summaryrefslogtreecommitdiff
path: root/include/android/hardware
diff options
context:
space:
mode:
authorJacopo Mondi <jacopo@jmondi.org>2019-05-10 17:12:45 +0200
committerJacopo Mondi <jacopo@jmondi.org>2019-08-12 10:34:13 +0200
commit206a22a6e927d6d78d0c34a0f6267be4e19396b7 (patch)
treeede6bdcffa891e31910fe5d0a3b29309763596d7 /include/android/hardware
parent3c658acf820bd634557c34c1d0e9f558e1b5405d (diff)
include: android: Add Android headers from Cros
Copy the Android Camera3 HAL headers from the ChromiumOS build system and define a new inclusion directive in the meson build system for them. The header files have been copied from: https://chromium.googlesource.com/chromiumos/platform2 at revision 9e65ddd2c496e712f005ada9715decd2ff8e4a03 and provide: 1) Android CameraHAL3 HAL headers in include/android/hardware/ 2) The Android system headers in include/android/system/ 3) The Android camera metadata headers in include/android/metadata/ The original path in the Cros platform2/ repository is, respectively: camera/android/header_files/include/hardware camera/android/header_files/include/system camera/android/libcamera_metadata/include/ Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Diffstat (limited to 'include/android/hardware')
-rw-r--r--include/android/hardware/libhardware/include/hardware/camera3.h3093
-rw-r--r--include/android/hardware/libhardware/include/hardware/camera_common.h916
-rw-r--r--include/android/hardware/libhardware/include/hardware/fb.h173
-rw-r--r--include/android/hardware/libhardware/include/hardware/gralloc.h384
-rw-r--r--include/android/hardware/libhardware/include/hardware/hardware.h238
5 files changed, 4804 insertions, 0 deletions
diff --git a/include/android/hardware/libhardware/include/hardware/camera3.h b/include/android/hardware/libhardware/include/hardware/camera3.h
new file mode 100644
index 00000000..49664dc3
--- /dev/null
+++ b/include/android/hardware/libhardware/include/hardware/camera3.h
@@ -0,0 +1,3093 @@
+/*
+ * Copyright (C) 2013 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_CAMERA3_H
+#define ANDROID_INCLUDE_CAMERA3_H
+
+#include <system/camera_metadata.h>
+#include "camera_common.h"
+
+/**
+ * Camera device HAL 3.3 [ CAMERA_DEVICE_API_VERSION_3_3 ]
+ *
+ * This is the current recommended version of the camera device HAL.
+ *
+ * Supports the android.hardware.Camera API, and as of v3.2, the
+ * android.hardware.camera2 API in LIMITED or FULL modes.
+ *
+ * Camera devices that support this version of the HAL must return
+ * CAMERA_DEVICE_API_VERSION_3_3 in camera_device_t.common.version and in
+ * camera_info_t.device_version (from camera_module_t.get_camera_info).
+ *
+ * CAMERA_DEVICE_API_VERSION_3_3:
+ * Camera modules that may contain version 3.3 devices must implement at
+ * least version 2.2 of the camera module interface (as defined by
+ * camera_module_t.common.module_api_version).
+ *
+ * CAMERA_DEVICE_API_VERSION_3_2:
+ * Camera modules that may contain version 3.2 devices must implement at
+ * least version 2.2 of the camera module interface (as defined by
+ * camera_module_t.common.module_api_version).
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ * Camera modules that may contain version 3.1 (or 3.0) devices must
+ * implement at least version 2.0 of the camera module interface
+ * (as defined by camera_module_t.common.module_api_version).
+ *
+ * See camera_common.h for more versioning details.
+ *
+ * Documentation index:
+ * S1. Version history
+ * S2. Startup and operation sequencing
+ * S3. Operational modes
+ * S4. 3A modes and state machines
+ * S5. Cropping
+ * S6. Error management
+ * S7. Key Performance Indicator (KPI) glossary
+ * S8. Sample Use Cases
+ * S9. Notes on Controls and Metadata
+ * S10. Reprocessing flow and controls
+ */
+
+/**
+ * S1. Version history:
+ *
+ * 1.0: Initial Android camera HAL (Android 4.0) [camera.h]:
+ *
+ * - Converted from C++ CameraHardwareInterface abstraction layer.
+ *
+ * - Supports android.hardware.Camera API.
+ *
+ * 2.0: Initial release of expanded-capability HAL (Android 4.2) [camera2.h]:
+ *
+ * - Sufficient for implementing existing android.hardware.Camera API.
+ *
+ * - Allows for ZSL queue in camera service layer
+ *
+ * - Not tested for any new features such manual capture control, Bayer RAW
+ * capture, reprocessing of RAW data.
+ *
+ * 3.0: First revision of expanded-capability HAL:
+ *
+ * - Major version change since the ABI is completely different. No change to
+ * the required hardware capabilities or operational model from 2.0.
+ *
+ * - Reworked input request and stream queue interfaces: Framework calls into
+ * HAL with next request and stream buffers already dequeued. Sync framework
+ * support is included, necessary for efficient implementations.
+ *
+ * - Moved triggers into requests, most notifications into results.
+ *
+ * - Consolidated all callbacks into framework into one structure, and all
+ * setup methods into a single initialize() call.
+ *
+ * - Made stream configuration into a single call to simplify stream
+ * management. Bidirectional streams replace STREAM_FROM_STREAM construct.
+ *
+ * - Limited mode semantics for older/limited hardware devices.
+ *
+ * 3.1: Minor revision of expanded-capability HAL:
+ *
+ * - configure_streams passes consumer usage flags to the HAL.
+ *
+ * - flush call to drop all in-flight requests/buffers as fast as possible.
+ *
+ * 3.2: Minor revision of expanded-capability HAL:
+ *
+ * - Deprecates get_metadata_vendor_tag_ops. Please use get_vendor_tag_ops
+ * in camera_common.h instead.
+ *
+ * - register_stream_buffers deprecated. All gralloc buffers provided
+ * by framework to HAL in process_capture_request may be new at any time.
+ *
+ * - add partial result support. process_capture_result may be called
+ * multiple times with a subset of the available result before the full
+ * result is available.
+ *
+ * - add manual template to camera3_request_template. The applications may
+ * use this template to control the capture settings directly.
+ *
+ * - Rework the bidirectional and input stream specifications.
+ *
+ * - change the input buffer return path. The buffer is returned in
+ * process_capture_result instead of process_capture_request.
+ *
+ * 3.3: Minor revision of expanded-capability HAL:
+ *
+ * - OPAQUE and YUV reprocessing API updates.
+ *
+ * - Basic support for depth output buffers.
+ *
+ * - Addition of data_space field to camera3_stream_t.
+ *
+ * - Addition of rotation field to camera3_stream_t.
+ *
+ * - Addition of camera3 stream configuration operation mode to camera3_stream_configuration_t
+ *
+ */
+
+/**
+ * S2. Startup and general expected operation sequence:
+ *
+ * 1. Framework calls camera_module_t->common.open(), which returns a
+ * hardware_device_t structure.
+ *
+ * 2. Framework inspects the hardware_device_t->version field, and instantiates
+ * the appropriate handler for that version of the camera hardware device. In
+ * case the version is CAMERA_DEVICE_API_VERSION_3_0, the device is cast to
+ * a camera3_device_t.
+ *
+ * 3. Framework calls camera3_device_t->ops->initialize() with the framework
+ * callback function pointers. This will only be called this one time after
+ * open(), before any other functions in the ops structure are called.
+ *
+ * 4. The framework calls camera3_device_t->ops->configure_streams() with a list
+ * of input/output streams to the HAL device.
+ *
+ * 5. <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * The framework allocates gralloc buffers and calls
+ * camera3_device_t->ops->register_stream_buffers() for at least one of the
+ * output streams listed in configure_streams. The same stream is registered
+ * only once.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * camera3_device_t->ops->register_stream_buffers() is not called and must
+ * be NULL.
+ *
+ * 6. The framework requests default settings for some number of use cases with
+ * calls to camera3_device_t->ops->construct_default_request_settings(). This
+ * may occur any time after step 3.
+ *
+ * 7. The framework constructs and sends the first capture request to the HAL,
+ * with settings based on one of the sets of default settings, and with at
+ * least one output stream, which has been registered earlier by the
+ * framework. This is sent to the HAL with
+ * camera3_device_t->ops->process_capture_request(). The HAL must block the
+ * return of this call until it is ready for the next request to be sent.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * The buffer_handle_t provided in the camera3_stream_buffer_t array
+ * in the camera3_capture_request_t may be new and never-before-seen
+ * by the HAL on any given new request.
+ *
+ * 8. The framework continues to submit requests, and call
+ * construct_default_request_settings to get default settings buffers for
+ * other use cases.
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * The framework may call register_stream_buffers() at this time for
+ * not-yet-registered streams.
+ *
+ * 9. When the capture of a request begins (sensor starts exposing for the
+ * capture) or processing a reprocess request begins, the HAL
+ * calls camera3_callback_ops_t->notify() with the SHUTTER event, including
+ * the frame number and the timestamp for start of exposure. For a reprocess
+ * request, the timestamp must be the start of exposure of the input image
+ * which can be looked up with android.sensor.timestamp from
+ * camera3_capture_request_t.settings when process_capture_request() is
+ * called.
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * This notify call must be made before the first call to
+ * process_capture_result() for that frame number.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * The camera3_callback_ops_t->notify() call with the SHUTTER event should
+ * be made as early as possible since the framework will be unable to
+ * deliver gralloc buffers to the application layer (for that frame) until
+ * it has a valid timestamp for the start of exposure (or the input image's
+ * start of exposure for a reprocess request).
+ *
+ * Both partial metadata results and the gralloc buffers may be sent to the
+ * framework at any time before or after the SHUTTER event.
+ *
+ * 10. After some pipeline delay, the HAL begins to return completed captures to
+ * the framework with camera3_callback_ops_t->process_capture_result(). These
+ * are returned in the same order as the requests were submitted. Multiple
+ * requests can be in flight at once, depending on the pipeline depth of the
+ * camera HAL device.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Once a buffer is returned by process_capture_result as part of the
+ * camera3_stream_buffer_t array, and the fence specified by release_fence
+ * has been signaled (this is a no-op for -1 fences), the ownership of that
+ * buffer is considered to be transferred back to the framework. After that,
+ * the HAL must no longer retain that particular buffer, and the
+ * framework may clean up the memory for it immediately.
+ *
+ * process_capture_result may be called multiple times for a single frame,
+ * each time with a new disjoint piece of metadata and/or set of gralloc
+ * buffers. The framework will accumulate these partial metadata results
+ * into one result.
+ *
+ * In particular, it is legal for a process_capture_result to be called
+ * simultaneously for both a frame N and a frame N+1 as long as the
+ * above rule holds for gralloc buffers (both input and output).
+ *
+ * 11. After some time, the framework may stop submitting new requests, wait for
+ * the existing captures to complete (all buffers filled, all results
+ * returned), and then call configure_streams() again. This resets the camera
+ * hardware and pipeline for a new set of input/output streams. Some streams
+ * may be reused from the previous configuration; if these streams' buffers
+ * had already been registered with the HAL, they will not be registered
+ * again. The framework then continues from step 7, if at least one
+ * registered output stream remains (otherwise, step 5 is required first).
+ *
+ * 12. Alternatively, the framework may call camera3_device_t->common->close()
+ * to end the camera session. This may be called at any time when no other
+ * calls from the framework are active, although the call may block until all
+ * in-flight captures have completed (all results returned, all buffers
+ * filled). After the close call returns, no more calls to the
+ * camera3_callback_ops_t functions are allowed from the HAL. Once the
+ * close() call is underway, the framework may not call any other HAL device
+ * functions.
+ *
+ * 13. In case of an error or other asynchronous event, the HAL must call
+ * camera3_callback_ops_t->notify() with the appropriate error/event
+ * message. After returning from a fatal device-wide error notification, the
+ * HAL should act as if close() had been called on it. However, the HAL must
+ * either cancel or complete all outstanding captures before calling
+ * notify(), so that once notify() is called with a fatal error, the
+ * framework will not receive further callbacks from the device. Methods
+ * besides close() should return -ENODEV or NULL after the notify() method
+ * returns from a fatal error message.
+ */
+
+/**
+ * S3. Operational modes:
+ *
+ * The camera 3 HAL device can implement one of two possible operational modes;
+ * limited and full. Full support is expected from new higher-end
+ * devices. Limited mode has hardware requirements roughly in line with those
+ * for a camera HAL device v1 implementation, and is expected from older or
+ * inexpensive devices. Full is a strict superset of limited, and they share the
+ * same essential operational flow, as documented above.
+ *
+ * The HAL must indicate its level of support with the
+ * android.info.supportedHardwareLevel static metadata entry, with 0 indicating
+ * limited mode, and 1 indicating full mode support.
+ *
+ * Roughly speaking, limited-mode devices do not allow for application control
+ * of capture settings (3A control only), high-rate capture of high-resolution
+ * images, raw sensor readout, or support for YUV output streams above maximum
+ * recording resolution (JPEG only for large images).
+ *
+ * ** Details of limited mode behavior:
+ *
+ * - Limited-mode devices do not need to implement accurate synchronization
+ * between capture request settings and the actual image data
+ * captured. Instead, changes to settings may take effect some time in the
+ * future, and possibly not for the same output frame for each settings
+ * entry. Rapid changes in settings may result in some settings never being
+ * used for a capture. However, captures that include high-resolution output
+ * buffers ( > 1080p ) have to use the settings as specified (but see below
+ * for processing rate).
+ *
+ * - Limited-mode devices do not need to support most of the
+ * settings/result/static info metadata. Specifically, only the following settings
+ * are expected to be consumed or produced by a limited-mode HAL device:
+ *
+ * android.control.aeAntibandingMode (controls and dynamic)
+ * android.control.aeExposureCompensation (controls and dynamic)
+ * android.control.aeLock (controls and dynamic)
+ * android.control.aeMode (controls and dynamic)
+ * android.control.aeRegions (controls and dynamic)
+ * android.control.aeTargetFpsRange (controls and dynamic)
+ * android.control.aePrecaptureTrigger (controls and dynamic)
+ * android.control.afMode (controls and dynamic)
+ * android.control.afRegions (controls and dynamic)
+ * android.control.awbLock (controls and dynamic)
+ * android.control.awbMode (controls and dynamic)
+ * android.control.awbRegions (controls and dynamic)
+ * android.control.captureIntent (controls and dynamic)
+ * android.control.effectMode (controls and dynamic)
+ * android.control.mode (controls and dynamic)
+ * android.control.sceneMode (controls and dynamic)
+ * android.control.videoStabilizationMode (controls and dynamic)
+ * android.control.aeAvailableAntibandingModes (static)
+ * android.control.aeAvailableModes (static)
+ * android.control.aeAvailableTargetFpsRanges (static)
+ * android.control.aeCompensationRange (static)
+ * android.control.aeCompensationStep (static)
+ * android.control.afAvailableModes (static)
+ * android.control.availableEffects (static)
+ * android.control.availableSceneModes (static)
+ * android.control.availableVideoStabilizationModes (static)
+ * android.control.awbAvailableModes (static)
+ * android.control.maxRegions (static)
+ * android.control.sceneModeOverrides (static)
+ * android.control.aeState (dynamic)
+ * android.control.afState (dynamic)
+ * android.control.awbState (dynamic)
+ *
+ * android.flash.mode (controls and dynamic)
+ * android.flash.info.available (static)
+ *
+ * android.info.supportedHardwareLevel (static)
+ *
+ * android.jpeg.gpsCoordinates (controls and dynamic)
+ * android.jpeg.gpsProcessingMethod (controls and dynamic)
+ * android.jpeg.gpsTimestamp (controls and dynamic)
+ * android.jpeg.orientation (controls and dynamic)
+ * android.jpeg.quality (controls and dynamic)
+ * android.jpeg.thumbnailQuality (controls and dynamic)
+ * android.jpeg.thumbnailSize (controls and dynamic)
+ * android.jpeg.availableThumbnailSizes (static)
+ * android.jpeg.maxSize (static)
+ *
+ * android.lens.info.minimumFocusDistance (static)
+ *
+ * android.request.id (controls and dynamic)
+ *
+ * android.scaler.cropRegion (controls and dynamic)
+ * android.scaler.availableStreamConfigurations (static)
+ * android.scaler.availableMinFrameDurations (static)
+ * android.scaler.availableStallDurations (static)
+ * android.scaler.availableMaxDigitalZoom (static)
+ * android.scaler.maxDigitalZoom (static)
+ * android.scaler.croppingType (static)
+ *
+ * android.sensor.orientation (static)
+ * android.sensor.timestamp (dynamic)
+ *
+ * android.statistics.faceDetectMode (controls and dynamic)
+ * android.statistics.info.availableFaceDetectModes (static)
+ * android.statistics.faceIds (dynamic)
+ * android.statistics.faceLandmarks (dynamic)
+ * android.statistics.faceRectangles (dynamic)
+ * android.statistics.faceScores (dynamic)
+ *
+ * android.sync.frameNumber (dynamic)
+ * android.sync.maxLatency (static)
+ *
+ * - Captures in limited mode that include high-resolution (> 1080p) output
+ * buffers may block in process_capture_request() until all the output buffers
+ * have been filled. A full-mode HAL device must process sequences of
+ * high-resolution requests at the rate indicated in the static metadata for
+ * that pixel format. The HAL must still call process_capture_result() to
+ * provide the output; the framework must simply be prepared for
+ * process_capture_request() to block until after process_capture_result() for
+ * that request completes for high-resolution captures for limited-mode
+ * devices.
+ *
+ * - Full-mode devices must support below additional capabilities:
+ * - 30fps at maximum resolution is preferred, more than 20fps is required.
+ * - Per frame control (android.sync.maxLatency == PER_FRAME_CONTROL).
+ * - Sensor manual control metadata. See MANUAL_SENSOR defined in
+ * android.request.availableCapabilities.
+ * - Post-processing manual control metadata. See MANUAL_POST_PROCESSING defined
+ * in android.request.availableCapabilities.
+ *
+ */
+
+/**
+ * S4. 3A modes and state machines:
+ *
+ * While the actual 3A algorithms are up to the HAL implementation, a high-level
+ * state machine description is defined by the HAL interface, to allow the HAL
+ * device and the framework to communicate about the current state of 3A, and to
+ * trigger 3A events.
+ *
+ * When the device is opened, all the individual 3A states must be
+ * STATE_INACTIVE. Stream configuration does not reset 3A. For example, locked
+ * focus must be maintained across the configure() call.
+ *
+ * Triggering a 3A action involves simply setting the relevant trigger entry in
+ * the settings for the next request to indicate start of trigger. For example,
+ * the trigger for starting an autofocus scan is setting the entry
+ * ANDROID_CONTROL_AF_TRIGGER to ANDROID_CONTROL_AF_TRIGGER_START for one
+ * request, and cancelling an autofocus scan is triggered by setting
+ * ANDROID_CONTROL_AF_TRIGGER to ANDROID_CONTRL_AF_TRIGGER_CANCEL. Otherwise,
+ * the entry will not exist, or be set to ANDROID_CONTROL_AF_TRIGGER_IDLE. Each
+ * request with a trigger entry set to a non-IDLE value will be treated as an
+ * independent triggering event.
+ *
+ * At the top level, 3A is controlled by the ANDROID_CONTROL_MODE setting, which
+ * selects between no 3A (ANDROID_CONTROL_MODE_OFF), normal AUTO mode
+ * (ANDROID_CONTROL_MODE_AUTO), and using the scene mode setting
+ * (ANDROID_CONTROL_USE_SCENE_MODE).
+ *
+ * - In OFF mode, each of the individual AE/AF/AWB modes are effectively OFF,
+ * and none of the capture controls may be overridden by the 3A routines.
+ *
+ * - In AUTO mode, Auto-focus, auto-exposure, and auto-whitebalance all run
+ * their own independent algorithms, and have their own mode, state, and
+ * trigger metadata entries, as listed in the next section.
+ *
+ * - In USE_SCENE_MODE, the value of the ANDROID_CONTROL_SCENE_MODE entry must
+ * be used to determine the behavior of 3A routines. In SCENE_MODEs other than
+ * FACE_PRIORITY, the HAL must override the values of
+ * ANDROId_CONTROL_AE/AWB/AF_MODE to be the mode it prefers for the selected
+ * SCENE_MODE. For example, the HAL may prefer SCENE_MODE_NIGHT to use
+ * CONTINUOUS_FOCUS AF mode. Any user selection of AE/AWB/AF_MODE when scene
+ * must be ignored for these scene modes.
+ *
+ * - For SCENE_MODE_FACE_PRIORITY, the AE/AWB/AF_MODE controls work as in
+ * ANDROID_CONTROL_MODE_AUTO, but the 3A routines must bias toward metering
+ * and focusing on any detected faces in the scene.
+ *
+ * S4.1. Auto-focus settings and result entries:
+ *
+ * Main metadata entries:
+ *
+ * ANDROID_CONTROL_AF_MODE: Control for selecting the current autofocus
+ * mode. Set by the framework in the request settings.
+ *
+ * AF_MODE_OFF: AF is disabled; the framework/app directly controls lens
+ * position.
+ *
+ * AF_MODE_AUTO: Single-sweep autofocus. No lens movement unless AF is
+ * triggered.
+ *
+ * AF_MODE_MACRO: Single-sweep up-close autofocus. No lens movement unless
+ * AF is triggered.
+ *
+ * AF_MODE_CONTINUOUS_VIDEO: Smooth continuous focusing, for recording
+ * video. Triggering immediately locks focus in current
+ * position. Canceling resumes cotinuous focusing.
+ *
+ * AF_MODE_CONTINUOUS_PICTURE: Fast continuous focusing, for
+ * zero-shutter-lag still capture. Triggering locks focus once currently
+ * active sweep concludes. Canceling resumes continuous focusing.
+ *
+ * AF_MODE_EDOF: Advanced extended depth of field focusing. There is no
+ * autofocus scan, so triggering one or canceling one has no effect.
+ * Images are focused automatically by the HAL.
+ *
+ * ANDROID_CONTROL_AF_STATE: Dynamic metadata describing the current AF
+ * algorithm state, reported by the HAL in the result metadata.
+ *
+ * AF_STATE_INACTIVE: No focusing has been done, or algorithm was
+ * reset. Lens is not moving. Always the state for MODE_OFF or MODE_EDOF.
+ * When the device is opened, it must start in this state.
+ *
+ * AF_STATE_PASSIVE_SCAN: A continuous focus algorithm is currently scanning
+ * for good focus. The lens is moving.
+ *
+ * AF_STATE_PASSIVE_FOCUSED: A continuous focus algorithm believes it is
+ * well focused. The lens is not moving. The HAL may spontaneously leave
+ * this state.
+ *
+ * AF_STATE_PASSIVE_UNFOCUSED: A continuous focus algorithm believes it is
+ * not well focused. The lens is not moving. The HAL may spontaneously
+ * leave this state.
+ *
+ * AF_STATE_ACTIVE_SCAN: A scan triggered by the user is underway.
+ *
+ * AF_STATE_FOCUSED_LOCKED: The AF algorithm believes it is focused. The
+ * lens is not moving.
