summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorLaurent Pinchart <laurent.pinchart@ideasonboard.com>2022-04-07 13:23:26 +0300
committerLaurent Pinchart <laurent.pinchart@ideasonboard.com>2022-06-16 12:03:52 +0300
commit71bdc1e441eba73ad80272573503445648d5ea9c (patch)
tree53833739a868e7c989f16e267801e1ddcdf93f36 /src
parent5fe1f00f197ed2d8dbfe3baf0d147ad610345c3c (diff)
libcamera: pipeline: simple: Support scaling on the sensor
As the simple pipeline handler targets simple pipelines on the SoC side, it often gets used with platforms that have a YUV sensor capable of outputting different sizes. Extend the heuristics used for pipeline discovery and configuration to scale as much as possible on the sensor side, in order to minimize the required bandwidth. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> Reviewed-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Diffstat (limited to 'src')
-rw-r--r--src/libcamera/pipeline/simple/simple.cpp144
1 files changed, 110 insertions, 34 deletions
diff --git a/src/libcamera/pipeline/simple/simple.cpp b/src/libcamera/pipeline/simple/simple.cpp
index 8c48162d..bc0cb1a0 100644
--- a/src/libcamera/pipeline/simple/simple.cpp
+++ b/src/libcamera/pipeline/simple/simple.cpp
@@ -115,16 +115,25 @@ LOG_DEFINE_CATEGORY(SimplePipeline)
*
* The simple pipeline handler configures the pipeline by propagating V4L2
* subdev formats from the camera sensor to the video node. The format is first
- * set on the camera sensor's output, using the native camera sensor
- * resolution. Then, on every link in the pipeline, the format is retrieved on
- * the link source and set unmodified on the link sink.
+ * set on the camera sensor's output, picking a resolution supported by the
+ * sensor that best matches the needs of the requested streams. Then, on every
+ * link in the pipeline, the format is retrieved on the link source and set
+ * unmodified on the link sink.
*
- * When initializating the camera data, this above procedure is repeated for
- * every media bus format supported by the camera sensor. Upon reaching the
- * video node, the pixel formats compatible with the media bus format are
- * enumerated. Each of those pixel formats corresponds to one possible pipeline
- * configuration, stored as an instance of SimpleCameraData::Configuration in
- * the SimpleCameraData::formats_ map.
+ * The best sensor resolution is selected using a heuristic that tries to
+ * minimize the required bus and memory bandwidth, as the simple pipeline
+ * handler is typically used on smaller, less powerful systems. To avoid the
+ * need to upscale, the pipeline handler picks the smallest sensor resolution
+ * large enough to accommodate the need of all streams. Resolutions that
+ * significantly restrict the field of view are ignored.
+ *
+ * When initializating the camera data, the above format propagation procedure
+ * is repeated for every media bus format and size supported by the camera
+ * sensor. Upon reaching the video node, the pixel formats compatible with the
+ * media bus format are enumerated. Each combination of the input media bus
+ * format, output pixel format and output size are recorded in an instance of
+ * the SimpleCameraData::Configuration structure, stored in the
+ * SimpleCameraData::configs_ vector.
*
* Format Conversion and Scaling
* -----------------------------
@@ -243,7 +252,7 @@ public:
V4L2VideoDevice *video_;
std::vector<Configuration> configs_;
- std::map<PixelFormat, const Configuration *> formats_;
+ std::map<PixelFormat, std::vector<const Configuration *>> formats_;
std::unique_ptr<SimpleConverter> converter_;
std::vector<std::unique_ptr<FrameBuffer>> converterBuffers_;
@@ -470,26 +479,24 @@ int SimpleCameraData::init()
/*
* Generate the list of possible pipeline configurations by trying each
- * media bus format supported by the sensor.
+ * media bus format and size supported by the sensor.
*/
- for (unsigned int code : sensor_->mbusCodes())
- tryPipeline(code, sensor_->resolution());
+ for (unsigned int code : sensor_->mbusCodes()) {
+ for (const Size &size : sensor_->sizes(code))
+ tryPipeline(code, size);
+ }
if (configs_.empty()) {
LOG(SimplePipeline, Error) << "No valid configuration found";
return -EINVAL;
}
- /*
- * Map the pixel formats to configurations. Any previously stored value
- * is overwritten, as the pipeline handler currently doesn't care about
- * how a particular PixelFormat is achieved.
