HIDL v3.2
+ ANDROID_SENSOR_DYNAMIC_BLACK_LEVEL, // float[] | public | HIDL v3.2
+ ANDROID_SENSOR_DYNAMIC_WHITE_LEVEL, // int32 | public | HIDL v3.2
+ ANDROID_SENSOR_OPAQUE_RAW_SIZE, // int32[] | system | HIDL v3.2
+ ANDROID_SENSOR_END,
+
+ ANDROID_SENSOR_INFO_ACTIVE_ARRAY_SIZE = // int32[] | public | HIDL v3.2
+ ANDROID_SENSOR_INFO_START,
+ ANDROID_SENSOR_INFO_SENSITIVITY_RANGE, // int32[] | public | HIDL v3.2
+ ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT, // enum | public | HIDL v3.2
+ ANDROID_SENSOR_INFO_EXPOSURE_TIME_RANGE, // int64[] | public | HIDL v3.2
+ ANDROID_SENSOR_INFO_MAX_FRAME_DURATION, // int64 | public | HIDL v3.2
+ ANDROID_SENSOR_INFO_PHYSICAL_SIZE, // float[] | public | HIDL v3.2
+ ANDROID_SENSOR_INFO_PIXEL_ARRAY_SIZE, // int32[] | public | HIDL v3.2
+ ANDROID_SENSOR_INFO_WHITE_LEVEL, // int32 | public | HIDL v3.2
+ ANDROID_SENSOR_INFO_TIMESTAMP_SOURCE, // enum | public | HIDL v3.2
+ ANDROID_SENSOR_INFO_LENS_SHADING_APPLIED, // enum | public | HIDL v3.2
+ ANDROID_SENSOR_INFO_PRE_CORRECTION_ACTIVE_ARRAY_SIZE,
+ // int32[] | public | HIDL v3.2
+ ANDROID_SENSOR_INFO_END,
+
+ ANDROID_SHADING_MODE = // enum | public | HIDL v3.2
+ ANDROID_SHADING_START,
+ ANDROID_SHADING_STRENGTH, // byte | system | HIDL v3.2
+ ANDROID_SHADING_AVAILABLE_MODES, // byte[] | public | HIDL v3.2
+ ANDROID_SHADING_END,
+
+ ANDROID_STATISTICS_FACE_DETECT_MODE = // enum | public | HIDL v3.2
+ ANDROID_STATISTICS_START,
+ ANDROID_STATISTICS_HISTOGRAM_MODE, // enum | system | HIDL v3.2
+ ANDROID_STATISTICS_SHARPNESS_MAP_MODE, // enum | system | HIDL v3.2
+ ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE, // enum | public | HIDL v3.2
+ ANDROID_STATISTICS_FACE_IDS, // int32[] | ndk_public | HIDL v3.2
+ ANDROID_STATISTICS_FACE_LANDMARKS, // int32[] | ndk_public | HIDL v3.2
+ ANDROID_STATISTICS_FACE_RECTANGLES, // int32[] | ndk_public | HIDL v3.2
+ ANDROID_STATISTICS_FACE_SCORES, // byte[] | ndk_public | HIDL v3.2
+ ANDROID_STATISTICS_HISTOGRAM, // int32[] | system | HIDL v3.2
+ ANDROID_STATISTICS_SHARPNESS_MAP, // int32[] | system | HIDL v3.2
+ ANDROID_STATISTICS_LENS_SHADING_CORRECTION_MAP, // byte | java_public | HIDL v3.2
+ ANDROID_STATISTICS_LENS_SHADING_MAP, // float[] | ndk_public | HIDL v3.2
+ ANDROID_STATISTICS_PREDICTED_COLOR_GAINS, // float[] | hidden | HIDL v3.2
+ ANDROID_STATISTICS_PREDICTED_COLOR_TRANSFORM, // rational[] | hidden | HIDL v3.2
+ ANDROID_STATISTICS_SCENE_FLICKER, // enum | public | HIDL v3.2
+ ANDROID_STATISTICS_HOT_PIXEL_MAP, // int32[] | public | HIDL v3.2
+ ANDROID_STATISTICS_LENS_SHADING_MAP_MODE, // enum | public | HIDL v3.2
+ ANDROID_STATISTICS_OIS_DATA_MODE, // enum | public | HIDL v3.3
+ ANDROID_STATISTICS_OIS_TIMESTAMPS, // int64[] | ndk_public | HIDL v3.3
+ ANDROID_STATISTICS_OIS_X_SHIFTS, // float[] | ndk_public | HIDL v3.3
+ ANDROID_STATISTICS_OIS_Y_SHIFTS, // float[] | ndk_public | HIDL v3.3
+ ANDROID_STATISTICS_END,
+
+ ANDROID_STATISTICS_INFO_AVAILABLE_FACE_DETECT_MODES =
+ // byte[] | public | HIDL v3.2
+ ANDROID_STATISTICS_INFO_START,
+ ANDROID_STATISTICS_INFO_HISTOGRAM_BUCKET_COUNT, // int32 | system | HIDL v3.2
+ ANDROID_STATISTICS_INFO_MAX_FACE_COUNT, // int32 | public | HIDL v3.2
+ ANDROID_STATISTICS_INFO_MAX_HISTOGRAM_COUNT, // int32 | system | HIDL v3.2
+ ANDROID_STATISTICS_INFO_MAX_SHARPNESS_MAP_VALUE, // int32 | system | HIDL v3.2
+ ANDROID_STATISTICS_INFO_SHARPNESS_MAP_SIZE, // int32[] | system | HIDL v3.2
+ ANDROID_STATISTICS_INFO_AVAILABLE_HOT_PIXEL_MAP_MODES,
+ // byte[] | public | HIDL v3.2
+ ANDROID_STATISTICS_INFO_AVAILABLE_LENS_SHADING_MAP_MODES,
+ // byte[] | public | HIDL v3.2
+ ANDROID_STATISTICS_INFO_AVAILABLE_OIS_DATA_MODES, // byte[] | public | HIDL v3.3
+ ANDROID_STATISTICS_INFO_END,
+
+ ANDROID_TONEMAP_CURVE_BLUE = // float[] | ndk_public | HIDL v3.2
+ ANDROID_TONEMAP_START,
+ ANDROID_TONEMAP_CURVE_GREEN, // float[] | ndk_public | HIDL v3.2
+ ANDROID_TONEMAP_CURVE_RED, // float[] | ndk_public | HIDL v3.2
+ ANDROID_TONEMAP_MODE, // enum | public | HIDL v3.2
+ ANDROID_TONEMAP_MAX_CURVE_POINTS, // int32 | public | HIDL v3.2
+ ANDROID_TONEMAP_AVAILABLE_TONE_MAP_MODES, // byte[] | public | HIDL v3.2
+ ANDROID_TONEMAP_GAMMA, // float | public | HIDL v3.2
+ ANDROID_TONEMAP_PRESET_CURVE, // enum | public | HIDL v3.2
+ ANDROID_TONEMAP_END,
+
+ ANDROID_LED_TRANSMIT = // enum | hidden | HIDL v3.2
+ ANDROID_LED_START,
+ ANDROID_LED_AVAILABLE_LEDS, // enum[] | hidden | HIDL v3.2
+ ANDROID_LED_END,
+
+ ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL = // enum | public | HIDL v3.2
+ ANDROID_INFO_START,
+ ANDROID_INFO_VERSION, // byte | public | HIDL v3.3
+ ANDROID_INFO_END,
+
+ ANDROID_BLACK_LEVEL_LOCK = // enum | public | HIDL v3.2
+ ANDROID_BLACK_LEVEL_START,
+ ANDROID_BLACK_LEVEL_END,
+
+ ANDROID_SYNC_FRAME_NUMBER = // enum | ndk_public | HIDL v3.2
+ ANDROID_SYNC_START,
+ ANDROID_SYNC_MAX_LATENCY, // enum | public | HIDL v3.2
+ ANDROID_SYNC_END,
+
+ ANDROID_REPROCESS_EFFECTIVE_EXPOSURE_FACTOR = // float | java_public | HIDL v3.2
+ ANDROID_REPROCESS_START,
+ ANDROID_REPROCESS_MAX_CAPTURE_STALL, // int32 | java_public | HIDL v3.2
+ ANDROID_REPROCESS_END,
+
+ ANDROID_DEPTH_MAX_DEPTH_SAMPLES = // int32 | system | HIDL v3.2
+ ANDROID_DEPTH_START,
+ ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS,
+ // enum[] | ndk_public | HIDL v3.2
+ ANDROID_DEPTH_AVAILABLE_DEPTH_MIN_FRAME_DURATIONS,// int64[] | ndk_public | HIDL v3.2
+ ANDROID_DEPTH_AVAILABLE_DEPTH_STALL_DURATIONS, // int64[] | ndk_public | HIDL v3.2
+ ANDROID_DEPTH_DEPTH_IS_EXCLUSIVE, // enum | public | HIDL v3.2
+ ANDROID_DEPTH_END,
+
+ ANDROID_LOGICAL_MULTI_CAMERA_PHYSICAL_IDS = // byte[] | hidden | HIDL v3.3
+ ANDROID_LOGICAL_MULTI_CAMERA_START,
+ ANDROID_LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE, // enum | public | HIDL v3.3
+ ANDROID_LOGICAL_MULTI_CAMERA_END,
+
+ ANDROID_DISTORTION_CORRECTION_MODE = // enum | public | HIDL v3.3
+ ANDROID_DISTORTION_CORRECTION_START,
+ ANDROID_DISTORTION_CORRECTION_AVAILABLE_MODES, // byte[] | public | HIDL v3.3
+ ANDROID_DISTORTION_CORRECTION_END,
+
+} camera_metadata_tag_t;
+
+/**
+ * Enumeration definitions for the various entries that need them
+ */
+
+// ANDROID_COLOR_CORRECTION_MODE
+typedef enum camera_metadata_enum_android_color_correction_mode {
+ ANDROID_COLOR_CORRECTION_MODE_TRANSFORM_MATRIX , // HIDL v3.2
+ ANDROID_COLOR_CORRECTION_MODE_FAST , // HIDL v3.2
+ ANDROID_COLOR_CORRECTION_MODE_HIGH_QUALITY , // HIDL v3.2
+} camera_metadata_enum_android_color_correction_mode_t;
+
+// ANDROID_COLOR_CORRECTION_ABERRATION_MODE
+typedef enum camera_metadata_enum_android_color_correction_aberration_mode {
+ ANDROID_COLOR_CORRECTION_ABERRATION_MODE_OFF , // HIDL v3.2
+ ANDROID_COLOR_CORRECTION_ABERRATION_MODE_FAST , // HIDL v3.2
+ ANDROID_COLOR_CORRECTION_ABERRATION_MODE_HIGH_QUALITY , // HIDL v3.2
+} camera_metadata_enum_android_color_correction_aberration_mode_t;
+
+
+// ANDROID_CONTROL_AE_ANTIBANDING_MODE
+typedef enum camera_metadata_enum_android_control_ae_antibanding_mode {
+ ANDROID_CONTROL_AE_ANTIBANDING_MODE_OFF , // HIDL v3.2
+ ANDROID_CONTROL_AE_ANTIBANDING_MODE_50HZ , // HIDL v3.2
+ ANDROID_CONTROL_AE_ANTIBANDING_MODE_60HZ , // HIDL v3.2
+ ANDROID_CONTROL_AE_ANTIBANDING_MODE_AUTO , // HIDL v3.2
+} camera_metadata_enum_android_control_ae_antibanding_mode_t;
+
+// ANDROID_CONTROL_AE_LOCK
+typedef enum camera_metadata_enum_android_control_ae_lock {
+ ANDROID_CONTROL_AE_LOCK_OFF , // HIDL v3.2
+ ANDROID_CONTROL_AE_LOCK_ON , // HIDL v3.2
+} camera_metadata_enum_android_control_ae_lock_t;
+
+// ANDROID_CONTROL_AE_MODE
+typedef enum camera_metadata_enum_android_control_ae_mode {
+ ANDROID_CONTROL_AE_MODE_OFF , // HIDL v3.2
+ ANDROID_CONTROL_AE_MODE_ON , // HIDL v3.2
+ ANDROID_CONTROL_AE_MODE_ON_AUTO_FLASH , // HIDL v3.2
+ ANDROID_CONTROL_AE_MODE_ON_ALWAYS_FLASH , // HIDL v3.2
+ ANDROID_CONTROL_AE_MODE_ON_AUTO_FLASH_REDEYE , // HIDL v3.2
+ ANDROID_CONTROL_AE_MODE_ON_EXTERNAL_FLASH , // HIDL v3.3
+} camera_metadata_enum_android_control_ae_mode_t;
+
+// ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER
+typedef enum camera_metadata_enum_android_control_ae_precapture_trigger {
+ ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER_IDLE , // HIDL v3.2
+ ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER_START , // HIDL v3.2
+ ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER_CANCEL , // HIDL v3.2
+} camera_metadata_enum_android_control_ae_precapture_trigger_t;
+
+// ANDROID_CONTROL_AF_MODE
+typedef enum camera_metadata_enum_android_control_af_mode {
+ ANDROID_CONTROL_AF_MODE_OFF , // HIDL v3.2
+ ANDROID_CONTROL_AF_MODE_AUTO , // HIDL v3.2
+ ANDROID_CONTROL_AF_MODE_MACRO , // HIDL v3.2
+ ANDROID_CONTROL_AF_MODE_CONTINUOUS_VIDEO , // HIDL v3.2
+ ANDROID_CONTROL_AF_MODE_CONTINUOUS_PICTURE , // HIDL v3.2
+ ANDROID_CONTROL_AF_MODE_EDOF , // HIDL v3.2
+} camera_metadata_enum_android_control_af_mode_t;
+
+// ANDROID_CONTROL_AF_TRIGGER
+typedef enum camera_metadata_enum_android_control_af_trigger {
+ ANDROID_CONTROL_AF_TRIGGER_IDLE , // HIDL v3.2
+ ANDROID_CONTROL_AF_TRIGGER_START , // HIDL v3.2
+ ANDROID_CONTROL_AF_TRIGGER_CANCEL , // HIDL v3.2
+} camera_metadata_enum_android_control_af_trigger_t;
+
+// ANDROID_CONTROL_AWB_LOCK
+typedef enum camera_metadata_enum_android_control_awb_lock {
+ ANDROID_CONTROL_AWB_LOCK_OFF , // HIDL v3.2
+ ANDROID_CONTROL_AWB_LOCK_ON , // HIDL v3.2
+} camera_metadata_enum_android_control_awb_lock_t;
+
+// ANDROID_CONTROL_AWB_MODE
+typedef enum camera_metadata_enum_android_control_awb_mode {
+ ANDROID_CONTROL_AWB_MODE_OFF , // HIDL v3.2
+ ANDROID_CONTROL_AWB_MODE_AUTO , // HIDL v3.2
+ ANDROID_CONTROL_AWB_MODE_INCANDESCENT , // HIDL v3.2
+ ANDROID_CONTROL_AWB_MODE_FLUORESCENT , // HIDL v3.2
+ ANDROID_CONTROL_AWB_MODE_WARM_FLUORESCENT , // HIDL v3.2
+ ANDROID_CONTROL_AWB_MODE_DAYLIGHT , // HIDL v3.2
+ ANDROID_CONTROL_AWB_MODE_CLOUDY_DAYLIGHT , // HIDL v3.2
+ ANDROID_CONTROL_AWB_MODE_TWILIGHT , // HIDL v3.2
+ ANDROID_CONTROL_AWB_MODE_SHADE , // HIDL v3.2
+} camera_metadata_enum_android_control_awb_mode_t;
+
+// ANDROID_CONTROL_CAPTURE_INTENT
+typedef enum camera_metadata_enum_android_control_capture_intent {
+ ANDROID_CONTROL_CAPTURE_INTENT_CUSTOM , // HIDL v3.2
+ ANDROID_CONTROL_CAPTURE_INTENT_PREVIEW , // HIDL v3.2
+ ANDROID_CONTROL_CAPTURE_INTENT_STILL_CAPTURE , // HIDL v3.2
+ ANDROID_CONTROL_CAPTURE_INTENT_VIDEO_RECORD , // HIDL v3.2
+ ANDROID_CONTROL_CAPTURE_INTENT_VIDEO_SNAPSHOT , // HIDL v3.2
+ ANDROID_CONTROL_CAPTURE_INTENT_ZERO_SHUTTER_LAG , // HIDL v3.2
+ ANDROID_CONTROL_CAPTURE_INTENT_MANUAL , // HIDL v3.2
+ ANDROID_CONTROL_CAPTURE_INTENT_MOTION_TRACKING , // HIDL v3.3
+} camera_metadata_enum_android_control_capture_intent_t;
+
+// ANDROID_CONTROL_EFFECT_MODE
+typedef enum camera_metadata_enum_android_control_effect_mode {
+ ANDROID_CONTROL_EFFECT_MODE_OFF , // HIDL v3.2
+ ANDROID_CONTROL_EFFECT_MODE_MONO , // HIDL v3.2
+ ANDROID_CONTROL_EFFECT_MODE_NEGATIVE , // HIDL v3.2
+ ANDROID_CONTROL_EFFECT_MODE_SOLARIZE , // HIDL v3.2
+ ANDROID_CONTROL_EFFECT_MODE_SEPIA , // HIDL v3.2
+ ANDROID_CONTROL_EFFECT_MODE_POSTERIZE , // HIDL v3.2
+ ANDROID_CONTROL_EFFECT_MODE_WHITEBOARD , // HIDL v3.2
+ ANDROID_CONTROL_EFFECT_MODE_BLACKBOARD , // HIDL v3.2
+ ANDROID_CONTROL_EFFECT_MODE_AQUA , // HIDL v3.2
+} camera_metadata_enum_android_control_effect_mode_t;
+
+// ANDROID_CONTROL_MODE
+typedef enum camera_metadata_enum_android_control_mode {
+ ANDROID_CONTROL_MODE_OFF , // HIDL v3.2
+ ANDROID_CONTROL_MODE_AUTO , // HIDL v3.2
+ ANDROID_CONTROL_MODE_USE_SCENE_MODE , // HIDL v3.2
+ ANDROID_CONTROL_MODE_OFF_KEEP_STATE , // HIDL v3.2
+} camera_metadata_enum_android_control_mode_t;
+
+// ANDROID_CONTROL_SCENE_MODE
+typedef enum camera_metadata_enum_android_control_scene_mode {
+ ANDROID_CONTROL_SCENE_MODE_DISABLED = 0, // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_FACE_PRIORITY , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_ACTION , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_PORTRAIT , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_LANDSCAPE , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_NIGHT , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_NIGHT_PORTRAIT , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_THEATRE , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_BEACH , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_SNOW , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_SUNSET , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_STEADYPHOTO , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_FIREWORKS , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_SPORTS , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_PARTY , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_CANDLELIGHT , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_BARCODE , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_HIGH_SPEED_VIDEO , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_HDR , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_FACE_PRIORITY_LOW_LIGHT , // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_DEVICE_CUSTOM_START = 100, // HIDL v3.2