+ *
+ * AF_STATE_NOT_FOCUSED_LOCKED: The AF algorithm has been unable to
+ * focus. The lens is not moving.
+ *
+ * ANDROID_CONTROL_AF_TRIGGER: Control for starting an autofocus scan, the
+ * meaning of which is mode- and state- dependent. Set by the framework in
+ * the request settings.
+ *
+ * AF_TRIGGER_IDLE: No current trigger.
+ *
+ * AF_TRIGGER_START: Trigger start of AF scan. Effect is mode and state
+ * dependent.
+ *
+ * AF_TRIGGER_CANCEL: Cancel current AF scan if any, and reset algorithm to
+ * default.
+ *
+ * Additional metadata entries:
+ *
+ * ANDROID_CONTROL_AF_REGIONS: Control for selecting the regions of the FOV
+ * that should be used to determine good focus. This applies to all AF
+ * modes that scan for focus. Set by the framework in the request
+ * settings.
+ *
+ * S4.2. Auto-exposure settings and result entries:
+ *
+ * Main metadata entries:
+ *
+ * ANDROID_CONTROL_AE_MODE: Control for selecting the current auto-exposure
+ * mode. Set by the framework in the request settings.
+ *
+ * AE_MODE_OFF: Autoexposure is disabled; the user controls exposure, gain,
+ * frame duration, and flash.
+ *
+ * AE_MODE_ON: Standard autoexposure, with flash control disabled. User may
+ * set flash to fire or to torch mode.
+ *
+ * AE_MODE_ON_AUTO_FLASH: Standard autoexposure, with flash on at HAL's
+ * discretion for precapture and still capture. User control of flash
+ * disabled.
+ *
+ * AE_MODE_ON_ALWAYS_FLASH: Standard autoexposure, with flash always fired
+ * for capture, and at HAL's discretion for precapture.. User control of
+ * flash disabled.
+ *
+ * AE_MODE_ON_AUTO_FLASH_REDEYE: Standard autoexposure, with flash on at
+ * HAL's discretion for precapture and still capture. Use a flash burst
+ * at end of precapture sequence to reduce redeye in the final
+ * picture. User control of flash disabled.
+ *
+ * ANDROID_CONTROL_AE_STATE: Dynamic metadata describing the current AE
+ * algorithm state, reported by the HAL in the result metadata.
+ *
+ * AE_STATE_INACTIVE: Initial AE state after mode switch. When the device is
+ * opened, it must start in this state.
+ *
+ * AE_STATE_SEARCHING: AE is not converged to a good value, and is adjusting
+ * exposure parameters.
+ *
+ * AE_STATE_CONVERGED: AE has found good exposure values for the current
+ * scene, and the exposure parameters are not changing. HAL may
+ * spontaneously leave this state to search for better solution.
+ *
+ * AE_STATE_LOCKED: AE has been locked with the AE_LOCK control. Exposure
+ * values are not changing.
+ *
+ * AE_STATE_FLASH_REQUIRED: The HAL has converged exposure, but believes
+ * flash is required for a sufficiently bright picture. Used for
+ * determining if a zero-shutter-lag frame can be used.
+ *
+ * AE_STATE_PRECAPTURE: The HAL is in the middle of a precapture
+ * sequence. Depending on AE mode, this mode may involve firing the
+ * flash for metering, or a burst of flash pulses for redeye reduction.
+ *
+ * ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER: Control for starting a metering
+ * sequence before capturing a high-quality image. Set by the framework in
+ * the request settings.
+ *
+ * PRECAPTURE_TRIGGER_IDLE: No current trigger.
+ *
+ * PRECAPTURE_TRIGGER_START: Start a precapture sequence. The HAL should
+ * use the subsequent requests to measure good exposure/white balance
+ * for an upcoming high-resolution capture.
+ *
+ * Additional metadata entries:
+ *
+ * ANDROID_CONTROL_AE_LOCK: Control for locking AE controls to their current
+ * values
+ *
+ * ANDROID_CONTROL_AE_EXPOSURE_COMPENSATION: Control for adjusting AE
+ * algorithm target brightness point.
+ *
+ * ANDROID_CONTROL_AE_TARGET_FPS_RANGE: Control for selecting the target frame
+ * rate range for the AE algorithm. The AE routine cannot change the frame
+ * rate to be outside these bounds.
+ *
+ * ANDROID_CONTROL_AE_REGIONS: Control for selecting the regions of the FOV
+ * that should be used to determine good exposure levels. This applies to
+ * all AE modes besides OFF.
+ *
+ * S4.3. Auto-whitebalance settings and result entries:
+ *
+ * Main metadata entries:
+ *
+ * ANDROID_CONTROL_AWB_MODE: Control for selecting the current white-balance
+ * mode.
+ *
+ * AWB_MODE_OFF: Auto-whitebalance is disabled. User controls color matrix.
+ *
+ * AWB_MODE_AUTO: Automatic white balance is enabled; 3A controls color
+ * transform, possibly using more complex transforms than a simple
+ * matrix.
+ *
+ * AWB_MODE_INCANDESCENT: Fixed white balance settings good for indoor
+ * incandescent (tungsten) lighting, roughly 2700K.
+ *
+ * AWB_MODE_FLUORESCENT: Fixed white balance settings good for fluorescent
+ * lighting, roughly 5000K.
+ *
+ * AWB_MODE_WARM_FLUORESCENT: Fixed white balance settings good for
+ * fluorescent lighting, roughly 3000K.
+ *
+ * AWB_MODE_DAYLIGHT: Fixed white balance settings good for daylight,
+ * roughly 5500K.
+ *
+ * AWB_MODE_CLOUDY_DAYLIGHT: Fixed white balance settings good for clouded
+ * daylight, roughly 6500K.
+ *
+ * AWB_MODE_TWILIGHT: Fixed white balance settings good for
+ * near-sunset/sunrise, roughly 15000K.
+ *
+ * AWB_MODE_SHADE: Fixed white balance settings good for areas indirectly
+ * lit by the sun, roughly 7500K.
+ *
+ * ANDROID_CONTROL_AWB_STATE: Dynamic metadata describing the current AWB
+ * algorithm state, reported by the HAL in the result metadata.
+ *
+ * AWB_STATE_INACTIVE: Initial AWB state after mode switch. When the device
+ * is opened, it must start in this state.
+ *
+ * AWB_STATE_SEARCHING: AWB is not converged to a good value, and is
+ * changing color adjustment parameters.
+ *
+ * AWB_STATE_CONVERGED: AWB has found good color adjustment values for the
+ * current scene, and the parameters are not changing. HAL may
+ * spontaneously leave this state to search for better solution.
+ *
+ * AWB_STATE_LOCKED: AWB has been locked with the AWB_LOCK control. Color
+ * adjustment values are not changing.
+ *
+ * Additional metadata entries:
+ *
+ * ANDROID_CONTROL_AWB_LOCK: Control for locking AWB color adjustments to
+ * their current values.
+ *
+ * ANDROID_CONTROL_AWB_REGIONS: Control for selecting the regions of the FOV
+ * that should be used to determine good color balance. This applies only
+ * to auto-WB mode.
+ *
+ * S4.4. General state machine transition notes
+ *
+ * Switching between AF, AE, or AWB modes always resets the algorithm's state
+ * to INACTIVE. Similarly, switching between CONTROL_MODE or
+ * CONTROL_SCENE_MODE if CONTROL_MODE == USE_SCENE_MODE resets all the
+ * algorithm states to INACTIVE.
+ *
+ * The tables below are per-mode.
+ *
+ * S4.5. AF state machines
+ *
+ * when enabling AF or changing AF mode
+ *| state | trans. cause | new state | notes |
+ *+--------------------+---------------+--------------------+------------------+
+ *| Any | AF mode change| INACTIVE | |
+ *+--------------------+---------------+--------------------+------------------+
+ *
+ * mode = AF_MODE_OFF or AF_MODE_EDOF
+ *| state | trans. cause | new state | notes |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | | INACTIVE | Never changes |
+ *+--------------------+---------------+--------------------+------------------+
+ *
+ * mode = AF_MODE_AUTO or AF_MODE_MACRO
+ *| state | trans. cause | new state | notes |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | AF_TRIGGER | ACTIVE_SCAN | Start AF sweep |
+ *| | | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| ACTIVE_SCAN | AF sweep done | FOCUSED_LOCKED | If AF successful |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| ACTIVE_SCAN | AF sweep done | NOT_FOCUSED_LOCKED | If AF successful |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| ACTIVE_SCAN | AF_CANCEL | INACTIVE | Cancel/reset AF |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Cancel/reset AF |
+ *+--------------------+---------------+--------------------+------------------+
+ *| FOCUSED_LOCKED | AF_TRIGGER | ACTIVE_SCAN | Start new sweep |
+ *| | | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Cancel/reset AF |
+ *+--------------------+---------------+--------------------+------------------+
+ *| NOT_FOCUSED_LOCKED | AF_TRIGGER | ACTIVE_SCAN | Start new sweep |
+ *| | | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| All states | mode change | INACTIVE | |
+ *+--------------------+---------------+--------------------+------------------+
+ *
+ * mode = AF_MODE_CONTINUOUS_VIDEO
+ *| state | trans. cause | new state | notes |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | HAL initiates | PASSIVE_SCAN | Start AF scan |
+ *| | new scan | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | AF_TRIGGER | NOT_FOCUSED_LOCKED | AF state query |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | HAL completes | PASSIVE_FOCUSED | End AF scan |
+ *| | current scan | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | HAL fails | PASSIVE_UNFOCUSED | End AF scan |
+ *| | current scan | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | AF_TRIGGER | FOCUSED_LOCKED | Immediate trans. |
+ *| | | | if focus is good |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate trans. |
+ *| | | | if focus is bad |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | AF_CANCEL | INACTIVE | Reset lens |
+ *| | | | position |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_FOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan |
+ *| | new scan | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_UNFOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan |
+ *| | new scan | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_FOCUSED | AF_TRIGGER | FOCUSED_LOCKED | Immediate trans. |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_UNFOCUSED | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate trans. |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| FOCUSED_LOCKED | AF_TRIGGER | FOCUSED_LOCKED | No effect |
+ *+--------------------+---------------+--------------------+------------------+
+ *| FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan |
+ *+--------------------+---------------+--------------------+------------------+
+ *| NOT_FOCUSED_LOCKED | AF_TRIGGER | NOT_FOCUSED_LOCKED | No effect |
+ *+--------------------+---------------+--------------------+------------------+
+ *| NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan |
+ *+--------------------+---------------+--------------------+------------------+
+ *
+ * mode = AF_MODE_CONTINUOUS_PICTURE
+ *| state | trans. cause | new state | notes |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | HAL initiates | PASSIVE_SCAN | Start AF scan |
+ *| | new scan | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | AF_TRIGGER | NOT_FOCUSED_LOCKED | AF state query |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | HAL completes | PASSIVE_FOCUSED | End AF scan |
+ *| | current scan | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | HAL fails | PASSIVE_UNFOCUSED | End AF scan |
+ *| | current scan | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | AF_TRIGGER | FOCUSED_LOCKED | Eventual trans. |
+ *| | | | once focus good |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | AF_TRIGGER | NOT_FOCUSED_LOCKED | Eventual trans. |
+ *| | | | if cannot focus |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_SCAN | AF_CANCEL | INACTIVE | Reset lens |
+ *| | | | position |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_FOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan |
+ *| | new scan | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_UNFOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan |
+ *| | new scan | | Lens now moving |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_FOCUSED | AF_TRIGGER | FOCUSED_LOCKED | Immediate trans. |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PASSIVE_UNFOCUSED | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate trans. |
+ *| | | | Lens now locked |
+ *+--------------------+---------------+--------------------+------------------+
+ *| FOCUSED_LOCKED | AF_TRIGGER | FOCUSED_LOCKED | No effect |
+ *+--------------------+---------------+--------------------+------------------+
+ *| FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan |
+ *+--------------------+---------------+--------------------+------------------+
+ *| NOT_FOCUSED_LOCKED | AF_TRIGGER | NOT_FOCUSED_LOCKED | No effect |
+ *+--------------------+---------------+--------------------+------------------+
+ *| NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan |
+ *+--------------------+---------------+--------------------+------------------+
+ *
+ * S4.6. AE and AWB state machines
+ *
+ * The AE and AWB state machines are mostly identical. AE has additional
+ * FLASH_REQUIRED and PRECAPTURE states. So rows below that refer to those two
+ * states should be ignored for the AWB state machine.
+ *
+ * when enabling AE/AWB or changing AE/AWB mode
+ *| state | trans. cause | new state | notes |
+ *+--------------------+---------------+--------------------+------------------+
+ *| Any | mode change | INACTIVE | |
+ *+--------------------+---------------+--------------------+------------------+
+ *
+ * mode = AE_MODE_OFF / AWB mode not AUTO
+ *| state | trans. cause | new state | notes |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | | INACTIVE | AE/AWB disabled |
+ *+--------------------+---------------+--------------------+------------------+
+ *
+ * mode = AE_MODE_ON_* / AWB_MODE_AUTO
+ *| state | trans. cause | new state | notes |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | HAL initiates | SEARCHING | |
+ *| | AE/AWB scan | | |
+ *+--------------------+---------------+--------------------+------------------+
+ *| INACTIVE | AE/AWB_LOCK | LOCKED | values locked |
+ *| | on | | |
+ *+--------------------+---------------+--------------------+------------------+
+ *| SEARCHING | HAL finishes | CONVERGED | good values, not |
+ *| | AE/AWB scan | | changing |
+ *+--------------------+---------------+--------------------+------------------+
+ *| SEARCHING | HAL finishes | FLASH_REQUIRED | converged but too|
+ *| | AE scan | | dark w/o flash |
+ *+--------------------+---------------+--------------------+------------------+
+ *| SEARCHING | AE/AWB_LOCK | LOCKED | values locked |
+ *| | on | | |
+ *+--------------------+---------------+--------------------+------------------+
+ *| CONVERGED | HAL initiates | SEARCHING | values locked |
+ *| | AE/AWB scan | | |
+ *+--------------------+---------------+--------------------+------------------+
+ *| CONVERGED | AE/AWB_LOCK | LOCKED | values locked |
+ *| | on | | |
+ *+--------------------+---------------+--------------------+------------------+
+ *| FLASH_REQUIRED | HAL initiates | SEARCHING | values locked |
+ *| | AE/AWB scan | | |
+ *+--------------------+---------------+--------------------+------------------+
+ *| FLASH_REQUIRED | AE/AWB_LOCK | LOCKED | values locked |
+ *| | on | | |
+ *+--------------------+---------------+--------------------+------------------+
+ *| LOCKED | AE/AWB_LOCK | SEARCHING | values not good |
+ *| | off | | after unlock |
+ *+--------------------+---------------+--------------------+------------------+
+ *| LOCKED | AE/AWB_LOCK | CONVERGED | values good |
+ *| | off | | after unlock |
+ *+--------------------+---------------+--------------------+------------------+
+ *| LOCKED | AE_LOCK | FLASH_REQUIRED | exposure good, |
+ *| | off | | but too dark |
+ *+--------------------+---------------+--------------------+------------------+
+ *| All AE states | PRECAPTURE_ | PRECAPTURE | Start precapture |
+ *| | START | | sequence |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PRECAPTURE | Sequence done.| CONVERGED | Ready for high- |
+ *| | AE_LOCK off | | quality capture |
+ *+--------------------+---------------+--------------------+------------------+
+ *| PRECAPTURE | Sequence done.| LOCKED | Ready for high- |
+ *| | AE_LOCK on | | quality capture |
+ *+--------------------+---------------+--------------------+------------------+
+ *
+ */
+
+/**
+ * S5. Cropping:
+ *
+ * Cropping of the full pixel array (for digital zoom and other use cases where
+ * a smaller FOV is desirable) is communicated through the
+ * ANDROID_SCALER_CROP_REGION setting. This is a per-request setting, and can
+ * change on a per-request basis, which is critical for implementing smooth
+ * digital zoom.
+ *
+ * The region is defined as a rectangle (x, y, width, height), with (x, y)
+ * describing the top-left corner of the rectangle. The rectangle is defined on
+ * the coordinate system of the sensor active pixel array, with (0,0) being the
+ * top-left pixel of the active pixel array. Therefore, the width and height
+ * cannot be larger than the dimensions reported in the
+ * ANDROID_SENSOR_ACTIVE_PIXEL_ARRAY static info field. The minimum allowed
+ * width and height are reported by the HAL through the
+ * ANDROID_SCALER_MAX_DIGITAL_ZOOM static info field, which describes the
+ * maximum supported zoom factor. Therefore, the minimum crop region width and
+ * height are:
+ *
+ * {width, height} =
+ * { floor(ANDROID_SENSOR_ACTIVE_PIXEL_ARRAY[0] /
+ * ANDROID_SCALER_MAX_DIGITAL_ZOOM),
+ * floor(ANDROID_SENSOR_ACTIVE_PIXEL_ARRAY[1] /
+ * ANDROID_SCALER_MAX_DIGITAL_ZOOM) }
+ *
+ * If the crop region needs to fulfill specific requirements (for example, it
+ * needs to start on even coordinates, and its width/height needs to be even),
+ * the HAL must do the necessary rounding and write out the final crop region
+ * used in the output result metadata. Similarly, if the HAL implements video
+ * stabilization, it must adjust the result crop region to describe the region
+ * actually included in the output after video stabilization is applied. In
+ * general, a camera-using application must be able to determine the field of
+ * view it is receiving based on the crop region, the dimensions of the image
+ * sensor, and the lens focal length.
+ *
+ * It is assumed that the cropping is applied after raw to other color space
+ * conversion. Raw streams (RAW16 and RAW_OPAQUE) don't have this conversion stage,
+ * and are not croppable. Therefore, the crop region must be ignored by the HAL
+ * for raw streams.
+ *
+ * Since the crop region applies to all non-raw streams, which may have different aspect
+ * ratios than the crop region, the exact sensor region used for each stream may
+ * be smaller than the crop region. Specifically, each stream should maintain
+ * square pixels and its aspect ratio by minimally further cropping the defined
+ * crop region. If the stream's aspect ratio is wider than the crop region, the
+ * stream should be further cropped vertically, and if the stream's aspect ratio
+ * is narrower than the crop region, the stream should be further cropped
+ * horizontally.
+ *
+ * In all cases, the stream crop must be centered within the full crop region,
+ * and each stream is only either cropped horizontally or vertical relative to
+ * the full crop region, never both.
+ *
+ * For example, if two streams are defined, a 640x480 stream (4:3 aspect), and a
+ * 1280x720 stream (16:9 aspect), below demonstrates the expected output regions
+ * for each stream for a few sample crop regions, on a hypothetical 3 MP (2000 x
+ * 1500 pixel array) sensor.
+ *
+ * Crop region: (500, 375, 1000, 750) (4:3 aspect ratio)
+ *
+ * 640x480 stream crop: (500, 375, 1000, 750) (equal to crop region)
+ * 1280x720 stream crop: (500, 469, 1000, 562) (marked with =)
+ *
+ * 0 1000 2000
+ * +---------+---------+---------+----------+
+ * | Active pixel array |
+ * | |
+ * | |
+ * + +-------------------+ + 375
+ * | | | |
+ * | O===================O |
+ * | I 1280x720 stream I |
+ * + I I + 750
+ * | I I |
+ * | O===================O |
+ * | | | |
+ * + +-------------------+ + 1125
+ * | Crop region, 640x480 stream |
+ * | |
+ * | |
+ * +---------+---------+---------+----------+ 1500
+ *
+ * Crop region: (500, 375, 1333, 750) (16:9 aspect ratio)
+ *
+ * 640x480 stream crop: (666, 375, 1000, 750) (marked with =)
+ * 1280x720 stream crop: (500, 375, 1333, 750) (equal to crop region)
+ *
+ * 0 1000 2000
+ * +---------+---------+---------+----------+
+ * | Active pixel array |
+ * | |
+ * | |
+ * + +---O==================O---+ + 375
+ * | | I 640x480 stream I | |
+ * | | I I | |
+ * | | I I | |
+ * + | I I | + 750
+ * | | I I | |
+ * | | I I | |
+ * | | I I | |
+ * + +---O==================O---+ + 1125
+ * | Crop region, 1280x720 stream |
+ * | |
+ * | |
+ * +---------+---------+---------+----------+ 1500
+ *
+ * Crop region: (500, 375, 750, 750) (1:1 aspect ratio)
+ *
+ * 640x480 stream crop: (500, 469, 750, 562) (marked with =)
+ * 1280x720 stream crop: (500, 543, 750, 414) (marged with #)
+ *
+ * 0 1000 2000
+ * +---------+---------+---------+----------+
+ * | Active pixel array |
+ * | |
+ * | |
+ * + +--------------+ + 375
+ * | O==============O |
+ * | ################ |
+ * | # # |
+ * + # # + 750
+ * | # # |
+ * | ################ 1280x720 |
+ * | O==============O 640x480 |
+ * + +--------------+ + 1125
+ * | Crop region |
+ * | |
+ * | |
+ * +---------+---------+---------+----------+ 1500
+ *
+ * And a final example, a 1024x1024 square aspect ratio stream instead of the
+ * 480p stream:
+ *
+ * Crop region: (500, 375, 1000, 750) (4:3 aspect ratio)
+ *
+ * 1024x1024 stream crop: (625, 375, 750, 750) (marked with #)
+ * 1280x720 stream crop: (500, 469, 1000, 562) (marked with =)
+ *
+ * 0 1000 2000
+ * +---------+---------+---------+----------+
+ * | Active pixel array |
+ * | |
+ * | 1024x1024 stream |
+ * + +--###############--+ + 375
+ * | | # # | |
+ * | O===================O |
+ * | I 1280x720 stream I |
+ * + I I + 750
+ * | I I |
+ * | O===================O |
+ * | | # # | |
+ * + +--###############--+ + 1125
+ * | Crop region |
+ * | |
+ * | |
+ * +---------+---------+---------+----------+ 1500
+ *
+ */
+
+/**
+ * S6. Error management:
+ *
+ * Camera HAL device ops functions that have a return value will all return
+ * -ENODEV / NULL in case of a serious error. This means the device cannot
+ * continue operation, and must be closed by the framework. Once this error is
+ * returned by some method, or if notify() is called with ERROR_DEVICE, only
+ * the close() method can be called successfully. All other methods will return
+ * -ENODEV / NULL.
+ *
+ * If a device op is called in the wrong sequence, for example if the framework
+ * calls configure_streams() is called before initialize(), the device must
+ * return -ENOSYS from the call, and do nothing.
+ *
+ * Transient errors in image capture must be reported through notify() as follows:
+ *
+ * - The failure of an entire capture to occur must be reported by the HAL by
+ * calling notify() with ERROR_REQUEST. Individual errors for the result
+ * metadata or the output buffers must not be reported in this case.
+ *
+ * - If the metadata for a capture cannot be produced, but some image buffers
+ * were filled, the HAL must call notify() with ERROR_RESULT.
+ *
+ * - If an output image buffer could not be filled, but either the metadata was
+ * produced or some other buffers were filled, the HAL must call notify() with
+ * ERROR_BUFFER for each failed buffer.
