From 206a22a6e927d6d78d0c34a0f6267be4e19396b7 Mon Sep 17 00:00:00 2001 From: Jacopo Mondi Date: Fri, 10 May 2019 17:12:45 +0200 Subject: include: android: Add Android headers from Cros Copy the Android Camera3 HAL headers from the ChromiumOS build system and define a new inclusion directive in the meson build system for them. The header files have been copied from: https://chromium.googlesource.com/chromiumos/platform2 at revision 9e65ddd2c496e712f005ada9715decd2ff8e4a03 and provide: 1) Android CameraHAL3 HAL headers in include/android/hardware/ 2) The Android system headers in include/android/system/ 3) The Android camera metadata headers in include/android/metadata/ The original path in the Cros platform2/ repository is, respectively: camera/android/header_files/include/hardware camera/android/header_files/include/system camera/android/libcamera_metadata/include/ Signed-off-by: Jacopo Mondi Reviewed-by: Laurent Pinchart --- .../libhardware/include/hardware/camera3.h | 3093 ++++++++++++++++++++ .../libhardware/include/hardware/camera_common.h | 916 ++++++ .../hardware/libhardware/include/hardware/fb.h | 173 ++ .../libhardware/include/hardware/gralloc.h | 384 +++ .../libhardware/include/hardware/hardware.h | 238 ++ 5 files changed, 4804 insertions(+) create mode 100644 include/android/hardware/libhardware/include/hardware/camera3.h create mode 100644 include/android/hardware/libhardware/include/hardware/camera_common.h create mode 100644 include/android/hardware/libhardware/include/hardware/fb.h create mode 100644 include/android/hardware/libhardware/include/hardware/gralloc.h create mode 100644 include/android/hardware/libhardware/include/hardware/hardware.h (limited to 'include/android/hardware') diff --git a/include/android/hardware/libhardware/include/hardware/camera3.h b/include/android/hardware/libhardware/include/hardware/camera3.h new file mode 100644 index 00000000..49664dc3 --- /dev/null +++ b/include/android/hardware/libhardware/include/hardware/camera3.h @@ -0,0 +1,3093 @@ +/* + * Copyright (C) 2013 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef ANDROID_INCLUDE_CAMERA3_H +#define ANDROID_INCLUDE_CAMERA3_H + +#include +#include "camera_common.h" + +/** + * Camera device HAL 3.3 [ CAMERA_DEVICE_API_VERSION_3_3 ] + * + * This is the current recommended version of the camera device HAL. + * + * Supports the android.hardware.Camera API, and as of v3.2, the + * android.hardware.camera2 API in LIMITED or FULL modes. + * + * Camera devices that support this version of the HAL must return + * CAMERA_DEVICE_API_VERSION_3_3 in camera_device_t.common.version and in + * camera_info_t.device_version (from camera_module_t.get_camera_info). + * + * CAMERA_DEVICE_API_VERSION_3_3: + * Camera modules that may contain version 3.3 devices must implement at + * least version 2.2 of the camera module interface (as defined by + * camera_module_t.common.module_api_version). + * + * CAMERA_DEVICE_API_VERSION_3_2: + * Camera modules that may contain version 3.2 devices must implement at + * least version 2.2 of the camera module interface (as defined by + * camera_module_t.common.module_api_version). + * + * <= CAMERA_DEVICE_API_VERSION_3_1: + * Camera modules that may contain version 3.1 (or 3.0) devices must + * implement at least version 2.0 of the camera module interface + * (as defined by camera_module_t.common.module_api_version). + * + * See camera_common.h for more versioning details. + * + * Documentation index: + * S1. Version history + * S2. Startup and operation sequencing + * S3. Operational modes + * S4. 3A modes and state machines + * S5. Cropping + * S6. Error management + * S7. Key Performance Indicator (KPI) glossary + * S8. Sample Use Cases + * S9. Notes on Controls and Metadata + * S10. Reprocessing flow and controls + */ + +/** + * S1. Version history: + * + * 1.0: Initial Android camera HAL (Android 4.0) [camera.h]: + * + * - Converted from C++ CameraHardwareInterface abstraction layer. + * + * - Supports android.hardware.Camera API. + * + * 2.0: Initial release of expanded-capability HAL (Android 4.2) [camera2.h]: + * + * - Sufficient for implementing existing android.hardware.Camera API. + * + * - Allows for ZSL queue in camera service layer + * + * - Not tested for any new features such manual capture control, Bayer RAW + * capture, reprocessing of RAW data. + * + * 3.0: First revision of expanded-capability HAL: + * + * - Major version change since the ABI is completely different. No change to + * the required hardware capabilities or operational model from 2.0. + * + * - Reworked input request and stream queue interfaces: Framework calls into + * HAL with next request and stream buffers already dequeued. Sync framework + * support is included, necessary for efficient implementations. + * + * - Moved triggers into requests, most notifications into results. + * + * - Consolidated all callbacks into framework into one structure, and all + * setup methods into a single initialize() call. + * + * - Made stream configuration into a single call to simplify stream + * management. Bidirectional streams replace STREAM_FROM_STREAM construct. + * + * - Limited mode semantics for older/limited hardware devices. + * + * 3.1: Minor revision of expanded-capability HAL: + * + * - configure_streams passes consumer usage flags to the HAL. + * + * - flush call to drop all in-flight requests/buffers as fast as possible. + * + * 3.2: Minor revision of expanded-capability HAL: + * + * - Deprecates get_metadata_vendor_tag_ops. Please use get_vendor_tag_ops + * in camera_common.h instead. + * + * - register_stream_buffers deprecated. All gralloc buffers provided + * by framework to HAL in process_capture_request may be new at any time. + * + * - add partial result support. process_capture_result may be called + * multiple times with a subset of the available result before the full + * result is available. + * + * - add manual template to camera3_request_template. The applications may + * use this template to control the capture settings directly. + * + * - Rework the bidirectional and input stream specifications. + * + * - change the input buffer return path. The buffer is returned in + * process_capture_result instead of process_capture_request. + * + * 3.3: Minor revision of expanded-capability HAL: + * + * - OPAQUE and YUV reprocessing API updates. + * + * - Basic support for depth output buffers. + * + * - Addition of data_space field to camera3_stream_t. + * + * - Addition of rotation field to camera3_stream_t. + * + * - Addition of camera3 stream configuration operation mode to camera3_stream_configuration_t + * + */ + +/** + * S2. Startup and general expected operation sequence: + * + * 1. Framework calls camera_module_t->common.open(), which returns a + * hardware_device_t structure. + * + * 2. Framework inspects the hardware_device_t->version field, and instantiates + * the appropriate handler for that version of the camera hardware device. In + * case the version is CAMERA_DEVICE_API_VERSION_3_0, the device is cast to + * a camera3_device_t. + * + * 3. Framework calls camera3_device_t->ops->initialize() with the framework + * callback function pointers. This will only be called this one time after + * open(), before any other functions in the ops structure are called. + * + * 4. The framework calls camera3_device_t->ops->configure_streams() with a list + * of input/output streams to the HAL device. + * + * 5. <= CAMERA_DEVICE_API_VERSION_3_1: + * + * The framework allocates gralloc buffers and calls + * camera3_device_t->ops->register_stream_buffers() for at least one of the + * output streams listed in configure_streams. The same stream is registered + * only once. + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * camera3_device_t->ops->register_stream_buffers() is not called and must + * be NULL. + * + * 6. The framework requests default settings for some number of use cases with + * calls to camera3_device_t->ops->construct_default_request_settings(). This + * may occur any time after step 3. + * + * 7. The framework constructs and sends the first capture request to the HAL, + * with settings based on one of the sets of default settings, and with at + * least one output stream, which has been registered earlier by the + * framework. This is sent to the HAL with + * camera3_device_t->ops->process_capture_request(). The HAL must block the + * return of this call until it is ready for the next request to be sent. + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * The buffer_handle_t provided in the camera3_stream_buffer_t array + * in the camera3_capture_request_t may be new and never-before-seen + * by the HAL on any given new request. + * + * 8. The framework continues to submit requests, and call + * construct_default_request_settings to get default settings buffers for + * other use cases. + * + * <= CAMERA_DEVICE_API_VERSION_3_1: + * + * The framework may call register_stream_buffers() at this time for + * not-yet-registered streams. + * + * 9. When the capture of a request begins (sensor starts exposing for the + * capture) or processing a reprocess request begins, the HAL + * calls