+ ANDROID_CONTROL_SCENE_MODE_DEVICE_CUSTOM_END = 127, // HIDL v3.2
+} camera_metadata_enum_android_control_scene_mode_t;
+
+// ANDROID_CONTROL_VIDEO_STABILIZATION_MODE
+typedef enum camera_metadata_enum_android_control_video_stabilization_mode {
+ ANDROID_CONTROL_VIDEO_STABILIZATION_MODE_OFF , // HIDL v3.2
+ ANDROID_CONTROL_VIDEO_STABILIZATION_MODE_ON , // HIDL v3.2
+} camera_metadata_enum_android_control_video_stabilization_mode_t;
+
+// ANDROID_CONTROL_AE_STATE
+typedef enum camera_metadata_enum_android_control_ae_state {
+ ANDROID_CONTROL_AE_STATE_INACTIVE , // HIDL v3.2
+ ANDROID_CONTROL_AE_STATE_SEARCHING , // HIDL v3.2
+ ANDROID_CONTROL_AE_STATE_CONVERGED , // HIDL v3.2
+ ANDROID_CONTROL_AE_STATE_LOCKED , // HIDL v3.2
+ ANDROID_CONTROL_AE_STATE_FLASH_REQUIRED , // HIDL v3.2
+ ANDROID_CONTROL_AE_STATE_PRECAPTURE , // HIDL v3.2
+} camera_metadata_enum_android_control_ae_state_t;
+
+// ANDROID_CONTROL_AF_STATE
+typedef enum camera_metadata_enum_android_control_af_state {
+ ANDROID_CONTROL_AF_STATE_INACTIVE , // HIDL v3.2
+ ANDROID_CONTROL_AF_STATE_PASSIVE_SCAN , // HIDL v3.2
+ ANDROID_CONTROL_AF_STATE_PASSIVE_FOCUSED , // HIDL v3.2
+ ANDROID_CONTROL_AF_STATE_ACTIVE_SCAN , // HIDL v3.2
+ ANDROID_CONTROL_AF_STATE_FOCUSED_LOCKED , // HIDL v3.2
+ ANDROID_CONTROL_AF_STATE_NOT_FOCUSED_LOCKED , // HIDL v3.2
+ ANDROID_CONTROL_AF_STATE_PASSIVE_UNFOCUSED , // HIDL v3.2
+} camera_metadata_enum_android_control_af_state_t;
+
+// ANDROID_CONTROL_AWB_STATE
+typedef enum camera_metadata_enum_android_control_awb_state {
+ ANDROID_CONTROL_AWB_STATE_INACTIVE , // HIDL v3.2
+ ANDROID_CONTROL_AWB_STATE_SEARCHING , // HIDL v3.2
+ ANDROID_CONTROL_AWB_STATE_CONVERGED , // HIDL v3.2
+ ANDROID_CONTROL_AWB_STATE_LOCKED , // HIDL v3.2
+} camera_metadata_enum_android_control_awb_state_t;
+
+// ANDROID_CONTROL_AE_LOCK_AVAILABLE
+typedef enum camera_metadata_enum_android_control_ae_lock_available {
+ ANDROID_CONTROL_AE_LOCK_AVAILABLE_FALSE , // HIDL v3.2
+ ANDROID_CONTROL_AE_LOCK_AVAILABLE_TRUE , // HIDL v3.2
+} camera_metadata_enum_android_control_ae_lock_available_t;
+
+// ANDROID_CONTROL_AWB_LOCK_AVAILABLE
+typedef enum camera_metadata_enum_android_control_awb_lock_available {
+ ANDROID_CONTROL_AWB_LOCK_AVAILABLE_FALSE , // HIDL v3.2
+ ANDROID_CONTROL_AWB_LOCK_AVAILABLE_TRUE , // HIDL v3.2
+} camera_metadata_enum_android_control_awb_lock_available_t;
+
+// ANDROID_CONTROL_ENABLE_ZSL
+typedef enum camera_metadata_enum_android_control_enable_zsl {
+ ANDROID_CONTROL_ENABLE_ZSL_FALSE , // HIDL v3.2
+ ANDROID_CONTROL_ENABLE_ZSL_TRUE , // HIDL v3.2
+} camera_metadata_enum_android_control_enable_zsl_t;
+
+// ANDROID_CONTROL_AF_SCENE_CHANGE
+typedef enum camera_metadata_enum_android_control_af_scene_change {
+ ANDROID_CONTROL_AF_SCENE_CHANGE_NOT_DETECTED , // HIDL v3.3
+ ANDROID_CONTROL_AF_SCENE_CHANGE_DETECTED , // HIDL v3.3
+} camera_metadata_enum_android_control_af_scene_change_t;
+
+
+// ANDROID_DEMOSAIC_MODE
+typedef enum camera_metadata_enum_android_demosaic_mode {
+ ANDROID_DEMOSAIC_MODE_FAST , // HIDL v3.2
+ ANDROID_DEMOSAIC_MODE_HIGH_QUALITY , // HIDL v3.2
+} camera_metadata_enum_android_demosaic_mode_t;
+
+
+// ANDROID_EDGE_MODE
+typedef enum camera_metadata_enum_android_edge_mode {
+ ANDROID_EDGE_MODE_OFF , // HIDL v3.2
+ ANDROID_EDGE_MODE_FAST , // HIDL v3.2
+ ANDROID_EDGE_MODE_HIGH_QUALITY , // HIDL v3.2
+ ANDROID_EDGE_MODE_ZERO_SHUTTER_LAG , // HIDL v3.2
+} camera_metadata_enum_android_edge_mode_t;
+
+
+// ANDROID_FLASH_MODE
+typedef enum camera_metadata_enum_android_flash_mode {
+ ANDROID_FLASH_MODE_OFF , // HIDL v3.2
+ ANDROID_FLASH_MODE_SINGLE , // HIDL v3.2
+ ANDROID_FLASH_MODE_TORCH , // HIDL v3.2
+} camera_metadata_enum_android_flash_mode_t;
+
+// ANDROID_FLASH_STATE
+typedef enum camera_metadata_enum_android_flash_state {
+ ANDROID_FLASH_STATE_UNAVAILABLE , // HIDL v3.2
+ ANDROID_FLASH_STATE_CHARGING , // HIDL v3.2
+ ANDROID_FLASH_STATE_READY , // HIDL v3.2
+ ANDROID_FLASH_STATE_FIRED , // HIDL v3.2
+ ANDROID_FLASH_STATE_PARTIAL , // HIDL v3.2
+} camera_metadata_enum_android_flash_state_t;
+
+
+// ANDROID_FLASH_INFO_AVAILABLE
+typedef enum camera_metadata_enum_android_flash_info_available {
+ ANDROID_FLASH_INFO_AVAILABLE_FALSE , // HIDL v3.2
+ ANDROID_FLASH_INFO_AVAILABLE_TRUE , // HIDL v3.2
+} camera_metadata_enum_android_flash_info_available_t;
+
+
+// ANDROID_HOT_PIXEL_MODE
+typedef enum camera_metadata_enum_android_hot_pixel_mode {
+ ANDROID_HOT_PIXEL_MODE_OFF , // HIDL v3.2
+ ANDROID_HOT_PIXEL_MODE_FAST , // HIDL v3.2
+ ANDROID_HOT_PIXEL_MODE_HIGH_QUALITY , // HIDL v3.2
+} camera_metadata_enum_android_hot_pixel_mode_t;
+
+
+
+// ANDROID_LENS_OPTICAL_STABILIZATION_MODE
+typedef enum camera_metadata_enum_android_lens_optical_stabilization_mode {
+ ANDROID_LENS_OPTICAL_STABILIZATION_MODE_OFF , // HIDL v3.2
+ ANDROID_LENS_OPTICAL_STABILIZATION_MODE_ON , // HIDL v3.2
+} camera_metadata_enum_android_lens_optical_stabilization_mode_t;
+
+// ANDROID_LENS_FACING
+typedef enum camera_metadata_enum_android_lens_facing {
+ ANDROID_LENS_FACING_FRONT , // HIDL v3.2
+ ANDROID_LENS_FACING_BACK , // HIDL v3.2
+ ANDROID_LENS_FACING_EXTERNAL , // HIDL v3.2
+} camera_metadata_enum_android_lens_facing_t;
+
+// ANDROID_LENS_STATE
+typedef enum camera_metadata_enum_android_lens_state {
+ ANDROID_LENS_STATE_STATIONARY , // HIDL v3.2
+ ANDROID_LENS_STATE_MOVING , // HIDL v3.2
+} camera_metadata_enum_android_lens_state_t;
+
+// ANDROID_LENS_POSE_REFERENCE
+typedef enum camera_metadata_enum_android_lens_pose_reference {
+ ANDROID_LENS_POSE_REFERENCE_PRIMARY_CAMERA , // HIDL v3.3
+ ANDROID_LENS_POSE_REFERENCE_GYROSCOPE , // HIDL v3.3
+} camera_metadata_enum_android_lens_pose_reference_t;
+
+
+// ANDROID_LENS_INFO_FOCUS_DISTANCE_CALIBRATION
+typedef enum camera_metadata_enum_android_lens_info_focus_distance_calibration {
+ ANDROID_LENS_INFO_FOCUS_DISTANCE_CALIBRATION_UNCALIBRATED , // HIDL v3.2
+ ANDROID_LENS_INFO_FOCUS_DISTANCE_CALIBRATION_APPROXIMATE , // HIDL v3.2
+ ANDROID_LENS_INFO_FOCUS_DISTANCE_CALIBRATION_CALIBRATED , // HIDL v3.2
+} camera_metadata_enum_android_lens_info_focus_distance_calibration_t;
+
+
+// ANDROID_NOISE_REDUCTION_MODE
+typedef enum camera_metadata_enum_android_noise_reduction_mode {
+ ANDROID_NOISE_REDUCTION_MODE_OFF , // HIDL v3.2
+ ANDROID_NOISE_REDUCTION_MODE_FAST , // HIDL v3.2
+ ANDROID_NOISE_REDUCTION_MODE_HIGH_QUALITY , // HIDL v3.2
+ ANDROID_NOISE_REDUCTION_MODE_MINIMAL , // HIDL v3.2
+ ANDROID_NOISE_REDUCTION_MODE_ZERO_SHUTTER_LAG , // HIDL v3.2
+} camera_metadata_enum_android_noise_reduction_mode_t;
+
+
+// ANDROID_QUIRKS_PARTIAL_RESULT
+typedef enum camera_metadata_enum_android_quirks_partial_result {
+ ANDROID_QUIRKS_PARTIAL_RESULT_FINAL , // HIDL v3.2
+ ANDROID_QUIRKS_PARTIAL_RESULT_PARTIAL , // HIDL v3.2
+} camera_metadata_enum_android_quirks_partial_result_t;
+
+
+// ANDROID_REQUEST_METADATA_MODE
+typedef enum camera_metadata_enum_android_request_metadata_mode {
+ ANDROID_REQUEST_METADATA_MODE_NONE , // HIDL v3.2
+ ANDROID_REQUEST_METADATA_MODE_FULL , // HIDL v3.2
+} camera_metadata_enum_android_request_metadata_mode_t;
+
+// ANDROID_REQUEST_TYPE
+typedef enum camera_metadata_enum_android_request_type {
+ ANDROID_REQUEST_TYPE_CAPTURE , // HIDL v3.2
+ ANDROID_REQUEST_TYPE_REPROCESS , // HIDL v3.2
+} camera_metadata_enum_android_request_type_t;
+
+// ANDROID_REQUEST_AVAILABLE_CAPABILITIES
+typedef enum camera_metadata_enum_android_request_available_capabilities {
+ ANDROID_REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE , // HIDL v3.2
+ ANDROID_REQUEST_AVAILABLE_CAPABILITIES_MANUAL_SENSOR , // HIDL v3.2
+ ANDROID_REQUEST_AVAILABLE_CAPABILITIES_MANUAL_POST_PROCESSING , // HIDL v3.2
+ ANDROID_REQUEST_AVAILABLE_CAPABILITIES_RAW , // HIDL v3.2
+ ANDROID_REQUEST_AVAILABLE_CAPABILITIES_PRIVATE_REPROCESSING , // HIDL v3.2
+ ANDROID_REQUEST_AVAILABLE_CAPABILITIES_READ_SENSOR_SETTINGS , // HIDL v3.2
+ ANDROID_REQUEST_AVAILABLE_CAPABILITIES_BURST_CAPTURE , // HIDL v3.2
+ ANDROID_REQUEST_AVAILABLE_CAPABILITIES_YUV_REPROCESSING , // HIDL v3.2
+ ANDROID_REQUEST_AVAILABLE_CAPABILITIES_DEPTH_OUTPUT , // HIDL v3.2
+ ANDROID_REQUEST_AVAILABLE_CAPABILITIES_CONSTRAINED_HIGH_SPEED_VIDEO
+ , // HIDL v3.2
+ ANDROID_REQUEST_AVAILABLE_CAPABILITIES_MOTION_TRACKING , // HIDL v3.3
+ ANDROID_REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA , // HIDL v3.3
+ ANDROID_REQUEST_AVAILABLE_CAPABILITIES_MONOCHROME , // HIDL v3.3
+} camera_metadata_enum_android_request_available_capabilities_t;
+
+
+// ANDROID_SCALER_AVAILABLE_FORMATS
+typedef enum camera_metadata_enum_android_scaler_available_formats {
+ ANDROID_SCALER_AVAILABLE_FORMATS_RAW16 = 0x20, // HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_FORMATS_RAW_OPAQUE = 0x24, // HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_FORMATS_YV12 = 0x32315659, // HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_FORMATS_YCrCb_420_SP = 0x11, // HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_FORMATS_IMPLEMENTATION_DEFINED = 0x22, // HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_FORMATS_YCbCr_420_888 = 0x23, // HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_FORMATS_BLOB = 0x21, // HIDL v3.2
+} camera_metadata_enum_android_scaler_available_formats_t;
+
+// ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS
+typedef enum camera_metadata_enum_android_scaler_available_stream_configurations {
+ ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS_OUTPUT , // HIDL v3.2
+ ANDROID_SCALER_AVAILABLE_STREAM_CONFIGURATIONS_INPUT , // HIDL v3.2
+} camera_metadata_enum_android_scaler_available_stream_configurations_t;
+
+// ANDROID_SCALER_CROPPING_TYPE
+typedef enum camera_metadata_enum_android_scaler_cropping_type {
+ ANDROID_SCALER_CROPPING_TYPE_CENTER_ONLY , // HIDL v3.2
+ ANDROID_SCALER_CROPPING_TYPE_FREEFORM , // HIDL v3.2
+} camera_metadata_enum_android_scaler_cropping_type_t;
+
+
+// ANDROID_SENSOR_REFERENCE_ILLUMINANT1
+typedef enum camera_metadata_enum_android_sensor_reference_illuminant1 {
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT = 1, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_FLUORESCENT = 2, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_TUNGSTEN = 3, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_FLASH = 4, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_FINE_WEATHER = 9, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_CLOUDY_WEATHER = 10, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_SHADE = 11, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_DAYLIGHT_FLUORESCENT = 12, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_DAY_WHITE_FLUORESCENT = 13, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_COOL_WHITE_FLUORESCENT = 14, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_WHITE_FLUORESCENT = 15, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_STANDARD_A = 17, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_STANDARD_B = 18, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_STANDARD_C = 19, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_D55 = 20, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_D65 = 21, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_D75 = 22, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_D50 = 23, // HIDL v3.2
+ ANDROID_SENSOR_REFERENCE_ILLUMINANT1_ISO_STUDIO_TUNGSTEN = 24, // HIDL v3.2
+} camera_metadata_enum_android_sensor_reference_illuminant1_t;
+
+// ANDROID_SENSOR_TEST_PATTERN_MODE
+typedef enum camera_metadata_enum_android_sensor_test_pattern_mode {
+ ANDROID_SENSOR_TEST_PATTERN_MODE_OFF , // HIDL v3.2
+ ANDROID_SENSOR_TEST_PATTERN_MODE_SOLID_COLOR , // HIDL v3.2
+ ANDROID_SENSOR_TEST_PATTERN_MODE_COLOR_BARS , // HIDL v3.2
+ ANDROID_SENSOR_TEST_PATTERN_MODE_COLOR_BARS_FADE_TO_GRAY , // HIDL v3.2
+ ANDROID_SENSOR_TEST_PATTERN_MODE_PN9 , // HIDL v3.2
+ ANDROID_SENSOR_TEST_PATTERN_MODE_CUSTOM1 = 256, // HIDL v3.2
+} camera_metadata_enum_android_sensor_test_pattern_mode_t;
+
+
+// ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT
+typedef enum camera_metadata_enum_android_sensor_info_color_filter_arrangement {
+ ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGGB , // HIDL v3.2
+ ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GRBG , // HIDL v3.2
+ ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_GBRG , // HIDL v3.2
+ ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_BGGR , // HIDL v3.2
+ ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT_RGB , // HIDL v3.2
+} camera_metadata_enum_android_sensor_info_color_filter_arrangement_t;
+
+// ANDROID_SENSOR_INFO_TIMESTAMP_SOURCE
+typedef enum camera_metadata_enum_android_sensor_info_timestamp_source {
+ ANDROID_SENSOR_INFO_TIMESTAMP_SOURCE_UNKNOWN , // HIDL v3.2
+ ANDROID_SENSOR_INFO_TIMESTAMP_SOURCE_REALTIME , // HIDL v3.2
+} camera_metadata_enum_android_sensor_info_timestamp_source_t;
+
+// ANDROID_SENSOR_INFO_LENS_SHADING_APPLIED
+typedef enum camera_metadata_enum_android_sensor_info_lens_shading_applied {
+ ANDROID_SENSOR_INFO_LENS_SHADING_APPLIED_FALSE , // HIDL v3.2
+ ANDROID_SENSOR_INFO_LENS_SHADING_APPLIED_TRUE , // HIDL v3.2