+ *
+ * In each of these transient failure cases, the HAL must still call
+ * process_capture_result, with valid output and input (if an input buffer was
+ * submitted) buffer_handle_t. If the result metadata could not be produced, it
+ * should be NULL. If some buffers could not be filled, they must be returned with
+ * process_capture_result in the error state, their release fences must be set to
+ * the acquire fences passed by the framework, or -1 if they have been waited on by
+ * the HAL already.
+ *
+ * Invalid input arguments result in -EINVAL from the appropriate methods. In
+ * that case, the framework must act as if that call had never been made.
+ *
+ */
+
+/**
+ * S7. Key Performance Indicator (KPI) glossary:
+ *
+ * This includes some critical definitions that are used by KPI metrics.
+ *
+ * Pipeline Latency:
+ * For a given capture request, the duration from the framework calling
+ * process_capture_request to the HAL sending capture result and all buffers
+ * back by process_capture_result call. To make the Pipeline Latency measure
+ * independent of frame rate, it is measured by frame count.
+ *
+ * For example, when frame rate is 30 (fps), the frame duration (time interval
+ * between adjacent frame capture time) is 33 (ms).
+ * If it takes 5 frames for framework to get the result and buffers back for
+ * a given request, then the Pipeline Latency is 5 (frames), instead of
+ * 5 x 33 = 165 (ms).
+ *
+ * The Pipeline Latency is determined by android.request.pipelineDepth and
+ * android.request.pipelineMaxDepth, see their definitions for more details.
+ *
+ */
+
+/**
+ * S8. Sample Use Cases:
+ *
+ * This includes some typical use case examples the camera HAL may support.
+ *
+ * S8.1 Zero Shutter Lag (ZSL) with CAMERA3_STREAM_BIDIRECTIONAL stream.
+ *
+ * For this use case, the bidirectional stream will be used by the framework as follows:
+ *
+ * 1. The framework includes a buffer from this stream as output buffer in a
+ * request as normal.
+ *
+ * 2. Once the HAL device returns a filled output buffer to the framework,
+ * the framework may do one of two things with the filled buffer:
+ *
+ * 2. a. The framework uses the filled data, and returns the now-used buffer
+ * to the stream queue for reuse. This behavior exactly matches the
+ * OUTPUT type of stream.
+ *
+ * 2. b. The framework wants to reprocess the filled data, and uses the
+ * buffer as an input buffer for a request. Once the HAL device has
+ * used the reprocessing buffer, it then returns it to the
+ * framework. The framework then returns the now-used buffer to the
+ * stream queue for reuse.
+ *
+ * 3. The HAL device will be given the buffer again as an output buffer for
+ * a request at some future point.
+ *
+ * For ZSL use case, the pixel format for bidirectional stream will be
+ * HAL_PIXEL_FORMAT_RAW_OPAQUE or HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED if it
+ * is listed in android.scaler.availableInputOutputFormatsMap. When
+ * HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED is used, the gralloc
+ * usage flags for the consumer endpoint will be set to GRALLOC_USAGE_HW_CAMERA_ZSL.
+ * A configuration stream list that has BIDIRECTIONAL stream used as input, will
+ * usually also have a distinct OUTPUT stream to get the reprocessing data. For example,
+ * for the ZSL use case, the stream list might be configured with the following:
+ *
+ * - A HAL_PIXEL_FORMAT_RAW_OPAQUE bidirectional stream is used
+ * as input.
+ * - And a HAL_PIXEL_FORMAT_BLOB (JPEG) output stream.
+ *
+ * S8.2 ZSL (OPAQUE) reprocessing with CAMERA3_STREAM_INPUT stream.
+ *
+ * CAMERA_DEVICE_API_VERSION_3_3:
+ * When OPAQUE_REPROCESSING capability is supported by the camera device, the INPUT stream
+ * can be used for application/framework implemented use case like Zero Shutter Lag (ZSL).
+ * This kind of stream will be used by the framework as follows:
+ *
+ * 1. Application/framework configures an opaque (RAW or YUV based) format output stream that is
+ * used to produce the ZSL output buffers. The stream pixel format will be
+ * HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED.
+ *
+ * 2. Application/framework configures an opaque format input stream that is used to
+ * send the reprocessing ZSL buffers to the HAL. The stream pixel format will
+ * also be HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED.
+ *
+ * 3. Application/framework configures a YUV/JPEG output stream that is used to receive the
+ * reprocessed data. The stream pixel format will be YCbCr_420/HAL_PIXEL_FORMAT_BLOB.
+ *
+ * 4. Application/framework picks a ZSL buffer from the ZSL output stream when a ZSL capture is
+ * issued by the application, and sends the data back as an input buffer in a
+ * reprocessing request, then sends to the HAL for reprocessing.
+ *
+ * 5. The HAL sends back the output YUV/JPEG result to framework.
+ *
+ * The HAL can select the actual opaque buffer format and configure the ISP pipeline
+ * appropriately based on the HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED format and
+ * the gralloc usage flag GRALLOC_USAGE_HW_CAMERA_ZSL.
+
+ * S8.3 YUV reprocessing with CAMERA3_STREAM_INPUT stream.
+ *
+ * When YUV reprocessing is supported by the HAL, the INPUT stream
+ * can be used for the YUV reprocessing use cases like lucky-shot and image fusion.
+ * This kind of stream will be used by the framework as follows:
+ *
+ * 1. Application/framework configures an YCbCr_420 format output stream that is
+ * used to produce the output buffers.
+ *
+ * 2. Application/framework configures an YCbCr_420 format input stream that is used to
+ * send the reprocessing YUV buffers to the HAL.
+ *
+ * 3. Application/framework configures a YUV/JPEG output stream that is used to receive the
+ * reprocessed data. The stream pixel format will be YCbCr_420/HAL_PIXEL_FORMAT_BLOB.
+ *
+ * 4. Application/framework processes the output buffers (could be as simple as picking
+ * an output buffer directly) from the output stream when a capture is issued, and sends
+ * the data back as an input buffer in a reprocessing request, then sends to the HAL
+ * for reprocessing.
+ *
+ * 5. The HAL sends back the output YUV/JPEG result to framework.
+ *
+ */
+
+/**
+ * S9. Notes on Controls and Metadata
+ *
+ * This section contains notes about the interpretation and usage of various metadata tags.
+ *
+ * S9.1 HIGH_QUALITY and FAST modes.
+ *
+ * Many camera post-processing blocks may be listed as having HIGH_QUALITY,
+ * FAST, and OFF operating modes. These blocks will typically also have an
+ * 'available modes' tag representing which of these operating modes are
+ * available on a given device. The general policy regarding implementing
+ * these modes is as follows:
+ *
+ * 1. Operating mode controls of hardware blocks that cannot be disabled
+ * must not list OFF in their corresponding 'available modes' tags.
+ *
+ * 2. OFF will always be included in their corresponding 'available modes'
+ * tag if it is possible to disable that hardware block.
+ *
+ * 3. FAST must always be included in the 'available modes' tags for all
+ * post-processing blocks supported on the device. If a post-processing
+ * block also has a slower and higher quality operating mode that does
+ * not meet the framerate requirements for FAST mode, HIGH_QUALITY should
+ * be included in the 'available modes' tag to represent this operating
+ * mode.
+ */
+
+/**
+ * S10. Reprocessing flow and controls
+ *
+ * This section describes the OPAQUE and YUV reprocessing flow and controls. OPAQUE reprocessing
+ * uses an opaque format that is not directly application-visible, and the application can
+ * only select some of the output buffers and send back to HAL for reprocessing, while YUV
+ * reprocessing gives the application opportunity to process the buffers before reprocessing.
+ *
+ * S8 gives the stream configurations for the typical reprocessing uses cases,
+ * this section specifies the buffer flow and controls in more details.
+ *
+ * S10.1 OPAQUE (typically for ZSL use case) reprocessing flow and controls
+ *
+ * For OPAQUE reprocessing (e.g. ZSL) use case, after the application creates the specific
+ * output and input streams, runtime buffer flow and controls are specified as below:
+ *
+ * 1. Application starts output streaming by sending repeating requests for output
+ * opaque buffers and preview. The buffers are held by an application
+ * maintained circular buffer. The requests are based on CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG
+ * capture template, which should have all necessary settings that guarantee output
+ * frame rate is not slowed down relative to sensor output frame rate.
+ *
+ * 2. When a capture is issued, the application selects one output buffer based
+ * on application buffer selection logic, e.g. good AE and AF statistics etc.
+ * Application then creates an reprocess request based on the capture result associated
+ * with this selected buffer. The selected output buffer is now added to this reprocess
+ * request as an input buffer, the output buffer of this reprocess request should be
+ * either JPEG output buffer or YUV output buffer, or both, depending on the application
+ * choice.
+ *
+ * 3. Application then alters the reprocess settings to get best image quality. The HAL must
+ * support and only support below controls if the HAL support OPAQUE_REPROCESSING capability:
+ * - android.jpeg.* (if JPEG buffer is included as one of the output)
+ * - android.noiseReduction.mode (change to HIGH_QUALITY if it is supported)
+ * - android.edge.mode (change to HIGH_QUALITY if it is supported)
+ * All other controls must be ignored by the HAL.
+ * 4. HAL processed the input buffer and return the output buffers in the capture results
+ * as normal.
+ *
+ * S10.2 YUV reprocessing flow and controls
+ *
+ * The YUV reprocessing buffer flow is similar as OPAQUE reprocessing, with below difference:
+ *
+ * 1. Application may want to have finer granularity control of the intermediate YUV images
+ * (before reprocessing). For example, application may choose
+ * - android.noiseReduction.mode == MINIMAL
+ * to make sure the no YUV domain noise reduction has applied to the output YUV buffers,
+ * then it can do its own advanced noise reduction on them. For OPAQUE reprocessing case, this
+ * doesn't matter, as long as the final reprocessed image has the best quality.
+ * 2. Application may modify the YUV output buffer data. For example, for image fusion use
+ * case, where multiple output images are merged together to improve the signal-to-noise
+ * ratio (SNR). The input buffer may be generated from multiple buffers by the application.
+ * To avoid excessive amount of noise reduction and insufficient amount of edge enhancement
+ * being applied to the input buffer, the application can hint the HAL how much effective
+ * exposure time improvement has been done by the application, then the HAL can adjust the
+ * noise reduction and edge enhancement paramters to get best reprocessed image quality.
+ * Below tag can be used for this purpose:
+ * - android.reprocess.effectiveExposureFactor
+ * The value would be exposure time increase factor applied to the original output image,
+ * for example, if there are N image merged, the exposure time increase factor would be up
+ * to sqrt(N). See this tag spec for more details.
+ *
+ * S10.3 Reprocessing pipeline characteristics
+ *
+ * Reprocessing pipeline has below different characteristics comparing with normal output
+ * pipeline:
+ *
+ * 1. The reprocessing result can be returned ahead of the pending normal output results. But
+ * the FIFO ordering must be maintained for all reprocessing results. For example, there are
+ * below requests (A stands for output requests, B stands for reprocessing requests)
+ * being processed by the HAL:
+ * A1, A2, A3, A4, B1, A5, B2, A6...
+ * result of B1 can be returned before A1-A4, but result of B2 must be returned after B1.
+ * 2. Single input rule: For a given reprocessing request, all output buffers must be from the
+ * input buffer, rather than sensor output. For example, if a reprocess request include both
+ * JPEG and preview buffers, all output buffers must be produced from the input buffer
+ * included by the reprocessing request, rather than sensor. The HAL must not output preview
+ * buffers from sensor, while output JPEG buffer from the input buffer.
+ * 3. Input buffer will be from camera output directly (ZSL case) or indirectly(image fusion
+ * case). For the case where buffer is modified, the size will remain same. The HAL can
+ * notify CAMERA3_MSG_ERROR_REQUEST if buffer from unknown source is sent.
+ * 4. Result as reprocessing request: The HAL can expect that a reprocessing request is a copy
+ * of one of the output results with minor allowed setting changes. The HAL can notify
+ * CAMERA3_MSG_ERROR_REQUEST if a request from unknown source is issued.
+ * 5. Output buffers may not be used as inputs across the configure stream boundary, This is
+ * because an opaque stream like the ZSL output stream may have different actual image size
+ * inside of the ZSL buffer to save power and bandwidth for smaller resolution JPEG capture.
+ * The HAL may notify CAMERA3_MSG_ERROR_REQUEST if this case occurs.
+ * 6. HAL Reprocess requests error reporting during flush should follow the same rule specified
+ * by flush() method.
+ *
+ */
+
+__BEGIN_DECLS
+
+struct camera3_device;
+
+/**********************************************************************
+ *
+ * Camera3 stream and stream buffer definitions.
+ *
+ * These structs and enums define the handles and contents of the input and
+ * output streams connecting the HAL to various framework and application buffer
+ * consumers. Each stream is backed by a gralloc buffer queue.
+ *
+ */
+
+/**
+ * camera3_stream_type_t:
+ *
+ * The type of the camera stream, which defines whether the camera HAL device is
+ * the producer or the consumer for that stream, and how the buffers of the
+ * stream relate to the other streams.
+ */
+typedef enum camera3_stream_type {
+ /**
+ * This stream is an output stream; the camera HAL device will be
+ * responsible for filling buffers from this stream with newly captured or
+ * reprocessed image data.
+ */
+ CAMERA3_STREAM_OUTPUT = 0,
+
+ /**
+ * This stream is an input stream; the camera HAL device will be responsible
+ * for reading buffers from this stream and sending them through the camera
+ * processing pipeline, as if the buffer was a newly captured image from the
+ * imager.
+ *
+ * The pixel format for input stream can be any format reported by
+ * android.scaler.availableInputOutputFormatsMap. The pixel format of the
+ * output stream that is used to produce the reprocessing data may be any
+ * format reported by android.scaler.availableStreamConfigurations. The
+ * supported input/output stream combinations depends the camera device
+ * capabilities, see android.scaler.availableInputOutputFormatsMap for
+ * stream map details.
+ *
+ * This kind of stream is generally used to reprocess data into higher
+ * quality images (that otherwise would cause a frame rate performance
+ * loss), or to do off-line reprocessing.
+ *
+ * CAMERA_DEVICE_API_VERSION_3_3:
+ * The typical use cases are OPAQUE (typically ZSL) and YUV reprocessing,
+ * see S8.2, S8.3 and S10 for more details.
+ */
+ CAMERA3_STREAM_INPUT = 1,
+
+ /**
+ * This stream can be used for input and output. Typically, the stream is
+ * used as an output stream, but occasionally one already-filled buffer may
+ * be sent back to the HAL device for reprocessing.
+ *
+ * This kind of stream is meant generally for Zero Shutter Lag (ZSL)
+ * features, where copying the captured image from the output buffer to the
+ * reprocessing input buffer would be expensive. See S8.1 for more details.
+ *
+ * Note that the HAL will always be reprocessing data it produced.
+ *
+ */
+ CAMERA3_STREAM_BIDIRECTIONAL = 2,
+
+ /**
+ * Total number of framework-defined stream types
+ */
+ CAMERA3_NUM_STREAM_TYPES
+
+} camera3_stream_type_t;
+
+/**
+ * camera3_stream_rotation_t:
+ *
+ * The required counterclockwise rotation of camera stream.
+ */
+typedef enum camera3_stream_rotation {
+ /* No rotation */
+ CAMERA3_STREAM_ROTATION_0 = 0,
+
+ /* Rotate by 90 degree counterclockwise */
+ CAMERA3_STREAM_ROTATION_90 = 1,
+
+ /* Rotate by 180 degree counterclockwise */
+ CAMERA3_STREAM_ROTATION_180 = 2,
+
+ /* Rotate by 270 degree counterclockwise */
+ CAMERA3_STREAM_ROTATION_270 = 3
+} camera3_stream_rotation_t;
+
+/**
+ * camera3_stream_configuration_mode_t:
+ *
+ * This defines the general operation mode for the HAL (for a given stream configuration), where
+ * modes besides NORMAL have different semantics, and usually limit the generality of the API in
+ * exchange for higher performance in some particular area.
+ */
+typedef enum camera3_stream_configuration_mode {
+ /**
+ * Normal stream configuration operation mode. This is the default camera operation mode,
+ * where all semantics of HAL APIs and metadata controls apply.
+ */
+ CAMERA3_STREAM_CONFIGURATION_NORMAL_MODE = 0,
+
+ /**
+ * Special constrained high speed operation mode for devices that can not support high
+ * speed output in NORMAL mode. All streams in this configuration are operating at high speed
+ * mode and have different characteristics and limitations to achieve high speed output.
+ * The NORMAL mode can still be used for high speed output if the HAL can support high speed
+ * output while satisfying all the semantics of HAL APIs and metadata controls. It is
+ * recommended for the HAL to support high speed output in NORMAL mode (by advertising the high
+ * speed FPS ranges in android.control.aeAvailableTargetFpsRanges) if possible.
+ *
+ * This mode has below limitations/requirements:
+ *
+ * 1. The HAL must support up to 2 streams with sizes reported by
+ * android.control.availableHighSpeedVideoConfigurations.
+ * 2. In this mode, the HAL is expected to output up to 120fps or higher. This mode must
+ * support the targeted FPS range and size configurations reported by
+ * android.control.availableHighSpeedVideoConfigurations.
+ * 3. The HAL must support HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED output stream format.
+ * 4. To achieve efficient high speed streaming, the HAL may have to aggregate
+ * multiple frames together and send to camera device for processing where the request
+ * controls are same for all the frames in this batch (batch mode). The HAL must support
+ * max batch size and the max batch size requirements defined by
+ * android.control.availableHighSpeedVideoConfigurations.
+ * 5. In this mode, the HAL must override aeMode, awbMode, and afMode to ON, ON, and
+ * CONTINUOUS_VIDEO, respectively. All post-processing block mode controls must be
+ * overridden to be FAST. Therefore, no manual control of capture and post-processing
+ * parameters is possible. All other controls operate the same as when
+ * android.control.mode == AUTO. This means that all other android.control.* fields
+ * must continue to work, such as
+ *
+ * android.control.aeTargetFpsRange
+ * android.control.aeExposureCompensation
+ * android.control.aeLock
+ * android.control.awbLock
+ * android.control.effectMode
+ * android.control.aeRegions
+ * android.control.afRegions
+ * android.control.awbRegions
+ * android.control.afTrigger
+ * android.control.aePrecaptureTrigger
+ *
+ * Outside of android.control.*, the following controls must work:
+ *
+ * android.flash.mode (TORCH mode only, automatic flash for still capture will not work
+ * since aeMode is ON)
+ * android.lens.opticalStabilizationMode (if it is supported)
+ * android.scaler.cropRegion
+ * android.statistics.faceDetectMode (if it is supported)
+ *
+ * For more details about high speed stream requirements, see
+ * android.control.availableHighSpeedVideoConfigurations and CONSTRAINED_HIGH_SPEED_VIDEO
+ * capability defined in android.request.availableCapabilities.
+ *
+ * This mode only needs to be supported by HALs that include CONSTRAINED_HIGH_SPEED_VIDEO in
+ * the android.request.availableCapabilities static metadata.
+ */
+ CAMERA3_STREAM_CONFIGURATION_CONSTRAINED_HIGH_SPEED_MODE = 1,
+
+ /**
+ * First value for vendor-defined stream configuration modes.
+ */
+ CAMERA3_VENDOR_STREAM_CONFIGURATION_MODE_START = 0x8000
+} camera3_stream_configuration_mode_t;
+
+/**
+ * camera3_stream_t:
+ *
+ * A handle to a single camera input or output stream. A stream is defined by
+ * the framework by its buffer resolution and format, and additionally by the
+ * HAL with the gralloc usage flags and the maximum in-flight buffer count.
+ *
+ * The stream structures are owned by the framework, but pointers to a
+ * camera3_stream passed into the HAL by configure_streams() are valid until the
+ * end of the first subsequent configure_streams() call that _does not_ include
+ * that camera3_stream as an argument, or until the end of the close() call.
+ *
+ * All camera3_stream framework-controlled members are immutable once the
+ * camera3_stream is passed into configure_streams(). The HAL may only change
+ * the HAL-controlled parameters during a configure_streams() call, except for
+ * the contents of the private pointer.
+ *
+ * If a configure_streams() call returns a non-fatal error, all active streams
+ * remain valid as if configure_streams() had not been called.
+ *
+ * The endpoint of the stream is not visible to the camera HAL device.
+ * In DEVICE_API_VERSION_3_1, this was changed to share consumer usage flags
+ * on streams where the camera is a producer (OUTPUT and BIDIRECTIONAL stream
+ * types) see the usage field below.
+ */
+typedef struct camera3_stream {
+
+ /*****
+ * Set by framework before configure_streams()
+ */
+
+ /**
+ * The type of the stream, one of the camera3_stream_type_t values.
+ */
+ int stream_type;
+
+ /**
+ * The width in pixels of the buffers in this stream
+ */
+ uint32_t width;
+
+ /**
+ * The height in pixels of the buffers in this stream
+ */
+ uint32_t height;
+
+ /**
+ * The pixel format for the buffers in this stream. Format is a value from
+ * the HAL_PIXEL_FORMAT_* list in system/core/include/system/graphics.h, or
+ * from device-specific headers.
+ *
+ * If HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED is used, then the platform
+ * gralloc module will select a format based on the usage flags provided by
+ * the camera device and the other endpoint of the stream.
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * The camera HAL device must inspect the buffers handed to it in the
+ * subsequent register_stream_buffers() call to obtain the
+ * implementation-specific format details, if necessary.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * register_stream_buffers() won't be called by the framework, so the HAL
+ * should configure the ISP and sensor pipeline based purely on the sizes,
+ * usage flags, and formats for the configured streams.
+ */
+ int format;
+
+ /*****
+ * Set by HAL during configure_streams().
+ */
+
+ /**
+ * The gralloc usage flags for this stream, as needed by the HAL. The usage
+ * flags are defined in gralloc.h (GRALLOC_USAGE_*), or in device-specific
+ * headers.
+ *
+ * For output streams, these are the HAL's producer usage flags. For input
+ * streams, these are the HAL's consumer usage flags. The usage flags from
+ * the producer and the consumer will be combined together and then passed
+ * to the platform gralloc HAL module for allocating the gralloc buffers for
+ * each stream.
+ *
+ * Version information:
+ *
+ * == CAMERA_DEVICE_API_VERSION_3_0:
+ *
+ * No initial value guaranteed when passed via configure_streams().
+ * HAL may not use this field as input, and must write over this field
+ * with its usage flags.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * For stream_type OUTPUT and BIDIRECTIONAL, when passed via
+ * configure_streams(), the initial value of this is the consumer's
+ * usage flags. The HAL may use these consumer flags to decide stream
+ * configuration.
+ * For stream_type INPUT, when passed via configure_streams(), the initial
+ * value of this is 0.
+ * For all streams passed via configure_streams(), the HAL must write
+ * over this field with its usage flags.
+ */
+ uint32_t usage;
+
+ /**
+ * The maximum number of buffers the HAL device may need to have dequeued at
+ * the same time. The HAL device may not have more buffers in-flight from
+ * this stream than this value.
+ */
+ uint32_t max_buffers;
+
+ /**
+ * A handle to HAL-private information for the stream. Will not be inspected
+ * by the framework code.
