summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJacopo Mondi <jacopo@jmondi.org>2019-07-13 07:55:44 +0200
committerJacopo Mondi <jacopo@jmondi.org>2019-07-17 04:51:26 +0200
commit01c0ad98c478bc624a941f485ef4289286008a8b (patch)
treea427e4711784935b0515b48322c6061e1a88f0bd
parenta5ebcea8c0080bea478514c6fa6dd83c28adb986 (diff)
libcamera: ipu3: Disable links at configure() time
With the current IPU3 kernel driver implementation, a linked pipe shall be used (buffers should be queued on it) in order not to block all other pipes. Currently all links on the ImgU device are only disabled at match() time, implying that once an ImgU pipe gets linked, it should be used until the whole pipeline is not re-matched and links disabled again. This is a severe limitation for applications that wants to switch between cameras using different pipes going through a full library tear-down and reload. Perform link disabling at configure() time as well, so that a camera configuration operation always unlock the usage of the assigned pipe, regardless of the previously linked ones. Unfortunately this requires a camera start/stop sequence to always go through a configure step, a requirement that is not enforced by the Camera state machine. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
-rw-r--r--src/libcamera/pipeline/ipu3/ipu3.cpp54
1 files changed, 31 insertions, 23 deletions
diff --git a/src/libcamera/pipeline/ipu3/ipu3.cpp b/src/libcamera/pipeline/ipu3/ipu3.cpp
index 159a9312..bae3072b 100644
--- a/src/libcamera/pipeline/ipu3/ipu3.cpp
+++ b/src/libcamera/pipeline/ipu3/ipu3.cpp
@@ -500,6 +500,37 @@ int PipelineHandlerIPU3::configure(Camera *camera, CameraConfiguration *c)
int ret;
/*
+ * FIXME: enabled links in one ImgU pipe interfere with capture
+ * operations on the other one. This can be easily triggered by
+ * capturing from one camera and then trying to capture from the other
+ * one right after, without disabling media links on the first used
+ * pipe.
+ *
+ * The tricky part here is where to disable links on the ImgU instance
+ * which is currently not in use:
+ * 1) Link enable/disable cannot be done at start()/stop() time as video
+ * devices needs to be linked first before format can be configured on
+ * them.
+ * 2) As link enable has to be done at the least in configure(),
+ * before configuring formats, the only place where to disable links
+ * would be 'stop()', but the Camera class state machine allows
+ * start()<->stop() sequences without any configure() in between.
+ *
+ * As of now, disable all links in the ImgU media graph before
+ * configuring the device, to allow alternate the usage of the two
+ * ImgU pipes.
+ *
+ * As a consequence, a Camera using an ImgU shall be configured before
+ * any start()/stop() sequence. An application that wants to
+ * pre-configure all the camera and then start/stop them alternatively
+ * without going through any re-configuration (a sequence that is
+ * allowed by the Camera state machine) would now fail on the IPU3.
+ */
+ ret = imguMediaDev_->disableLinks();
+ if (ret)
+ return ret;
+
+ /*
* \todo: Enable links selectively based on the requested streams.
* As of now, enable all links unconditionally.
*/
@@ -784,29 +815,6 @@ bool PipelineHandlerIPU3::match(DeviceEnumerator *enumerator)
if (cio2MediaDev_->disableLinks())
return false;
- /*
- * FIXME: enabled links in one ImgU instance interfere with capture
- * operations on the other one. This can be easily triggered by
- * capturing from one camera and then trying to capture from the other
- * one right after, without disabling media links in the media graph
- * first.
- *
- * The tricky part here is where to disable links on the ImgU instance
- * which is currently not in use:
- * 1) Link enable/disable cannot be done at start/stop time as video
- * devices needs to be linked first before format can be configured on
- * them.
- * 2) As link enable has to be done at the least in configure(),
- * before configuring formats, the only place where to disable links
- * would be 'stop()', but the Camera class state machine allows
- * start()<->stop() sequences without any configure() in between.
- *
- * As of now, disable all links in the media graph at 'match()' time,
- * to allow testing different cameras in different test applications
- * runs. A test application that would use two distinct cameras without
- * going through a library teardown->match() sequence would fail
- * at the moment.
- */
ret = imguMediaDev_->disableLinks();
if (ret)
return ret;