+} camera_metadata_enum_android_sensor_info_lens_shading_applied_t;
+
+
+// ANDROID_SHADING_MODE
+typedef enum camera_metadata_enum_android_shading_mode {
+ ANDROID_SHADING_MODE_OFF , // HIDL v3.2
+ ANDROID_SHADING_MODE_FAST , // HIDL v3.2
+ ANDROID_SHADING_MODE_HIGH_QUALITY , // HIDL v3.2
+} camera_metadata_enum_android_shading_mode_t;
+
+
+// ANDROID_STATISTICS_FACE_DETECT_MODE
+typedef enum camera_metadata_enum_android_statistics_face_detect_mode {
+ ANDROID_STATISTICS_FACE_DETECT_MODE_OFF , // HIDL v3.2
+ ANDROID_STATISTICS_FACE_DETECT_MODE_SIMPLE , // HIDL v3.2
+ ANDROID_STATISTICS_FACE_DETECT_MODE_FULL , // HIDL v3.2
+} camera_metadata_enum_android_statistics_face_detect_mode_t;
+
+// ANDROID_STATISTICS_HISTOGRAM_MODE
+typedef enum camera_metadata_enum_android_statistics_histogram_mode {
+ ANDROID_STATISTICS_HISTOGRAM_MODE_OFF , // HIDL v3.2
+ ANDROID_STATISTICS_HISTOGRAM_MODE_ON , // HIDL v3.2
+} camera_metadata_enum_android_statistics_histogram_mode_t;
+
+// ANDROID_STATISTICS_SHARPNESS_MAP_MODE
+typedef enum camera_metadata_enum_android_statistics_sharpness_map_mode {
+ ANDROID_STATISTICS_SHARPNESS_MAP_MODE_OFF , // HIDL v3.2
+ ANDROID_STATISTICS_SHARPNESS_MAP_MODE_ON , // HIDL v3.2
+} camera_metadata_enum_android_statistics_sharpness_map_mode_t;
+
+// ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE
+typedef enum camera_metadata_enum_android_statistics_hot_pixel_map_mode {
+ ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE_OFF , // HIDL v3.2
+ ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE_ON , // HIDL v3.2
+} camera_metadata_enum_android_statistics_hot_pixel_map_mode_t;
+
+// ANDROID_STATISTICS_SCENE_FLICKER
+typedef enum camera_metadata_enum_android_statistics_scene_flicker {
+ ANDROID_STATISTICS_SCENE_FLICKER_NONE , // HIDL v3.2
+ ANDROID_STATISTICS_SCENE_FLICKER_50HZ , // HIDL v3.2
+ ANDROID_STATISTICS_SCENE_FLICKER_60HZ , // HIDL v3.2
+} camera_metadata_enum_android_statistics_scene_flicker_t;
+
+// ANDROID_STATISTICS_LENS_SHADING_MAP_MODE
+typedef enum camera_metadata_enum_android_statistics_lens_shading_map_mode {
+ ANDROID_STATISTICS_LENS_SHADING_MAP_MODE_OFF , // HIDL v3.2
+ ANDROID_STATISTICS_LENS_SHADING_MAP_MODE_ON , // HIDL v3.2
+} camera_metadata_enum_android_statistics_lens_shading_map_mode_t;
+
+// ANDROID_STATISTICS_OIS_DATA_MODE
+typedef enum camera_metadata_enum_android_statistics_ois_data_mode {
+ ANDROID_STATISTICS_OIS_DATA_MODE_OFF , // HIDL v3.3
+ ANDROID_STATISTICS_OIS_DATA_MODE_ON , // HIDL v3.3
+} camera_metadata_enum_android_statistics_ois_data_mode_t;
+
+
+
+// ANDROID_TONEMAP_MODE
+typedef enum camera_metadata_enum_android_tonemap_mode {
+ ANDROID_TONEMAP_MODE_CONTRAST_CURVE , // HIDL v3.2
+ ANDROID_TONEMAP_MODE_FAST , // HIDL v3.2
+ ANDROID_TONEMAP_MODE_HIGH_QUALITY , // HIDL v3.2
+ ANDROID_TONEMAP_MODE_GAMMA_VALUE , // HIDL v3.2
+ ANDROID_TONEMAP_MODE_PRESET_CURVE , // HIDL v3.2
+} camera_metadata_enum_android_tonemap_mode_t;
+
+// ANDROID_TONEMAP_PRESET_CURVE
+typedef enum camera_metadata_enum_android_tonemap_preset_curve {
+ ANDROID_TONEMAP_PRESET_CURVE_SRGB , // HIDL v3.2
+ ANDROID_TONEMAP_PRESET_CURVE_REC709 , // HIDL v3.2
+} camera_metadata_enum_android_tonemap_preset_curve_t;
+
+
+// ANDROID_LED_TRANSMIT
+typedef enum camera_metadata_enum_android_led_transmit {
+ ANDROID_LED_TRANSMIT_OFF , // HIDL v3.2
+ ANDROID_LED_TRANSMIT_ON , // HIDL v3.2
+} camera_metadata_enum_android_led_transmit_t;
+
+// ANDROID_LED_AVAILABLE_LEDS
+typedef enum camera_metadata_enum_android_led_available_leds {
+ ANDROID_LED_AVAILABLE_LEDS_TRANSMIT , // HIDL v3.2
+} camera_metadata_enum_android_led_available_leds_t;
+
+
+// ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL
+typedef enum camera_metadata_enum_android_info_supported_hardware_level {
+ ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_LIMITED , // HIDL v3.2
+ ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_FULL , // HIDL v3.2
+ ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_LEGACY , // HIDL v3.2
+ ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_3 , // HIDL v3.2
+ ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_EXTERNAL , // HIDL v3.3
+} camera_metadata_enum_android_info_supported_hardware_level_t;
+
+
+// ANDROID_BLACK_LEVEL_LOCK
+typedef enum camera_metadata_enum_android_black_level_lock {
+ ANDROID_BLACK_LEVEL_LOCK_OFF , // HIDL v3.2
+ ANDROID_BLACK_LEVEL_LOCK_ON , // HIDL v3.2
+} camera_metadata_enum_android_black_level_lock_t;
+
+
+// ANDROID_SYNC_FRAME_NUMBER
+typedef enum camera_metadata_enum_android_sync_frame_number {
+ ANDROID_SYNC_FRAME_NUMBER_CONVERGING = -1, // HIDL v3.2
+ ANDROID_SYNC_FRAME_NUMBER_UNKNOWN = -2, // HIDL v3.2
+} camera_metadata_enum_android_sync_frame_number_t;
+
+// ANDROID_SYNC_MAX_LATENCY
+typedef enum camera_metadata_enum_android_sync_max_latency {
+ ANDROID_SYNC_MAX_LATENCY_PER_FRAME_CONTROL = 0, // HIDL v3.2
+ ANDROID_SYNC_MAX_LATENCY_UNKNOWN = -1, // HIDL v3.2
+} camera_metadata_enum_android_sync_max_latency_t;
+
+
+
+// ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS
+typedef enum camera_metadata_enum_android_depth_available_depth_stream_configurations {
+ ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_OUTPUT , // HIDL v3.2
+ ANDROID_DEPTH_AVAILABLE_DEPTH_STREAM_CONFIGURATIONS_INPUT , // HIDL v3.2
+} camera_metadata_enum_android_depth_available_depth_stream_configurations_t;
+
+// ANDROID_DEPTH_DEPTH_IS_EXCLUSIVE
+typedef enum camera_metadata_enum_android_depth_depth_is_exclusive {
+ ANDROID_DEPTH_DEPTH_IS_EXCLUSIVE_FALSE , // HIDL v3.2
+ ANDROID_DEPTH_DEPTH_IS_EXCLUSIVE_TRUE , // HIDL v3.2
+} camera_metadata_enum_android_depth_depth_is_exclusive_t;
+
+
+// ANDROID_LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE
+typedef enum camera_metadata_enum_android_logical_multi_camera_sensor_sync_type {
+ ANDROID_LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_APPROXIMATE , // HIDL v3.3
+ ANDROID_LOGICAL_MULTI_CAMERA_SENSOR_SYNC_TYPE_CALIBRATED , // HIDL v3.3
+} camera_metadata_enum_android_logical_multi_camera_sensor_sync_type_t;
+
+
+// ANDROID_DISTORTION_CORRECTION_MODE
+typedef enum camera_metadata_enum_android_distortion_correction_mode {
+ ANDROID_DISTORTION_CORRECTION_MODE_OFF , // HIDL v3.3
+ ANDROID_DISTORTION_CORRECTION_MODE_FAST , // HIDL v3.3
+ ANDROID_DISTORTION_CORRECTION_MODE_HIGH_QUALITY , // HIDL v3.3
+} camera_metadata_enum_android_distortion_correction_mode_t;
+
+
diff --git a/include/android/metadata/system/camera_vendor_tags.h b/include/android/metadata/system/camera_vendor_tags.h
new file mode 100644
index 00000000..0bb54260
--- /dev/null
+++ b/include/android/metadata/system/camera_vendor_tags.h
@@ -0,0 +1,158 @@
+/*
+ * Copyright 2014 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SYSTEM_MEDIA_INCLUDE_ANDROID_CAMERA_VENDOR_TAGS_H
+#define SYSTEM_MEDIA_INCLUDE_ANDROID_CAMERA_VENDOR_TAGS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define CAMERA_METADATA_VENDOR_TAG_BOUNDARY 0x80000000u
+#define CAMERA_METADATA_INVALID_VENDOR_ID UINT64_MAX
+
+typedef uint64_t metadata_vendor_id_t;
+
+/**
+ * Vendor tags:
+ *
+ * This structure contains basic functions for enumerating an immutable set of
+ * vendor-defined camera metadata tags, and querying static information about
+ * their structure/type. The intended use of this information is to validate
+ * the structure of metadata returned by the camera HAL, and to allow vendor-
+ * defined metadata tags to be visible in application facing camera API.
+ */
+typedef struct vendor_tag_ops vendor_tag_ops_t;
+struct vendor_tag_ops {
+ /**
+ * Get the number of vendor tags supported on this platform. Used to
+ * calculate the size of buffer needed for holding the array of all tags
+ * returned by get_all_tags(). This must return -1 on error.
+ */
+ int (*get_tag_count)(const vendor_tag_ops_t *v);
+
+ /**
+ * Fill an array with all of the supported vendor tags on this platform.
+ * get_tag_count() must return the number of tags supported, and
+ * tag_array will be allocated with enough space to hold the number of tags
+ * returned by get_tag_count().
+ */
+ void (*get_all_tags)(const vendor_tag_ops_t *v, uint32_t *tag_array);
+
+ /**
+ * Get the vendor section name for a vendor-specified entry tag. This will
+ * only be called for vendor-defined tags.
+ *
+ * The naming convention for the vendor-specific section names should
+ * follow a style similar to the Java package style. For example,
+ * CameraZoom Inc. must prefix their sections with "com.camerazoom."
+ * This must return NULL if the tag is outside the bounds of
+ * vendor-defined sections.
+ *
+ * There may be different vendor-defined tag sections, for example the
+ * phone maker, the chipset maker, and the camera module maker may each
+ * have their own "com.vendor."-prefixed section.
+ *
+ * The memory pointed to by the return value must remain valid for the
+ * lifetime of the module, and is owned by the module.
+ */
+ const char *(*get_section_name)(const vendor_tag_ops_t *v, uint32_t tag);
+
+ /**
+ * Get the tag name for a vendor-specified entry tag. This is only called
+ * for vendor-defined tags, and must return NULL if it is not a
+ * vendor-defined tag.
+ *
+ * The memory pointed to by the return value must remain valid for the
+ * lifetime of the module, and is owned by the module.
+ */
+ const char *(*get_tag_name)(const vendor_tag_ops_t *v, uint32_t tag);
+
+ /**
+ * Get tag type for a vendor-specified entry tag. The type returned must be
+ * a valid type defined in camera_metadata.h. This method is only called
+ * for tags >= CAMERA_METADATA_VENDOR_TAG_BOUNDARY, and must return
+ * -1 if the tag is outside the bounds of the vendor-defined sections.
+ */
+ int (*get_tag_type)(const vendor_tag_ops_t *v, uint32_t tag);
+
+ /* Reserved for future use. These must be initialized to NULL. */
+ void* reserved[8];
+};
+
+struct vendor_tag_cache_ops {
+ /**
+ * Get the number of vendor tags supported on this platform. Used to
+ * calculate the size of buffer needed for holding the array of all tags
+ * returned by get_all_tags(). This must return -1 on error.
+ */
+ int (*get_tag_count)(metadata_vendor_id_t id);
+
+ /**
+ * Fill an array with all of the supported vendor tags on this platform.
+ * get_tag_count() must return the number of tags supported, and
+ * tag_array will be allocated with enough space to hold the number of tags
+ * returned by get_tag_count().
+ */
+ void (*get_all_tags)(uint32_t *tag_array, metadata_vendor_id_t id);
+
+ /**
+ * Get the vendor section name for a vendor-specified entry tag. This will
+ * only be called for vendor-defined tags.
+ *
+ * The naming convention for the vendor-specific section names should
+ * follow a style similar to the Java package style. For example,
+ * CameraZoom Inc. must prefix their sections with "com.camerazoom."
+ * This must return NULL if the tag is outside the bounds of
+ * vendor-defined sections.
+ *
+ * There may be different vendor-defined tag sections, for example the
+ * phone maker, the chipset maker, and the camera module maker may each
+ * have their own "com.vendor."-prefixed section.
+ *
+ * The memory pointed to by the return value must remain valid for the
+ * lifetime of the module, and is owned by the module.
+ */
+ const char *(*get_section_name)(uint32_t tag, metadata_vendor_id_t id);
+
+ /**
+ * Get the tag name for a vendor-specified entry tag. This is only called
+ * for vendor-defined tags, and must return NULL if it is not a
+ * vendor-defined tag.
+ *
+ * The memory pointed to by the return value must remain valid for the
+ * lifetime of the module, and is owned by the module.
+ */
+ const char *(*get_tag_name)(uint32_t tag, metadata_vendor_id_t id);
+
+ /**
+ * Get tag type for a vendor-specified entry tag. The type returned must be
+ * a valid type defined in camera_metadata.h. This method is only called
+ * for tags >= CAMERA_METADATA_VENDOR_TAG_BOUNDARY, and must return
+ * -1 if the tag is outside the bounds of the vendor-defined sections.
+ */
+ int (*get_tag_type)(uint32_t tag, metadata_vendor_id_t id);
+
+ /* Reserved for future use. These must be initialized to NULL. */
+ void* reserved[8];
+};
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* SYSTEM_MEDIA_INCLUDE_ANDROID_CAMERA_VENDOR_TAGS_H */
+
diff --git a/include/android/system/core/include/android/log.h b/include/android/system/core/include/android/log.h
new file mode 100644
index 00000000..1c171b7b
--- /dev/null
+++ b/include/android/system/core/include/android/log.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2009 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef _ANDROID_LOG_H
+#define _ANDROID_LOG_H
+
+/******************************************************************
+ *
+ * IMPORTANT NOTICE:
+ *
+ * This file is part of Android's set of stable system headers
+ * exposed by the Android NDK (Native Development Kit) since
+ * platform release 1.5
+ *
+ * Third-party source AND binary code relies on the definitions
+ * here to be FROZEN ON ALL UPCOMING PLATFORM RELEASES.