+ */
+ void *priv;
+
+ /**
+ * A field that describes the contents of the buffer. The format and buffer
+ * dimensions define the memory layout and structure of the stream buffers,
+ * while dataSpace defines the meaning of the data within the buffer.
+ *
+ * For most formats, dataSpace defines the color space of the image data.
+ * In addition, for some formats, dataSpace indicates whether image- or
+ * depth-based data is requested. See system/core/include/system/graphics.h
+ * for details of formats and valid dataSpace values for each format.
+ *
+ * Version information:
+ *
+ * < CAMERA_DEVICE_API_VERSION_3_3:
+ *
+ * Not defined and should not be accessed. dataSpace should be assumed to
+ * be HAL_DATASPACE_UNKNOWN, and the appropriate color space, etc, should
+ * be determined from the usage flags and the format.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_3:
+ *
+ * Always set by the camera service. HAL must use this dataSpace to
+ * configure the stream to the correct colorspace, or to select between
+ * color and depth outputs if supported.
+ */
+ android_dataspace_t data_space;
+
+ /**
+ * The required output rotation of the stream, one of
+ * the camera3_stream_rotation_t values. This must be inspected by HAL along
+ * with stream width and height. For example, if the rotation is 90 degree
+ * and the stream width and height is 720 and 1280 respectively, camera service
+ * will supply buffers of size 720x1280, and HAL should capture a 1280x720 image
+ * and rotate the image by 90 degree counterclockwise. The rotation field is
+ * no-op when the stream type is input. Camera HAL must ignore the rotation
+ * field for an input stream.
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Not defined and must not be accessed. HAL must not apply any rotation
+ * on output images.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_3:
+ *
+ * Always set by camera service. HAL must inspect this field during stream
+ * configuration and returns -EINVAL if HAL cannot perform such rotation.
+ * HAL must always support CAMERA3_STREAM_ROTATION_0, so a
+ * configure_streams() call must not fail for unsupported rotation if
+ * rotation field of all streams is CAMERA3_STREAM_ROTATION_0.
+ *
+ */
+ int rotation;
+
+ /**
+ * This should be one of the camera3_stream_rotation_t values except for
+ * CAMERA3_STREAM_ROTATION_180.
+ * When setting to CAMERA3_STREAM_ROTATION_90 or CAMERA3_STREAM_ROTATION_270, HAL would crop,
+ * rotate the frame by the specified degrees clockwise and scale it up to original size.
+ * In Chrome OS, it's possible to have a portrait activity run in a landscape screen with
+ * landscape-mounted camera. The activity would show stretched or rotated preview because it
+ * does not expect to receive landscape preview frames. To solve this problem, we ask HAL to
+ * crop, rotate and scale the frames and modify CameraCharacteristics.SENSOR_ORIENTATION
+ * accordingly to imitate a portrait camera.
+ * Setting it to CAMERA3_STREAM_ROTATION_0 means no crop-rotate-scale would be performed.
+ * |cros_rotate_scale_degrees| in all camera3_stream_t of a configure_streams() call must be
+ * identical. The HAL should return -EINVAL if the degrees are not the same for all the streams.
+ */
+ int crop_rotate_scale_degrees;
+
+ /* reserved for future use */
+ void *reserved[6];
+
+} camera3_stream_t;
+
+/**
+ * camera3_stream_configuration_t:
+ *
+ * A structure of stream definitions, used by configure_streams(). This
+ * structure defines all the output streams and the reprocessing input
+ * stream for the current camera use case.
+ */
+typedef struct camera3_stream_configuration {
+ /**
+ * The total number of streams requested by the framework. This includes
+ * both input and output streams. The number of streams will be at least 1,
+ * and there will be at least one output-capable stream.
+ */
+ uint32_t num_streams;
+
+ /**
+ * An array of camera stream pointers, defining the input/output
+ * configuration for the camera HAL device.
+ *
+ * At most one input-capable stream may be defined (INPUT or BIDIRECTIONAL)
+ * in a single configuration.
+ *
+ * At least one output-capable stream must be defined (OUTPUT or
+ * BIDIRECTIONAL).
+ */
+ camera3_stream_t **streams;
+
+ /**
+ * >= CAMERA_DEVICE_API_VERSION_3_3:
+ *
+ * The operation mode of streams in this configuration, one of the value defined in
+ * camera3_stream_configuration_mode_t.
+ * The HAL can use this mode as an indicator to set the stream property (e.g.,
+ * camera3_stream->max_buffers) appropriately. For example, if the configuration is
+ * CAMERA3_STREAM_CONFIGURATION_CONSTRAINED_HIGH_SPEED_MODE, the HAL may want to set aside more
+ * buffers for batch mode operation (see android.control.availableHighSpeedVideoConfigurations
+ * for batch mode definition).
+ *
+ */
+ uint32_t operation_mode;
+} camera3_stream_configuration_t;
+
+/**
+ * camera3_buffer_status_t:
+ *
+ * The current status of a single stream buffer.
+ */
+typedef enum camera3_buffer_status {
+ /**
+ * The buffer is in a normal state, and can be used after waiting on its
+ * sync fence.
+ */
+ CAMERA3_BUFFER_STATUS_OK = 0,
+
+ /**
+ * The buffer does not contain valid data, and the data in it should not be
+ * used. The sync fence must still be waited on before reusing the buffer.
+ */
+ CAMERA3_BUFFER_STATUS_ERROR = 1
+
+} camera3_buffer_status_t;
+
+/**
+ * camera3_stream_buffer_t:
+ *
+ * A single buffer from a camera3 stream. It includes a handle to its parent
+ * stream, the handle to the gralloc buffer itself, and sync fences
+ *
+ * The buffer does not specify whether it is to be used for input or output;
+ * that is determined by its parent stream type and how the buffer is passed to
+ * the HAL device.
+ */
+typedef struct camera3_stream_buffer {
+ /**
+ * The handle of the stream this buffer is associated with
+ */
+ camera3_stream_t *stream;
+
+ /**
+ * The native handle to the buffer
+ */
+ buffer_handle_t *buffer;
+
+ /**
+ * Current state of the buffer, one of the camera3_buffer_status_t
+ * values. The framework will not pass buffers to the HAL that are in an
+ * error state. In case a buffer could not be filled by the HAL, it must
+ * have its status set to CAMERA3_BUFFER_STATUS_ERROR when returned to the
+ * framework with process_capture_result().
+ */
+ int status;
+
+ /**
+ * The acquire sync fence for this buffer. The HAL must wait on this fence
+ * fd before attempting to read from or write to this buffer.
+ *
+ * The framework may be set to -1 to indicate that no waiting is necessary
+ * for this buffer.
+ *
+ * When the HAL returns an output buffer to the framework with
+ * process_capture_result(), the acquire_fence must be set to -1. If the HAL
+ * never waits on the acquire_fence due to an error in filling a buffer,
+ * when calling process_capture_result() the HAL must set the release_fence
+ * of the buffer to be the acquire_fence passed to it by the framework. This
+ * will allow the framework to wait on the fence before reusing the buffer.
+ *
+ * For input buffers, the HAL must not change the acquire_fence field during
+ * the process_capture_request() call.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * When the HAL returns an input buffer to the framework with
+ * process_capture_result(), the acquire_fence must be set to -1. If the HAL
+ * never waits on input buffer acquire fence due to an error, the sync
+ * fences should be handled similarly to the way they are handled for output
+ * buffers.
+ */
+ int acquire_fence;
+
+ /**
+ * The release sync fence for this buffer. The HAL must set this fence when
+ * returning buffers to the framework, or write -1 to indicate that no
+ * waiting is required for this buffer.
+ *
+ * For the output buffers, the fences must be set in the output_buffers
+ * array passed to process_capture_result().
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * For the input buffer, the release fence must be set by the
+ * process_capture_request() call.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * For the input buffer, the fences must be set in the input_buffer
+ * passed to process_capture_result().
+ *
+ * After signaling the release_fence for this buffer, the HAL
+ * should not make any further attempts to access this buffer as the
+ * ownership has been fully transferred back to the framework.
+ *
+ * If a fence of -1 was specified then the ownership of this buffer
+ * is transferred back immediately upon the call of process_capture_result.
+ */
+ int release_fence;
+
+} camera3_stream_buffer_t;
+
+/**
+ * camera3_stream_buffer_set_t:
+ *
+ * The complete set of gralloc buffers for a stream. This structure is given to
+ * register_stream_buffers() to allow the camera HAL device to register/map/etc
+ * newly allocated stream buffers.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Deprecated (and not used). In particular,
+ * register_stream_buffers is also deprecated and will never be invoked.
+ *
+ */
+typedef struct camera3_stream_buffer_set {
+ /**
+ * The stream handle for the stream these buffers belong to
+ */
+ camera3_stream_t *stream;
+
+ /**
+ * The number of buffers in this stream. It is guaranteed to be at least
+ * stream->max_buffers.
+ */
+ uint32_t num_buffers;
+
+ /**
+ * The array of gralloc buffer handles for this stream. If the stream format
+ * is set to HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED, the camera HAL device
+ * should inspect the passed-in buffers to determine any platform-private
+ * pixel format information.
+ */
+ buffer_handle_t **buffers;
+
+} camera3_stream_buffer_set_t;
+
+/**
+ * camera3_jpeg_blob:
+ *
+ * Transport header for compressed JPEG buffers in output streams.
+ *
+ * To capture JPEG images, a stream is created using the pixel format
+ * HAL_PIXEL_FORMAT_BLOB. The buffer size for the stream is calculated by the
+ * framework, based on the static metadata field android.jpeg.maxSize. Since
+ * compressed JPEG images are of variable size, the HAL needs to include the
+ * final size of the compressed image using this structure inside the output
+ * stream buffer. The JPEG blob ID field must be set to CAMERA3_JPEG_BLOB_ID.
+ *
+ * Transport header should be at the end of the JPEG output stream buffer. That
+ * means the jpeg_blob_id must start at byte[buffer_size -
+ * sizeof(camera3_jpeg_blob)], where the buffer_size is the size of gralloc buffer.
+ * Any HAL using this transport header must account for it in android.jpeg.maxSize
+ * The JPEG data itself starts at the beginning of the buffer and should be
+ * jpeg_size bytes long.
+ */
+typedef struct camera3_jpeg_blob {
+ uint16_t jpeg_blob_id;
+ uint32_t jpeg_size;
+} camera3_jpeg_blob_t;
+
+enum {
+ CAMERA3_JPEG_BLOB_ID = 0x00FF
+};
+
+/**********************************************************************
+ *
+ * Message definitions for the HAL notify() callback.
+ *
+ * These definitions are used for the HAL notify callback, to signal
+ * asynchronous events from the HAL device to the Android framework.
+ *
+ */
+
+/**
+ * camera3_msg_type:
+ *
+ * Indicates the type of message sent, which specifies which member of the
+ * message union is valid.
+ *
+ */
+typedef enum camera3_msg_type {
+ /**
+ * An error has occurred. camera3_notify_msg.message.error contains the
+ * error information.
+ */
+ CAMERA3_MSG_ERROR = 1,
+
+ /**
+ * The exposure of a given request or processing a reprocess request has
+ * begun. camera3_notify_msg.message.shutter contains the information
+ * the capture.
+ */
+ CAMERA3_MSG_SHUTTER = 2,
+
+ /**
+ * Number of framework message types
+ */
+ CAMERA3_NUM_MESSAGES
+
+} camera3_msg_type_t;
+
+/**
+ * Defined error codes for CAMERA_MSG_ERROR
+ */
+typedef enum camera3_error_msg_code {
+ /**
+ * A serious failure occured. No further frames or buffer streams will
+ * be produced by the device. Device should be treated as closed. The
+ * client must reopen the device to use it again. The frame_number field
+ * is unused.
+ */
+ CAMERA3_MSG_ERROR_DEVICE = 1,
+
+ /**
+ * An error has occurred in processing a request. No output (metadata or
+ * buffers) will be produced for this request. The frame_number field
+ * specifies which request has been dropped. Subsequent requests are
+ * unaffected, and the device remains operational.
+ */
+ CAMERA3_MSG_ERROR_REQUEST = 2,
+
+ /**
+ * An error has occurred in producing an output result metadata buffer
+ * for a request, but output stream buffers for it will still be
+ * available. Subsequent requests are unaffected, and the device remains
+ * operational. The frame_number field specifies the request for which
+ * result metadata won't be available.
+ */
+ CAMERA3_MSG_ERROR_RESULT = 3,
+
+ /**
+ * An error has occurred in placing an output buffer into a stream for a
+ * request. The frame metadata and other buffers may still be
+ * available. Subsequent requests are unaffected, and the device remains
+ * operational. The frame_number field specifies the request for which the
+ * buffer was dropped, and error_stream contains a pointer to the stream
+ * that dropped the frame.u
+ */
+ CAMERA3_MSG_ERROR_BUFFER = 4,
+
+ /**
+ * Number of error types
+ */
+ CAMERA3_MSG_NUM_ERRORS
+
+} camera3_error_msg_code_t;
+
+/**
+ * camera3_error_msg_t:
+ *
+ * Message contents for CAMERA3_MSG_ERROR
+ */
+typedef struct camera3_error_msg {
+ /**
+ * Frame number of the request the error applies to. 0 if the frame number
+ * isn't applicable to the error.
+ */
+ uint32_t frame_number;
+
+ /**
+ * Pointer to the stream that had a failure. NULL if the stream isn't
+ * applicable to the error.
+ */
+ camera3_stream_t *error_stream;
+
+ /**
+ * The code for this error; one of the CAMERA_MSG_ERROR enum values.
+ */
+ int error_code;
+
+} camera3_error_msg_t;
+
+/**
+ * camera3_shutter_msg_t:
+ *
+ * Message contents for CAMERA3_MSG_SHUTTER
+ */
+typedef struct camera3_shutter_msg {
+ /**
+ * Frame number of the request that has begun exposure or reprocessing.
+ */
+ uint32_t frame_number;
+
+ /**
+ * Timestamp for the start of capture. For a reprocess request, this must
+ * be input image's start of capture. This must match the capture result
+ * metadata's sensor exposure start timestamp.
+ */
+ uint64_t timestamp;
+
+} camera3_shutter_msg_t;
+
+/**
+ * camera3_notify_msg_t:
+ *
+ * The message structure sent to camera3_callback_ops_t.notify()
+ */
+typedef struct camera3_notify_msg {
+
+ /**
+ * The message type. One of camera3_notify_msg_type, or a private extension.
+ */
+ int type;
+
+ union {
+ /**
+ * Error message contents. Valid if type is CAMERA3_MSG_ERROR
+ */
+ camera3_error_msg_t error;
+
+ /**
+ * Shutter message contents. Valid if type is CAMERA3_MSG_SHUTTER
+ */
+ camera3_shutter_msg_t shutter;
+
+ /**
+ * Generic message contents. Used to ensure a minimum size for custom
+ * message types.
+ */
+ uint8_t generic[32];
+ } message;
+
+} camera3_notify_msg_t;
+
+/**********************************************************************
+ *
+ * Capture request/result definitions for the HAL process_capture_request()
+ * method, and the process_capture_result() callback.
+ *
+ */
+
+/**
+ * camera3_request_template_t:
+ *
+ * Available template types for
+ * camera3_device_ops.construct_default_request_settings()
+ */
+typedef enum camera3_request_template {
+ /**
+ * Standard camera preview operation with 3A on auto.
+ */
+ CAMERA3_TEMPLATE_PREVIEW = 1,
+
+ /**
+ * Standard camera high-quality still capture with 3A and flash on auto.
+ */
+ CAMERA3_TEMPLATE_STILL_CAPTURE = 2,
+
+ /**
+ * Standard video recording plus preview with 3A on auto, torch off.
+ */
+ CAMERA3_TEMPLATE_VIDEO_RECORD = 3,
+
+ /**
+ * High-quality still capture while recording video. Application will
+ * include preview, video record, and full-resolution YUV or JPEG streams in
+ * request. Must not cause stuttering on video stream. 3A on auto.
+ */
+ CAMERA3_TEMPLATE_VIDEO_SNAPSHOT = 4,
+
+ /**
+ * Zero-shutter-lag mode. Application will request preview and
+ * full-resolution data for each frame, and reprocess it to JPEG when a
+ * still image is requested by user. Settings should provide highest-quality
+ * full-resolution images without compromising preview frame rate. 3A on
+ * auto.
+ */
+ CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG = 5,
+
+ /**
+ * A basic template for direct application control of capture
+ * parameters. All automatic control is disabled (auto-exposure, auto-white
+ * balance, auto-focus), and post-processing parameters are set to preview
+ * quality. The manual capture parameters (exposure, sensitivity, etc.)
+ * are set to reasonable defaults, but should be overridden by the
+ * application depending on the intended use case.
+ */
+ CAMERA3_TEMPLATE_MANUAL = 6,
+
+ /* Total number of templates */
+ CAMERA3_TEMPLATE_COUNT,
+
+ /**
+ * First value for vendor-defined request templates
+ */
+ CAMERA3_VENDOR_TEMPLATE_START = 0x40000000
+
+} camera3_request_template_t;
+
+/**
+ * camera3_capture_request_t:
+ *
+ * A single request for image capture/buffer reprocessing, sent to the Camera
+ * HAL device by the framework in process_capture_request().
+ *
+ * The request contains the settings to be used for this capture, and the set of
+ * output buffers to write the resulting image data in. It may optionally
+ * contain an input buffer, in which case the request is for reprocessing that
+ * input buffer instead of capturing a new image with the camera sensor. The
+ * capture is identified by the frame_number.
+ *
+ * In response, the camera HAL device must send a camera3_capture_result
+ * structure asynchronously to the framework, using the process_capture_result()
+ * callback.
+ */
+typedef struct camera3_capture_request {
+ /**
+ * The frame number is an incrementing integer set by the framework to
+ * uniquely identify this capture. It needs to be returned in the result
+ * call, and is also used to identify the request in asynchronous
+ * notifications sent to camera3_callback_ops_t.notify().
+ */
+ uint32_t frame_number;
+
+ /**
+ * The settings buffer contains the capture and processing parameters for
+ * the request. As a special case, a NULL settings buffer indicates that the
+ * settings are identical to the most-recently submitted capture request. A
+ * NULL buffer cannot be used as the first submitted request after a
+ * configure_streams() call.
+ */
+ const camera_metadata_t *settings;
+
+ /**
+ * The input stream buffer to use for this request, if any.
+ *
+ * If input_buffer is NULL, then the request is for a new capture from the
+ * imager. If input_buffer is valid, the request is for reprocessing the
+ * image contained in input_buffer.
+ *
+ * In the latter case, the HAL must set the release_fence of the
+ * input_buffer to a valid sync fence, or to -1 if the HAL does not support
+ * sync, before process_capture_request() returns.
+ *
+ * The HAL is required to wait on the acquire sync fence of the input buffer
+ * before accessing it.
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * Any input buffer included here will have been registered with the HAL
+ * through register_stream_buffers() before its inclusion in a request.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * The buffers will not have been pre-registered with the HAL.
+ * Subsequent requests may reuse buffers, or provide entirely new buffers.
+ */
+ camera3_stream_buffer_t *input_buffer;
+
+ /**
+ * The number of output buffers for this capture request. Must be at least
+ * 1.
+ */
+ uint32_t num_output_buffers;
+
+ /**
+ * An array of num_output_buffers stream buffers, to be filled with image
+ * data from this capture/reprocess. The HAL must wait on the acquire fences
+ * of each stream buffer before writing to them.
+ *
+ * The HAL takes ownership of the actual buffer_handle_t entries in
+ * output_buffers; the framework does not access them until they are
+ * returned in a camera3_capture_result_t.
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * All the buffers included here will have been registered with the HAL
+ * through register_stream_buffers() before their inclusion in a request.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Any or all of the buffers included here may be brand new in this
+ * request (having never before seen by the HAL).
+ */
+ const camera3_stream_buffer_t *output_buffers;
+
+} camera3_capture_request_t;
+
+/**
+ * camera3_capture_result_t:
+ *
+ * The result of a single capture/reprocess by the camera HAL device. This is
+ * sent to the framework asynchronously with process_capture_result(), in
+ * response to a single capture request sent to the HAL with
+ * process_capture_request(). Multiple process_capture_result() calls may be
+ * performed by the HAL for each request.
+ *
+ * Each call, all with the same frame
+ * number, may contain some subset of the output buffers, and/or the result
+ * metadata. The metadata may only be provided once for a given frame number;
+ * all other calls must set the result metadata to NULL.
+ *
+ * The result structure contains the output metadata from this capture, and the
+ * set of output buffers that have been/will be filled for this capture. Each
+ * output buffer may come with a release sync fence that the framework will wait
+ * on before reading, in case the buffer has not yet been filled by the HAL.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * The metadata may be provided multiple times for a single frame number. The
+ * framework will accumulate together the final result set by combining each
+ * partial result together into the total result set.
+ *
+ * If an input buffer is given in a request, the HAL must return it in one of
+ * the process_capture_result calls, and the call may be to just return the input
+ * buffer, without metadata and output buffers; the sync fences must be handled
+ * the same way they are done for output buffers.
+ *
+ *
+ * Performance considerations:
+ *
+ * Applications will also receive these partial results immediately, so sending
+ * partial results is a highly recommended performance optimization to avoid
+ * the total pipeline latency before sending the results for what is known very
+ * early on in the pipeline.
+ *
+ * A typical use case might be calculating the AF state halfway through the
+ * pipeline; by sending the state back to the framework immediately, we get a
+ * 50% performance increase and perceived responsiveness of the auto-focus.
+ *
+ */
+typedef struct camera3_capture_result {
+ /**
+ * The frame number is an incrementing integer set by the framework in the
+ * submitted request to uniquely identify this capture. It is also used to
+ * identify the request in asynchronous notifications sent to
+ * camera3_callback_ops_t.notify().
+ */
+ uint32_t frame_number;
+
+ /**
+ * The result metadata for this capture. This contains information about the
+ * final capture parameters, the state of the capture and post-processing
+ * hardware, the state of the 3A algorithms, if enabled, and the output of
+ * any enabled statistics units.
+ *
+ * Only one call to process_capture_result() with a given frame_number may
+ * include the result metadata. All other calls for the same frame_number
+ * must set this to NULL.
+ *
+ * If there was an error producing the result metadata, result must be an
+ * empty metadata buffer, and notify() must be called with ERROR_RESULT.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Multiple calls to process_capture_result() with a given frame_number
+ * may include the result metadata.
+ *
+ * Partial metadata submitted should not include any metadata key returned
+ * in a previous partial result for a given frame. Each new partial result
+ * for that frame must also set a distinct partial_result value.
+ *
+ * If notify has been called with ERROR_RESULT, all further partial
+ * results for that frame are ignored by the framework.
+ */
+ const camera_metadata_t *result;
+
+ /**
+ * The number of output buffers returned in this result structure. Must be
+ * less than or equal to the matching capture request's count. If this is
+ * less than the buffer count in the capture request, at least one more call
+ * to process_capture_result with the same frame_number must be made, to
+ * return the remaining output buffers to the framework. This may only be
+ * zero if the structure includes valid result metadata or an input buffer
+ * is returned in this result.
