diff options
Diffstat (limited to 'src/libcamera/pipeline/simple/simple.cpp')
| -rw-r--r-- | src/libcamera/pipeline/simple/simple.cpp | 144 |
1 files changed, 110 insertions, 34 deletions
diff --git a/src/libcamera/pipeline/simple/simple.cpp b/src/libcamera/pipeline/simple/simple.cpp index 8c48162d..bc0cb1a0 100644 --- a/src/libcamera/pipeline/simple/simple.cpp +++ b/src/libcamera/pipeline/simple/simple.cpp @@ -115,16 +115,25 @@ LOG_DEFINE_CATEGORY(SimplePipeline) * * The simple pipeline handler configures the pipeline by propagating V4L2 * subdev formats from the camera sensor to the video node. The format is first - * set on the camera sensor's output, using the native camera sensor - * resolution. Then, on every link in the pipeline, the format is retrieved on - * the link source and set unmodified on the link sink. + * set on the camera sensor's output, picking a resolution supported by the + * sensor that best matches the needs of the requested streams. Then, on every + * link in the pipeline, the format is retrieved on the link source and set + * unmodified on the link sink. * - * When initializating the camera data, this above procedure is repeated for - * every media bus format supported by the camera sensor. Upon reaching the - * video node, the pixel formats compatible with the media bus format are - * enumerated. Each of those pixel formats corresponds to one possible pipeline - * configuration, stored as an instance of SimpleCameraData::Configuration in - * the SimpleCameraData::formats_ map. + * The best sensor resolution is selected using a heuristic that tries to + * minimize the required bus and memory bandwidth, as the simple pipeline + * handler is typically used on smaller, less powerful systems. To avoid the + * need to upscale, the pipeline handler picks the smallest sensor resolution + * large enough to accommodate the need of all streams. Resolutions that + * significantly restrict the field of view are ignored. + * + * When initializating the camera data, the above format propagation procedure + * is repeated for every media bus format and size supported by the camera + * sensor. Upon reaching the video node, the pixel formats compatible with the + * media bus format are enumerated. Each combination of the input media bus + * format, output pixel format and output size are recorded in an instance of + * the SimpleCameraData::Configuration structure, stored in the + * SimpleCameraData::configs_ vector. * * Format Conversion and Scaling * ----------------------------- @@ -243,7 +252,7 @@ public: V4L2VideoDevice *video_; std::vector<Configuration> configs_; - std::map<PixelFormat, const Configuration *> formats_; + std::map<PixelFormat, std::vector<const Configuration *>> formats_; std::unique_ptr<SimpleConverter> converter_; std::vector<std::unique_ptr<FrameBuffer>> converterBuffers_; @@ -470,26 +479,24 @@ int SimpleCameraData::init() /* * Generate the list of possible pipeline configurations by trying each - * media bus format supported by the sensor. + * media bus format and size supported by the sensor. */ - for (unsigned int code : sensor_->mbusCodes()) - tryPipeline(code, sensor_->resolution()); + for (unsigned int code : sensor_->mbusCodes()) { + for (const Size &size : sensor_->sizes(code)) + tryPipeline(code, size); + } if (configs_.empty()) { LOG(SimplePipeline, Error) << "No valid configuration found"; return -EINVAL; } - /* - * Map the pixel formats to configurations. Any previously stored value - * is overwritten, as the pipeline handler currently doesn't care about - * how a particular PixelFormat is achieved. - */ + /* Map the pixel formats to configurations. */ for (const Configuration &config : configs_) { - formats_[config.captureFormat] = &config; + formats_[config.captureFormat].push_back(&config); for (PixelFormat fmt : config.outputFormats) - formats_[fmt] = &config; + formats_[fmt].push_back(&config); } properties_ = sensor_->properties(); @@ -519,8 +526,10 @@ void SimpleCameraData::tryPipeline(unsigned int code, const Size &size) int ret = setupFormats(&format, V4L2Subdevice::TryFormat); if (ret < 0) { /* Pipeline configuration failed, skip this configuration. */ + format.mbus_code = code; + format.size = size; LOG(SimplePipeline, Debug) - << "Media bus code " << utils::hex(code, 4) + << "Sensor format " << format << " not supported for this pipeline"; return; } @@ -791,23 +800,71 @@ CameraConfiguration::Status SimpleCameraConfiguration::validate() status = Adjusted; } + /* Find the largest stream size. */ + Size maxStreamSize; + for (const StreamConfiguration &cfg : config_) + maxStreamSize.expandTo(cfg.size); + + LOG(SimplePipeline, Debug) + << "Largest stream size is " << maxStreamSize; + /* - * Pick a configuration for the pipeline based on the pixel format for - * the streams (ordered from highest to lowest priority). Default to - * the first pipeline configuration if no streams requests a supported - * pixel format. + * Find the best configuration for the pipeline using a heuristic. + * First select the pixel format based on the streams (which are + * considered ordered from highest to lowest priority). Default to the + * first pipeline configuration if no streams request a supported pixel + * format. */ - pipeConfig_ = data_->formats_.begin()->second; + const std::vector<const SimpleCameraData::Configuration *> *configs = + &data_->formats_.begin()->second; for (const StreamConfiguration &cfg : config_) { auto it = data_->formats_.find(cfg.pixelFormat); if (it != data_->formats_.end()) { - pipeConfig_ = it->second; + configs = &it->second; break; } } /* + * \todo Pick the best sensor output media bus format when the + * requested pixel format can be produced from multiple sensor media + * bus formats. + */ + + /* + * Then pick, among the possible configuration for the pixel format, + * the smallest sensor resolution that can accommodate all streams + * without upscaling. + */ + const SimpleCameraData::Configuration *maxPipeConfig = nullptr; + pipeConfig_ = nullptr; + + for (const SimpleCameraData::Configuration *pipeConfig : *configs) { + const Size &size = pipeConfig->captureSize; + + if (size.width >= maxStreamSize.width && + size.height >= maxStreamSize.height) { + if (!pipeConfig_ || size < pipeConfig_->captureSize) + pipeConfig_ = pipeConfig; + } + + if (!maxPipeConfig || maxPipeConfig->captureSize < size) + maxPipeConfig = pipeConfig; + } + + /* If no configuration was large enough, select the largest one. */ + if (!pipeConfig_) + pipeConfig_ = maxPipeConfig; + + LOG(SimplePipeline, Debug) + << "Picked " + << V4L2SubdeviceFormat{ pipeConfig_->code, pipeConfig_->sensorSize, {} } + << " -> " << pipeConfig_->captureSize + << "-" << pipeConfig_->captureFormat + << " for max stream size " << maxStreamSize; + + /* * Adjust the requested streams. * * Enable usage of the converter when producing multiple streams, as @@ -899,13 +956,32 @@ CameraConfiguration *SimplePipelineHandler::generateConfiguration(Camera *camera /* Create the formats map. */ std::map<PixelFormat, std::vector<SizeRange>> formats; - std::transform(data->formats_.begin(), data->formats_.end(), - std::inserter(formats, formats.end()), - [](const auto &format) -> decltype(formats)::value_type { - const PixelFormat &pixelFormat = format.first; - const Size &size = format.second->captureSize; - return { pixelFormat, { size } }; - }); + + for (const SimpleCameraData::Configuration &cfg : data->configs_) { + for (PixelFormat format : cfg.outputFormats) + formats[format].push_back(cfg.outputSizes); + } + + /* Sort the sizes and merge any consecutive overlapping ranges. */ + for (auto &[format, sizes] : formats) { + std::sort(sizes.begin(), sizes.end(), + [](SizeRange &a, SizeRange &b) { + return a.min < b.min; + }); + + auto cur = sizes.begin(); + auto next = cur; + + while (++next != sizes.end()) { + if (cur->max.width >= next->min.width && + cur->max.height >= next->min.height) + cur->max = next->max; + else if (++cur != next) + *cur = *next; + } + + sizes.erase(++cur, sizes.end()); + } /* * Create the stream configurations. Take the first entry in the formats |