+ *
+ * - DO NOT MODIFY ENUMS (EXCEPT IF YOU ADD NEW 32-BIT VALUES)
+ * - DO NOT MODIFY CONSTANTS OR FUNCTIONAL MACROS
+ * - DO NOT CHANGE THE SIGNATURE OF FUNCTIONS IN ANY WAY
+ * - DO NOT CHANGE THE LAYOUT OR SIZE OF STRUCTURES
+ */
+
+/*
+ * Support routines to send messages to the Android in-kernel log buffer,
+ * which can later be accessed through the 'logcat' utility.
+ *
+ * Each log message must have
+ * - a priority
+ * - a log tag
+ * - some text
+ *
+ * The tag normally corresponds to the component that emits the log message,
+ * and should be reasonably small.
+ *
+ * Log message text may be truncated to less than an implementation-specific
+ * limit (e.g. 1023 characters max).
+ *
+ * Note that a newline character ("\n") will be appended automatically to your
+ * log message, if not already there. It is not possible to send several messages
+ * and have them appear on a single line in logcat.
+ *
+ * PLEASE USE LOGS WITH MODERATION:
+ *
+ * - Sending log messages eats CPU and slow down your application and the
+ * system.
+ *
+ * - The circular log buffer is pretty small (<64KB), sending many messages
+ * might push off other important log messages from the rest of the system.
+ *
+ * - In release builds, only send log messages to account for exceptional
+ * conditions.
+ *
+ * NOTE: These functions MUST be implemented by /system/lib/liblog.so
+ */
+
+#include <stdarg.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Android log priority values, in ascending priority order.
+ */
+typedef enum android_LogPriority {
+ ANDROID_LOG_UNKNOWN = 0,
+ ANDROID_LOG_DEFAULT, /* only for SetMinPriority() */
+ ANDROID_LOG_VERBOSE,
+ ANDROID_LOG_DEBUG,
+ ANDROID_LOG_INFO,
+ ANDROID_LOG_WARN,
+ ANDROID_LOG_ERROR,
+ ANDROID_LOG_FATAL,
+ ANDROID_LOG_SILENT, /* only for SetMinPriority(); must be last */
+} android_LogPriority;
+
+/*
+ * Send a simple string to the log.
+ */
+int __android_log_write(int prio, const char *tag, const char *text);
+
+/*
+ * Send a formatted string to the log, used like printf(fmt,...)
+ */
+int __android_log_print(int prio, const char *tag, const char *fmt, ...)
+#if defined(__GNUC__)
+#ifdef __USE_MINGW_ANSI_STDIO
+#if __USE_MINGW_ANSI_STDIO
+ __attribute__ ((format(gnu_printf, 3, 4)))
+#else
+ __attribute__ ((format(printf, 3, 4)))
+#endif
+#else
+ __attribute__ ((format(printf, 3, 4)))
+#endif
+#endif
+ ;
+
+/*
+ * A variant of __android_log_print() that takes a va_list to list
+ * additional parameters.
+ */
+int __android_log_vprint(int prio, const char *tag,
+ const char *fmt, va_list ap);
+
+/*
+ * Log an assertion failure and abort the process to have a chance
+ * to inspect it if a debugger is attached. This uses the FATAL priority.
+ */
+void __android_log_assert(const char *cond, const char *tag,
+ const char *fmt, ...)
+#if defined(__GNUC__)
+ __attribute__ ((noreturn))
+#ifdef __USE_MINGW_ANSI_STDIO
+#if __USE_MINGW_ANSI_STDIO
+ __attribute__ ((format(gnu_printf, 3, 4)))
+#else
+ __attribute__ ((format(printf, 3, 4)))
+#endif
+#else
+ __attribute__ ((format(printf, 3, 4)))
+#endif
+#endif
+ ;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _ANDROID_LOG_H */
diff --git a/include/android/system/core/include/cutils/compiler.h b/include/android/system/core/include/cutils/compiler.h
new file mode 100644
index 00000000..70f884a1
--- /dev/null
+++ b/include/android/system/core/include/cutils/compiler.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2009 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_CUTILS_COMPILER_H
+#define ANDROID_CUTILS_COMPILER_H
+
+/*
+ * helps the compiler's optimizer predicting branches
+ */
+
+#ifdef __cplusplus
+# define CC_LIKELY( exp ) (__builtin_expect( !!(exp), true ))
+# define CC_UNLIKELY( exp ) (__builtin_expect( !!(exp), false ))
+#else
+# define CC_LIKELY( exp ) (__builtin_expect( !!(exp), 1 ))
+# define CC_UNLIKELY( exp ) (__builtin_expect( !!(exp), 0 ))
+#endif
+
+/**
+ * exports marked symbols
+ *
+ * if used on a C++ class declaration, this macro must be inserted
+ * after the "class" keyword. For instance:
+ *
+ * template <typename TYPE>
+ * class ANDROID_API Singleton { }
+ */
+
+#define ANDROID_API __attribute__((visibility("default")))
+
+#endif // ANDROID_CUTILS_COMPILER_H
diff --git a/include/android/system/core/include/cutils/native_handle.h b/include/android/system/core/include/cutils/native_handle.h
new file mode 100644
index 00000000..268c5d3f
--- /dev/null
+++ b/include/android/system/core/include/cutils/native_handle.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2009 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef NATIVE_HANDLE_H_
+#define NATIVE_HANDLE_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct native_handle
+{
+ int version; /* sizeof(native_handle_t) */
+ int numFds; /* number of file-descriptors at &data[0] */
+ int numInts; /* number of ints at &data[numFds] */
+ int data[0]; /* numFds + numInts ints */
+} native_handle_t;
+
+/*
+ * native_handle_close
+ *
+ * closes the file descriptors contained in this native_handle_t
+ *
+ * return 0 on success, or a negative error code on failure
+ *
+ */
+int native_handle_close(const native_handle_t* h);
+
+
+/*
+ * native_handle_create
+ *
+ * creates a native_handle_t and initializes it. must be destroyed with
+ * native_handle_delete().
+ *
+ */
+native_handle_t* native_handle_create(int numFds, int numInts);
+
+/*
+ * native_handle_delete
+ *
+ * frees a native_handle_t allocated with native_handle_create().
+ * This ONLY frees the memory allocated for the native_handle_t, but doesn't
+ * close the file descriptors; which can be achieved with native_handle_close().
+ *
+ * return 0 on success, or a negative error code on failure
+ *
+ */
+int native_handle_delete(native_handle_t* h);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* NATIVE_HANDLE_H_ */
diff --git a/include/android/system/core/include/system/camera.h b/include/android/system/core/include/system/camera.h
new file mode 100644
index 00000000..5d0873ac
--- /dev/null
+++ b/include/android/system/core/include/system/camera.h
@@ -0,0 +1,298 @@
+/*
+ * Copyright (C) 2011 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SYSTEM_CORE_INCLUDE_ANDROID_CAMERA_H
+#define SYSTEM_CORE_INCLUDE_ANDROID_CAMERA_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+#include <cutils/native_handle.h>
+#include <hardware/hardware.h>
+#include <hardware/gralloc.h>
+
+__BEGIN_DECLS
+
+/**
+ * A set of bit masks for specifying how the received preview frames are
+ * handled before the previewCallback() call.
+ *
+ * The least significant 3 bits of an "int" value are used for this purpose:
+ *
+ * ..... 0 0 0
+ * ^ ^ ^
+ * | | |---------> determine whether the callback is enabled or not
+ * | |-----------> determine whether the callback is one-shot or not
+ * |-------------> determine whether the frame is copied out or not
+ *
+ * WARNING: When a frame is sent directly without copying, it is the frame
+ * receiver's responsiblity to make sure that the frame data won't get
+ * corrupted by subsequent preview frames filled by the camera. This flag is
+ * recommended only when copying out data brings significant performance price
+ * and the handling/processing of the received frame data is always faster than
+ * the preview frame rate so that data corruption won't occur.
+ *
+ * For instance,
+ * 1. 0x00 disables the callback. In this case, copy out and one shot bits
+ * are ignored.
+ * 2. 0x01 enables a callback without copying out the received frames. A
+ * typical use case is the Camcorder application to avoid making costly
+ * frame copies.
+ * 3. 0x05 is enabling a callback with frame copied out repeatedly. A typical
+ * use case is the Camera application.
+ * 4. 0x07 is enabling a callback with frame copied out only once. A typical
+ * use case is the Barcode scanner application.
+ */
+
+enum {
+ CAMERA_FRAME_CALLBACK_FLAG_ENABLE_MASK = 0x01,
+ CAMERA_FRAME_CALLBACK_FLAG_ONE_SHOT_MASK = 0x02,
+ CAMERA_FRAME_CALLBACK_FLAG_COPY_OUT_MASK = 0x04,
+ /** Typical use cases */
+ CAMERA_FRAME_CALLBACK_FLAG_NOOP = 0x00,
+ CAMERA_FRAME_CALLBACK_FLAG_CAMCORDER = 0x01,
+ CAMERA_FRAME_CALLBACK_FLAG_CAMERA = 0x05,
+ CAMERA_FRAME_CALLBACK_FLAG_BARCODE_SCANNER = 0x07
+};
+
+/** msgType in notifyCallback and dataCallback functions */
+enum {
+ CAMERA_MSG_ERROR = 0x0001, // notifyCallback
+ CAMERA_MSG_SHUTTER = 0x0002, // notifyCallback
+ CAMERA_MSG_FOCUS = 0x0004, // notifyCallback
+ CAMERA_MSG_ZOOM = 0x0008, // notifyCallback
+ CAMERA_MSG_PREVIEW_FRAME = 0x0010, // dataCallback
+ CAMERA_MSG_VIDEO_FRAME = 0x0020, // data_timestamp_callback
+ CAMERA_MSG_POSTVIEW_FRAME = 0x0040, // dataCallback
+ CAMERA_MSG_RAW_IMAGE = 0x0080, // dataCallback
+ CAMERA_MSG_COMPRESSED_IMAGE = 0x0100, // dataCallback
+ CAMERA_MSG_RAW_IMAGE_NOTIFY = 0x0200, // dataCallback
+ // Preview frame metadata. This can be combined with
+ // CAMERA_MSG_PREVIEW_FRAME in dataCallback. For example, the apps can
+ // request FRAME and METADATA. Or the apps can request only FRAME or only
+ // METADATA.
+ CAMERA_MSG_PREVIEW_METADATA = 0x0400, // dataCallback
+ // Notify on autofocus start and stop. This is useful in continuous
+ // autofocus - FOCUS_MODE_CONTINUOUS_VIDEO and FOCUS_MODE_CONTINUOUS_PICTURE.
+ CAMERA_MSG_FOCUS_MOVE = 0x0800, // notifyCallback
+ CAMERA_MSG_ALL_MSGS = 0xFFFF
+};
+
+/** cmdType in sendCommand functions */
+enum {
+ CAMERA_CMD_START_SMOOTH_ZOOM = 1,
+ CAMERA_CMD_STOP_SMOOTH_ZOOM = 2,
+
+ /**
+ * Set the clockwise rotation of preview display (setPreviewDisplay) in
+ * degrees. This affects the preview frames and the picture displayed after
+ * snapshot. This method is useful for portrait mode applications. Note
+ * that preview display of front-facing cameras is flipped horizontally
+ * before the rotation, that is, the image is reflected along the central
+ * vertical axis of the camera sensor. So the users can see themselves as
+ * looking into a mirror.
+ *
+ * This does not affect the order of byte array of
+ * CAMERA_MSG_PREVIEW_FRAME, CAMERA_MSG_VIDEO_FRAME,
+ * CAMERA_MSG_POSTVIEW_FRAME, CAMERA_MSG_RAW_IMAGE, or
+ * CAMERA_MSG_COMPRESSED_IMAGE. This is allowed to be set during preview
+ * since API level 14.
+ */
+ CAMERA_CMD_SET_DISPLAY_ORIENTATION = 3,
+
+ /**
+ * cmdType to disable/enable shutter sound. In sendCommand passing arg1 =
+ * 0 will disable, while passing arg1 = 1 will enable the shutter sound.
+ */
+ CAMERA_CMD_ENABLE_SHUTTER_SOUND = 4,
+
+ /* cmdType to play recording sound */
+ CAMERA_CMD_PLAY_RECORDING_SOUND = 5,
+
+ /**
+ * Start the face detection. This should be called after preview is started.
+ * The camera will notify the listener of CAMERA_MSG_FACE and the detected
+ * faces in the preview frame. The detected faces may be the same as the
+ * previous ones. Apps should call CAMERA_CMD_STOP_FACE_DETECTION to stop
+ * the face detection. This method is supported if CameraParameters
+ * KEY_MAX_NUM_HW_DETECTED_FACES or KEY_MAX_NUM_SW_DETECTED_FACES is
+ * bigger than 0. Hardware and software face detection should not be running
+ * at the same time. If the face detection has started, apps should not send
+ * this again.
+ *
+ * In hardware face detection mode, CameraParameters KEY_WHITE_BALANCE,
+ * KEY_FOCUS_AREAS and KEY_METERING_AREAS have no effect.
+ *
+ * arg1 is the face detection type. It can be CAMERA_FACE_DETECTION_HW or
+ * CAMERA_FACE_DETECTION_SW. If the type of face detection requested is not
+ * supported, the HAL must return BAD_VALUE.
+ */
+ CAMERA_CMD_START_FACE_DETECTION = 6,
+
+ /**
+ * Stop the face detection.
+ */
+ CAMERA_CMD_STOP_FACE_DETECTION = 7,
+
+ /**
+ * Enable/disable focus move callback (CAMERA_MSG_FOCUS_MOVE). Passing
+ * arg1 = 0 will disable, while passing arg1 = 1 will enable the callback.
+ */
+ CAMERA_CMD_ENABLE_FOCUS_MOVE_MSG = 8,
+
+ /**
+ * Ping camera service to see if camera hardware is released.
+ *
+ * When any camera method returns error, the client can use ping command
+ * to see if the camera has been taken away by other clients. If the result
+ * is NO_ERROR, it means the camera hardware is not released. If the result
+ * is not NO_ERROR, the camera has been released and the existing client
+ * can silently finish itself or show a dialog.
+ */
+ CAMERA_CMD_PING = 9,
+
+ /**
+ * Configure the number of video buffers used for recording. The intended
+ * video buffer count for recording is passed as arg1, which must be
+ * greater than 0. This command must be sent before recording is started.
+ * This command returns INVALID_OPERATION error if it is sent after video
+ * recording is started, or the command is not supported at all. This
+ * command also returns a BAD_VALUE error if the intended video buffer
+ * count is non-positive or too big to be realized.
+ */
+ CAMERA_CMD_SET_VIDEO_BUFFER_COUNT = 10,
+
+ /**
+ * Configure an explicit format to use for video recording metadata mode.
+ * This can be used to switch the format from the
+ * default IMPLEMENTATION_DEFINED gralloc format to some other
+ * device-supported format, and the default dataspace from the BT_709 color
+ * space to some other device-supported dataspace. arg1 is the HAL pixel
+ * format, and arg2 is the HAL dataSpace. This command returns
+ * INVALID_OPERATION error if it is sent after video recording is started,
+ * or the command is not supported at all.
+ *
+ * If the gralloc format is set to a format other than
+ * IMPLEMENTATION_DEFINED, then HALv3 devices will use gralloc usage flags
+ * of SW_READ_OFTEN.
+ */
+ CAMERA_CMD_SET_VIDEO_FORMAT = 11
+};
+
+/** camera fatal errors */
+enum {
+ CAMERA_ERROR_UNKNOWN = 1,
+ /**
+ * Camera was released because another client has connected to the camera.
+ * The original client should call Camera::disconnect immediately after
+ * getting this notification. Otherwise, the camera will be released by
+ * camera service in a short time. The client should not call any method
+ * (except disconnect and sending CAMERA_CMD_PING) after getting this.
+ */
+ CAMERA_ERROR_RELEASED = 2,
+ CAMERA_ERROR_SERVER_DIED = 100
+};
+
+enum {
+ /** The facing of the camera is opposite to that of the screen. */
+ CAMERA_FACING_BACK = 0,
+ /** The facing of the camera is the same as that of the screen. */
+ CAMERA_FACING_FRONT = 1,
+ /**
+ * The facing of the camera is not fixed relative to the screen.
+ * The cameras with this facing are external cameras, e.g. USB cameras.
+ */
+ CAMERA_FACING_EXTERNAL = 2
+};
+
+enum {
+ /** Hardware face detection. It does not use much CPU. */
+ CAMERA_FACE_DETECTION_HW = 0,
+ /**
+ * Software face detection. It uses some CPU. Applications must use
+ * Camera.setPreviewTexture for preview in this mode.
+ */
+ CAMERA_FACE_DETECTION_SW = 1
+};
+
+/**
+ * The information of a face from camera face detection.
+ */
+typedef struct camera_face {
+ /**
+ * Bounds of the face [left, top, right, bottom]. (-1000, -1000) represents
+ * the top-left of the camera field of view, and (1000, 1000) represents the
+ * bottom-right of the field of view. The width and height cannot be 0 or
+ * negative. This is supported by both hardware and software face detection.