+ */
+ uint32_t num_output_buffers;
+
+ /**
+ * The handles for the output stream buffers for this capture. They may not
+ * yet be filled at the time the HAL calls process_capture_result(); the
+ * framework will wait on the release sync fences provided by the HAL before
+ * reading the buffers.
+ *
+ * The HAL must set the stream buffer's release sync fence to a valid sync
+ * fd, or to -1 if the buffer has already been filled.
+ *
+ * If the HAL encounters an error while processing the buffer, and the
+ * buffer is not filled, the buffer's status field must be set to
+ * CAMERA3_BUFFER_STATUS_ERROR. If the HAL did not wait on the acquire fence
+ * before encountering the error, the acquire fence should be copied into
+ * the release fence, to allow the framework to wait on the fence before
+ * reusing the buffer.
+ *
+ * The acquire fence must be set to -1 for all output buffers. If
+ * num_output_buffers is zero, this may be NULL. In that case, at least one
+ * more process_capture_result call must be made by the HAL to provide the
+ * output buffers.
+ *
+ * When process_capture_result is called with a new buffer for a frame,
+ * all previous frames' buffers for that corresponding stream must have been
+ * already delivered (the fences need not have yet been signaled).
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Gralloc buffers for a frame may be sent to framework before the
+ * corresponding SHUTTER-notify.
+ *
+ * Performance considerations:
+ *
+ * Buffers delivered to the framework will not be dispatched to the
+ * application layer until a start of exposure timestamp has been received
+ * via a SHUTTER notify() call. It is highly recommended to
+ * dispatch that call as early as possible.
+ */
+ const camera3_stream_buffer_t *output_buffers;
+
+ /**
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * The handle for the input stream buffer for this capture. It may not
+ * yet be consumed at the time the HAL calls process_capture_result(); the
+ * framework will wait on the release sync fences provided by the HAL before
+ * reusing the buffer.
+ *
+ * The HAL should handle the sync fences the same way they are done for
+ * output_buffers.
+ *
+ * Only one input buffer is allowed to be sent per request. Similarly to
+ * output buffers, the ordering of returned input buffers must be
+ * maintained by the HAL.
+ *
+ * Performance considerations:
+ *
+ * The input buffer should be returned as early as possible. If the HAL
+ * supports sync fences, it can call process_capture_result to hand it back
+ * with sync fences being set appropriately. If the sync fences are not
+ * supported, the buffer can only be returned when it is consumed, which
+ * may take long time; the HAL may choose to copy this input buffer to make
+ * the buffer return sooner.
+ */
+ const camera3_stream_buffer_t *input_buffer;
+
+ /**
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * In order to take advantage of partial results, the HAL must set the
+ * static metadata android.request.partialResultCount to the number of
+ * partial results it will send for each frame.
+ *
+ * Each new capture result with a partial result must set
+ * this field (partial_result) to a distinct inclusive value between
+ * 1 and android.request.partialResultCount.
+ *
+ * HALs not wishing to take advantage of this feature must not
+ * set an android.request.partialResultCount or partial_result to a value
+ * other than 1.
+ *
+ * This value must be set to 0 when a capture result contains buffers only
+ * and no metadata.
+ */
+ uint32_t partial_result;
+
+} camera3_capture_result_t;
+
+/**********************************************************************
+ *
+ * Callback methods for the HAL to call into the framework.
+ *
+ * These methods are used to return metadata and image buffers for a completed
+ * or failed captures, and to notify the framework of asynchronous events such
+ * as errors.
+ *
+ * The framework will not call back into the HAL from within these callbacks,
+ * and these calls will not block for extended periods.
+ *
+ */
+typedef struct camera3_callback_ops {
+
+ /**
+ * process_capture_result:
+ *
+ * Send results from a completed capture to the framework.
+ * process_capture_result() may be invoked multiple times by the HAL in
+ * response to a single capture request. This allows, for example, the
+ * metadata and low-resolution buffers to be returned in one call, and
+ * post-processed JPEG buffers in a later call, once it is available. Each
+ * call must include the frame number of the request it is returning
+ * metadata or buffers for.
+ *
+ * A component (buffer or metadata) of the complete result may only be
+ * included in one process_capture_result call. A buffer for each stream,
+ * and the result metadata, must be returned by the HAL for each request in
+ * one of the process_capture_result calls, even in case of errors producing
+ * some of the output. A call to process_capture_result() with neither
+ * output buffers or result metadata is not allowed.
+ *
+ * The order of returning metadata and buffers for a single result does not
+ * matter, but buffers for a given stream must be returned in FIFO order. So
+ * the buffer for request 5 for stream A must always be returned before the
+ * buffer for request 6 for stream A. This also applies to the result
+ * metadata; the metadata for request 5 must be returned before the metadata
+ * for request 6.
+ *
+ * However, different streams are independent of each other, so it is
+ * acceptable and expected that the buffer for request 5 for stream A may be
+ * returned after the buffer for request 6 for stream B is. And it is
+ * acceptable that the result metadata for request 6 for stream B is
+ * returned before the buffer for request 5 for stream A is.
+ *
+ * The HAL retains ownership of result structure, which only needs to be
+ * valid to access during this call. The framework will copy whatever it
+ * needs before this call returns.
+ *
+ * The output buffers do not need to be filled yet; the framework will wait
+ * on the stream buffer release sync fence before reading the buffer
+ * data. Therefore, this method should be called by the HAL as soon as
+ * possible, even if some or all of the output buffers are still in
+ * being filled. The HAL must include valid release sync fences into each
+ * output_buffers stream buffer entry, or -1 if that stream buffer is
+ * already filled.
+ *
+ * If the result buffer cannot be constructed for a request, the HAL should
+ * return an empty metadata buffer, but still provide the output buffers and
+ * their sync fences. In addition, notify() must be called with an
+ * ERROR_RESULT message.
+ *
+ * If an output buffer cannot be filled, its status field must be set to
+ * STATUS_ERROR. In addition, notify() must be called with a ERROR_BUFFER
+ * message.
+ *
+ * If the entire capture has failed, then this method still needs to be
+ * called to return the output buffers to the framework. All the buffer
+ * statuses should be STATUS_ERROR, and the result metadata should be an
+ * empty buffer. In addition, notify() must be called with a ERROR_REQUEST
+ * message. In this case, individual ERROR_RESULT/ERROR_BUFFER messages
+ * should not be sent.
+ *
+ * Performance requirements:
+ *
+ * This is a non-blocking call. The framework will return this call in 5ms.
+ *
+ * The pipeline latency (see S7 for definition) should be less than or equal to
+ * 4 frame intervals, and must be less than or equal to 8 frame intervals.
+ *
+ */
+ void (*process_capture_result)(const struct camera3_callback_ops *,
+ const camera3_capture_result_t *result);
+
+ /**
+ * notify:
+ *
+ * Asynchronous notification callback from the HAL, fired for various
+ * reasons. Only for information independent of frame capture, or that
+ * require specific timing. The ownership of the message structure remains
+ * with the HAL, and the msg only needs to be valid for the duration of this
+ * call.
+ *
+ * Multiple threads may call notify() simultaneously.
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * The notification for the start of exposure for a given request must be
+ * sent by the HAL before the first call to process_capture_result() for
+ * that request is made.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Buffers delivered to the framework will not be dispatched to the
+ * application layer until a start of exposure timestamp (or input image's
+ * start of exposure timestamp for a reprocess request) has been received
+ * via a SHUTTER notify() call. It is highly recommended to dispatch this
+ * call as early as possible.
+ *
+ * ------------------------------------------------------------------------
+ * Performance requirements:
+ *
+ * This is a non-blocking call. The framework will return this call in 5ms.
+ */
+ void (*notify)(const struct camera3_callback_ops *,
+ const camera3_notify_msg_t *msg);
+
+} camera3_callback_ops_t;
+
+/**********************************************************************
+ *
+ * Camera device operations
+ *
+ */
+typedef struct camera3_device_ops {
+
+ /**
+ * initialize:
+ *
+ * One-time initialization to pass framework callback function pointers to
+ * the HAL. Will be called once after a successful open() call, before any
+ * other functions are called on the camera3_device_ops structure.
+ *
+ * Performance requirements:
+ *
+ * This should be a non-blocking call. The HAL should return from this call
+ * in 5ms, and must return from this call in 10ms.
+ *
+ * Return values:
+ *
+ * 0: On successful initialization
+ *
+ * -ENODEV: If initialization fails. Only close() can be called successfully
+ * by the framework after this.
+ */
+ int (*initialize)(const struct camera3_device *,
+ const camera3_callback_ops_t *callback_ops);
+
+ /**********************************************************************
+ * Stream management
+ */
+
+ /**
+ * configure_streams:
+ *
+ * CAMERA_DEVICE_API_VERSION_3_0 only:
+ *
+ * Reset the HAL camera device processing pipeline and set up new input and
+ * output streams. This call replaces any existing stream configuration with
+ * the streams defined in the stream_list. This method will be called at
+ * least once after initialize() before a request is submitted with
+ * process_capture_request().
+ *
+ * The stream_list must contain at least one output-capable stream, and may
+ * not contain more than one input-capable stream.
+ *
+ * The stream_list may contain streams that are also in the currently-active
+ * set of streams (from the previous call to configure_stream()). These
+ * streams will already have valid values for usage, max_buffers, and the
+ * private pointer.
+ *
+ * If such a stream has already had its buffers registered,
+ * register_stream_buffers() will not be called again for the stream, and
+ * buffers from the stream can be immediately included in input requests.
+ *
+ * If the HAL needs to change the stream configuration for an existing
+ * stream due to the new configuration, it may rewrite the values of usage
+ * and/or max_buffers during the configure call.
+ *
+ * The framework will detect such a change, and will then reallocate the
+ * stream buffers, and call register_stream_buffers() again before using
+ * buffers from that stream in a request.
+ *
+ * If a currently-active stream is not included in stream_list, the HAL may
+ * safely remove any references to that stream. It will not be reused in a
+ * later configure() call by the framework, and all the gralloc buffers for
+ * it will be freed after the configure_streams() call returns.
+ *
+ * The stream_list structure is owned by the framework, and may not be
+ * accessed once this call completes. The address of an individual
+ * camera3_stream_t structure will remain valid for access by the HAL until
+ * the end of the first configure_stream() call which no longer includes
+ * that camera3_stream_t in the stream_list argument. The HAL may not change
+ * values in the stream structure outside of the private pointer, except for
+ * the usage and max_buffers members during the configure_streams() call
+ * itself.
+ *
+ * If the stream is new, the usage, max_buffer, and private pointer fields
+ * of the stream structure will all be set to 0. The HAL device must set
+ * these fields before the configure_streams() call returns. These fields
+ * are then used by the framework and the platform gralloc module to
+ * allocate the gralloc buffers for each stream.
+ *
+ * Before such a new stream can have its buffers included in a capture
+ * request, the framework will call register_stream_buffers() with that
+ * stream. However, the framework is not required to register buffers for
+ * _all_ streams before submitting a request. This allows for quick startup
+ * of (for example) a preview stream, with allocation for other streams
+ * happening later or concurrently.
+ *
+ * ------------------------------------------------------------------------
+ * CAMERA_DEVICE_API_VERSION_3_1 only:
+ *
+ * Reset the HAL camera device processing pipeline and set up new input and
+ * output streams. This call replaces any existing stream configuration with
+ * the streams defined in the stream_list. This method will be called at
+ * least once after initialize() before a request is submitted with
+ * process_capture_request().
+ *
+ * The stream_list must contain at least one output-capable stream, and may
+ * not contain more than one input-capable stream.
+ *
+ * The stream_list may contain streams that are also in the currently-active
+ * set of streams (from the previous call to configure_stream()). These
+ * streams will already have valid values for usage, max_buffers, and the
+ * private pointer.
+ *
+ * If such a stream has already had its buffers registered,
+ * register_stream_buffers() will not be called again for the stream, and
+ * buffers from the stream can be immediately included in input requests.
+ *
+ * If the HAL needs to change the stream configuration for an existing
+ * stream due to the new configuration, it may rewrite the values of usage
+ * and/or max_buffers during the configure call.
+ *
+ * The framework will detect such a change, and will then reallocate the
+ * stream buffers, and call register_stream_buffers() again before using
+ * buffers from that stream in a request.
+ *
+ * If a currently-active stream is not included in stream_list, the HAL may
+ * safely remove any references to that stream. It will not be reused in a
+ * later configure() call by the framework, and all the gralloc buffers for
+ * it will be freed after the configure_streams() call returns.
+ *
+ * The stream_list structure is owned by the framework, and may not be
+ * accessed once this call completes. The address of an individual
+ * camera3_stream_t structure will remain valid for access by the HAL until
+ * the end of the first configure_stream() call which no longer includes
+ * that camera3_stream_t in the stream_list argument. The HAL may not change
+ * values in the stream structure outside of the private pointer, except for
+ * the usage and max_buffers members during the configure_streams() call
+ * itself.
+ *
+ * If the stream is new, max_buffer, and private pointer fields of the
+ * stream structure will all be set to 0. The usage will be set to the
+ * consumer usage flags. The HAL device must set these fields before the
+ * configure_streams() call returns. These fields are then used by the
+ * framework and the platform gralloc module to allocate the gralloc
+ * buffers for each stream.
+ *
+ * Before such a new stream can have its buffers included in a capture
+ * request, the framework will call register_stream_buffers() with that
+ * stream. However, the framework is not required to register buffers for
+ * _all_ streams before submitting a request. This allows for quick startup
+ * of (for example) a preview stream, with allocation for other streams
+ * happening later or concurrently.
+ *
+ * ------------------------------------------------------------------------
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * Reset the HAL camera device processing pipeline and set up new input and
+ * output streams. This call replaces any existing stream configuration with
+ * the streams defined in the stream_list. This method will be called at
+ * least once after initialize() before a request is submitted with
+ * process_capture_request().
+ *
+ * The stream_list must contain at least one output-capable stream, and may
+ * not contain more than one input-capable stream.
+ *
+ * The stream_list may contain streams that are also in the currently-active
+ * set of streams (from the previous call to configure_stream()). These
+ * streams will already have valid values for usage, max_buffers, and the
+ * private pointer.
+ *
+ * If the HAL needs to change the stream configuration for an existing
+ * stream due to the new configuration, it may rewrite the values of usage
+ * and/or max_buffers during the configure call.
+ *
+ * The framework will detect such a change, and may then reallocate the
+ * stream buffers before using buffers from that stream in a request.
+ *
+ * If a currently-active stream is not included in stream_list, the HAL may
+ * safely remove any references to that stream. It will not be reused in a
+ * later configure() call by the framework, and all the gralloc buffers for
+ * it will be freed after the configure_streams() call returns.
+ *
+ * The stream_list structure is owned by the framework, and may not be
+ * accessed once this call completes. The address of an individual
+ * camera3_stream_t structure will remain valid for access by the HAL until
+ * the end of the first configure_stream() call which no longer includes
+ * that camera3_stream_t in the stream_list argument. The HAL may not change
+ * values in the stream structure outside of the private pointer, except for
+ * the usage and max_buffers members during the configure_streams() call
+ * itself.
+ *
+ * If the stream is new, max_buffer, and private pointer fields of the
+ * stream structure will all be set to 0. The usage will be set to the
+ * consumer usage flags. The HAL device must set these fields before the
+ * configure_streams() call returns. These fields are then used by the
+ * framework and the platform gralloc module to allocate the gralloc
+ * buffers for each stream.
+ *
+ * Newly allocated buffers may be included in a capture request at any time
+ * by the framework. Once a gralloc buffer is returned to the framework
+ * with process_capture_result (and its respective release_fence has been
+ * signaled) the framework may free or reuse it at any time.
+ *
+ * ------------------------------------------------------------------------
+ *
+ * Preconditions:
+ *
+ * The framework will only call this method when no captures are being
+ * processed. That is, all results have been returned to the framework, and
+ * all in-flight input and output buffers have been returned and their
+ * release sync fences have been signaled by the HAL. The framework will not
+ * submit new requests for capture while the configure_streams() call is
+ * underway.
+ *
+ * Postconditions:
+ *
+ * The HAL device must configure itself to provide maximum possible output
+ * frame rate given the sizes and formats of the output streams, as
+ * documented in the camera device's static metadata.
+ *
+ * Performance requirements:
+ *
+ * This call is expected to be heavyweight and possibly take several hundred
+ * milliseconds to complete, since it may require resetting and
+ * reconfiguring the image sensor and the camera processing pipeline.
+ * Nevertheless, the HAL device should attempt to minimize the
+ * reconfiguration delay to minimize the user-visible pauses during
+ * application operational mode changes (such as switching from still
+ * capture to video recording).
+ *
+ * The HAL should return from this call in 500ms, and must return from this
+ * call in 1000ms.
+ *
+ * Return values:
+ *
+ * 0: On successful stream configuration
+ *
+ * -EINVAL: If the requested stream configuration is invalid. Some examples
+ * of invalid stream configurations include:
+ *
+ * - Including more than 1 input-capable stream (INPUT or
+ * BIDIRECTIONAL)
+ *
+ * - Not including any output-capable streams (OUTPUT or
+ * BIDIRECTIONAL)
+ *
+ * - Including streams with unsupported formats, or an unsupported
+ * size for that format.
+ *
+ * - Including too many output streams of a certain format.
+ *
+ * - Unsupported rotation configuration (only applies to
+ * devices with version >= CAMERA_DEVICE_API_VERSION_3_3)
+ *
+ * - Stream sizes/formats don't satisfy the
+ * camera3_stream_configuration_t->operation_mode requirements for non-NORMAL mode,
+ * or the requested operation_mode is not supported by the HAL.
+ * (only applies to devices with version >= CAMERA_DEVICE_API_VERSION_3_3)
+ *
+ * Note that the framework submitting an invalid stream
+ * configuration is not normal operation, since stream
+ * configurations are checked before configure. An invalid
+ * configuration means that a bug exists in the framework code, or
+ * there is a mismatch between the HAL's static metadata and the
+ * requirements on streams.
+ *
+ * -ENODEV: If there has been a fatal error and the device is no longer
+ * operational. Only close() can be called successfully by the
+ * framework after this error is returned.
+ */
+ int (*configure_streams)(const struct camera3_device *,
+ camera3_stream_configuration_t *stream_list);
+
+ /**
+ * register_stream_buffers:
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * DEPRECATED. This will not be called and must be set to NULL.
+ *
+ * <= CAMERA_DEVICE_API_VERSION_3_1:
+ *
+ * Register buffers for a given stream with the HAL device. This method is
+ * called by the framework after a new stream is defined by
+ * configure_streams, and before buffers from that stream are included in a
+ * capture request. If the same stream is listed in a subsequent
+ * configure_streams() call, register_stream_buffers will _not_ be called
+ * again for that stream.
+ *
+ * The framework does not need to register buffers for all configured
+ * streams before it submits the first capture request. This allows quick
+ * startup for preview (or similar use cases) while other streams are still
+ * being allocated.
+ *
+ * This method is intended to allow the HAL device to map or otherwise
+ * prepare the buffers for later use. The buffers passed in will already be
+ * locked for use. At the end of the call, all the buffers must be ready to
+ * be returned to the stream. The buffer_set argument is only valid for the
+ * duration of this call.
+ *
+ * If the stream format was set to HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED,
+ * the camera HAL should inspect the passed-in buffers here to determine any
+ * platform-private pixel format information.
+ *
+ * Performance requirements:
+ *
+ * This should be a non-blocking call. The HAL should return from this call
+ * in 1ms, and must return from this call in 5ms.
+ *
+ * Return values:
+ *
+ * 0: On successful registration of the new stream buffers
+ *
+ * -EINVAL: If the stream_buffer_set does not refer to a valid active
+ * stream, or if the buffers array is invalid.
+ *
+ * -ENOMEM: If there was a failure in registering the buffers. The framework
+ * must consider all the stream buffers to be unregistered, and can
+ * try to register again later.
+ *
+ * -ENODEV: If there is a fatal error, and the device is no longer
+ * operational. Only close() can be called successfully by the
+ * framework after this error is returned.
+ */
+ int (*register_stream_buffers)(const struct camera3_device *,
+ const camera3_stream_buffer_set_t *buffer_set);
+
+ /**********************************************************************
+ * Request creation and submission
+ */
+
+ /**
+ * construct_default_request_settings:
+ *
+ * Create capture settings for standard camera use cases.
+ *
+ * The device must return a settings buffer that is configured to meet the
+ * requested use case, which must be one of the CAMERA3_TEMPLATE_*
+ * enums. All request control fields must be included.
+ *
+ * The HAL retains ownership of this structure, but the pointer to the
+ * structure must be valid until the device is closed. The framework and the
+ * HAL may not modify the buffer once it is returned by this call. The same
+ * buffer may be returned for subsequent calls for the same template, or for
+ * other templates.
+ *
+ * Performance requirements:
+ *
+ * This should be a non-blocking call. The HAL should return from this call
+ * in 1ms, and must return from this call in 5ms.
+ *
+ * Return values:
+ *
+ * Valid metadata: On successful creation of a default settings
+ * buffer.
+ *
+ * NULL: In case of a fatal error. After this is returned, only
+ * the close() method can be called successfully by the
+ * framework.
+ */
+ const camera_metadata_t* (*construct_default_request_settings)(
+ const struct camera3_device *,
+ int type);
+
+ /**
+ * process_capture_request:
+ *
+ * Send a new capture request to the HAL. The HAL should not return from
+ * this call until it is ready to accept the next request to process. Only
+ * one call to process_capture_request() will be made at a time by the
+ * framework, and the calls will all be from the same thread. The next call
+ * to process_capture_request() will be made as soon as a new request and
+ * its associated buffers are available. In a normal preview scenario, this
+ * means the function will be called again by the framework almost
+ * instantly.
+ *
+ * The actual request processing is asynchronous, with the results of
+ * capture being returned by the HAL through the process_capture_result()
+ * call. This call requires the result metadata to be available, but output
+ * buffers may simply provide sync fences to wait on. Multiple requests are
+ * expected to be in flight at once, to maintain full output frame rate.
+ *
+ * The framework retains ownership of the request structure. It is only
+ * guaranteed to be valid during this call. The HAL device must make copies
+ * of the information it needs to retain for the capture processing. The HAL
+ * is responsible for waiting on and closing the buffers' fences and
+ * returning the buffer handles to the framework.
+ *
+ * The HAL must write the file descriptor for the input buffer's release
+ * sync fence into input_buffer->release_fence, if input_buffer is not
+ * NULL. If the HAL returns -1 for the input buffer release sync fence, the
+ * framework is free to immediately reuse the input buffer. Otherwise, the
+ * framework will wait on the sync fence before refilling and reusing the
+ * input buffer.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ *
+ * The input/output buffers provided by the framework in each request
+ * may be brand new (having never before seen by the HAL).
+ *
+ * ------------------------------------------------------------------------
+ * Performance considerations:
+ *
+ * Handling a new buffer should be extremely lightweight and there should be
+ * no frame rate degradation or frame jitter introduced.
+ *
+ * This call must return fast enough to ensure that the requested frame
+ * rate can be sustained, especially for streaming cases (post-processing
+ * quality settings set to FAST). The HAL should return this call in 1
+ * frame interval, and must return from this call in 4 frame intervals.