camera3_callback_ops_t->notify() with the SHUTTER event, including + * the frame number and the timestamp for start of exposure. For a reprocess + * request, the timestamp must be the start of exposure of the input image + * which can be looked up with android.sensor.timestamp from + * camera3_capture_request_t.settings when process_capture_request() is + * called. + * + * <= CAMERA_DEVICE_API_VERSION_3_1: + * + * This notify call must be made before the first call to + * process_capture_result() for that frame number. + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * The camera3_callback_ops_t->notify() call with the SHUTTER event should + * be made as early as possible since the framework will be unable to + * deliver gralloc buffers to the application layer (for that frame) until + * it has a valid timestamp for the start of exposure (or the input image's + * start of exposure for a reprocess request). + * + * Both partial metadata results and the gralloc buffers may be sent to the + * framework at any time before or after the SHUTTER event. + * + * 10. After some pipeline delay, the HAL begins to return completed captures to + * the framework with camera3_callback_ops_t->process_capture_result(). These + * are returned in the same order as the requests were submitted. Multiple + * requests can be in flight at once, depending on the pipeline depth of the + * camera HAL device. + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * Once a buffer is returned by process_capture_result as part of the + * camera3_stream_buffer_t array, and the fence specified by release_fence + * has been signaled (this is a no-op for -1 fences), the ownership of that + * buffer is considered to be transferred back to the framework. After that, + * the HAL must no longer retain that particular buffer, and the + * framework may clean up the memory for it immediately. + * + * process_capture_result may be called multiple times for a single frame, + * each time with a new disjoint piece of metadata and/or set of gralloc + * buffers. The framework will accumulate these partial metadata results + * into one result. + * + * In particular, it is legal for a process_capture_result to be called + * simultaneously for both a frame N and a frame N+1 as long as the + * above rule holds for gralloc buffers (both input and output). + * + * 11. After some time, the framework may stop submitting new requests, wait for + * the existing captures to complete (all buffers filled, all results + * returned), and then call configure_streams() again. This resets the camera + * hardware and pipeline for a new set of input/output streams. Some streams + * may be reused from the previous configuration; if these streams' buffers + * had already been registered with the HAL, they will not be registered + * again. The framework then continues from step 7, if at least one + * registered output stream remains (otherwise, step 5 is required first). + * + * 12. Alternatively, the framework may call camera3_device_t->common->close() + * to end the camera session. This may be called at any time when no other + * calls from the framework are active, although the call may block until all + * in-flight captures have completed (all results returned, all buffers + * filled). After the close call returns, no more calls to the + * camera3_callback_ops_t functions are allowed from the HAL. Once the + * close() call is underway, the framework may not call any other HAL device + * functions. + * + * 13. In case of an error or other asynchronous event, the HAL must call + * camera3_callback_ops_t->notify() with the appropriate error/event + * message. After returning from a fatal device-wide error notification, the + * HAL should act as if close() had been called on it. However, the HAL must + * either cancel or complete all outstanding captures before calling + * notify(), so that once notify() is called with a fatal error, the + * framework will not receive further callbacks from the device. Methods + * besides close() should return -ENODEV or NULL after the notify() method + * returns from a fatal error message. + */ + +/** + * S3. Operational modes: + * + * The camera 3 HAL device can implement one of two possible operational modes; + * limited and full. Full support is expected from new higher-end + * devices. Limited mode has hardware requirements roughly in line with those + * for a camera HAL device v1 implementation, and is expected from older or + * inexpensive devices. Full is a strict superset of limited, and they share the + * same essential operational flow, as documented above. + * + * The HAL must indicate its level of support with the + * android.info.supportedHardwareLevel static metadata entry, with 0 indicating + * limited mode, and 1 indicating full mode support. + * + * Roughly speaking, limited-mode devices do not allow for application control + * of capture settings (3A control only), high-rate capture of high-resolution + * images, raw sensor readout, or support for YUV output streams above maximum + * recording resolution (JPEG only for large images). + * + * ** Details of limited mode behavior: + * + * - Limited-mode devices do not need to implement accurate synchronization + * between capture request settings and the actual image data + * captured. Instead, changes to settings may take effect some time in the + * future, and possibly not for the same output frame for each settings + * entry. Rapid changes in settings may result in some settings never being + * used for a capture. However, captures that include high-resolution output + * buffers ( > 1080p ) have to use the settings as specified (but see below + * for processing rate). + * + * - Limited-mode devices do not need to support most of the + * settings/result/static info metadata. Specifically, only the following settings + * are expected to be consumed or produced by a limited-mode HAL device: + * + * android.control.aeAntibandingMode (controls and dynamic) + * android.control.aeExposureCompensation (controls and dynamic) + * android.control.aeLock (controls and dynamic) + * android.control.aeMode (controls and dynamic) + * android.control.aeRegions (controls and dynamic) + * android.control.aeTargetFpsRange (controls and dynamic) + * android.control.aePrecaptureTrigger (controls and dynamic) + * android.control.afMode (controls and dynamic) + * android.control.afRegions (controls and dynamic) + * android.control.awbLock (controls and dynamic) + * android.control.awbMode (controls and dynamic) + * android.control.awbRegions (controls and dynamic) + * android.control.captureIntent (controls and dynamic) + * android.control.effectMode (controls and dynamic) + * android.control.mode (controls and dynamic) + * android.control.sceneMode (controls and dynamic) + * android.control.videoStabilizationMode (controls and dynamic) + * android.control.aeAvailableAntibandingModes (static) + * android.control.aeAvailableModes (static) + * android.control.aeAvailableTargetFpsRanges (static) + * android.control.aeCompensationRange (static) + * android.control.aeCompensationStep (static) + * android.control.afAvailableModes (static) + * android.control.availableEffects (static) + * android.control.availableSceneModes (static) + * android.control.availableVideoStabilizationModes (static) + * android.control.awbAvailableModes (static) + * android.control.maxRegions (static) + * android.control.sceneModeOverrides (static) + * android.control.aeState (dynamic) + * android.control.afState (dynamic) + * android.control.awbState (dynamic) + * + * android.flash.mode (controls and dynamic) + * android.flash.info.available (static) + * + * android.info.supportedHardwareLevel (static) + * + * android.jpeg.gpsCoordinates (controls and dynamic) + * android.jpeg.gpsProcessingMethod (controls and dynamic) + * android.jpeg.gpsTimestamp (controls and dynamic) + * android.jpeg.orientation (controls and dynamic) + * android.jpeg.quality (controls and dynamic) + * android.jpeg.thumbnailQuality (controls and dynamic) + * android.jpeg.thumbnailSize (controls and dynamic) + * android.jpeg.availableThumbnailSizes (static) + * android.jpeg.maxSize (static) + * + * android.lens.info.minimumFocusDistance (static) + * + * android.request.id (controls and dynamic) + * + * android.scaler.cropRegion (controls and dynamic) + * android.scaler.availableStreamConfigurations (static) + * android.scaler.availableMinFrameDurations (static) + * android.scaler.availableStallDurations (static) + * android.scaler.availableMaxDigitalZoom (static) + * android.scaler.maxDigitalZoom (static) + * android.scaler.croppingType (static) + * + * android.sensor.orientation (static) + * android.sensor.timestamp (dynamic) + * + * android.statistics.faceDetectMode (controls and dynamic) + * android.statistics.info.availableFaceDetectModes (static) + * android.statistics.faceIds (dynamic) + * android.statistics.faceLandmarks (dynamic) + * android.statistics.faceRectangles (dynamic) + * android.statistics.faceScores (dynamic) + * + * android.sync.frameNumber (dynamic) + * android.sync.maxLatency (static) + * + * - Captures in limited mode that include high-resolution (> 1080p) output + * buffers may block in process_capture_request() until all the output buffers + * have been filled. A full-mode HAL device must process sequences of + * high-resolution requests at the rate indicated in the static metadata for + * that pixel format. The HAL must still call process_capture_result() to + * provide the output; the framework must simply be prepared for + * process_capture_request() to block until after process_capture_result() for + * that request completes for high-resolution captures for limited-mode + * devices. + * + * - Full-mode devices must support below additional capabilities: + * - 30fps at maximum resolution is preferred, more than 20fps is required. + * - Per frame control (android.sync.maxLatency == PER_FRAME_CONTROL). + * - Sensor manual control metadata. See MANUAL_SENSOR defined in + * android.request.availableCapabilities. + * - Post-processing manual control metadata. See MANUAL_POST_PROCESSING defined + * in android.request.availableCapabilities. + * + */ + +/** + * S4. 