+ *
+ * The direction is relative to the sensor orientation, that is, what the
+ * sensor sees. The direction is not affected by the rotation or mirroring
+ * of CAMERA_CMD_SET_DISPLAY_ORIENTATION.
+ */
+ int32_t rect[4];
+
+ /**
+ * The confidence level of the face. The range is 1 to 100. 100 is the
+ * highest confidence. This is supported by both hardware and software
+ * face detection.
+ */
+ int32_t score;
+
+ /**
+ * An unique id per face while the face is visible to the tracker. If
+ * the face leaves the field-of-view and comes back, it will get a new
+ * id. If the value is 0, id is not supported.
+ */
+ int32_t id;
+
+ /**
+ * The coordinates of the center of the left eye. The range is -1000 to
+ * 1000. -2000, -2000 if this is not supported.
+ */
+ int32_t left_eye[2];
+
+ /**
+ * The coordinates of the center of the right eye. The range is -1000 to
+ * 1000. -2000, -2000 if this is not supported.
+ */
+ int32_t right_eye[2];
+
+ /**
+ * The coordinates of the center of the mouth. The range is -1000 to 1000.
+ * -2000, -2000 if this is not supported.
+ */
+ int32_t mouth[2];
+
+} camera_face_t;
+
+/**
+ * The metadata of the frame data.
+ */
+typedef struct camera_frame_metadata {
+ /**
+ * The number of detected faces in the frame.
+ */
+ int32_t number_of_faces;
+
+ /**
+ * An array of the detected faces. The length is number_of_faces.
+ */
+ camera_face_t *faces;
+} camera_frame_metadata_t;
+
+__END_DECLS
+
+#endif /* SYSTEM_CORE_INCLUDE_ANDROID_CAMERA_H */
diff --git a/include/android/system/core/include/system/graphics.h b/include/android/system/core/include/system/graphics.h
new file mode 100644
index 00000000..afd9f7bd
--- /dev/null
+++ b/include/android/system/core/include/system/graphics.h
@@ -0,0 +1,763 @@
+/*
+ * Copyright (C) 2011 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SYSTEM_CORE_INCLUDE_ANDROID_GRAPHICS_H
+#define SYSTEM_CORE_INCLUDE_ANDROID_GRAPHICS_H
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * If the HAL needs to create service threads to handle graphics related
+ * tasks, these threads need to run at HAL_PRIORITY_URGENT_DISPLAY priority
+ * if they can block the main rendering thread in any way.
+ *
+ * the priority of the current thread can be set with:
+ *
+ * #include <sys/resource.h>
+ * setpriority(PRIO_PROCESS, 0, HAL_PRIORITY_URGENT_DISPLAY);
+ *
+ */
+
+#define HAL_PRIORITY_URGENT_DISPLAY (-8)
+
+/**
+ * pixel format definitions
+ */
+
+enum {
+ /*
+ * "linear" color pixel formats:
+ *
+ * When used with ANativeWindow, the dataSpace field describes the color
+ * space of the buffer.
+ *
+ * The color space determines, for example, if the formats are linear or
+ * gamma-corrected; or whether any special operations are performed when
+ * reading or writing into a buffer in one of these formats.
+ */
+ HAL_PIXEL_FORMAT_RGBA_8888 = 1,
+ HAL_PIXEL_FORMAT_RGBX_8888 = 2,
+ HAL_PIXEL_FORMAT_RGB_888 = 3,
+ HAL_PIXEL_FORMAT_RGB_565 = 4,
+ HAL_PIXEL_FORMAT_BGRA_8888 = 5,
+
+ /*
+ * 0x100 - 0x1FF
+ *
+ * This range is reserved for pixel formats that are specific to the HAL
+ * implementation. Implementations can use any value in this range to
+ * communicate video pixel formats between their HAL modules. These formats
+ * must not have an alpha channel. Additionally, an EGLimage created from a
+ * gralloc buffer of one of these formats must be supported for use with the
+ * GL_OES_EGL_image_external OpenGL ES extension.
+ */
+
+ /*
+ * Android YUV format:
+ *
+ * This format is exposed outside of the HAL to software decoders and
+ * applications. EGLImageKHR must support it in conjunction with the
+ * OES_EGL_image_external extension.
+ *
+ * YV12 is a 4:2:0 YCrCb planar format comprised of a WxH Y plane followed
+ * by (W/2) x (H/2) Cr and Cb planes.
+ *
+ * This format assumes
+ * - an even width
+ * - an even height
+ * - a horizontal stride multiple of 16 pixels
+ * - a vertical stride equal to the height
+ *
+ * y_size = stride * height
+ * c_stride = ALIGN(stride/2, 16)
+ * c_size = c_stride * height/2
+ * size = y_size + c_size * 2
+ * cr_offset = y_size
+ * cb_offset = y_size + c_size
+ *
+ * When used with ANativeWindow, the dataSpace field describes the color
+ * space of the buffer.
+ */
+ HAL_PIXEL_FORMAT_YV12 = 0x32315659, // YCrCb 4:2:0 Planar
+
+
+ /*
+ * Android Y8 format:
+ *
+ * This format is exposed outside of the HAL to the framework.
+ * The expected gralloc usage flags are SW_* and HW_CAMERA_*,
+ * and no other HW_ flags will be used.
+ *
+ * Y8 is a YUV planar format comprised of a WxH Y plane,
+ * with each pixel being represented by 8 bits.
+ *
+ * It is equivalent to just the Y plane from YV12.
+ *
+ * This format assumes
+ * - an even width
+ * - an even height
+ * - a horizontal stride multiple of 16 pixels
+ * - a vertical stride equal to the height
+ *
+ * size = stride * height
+ *
+ * When used with ANativeWindow, the dataSpace field describes the color
+ * space of the buffer.
+ */
+ HAL_PIXEL_FORMAT_Y8 = 0x20203859,
+
+ /*
+ * Android Y16 format:
+ *
+ * This format is exposed outside of the HAL to the framework.
+ * The expected gralloc usage flags are SW_* and HW_CAMERA_*,
+ * and no other HW_ flags will be used.
+ *
+ * Y16 is a YUV planar format comprised of a WxH Y plane,
+ * with each pixel being represented by 16 bits.
+ *
+ * It is just like Y8, but has double the bits per pixel (little endian).
+ *
+ * This format assumes
+ * - an even width
+ * - an even height
+ * - a horizontal stride multiple of 16 pixels
+ * - a vertical stride equal to the height
+ * - strides are specified in pixels, not in bytes
+ *
+ * size = stride * height * 2
+ *
+ * When used with ANativeWindow, the dataSpace field describes the color
+ * space of the buffer, except that dataSpace field
+ * HAL_DATASPACE_DEPTH indicates that this buffer contains a depth
+ * image where each sample is a distance value measured by a depth camera,
+ * plus an associated confidence value.
+ */
+ HAL_PIXEL_FORMAT_Y16 = 0x20363159,
+
+ /*
+ * Android RAW sensor format:
+ *
+ * This format is exposed outside of the camera HAL to applications.
+ *
+ * RAW16 is a single-channel, 16-bit, little endian format, typically
+ * representing raw Bayer-pattern images from an image sensor, with minimal
+ * processing.
+ *
+ * The exact pixel layout of the data in the buffer is sensor-dependent, and
+ * needs to be queried from the camera device.
+ *
+ * Generally, not all 16 bits are used; more common values are 10 or 12
+ * bits. If not all bits are used, the lower-order bits are filled first.
+ * All parameters to interpret the raw data (black and white points,
+ * color space, etc) must be queried from the camera device.
+ *
+ * This format assumes
+ * - an even width
+ * - an even height
+ * - a horizontal stride multiple of 16 pixels
+ * - a vertical stride equal to the height
+ * - strides are specified in pixels, not in bytes
+ *
+ * size = stride * height * 2
+ *
+ * This format must be accepted by the gralloc module when used with the
+ * following usage flags:
+ * - GRALLOC_USAGE_HW_CAMERA_*
+ * - GRALLOC_USAGE_SW_*
+ * - GRALLOC_USAGE_RENDERSCRIPT
+ *
+ * When used with ANativeWindow, the dataSpace should be
+ * HAL_DATASPACE_ARBITRARY, as raw image sensor buffers require substantial
+ * extra metadata to define.
+ */
+ HAL_PIXEL_FORMAT_RAW16 = 0x20,
+
+ /*
+ * Android RAW10 format:
+ *
+ * This format is exposed outside of the camera HAL to applications.
+ *
+ * RAW10 is a single-channel, 10-bit per pixel, densely packed in each row,
+ * unprocessed format, usually representing raw Bayer-pattern images coming from
+ * an image sensor.
+ *
+ * In an image buffer with this format, starting from the first pixel of each
+ * row, each 4 consecutive pixels are packed into 5 bytes (40 bits). Each one
+ * of the first 4 bytes contains the top 8 bits of each pixel, The fifth byte
+ * contains the 2 least significant bits of the 4 pixels, the exact layout data
+ * for each 4 consecutive pixels is illustrated below (Pi[j] stands for the jth
+ * bit of the ith pixel):
+ *
+ * bit 7 bit 0
+ * =====|=====|=====|=====|=====|=====|=====|=====|
+ * Byte 0: |P0[9]|P0[8]|P0[7]|P0[6]|P0[5]|P0[4]|P0[3]|P0[2]|
+ * |-----|-----|-----|-----|-----|-----|-----|-----|
+ * Byte 1: |P1[9]|P1[8]|P1[7]|P1[6]|P1[5]|P1[4]|P1[3]|P1[2]|
+ * |-----|-----|-----|-----|-----|-----|-----|-----|
+ * Byte 2: |P2[9]|P2[8]|P2[7]|P2[6]|P2[5]|P2[4]|P2[3]|P2[2]|
+ * |-----|-----|-----|-----|-----|-----|-----|-----|
+ * Byte 3: |P3[9]|P3[8]|P3[7]|P3[6]|P3[5]|P3[4]|P3[3]|P3[2]|
+ * |-----|-----|-----|-----|-----|-----|-----|-----|
+ * Byte 4: |P3[1]|P3[0]|P2[1]|P2[0]|P1[1]|P1[0]|P0[1]|P0[0]|
+ * ===============================================
+ *
+ * This format assumes
+ * - a width multiple of 4 pixels
+ * - an even height
+ * - a vertical stride equal to the height
+ * - strides are specified in bytes, not in pixels
+ *
+ * size = stride * height
+ *
+ * When stride is equal to width * (10 / 8), there will be no padding bytes at
+ * the end of each row, the entire image data is densely packed. When stride is
+ * larger than width * (10 / 8), padding bytes will be present at the end of each
+ * row (including the last row).
+ *
+ * This format must be accepted by the gralloc module when used with the
+ * following usage flags:
+ * - GRALLOC_USAGE_HW_CAMERA_*
+ * - GRALLOC_USAGE_SW_*
+ * - GRALLOC_USAGE_RENDERSCRIPT
+ *
+ * When used with ANativeWindow, the dataSpace field should be
+ * HAL_DATASPACE_ARBITRARY, as raw image sensor buffers require substantial
+ * extra metadata to define.
+ */
+ HAL_PIXEL_FORMAT_RAW10 = 0x25,
+
+ /*
+ * Android RAW12 format:
+ *
+ * This format is exposed outside of camera HAL to applications.
+ *
+ * RAW12 is a single-channel, 12-bit per pixel, densely packed in each row,
+ * unprocessed format, usually representing raw Bayer-pattern images coming from
+ * an image sensor.
+ *
+ * In an image buffer with this format, starting from the first pixel of each
+ * row, each two consecutive pixels are packed into 3 bytes (24 bits). The first
+ * and second byte contains the top 8 bits of first and second pixel. The third
+ * byte contains the 4 least significant bits of the two pixels, the exact layout
+ * data for each two consecutive pixels is illustrated below (Pi[j] stands for
+ * the jth bit of the ith pixel):
+ *
+ * bit 7 bit 0
+ * ======|======|======|======|======|======|======|======|
+ * Byte 0: |P0[11]|P0[10]|P0[ 9]|P0[ 8]|P0[ 7]|P0[ 6]|P0[ 5]|P0[ 4]|
+ * |------|------|------|------|------|------|------|------|
+ * Byte 1: |P1[11]|P1[10]|P1[ 9]|P1[ 8]|P1[ 7]|P1[ 6]|P1[ 5]|P1[ 4]|
+ * |------|------|------|------|------|------|------|------|
+ * Byte 2: |P1[ 3]|P1[ 2]|P1[ 1]|P1[ 0]|P0[ 3]|P0[ 2]|P0[ 1]|P0[ 0]|
+ * =======================================================
+ *
+ * This format assumes:
+ * - a width multiple of 4 pixels
+ * - an even height
+ * - a vertical stride equal to the height
+ * - strides are specified in bytes, not in pixels
+ *
+ * size = stride * height
+ *
+ * When stride is equal to width * (12 / 8), there will be no padding bytes at
+ * the end of each row, the entire image data is densely packed. When stride is
+ * larger than width * (12 / 8), padding bytes will be present at the end of
+ * each row (including the last row).
+ *
+ * This format must be accepted by the gralloc module when used with the
+ * following usage flags:
+ * - GRALLOC_USAGE_HW_CAMERA_*
+ * - GRALLOC_USAGE_SW_*
+ * - GRALLOC_USAGE_RENDERSCRIPT
+ *
+ * When used with ANativeWindow, the dataSpace field should be
+ * HAL_DATASPACE_ARBITRARY, as raw image sensor buffers require substantial
+ * extra metadata to define.
+ */
+ HAL_PIXEL_FORMAT_RAW12 = 0x26,
+
+ /*
+ * Android opaque RAW format:
+ *
+ * This format is exposed outside of the camera HAL to applications.
+ *
+ * RAW_OPAQUE is a format for unprocessed raw image buffers coming from an
+ * image sensor. The actual structure of buffers of this format is
+ * implementation-dependent.
+ *
+ * This format must be accepted by the gralloc module when used with the
+ * following usage flags:
+ * - GRALLOC_USAGE_HW_CAMERA_*
+ * - GRALLOC_USAGE_SW_*
+ * - GRALLOC_USAGE_RENDERSCRIPT
+ *
+ * When used with ANativeWindow, the dataSpace field should be
+ * HAL_DATASPACE_ARBITRARY, as raw image sensor buffers require substantial
+ * extra metadata to define.
+ */
+ HAL_PIXEL_FORMAT_RAW_OPAQUE = 0x24,
+
+ /*
+ * Android binary blob graphics buffer format:
+ *
+ * This format is used to carry task-specific data which does not have a
+ * standard image structure. The details of the format are left to the two
+ * endpoints.
+ *
+ * A typical use case is for transporting JPEG-compressed images from the
+ * Camera HAL to the framework or to applications.
+ *
+ * Buffers of this format must have a height of 1, and width equal to their
+ * size in bytes.
+ *
+ * When used with ANativeWindow, the mapping of the dataSpace field to
+ * buffer contents for BLOB is as follows:
+ *
+ * dataSpace value | Buffer contents
+ * -------------------------------+-----------------------------------------
+ * HAL_DATASPACE_JFIF | An encoded JPEG image
+ * HAL_DATASPACE_DEPTH | An android_depth_points buffer
+ * Other | Unsupported
+ *
+ */
+ HAL_PIXEL_FORMAT_BLOB = 0x21,
+
+ /*
+ * Android format indicating that the choice of format is entirely up to the
+ * device-specific Gralloc implementation.
+ *
+ * The Gralloc implementation should examine the usage bits passed in when
+ * allocating a buffer with this format, and it should derive the pixel
+ * format from those usage flags. This format will never be used with any
+ * of the GRALLOC_USAGE_SW_* usage flags.
+ *
+ * If a buffer of this format is to be used as an OpenGL ES texture, the
+ * framework will assume that sampling the texture will always return an
+ * alpha value of 1.0 (i.e. the buffer contains only opaque pixel values).
+ *
+ * When used with ANativeWindow, the dataSpace field describes the color
+ * space of the buffer.
+ */
+ HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED = 0x22,
+
+ /*
+ * Android flexible YCbCr 4:2:0 formats
+ *
+ * This format allows platforms to use an efficient YCbCr/YCrCb 4:2:0
+ * buffer layout, while still describing the general format in a
+ * layout-independent manner. While called YCbCr, it can be
+ * used to describe formats with either chromatic ordering, as well as
+ * whole planar or semiplanar layouts.
+ *
+ * struct android_ycbcr (below) is the the struct used to describe it.
+ *
+ * This format must be accepted by the gralloc module when
+ * USAGE_SW_WRITE_* or USAGE_SW_READ_* are set.
+ *
+ * This format is locked for use by gralloc's (*lock_ycbcr) method, and
+ * locking with the (*lock) method will return an error.
+ *
+ * When used with ANativeWindow, the dataSpace field describes the color
+ * space of the buffer.
+ */
+ HAL_PIXEL_FORMAT_YCbCr_420_888 = 0x23,
+
+ /*
+ * Android flexible YCbCr 4:2:2 formats
+ *
+ * This format allows platforms to use an efficient YCbCr/YCrCb 4:2:2
+ * buffer layout, while still describing the general format in a
+ * layout-independent manner. While called YCbCr, it can be
+ * used to describe formats with either chromatic ordering, as well as
+ * whole planar or semiplanar layouts.