+ *
+ * Return values:
+ *
+ * 0: On a successful start to processing the capture request
+ *
+ * -EINVAL: If the input is malformed (the settings are NULL when not
+ * allowed, there are 0 output buffers, etc) and capture processing
+ * cannot start. Failures during request processing should be
+ * handled by calling camera3_callback_ops_t.notify(). In case of
+ * this error, the framework will retain responsibility for the
+ * stream buffers' fences and the buffer handles; the HAL should
+ * not close the fences or return these buffers with
+ * process_capture_result.
+ *
+ * -ENODEV: If the camera device has encountered a serious error. After this
+ * error is returned, only the close() method can be successfully
+ * called by the framework.
+ *
+ */
+ int (*process_capture_request)(const struct camera3_device *,
+ camera3_capture_request_t *request);
+
+ /**********************************************************************
+ * Miscellaneous methods
+ */
+
+ /**
+ * get_metadata_vendor_tag_ops:
+ *
+ * Get methods to query for vendor extension metadata tag information. The
+ * HAL should fill in all the vendor tag operation methods, or leave ops
+ * unchanged if no vendor tags are defined.
+ *
+ * The definition of vendor_tag_query_ops_t can be found in
+ * system/media/camera/include/system/camera_metadata.h.
+ *
+ * >= CAMERA_DEVICE_API_VERSION_3_2:
+ * DEPRECATED. This function has been deprecated and should be set to
+ * NULL by the HAL. Please implement get_vendor_tag_ops in camera_common.h
+ * instead.
+ */
+ void (*get_metadata_vendor_tag_ops)(const struct camera3_device*,
+ vendor_tag_query_ops_t* ops);
+
+ /**
+ * dump:
+ *
+ * Print out debugging state for the camera device. This will be called by
+ * the framework when the camera service is asked for a debug dump, which
+ * happens when using the dumpsys tool, or when capturing a bugreport.
+ *
+ * The passed-in file descriptor can be used to write debugging text using
+ * dprintf() or write(). The text should be in ASCII encoding only.
+ *
+ * Performance requirements:
+ *
+ * This must be a non-blocking call. The HAL should return from this call
+ * in 1ms, must return from this call in 10ms. This call must avoid
+ * deadlocks, as it may be called at any point during camera operation.
+ * Any synchronization primitives used (such as mutex locks or semaphores)
+ * should be acquired with a timeout.
+ */
+ void (*dump)(const struct camera3_device *, int fd);
+
+ /**
+ * flush:
+ *
+ * Flush all currently in-process captures and all buffers in the pipeline
+ * on the given device. The framework will use this to dump all state as
+ * quickly as possible in order to prepare for a configure_streams() call.
+ *
+ * No buffers are required to be successfully returned, so every buffer
+ * held at the time of flush() (whether successfully filled or not) may be
+ * returned with CAMERA3_BUFFER_STATUS_ERROR. Note the HAL is still allowed
+ * to return valid (CAMERA3_BUFFER_STATUS_OK) buffers during this call,
+ * provided they are successfully filled.
+ *
+ * All requests currently in the HAL are expected to be returned as soon as
+ * possible. Not-in-process requests should return errors immediately. Any
+ * interruptible hardware blocks should be stopped, and any uninterruptible
+ * blocks should be waited on.
+ *
+ * flush() may be called concurrently to process_capture_request(), with the expectation that
+ * process_capture_request will return quickly and the request submitted in that
+ * process_capture_request call is treated like all other in-flight requests. Due to
+ * concurrency issues, it is possible that from the HAL's point of view, a
+ * process_capture_request() call may be started after flush has been invoked but has not
+ * returned yet. If such a call happens before flush() returns, the HAL should treat the new
+ * capture request like other in-flight pending requests (see #4 below).
+ *
+ * More specifically, the HAL must follow below requirements for various cases:
+ *
+ * 1. For captures that are too late for the HAL to cancel/stop, and will be
+ * completed normally by the HAL; i.e. the HAL can send shutter/notify and
+ * process_capture_result and buffers as normal.
+ *
+ * 2. For pending requests that have not done any processing, the HAL must call notify
+ * CAMERA3_MSG_ERROR_REQUEST, and return all the output buffers with
+ * process_capture_result in the error state (CAMERA3_BUFFER_STATUS_ERROR).
+ * The HAL must not place the release fence into an error state, instead,
+ * the release fences must be set to the acquire fences passed by the framework,
+ * or -1 if they have been waited on by the HAL already. This is also the path
+ * to follow for any captures for which the HAL already called notify() with
+ * CAMERA3_MSG_SHUTTER but won't be producing any metadata/valid buffers for.
+ * After CAMERA3_MSG_ERROR_REQUEST, for a given frame, only process_capture_results with
+ * buffers in CAMERA3_BUFFER_STATUS_ERROR are allowed. No further notifys or
+ * process_capture_result with non-null metadata is allowed.
+ *
+ * 3. For partially completed pending requests that will not have all the output
+ * buffers or perhaps missing metadata, the HAL should follow below:
+ *
+ * 3.1. Call notify with CAMERA3_MSG_ERROR_RESULT if some of the expected result
+ * metadata (i.e. one or more partial metadata) won't be available for the capture.
+ *
+ * 3.2. Call notify with CAMERA3_MSG_ERROR_BUFFER for every buffer that won't
+ * be produced for the capture.
+ *
+ * 3.3 Call notify with CAMERA3_MSG_SHUTTER with the capture timestamp before
+ * any buffers/metadata are returned with process_capture_result.
+ *
+ * 3.4 For captures that will produce some results, the HAL must not call
+ * CAMERA3_MSG_ERROR_REQUEST, since that indicates complete failure.
+ *
+ * 3.5. Valid buffers/metadata should be passed to the framework as normal.
+ *
+ * 3.6. Failed buffers should be returned to the framework as described for case 2.
+ * But failed buffers do not have to follow the strict ordering valid buffers do,
+ * and may be out-of-order with respect to valid buffers. For example, if buffers
+ * A, B, C, D, E are sent, D and E are failed, then A, E, B, D, C is an acceptable
+ * return order.
+ *
+ * 3.7. For fully-missing metadata, calling CAMERA3_MSG_ERROR_RESULT is sufficient, no
+ * need to call process_capture_result with NULL metadata or equivalent.
+ *
+ * 4. If a flush() is invoked while a process_capture_request() invocation is active, that
+ * process call should return as soon as possible. In addition, if a process_capture_request()
+ * call is made after flush() has been invoked but before flush() has returned, the
+ * capture request provided by the late process_capture_request call should be treated like
+ * a pending request in case #2 above.
+ *
+ * flush() should only return when there are no more outstanding buffers or
+ * requests left in the HAL. The framework may call configure_streams (as
+ * the HAL state is now quiesced) or may issue new requests.
+ *
+ * Note that it's sufficient to only support fully-succeeded and fully-failed result cases.
+ * However, it is highly desirable to support the partial failure cases as well, as it
+ * could help improve the flush call overall performance.
+ *
+ * Performance requirements:
+ *
+ * The HAL should return from this call in 100ms, and must return from this
+ * call in 1000ms. And this call must not be blocked longer than pipeline
+ * latency (see S7 for definition).
+ *
+ * Version information:
+ *
+ * only available if device version >= CAMERA_DEVICE_API_VERSION_3_1.
+ *
+ * Return values:
+ *
+ * 0: On a successful flush of the camera HAL.
+ *
+ * -EINVAL: If the input is malformed (the device is not valid).
+ *
+ * -ENODEV: If the camera device has encountered a serious error. After this
+ * error is returned, only the close() method can be successfully
+ * called by the framework.
+ */
+ int (*flush)(const struct camera3_device *);
+
+ /* reserved for future use */
+ void *reserved[8];
+} camera3_device_ops_t;
+
+/**********************************************************************
+ *
+ * Camera device definition
+ *
+ */
+typedef struct camera3_device {
+ /**
+ * common.version must equal CAMERA_DEVICE_API_VERSION_3_0 to identify this
+ * device as implementing version 3.0 of the camera device HAL.
+ *
+ * Performance requirements:
+ *
+ * Camera open (common.module->common.methods->open) should return in 200ms, and must return
+ * in 500ms.
+ * Camera close (common.close) should return in 200ms, and must return in 500ms.
+ *
+ */
+ hw_device_t common;
+ camera3_device_ops_t *ops;
+ void *priv;
+} camera3_device_t;
+
+__END_DECLS
+
+#endif /* #ifdef ANDROID_INCLUDE_CAMERA3_H */
diff --git a/include/android/hardware/libhardware/include/hardware/camera_common.h b/include/android/hardware/libhardware/include/hardware/camera_common.h
new file mode 100644
index 00000000..7658dd40
--- /dev/null
+++ b/include/android/hardware/libhardware/include/hardware/camera_common.h
@@ -0,0 +1,916 @@
+/*
+ * Copyright (C) 2012 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+// FIXME: add well-defined names for cameras
+
+#ifndef ANDROID_INCLUDE_CAMERA_COMMON_H
+#define ANDROID_INCLUDE_CAMERA_COMMON_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+#include <cutils/native_handle.h>
+#include <system/camera.h>
+#include <system/camera_vendor_tags.h>
+#include <hardware/hardware.h>
+#include <hardware/gralloc.h>
+
+__BEGIN_DECLS
+
+/**
+ * The id of this module
+ */
+#define CAMERA_HARDWARE_MODULE_ID "camera"
+
+/**
+ * Module versioning information for the Camera hardware module, based on
+ * camera_module_t.common.module_api_version. The two most significant hex
+ * digits represent the major version, and the two least significant represent
+ * the minor version.
+ *
+ *******************************************************************************
+ * Versions: 0.X - 1.X [CAMERA_MODULE_API_VERSION_1_0]
+ *
+ * Camera modules that report these version numbers implement the initial
+ * camera module HAL interface. All camera devices openable through this
+ * module support only version 1 of the camera device HAL. The device_version
+ * and static_camera_characteristics fields of camera_info are not valid. Only
+ * the android.hardware.Camera API can be supported by this module and its
+ * devices.
+ *
+ *******************************************************************************
+ * Version: 2.0 [CAMERA_MODULE_API_VERSION_2_0]
+ *
+ * Camera modules that report this version number implement the second version
+ * of the camera module HAL interface. Camera devices openable through this
+ * module may support either version 1.0 or version 2.0 of the camera device
+ * HAL interface. The device_version field of camera_info is always valid; the
+ * static_camera_characteristics field of camera_info is valid if the
+ * device_version field is 2.0 or higher.
+ *
+ *******************************************************************************
+ * Version: 2.1 [CAMERA_MODULE_API_VERSION_2_1]
+ *
+ * This camera module version adds support for asynchronous callbacks to the
+ * framework from the camera HAL module, which is used to notify the framework
+ * about changes to the camera module state. Modules that provide a valid
+ * set_callbacks() method must report at least this version number.
+ *
+ *******************************************************************************
+ * Version: 2.2 [CAMERA_MODULE_API_VERSION_2_2]
+ *
+ * This camera module version adds vendor tag support from the module, and
+ * deprecates the old vendor_tag_query_ops that were previously only
+ * accessible with a device open.
+ *
+ *******************************************************************************
+ * Version: 2.3 [CAMERA_MODULE_API_VERSION_2_3]
+ *
+ * This camera module version adds open legacy camera HAL device support.
+ * Framework can use it to open the camera device as lower device HAL version
+ * HAL device if the same device can support multiple device API versions.
+ * The standard hardware module open call (common.methods->open) continues
+ * to open the camera device with the latest supported version, which is
+ * also the version listed in camera_info_t.device_version.
+ *
+ *******************************************************************************
+ * Version: 2.4 [CAMERA_MODULE_API_VERSION_2_4]
+ *
+ * This camera module version adds below API changes:
+ *
+ * 1. Torch mode support. The framework can use it to turn on torch mode for
+ * any camera device that has a flash unit, without opening a camera device. The
+ * camera device has a higher priority accessing the flash unit than the camera
+ * module; opening a camera device will turn off the torch if it had been enabled
+ * through the module interface. When there are any resource conflicts, such as
+ * open() is called to open a camera device, the camera HAL module must notify the
+ * framework through the torch mode status callback that the torch mode has been
+ * turned off.
+ *
+ * 2. External camera (e.g. USB hot-plug camera) support. The API updates specify that
+ * the camera static info is only available when camera is connected and ready to
+ * use for external hot-plug cameras. Calls to get static info will be invalid
+ * calls when camera status is not CAMERA_DEVICE_STATUS_PRESENT. The frameworks
+ * will only count on device status change callbacks to manage the available external
+ * camera list.
+ *
+ * 3. Camera arbitration hints. This module version adds support for explicitly
+ * indicating the number of camera devices that can be simultaneously opened and used.
+ * To specify valid combinations of devices, the resource_cost and conflicting_devices
+ * fields should always be set in the camera_info structure returned by the
+ * get_camera_info call.
+ *
+ * 4. Module initialization method. This will be called by the camera service
+ * right after the HAL module is loaded, to allow for one-time initialization
+ * of the HAL. It is called before any other module methods are invoked.
+ */
+
+/**
+ * Predefined macros for currently-defined version numbers
+ */
+
+/**
+ * All module versions <= HARDWARE_MODULE_API_VERSION(1, 0xFF) must be treated
+ * as CAMERA_MODULE_API_VERSION_1_0
+ */
+#define CAMERA_MODULE_API_VERSION_1_0 HARDWARE_MODULE_API_VERSION(1, 0)
+#define CAMERA_MODULE_API_VERSION_2_0 HARDWARE_MODULE_API_VERSION(2, 0)
+#define CAMERA_MODULE_API_VERSION_2_1 HARDWARE_MODULE_API_VERSION(2, 1)
+#define CAMERA_MODULE_API_VERSION_2_2 HARDWARE_MODULE_API_VERSION(2, 2)
+#define CAMERA_MODULE_API_VERSION_2_3 HARDWARE_MODULE_API_VERSION(2, 3)
+#define CAMERA_MODULE_API_VERSION_2_4 HARDWARE_MODULE_API_VERSION(2, 4)
+
+#define CAMERA_MODULE_API_VERSION_CURRENT CAMERA_MODULE_API_VERSION_2_4
+
+/**
+ * All device versions <= HARDWARE_DEVICE_API_VERSION(1, 0xFF) must be treated
+ * as CAMERA_DEVICE_API_VERSION_1_0
+ */
+#define CAMERA_DEVICE_API_VERSION_1_0 HARDWARE_DEVICE_API_VERSION(1, 0)
+#define CAMERA_DEVICE_API_VERSION_2_0 HARDWARE_DEVICE_API_VERSION(2, 0)
+#define CAMERA_DEVICE_API_VERSION_2_1 HARDWARE_DEVICE_API_VERSION(2, 1)
+#define CAMERA_DEVICE_API_VERSION_3_0 HARDWARE_DEVICE_API_VERSION(3, 0)
+#define CAMERA_DEVICE_API_VERSION_3_1 HARDWARE_DEVICE_API_VERSION(3, 1)
+#define CAMERA_DEVICE_API_VERSION_3_2 HARDWARE_DEVICE_API_VERSION(3, 2)
+#define CAMERA_DEVICE_API_VERSION_3_3 HARDWARE_DEVICE_API_VERSION(3, 3)
+
+// Device version 3.3 is current, older HAL camera device versions are not
+// recommended for new devices.
+#define CAMERA_DEVICE_API_VERSION_CURRENT CAMERA_DEVICE_API_VERSION_3_3
+
+/**
+ * Defined in /system/media/camera/include/system/camera_metadata.h
+ */
+typedef struct camera_metadata camera_metadata_t;
+
+typedef struct camera_info {
+ /**
+ * The direction that the camera faces to. See system/core/include/system/camera.h
+ * for camera facing definitions.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * It should be CAMERA_FACING_BACK or CAMERA_FACING_FRONT.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4 or higher:
+ *
+ * It should be CAMERA_FACING_BACK, CAMERA_FACING_FRONT or
+ * CAMERA_FACING_EXTERNAL.
+ */
+ int facing;
+
+ /**
+ * The orientation of the camera image. The value is the angle that the
+ * camera image needs to be rotated clockwise so it shows correctly on the
+ * display in its natural orientation. It should be 0, 90, 180, or 270.
+ *
+ * For example, suppose a device has a naturally tall screen. The
+ * back-facing camera sensor is mounted in landscape. You are looking at the
+ * screen. If the top side of the camera sensor is aligned with the right
+ * edge of the screen in natural orientation, the value should be 90. If the
+ * top side of a front-facing camera sensor is aligned with the right of the
+ * screen, the value should be 270.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * Valid in all camera_module versions.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4 or higher:
+ *
+ * Valid if camera facing is CAMERA_FACING_BACK or CAMERA_FACING_FRONT,
+ * not valid if camera facing is CAMERA_FACING_EXTERNAL.
+ */
+ int orientation;
+
+ /**
+ * The value of camera_device_t.common.version.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_1_0:
+ *
+ * Not valid. Can be assumed to be CAMERA_DEVICE_API_VERSION_1_0. Do
+ * not read this field.
+ *
+ * CAMERA_MODULE_API_VERSION_2_0 or higher:
+ *
+ * Always valid
+ *
+ */
+ uint32_t device_version;
+
+ /**
+ * The camera's fixed characteristics, which include all static camera metadata
+ * specified in system/media/camera/docs/docs.html. This should be a sorted metadata
+ * buffer, and may not be modified or freed by the caller. The pointer should remain
+ * valid for the lifetime of the camera module, and values in it may not
+ * change after it is returned by get_camera_info().
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_1_0:
+ *
+ * Not valid. Extra characteristics are not available. Do not read this
+ * field.
+ *
+ * CAMERA_MODULE_API_VERSION_2_0 or higher:
+ *
+ * Valid if device_version >= CAMERA_DEVICE_API_VERSION_2_0. Do not read
+ * otherwise.
+ *
+ */
+ const camera_metadata_t *static_camera_characteristics;
+
+ /**
+ * The total resource "cost" of using this camera, represented as an integer
+ * value in the range [0, 100] where 100 represents total usage of the shared
+ * resource that is the limiting bottleneck of the camera subsystem. This may
+ * be a very rough estimate, and is used as a hint to the camera service to
+ * determine when to disallow multiple applications from simultaneously
+ * opening different cameras advertised by the camera service.
+ *
+ * The camera service must be able to simultaneously open and use any
+ * combination of camera devices exposed by the HAL where the sum of
+ * the resource costs of these cameras is <= 100. For determining cost,
+ * each camera device must be assumed to be configured and operating at
+ * the maximally resource-consuming framerate and stream size settings
+ * available in the configuration settings exposed for that device through
+ * the camera metadata.
+ *
+ * The camera service may still attempt to simultaneously open combinations
+ * of camera devices with a total resource cost > 100. This may succeed or
+ * fail. If this succeeds, combinations of configurations that are not
+ * supported due to resource constraints from having multiple open devices
+ * should fail during the configure calls. If the total resource cost is
+ * <= 100, open and configure should never fail for any stream configuration
+ * settings or other device capabilities that would normally succeed for a
+ * device when it is the only open camera device.
+ *
+ * This field will be used to determine whether background applications are
+ * allowed to use this camera device while other applications are using other
+ * camera devices. Note: multiple applications will never be allowed by the
+ * camera service to simultaneously open the same camera device.
+ *
+ * Example use cases:
+ *
+ * Ex. 1: Camera Device 0 = Back Camera
+ * Camera Device 1 = Front Camera
+ * - Using both camera devices causes a large framerate slowdown due to
+ * limited ISP bandwidth.
+ *
+ * Configuration:
+ *
+ * Camera Device 0 - resource_cost = 51
+ * conflicting_devices = null
+ * Camera Device 1 - resource_cost = 51
+ * conflicting_devices = null
+ *
+ * Result:
+ *
+ * Since the sum of the resource costs is > 100, if a higher-priority
+ * application has either device open, no lower-priority applications will be
+ * allowed by the camera service to open either device. If a lower-priority
+ * application is using a device that a higher-priority subsequently attempts
+ * to open, the lower-priority application will be forced to disconnect the
+ * the device.
+ *
+ * If the highest-priority application chooses, it may still attempt to open
+ * both devices (since these devices are not listed as conflicting in the
+ * conflicting_devices fields), but usage of these devices may fail in the
+ * open or configure calls.
+ *
+ * Ex. 2: Camera Device 0 = Left Back Camera
+ * Camera Device 1 = Right Back Camera
+ * Camera Device 2 = Combined stereo camera using both right and left
+ * back camera sensors used by devices 0, and 1
+ * Camera Device 3 = Front Camera
+ * - Due to do hardware constraints, up to two cameras may be open at once. The
+ * combined stereo camera may never be used at the same time as either of the
+ * two back camera devices (device 0, 1), and typically requires too much
+ * bandwidth to use at the same time as the front camera (device 3).
+ *
+ * Configuration:
+ *
+ * Camera Device 0 - resource_cost = 50
+ * conflicting_devices = { 2 }
+ * Camera Device 1 - resource_cost = 50
+ * conflicting_devices = { 2 }
+ * Camera Device 2 - resource_cost = 100
+ * conflicting_devices = { 0, 1 }
+ * Camera Device 3 - resource_cost = 50
+ * conflicting_devices = null
+ *
+ * Result:
+ *
+ * Based on the conflicting_devices fields, the camera service guarantees that
+ * the following sets of open devices will never be allowed: { 1, 2 }, { 0, 2 }.
+ *
+ * Based on the resource_cost fields, if a high-priority foreground application
+ * is using camera device 0, a background application would be allowed to open
+ * camera device 1 or 3 (but would be forced to disconnect it again if the
+ * foreground application opened another device).
+ *
+ * The highest priority application may still attempt to simultaneously open
+ * devices 0, 2, and 3, but the HAL may fail in open or configure calls for
+ * this combination.
+ *
+ * Ex. 3: Camera Device 0 = Back Camera
+ * Camera Device 1 = Front Camera
+ * Camera Device 2 = Low-power Front Camera that uses the same
+ * sensor as device 1, but only exposes image stream
+ * resolutions that can be used in low-power mode
+ * - Using both front cameras (device 1, 2) at the same time is impossible due
+ * a shared physical sensor. Using the back and "high-power" front camera
+ * (device 1) may be impossible for some stream configurations due to hardware
+ * limitations, but the "low-power" front camera option may always be used as
+ * it has special dedicated hardware.
+ *
+ * Configuration:
+ *
+ * Camera Device 0 - resource_cost = 100
+ * conflicting_devices = null
+ * Camera Device 1 - resource_cost = 100
+ * conflicting_devices = { 2 }
+ * Camera Device 2 - resource_cost = 0
+ * conflicting_devices = { 1 }
+ * Result:
+ *
+ * Based on the conflicting_devices fields, the camera service guarantees that
+ * the following sets of open devices will never be allowed: { 1, 2 }.
+ *
+ * Based on the resource_cost fields, only the highest priority application
+ * may attempt to open both device 0 and 1 at the same time. If a higher-priority
+ * application is not using device 1 or 2, a low-priority background application
+ * may open device 2 (but will be forced to disconnect it if a higher-priority
+ * application subsequently opens device 1 or 2).