3A modes and state machines: + * + * While the actual 3A algorithms are up to the HAL implementation, a high-level + * state machine description is defined by the HAL interface, to allow the HAL + * device and the framework to communicate about the current state of 3A, and to + * trigger 3A events. + * + * When the device is opened, all the individual 3A states must be + * STATE_INACTIVE. Stream configuration does not reset 3A. For example, locked + * focus must be maintained across the configure() call. + * + * Triggering a 3A action involves simply setting the relevant trigger entry in + * the settings for the next request to indicate start of trigger. For example, + * the trigger for starting an autofocus scan is setting the entry + * ANDROID_CONTROL_AF_TRIGGER to ANDROID_CONTROL_AF_TRIGGER_START for one + * request, and cancelling an autofocus scan is triggered by setting + * ANDROID_CONTROL_AF_TRIGGER to ANDROID_CONTRL_AF_TRIGGER_CANCEL. Otherwise, + * the entry will not exist, or be set to ANDROID_CONTROL_AF_TRIGGER_IDLE. Each + * request with a trigger entry set to a non-IDLE value will be treated as an + * independent triggering event. + * + * At the top level, 3A is controlled by the ANDROID_CONTROL_MODE setting, which + * selects between no 3A (ANDROID_CONTROL_MODE_OFF), normal AUTO mode + * (ANDROID_CONTROL_MODE_AUTO), and using the scene mode setting + * (ANDROID_CONTROL_USE_SCENE_MODE). + * + * - In OFF mode, each of the individual AE/AF/AWB modes are effectively OFF, + * and none of the capture controls may be overridden by the 3A routines. + * + * - In AUTO mode, Auto-focus, auto-exposure, and auto-whitebalance all run + * their own independent algorithms, and have their own mode, state, and + * trigger metadata entries, as listed in the next section. + * + * - In USE_SCENE_MODE, the value of the ANDROID_CONTROL_SCENE_MODE entry must + * be used to determine the behavior of 3A routines. In SCENE_MODEs other than + * FACE_PRIORITY, the HAL must override the values of + * ANDROId_CONTROL_AE/AWB/AF_MODE to be the mode it prefers for the selected + * SCENE_MODE. For example, the HAL may prefer SCENE_MODE_NIGHT to use + * CONTINUOUS_FOCUS AF mode. Any user selection of AE/AWB/AF_MODE when scene + * must be ignored for these scene modes. + * + * - For SCENE_MODE_FACE_PRIORITY, the AE/AWB/AF_MODE controls work as in + * ANDROID_CONTROL_MODE_AUTO, but the 3A routines must bias toward metering + * and focusing on any detected faces in the scene. + * + * S4.1. Auto-focus settings and result entries: + * + * Main metadata entries: + * + * ANDROID_CONTROL_AF_MODE: Control for selecting the current autofocus + * mode. Set by the framework in the request settings. + * + * AF_MODE_OFF: AF is disabled; the framework/app directly controls lens + * position. + * + * AF_MODE_AUTO: Single-sweep autofocus. No lens movement unless AF is + * triggered. + * + * AF_MODE_MACRO: Single-sweep up-close autofocus. No lens movement unless + * AF is triggered. + * + * AF_MODE_CONTINUOUS_VIDEO: Smooth continuous focusing, for recording + * video. Triggering immediately locks focus in current + * position. Canceling resumes cotinuous focusing. + * + * AF_MODE_CONTINUOUS_PICTURE: Fast continuous focusing, for + * zero-shutter-lag still capture. Triggering locks focus once currently + * active sweep concludes. Canceling resumes continuous focusing. + * + * AF_MODE_EDOF: Advanced extended depth of field focusing. There is no + * autofocus scan, so triggering one or canceling one has no effect. + * Images are focused automatically by the HAL. + * + * ANDROID_CONTROL_AF_STATE: Dynamic metadata describing the current AF + * algorithm state, reported by the HAL in the result metadata. + * + * AF_STATE_INACTIVE: No focusing has been done, or algorithm was + * reset. Lens is not moving. Always the state for MODE_OFF or MODE_EDOF. + * When the device is opened, it must start in this state. + * + * AF_STATE_PASSIVE_SCAN: A continuous focus algorithm is currently scanning + * for good focus. The lens is moving. + * + * AF_STATE_PASSIVE_FOCUSED: A continuous focus algorithm believes it is + * well focused. The lens is not moving. The HAL may spontaneously leave + * this state. + * + * AF_STATE_PASSIVE_UNFOCUSED: A continuous focus algorithm believes it is + * not well focused. The lens is not moving. The HAL may spontaneously + * leave this state. + * + * AF_STATE_ACTIVE_SCAN: A scan triggered by the user is underway. + * + * AF_STATE_FOCUSED_LOCKED: The AF algorithm believes it is focused. The + * lens is not moving. + * + * AF_STATE_NOT_FOCUSED_LOCKED: The AF algorithm has been unable to + * focus. The lens is not moving. + * + * ANDROID_CONTROL_AF_TRIGGER: Control for starting an autofocus scan, the + * meaning of which is mode- and state- dependent. Set by the framework in + * the request settings. + * + * AF_TRIGGER_IDLE: No current trigger. + * + * AF_TRIGGER_START: Trigger start of AF scan. Effect is mode and state + * dependent. + * + * AF_TRIGGER_CANCEL: Cancel current AF scan if any, and reset algorithm to + * default. + * + * Additional metadata entries: + * + * ANDROID_CONTROL_AF_REGIONS: Control for selecting the regions of the FOV + * that should be used to determine good focus. This applies to all AF + * modes that scan for focus. Set by the framework in the request + * settings. + * + * S4.2. Auto-exposure settings and result entries: + * + * Main metadata entries: + * + * ANDROID_CONTROL_AE_MODE: Control for selecting the current auto-exposure + * mode. Set by the framework in the request settings. + * + * AE_MODE_OFF: Autoexposure is disabled; the user controls exposure, gain, + * frame duration, and flash. + * + * AE_MODE_ON: Standard autoexposure, with flash control disabled. User may + * set flash to fire or to torch mode. + * + * AE_MODE_ON_AUTO_FLASH: Standard autoexposure, with flash on at HAL's + * discretion for precapture and still capture. User control of flash + * disabled. + * + * AE_MODE_ON_ALWAYS_FLASH: Standard autoexposure, with flash always fired + * for capture, and at HAL's discretion for precapture.. User control of + * flash disabled. + * + * AE_MODE_ON_AUTO_FLASH_REDEYE: Standard autoexposure, with flash on at + * HAL's discretion for precapture and still capture. Use a flash burst + * at end of precapture sequence to reduce redeye in the final + * picture. User control of flash disabled. + * + * ANDROID_CONTROL_AE_STATE: Dynamic metadata describing the current AE + * algorithm state, reported by the HAL in the result metadata. + * + * AE_STATE_INACTIVE: Initial AE state after mode switch. When the device is + * opened, it must start in this state. + * + * AE_STATE_SEARCHING: AE is not converged to a good value, and is adjusting + * exposure parameters. + * + * AE_STATE_CONVERGED: AE has found good exposure values for the current + * scene, and the exposure parameters are not changing. HAL may + * spontaneously leave this state to search for better solution. + * + * AE_STATE_LOCKED: AE has been locked with the AE_LOCK control. Exposure + * values are not changing. + * + * AE_STATE_FLASH_REQUIRED: The HAL has converged exposure, but believes + * flash is required for a sufficiently bright picture. Used for + * determining if a zero-shutter-lag frame can be used. + * + * AE_STATE_PRECAPTURE: The HAL is in the middle of a precapture + * sequence. Depending on AE mode, this mode may involve firing the + * flash for metering, or a burst of flash pulses for redeye reduction. + * + * ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER: Control for starting a metering + * sequence before capturing a high-quality image. Set by the framework in + * the request settings. + * + * PRECAPTURE_TRIGGER_IDLE: No current trigger. + * + * PRECAPTURE_TRIGGER_START: Start a precapture sequence. The HAL should + * use the subsequent requests to measure good exposure/white balance + * for an upcoming high-resolution capture. + * + * Additional metadata entries: + * + * ANDROID_CONTROL_AE_LOCK: Control for locking AE controls to their current + * values + * + * ANDROID_CONTROL_AE_EXPOSURE_COMPENSATION: Control for adjusting