+ *
+ * This format is currently only used by SW readable buffers
+ * produced by MediaCodecs, so the gralloc module can ignore this format.
+ */
+ HAL_PIXEL_FORMAT_YCbCr_422_888 = 0x27,
+
+ /*
+ * Android flexible YCbCr 4:4:4 formats
+ *
+ * This format allows platforms to use an efficient YCbCr/YCrCb 4:4:4
+ * buffer layout, while still describing the general format in a
+ * layout-independent manner. While called YCbCr, it can be
+ * used to describe formats with either chromatic ordering, as well as
+ * whole planar or semiplanar layouts.
+ *
+ * This format is currently only used by SW readable buffers
+ * produced by MediaCodecs, so the gralloc module can ignore this format.
+ */
+ HAL_PIXEL_FORMAT_YCbCr_444_888 = 0x28,
+
+ /*
+ * Android flexible RGB 888 formats
+ *
+ * This format allows platforms to use an efficient RGB/BGR/RGBX/BGRX
+ * buffer layout, while still describing the general format in a
+ * layout-independent manner. While called RGB, it can be
+ * used to describe formats with either color ordering and optional
+ * padding, as well as whole planar layout.
+ *
+ * This format is currently only used by SW readable buffers
+ * produced by MediaCodecs, so the gralloc module can ignore this format.
+ */
+ HAL_PIXEL_FORMAT_FLEX_RGB_888 = 0x29,
+
+ /*
+ * Android flexible RGBA 8888 formats
+ *
+ * This format allows platforms to use an efficient RGBA/BGRA/ARGB/ABGR
+ * buffer layout, while still describing the general format in a
+ * layout-independent manner. While called RGBA, it can be
+ * used to describe formats with any of the component orderings, as
+ * well as whole planar layout.
+ *
+ * This format is currently only used by SW readable buffers
+ * produced by MediaCodecs, so the gralloc module can ignore this format.
+ */
+ HAL_PIXEL_FORMAT_FLEX_RGBA_8888 = 0x2A,
+
+ /* Legacy formats (deprecated), used by ImageFormat.java */
+ HAL_PIXEL_FORMAT_YCbCr_422_SP = 0x10, // NV16
+ HAL_PIXEL_FORMAT_YCrCb_420_SP = 0x11, // NV21
+ HAL_PIXEL_FORMAT_YCbCr_422_I = 0x14, // YUY2
+};
+
+/*
+ * Structure for describing YCbCr formats for consumption by applications.
+ * This is used with HAL_PIXEL_FORMAT_YCbCr_*_888.
+ *
+ * Buffer chroma subsampling is defined in the format.
+ * e.g. HAL_PIXEL_FORMAT_YCbCr_420_888 has subsampling 4:2:0.
+ *
+ * Buffers must have a 8 bit depth.
+ *
+ * @y, @cb, and @cr point to the first byte of their respective planes.
+ *
+ * Stride describes the distance in bytes from the first value of one row of
+ * the image to the first value of the next row. It includes the width of the
+ * image plus padding.
+ * @ystride is the stride of the luma plane.
+ * @cstride is the stride of the chroma planes.
+ *
+ * @chroma_step is the distance in bytes from one chroma pixel value to the
+ * next. This is 2 bytes for semiplanar (because chroma values are interleaved
+ * and each chroma value is one byte) and 1 for planar.
+ */
+
+struct android_ycbcr {
+ void *y;
+ void *cb;
+ void *cr;
+ size_t ystride;
+ size_t cstride;
+ size_t chroma_step;
+
+ /** reserved for future use, set to 0 by gralloc's (*lock_ycbcr)() */
+ uint32_t reserved[8];
+};
+
+/**
+ * Structure used to define depth point clouds for format HAL_PIXEL_FORMAT_BLOB
+ * with dataSpace value of HAL_DATASPACE_DEPTH.
+ * When locking a native buffer of the above format and dataSpace value,
+ * the vaddr pointer can be cast to this structure.
+ *
+ * A variable-length list of (x,y,z, confidence) 3D points, as floats. (x, y,
+ * z) represents a measured point's position, with the coordinate system defined
+ * by the data source. Confidence represents the estimated likelihood that this
+ * measurement is correct. It is between 0.f and 1.f, inclusive, with 1.f ==
+ * 100% confidence.
+ *
+ * @num_points is the number of points in the list
+ *
+ * @xyz_points is the flexible array of floating-point values.
+ * It contains (num_points) * 4 floats.
+ *
+ * For example:
+ * android_depth_points d = get_depth_buffer();
+ * struct {
+ * float x; float y; float z; float confidence;
+ * } firstPoint, lastPoint;
+ *
+ * firstPoint.x = d.xyzc_points[0];
+ * firstPoint.y = d.xyzc_points[1];
+ * firstPoint.z = d.xyzc_points[2];
+ * firstPoint.confidence = d.xyzc_points[3];
+ * lastPoint.x = d.xyzc_points[(d.num_points - 1) * 4 + 0];
+ * lastPoint.y = d.xyzc_points[(d.num_points - 1) * 4 + 1];
+ * lastPoint.z = d.xyzc_points[(d.num_points - 1) * 4 + 2];
+ * lastPoint.confidence = d.xyzc_points[(d.num_points - 1) * 4 + 3];
+ */
+
+struct android_depth_points {
+ uint32_t num_points;
+
+ /** reserved for future use, set to 0 by gralloc's (*lock)() */
+ uint32_t reserved[8];
+
+ float xyzc_points[];
+};
+
+/**
+ * Transformation definitions
+ *
+ * IMPORTANT NOTE:
+ * HAL_TRANSFORM_ROT_90 is applied CLOCKWISE and AFTER HAL_TRANSFORM_FLIP_{H|V}.
+ *
+ */
+
+enum {
+ /* flip source image horizontally (around the vertical axis) */
+ HAL_TRANSFORM_FLIP_H = 0x01,
+ /* flip source image vertically (around the horizontal axis)*/
+ HAL_TRANSFORM_FLIP_V = 0x02,
+ /* rotate source image 90 degrees clockwise */
+ HAL_TRANSFORM_ROT_90 = 0x04,
+ /* rotate source image 180 degrees */
+ HAL_TRANSFORM_ROT_180 = 0x03,
+ /* rotate source image 270 degrees clockwise */
+ HAL_TRANSFORM_ROT_270 = 0x07,
+ /* don't use. see system/window.h */
+ HAL_TRANSFORM_RESERVED = 0x08,
+};
+
+/**
+ * Dataspace Definitions
+ * ======================
+ *
+ * Dataspace is the definition of how pixel values should be interpreted.
+ *
+ * For many formats, this is the colorspace of the image data, which includes
+ * primaries (including white point) and the transfer characteristic function,
+ * which describes both gamma curve and numeric range (within the bit depth).
+ *
+ * Other dataspaces include depth measurement data from a depth camera.
+ */
+
+typedef enum android_dataspace {
+ /*
+ * Default-assumption data space, when not explicitly specified.
+ *
+ * It is safest to assume the buffer is an image with sRGB primaries and
+ * encoding ranges, but the consumer and/or the producer of the data may
+ * simply be using defaults. No automatic gamma transform should be
+ * expected, except for a possible display gamma transform when drawn to a
+ * screen.
+ */
+ HAL_DATASPACE_UNKNOWN = 0x0,
+
+ /*
+ * Arbitrary dataspace with manually defined characteristics. Definition
+ * for colorspaces or other meaning must be communicated separately.
+ *
+ * This is used when specifying primaries, transfer characteristics,
+ * etc. separately.
+ *
+ * A typical use case is in video encoding parameters (e.g. for H.264),
+ * where a colorspace can have separately defined primaries, transfer
+ * characteristics, etc.
+ */
+ HAL_DATASPACE_ARBITRARY = 0x1,
+
+ /*
+ * RGB Colorspaces
+ * -----------------
+ *
+ * Primaries are given using (x,y) coordinates in the CIE 1931 definition
+ * of x and y specified by ISO 11664-1.
+ *
+ * Transfer characteristics are the opto-electronic transfer characteristic
+ * at the source as a function of linear optical intensity (luminance).
+ */
+
+ /*
+ * sRGB linear encoding:
+ *
+ * The red, green, and blue components are stored in sRGB space, but
+ * are linear, not gamma-encoded.
+ * The RGB primaries and the white point are the same as BT.709.
+ *
+ * The values are encoded using the full range ([0,255] for 8-bit) for all
+ * components.
+ */
+ HAL_DATASPACE_SRGB_LINEAR = 0x200,
+
+ /*
+ * sRGB gamma encoding:
+ *
+ * The red, green and blue components are stored in sRGB space, and
+ * converted to linear space when read, using the standard sRGB to linear
+ * equation:
+ *
+ * Clinear = Csrgb / 12.92 for Csrgb <= 0.04045
+ * = (Csrgb + 0.055 / 1.055)^2.4 for Csrgb > 0.04045
+ *
+ * When written the inverse transformation is performed:
+ *
+ * Csrgb = 12.92 * Clinear for Clinear <= 0.0031308
+ * = 1.055 * Clinear^(1/2.4) - 0.055 for Clinear > 0.0031308
+ *
+ *
+ * The alpha component, if present, is always stored in linear space and
+ * is left unmodified when read or written.
+ *
+ * The RGB primaries and the white point are the same as BT.709.
+ *
+ * The values are encoded using the full range ([0,255] for 8-bit) for all
+ * components.
+ *
+ */
+ HAL_DATASPACE_SRGB = 0x201,
+
+ /*
+ * YCbCr Colorspaces
+ * -----------------
+ *
+ * Primaries are given using (x,y) coordinates in the CIE 1931 definition
+ * of x and y specified by ISO 11664-1.
+ *
+ * Transfer characteristics are the opto-electronic transfer characteristic
+ * at the source as a function of linear optical intensity (luminance).
+ */
+
+ /*
+ * JPEG File Interchange Format (JFIF)
+ *
+ * Same model as BT.601-625, but all values (Y, Cb, Cr) range from 0 to 255
+ *
+ * Transfer characteristic curve:
+ * E = 1.099 * L ^ 0.45 - 0.099, 1.00 >= L >= 0.018
+ * E = 4.500 L, 0.018 > L >= 0
+ * L - luminance of image 0 <= L <= 1 for conventional colorimetry
+ * E - corresponding electrical signal
+ *
+ * Primaries: x y
+ * green 0.290 0.600
+ * blue 0.150 0.060
+ * red 0.640 0.330
+ * white (D65) 0.3127 0.3290
+ */
+ HAL_DATASPACE_JFIF = 0x101,
+
+ /*
+ * ITU-R Recommendation 601 (BT.601) - 625-line
+ *
+ * Standard-definition television, 625 Lines (PAL)
+ *
+ * For 8-bit-depth formats:
+ * Luma (Y) samples should range from 16 to 235, inclusive
+ * Chroma (Cb, Cr) samples should range from 16 to 240, inclusive
+ *
+ * For 10-bit-depth formats:
+ * Luma (Y) samples should range from 64 to 940, inclusive
+ * Chroma (Cb, Cr) samples should range from 64 to 960, inclusive
+ *
+ * Transfer characteristic curve:
+ * E = 1.099 * L ^ 0.45 - 0.099, 1.00 >= L >= 0.018
+ * E = 4.500 L, 0.018 > L >= 0
+ * L - luminance of image 0 <= L <= 1 for conventional colorimetry
+ * E - corresponding electrical signal
+ *
+ * Primaries: x y
+ * green 0.290 0.600
+ * blue 0.150 0.060
+ * red 0.640 0.330
+ * white (D65) 0.3127 0.3290
+ */
+ HAL_DATASPACE_BT601_625 = 0x102,
+
+ /*
+ * ITU-R Recommendation 601 (BT.601) - 525-line
+ *
+ * Standard-definition television, 525 Lines (NTSC)
+ *
+ * For 8-bit-depth formats:
+ * Luma (Y) samples should range from 16 to 235, inclusive
+ * Chroma (Cb, Cr) samples should range from 16 to 240, inclusive
+ *
+ * For 10-bit-depth formats:
+ * Luma (Y) samples should range from 64 to 940, inclusive
+ * Chroma (Cb, Cr) samples should range from 64 to 960, inclusive
+ *
+ * Transfer characteristic curve:
+ * E = 1.099 * L ^ 0.45 - 0.099, 1.00 >= L >= 0.018
+ * E = 4.500 L, 0.018 > L >= 0
+ * L - luminance of image 0 <= L <= 1 for conventional colorimetry
+ * E - corresponding electrical signal
+ *
+ * Primaries: x y
+ * green 0.310 0.595
+ * blue 0.155 0.070
+ * red 0.630 0.340
+ * white (D65) 0.3127 0.3290
+ */
+ HAL_DATASPACE_BT601_525 = 0x103,
+
+ /*
+ * ITU-R Recommendation 709 (BT.709)
+ *
+ * High-definition television
+ *
+ * For 8-bit-depth formats:
+ * Luma (Y) samples should range from 16 to 235, inclusive
+ * Chroma (Cb, Cr) samples should range from 16 to 240, inclusive
+ *
+ * For 10-bit-depth formats:
+ * Luma (Y) samples should range from 64 to 940, inclusive
+ * Chroma (Cb, Cr) samples should range from 64 to 960, inclusive
+ *
+ * Primaries: x y
+ * green 0.300 0.600
+ * blue 0.150 0.060
+ * red 0.640 0.330
+ * white (D65) 0.3127 0.3290
+ */
+ HAL_DATASPACE_BT709 = 0x104,
+
+ /*
+ * The buffer contains depth ranging measurements from a depth camera.
+ * This value is valid with formats:
+ * HAL_PIXEL_FORMAT_Y16: 16-bit samples, consisting of a depth measurement
+ * and an associated confidence value. The 3 MSBs of the sample make
+ * up the confidence value, and the low 13 LSBs of the sample make up
+ * the depth measurement.
+ * For the confidence section, 0 means 100% confidence, 1 means 0%
+ * confidence. The mapping to a linear float confidence value between
+ * 0.f and 1.f can be obtained with
+ * float confidence = (((depthSample >> 13) - 1) & 0x7) / 7.0f;
+ * The depth measurement can be extracted simply with
+ * uint16_t range = (depthSample & 0x1FFF);
+ * HAL_PIXEL_FORMAT_BLOB: A depth point cloud, as
+ * a variable-length float (x,y,z, confidence) coordinate point list.
+ * The point cloud will be represented with the android_depth_points
+ * structure.
+ */
+ HAL_DATASPACE_DEPTH = 0x1000
+
+} android_dataspace_t;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SYSTEM_CORE_INCLUDE_ANDROID_GRAPHICS_H */
diff --git a/include/android/system/core/include/system/window.h b/include/android/system/core/include/system/window.h
new file mode 100644
index 00000000..508ce00b
--- /dev/null
+++ b/include/android/system/core/include/system/window.h
@@ -0,0 +1,954 @@
+/*
+ * Copyright (C) 2011 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef SYSTEM_CORE_INCLUDE_ANDROID_WINDOW_H
+#define SYSTEM_CORE_INCLUDE_ANDROID_WINDOW_H
+
+#include <cutils/native_handle.h>
+#include <errno.h>
+#include <limits.h>
+#include <stdint.h>
+#include <string.h>
+#include <sys/cdefs.h>
+#include <system/graphics.h>
+#include <unistd.h>
+
+#ifndef __UNUSED
+#define __UNUSED __attribute__((__unused__))
+#endif
+#ifndef __deprecated
+#define __deprecated __attribute__((__deprecated__))
+#endif
+
+__BEGIN_DECLS
+
+/*****************************************************************************/
+
+#define ANDROID_NATIVE_MAKE_CONSTANT(a,b,c,d) \
+ (((unsigned)(a)<<24)|((unsigned)(b)<<16)|((unsigned)(c)<<8)|(unsigned)(d))
+
+#define ANDROID_NATIVE_WINDOW_MAGIC \
+ ANDROID_NATIVE_MAKE_CONSTANT('_','w','n','d')
+
+#define ANDROID_NATIVE_BUFFER_MAGIC \
+ ANDROID_NATIVE_MAKE_CONSTANT('_','b','f','r')
+
+// ---------------------------------------------------------------------------
+
+// This #define may be used to conditionally compile device-specific code to
+// support either the prior ANativeWindow interface, which did not pass libsync
+// fences around, or the new interface that does. This #define is only present
+// when the ANativeWindow interface does include libsync support.
+#define ANDROID_NATIVE_WINDOW_HAS_SYNC 1
+
+// ---------------------------------------------------------------------------
+
+typedef const native_handle_t* buffer_handle_t;
+
+// ---------------------------------------------------------------------------
+
+typedef struct android_native_rect_t
+{
+ int32_t left;
+ int32_t top;
+ int32_t right;
+ int32_t bottom;
+} android_native_rect_t;
+
+// ---------------------------------------------------------------------------
+
+typedef struct android_native_base_t
+{
+ /* a magic value defined by the actual EGL native type */
+ int magic;
+
+ /* the sizeof() of the actual EGL native type */
+ int version;
+
+ void* reserved[4];
+
+ /* reference-counting interface */
+ void (*incRef)(struct android_native_base_t* base);
+ void (*decRef)(struct android_native_base_t* base);
+} android_native_base_t;
+
+typedef struct ANativeWindowBuffer
+{
+#ifdef __cplusplus
+ ANativeWindowBuffer() {
+ common.magic = ANDROID_NATIVE_BUFFER_MAGIC;
+ common.version = sizeof(ANativeWindowBuffer);
+ memset(common.reserved, 0, sizeof(common.reserved));
+ }
+
+ // Implement the methods that sp<ANativeWindowBuffer> expects so that it
+ // can be used to automatically refcount ANativeWindowBuffer's.