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * Not valid. Can be assumed to be 100. Do not read this field.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4 or higher:
+ *
+ * Always valid.
+ */
+ int resource_cost;
+
+ /**
+ * An array of camera device IDs represented as NULL-terminated strings
+ * indicating other devices that cannot be simultaneously opened while this
+ * camera device is in use.
+ *
+ * This field is intended to be used to indicate that this camera device
+ * is a composite of several other camera devices, or otherwise has
+ * hardware dependencies that prohibit simultaneous usage. If there are no
+ * dependencies, a NULL may be returned in this field to indicate this.
+ *
+ * The camera service will never simultaneously open any of the devices
+ * in this list while this camera device is open.
+ *
+ * The strings pointed to in this field will not be cleaned up by the camera
+ * service, and must remain while this device is plugged in.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * Not valid. Can be assumed to be NULL. Do not read this field.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4 or higher:
+ *
+ * Always valid.
+ */
+ char** conflicting_devices;
+
+ /**
+ * The length of the array given in the conflicting_devices field.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * Not valid. Can be assumed to be 0. Do not read this field.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4 or higher:
+ *
+ * Always valid.
+ */
+ size_t conflicting_devices_length;
+
+} camera_info_t;
+
+/**
+ * camera_device_status_t:
+ *
+ * The current status of the camera device, as provided by the HAL through the
+ * camera_module_callbacks.camera_device_status_change() call.
+ *
+ * At module load time, the framework will assume all camera devices are in the
+ * CAMERA_DEVICE_STATUS_PRESENT state. The HAL should invoke
+ * camera_module_callbacks::camera_device_status_change to inform the framework
+ * of any initially NOT_PRESENT devices.
+ *
+ * Allowed transitions:
+ * PRESENT -> NOT_PRESENT
+ * NOT_PRESENT -> ENUMERATING
+ * NOT_PRESENT -> PRESENT
+ * ENUMERATING -> PRESENT
+ * ENUMERATING -> NOT_PRESENT
+ */
+typedef enum camera_device_status {
+ /**
+ * The camera device is not currently connected, and opening it will return
+ * failure.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * Calls to get_camera_info must still succeed, and provide the same information
+ * it would if the camera were connected.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4:
+ *
+ * The camera device at this status must return -EINVAL for get_camera_info call,
+ * as the device is not connected.
+ */
+ CAMERA_DEVICE_STATUS_NOT_PRESENT = 0,
+
+ /**
+ * The camera device is connected, and opening it will succeed.
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * The information returned by get_camera_info cannot change due to this status
+ * change. By default, the framework will assume all devices are in this state.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4:
+ *
+ * The information returned by get_camera_info will become valid after a device's
+ * status changes to this. By default, the framework will assume all devices are in
+ * this state.
+ */
+ CAMERA_DEVICE_STATUS_PRESENT = 1,
+
+ /**
+ * The camera device is connected, but it is undergoing an enumeration and
+ * so opening the device will return -EBUSY.
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * Calls to get_camera_info must still succeed, as if the camera was in the
+ * PRESENT status.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4:
+ *
+ * The camera device at this status must return -EINVAL for get_camera_info for call,
+ * as the device is not ready.
+ */
+ CAMERA_DEVICE_STATUS_ENUMERATING = 2,
+
+} camera_device_status_t;
+
+/**
+ * torch_mode_status_t:
+ *
+ * The current status of the torch mode, as provided by the HAL through the
+ * camera_module_callbacks.torch_mode_status_change() call.
+ *
+ * The torch mode status of a camera device is applicable only when the camera
+ * device is present. The framework will not call set_torch_mode() to turn on
+ * torch mode of a camera device if the camera device is not present. At module
+ * load time, the framework will assume torch modes are in the
+ * TORCH_MODE_STATUS_AVAILABLE_OFF state if the camera device is present and
+ * android.flash.info.available is reported as true via get_camera_info() call.
+ *
+ * The behaviors of the camera HAL module that the framework expects in the
+ * following situations when a camera device's status changes:
+ * 1. A previously-disconnected camera device becomes connected.
+ * After camera_module_callbacks::camera_device_status_change() is invoked
+ * to inform the framework that the camera device is present, the framework
+ * will assume the camera device's torch mode is in
+ * TORCH_MODE_STATUS_AVAILABLE_OFF state. The camera HAL module does not need
+ * to invoke camera_module_callbacks::torch_mode_status_change() unless the
+ * flash unit is unavailable to use by set_torch_mode().
+ *
+ * 2. A previously-connected camera becomes disconnected.
+ * After camera_module_callbacks::camera_device_status_change() is invoked
+ * to inform the framework that the camera device is not present, the
+ * framework will not call set_torch_mode() for the disconnected camera
+ * device until its flash unit becomes available again. The camera HAL
+ * module does not need to invoke
+ * camera_module_callbacks::torch_mode_status_change() separately to inform
+ * that the flash unit has become unavailable.
+ *
+ * 3. open() is called to open a camera device.
+ * The camera HAL module must invoke
+ * camera_module_callbacks::torch_mode_status_change() for all flash units
+ * that have entered TORCH_MODE_STATUS_NOT_AVAILABLE state and can not be
+ * turned on by calling set_torch_mode() anymore due to this open() call.
+ * open() must not trigger TORCH_MODE_STATUS_AVAILABLE_OFF before
+ * TORCH_MODE_STATUS_NOT_AVAILABLE for all flash units that have become
+ * unavailable.
+ *
+ * 4. close() is called to close a camera device.
+ * The camera HAL module must invoke
+ * camera_module_callbacks::torch_mode_status_change() for all flash units
+ * that have entered TORCH_MODE_STATUS_AVAILABLE_OFF state and can be turned
+ * on by calling set_torch_mode() again because of enough resources freed
+ * up by this close() call.
+ *
+ * Note that the framework calling set_torch_mode() successfully must trigger
+ * TORCH_MODE_STATUS_AVAILABLE_OFF or TORCH_MODE_STATUS_AVAILABLE_ON callback
+ * for the given camera device. Additionally it must trigger
+ * TORCH_MODE_STATUS_AVAILABLE_OFF callbacks for other previously-on torch
+ * modes if HAL cannot keep multiple torch modes on simultaneously.
+ */
+typedef enum torch_mode_status {
+
+ /**
+ * The flash unit is no longer available and the torch mode can not be
+ * turned on by calling set_torch_mode(). If the torch mode is on, it
+ * will be turned off by HAL before HAL calls torch_mode_status_change().
+ */
+ TORCH_MODE_STATUS_NOT_AVAILABLE = 0,
+
+ /**
+ * A torch mode has become off and available to be turned on via
+ * set_torch_mode(). This may happen in the following
+ * cases:
+ * 1. After the resources to turn on the torch mode have become available.
+ * 2. After set_torch_mode() is called to turn off the torch mode.
+ * 3. After the framework turned on the torch mode of some other camera
+ * device and HAL had to turn off the torch modes of any camera devices
+ * that were previously on.
+ */
+ TORCH_MODE_STATUS_AVAILABLE_OFF = 1,
+
+ /**
+ * A torch mode has become on and available to be turned off via
+ * set_torch_mode(). This can happen only after set_torch_mode() is called
+ * to turn on the torch mode.
+ */
+ TORCH_MODE_STATUS_AVAILABLE_ON = 2,
+
+} torch_mode_status_t;
+
+/**
+ * Callback functions for the camera HAL module to use to inform the framework
+ * of changes to the camera subsystem.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * Each callback is called only by HAL modules implementing the indicated
+ * version or higher of the HAL module API interface.
+ *
+ * CAMERA_MODULE_API_VERSION_2_1:
+ * camera_device_status_change()
+ *
+ * CAMERA_MODULE_API_VERSION_2_4:
+ * torch_mode_status_change()
+
+ */
+typedef struct camera_module_callbacks {
+
+ /**
+ * camera_device_status_change:
+ *
+ * Callback to the framework to indicate that the state of a specific camera
+ * device has changed. At module load time, the framework will assume all
+ * camera devices are in the CAMERA_DEVICE_STATUS_PRESENT state. The HAL
+ * must call this method to inform the framework of any initially
+ * NOT_PRESENT devices.
+ *
+ * This callback is added for CAMERA_MODULE_API_VERSION_2_1.
+ *
+ * camera_module_callbacks: The instance of camera_module_callbacks_t passed
+ * to the module with set_callbacks.
+ *
+ * camera_id: The ID of the camera device that has a new status.
+ *
+ * new_status: The new status code, one of the camera_device_status_t enums,
+ * or a platform-specific status.
+ *
+ */
+ void (*camera_device_status_change)(const struct camera_module_callbacks*,
+ int camera_id,
+ int new_status);
+
+ /**
+ * torch_mode_status_change:
+ *
+ * Callback to the framework to indicate that the state of the torch mode
+ * of the flash unit associated with a specific camera device has changed.
+ * At module load time, the framework will assume the torch modes are in
+ * the TORCH_MODE_STATUS_AVAILABLE_OFF state if android.flash.info.available
+ * is reported as true via get_camera_info() call.
+ *
+ * This callback is added for CAMERA_MODULE_API_VERSION_2_4.
+ *
+ * camera_module_callbacks: The instance of camera_module_callbacks_t
+ * passed to the module with set_callbacks.
+ *
+ * camera_id: The ID of camera device whose flash unit has a new torch mode
+ * status.
+ *
+ * new_status: The new status code, one of the torch_mode_status_t enums.
+ */
+ void (*torch_mode_status_change)(const struct camera_module_callbacks*,
+ const char* camera_id,
+ int new_status);
+
+
+} camera_module_callbacks_t;
+
+typedef struct camera_module {
+ /**
+ * Common methods of the camera module. This *must* be the first member of
+ * camera_module as users of this structure will cast a hw_module_t to
+ * camera_module pointer in contexts where it's known the hw_module_t
+ * references a camera_module.
+ *
+ * The return values for common.methods->open for camera_module are:
+ *
+ * 0: On a successful open of the camera device.
+ *
+ * -ENODEV: The camera device cannot be opened due to an internal
+ * error.
+ *
+ * -EINVAL: The input arguments are invalid, i.e. the id is invalid,
+ * and/or the module is invalid.
+ *
+ * -EBUSY: The camera device was already opened for this camera id
+ * (by using this method or open_legacy),
+ * regardless of the device HAL version it was opened as.
+ *
+ * -EUSERS: The maximal number of camera devices that can be
+ * opened concurrently were opened already, either by
+ * this method or the open_legacy method.
+ *
+ * All other return values from common.methods->open will be treated as
+ * -ENODEV.
+ */
+ hw_module_t common;
+
+ /**
+ * get_number_of_cameras:
+ *
+ * Returns the number of camera devices accessible through the camera
+ * module. The camera devices are numbered 0 through N-1, where N is the
+ * value returned by this call. The name of the camera device for open() is
+ * simply the number converted to a string. That is, "0" for camera ID 0,
+ * "1" for camera ID 1.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_2_3 or lower:
+ *
+ * The value here must be static, and cannot change after the first call
+ * to this method.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4 or higher:
+ *
+ * The value here must be static, and must count only built-in cameras,
+ * which have CAMERA_FACING_BACK or CAMERA_FACING_FRONT camera facing values
+ * (camera_info.facing). The HAL must not include the external cameras
+ * (camera_info.facing == CAMERA_FACING_EXTERNAL) into the return value
+ * of this call. Frameworks will use camera_device_status_change callback
+ * to manage number of external cameras.
+ */
+ int (*get_number_of_cameras)(void);
+
+ /**
+ * get_camera_info:
+ *
+ * Return the static camera information for a given camera device. This
+ * information may not change for a camera device.
+ *
+ * Return values:
+ *
+ * 0: On a successful operation
+ *
+ * -ENODEV: The information cannot be provided due to an internal
+ * error.
+ *
+ * -EINVAL: The input arguments are invalid, i.e. the id is invalid,
+ * and/or the module is invalid.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_2_4 or higher:
+ *
+ * When a camera is disconnected, its camera id becomes invalid. Calling this
+ * this method with this invalid camera id will get -EINVAL and NULL camera
+ * static metadata (camera_info.static_camera_characteristics).
+ */
+ int (*get_camera_info)(int camera_id, struct camera_info *info);
+
+ /**
+ * set_callbacks:
+ *
+ * Provide callback function pointers to the HAL module to inform framework
+ * of asynchronous camera module events. The framework will call this
+ * function once after initial camera HAL module load, after the
+ * get_number_of_cameras() method is called for the first time, and before
+ * any other calls to the module.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_1_0, CAMERA_MODULE_API_VERSION_2_0:
+ *
+ * Not provided by HAL module. Framework may not call this function.
+ *
+ * CAMERA_MODULE_API_VERSION_2_1:
+ *
+ * Valid to be called by the framework.
+ *
+ * Return values:
+ *
+ * 0: On a successful operation
+ *
+ * -ENODEV: The operation cannot be completed due to an internal
+ * error.
+ *
+ * -EINVAL: The input arguments are invalid, i.e. the callbacks are
+ * null
+ */
+ int (*set_callbacks)(const camera_module_callbacks_t *callbacks);
+
+ /**
+ * get_vendor_tag_ops:
+ *
+ * Get methods to query for vendor extension metadata tag information. The
+ * HAL should fill in all the vendor tag operation methods, or leave ops
+ * unchanged if no vendor tags are defined.
+ *
+ * The vendor_tag_ops structure used here is defined in:
+ * system/media/camera/include/system/vendor_tags.h
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_1_x/2_0/2_1:
+ * Not provided by HAL module. Framework may not call this function.
+ *
+ * CAMERA_MODULE_API_VERSION_2_2:
+ * Valid to be called by the framework.
+ */
+ void (*get_vendor_tag_ops)(vendor_tag_ops_t* ops);
+
+ /**
+ * open_legacy:
+ *
+ * Open a specific legacy camera HAL device if multiple device HAL API
+ * versions are supported by this camera HAL module. For example, if the
+ * camera module supports both CAMERA_DEVICE_API_VERSION_1_0 and
+ * CAMERA_DEVICE_API_VERSION_3_2 device API for the same camera id,
+ * framework can call this function to open the camera device as
+ * CAMERA_DEVICE_API_VERSION_1_0 device.
+ *
+ * This is an optional method. A Camera HAL module does not need to support
+ * more than one device HAL version per device, and such modules may return
+ * -ENOSYS for all calls to this method. For all older HAL device API
+ * versions that are not supported, it may return -EOPNOTSUPP. When above
+ * cases occur, The normal open() method (common.methods->open) will be
+ * used by the framework instead.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_1_x/2_0/2_1/2_2:
+ * Not provided by HAL module. Framework will not call this function.
+ *
+ * CAMERA_MODULE_API_VERSION_2_3:
+ * Valid to be called by the framework.
+ *
+ * Return values:
+ *
+ * 0: On a successful open of the camera device.
+ *
+ * -ENOSYS This method is not supported.
+ *
+ * -EOPNOTSUPP: The requested HAL version is not supported by this method.
+ *
+ * -EINVAL: The input arguments are invalid, i.e. the id is invalid,
+ * and/or the module is invalid.
+ *
+ * -EBUSY: The camera device was already opened for this camera id
+ * (by using this method or common.methods->open method),
+ * regardless of the device HAL version it was opened as.
+ *
+ * -EUSERS: The maximal number of camera devices that can be
+ * opened concurrently were opened already, either by
+ * this method or common.methods->open method.
+ */
+ int (*open_legacy)(const struct hw_module_t* module, const char* id,
+ uint32_t halVersion, struct hw_device_t** device);
+
+ /**
+ * set_torch_mode:
+ *
+ * Turn on or off the torch mode of the flash unit associated with a given
+ * camera ID. If the operation is successful, HAL must notify the framework
+ * torch state by invoking
+ * camera_module_callbacks.torch_mode_status_change() with the new state.
+ *
+ * The camera device has a higher priority accessing the flash unit. When
+ * there are any resource conflicts, such as open() is called to open a
+ * camera device, HAL module must notify the framework through
+ * camera_module_callbacks.torch_mode_status_change() that the
+ * torch mode has been turned off and the torch mode state has become
+ * TORCH_MODE_STATUS_NOT_AVAILABLE. When resources to turn on torch mode
+ * become available again, HAL module must notify the framework through
+ * camera_module_callbacks.torch_mode_status_change() that the torch mode
+ * state has become TORCH_MODE_STATUS_AVAILABLE_OFF for set_torch_mode() to
+ * be called.
+ *
+ * When the framework calls set_torch_mode() to turn on the torch mode of a
+ * flash unit, if HAL cannot keep multiple torch modes on simultaneously,
+ * HAL should turn off the torch mode that was turned on by
+ * a previous set_torch_mode() call and notify the framework that the torch
+ * mode state of that flash unit has become TORCH_MODE_STATUS_AVAILABLE_OFF.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_1_x/2_0/2_1/2_2/2_3:
+ * Not provided by HAL module. Framework will not call this function.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4:
+ * Valid to be called by the framework.
+ *
+ * Return values:
+ *
+ * 0: On a successful operation.
+ *
+ * -ENOSYS: The camera device does not support this operation. It is
+ * returned if and only if android.flash.info.available is
+ * false.
+ *
+ * -EBUSY: The camera device is already in use.
+ *
+ * -EUSERS: The resources needed to turn on the torch mode are not
+ * available, typically because other camera devices are
+ * holding the resources to make using the flash unit not
+ * possible.
+ *
+ * -EINVAL: camera_id is invalid.
+ *
+ */
+ int (*set_torch_mode)(const char* camera_id, bool enabled);
+
+ /**
+ * init:
+ *
+ * This method is called by the camera service before any other methods
+ * are invoked, right after the camera HAL library has been successfully
+ * loaded. It may be left as NULL by the HAL module, if no initialization
+ * in needed.
+ *
+ * It can be used by HAL implementations to perform initialization and
+ * other one-time operations.
+ *
+ * Version information (based on camera_module_t.common.module_api_version):
+ *
+ * CAMERA_MODULE_API_VERSION_1_x/2_0/2_1/2_2/2_3:
+ * Not provided by HAL module. Framework will not call this function.
+ *
+ * CAMERA_MODULE_API_VERSION_2_4:
+ * If not NULL, will always be called by the framework once after the HAL
+ * module is loaded, before any other HAL module method is called.
+ *
+ * Return values:
+ *
+ * 0: On a successful operation.
+ *
+ * -ENODEV: Initialization cannot be completed due to an internal
+ * error. The HAL must be assumed to be in a nonfunctional
+ * state.
+ *
+ */
+ int (*init)();
+
+ /* reserved for future use */
+ void* reserved[5];
+} camera_module_t;
+
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_CAMERA_COMMON_H */
diff --git a/include/android/hardware/libhardware/include/hardware/fb.h b/include/android/hardware/libhardware/include/hardware/fb.h
new file mode 100644
index 00000000..9df94165
--- /dev/null
+++ b/include/android/hardware/libhardware/include/hardware/fb.h
@@ -0,0 +1,173 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#ifndef ANDROID_FB_INTERFACE_H
+#define ANDROID_FB_INTERFACE_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+#include <cutils/native_handle.h>
+
+#include <hardware/hardware.h>
+
+__BEGIN_DECLS
+
+#define GRALLOC_HARDWARE_FB0 "fb0"
+
+/*****************************************************************************/
+
+
+/*****************************************************************************/
+
+typedef struct framebuffer_device_t {
+ /**
+ * Common methods of the framebuffer device. This *must* be the first member of
+ * framebuffer_device_t as users of this structure will cast a hw_device_t to
+ * framebuffer_device_t pointer in contexts where it's known the hw_device_t references a
+ * framebuffer_device_t.
+ */
+ struct hw_device_t common;
+
+ /* flags describing some attributes of the framebuffer */
+ const uint32_t flags;
+
+ /* dimensions of the framebuffer in pixels */
+ const uint32_t width;
+ const uint32_t height;
+
+ /* frambuffer stride in pixels */
+ const int stride;
+
+ /* framebuffer pixel format */
+ const int format;
+
+ /* resolution of the framebuffer's display panel in pixel per inch*/
+ const float xdpi;
+ const float ydpi;
+
+ /* framebuffer's display panel refresh rate in frames per second */
+ const float fps;
+
+ /* min swap interval supported by this framebuffer */
+ const int minSwapInterval;
+
+ /* max swap interval supported by this framebuffer */
+ const int maxSwapInterval;
+
+ /* Number of framebuffers supported*/
+ const int numFramebuffers;
+
+ int reserved[7];
+
+ /*
+ * requests a specific swap-interval (same definition than EGL)
+ *
+ * Returns 0 on success or -errno on error.
+ */
+ int (*setSwapInterval)(struct framebuffer_device_t* window,
+ int interval);
+
+ /*
+ * This hook is OPTIONAL.
+ *
+ * It is non NULL If the framebuffer driver supports "update-on-demand"
+ * and the given rectangle is the area of the screen that gets
+ * updated during (*post)().
+ *
+ * This is useful on devices that are able to DMA only a portion of
+ * the screen to the display panel, upon demand -- as opposed to
+ * constantly refreshing the panel 60 times per second, for instance.
+ *
+ * Only the area defined by this rectangle is guaranteed to be valid, that
+ * is, the driver is not allowed to post anything outside of this
+ * rectangle.
+ *
+ * The rectangle evaluated during (*post)() and specifies which area
+ * of the buffer passed in (*post)() shall to be posted.
+ *
+ * return -EINVAL if width or height <=0, or if left or top < 0
+ */
+ int (*setUpdateRect)(struct framebuffer_device_t* window,
+ int left, int top, int width, int height);
+
+ /*
+ * Post <buffer> to the display (display it on the screen)
+ * The buffer must have been allocated with the
+ * GRALLOC_USAGE_HW_FB usage flag.
+ * buffer must be the same width and height as the display and must NOT
+ * be locked.
+ *
+ * The buffer is shown during the next VSYNC.
+ *
+ * If the same buffer is posted again (possibly after some other buffer),
+ * post() will block until the the first post is completed.
+ *
+ * Internally, post() is expected to lock the buffer so that a
+ * subsequent call to gralloc_module_t::(*lock)() with USAGE_RENDER or
+ * USAGE_*_WRITE will block until it is safe; that is typically once this
+ * buffer is shown and another buffer has been posted.
+ *
+ * Returns 0 on success or -errno on error.
+ */
+ int (*post)(struct framebuffer_device_t* dev, buffer_handle_t buffer);
+
+
+ /*
+ * The (*compositionComplete)() method must be called after the
+ * compositor has finished issuing GL commands for client buffers.
+ */
+
+ int (*compositionComplete)(struct framebuffer_device_t* dev);
+
+ /*
+ * This hook is OPTIONAL.
+ *
+ * If non NULL it will be caused by SurfaceFlinger on dumpsys
+ */
+ void (*dump)(struct framebuffer_device_t* dev, char *buff, int buff_len);
+
+ /*
+ * (*enableScreen)() is used to either blank (enable=0) or
+ * unblank (enable=1) the screen this framebuffer is attached to.
+ *
+ * Returns 0 on success or -errno on error.