AE + * algorithm target brightness point. + * + * ANDROID_CONTROL_AE_TARGET_FPS_RANGE: Control for selecting the target frame + * rate range for the AE algorithm. The AE routine cannot change the frame + * rate to be outside these bounds. + * + * ANDROID_CONTROL_AE_REGIONS: Control for selecting the regions of the FOV + * that should be used to determine good exposure levels. This applies to + * all AE modes besides OFF. + * + * S4.3. Auto-whitebalance settings and result entries: + * + * Main metadata entries: + * + * ANDROID_CONTROL_AWB_MODE: Control for selecting the current white-balance + * mode. + * + * AWB_MODE_OFF: Auto-whitebalance is disabled. User controls color matrix. + * + * AWB_MODE_AUTO: Automatic white balance is enabled; 3A controls color + * transform, possibly using more complex transforms than a simple + * matrix. + * + * AWB_MODE_INCANDESCENT: Fixed white balance settings good for indoor + * incandescent (tungsten) lighting, roughly 2700K. + * + * AWB_MODE_FLUORESCENT: Fixed white balance settings good for fluorescent + * lighting, roughly 5000K. + * + * AWB_MODE_WARM_FLUORESCENT: Fixed white balance settings good for + * fluorescent lighting, roughly 3000K. + * + * AWB_MODE_DAYLIGHT: Fixed white balance settings good for daylight, + * roughly 5500K. + * + * AWB_MODE_CLOUDY_DAYLIGHT: Fixed white balance settings good for clouded + * daylight, roughly 6500K. + * + * AWB_MODE_TWILIGHT: Fixed white balance settings good for + * near-sunset/sunrise, roughly 15000K. + * + * AWB_MODE_SHADE: Fixed white balance settings good for areas indirectly + * lit by the sun, roughly 7500K. + * + * ANDROID_CONTROL_AWB_STATE: Dynamic metadata describing the current AWB + * algorithm state, reported by the HAL in the result metadata. + * + * AWB_STATE_INACTIVE: Initial AWB state after mode switch. When the device + * is opened, it must start in this state. + * + * AWB_STATE_SEARCHING: AWB is not converged to a good value, and is + * changing color adjustment parameters. + * + * AWB_STATE_CONVERGED: AWB has found good color adjustment values for the + * current scene, and the parameters are not changing. HAL may + * spontaneously leave this state to search for better solution. + * + * AWB_STATE_LOCKED: AWB has been locked with the AWB_LOCK control. Color + * adjustment values are not changing. + * + * Additional metadata entries: + * + * ANDROID_CONTROL_AWB_LOCK: Control for locking AWB color adjustments to + * their current values. + * + * ANDROID_CONTROL_AWB_REGIONS: Control for selecting the regions of the FOV + * that should be used to determine good color balance. This applies only + * to auto-WB mode. + * + * S4.4. General state machine transition notes + * + * Switching between AF, AE, or AWB modes always resets the algorithm's state + * to INACTIVE. Similarly, switching between CONTROL_MODE or + * CONTROL_SCENE_MODE if CONTROL_MODE == USE_SCENE_MODE resets all the + * algorithm states to INACTIVE. + * + * The tables below are per-mode. + * + * S4.5. AF state machines + * + * when enabling AF or changing AF mode + *| state | trans. cause | new state | notes | + *+--------------------+---------------+--------------------+------------------+ + *| Any | AF mode change| INACTIVE | | + *+--------------------+---------------+--------------------+------------------+ + * + * mode = AF_MODE_OFF or AF_MODE_EDOF + *| state | trans. cause | new state | notes | + *+--------------------+---------------+--------------------+------------------+ + *| INACTIVE | | INACTIVE | Never changes | + *+--------------------+---------------+--------------------+------------------+ + * + * mode = AF_MODE_AUTO or AF_MODE_MACRO + *| state | trans. cause | new state | notes | + *+--------------------+---------------+--------------------+------------------+ + *| INACTIVE | AF_TRIGGER | ACTIVE_SCAN | Start AF sweep | + *| | | | Lens now moving | + *+--------------------+---------------+--------------------+------------------+ + *| ACTIVE_SCAN | AF sweep done | FOCUSED_LOCKED | If AF successful | + *| | | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| ACTIVE_SCAN | AF sweep done | NOT_FOCUSED_LOCKED | If AF successful | + *| | | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| ACTIVE_SCAN | AF_CANCEL | INACTIVE | Cancel/reset AF | + *| | | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Cancel/reset AF | + *+--------------------+---------------+--------------------+------------------+ + *| FOCUSED_LOCKED | AF_TRIGGER | ACTIVE_SCAN | Start new sweep | + *| | | | Lens now moving | + *+--------------------+---------------+--------------------+------------------+ + *| NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Cancel/reset AF | + *+--------------------+---------------+--------------------+------------------+ + *| NOT_FOCUSED_LOCKED | AF_TRIGGER | ACTIVE_SCAN | Start new sweep | + *| | | | Lens now moving | + *+--------------------+---------------+--------------------+------------------+ + *| All states | mode change | INACTIVE | | + *+--------------------+---------------+--------------------+------------------+ + * + * mode = AF_MODE_CONTINUOUS_VIDEO + *| state | trans. cause | new state | notes | + *+--------------------+---------------+--------------------+------------------+ + *| INACTIVE | HAL initiates | PASSIVE_SCAN | Start AF scan | + *| | new scan | | Lens now moving | + *+--------------------+---------------+--------------------+------------------+ + *| INACTIVE | AF_TRIGGER | NOT_FOCUSED_LOCKED | AF state query | + *| | | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_SCAN | HAL completes | PASSIVE_FOCUSED | End AF scan | + *| | current scan | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_SCAN | HAL fails | PASSIVE_UNFOCUSED | End AF scan | + *| | current scan | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_SCAN | AF_TRIGGER | FOCUSED_LOCKED | Immediate trans. | + *| | | | if focus is good | + *| | | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_SCAN | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate trans. | + *| | | | if focus is bad | + *| | | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_SCAN | AF_CANCEL | INACTIVE | Reset lens | + *| | | | position | + *| | | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_FOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan | + *| | new scan | | Lens now moving | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_UNFOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan | + *| | new scan | | Lens now moving | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_FOCUSED | AF_TRIGGER | FOCUSED_LOCKED | Immediate trans. | + *| | | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_UNFOCUSED | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate trans. | + *| | | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| FOCUSED_LOCKED | AF_TRIGGER | FOCUSED_LOCKED | No effect | + *+--------------------+---------------+--------------------+------------------+ + *| FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan | + *+--------------------+---------------+--------------------+------------------+ + *| NOT_FOCUSED_LOCKED | AF_TRIGGER | NOT_FOCUSED_LOCKED | No effect | + *+--------------------+---------------+--------------------+------------------+ + *| NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan | + *+--------------------+---------------+--------------------+------------------+ + * + * mode = AF_MODE_CONTINUOUS_PICTURE + *| state | trans. cause | new state | notes | + *+--------------------+---------------+--------------------+------------------+ + *| INACTIVE | HAL initiates | PASSIVE_SCAN | Start AF scan | + *| | new scan | | Lens now moving | + *+--------------------+---------------+--------------------+------------------+ + *| INACTIVE | AF_TRIGGER | NOT_FOCUSED_LOCKED | AF state query | + *| | | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_SCAN | HAL completes | PASSIVE_FOCUSED | End AF scan | + *| | current scan | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_SCAN | HAL fails | PASSIVE_UNFOCUSED | End AF scan | + *| | current scan | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_SCAN | AF_TRIGGER | FOCUSED_LOCKED | Eventual trans. | + *| | | | once focus good | + *| | | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_SCAN | AF_TRIGGER | NOT_FOCUSED_LOCKED | Eventual trans. | + *| | | | if cannot focus | + *| | | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_SCAN | AF_CANCEL | INACTIVE | Reset lens | + *| | | | position | + *| | | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_FOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan | + *| | new scan | | Lens now moving | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_UNFOCUSED | HAL initiates | PASSIVE_SCAN | Start AF scan | + *| | new scan | | Lens now moving | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_FOCUSED | AF_TRIGGER | FOCUSED_LOCKED | Immediate trans. | + *| | | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| PASSIVE_UNFOCUSED | AF_TRIGGER | NOT_FOCUSED_LOCKED | Immediate trans. | + *| | | | Lens now locked | + *+--------------------+---------------+--------------------+------------------+ + *| FOCUSED_LOCKED | AF_TRIGGER | FOCUSED_LOCKED | No effect | + *+--------------------+---------------+--------------------+------------------+ + *| FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan | + *+--------------------+---------------+--------------------+------------------+ + *| NOT_FOCUSED_LOCKED | AF_TRIGGER | NOT_FOCUSED_LOCKED | No effect | + *+--------------------+---------------+--------------------+------------------+ + *| NOT_FOCUSED_LOCKED | AF_CANCEL | INACTIVE | Restart AF scan | + *+--------------------+---------------+--------------------+------------------+ + * + * S4.6. AE and AWB state machines + * + * The AE and AWB state machines are mostly identical. AE has additional + * FLASH_REQUIRED and PRECAPTURE states. So rows below that refer to those two + * states should be ignored for the AWB state machine. + * + * when enabling AE/AWB or changing AE/AWB mode + *| state | trans. cause | new state | notes | + *+--------------------+---------------+--------------------+------------------+ + *| Any | mode change | INACTIVE | | + *+--------------------+---------------+--------------------+------------------+ + * + * mode = AE_MODE_OFF / AWB mode not AUTO + *| state | trans. cause | new state | notes | + *+--------------------+---------------+--------------------+------------------+ + *| INACTIVE | | INACTIVE | AE/AWB disabled | + *+--------------------+---------------+--------------------+------------------+ + * + * mode = AE_MODE_ON_* / AWB_MODE_AUTO + *| state | trans. cause | new state | notes | + *+--------------------+---------------+--------------------+------------------+ + *| INACTIVE | HAL initiates | SEARCHING | | + *| | AE/AWB scan | | | + *+--------------------+---------------+--------------------+------------------+ + *| INACTIVE | AE/AWB_LOCK | LOCKED | values locked | + *| | on | | | + *+--------------------+---------------+--------------------+------------------+ + *| SEARCHING | HAL finishes | CONVERGED | good values, not | + *| | AE/AWB scan | | changing | + *+--------------------+---------------+--------------------+------------------+ + *| SEARCHING | HAL finishes | FLASH_REQUIRED | converged but too| + *| | AE scan | | dark w/o flash | + *+--------------------+---------------+--------------------+------------------+ + *| SEARCHING | AE/AWB_LOCK | LOCKED | values locked | + *| | on | | | + *+--------------------+---------------+--------------------+------------------+ + *| CONVERGED | HAL initiates | SEARCHING | values locked | + *| | AE/AWB scan | | | + *+--------------------+---------------+--------------------+------------------+ + *| CONVERGED | AE/AWB_LOCK | LOCKED | values locked | + *| | on | | | + *+--------------------+---------------+--------------------+------------------+ + *| FLASH_REQUIRED | HAL initiates | SEARCHING | values locked | + *| | AE/AWB scan | | | + *+--------------------+---------------+--------------------+------------------+ + *| FLASH_REQUIRED | AE/AWB_LOCK | LOCKED | values locked | + *| | on | | | + *+--------------------+---------------+--------------------+------------------+ + *| LOCKED | AE/AWB_LOCK | SEARCHING | values not good | + *| | off | | after unlock | + *+--------------------+---------------+--------------------+------------------+ + *| LOCKED | AE/AWB_LOCK | CONVERGED | values good | + *| | off | | after unlock | + *+--------------------+---------------+--------------------+------------------+ + *| LOCKED | AE_LOCK | FLASH_REQUIRED | exposure good, | + *| | off | | but too dark | + *+--------------------+---------------+--------------------+------------------+ + *| All AE states | PRECAPTURE_ | PRECAPTURE | Start precapture | + *| | START | | sequence | + *+--------------------+---------------+--------------------+------------------+ + *| PRECAPTURE | Sequence done.| CONVERGED | Ready for high- | + *| | AE_LOCK off | | quality capture | + *+--------------------+---------------+--------------------+------------------+ + *| PRECAPTURE | Sequence done.| LOCKED | Ready for high- | + *| | AE_LOCK on | | quality capture | + *+--------------------+---------------+--------------------+------------------+ + * + */ + +/** + * S5. Cropping: + * + * Cropping of the full pixel array (for digital zoom and other use cases where + * a smaller FOV is desirable) is communicated through the + * ANDROID_SCALER_CROP_REGION setting. This is a per-request setting, and can + * change on a per-request basis, which is critical for implementing smooth + * digital zoom. + * + * The region is defined as a rectangle (x, y, width, height), with (x, y) + * describing the top-left corner of the rectangle. The rectangle is defined on + * the coordinate system of the sensor active pixel array, with (0,0) being the + * top-left pixel of the active pixel array. Therefore, the width and height + * cannot be larger than the dimensions reported in the + * ANDROID_SENSOR_ACTIVE_PIXEL_ARRAY static info field. The minimum allowed + * width and height are reported by the HAL through the + * ANDROID_SCALER_MAX_DIGITAL_ZOOM static info field, which describes the + * maximum supported zoom factor. Therefore, the minimum crop region width and + * height are: + * + * {width, height} = + * { floor(ANDROID_SENSOR_ACTIVE_PIXEL_ARRAY[0] / + * ANDROID_SCALER_MAX_DIGITAL_ZOOM), + * floor(ANDROID_SENSOR_ACTIVE_PIXEL_ARRAY[1] / + * ANDROID_SCALER_MAX_DIGITAL_ZOOM) } + * + * If the crop region needs to fulfill specific requirements (for example, it + * needs to start on even coordinates, and its width/height needs to be even), + * the HAL must do the necessary rounding and write out the final crop region + * used in the output result metadata. Similarly, if the HAL implements video + * stabilization, it must adjust the result crop region to describe the region + * actually included in the output after video stabilization is applied. In + * general, a camera-using application must be able to determine the field of + * view it is receiving based on the crop region, the dimensions of the image + * sensor, and the lens focal length. + * + * It is assumed that the cropping is applied after raw to other color space + * conversion. Raw streams (RAW16 and RAW_OPAQUE) don't have this conversion stage, + * and are not croppable. Therefore, the crop region must be ignored by the HAL + * for raw streams. + * + * Since the crop region applies to all non-raw streams, which may have different aspect + * ratios than the crop region, the exact sensor region used for each stream may + * be smaller than the crop region. Specifically, each stream should maintain + * square pixels and its aspect ratio by minimally further cropping the defined + * crop region. If the stream's aspect ratio is wider than the crop region, the + * stream should be further cropped vertically, and if the stream's aspect ratio + * is narrower than the crop region, the stream should be further cropped + * horizontally. + * + * In all cases, the stream crop must be centered within the full crop region, + * and each stream is only either cropped horizontally or vertical relative to + * the full crop region, never both. + * + * For example, if two streams are defined, a 640x480 stream (4:3 aspect), and a + * 1280x720 stream (16:9 aspect), below demonstrates the expected output regions + * for each stream for a few sample crop regions, on a hypothetical 3 MP (2000 x + * 1500 pixel array) sensor. + * + * Crop region: (500, 375, 1000, 750) (4:3 aspect ratio) + * + * 640x480 stream crop: (500, 375, 1000, 750) (equal to crop region) + * 1280x720 stream crop: (500, 469, 1000, 562) (marked with =) + * + * 0 1000 2000 + * +---------+---------+---------+----------+ + * | Active pixel array | + * | | + * | | + * + +-------------------+ + 375 + * | | | | + * | O===================O | + * | I 1280x720 stream I | + * + I I + 750 + * | I I | + * | O===================O | + * | | | | + * + +-------------------+ + 1125 + * | Crop region, 640x480 stream | + * | | + * | | + * +---------+---------+---------+----------+ 1500 + * + * Crop region: (500, 375, 1333, 750) (16:9 aspect ratio) + * + * 640x480 stream crop: (666, 375, 1000, 750) (marked with =) + * 1280x720 stream crop: (500, 375, 1333, 750) (equal to crop region) + * + * 0 1000 2000 + * +---------+---------+---------+----------+ + * | Active pixel array | + * | | + * | | + * + +---O==================O---+ + 375 + * | | I 640x480 stream I | | + * | | I I | | + * | | I I | | + * + | I I | + 750 + * | | I I | | + * | | I I | | + * | | I I | | + * + +---O==================O---+ + 1125 + * | Crop region, 1280x720 stream | + * | | + * | | + * +---------+---------+---------+----------+ 1500 + * + * Crop region: (500, 375, 750, 750) (1:1 aspect ratio) + * + * 640x480 stream crop: (500, 469, 750, 562) (marked with =) + * 1280x720 stream crop: (500, 543, 750, 414) (marged with #) + * + * 0 1000 2000 + * +---------+---------+---------+----------+ + * | Active pixel array | + * | | + * | | + * + +--------------+ + 375 + * | O==============O | + * | ################ | + * | # # | + * + # # + 750 + * | # # | + * | ################ 1280x720 | + * | O==============O 640x480 | + * + +--------------+ + 1125 + * | Crop region | + * | | + * | | + * +---------+---------+---------+----------+ 1500 + * + * And a final example, a 1024x1024 square aspect ratio stream instead of the + * 480p stream: + * + * Crop region: (500, 375, 1000, 750) (4:3 aspect ratio) + * + * 1024x1024 stream crop: (625, 375, 750, 750) (marked with #) + * 1280x720 stream crop: (500, 469, 1000, 562) (marked with =) + * + * 0 1000 2000 + * +---------+---------+---------+----------+ + * | Active pixel array | + * | | + * | 1024x1024 stream | + * + +--###############--+ + 375 + * | | # # | | + * | O===================O | + * | I 1280x720 stream I | + * + I I + 750 + * | I I | + * | O===================O | + * | | # # | | + * + +--###############--+ + 1125 + * | Crop region | + * | | + * | | + * +---------+---------+---------+----------+ 1500 + * + */ + +/** + * S6. Error management: + * + * Camera HAL device ops functions that have a return value will all return + * -ENODEV / NULL in case of a serious error. This means the device cannot + * continue operation, and must be closed by the framework. Once this error is + * returned by some method, or if notify() is called with ERROR_DEVICE, only + * the close() method can be called successfully. All other methods will return + * -ENODEV / NULL. + * + * If a device op is called in the wrong sequence, for example if the framework + * calls configure_streams() is called before initialize(), the device must + * return -ENOSYS from the call, and do nothing. + * + * Transient errors in image capture must be reported through notify() as follows: + * + * - The failure of an entire capture to occur must be reported by the HAL by + * calling notify() with ERROR_REQUEST. Individual errors for the result + * metadata or the output buffers must not be reported in this case. + * + * - If the metadata for a capture cannot be produced, but some image buffers + * were filled, the HAL must call notify() with ERROR_RESULT. + * + * - If an output image buffer could not be filled, but either the metadata was + * produced or some other buffers were filled, the HAL must call notify() with + * ERROR_BUFFER for each failed buffer. + * + * In each of these transient failure cases, the HAL must still call + * process_capture_result, with valid output and input (if an input buffer was + * submitted) buffer_handle_t. If the result metadata could not be produced, it + * should be NULL. If some buffers could not be filled, they must be returned with + * process_capture_result in the error state, their release fences must be set to + * the acquire fences passed by the framework, or -1 if they have been waited on by + * the HAL already. + * + * Invalid input arguments result in -EINVAL from the appropriate methods. In + * that case, the framework must act as if that call had never been made. + * + */ + +/** + * S7. Key Performance Indicator (KPI) glossary: + * + * This includes some critical definitions that are used by KPI metrics. + * + * Pipeline Latency: + * For a given capture request, the duration from the framework calling + * process_capture_request to the HAL sending capture result and all buffers + * back by process_capture_result call. To make the Pipeline Latency measure + * independent of frame rate, it is measured by frame count. + * + * For example, when frame rate is 30 (fps), the frame duration (time interval + * between adjacent frame capture time) is 33 (ms). + * If it takes 5 frames for framework to get the result and buffers back for + * a given request, then the Pipeline Latency is 5 (frames), instead of + * 5 x 33 = 165 (ms). + * + * The Pipeline Latency is determined by android.request.pipelineDepth and + * android.request.pipelineMaxDepth, see their definitions for more details. + * + */ + +/** + * S8. Sample Use Cases: + * + * This includes some typical use case examples the camera HAL may support. + * + * S8.1 Zero Shutter Lag (ZSL) with CAMERA3_STREAM_BIDIRECTIONAL stream. + * + * For this use case, the bidirectional stream will be used by the framework as follows: + * + * 1. The framework includes a buffer from this stream as output buffer in a + * request as normal. + * + * 2. Once the HAL device returns a filled output buffer to the framework, + * the framework may do one of two things with the filled buffer: + * + * 2. a. The framework uses the filled data, and returns the now-used buffer + * to the stream queue for reuse. This behavior exactly matches the + * OUTPUT type of stream. + * + * 2. b. The framework wants to reprocess the filled data, and uses the + * buffer as an input buffer for a request. Once the HAL device has + * used the reprocessing buffer, it then returns it to the + * framework. The framework then returns the now-used buffer to the + * stream queue for reuse. + * + * 3. The HAL device will be given the buffer again as an output buffer for + * a request at some future point. + * + * For ZSL use case, the pixel format for bidirectional stream will be + * HAL_PIXEL_FORMAT_RAW_OPAQUE or HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED if it + * is listed in android.scaler.availableInputOutputFormatsMap. When + * HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED is used, the gralloc + * usage flags for the consumer endpoint will be set to GRALLOC_USAGE_HW_CAMERA_ZSL. + * A configuration stream list that has BIDIRECTIONAL stream used as input, will + * usually also have a distinct OUTPUT stream to get the reprocessing data. For example, + * for the ZSL use case, the stream list might be configured with the following: + * + * - A HAL_PIXEL_FORMAT_RAW_OPAQUE bidirectional stream is used + * as input. + * - And a HAL_PIXEL_FORMAT_BLOB (JPEG) output stream. + * + * S8.2 ZSL (OPAQUE) reprocessing with CAMERA3_STREAM_INPUT stream. + * + * CAMERA_DEVICE_API_VERSION_3_3: + * When OPAQUE_REPROCESSING capability is supported by the camera device, the INPUT stream + * can be used for application/framework implemented use case like Zero Shutter Lag (ZSL). + * This kind of stream will be used by the framework as follows: + * + * 1. Application/framework configures an opaque (RAW or YUV based) format output stream that is + * used to produce the ZSL output buffers. The stream pixel format will be + * HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED. + * + * 2. Application/framework configures an opaque format input stream that is used to + * send the reprocessing ZSL buffers to the HAL. The stream pixel format will + * also be HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED. + * + * 3. Application/framework configures a YUV/JPEG output stream that is used to receive the + * reprocessed data. The stream pixel format will be YCbCr_420/HAL_PIXEL_FORMAT_BLOB. + * + * 4. Application/framework picks a ZSL buffer from the ZSL output stream when a ZSL capture is + * issued by the application, and sends the data back as an input buffer in a + * reprocessing request, then sends to the HAL for reprocessing. + * + * 5. The HAL sends back the output YUV/JPEG result to framework. + * + * The HAL can select the actual opaque buffer format and configure the ISP pipeline + * appropriately based on the HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED format and + * the gralloc usage flag GRALLOC_USAGE_HW_CAMERA_ZSL. + + * S8.3 YUV reprocessing with CAMERA3_STREAM_INPUT stream. + * + * When YUV reprocessing is supported by the HAL, the INPUT stream + * can be used for the YUV reprocessing use cases like lucky-shot and image fusion. + * This kind of stream will be used by the framework as follows: + * + * 1. Application/framework configures an YCbCr_420 format output stream that is + * used to produce the output buffers. + * + * 2. Application/framework configures an YCbCr_420 format input stream that is used to + * send the reprocessing YUV buffers to the HAL. + * + * 3. Application/framework configures a YUV/JPEG output stream that is used to receive the + * reprocessed data. The stream pixel format will be YCbCr_420/HAL_PIXEL_FORMAT_BLOB. + * + * 4. Application/framework processes the output buffers (could be as simple as picking + * an output buffer directly) from the output stream when a capture is issued, and sends + * the data back as an input buffer in a reprocessing request, then sends to the HAL + * for reprocessing. + * + * 5. The HAL sends back the output YUV/JPEG result to framework. + * + */ + +/** + * S9. Notes on Controls and Metadata + * + * This section contains notes about the interpretation and usage of various metadata tags. + * + * S9.1 HIGH_QUALITY and FAST modes. + * + * Many camera post-processing blocks may be listed as having HIGH_QUALITY, + * FAST, and OFF operating modes. These blocks will typically also have an + * 'available modes' tag representing which of these operating modes are + * available on a given device. The general policy regarding implementing + * these modes is as follows: + * + * 1. Operating mode controls of hardware blocks that cannot be disabled + * must not list OFF in their corresponding 'available modes' tags. + * + * 2. OFF will always be included in their corresponding 'available modes' + * tag if it is possible to disable that