+ void incStrong(const void* /*id*/) const {
+ common.incRef(const_cast<android_native_base_t*>(&common));
+ }
+ void decStrong(const void* /*id*/) const {
+ common.decRef(const_cast<android_native_base_t*>(&common));
+ }
+#endif
+
+ struct android_native_base_t common;
+
+ int width;
+ int height;
+ int stride;
+ int format;
+ int usage;
+
+ void* reserved[2];
+
+ buffer_handle_t handle;
+
+ void* reserved_proc[8];
+} ANativeWindowBuffer_t;
+
+// Old typedef for backwards compatibility.
+typedef ANativeWindowBuffer_t android_native_buffer_t;
+
+// ---------------------------------------------------------------------------
+
+/* attributes queriable with query() */
+enum {
+ NATIVE_WINDOW_WIDTH = 0,
+ NATIVE_WINDOW_HEIGHT = 1,
+ NATIVE_WINDOW_FORMAT = 2,
+
+ /* The minimum number of buffers that must remain un-dequeued after a buffer
+ * has been queued. This value applies only if set_buffer_count was used to
+ * override the number of buffers and if a buffer has since been queued.
+ * Users of the set_buffer_count ANativeWindow method should query this
+ * value before calling set_buffer_count. If it is necessary to have N
+ * buffers simultaneously dequeued as part of the steady-state operation,
+ * and this query returns M then N+M buffers should be requested via
+ * native_window_set_buffer_count.
+ *
+ * Note that this value does NOT apply until a single buffer has been
+ * queued. In particular this means that it is possible to:
+ *
+ * 1. Query M = min undequeued buffers
+ * 2. Set the buffer count to N + M
+ * 3. Dequeue all N + M buffers
+ * 4. Cancel M buffers
+ * 5. Queue, dequeue, queue, dequeue, ad infinitum
+ */
+ NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS = 3,
+
+ /* Check whether queueBuffer operations on the ANativeWindow send the buffer
+ * to the window compositor. The query sets the returned 'value' argument
+ * to 1 if the ANativeWindow DOES send queued buffers directly to the window
+ * compositor and 0 if the buffers do not go directly to the window
+ * compositor.
+ *
+ * This can be used to determine whether protected buffer content should be
+ * sent to the ANativeWindow. Note, however, that a result of 1 does NOT
+ * indicate that queued buffers will be protected from applications or users
+ * capturing their contents. If that behavior is desired then some other
+ * mechanism (e.g. the GRALLOC_USAGE_PROTECTED flag) should be used in
+ * conjunction with this query.
+ */
+ NATIVE_WINDOW_QUEUES_TO_WINDOW_COMPOSER = 4,
+
+ /* Get the concrete type of a ANativeWindow. See below for the list of
+ * possible return values.
+ *
+ * This query should not be used outside the Android framework and will
+ * likely be removed in the near future.
+ */
+ NATIVE_WINDOW_CONCRETE_TYPE = 5,
+
+
+ /*
+ * Default width and height of ANativeWindow buffers, these are the
+ * dimensions of the window buffers irrespective of the
+ * NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS call and match the native window
+ * size unless overridden by NATIVE_WINDOW_SET_BUFFERS_USER_DIMENSIONS.
+ */
+ NATIVE_WINDOW_DEFAULT_WIDTH = 6,
+ NATIVE_WINDOW_DEFAULT_HEIGHT = 7,
+
+ /*
+ * transformation that will most-likely be applied to buffers. This is only
+ * a hint, the actual transformation applied might be different.
+ *
+ * INTENDED USE:
+ *
+ * The transform hint can be used by a producer, for instance the GLES
+ * driver, to pre-rotate the rendering such that the final transformation
+ * in the composer is identity. This can be very useful when used in
+ * conjunction with the h/w composer HAL, in situations where it
+ * cannot handle arbitrary rotations.
+ *
+ * 1. Before dequeuing a buffer, the GL driver (or any other ANW client)
+ * queries the ANW for NATIVE_WINDOW_TRANSFORM_HINT.
+ *
+ * 2. The GL driver overrides the width and height of the ANW to
+ * account for NATIVE_WINDOW_TRANSFORM_HINT. This is done by querying
+ * NATIVE_WINDOW_DEFAULT_{WIDTH | HEIGHT}, swapping the dimensions
+ * according to NATIVE_WINDOW_TRANSFORM_HINT and calling
+ * native_window_set_buffers_dimensions().
+ *
+ * 3. The GL driver dequeues a buffer of the new pre-rotated size.
+ *
+ * 4. The GL driver renders to the buffer such that the image is
+ * already transformed, that is applying NATIVE_WINDOW_TRANSFORM_HINT
+ * to the rendering.
+ *
+ * 5. The GL driver calls native_window_set_transform to apply
+ * inverse transformation to the buffer it just rendered.
+ * In order to do this, the GL driver needs
+ * to calculate the inverse of NATIVE_WINDOW_TRANSFORM_HINT, this is
+ * done easily:
+ *
+ * int hintTransform, inverseTransform;
+ * query(..., NATIVE_WINDOW_TRANSFORM_HINT, &hintTransform);
+ * inverseTransform = hintTransform;
+ * if (hintTransform & HAL_TRANSFORM_ROT_90)
+ * inverseTransform ^= HAL_TRANSFORM_ROT_180;
+ *
+ *
+ * 6. The GL driver queues the pre-transformed buffer.
+ *
+ * 7. The composer combines the buffer transform with the display
+ * transform. If the buffer transform happens to cancel out the
+ * display transform then no rotation is needed.
+ *
+ */
+ NATIVE_WINDOW_TRANSFORM_HINT = 8,
+
+ /*
+ * Boolean that indicates whether the consumer is running more than
+ * one buffer behind the producer.
+ */
+ NATIVE_WINDOW_CONSUMER_RUNNING_BEHIND = 9,
+
+ /*
+ * The consumer gralloc usage bits currently set by the consumer.
+ * The values are defined in hardware/libhardware/include/gralloc.h.
+ */
+ NATIVE_WINDOW_CONSUMER_USAGE_BITS = 10,
+
+ /**
+ * Transformation that will by applied to buffers by the hwcomposer.
+ * This must not be set or checked by producer endpoints, and will
+ * disable the transform hint set in SurfaceFlinger (see
+ * NATIVE_WINDOW_TRANSFORM_HINT).
+ *
+ * INTENDED USE:
+ * Temporary - Please do not use this. This is intended only to be used
+ * by the camera's LEGACY mode.
+ *
+ * In situations where a SurfaceFlinger client wishes to set a transform
+ * that is not visible to the producer, and will always be applied in the
+ * hardware composer, the client can set this flag with
+ * native_window_set_buffers_sticky_transform. This can be used to rotate
+ * and flip buffers consumed by hardware composer without actually changing
+ * the aspect ratio of the buffers produced.
+ */
+ NATIVE_WINDOW_STICKY_TRANSFORM = 11,
+
+ /**
+ * The default data space for the buffers as set by the consumer.
+ * The values are defined in graphics.h.
+ */
+ NATIVE_WINDOW_DEFAULT_DATASPACE = 12,
+
+ /*
+ * Returns the age of the contents of the most recently dequeued buffer as
+ * the number of frames that have elapsed since it was last queued. For
+ * example, if the window is double-buffered, the age of any given buffer in
+ * steady state will be 2. If the dequeued buffer has never been queued, its
+ * age will be 0.
+ */
+ NATIVE_WINDOW_BUFFER_AGE = 13,
+};
+
+/* Valid operations for the (*perform)() hook.
+ *
+ * Values marked as 'deprecated' are supported, but have been superceded by
+ * other functionality.
+ *
+ * Values marked as 'private' should be considered private to the framework.
+ * HAL implementation code with access to an ANativeWindow should not use these,
+ * as it may not interact properly with the framework's use of the
+ * ANativeWindow.
+ */
+enum {
+ NATIVE_WINDOW_SET_USAGE = 0,
+ NATIVE_WINDOW_CONNECT = 1, /* deprecated */
+ NATIVE_WINDOW_DISCONNECT = 2, /* deprecated */
+ NATIVE_WINDOW_SET_CROP = 3, /* private */
+ NATIVE_WINDOW_SET_BUFFER_COUNT = 4,
+ NATIVE_WINDOW_SET_BUFFERS_GEOMETRY = 5, /* deprecated */
+ NATIVE_WINDOW_SET_BUFFERS_TRANSFORM = 6,
+ NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP = 7,
+ NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS = 8,
+ NATIVE_WINDOW_SET_BUFFERS_FORMAT = 9,
+ NATIVE_WINDOW_SET_SCALING_MODE = 10, /* private */
+ NATIVE_WINDOW_LOCK = 11, /* private */
+ NATIVE_WINDOW_UNLOCK_AND_POST = 12, /* private */
+ NATIVE_WINDOW_API_CONNECT = 13, /* private */
+ NATIVE_WINDOW_API_DISCONNECT = 14, /* private */
+ NATIVE_WINDOW_SET_BUFFERS_USER_DIMENSIONS = 15, /* private */
+ NATIVE_WINDOW_SET_POST_TRANSFORM_CROP = 16, /* private */
+ NATIVE_WINDOW_SET_BUFFERS_STICKY_TRANSFORM = 17,/* private */
+ NATIVE_WINDOW_SET_SIDEBAND_STREAM = 18,
+ NATIVE_WINDOW_SET_BUFFERS_DATASPACE = 19,
+ NATIVE_WINDOW_SET_SURFACE_DAMAGE = 20, /* private */
+};
+
+/* parameter for NATIVE_WINDOW_[API_][DIS]CONNECT */
+enum {
+ /* Buffers will be queued by EGL via eglSwapBuffers after being filled using
+ * OpenGL ES.
+ */
+ NATIVE_WINDOW_API_EGL = 1,
+
+ /* Buffers will be queued after being filled using the CPU
+ */
+ NATIVE_WINDOW_API_CPU = 2,
+
+ /* Buffers will be queued by Stagefright after being filled by a video
+ * decoder. The video decoder can either be a software or hardware decoder.
+ */
+ NATIVE_WINDOW_API_MEDIA = 3,
+
+ /* Buffers will be queued by the the camera HAL.
+ */
+ NATIVE_WINDOW_API_CAMERA = 4,
+};
+
+/* parameter for NATIVE_WINDOW_SET_BUFFERS_TRANSFORM */
+enum {
+ /* flip source image horizontally */
+ NATIVE_WINDOW_TRANSFORM_FLIP_H = HAL_TRANSFORM_FLIP_H ,
+ /* flip source image vertically */
+ NATIVE_WINDOW_TRANSFORM_FLIP_V = HAL_TRANSFORM_FLIP_V,
+ /* rotate source image 90 degrees clock-wise, and is applied after TRANSFORM_FLIP_{H|V} */
+ NATIVE_WINDOW_TRANSFORM_ROT_90 = HAL_TRANSFORM_ROT_90,
+ /* rotate source image 180 degrees */
+ NATIVE_WINDOW_TRANSFORM_ROT_180 = HAL_TRANSFORM_ROT_180,
+ /* rotate source image 270 degrees clock-wise */
+ NATIVE_WINDOW_TRANSFORM_ROT_270 = HAL_TRANSFORM_ROT_270,
+ /* transforms source by the inverse transform of the screen it is displayed onto. This
+ * transform is applied last */
+ NATIVE_WINDOW_TRANSFORM_INVERSE_DISPLAY = 0x08
+};
+
+/* parameter for NATIVE_WINDOW_SET_SCALING_MODE */
+enum {
+ /* the window content is not updated (frozen) until a buffer of
+ * the window size is received (enqueued)
+ */
+ NATIVE_WINDOW_SCALING_MODE_FREEZE = 0,
+ /* the buffer is scaled in both dimensions to match the window size */
+ NATIVE_WINDOW_SCALING_MODE_SCALE_TO_WINDOW = 1,
+ /* the buffer is scaled uniformly such that the smaller dimension
+ * of the buffer matches the window size (cropping in the process)
+ */
+ NATIVE_WINDOW_SCALING_MODE_SCALE_CROP = 2,
+ /* the window is clipped to the size of the buffer's crop rectangle; pixels
+ * outside the crop rectangle are treated as if they are completely
+ * transparent.
+ */
+ NATIVE_WINDOW_SCALING_MODE_NO_SCALE_CROP = 3,
+};
+
+/* values returned by the NATIVE_WINDOW_CONCRETE_TYPE query */
+enum {
+ NATIVE_WINDOW_FRAMEBUFFER = 0, /* FramebufferNativeWindow */
+ NATIVE_WINDOW_SURFACE = 1, /* Surface */
+};
+
+/* parameter for NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP
+ *
+ * Special timestamp value to indicate that timestamps should be auto-generated
+ * by the native window when queueBuffer is called. This is equal to INT64_MIN,
+ * defined directly to avoid problems with C99/C++ inclusion of stdint.h.
+ */
+static const int64_t NATIVE_WINDOW_TIMESTAMP_AUTO = (-9223372036854775807LL-1);
+
+struct ANativeWindow
+{
+#ifdef __cplusplus
+ ANativeWindow()
+ : flags(0), minSwapInterval(0), maxSwapInterval(0), xdpi(0), ydpi(0)
+ {
+ common.magic = ANDROID_NATIVE_WINDOW_MAGIC;
+ common.version = sizeof(ANativeWindow);
+ memset(common.reserved, 0, sizeof(common.reserved));
+ }
+
+ /* Implement the methods that sp<ANativeWindow> expects so that it
+ can be used to automatically refcount ANativeWindow's. */
+ void incStrong(const void* /*id*/) const {
+ common.incRef(const_cast<android_native_base_t*>(&common));
+ }
+ void decStrong(const void* /*id*/) const {
+ common.decRef(const_cast<android_native_base_t*>(&common));
+ }
+#endif
+
+ struct android_native_base_t common;
+
+ /* flags describing some attributes of this surface or its updater */
+ const uint32_t flags;
+
+ /* min swap interval supported by this updated */
+ const int minSwapInterval;
+
+ /* max swap interval supported by this updated */
+ const int maxSwapInterval;
+
+ /* horizontal and vertical resolution in DPI */
+ const float xdpi;
+ const float ydpi;
+
+ /* Some storage reserved for the OEM's driver. */
+ intptr_t oem[4];
+
+ /*
+ * Set the swap interval for this surface.
+ *
+ * Returns 0 on success or -errno on error.
+ */
+ int (*setSwapInterval)(struct ANativeWindow* window,
+ int interval);
+
+ /*
+ * Hook called by EGL to acquire a buffer. After this call, the buffer
+ * is not locked, so its content cannot be modified. This call may block if
+ * no buffers are available.
+ *
+ * The window holds a reference to the buffer between dequeueBuffer and
+ * either queueBuffer or cancelBuffer, so clients only need their own
+ * reference if they might use the buffer after queueing or canceling it.
+ * Holding a reference to a buffer after queueing or canceling it is only
+ * allowed if a specific buffer count has been set.
+ *
+ * Returns 0 on success or -errno on error.
+ *
+ * XXX: This function is deprecated. It will continue to work for some
+ * time for binary compatibility, but the new dequeueBuffer function that
+ * outputs a fence file descriptor should be used in its place.
+ */
+ int (*dequeueBuffer_DEPRECATED)(struct ANativeWindow* window,
+ struct ANativeWindowBuffer** buffer);
+
+ /*
+ * hook called by EGL to lock a buffer. This MUST be called before modifying
+ * the content of a buffer. The buffer must have been acquired with
+ * dequeueBuffer first.
+ *
+ * Returns 0 on success or -errno on error.
+ *
+ * XXX: This function is deprecated. It will continue to work for some
+ * time for binary compatibility, but it is essentially a no-op, and calls
+ * to it should be removed.
+ */
+ int (*lockBuffer_DEPRECATED)(struct ANativeWindow* window,
+ struct ANativeWindowBuffer* buffer);
+
+ /*
+ * Hook called by EGL when modifications to the render buffer are done.
+ * This unlocks and post the buffer.
+ *
+ * The window holds a reference to the buffer between dequeueBuffer and
+ * either queueBuffer or cancelBuffer, so clients only need their own
+ * reference if they might use the buffer after queueing or canceling it.
+ * Holding a reference to a buffer after queueing or canceling it is only
+ * allowed if a specific buffer count has been set.
+ *
+ * Buffers MUST be queued in the same order than they were dequeued.
+ *
+ * Returns 0 on success or -errno on error.
+ *
+ * XXX: This function is deprecated. It will continue to work for some
+ * time for binary compatibility, but the new queueBuffer function that
+ * takes a fence file descriptor should be used in its place (pass a value
+ * of -1 for the fence file descriptor if there is no valid one to pass).
+ */
+ int (*queueBuffer_DEPRECATED)(struct ANativeWindow* window,
+ struct ANativeWindowBuffer* buffer);
+
+ /*
+ * hook used to retrieve information about the native window.
+ *
+ * Returns 0 on success or -errno on error.