+ */
+ int (*enableScreen)(struct framebuffer_device_t* dev, int enable);
+
+ void* reserved_proc[6];
+
+} framebuffer_device_t;
+
+
+/** convenience API for opening and closing a supported device */
+
+static inline int framebuffer_open(const struct hw_module_t* module,
+ struct framebuffer_device_t** device) {
+ return module->methods->open(module,
+ GRALLOC_HARDWARE_FB0, (struct hw_device_t**)device);
+}
+
+static inline int framebuffer_close(struct framebuffer_device_t* device) {
+ return device->common.close(&device->common);
+}
+
+
+__END_DECLS
+
+#endif // ANDROID_FB_INTERFACE_H
diff --git a/include/android/hardware/libhardware/include/hardware/gralloc.h b/include/android/hardware/libhardware/include/hardware/gralloc.h
new file mode 100644
index 00000000..ef86f903
--- /dev/null
+++ b/include/android/hardware/libhardware/include/hardware/gralloc.h
@@ -0,0 +1,384 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#ifndef ANDROID_GRALLOC_INTERFACE_H
+#define ANDROID_GRALLOC_INTERFACE_H
+
+#include <system/window.h>
+#include <system/graphics.h>
+#include <hardware/hardware.h>
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+#include <cutils/native_handle.h>
+
+#include <hardware/hardware.h>
+#include <hardware/fb.h>
+
+__BEGIN_DECLS
+
+/**
+ * Module versioning information for the Gralloc hardware module, based on
+ * gralloc_module_t.common.module_api_version.
+ *
+ * Version History:
+ *
+ * GRALLOC_MODULE_API_VERSION_0_1:
+ * Initial Gralloc hardware module API.
+ *
+ * GRALLOC_MODULE_API_VERSION_0_2:
+ * Add support for flexible YCbCr format with (*lock_ycbcr)() method.
+ *
+ * GRALLOC_MODULE_API_VERSION_0_3:
+ * Add support for fence passing to/from lock/unlock.
+ */
+
+#define GRALLOC_MODULE_API_VERSION_0_1 HARDWARE_MODULE_API_VERSION(0, 1)
+#define GRALLOC_MODULE_API_VERSION_0_2 HARDWARE_MODULE_API_VERSION(0, 2)
+#define GRALLOC_MODULE_API_VERSION_0_3 HARDWARE_MODULE_API_VERSION(0, 3)
+
+#define GRALLOC_DEVICE_API_VERSION_0_1 HARDWARE_DEVICE_API_VERSION(0, 1)
+
+/**
+ * The id of this module
+ */
+#define GRALLOC_HARDWARE_MODULE_ID "gralloc"
+
+/**
+ * Name of the graphics device to open
+ */
+
+#define GRALLOC_HARDWARE_GPU0 "gpu0"
+
+enum {
+ /* buffer is never read in software */
+ GRALLOC_USAGE_SW_READ_NEVER = 0x00000000,
+ /* buffer is rarely read in software */
+ GRALLOC_USAGE_SW_READ_RARELY = 0x00000002,
+ /* buffer is often read in software */
+ GRALLOC_USAGE_SW_READ_OFTEN = 0x00000003,
+ /* mask for the software read values */
+ GRALLOC_USAGE_SW_READ_MASK = 0x0000000F,
+
+ /* buffer is never written in software */
+ GRALLOC_USAGE_SW_WRITE_NEVER = 0x00000000,
+ /* buffer is rarely written in software */
+ GRALLOC_USAGE_SW_WRITE_RARELY = 0x00000020,
+ /* buffer is often written in software */
+ GRALLOC_USAGE_SW_WRITE_OFTEN = 0x00000030,
+ /* mask for the software write values */
+ GRALLOC_USAGE_SW_WRITE_MASK = 0x000000F0,
+
+ /* buffer will be used as an OpenGL ES texture */
+ GRALLOC_USAGE_HW_TEXTURE = 0x00000100,
+ /* buffer will be used as an OpenGL ES render target */
+ GRALLOC_USAGE_HW_RENDER = 0x00000200,
+ /* buffer will be used by the 2D hardware blitter */
+ GRALLOC_USAGE_HW_2D = 0x00000400,
+ /* buffer will be used by the HWComposer HAL module */
+ GRALLOC_USAGE_HW_COMPOSER = 0x00000800,
+ /* buffer will be used with the framebuffer device */
+ GRALLOC_USAGE_HW_FB = 0x00001000,
+
+ /* buffer should be displayed full-screen on an external display when
+ * possible */
+ GRALLOC_USAGE_EXTERNAL_DISP = 0x00002000,
+
+ /* Must have a hardware-protected path to external display sink for
+ * this buffer. If a hardware-protected path is not available, then
+ * either don't composite only this buffer (preferred) to the
+ * external sink, or (less desirable) do not route the entire
+ * composition to the external sink. */
+ GRALLOC_USAGE_PROTECTED = 0x00004000,
+
+ /* buffer may be used as a cursor */
+ GRALLOC_USAGE_CURSOR = 0x00008000,
+
+ /* buffer will be used with the HW video encoder */
+ GRALLOC_USAGE_HW_VIDEO_ENCODER = 0x00010000,
+ /* buffer will be written by the HW camera pipeline */
+ GRALLOC_USAGE_HW_CAMERA_WRITE = 0x00020000,
+ /* buffer will be read by the HW camera pipeline */
+ GRALLOC_USAGE_HW_CAMERA_READ = 0x00040000,
+ /* buffer will be used as part of zero-shutter-lag queue */
+ GRALLOC_USAGE_HW_CAMERA_ZSL = 0x00060000,
+ /* mask for the camera access values */
+ GRALLOC_USAGE_HW_CAMERA_MASK = 0x00060000,
+ /* mask for the software usage bit-mask */
+ GRALLOC_USAGE_HW_MASK = 0x00071F00,
+
+ /* buffer will be used as a RenderScript Allocation */
+ GRALLOC_USAGE_RENDERSCRIPT = 0x00100000,
+
+ /* Set by the consumer to indicate to the producer that they may attach a
+ * buffer that they did not detach from the BufferQueue. Will be filtered
+ * out by GRALLOC_USAGE_ALLOC_MASK, so gralloc modules will not need to
+ * handle this flag. */
+ GRALLOC_USAGE_FOREIGN_BUFFERS = 0x00200000,
+
+ /* Mask of all flags which could be passed to a gralloc module for buffer
+ * allocation. Any flags not in this mask do not need to be handled by
+ * gralloc modules. */
+ GRALLOC_USAGE_ALLOC_MASK = ~(GRALLOC_USAGE_FOREIGN_BUFFERS),
+
+ /* implementation-specific private usage flags */
+ GRALLOC_USAGE_PRIVATE_0 = 0x10000000,
+ GRALLOC_USAGE_PRIVATE_1 = 0x20000000,
+ GRALLOC_USAGE_PRIVATE_2 = 0x40000000,
+ GRALLOC_USAGE_PRIVATE_3 = 0x80000000,
+ GRALLOC_USAGE_PRIVATE_MASK = 0xF0000000,
+};
+
+/*****************************************************************************/
+
+/**
+ * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
+ * and the fields of this data structure must begin with hw_module_t
+ * followed by module specific information.
+ */
+typedef struct gralloc_module_t {
+ struct hw_module_t common;
+
+ /*
+ * (*registerBuffer)() must be called before a buffer_handle_t that has not
+ * been created with (*alloc_device_t::alloc)() can be used.
+ *
+ * This is intended to be used with buffer_handle_t's that have been
+ * received in this process through IPC.
+ *
+ * This function checks that the handle is indeed a valid one and prepares
+ * it for use with (*lock)() and (*unlock)().
+ *
+ * It is not necessary to call (*registerBuffer)() on a handle created
+ * with (*alloc_device_t::alloc)().
+ *
+ * returns an error if this buffer_handle_t is not valid.
+ */
+ int (*registerBuffer)(struct gralloc_module_t const* module,
+ buffer_handle_t handle);
+
+ /*
+ * (*unregisterBuffer)() is called once this handle is no longer needed in
+ * this process. After this call, it is an error to call (*lock)(),
+ * (*unlock)(), or (*registerBuffer)().
+ *
+ * This function doesn't close or free the handle itself; this is done
+ * by other means, usually through libcutils's native_handle_close() and
+ * native_handle_free().
+ *
+ * It is an error to call (*unregisterBuffer)() on a buffer that wasn't
+ * explicitly registered first.
+ */
+ int (*unregisterBuffer)(struct gralloc_module_t const* module,
+ buffer_handle_t handle);
+
+ /*
+ * The (*lock)() method is called before a buffer is accessed for the
+ * specified usage. This call may block, for instance if the h/w needs
+ * to finish rendering or if CPU caches need to be synchronized.
+ *
+ * The caller promises to modify only pixels in the area specified
+ * by (l,t,w,h).
+ *
+ * The content of the buffer outside of the specified area is NOT modified
+ * by this call.
+ *
+ * If usage specifies GRALLOC_USAGE_SW_*, vaddr is filled with the address
+ * of the buffer in virtual memory.
+ *
+ * Note calling (*lock)() on HAL_PIXEL_FORMAT_YCbCr_*_888 buffers will fail
+ * and return -EINVAL. These buffers must be locked with (*lock_ycbcr)()
+ * instead.
+ *
+ * THREADING CONSIDERATIONS:
+ *
+ * It is legal for several different threads to lock a buffer from
+ * read access, none of the threads are blocked.
+ *
+ * However, locking a buffer simultaneously for write or read/write is
+ * undefined, but:
+ * - shall not result in termination of the process
+ * - shall not block the caller
+ * It is acceptable to return an error or to leave the buffer's content
+ * into an indeterminate state.
+ *
+ * If the buffer was created with a usage mask incompatible with the
+ * requested usage flags here, -EINVAL is returned.
+ *
+ */
+
+ int (*lock)(struct gralloc_module_t const* module,
+ buffer_handle_t handle, int usage,
+ int l, int t, int w, int h,
+ void** vaddr);
+
+
+ /*
+ * The (*unlock)() method must be called after all changes to the buffer
+ * are completed.
+ */
+
+ int (*unlock)(struct gralloc_module_t const* module,
+ buffer_handle_t handle);
+
+
+ /* reserved for future use */
+ int (*perform)(struct gralloc_module_t const* module,
+ int operation, ... );
+
+ /*
+ * The (*lock_ycbcr)() method is like the (*lock)() method, with the
+ * difference that it fills a struct ycbcr with a description of the buffer
+ * layout, and zeroes out the reserved fields.
+ *
+ * If the buffer format is not compatible with a flexible YUV format (e.g.
+ * the buffer layout cannot be represented with the ycbcr struct), it
+ * will return -EINVAL.
+ *
+ * This method must work on buffers with HAL_PIXEL_FORMAT_YCbCr_*_888
+ * if supported by the device, as well as with any other format that is
+ * requested by the multimedia codecs when they are configured with a
+ * flexible-YUV-compatible color-format with android native buffers.
+ *
+ * Note that this method may also be called on buffers of other formats,
+ * including non-YUV formats.
+ *
+ * Added in GRALLOC_MODULE_API_VERSION_0_2.
+ */
+
+ int (*lock_ycbcr)(struct gralloc_module_t const* module,
+ buffer_handle_t handle, int usage,
+ int l, int t, int w, int h,
+ struct android_ycbcr *ycbcr);
+
+ /*
+ * The (*lockAsync)() method is like the (*lock)() method except
+ * that the buffer's sync fence object is passed into the lock
+ * call instead of requiring the caller to wait for completion.
+ *
+ * The gralloc implementation takes ownership of the fenceFd and
+ * is responsible for closing it when no longer needed.
+ *
+ * Added in GRALLOC_MODULE_API_VERSION_0_3.
+ */
+ int (*lockAsync)(struct gralloc_module_t const* module,
+ buffer_handle_t handle, int usage,
+ int l, int t, int w, int h,
+ void** vaddr, int fenceFd);
+
+ /*
+ * The (*unlockAsync)() method is like the (*unlock)() method
+ * except that a buffer sync fence object is returned from the
+ * lock call, representing the completion of any pending work
+ * performed by the gralloc implementation.
+ *
+ * The caller takes ownership of the fenceFd and is responsible
+ * for closing it when no longer needed.
+ *
+ * Added in GRALLOC_MODULE_API_VERSION_0_3.
+ */
+ int (*unlockAsync)(struct gralloc_module_t const* module,
+ buffer_handle_t handle, int* fenceFd);
+
+ /*
+ * The (*lockAsync_ycbcr)() method is like the (*lock_ycbcr)()
+ * method except that the buffer's sync fence object is passed
+ * into the lock call instead of requiring the caller to wait for
+ * completion.
+ *
+ * The gralloc implementation takes ownership of the fenceFd and
+ * is responsible for closing it when no longer needed.
+ *
+ * Added in GRALLOC_MODULE_API_VERSION_0_3.
+ */
+ int (*lockAsync_ycbcr)(struct gralloc_module_t const* module,
+ buffer_handle_t handle, int usage,
+ int l, int t, int w, int h,
+ struct android_ycbcr *ycbcr, int fenceFd);
+
+ /* reserved for future use */
+ void* reserved_proc[3];
+} gralloc_module_t;
+
+/*****************************************************************************/
+
+/**
+ * Every device data structure must begin with hw_device_t
+ * followed by module specific public methods and attributes.
+ */
+
+typedef struct alloc_device_t {
+ struct hw_device_t common;
+
+ /*
+ * (*alloc)() Allocates a buffer in graphic memory with the requested
+ * parameters and returns a buffer_handle_t and the stride in pixels to
+ * allow the implementation to satisfy hardware constraints on the width
+ * of a pixmap (eg: it may have to be multiple of 8 pixels).
+ * The CALLER TAKES OWNERSHIP of the buffer_handle_t.
+ *
+ * If format is HAL_PIXEL_FORMAT_YCbCr_420_888, the returned stride must be
+ * 0, since the actual strides are available from the android_ycbcr
+ * structure.
+ *
+ * Returns 0 on success or -errno on error.
+ */
+
+ int (*alloc)(struct alloc_device_t* dev,
+ int w, int h, int format, int usage,
+ buffer_handle_t* handle, int* stride);
+
+ /*
+ * (*free)() Frees a previously allocated buffer.
+ * Behavior is undefined if the buffer is still mapped in any process,
+ * but shall not result in termination of the program or security breaches
+ * (allowing a process to get access to another process' buffers).
+ * THIS FUNCTION TAKES OWNERSHIP of the buffer_handle_t which becomes
+ * invalid after the call.
+ *
+ * Returns 0 on success or -errno on error.
+ */
+ int (*free)(struct alloc_device_t* dev,
+ buffer_handle_t handle);
+
+ /* This hook is OPTIONAL.
+ *
+ * If non NULL it will be caused by SurfaceFlinger on dumpsys
+ */
+ void (*dump)(struct alloc_device_t *dev, char *buff, int buff_len);
+
+ void* reserved_proc[7];
+} alloc_device_t;
+
+
+/** convenience API for opening and closing a supported device */
+
+static inline int gralloc_open(const struct hw_module_t* module,
+ struct alloc_device_t** device) {
+ return module->methods->open(module,
+ GRALLOC_HARDWARE_GPU0, (struct hw_device_t**)device);
+}
+
+static inline int gralloc_close(struct alloc_device_t* device) {
+ return device->common.close(&device->common);
+}
+
+__END_DECLS
+
+#endif // ANDROID_GRALLOC_INTERFACE_H
diff --git a/include/android/hardware/libhardware/include/hardware/hardware.h b/include/android/hardware/libhardware/include/hardware/hardware.h
new file mode 100644
index 00000000..74f57aa4
--- /dev/null
+++ b/include/android/hardware/libhardware/include/hardware/hardware.h
@@ -0,0 +1,238 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_HARDWARE_HARDWARE_H
+#define ANDROID_INCLUDE_HARDWARE_HARDWARE_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+
+#include <cutils/native_handle.h>
+#include <system/graphics.h>
+
+__BEGIN_DECLS
+
+/*
+ * Value for the hw_module_t.tag field
+ */
+
+#define MAKE_TAG_CONSTANT(A,B,C,D) (((A) << 24) | ((B) << 16) | ((C) << 8) | (D))
+
+#define HARDWARE_MODULE_TAG MAKE_TAG_CONSTANT('H', 'W', 'M', 'T')
+#define HARDWARE_DEVICE_TAG MAKE_TAG_CONSTANT('H', 'W', 'D', 'T')
+
+#define HARDWARE_MAKE_API_VERSION(maj,min) \
+ ((((maj) & 0xff) << 8) | ((min) & 0xff))
+
+#define HARDWARE_MAKE_API_VERSION_2(maj,min,hdr) \
+ ((((maj) & 0xff) << 24) | (((min) & 0xff) << 16) | ((hdr) & 0xffff))
+#define HARDWARE_API_VERSION_2_MAJ_MIN_MASK 0xffff0000
+#define HARDWARE_API_VERSION_2_HEADER_MASK 0x0000ffff
+
+
+/*
+ * The current HAL API version.
+ *
+ * All module implementations must set the hw_module_t.hal_api_version field
+ * to this value when declaring the module with HAL_MODULE_INFO_SYM.
+ *
+ * Note that previous implementations have always set this field to 0.
+ * Therefore, libhardware HAL API will always consider versions 0.0 and 1.0
+ * to be 100% binary compatible.
+ *
+ */
+#define HARDWARE_HAL_API_VERSION HARDWARE_MAKE_API_VERSION(1, 0)
+
+/*
+ * Helper macros for module implementors.
+ *
+ * The derived modules should provide convenience macros for supported
+ * versions so that implementations can explicitly specify module/device
+ * versions at definition time.
+ *
+ * Use this macro to set the hw_module_t.module_api_version field.
+ */
+#define HARDWARE_MODULE_API_VERSION(maj,min) HARDWARE_MAKE_API_VERSION(maj,min)
+#define HARDWARE_MODULE_API_VERSION_2(maj,min,hdr) HARDWARE_MAKE_API_VERSION_2(maj,min,hdr)
+
+/*
+ * Use this macro to set the hw_device_t.version field
+ */
+#define HARDWARE_DEVICE_API_VERSION(maj,min) HARDWARE_MAKE_API_VERSION(maj,min)
+#define HARDWARE_DEVICE_API_VERSION_2(maj,min,hdr) HARDWARE_MAKE_API_VERSION_2(maj,min,hdr)
+
+struct hw_module_t;
+struct hw_module_methods_t;
+struct hw_device_t;
+
+/**
+ * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
+ * and the fields of this data structure must begin with hw_module_t
+ * followed by module specific information.
+ */
+typedef struct hw_module_t {
+ /** tag must be initialized to HARDWARE_MODULE_TAG */
+ uint32_t tag;
+
+ /**
+ * The API version of the implemented module. The module owner is
+ * responsible for updating the version when a module interface has
+ * changed.
+ *
+ * The derived modules such as gralloc and audio own and manage this field.
+ * The module user must interpret the version field to decide whether or
+ * not to inter-operate with the supplied module implementation.
+ * For example, SurfaceFlinger is responsible for making sure that
+ * it knows how to manage different versions of the gralloc-module API,
+ * and AudioFlinger must know how to do the same for audio-module API.
+ *
+ * The module API version should include a major and a minor component.
+ * For example, version 1.0 could be represented as 0x0100. This format
+ * implies that versions 0x0100-0x01ff are all API-compatible.
+ *
+ * In the future, libhardware will expose a hw_get_module_version()
+ * (or equivalent) function that will take minimum/maximum supported
+ * versions as arguments and would be able to reject modules with
+ * versions outside of the supplied range.
+ */
+ uint16_t module_api_version;
+#define version_major module_api_version
+ /**
+ * version_major/version_minor defines are supplied here for temporary
+ * source code compatibility. They will be removed in the next version.
+ * ALL clients must convert to the new version format.
+ */
+
+ /**
+ * The API version of the HAL module interface. This is meant to
+ * version the hw_module_t, hw_module_methods_t, and hw_device_t
+ * structures and definitions.
+ *
+ * The HAL interface owns this field. Module users/implementations
+ * must NOT rely on this value for version information.
+ *
+ * Presently, 0 is the only valid value.
+ */
+ uint16_t hal_api_version;
+#define version_minor hal_api_version
+
+ /** Identifier of module */
+ const char *id;
+
+ /** Name of this module */
+ const char *name;
+
+ /** Author/owner/implementor of the module */
+ const char *author;
+
+ /** Modules methods */
+ struct hw_module_methods_t* methods;
+
+ /** module's dso */
+ void* dso;
+
+#ifdef __LP64__
+ uint64_t reserved[32-7];
+#else
+ /** padding to 128 bytes, reserved for future use */
+ uint32_t reserved[32-7];
+#endif
+
+} hw_module_t;
+
+typedef struct hw_module_methods_t {
+ /** Open a specific device */
+ int (*open)(const struct hw_module_t* module, const char* id,
+ struct hw_device_t** device);
+
+} hw_module_methods_t;
+
+/**
+ * Every device data structure must begin with hw_device_t
+ * followed by module specific public methods and attributes.
+ */
+typedef struct hw_device_t {
+ /** tag must be initialized to HARDWARE_DEVICE_TAG */
+ uint32_t tag;
+
+ /**
+ * Version of the module-specific device API. This value is used by
+ * the derived-module user to manage different device implementations.
+ *
+ * The module user is responsible for checking the module_api_version
+ * and device version fields to ensure that the user is capable of
+ * communicating with the specific module implementation.
+ *
+ * One module can support multiple devices with different versions. This
+ * can be useful when a device interface changes in an incompatible way
+ * but it is still necessary to support older implementations at the same
+ * time. One such example is the Camera 2.0 API.
+ *
+ * This field is interpreted by the module user and is ignored by the
+ * HAL interface itself.
+ */
+ uint32_t version;
+
+ /** reference to the module this device belongs to */
+ struct hw_module_t* module;
+
+ /** padding reserved for future use */
+#ifdef __LP64__
+ uint64_t reserved[12];
+#else
+ uint32_t reserved[12];
+#endif
+
+ /** Close this device */
+ int (*close)(struct hw_device_t* device);
+
+} hw_device_t;
+
+/**
+ * Name of the hal_module_info
+ */
+#define HAL_MODULE_INFO_SYM HMI
+
+/**
+ * Name of the hal_module_info as a string
+ */
+#define HAL_MODULE_INFO_SYM_AS_STR "HMI"
+
+/**
+ * Get the module info associated with a module by id.
+ *
+ * @return: 0 == success, <0 == error and *module == NULL
+ */
+int hw_get_module(const char *id, const struct hw_module_t **module);
+
+/**
+ * Get the module info associated with a module instance by class 'class_id'
+ * and instance 'inst'.
+ *
+ * Some modules types necessitate multiple instances. For example audio supports
+ * multiple concurrent interfaces and thus 'audio' is the module class
+ * and 'primary' or 'a2dp' are module interfaces. This implies that the files
+ * providing these modules would be named audio.primary.<variant>.so and
+ * audio.a2dp.<variant>.so
+ *
+ * @return: 0 == success, <0 == error and *module == NULL
+ */
+int hw_get_module_by_class(const char *class_id, const char *inst,
+ const struct hw_module_t **module);
+
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_HARDWARE_HARDWARE_H */