- */
+ /* Map the pixel formats to configurations. */
for (const Configuration &config : configs_) {
- formats_[config.captureFormat] = &config;
+ formats_[config.captureFormat].push_back(&config);
for (PixelFormat fmt : config.outputFormats)
- formats_[fmt] = &config;
+ formats_[fmt].push_back(&config);
}
properties_ = sensor_->properties();
@@ -519,8 +526,10 @@ void SimpleCameraData::tryPipeline(unsigned int code, const Size &size)
int ret = setupFormats(&format, V4L2Subdevice::TryFormat);
if (ret < 0) {
/* Pipeline configuration failed, skip this configuration. */
+ format.mbus_code = code;
+ format.size = size;
LOG(SimplePipeline, Debug)
- << "Media bus code " << utils::hex(code, 4)
+ << "Sensor format " << format
<< " not supported for this pipeline";
return;
}
@@ -791,23 +800,71 @@ CameraConfiguration::Status SimpleCameraConfiguration::validate()
status = Adjusted;
}
+ /* Find the largest stream size. */
+ Size maxStreamSize;
+ for (const StreamConfiguration &cfg : config_)
+ maxStreamSize.expandTo(cfg.size);
+
+ LOG(SimplePipeline, Debug)
+ << "Largest stream size is " << maxStreamSize;
+
/*
- * Pick a configuration for the pipeline based on the pixel format for
- * the streams (ordered from highest to lowest priority). Default to
- * the first pipeline configuration if no streams requests a supported
- * pixel format.
+ * Find the best configuration for the pipeline using a heuristic.
+ * First select the pixel format based on the streams (which are
+ * considered ordered from highest to lowest priority). Default to the
+ * first pipeline configuration if no streams request a supported pixel
+ * format.
*/
- pipeConfig_ = data_->formats_.begin()->second;
+ const std::vector<const SimpleCameraData::Configuration *> *configs =
+ &data_->formats_.begin()->second;
for (const StreamConfiguration &cfg : config_) {
auto it = data_->formats_.find(cfg.pixelFormat);
if (it != data_->formats_.end()) {
- pipeConfig_ = it->second;
+ configs = &it->second;
break;
}
}
/*
+ * \todo Pick the best sensor output media bus format when the
+ * requested pixel format can be produced from multiple sensor media
+ * bus formats.
+ */
+
+ /*
+ * Then pick, among the possible configuration for the pixel format,
+ * the smallest sensor resolution that can accommodate all streams
+ * without upscaling.
+ */
+ const SimpleCameraData::Configuration *maxPipeConfig = nullptr;
+ pipeConfig_ = nullptr;
+
+ for (const SimpleCameraData::Configuration *pipeConfig : *configs) {
+ const Size &size = pipeConfig->captureSize;
+
+ if (size.width >= maxStreamSize.width &&
+ size.height >= maxStreamSize.height) {
+ if (!pipeConfig_ || size < pipeConfig_->captureSize)
+ pipeConfig_ = pipeConfig;
+ }
+
+ if (!maxPipeConfig || maxPipeConfig->captureSize < size)
+ maxPipeConfig = pipeConfig;
+ }
+
+ /* If no configuration was large enough, select the largest one. */
+ if (!pipeConfig_)
+ pipeConfig_ = maxPipeConfig;
+
+ LOG(SimplePipeline, Debug)
+ << "Picked "
+ << V4L2SubdeviceFormat{ pipeConfig_->code, pipeConfig_->sensorSize, {} }
+ << " -> " << pipeConfig_->captureSize
+ << "-" << pipeConfig_->captureFormat
+ << " for max stream size " << maxStreamSize;
+
+ /*
* Adjust the requested streams.
*
* Enable usage of the converter when producing multiple streams, as
@@ -899,13 +956,32 @@ CameraConfiguration *SimplePipelineHandler::generateConfiguration(Camera *camera
/* Create the formats map. */
std::map<PixelFormat, std::vector<SizeRange>> formats;
- std::transform(data->formats_.begin(), data->formats_.end(),
- std::inserter(formats, formats.end()),
- [](const auto &format) -> decltype(formats)::value_type {
- const PixelFormat &pixelFormat = format.first;
- const Size &size = format.second->captureSize;
- return { pixelFormat, { size } };
- });
+
+ for (const SimpleCameraData::Configuration &cfg : data->configs_) {
+ for (PixelFormat format : cfg.outputFormats)
+ formats[format].push_back(cfg.outputSizes);
+ }
+
+ /* Sort the sizes and merge any consecutive overlapping ranges. */
+ for (auto &[format, sizes] : formats) {
+ std::sort(sizes.begin(), sizes.end(),
+ [](SizeRange &a, SizeRange &b) {
+ return a.min < b.min;
+ });
+
+ auto cur = sizes.begin();
+ auto next = cur;
+
+ while (++next != sizes.end()) {
+ if (cur->max.width >= next->min.width &&
+ cur->max.height >= next->min.height)
+ cur->max = next->max;
+ else if (++cur != next)
+ *cur = *next;
+ }
+
+ sizes.erase(++cur, sizes.end());
+ }
/*
* Create the stream configurations. Take the first entry in the formats