+ */
+ int (*query)(const struct ANativeWindow* window,
+ int what, int* value);
+
+ /*
+ * hook used to perform various operations on the surface.
+ * (*perform)() is a generic mechanism to add functionality to
+ * ANativeWindow while keeping backward binary compatibility.
+ *
+ * DO NOT CALL THIS HOOK DIRECTLY. Instead, use the helper functions
+ * defined below.
+ *
+ * (*perform)() returns -ENOENT if the 'what' parameter is not supported
+ * by the surface's implementation.
+ *
+ * See above for a list of valid operations, such as
+ * NATIVE_WINDOW_SET_USAGE or NATIVE_WINDOW_CONNECT
+ */
+ int (*perform)(struct ANativeWindow* window,
+ int operation, ... );
+
+ /*
+ * Hook used to cancel a buffer that has been dequeued.
+ * No synchronization is performed between dequeue() and cancel(), so
+ * either external synchronization is needed, or these functions must be
+ * called from the same thread.
+ *
+ * The window holds a reference to the buffer between dequeueBuffer and
+ * either queueBuffer or cancelBuffer, so clients only need their own
+ * reference if they might use the buffer after queueing or canceling it.
+ * Holding a reference to a buffer after queueing or canceling it is only
+ * allowed if a specific buffer count has been set.
+ *
+ * XXX: This function is deprecated. It will continue to work for some
+ * time for binary compatibility, but the new cancelBuffer function that
+ * takes a fence file descriptor should be used in its place (pass a value
+ * of -1 for the fence file descriptor if there is no valid one to pass).
+ */
+ int (*cancelBuffer_DEPRECATED)(struct ANativeWindow* window,
+ struct ANativeWindowBuffer* buffer);
+
+ /*
+ * Hook called by EGL to acquire a buffer. This call may block if no
+ * buffers are available.
+ *
+ * The window holds a reference to the buffer between dequeueBuffer and
+ * either queueBuffer or cancelBuffer, so clients only need their own
+ * reference if they might use the buffer after queueing or canceling it.
+ * Holding a reference to a buffer after queueing or canceling it is only
+ * allowed if a specific buffer count has been set.
+ *
+ * The libsync fence file descriptor returned in the int pointed to by the
+ * fenceFd argument will refer to the fence that must signal before the
+ * dequeued buffer may be written to. A value of -1 indicates that the
+ * caller may access the buffer immediately without waiting on a fence. If
+ * a valid file descriptor is returned (i.e. any value except -1) then the
+ * caller is responsible for closing the file descriptor.
+ *
+ * Returns 0 on success or -errno on error.
+ */
+ int (*dequeueBuffer)(struct ANativeWindow* window,
+ struct ANativeWindowBuffer** buffer, int* fenceFd);
+
+ /*
+ * Hook called by EGL when modifications to the render buffer are done.
+ * This unlocks and post the buffer.
+ *
+ * The window holds a reference to the buffer between dequeueBuffer and
+ * either queueBuffer or cancelBuffer, so clients only need their own
+ * reference if they might use the buffer after queueing or canceling it.
+ * Holding a reference to a buffer after queueing or canceling it is only
+ * allowed if a specific buffer count has been set.
+ *
+ * The fenceFd argument specifies a libsync fence file descriptor for a
+ * fence that must signal before the buffer can be accessed. If the buffer
+ * can be accessed immediately then a value of -1 should be used. The
+ * caller must not use the file descriptor after it is passed to
+ * queueBuffer, and the ANativeWindow implementation is responsible for
+ * closing it.
+ *
+ * Returns 0 on success or -errno on error.
+ */
+ int (*queueBuffer)(struct ANativeWindow* window,
+ struct ANativeWindowBuffer* buffer, int fenceFd);
+
+ /*
+ * Hook used to cancel a buffer that has been dequeued.
+ * No synchronization is performed between dequeue() and cancel(), so
+ * either external synchronization is needed, or these functions must be
+ * called from the same thread.
+ *
+ * The window holds a reference to the buffer between dequeueBuffer and
+ * either queueBuffer or cancelBuffer, so clients only need their own
+ * reference if they might use the buffer after queueing or canceling it.
+ * Holding a reference to a buffer after queueing or canceling it is only
+ * allowed if a specific buffer count has been set.
+ *
+ * The fenceFd argument specifies a libsync fence file decsriptor for a
+ * fence that must signal before the buffer can be accessed. If the buffer
+ * can be accessed immediately then a value of -1 should be used.
+ *
+ * Note that if the client has not waited on the fence that was returned
+ * from dequeueBuffer, that same fence should be passed to cancelBuffer to
+ * ensure that future uses of the buffer are preceded by a wait on that
+ * fence. The caller must not use the file descriptor after it is passed
+ * to cancelBuffer, and the ANativeWindow implementation is responsible for
+ * closing it.
+ *
+ * Returns 0 on success or -errno on error.
+ */
+ int (*cancelBuffer)(struct ANativeWindow* window,
+ struct ANativeWindowBuffer* buffer, int fenceFd);
+};
+
+ /* Backwards compatibility: use ANativeWindow (struct ANativeWindow in C).
+ * android_native_window_t is deprecated.
+ */
+typedef struct ANativeWindow ANativeWindow;
+typedef struct ANativeWindow android_native_window_t __deprecated;
+
+/*
+ * native_window_set_usage(..., usage)
+ * Sets the intended usage flags for the next buffers
+ * acquired with (*lockBuffer)() and on.
+ * By default (if this function is never called), a usage of
+ * GRALLOC_USAGE_HW_RENDER | GRALLOC_USAGE_HW_TEXTURE
+ * is assumed.
+ * Calling this function will usually cause following buffers to be
+ * reallocated.
+ */
+
+static inline int native_window_set_usage(
+ struct ANativeWindow* window, int usage)
+{
+ return window->perform(window, NATIVE_WINDOW_SET_USAGE, usage);
+}
+
+/* deprecated. Always returns 0. Don't call. */
+static inline int native_window_connect(
+ struct ANativeWindow* window __UNUSED, int api __UNUSED) __deprecated;
+
+static inline int native_window_connect(
+ struct ANativeWindow* window __UNUSED, int api __UNUSED) {
+ return 0;
+}
+
+/* deprecated. Always returns 0. Don't call. */
+static inline int native_window_disconnect(
+ struct ANativeWindow* window __UNUSED, int api __UNUSED) __deprecated;
+
+static inline int native_window_disconnect(
+ struct ANativeWindow* window __UNUSED, int api __UNUSED) {
+ return 0;
+}
+
+/*
+ * native_window_set_crop(..., crop)
+ * Sets which region of the next queued buffers needs to be considered.
+ * Depending on the scaling mode, a buffer's crop region is scaled and/or
+ * cropped to match the surface's size. This function sets the crop in
+ * pre-transformed buffer pixel coordinates.
+ *
+ * The specified crop region applies to all buffers queued after it is called.
+ *
+ * If 'crop' is NULL, subsequently queued buffers won't be cropped.
+ *
+ * An error is returned if for instance the crop region is invalid, out of the
+ * buffer's bound or if the window is invalid.
+ */
+static inline int native_window_set_crop(
+ struct ANativeWindow* window,
+ android_native_rect_t const * crop)
+{
+ return window->perform(window, NATIVE_WINDOW_SET_CROP, crop);
+}
+
+/*
+ * native_window_set_post_transform_crop(..., crop)
+ * Sets which region of the next queued buffers needs to be considered.
+ * Depending on the scaling mode, a buffer's crop region is scaled and/or
+ * cropped to match the surface's size. This function sets the crop in
+ * post-transformed pixel coordinates.
+ *
+ * The specified crop region applies to all buffers queued after it is called.
+ *
+ * If 'crop' is NULL, subsequently queued buffers won't be cropped.
+ *
+ * An error is returned if for instance the crop region is invalid, out of the
+ * buffer's bound or if the window is invalid.
+ */
+static inline int native_window_set_post_transform_crop(
+ struct ANativeWindow* window,
+ android_native_rect_t const * crop)
+{
+ return window->perform(window, NATIVE_WINDOW_SET_POST_TRANSFORM_CROP, crop);
+}
+
+/*
+ * native_window_set_active_rect(..., active_rect)
+ *
+ * This function is deprecated and will be removed soon. For now it simply
+ * sets the post-transform crop for compatibility while multi-project commits
+ * get checked.
+ */
+static inline int native_window_set_active_rect(
+ struct ANativeWindow* window,
+ android_native_rect_t const * active_rect) __deprecated;
+
+static inline int native_window_set_active_rect(
+ struct ANativeWindow* window,
+ android_native_rect_t const * active_rect)
+{
+ return native_window_set_post_transform_crop(window, active_rect);
+}
+
+/*
+ * native_window_set_buffer_count(..., count)
+ * Sets the number of buffers associated with this native window.
+ */
+static inline int native_window_set_buffer_count(
+ struct ANativeWindow* window,
+ size_t bufferCount)
+{
+ return window->perform(window, NATIVE_WINDOW_SET_BUFFER_COUNT, bufferCount);
+}
+
+/*
+ * native_window_set_buffers_geometry(..., int w, int h, int format)
+ * All buffers dequeued after this call will have the dimensions and format
+ * specified. A successful call to this function has the same effect as calling
+ * native_window_set_buffers_size and native_window_set_buffers_format.
+ *
+ * XXX: This function is deprecated. The native_window_set_buffers_dimensions
+ * and native_window_set_buffers_format functions should be used instead.
+ */
+static inline int native_window_set_buffers_geometry(
+ struct ANativeWindow* window,
+ int w, int h, int format) __deprecated;
+
+static inline int native_window_set_buffers_geometry(
+ struct ANativeWindow* window,
+ int w, int h, int format)
+{
+ return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_GEOMETRY,
+ w, h, format);
+}
+
+/*
+ * native_window_set_buffers_dimensions(..., int w, int h)
+ * All buffers dequeued after this call will have the dimensions specified.
+ * In particular, all buffers will have a fixed-size, independent from the
+ * native-window size. They will be scaled according to the scaling mode
+ * (see native_window_set_scaling_mode) upon window composition.
+ *
+ * If w and h are 0, the normal behavior is restored. That is, dequeued buffers
+ * following this call will be sized to match the window's size.
+ *
+ * Calling this function will reset the window crop to a NULL value, which
+ * disables cropping of the buffers.
+ */
+static inline int native_window_set_buffers_dimensions(
+ struct ANativeWindow* window,
+ int w, int h)
+{
+ return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS,
+ w, h);
+}
+
+/*
+ * native_window_set_buffers_user_dimensions(..., int w, int h)
+ *
+ * Sets the user buffer size for the window, which overrides the
+ * window's size. All buffers dequeued after this call will have the
+ * dimensions specified unless overridden by
+ * native_window_set_buffers_dimensions. All buffers will have a
+ * fixed-size, independent from the native-window size. They will be
+ * scaled according to the scaling mode (see
+ * native_window_set_scaling_mode) upon window composition.
+ *
+ * If w and h are 0, the normal behavior is restored. That is, the
+ * default buffer size will match the windows's size.
+ *
+ * Calling this function will reset the window crop to a NULL value, which
+ * disables cropping of the buffers.
+ */
+static inline int native_window_set_buffers_user_dimensions(
+ struct ANativeWindow* window,
+ int w, int h)
+{
+ return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_USER_DIMENSIONS,
+ w, h);
+}
+
+/*
+ * native_window_set_buffers_format(..., int format)
+ * All buffers dequeued after this call will have the format specified.
+ *
+ * If the specified format is 0, the default buffer format will be used.
+ */
+static inline int native_window_set_buffers_format(
+ struct ANativeWindow* window,
+ int format)
+{
+ return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_FORMAT, format);
+}
+
+/*
+ * native_window_set_buffers_data_space(..., int dataSpace)
+ * All buffers queued after this call will be associated with the dataSpace
+ * parameter specified.
+ *
+ * dataSpace specifies additional information about the buffer that's dependent
+ * on the buffer format and the endpoints. For example, it can be used to convey
+ * the color space of the image data in the buffer, or it can be used to
+ * indicate that the buffers contain depth measurement data instead of color
+ * images. The default dataSpace is 0, HAL_DATASPACE_UNKNOWN, unless it has been
+ * overridden by the consumer.
+ */
+static inline int native_window_set_buffers_data_space(
+ struct ANativeWindow* window,
+ android_dataspace_t dataSpace)
+{
+ return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_DATASPACE,
+ dataSpace);
+}
+
+/*
+ * native_window_set_buffers_transform(..., int transform)
+ * All buffers queued after this call will be displayed transformed according
+ * to the transform parameter specified.
+ */
+static inline int native_window_set_buffers_transform(
+ struct ANativeWindow* window,
+ int transform)
+{
+ return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_TRANSFORM,
+ transform);
+}
+
+/*
+ * native_window_set_buffers_sticky_transform(..., int transform)
+ * All buffers queued after this call will be displayed transformed according
+ * to the transform parameter specified applied on top of the regular buffer
+ * transform. Setting this transform will disable the transform hint.
+ *
+ * Temporary - This is only intended to be used by the LEGACY camera mode, do
+ * not use this for anything else.
+ */
+static inline int native_window_set_buffers_sticky_transform(
+ struct ANativeWindow* window,
+ int transform)
+{
+ return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_STICKY_TRANSFORM,
+ transform);
+}
+
+/*
+ * native_window_set_buffers_timestamp(..., int64_t timestamp)
+ * All buffers queued after this call will be associated with the timestamp
+ * parameter specified. If the timestamp is set to NATIVE_WINDOW_TIMESTAMP_AUTO
+ * (the default), timestamps will be generated automatically when queueBuffer is
+ * called. The timestamp is measured in nanoseconds, and is normally monotonically
+ * increasing. The timestamp should be unaffected by time-of-day adjustments,
+ * and for a camera should be strictly monotonic but for a media player may be
+ * reset when the position is set.
+ */
+static inline int native_window_set_buffers_timestamp(
+ struct ANativeWindow* window,
+ int64_t timestamp)
+{
+ return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP,
+ timestamp);
+}
+
+/*
+ * native_window_set_scaling_mode(..., int mode)
+ * All buffers queued after this call will be associated with the scaling mode
+ * specified.
+ */
+static inline int native_window_set_scaling_mode(
+ struct ANativeWindow* window,
+ int mode)
+{
+ return window->perform(window, NATIVE_WINDOW_SET_SCALING_MODE,
+ mode);
+}
+
+/*
+ * native_window_api_connect(..., int api)
+ * connects an API to this window. only one API can be connected at a time.
+ * Returns -EINVAL if for some reason the window cannot be connected, which
+ * can happen if it's connected to some other API.
+ */
+static inline int native_window_api_connect(
+ struct ANativeWindow* window, int api)
+{
+ return window->perform(window, NATIVE_WINDOW_API_CONNECT, api);
+}
+
+/*
+ * native_window_api_disconnect(..., int api)
+ * disconnect the API from this window.
+ * An error is returned if for instance the window wasn't connected in the
+ * first place.
+ */
+static inline int native_window_api_disconnect(
+ struct ANativeWindow* window, int api)
+{
+ return window->perform(window, NATIVE_WINDOW_API_DISCONNECT, api);
+}
+
+/*
+ * native_window_dequeue_buffer_and_wait(...)
+ * Dequeue a buffer and wait on the fence associated with that buffer. The
+ * buffer may safely be accessed immediately upon this function returning. An
+ * error is returned if either of the dequeue or the wait operations fail.
+ */
+static inline int native_window_dequeue_buffer_and_wait(ANativeWindow *anw,
+ struct ANativeWindowBuffer** anb) {
+ return anw->dequeueBuffer_DEPRECATED(anw, anb);
+}
+
+/*
+ * native_window_set_sideband_stream(..., native_handle_t*)
+ * Attach a sideband buffer stream to a native window.
+ */
+static inline int native_window_set_sideband_stream(
+ struct ANativeWindow* window,
+ native_handle_t* sidebandHandle)
+{
+ return window->perform(window, NATIVE_WINDOW_SET_SIDEBAND_STREAM,
+ sidebandHandle);
+}
+
+/*
+ * native_window_set_surface_damage(..., android_native_rect_t* rects, int numRects)
+ * Set the surface damage (i.e., the region of the surface that has changed
+ * since the previous frame). The damage set by this call will be reset (to the
+ * default of full-surface damage) after calling queue, so this must be called
+ * prior to every frame with damage that does not cover the whole surface if the
+ * caller desires downstream consumers to use this optimization.
+ *
+ * The damage region is specified as an array of rectangles, with the important
+ * caveat that the origin of the surface is considered to be the bottom-left
+ * corner, as in OpenGL ES.
+ *
+ * If numRects is set to 0, rects may be NULL, and the surface damage will be
+ * set to the full surface (the same as if this function had not been called for
+ * this frame).
+ */
+static inline int native_window_set_surface_damage(
+ struct ANativeWindow* window,
+ const android_native_rect_t* rects, size_t numRects)
+{
+ return window->perform(window, NATIVE_WINDOW_SET_SURFACE_DAMAGE,
+ rects, numRects);
+}
+
+__END_DECLS
+
+#endif /* SYSTEM_CORE_INCLUDE_ANDROID_WINDOW_H */
diff --git a/include/meson.build b/include/meson.build
index 4ce9668c..a89c0d7f 100644
--- a/include/meson.build
+++ b/include/meson.build
@@ -1 +1,2 @@
+subdir('android')
subdir('libcamera')