hardware block. + * + * 3. FAST must always be included in the 'available modes' tags for all + * post-processing blocks supported on the device. If a post-processing + * block also has a slower and higher quality operating mode that does + * not meet the framerate requirements for FAST mode, HIGH_QUALITY should + * be included in the 'available modes' tag to represent this operating + * mode. + */ + +/** + * S10. Reprocessing flow and controls + * + * This section describes the OPAQUE and YUV reprocessing flow and controls. OPAQUE reprocessing + * uses an opaque format that is not directly application-visible, and the application can + * only select some of the output buffers and send back to HAL for reprocessing, while YUV + * reprocessing gives the application opportunity to process the buffers before reprocessing. + * + * S8 gives the stream configurations for the typical reprocessing uses cases, + * this section specifies the buffer flow and controls in more details. + * + * S10.1 OPAQUE (typically for ZSL use case) reprocessing flow and controls + * + * For OPAQUE reprocessing (e.g. ZSL) use case, after the application creates the specific + * output and input streams, runtime buffer flow and controls are specified as below: + * + * 1. Application starts output streaming by sending repeating requests for output + * opaque buffers and preview. The buffers are held by an application + * maintained circular buffer. The requests are based on CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG + * capture template, which should have all necessary settings that guarantee output + * frame rate is not slowed down relative to sensor output frame rate. + * + * 2. When a capture is issued, the application selects one output buffer based + * on application buffer selection logic, e.g. good AE and AF statistics etc. + * Application then creates an reprocess request based on the capture result associated + * with this selected buffer. The selected output buffer is now added to this reprocess + * request as an input buffer, the output buffer of this reprocess request should be + * either JPEG output buffer or YUV output buffer, or both, depending on the application + * choice. + * + * 3. Application then alters the reprocess settings to get best image quality. The HAL must + * support and only support below controls if the HAL support OPAQUE_REPROCESSING capability: + * - android.jpeg.* (if JPEG buffer is included as one of the output) + * - android.noiseReduction.mode (change to HIGH_QUALITY if it is supported) + * - android.edge.mode (change to HIGH_QUALITY if it is supported) + * All other controls must be ignored by the HAL. + * 4. HAL processed the input buffer and return the output buffers in the capture results + * as normal. + * + * S10.2 YUV reprocessing flow and controls + * + * The YUV reprocessing buffer flow is similar as OPAQUE reprocessing, with below difference: + * + * 1. Application may want to have finer granularity control of the intermediate YUV images + * (before reprocessing). For example, application may choose + * - android.noiseReduction.mode == MINIMAL + * to make sure the no YUV domain noise reduction has applied to the output YUV buffers, + * then it can do its own advanced noise reduction on them. For OPAQUE reprocessing case, this + * doesn't matter, as long as the final reprocessed image has the best quality. + * 2. Application may modify the YUV output buffer data. For example, for image fusion use + * case, where multiple output images are merged together to improve the signal-to-noise + * ratio (SNR). The input buffer may be generated from multiple buffers by the application. + * To avoid excessive amount of noise reduction and insufficient amount of edge enhancement + * being applied to the input buffer, the application can hint the HAL how much effective + * exposure time improvement has been done by the application, then the HAL can adjust the + * noise reduction and edge enhancement paramters to get best reprocessed image quality. + * Below tag can be used for this purpose: + * - android.reprocess.effectiveExposureFactor + * The value would be exposure time increase factor applied to the original output image, + * for example, if there are N image merged, the exposure time increase factor would be up + * to sqrt(N). See this tag spec for more details. + * + * S10.3 Reprocessing pipeline characteristics + * + * Reprocessing pipeline has below different characteristics comparing with normal output + * pipeline: + * + * 1. The reprocessing result can be returned ahead of the pending normal output results. But + * the FIFO ordering must be maintained for all reprocessing results. For example, there are + * below requests (A stands for output requests, B stands for reprocessing requests) + * being processed by the HAL: + * A1, A2, A3, A4, B1, A5, B2, A6... + * result of B1 can be returned before A1-A4, but result of B2 must be returned after B1. + * 2. Single input rule: For a given reprocessing request, all output buffers must be from the + * input buffer, rather than sensor output. For example, if a reprocess request include both + * JPEG and preview buffers, all output buffers must be produced from the input buffer + * included by the reprocessing request, rather than sensor. The HAL must not output preview + * buffers from sensor, while output JPEG buffer from the input buffer. + * 3. Input buffer will be from camera output directly (ZSL case) or indirectly(image fusion + * case). For the case where buffer is modified, the size will remain same. The HAL can + * notify CAMERA3_MSG_ERROR_REQUEST if buffer from unknown source is sent. + * 4. Result as reprocessing request: The HAL can expect that a reprocessing request is a copy + * of one of the output results with minor allowed setting changes. The HAL can notify + * CAMERA3_MSG_ERROR_REQUEST if a request from unknown source is issued. + * 5. Output buffers may not be used as inputs across the configure stream boundary, This is + * because an opaque stream like the ZSL output stream may have different actual image size + * inside of the ZSL buffer to save power and bandwidth for smaller resolution JPEG capture. + * The HAL may notify CAMERA3_MSG_ERROR_REQUEST if this case occurs. + * 6. HAL Reprocess requests error reporting during flush should follow the same rule specified + * by flush() method. + * + */ + +__BEGIN_DECLS + +struct camera3_device; + +/********************************************************************** + * + * Camera3 stream and stream buffer definitions. + * + * These structs and enums define the handles and contents of the input and + * output streams connecting the HAL to various framework and application buffer + * consumers. Each stream is backed by a gralloc buffer queue. + * + */ + +/** + * camera3_stream_type_t: + * + * The type of the camera stream, which defines whether the camera HAL device is + * the producer or the consumer for that stream, and how the buffers of the + * stream relate to the other streams. + */ +typedef enum camera3_stream_type { + /** + * This stream is an output stream; the camera HAL device will be + * responsible for filling buffers from this stream with newly captured or + * reprocessed image data. + */ + CAMERA3_STREAM_OUTPUT = 0, + + /** + * This stream is an input stream; the camera HAL device will be responsible + * for reading buffers from this stream and sending them through the camera + * processing pipeline, as if the buffer was a newly captured image from the + * imager. + * + * The pixel format for input stream can be any format reported by + * android.scaler.availableInputOutputFormatsMap. The pixel format of the + * output stream that is used to produce the reprocessing data may be any + * format reported by android.scaler.availableStreamConfigurations. The + * supported input/output stream combinations depends the camera device + * capabilities, see android.scaler.availableInputOutputFormatsMap for + * stream map details. + * + * This kind of stream is generally used to reprocess data into higher + * quality images (that otherwise would cause a frame rate performance + * loss), or to do off-line reprocessing. + * + * CAMERA_DEVICE_API_VERSION_3_3: + * The typical use cases are OPAQUE (typically ZSL) and YUV reprocessing, + * see S8.2, S8.3 and S10 for more details. + */ + CAMERA3_STREAM_INPUT = 1, + + /** + * This stream can be used for input and output. Typically, the stream is + * used as an output stream, but occasionally one already-filled buffer may + * be sent back to the HAL device for reprocessing. + * + * This kind of stream is meant generally for Zero Shutter Lag (ZSL) + * features, where copying the captured image from the output buffer to the + * reprocessing input buffer would be expensive. See S8.1 for more details. + * + * Note that the HAL will always be reprocessing data it produced. + * + */ + CAMERA3_STREAM_BIDIRECTIONAL = 2, + + /** + * Total number of framework-defined stream types + */ + CAMERA3_NUM_STREAM_TYPES + +} camera3_stream_type_t; + +/** + * camera3_stream_rotation_t: + * + * The required counterclockwise rotation of camera stream. + */ +typedef enum camera3_stream_rotation { + /* No rotation */ + CAMERA3_STREAM_ROTATION_0 = 0, + + /* Rotate by 90 degree counterclockwise */ + CAMERA3_STREAM_ROTATION_90 = 1, + + /* Rotate by 180 degree counterclockwise */ + CAMERA3_STREAM_ROTATION_180 = 2, + + /* Rotate by 270 degree counterclockwise */ + CAMERA3_STREAM_ROTATION_270 = 3 +} camera3_stream_rotation_t; + +/** + * camera3_stream_configuration_mode_t: + * + * This defines the general operation mode for the HAL (for a given stream configuration), where + * modes besides NORMAL have different semantics, and usually limit the generality of the API in + * exchange for higher performance in some particular area. + */ +typedef enum camera3_stream_configuration_mode { + /** + * Normal stream configuration operation mode. This is the default camera operation mode, + * where all semantics of HAL APIs and metadata controls apply. + */ + CAMERA3_STREAM_CONFIGURATION_NORMAL_MODE = 0, + + /** + * Special constrained high speed operation mode for devices that can not support high + * speed output in NORMAL mode. All streams in this configuration are operating at high speed + * mode and have different characteristics and limitations to achieve high speed output. + * The NORMAL mode can still be used for high speed output if the HAL can support high speed + * output while satisfying all the semantics of HAL APIs and metadata controls. It is + * recommended for the HAL to support high speed output in NORMAL mode (by advertising the high + * speed FPS ranges in android.control.aeAvailableTargetFpsRanges) if possible. + * + * This mode has below limitations/requirements: + * + * 1. The HAL must support up to 2 streams with sizes reported by + * android.control.availableHighSpeedVideoConfigurations. + * 2. In this mode, the HAL is expected to output up to 120fps or higher. This mode must + * support the targeted FPS range and size configurations reported by + * android.control.availableHighSpeedVideoConfigurations. + * 3. The HAL must support HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED output stream format. + * 4. To achieve efficient high speed streaming, the HAL may have to aggregate + * multiple frames together and send to camera device for processing where the request + * controls are same for all the frames in this batch (batch mode). The HAL must support + * max batch size and the max batch size requirements defined by + * android.control.availableHighSpeedVideoConfigurations. + * 5. In this mode, the HAL must override aeMode, awbMode, and afMode to ON, ON, and + * CONTINUOUS_VIDEO, respectively. All post-processing block mode controls must be + * overridden to be FAST. Therefore, no manual control of capture and post-processing + * parameters is possible. All other controls operate the same as when + * android.control.mode == AUTO. This means that all other android.control.* fields + * must continue to work, such as + * + * android.control.aeTargetFpsRange + * android.control.aeExposureCompensation + * android.control.aeLock + * android.control.awbLock + * android.control.effectMode + * android.control.aeRegions + * android.control.afRegions + * android.control.awbRegions + * android.control.afTrigger + * android.control.aePrecaptureTrigger + * + * Outside of android.control.*, the following controls must work: + * + * android.flash.mode (TORCH mode only, automatic flash for still capture will not work + * since aeMode is ON) + * android.lens.opticalStabilizationMode (if it is supported) + * android.scaler.cropRegion + * android.statistics.faceDetectMode (if it is supported) + * + * For more details about high speed stream requirements, see + * android.control.availableHighSpeedVideoConfigurations and CONSTRAINED_HIGH_SPEED_VIDEO + * capability defined in android.request.availableCapabilities. + * + * This mode only needs to be supported by HALs that include CONSTRAINED_HIGH_SPEED_VIDEO in + * the android.request.availableCapabilities static metadata. + */ + CAMERA3_STREAM_CONFIGURATION_CONSTRAINED_HIGH_SPEED_MODE = 1, + + /** + * First value for vendor-defined stream configuration modes. + */ + CAMERA3_VENDOR_STREAM_CONFIGURATION_MODE_START = 0x8000 +} camera3_stream_configuration_mode_t; + +/** + * camera3_stream_t: + * + * A handle to a single camera input or output stream. A stream is defined by + * the framework by its buffer resolution and format, and additionally by the + * HAL with the gralloc usage flags and the maximum in-flight buffer count. + * + * The stream structures are owned by the framework, but pointers to a + * camera3_stream passed into the HAL by configure_streams() are valid until the + * end of the first subsequent configure_streams() call that _does not_ include + * that camera3_stream as an argument, or until the end of the close() call. + * + * All camera3_stream framework-controlled members are immutable once the + * camera3_stream is passed into configure_streams(). The HAL may only change + * the HAL-controlled parameters during a configure_streams() call, except for + * the contents of the private pointer. + * + * If a configure_streams() call returns a non-fatal error, all active streams + * remain valid as if configure_streams() had not been called. + * + * The endpoint of the stream is not visible to the camera HAL device. + * In DEVICE_API_VERSION_3_1, this was changed to share consumer usage flags + * on streams where the camera is a producer (OUTPUT and BIDIRECTIONAL stream + * types) see the usage field below. + */ +typedef struct camera3_stream { + + /***** + * Set by framework before configure_streams() + */ + + /** + * The type of the stream, one of the camera3_stream_type_t values. + */ + int stream_type; + + /** + * The width in pixels of the buffers in this stream + */ + uint32_t width; + + /** + * The height in pixels of the buffers in this stream + */ + uint32_t height; + + /** + * The pixel format for the buffers in this stream. Format is a value from + * the HAL_PIXEL_FORMAT_* list in system/core/include/system/graphics.h, or + * from device-specific headers. + * + * If HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED is used, then the platform + * gralloc module will select a format based on the usage flags provided by + * the camera device and the other endpoint of the stream. + * + * <= CAMERA_DEVICE_API_VERSION_3_1: + * + * The camera HAL device must inspect the buffers handed to it in the + * subsequent register_stream_buffers() call to obtain the + * implementation-specific format details, if necessary. + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * register_stream_buffers() won't be called by the framework, so the HAL + * should configure the ISP and sensor pipeline based purely on the sizes, + * usage flags, and formats for the configured streams. + */ + int format; + + /***** + * Set by HAL during configure_streams(). + */ + + /** + * The gralloc usage flags for this stream, as needed by the HAL. The usage + * flags are defined in gralloc.h (GRALLOC_USAGE_*), or in device-specific + * headers. + * + * For output streams, these are the HAL's producer usage flags. For input + * streams, these are the HAL's consumer usage flags. The usage flags from + * the producer and the consumer will be combined together and then passed + * to the platform gralloc HAL module for allocating the gralloc buffers for + * each stream. + * + * Version information: + * + * == CAMERA_DEVICE_API_VERSION_3_0: + * + * No initial value guaranteed when passed via configure_streams(). + * HAL may not use this field as input, and must write over this field + * with its usage flags. + * + * >= CAMERA_DEVICE_API_VERSION_3_1: + * + * For stream_type OUTPUT and BIDIRECTIONAL, when passed via + * configure_streams(), the initial value of this is the consumer's + * usage flags. The HAL may use these consumer flags to decide stream + * configuration. + * For stream_type INPUT, when passed via configure_streams(), the initial + * value of this is 0. + * For all streams passed via configure_streams(), the HAL must write + * over this field with its usage flags. + */ + uint32_t usage; + + /** + * The maximum number of buffers the HAL device may need to have dequeued at + * the same time. The HAL device may not have more buffers in-flight from + * this stream than this value. + */ + uint32_t max_buffers; + + /** + * A handle to HAL-private information for the stream. Will not be inspected + * by the framework code. + */ + void *priv; + + /** + * A field that describes the contents of the buffer. The format and buffer + * dimensions define the memory layout and structure of the stream buffers, + * while dataSpace defines the meaning of the data within the buffer. + * + * For most formats, dataSpace defines the color space of the image data. + * In addition, for some formats, dataSpace indicates whether image- or + * depth-based data is requested. See system/core/include/system/graphics.h + * for details of formats and valid dataSpace values for each format. + * + * Version information: + * + * < CAMERA_DEVICE_API_VERSION_3_3: + * + * Not defined and should not be accessed. dataSpace should be assumed to + * be HAL_DATASPACE_UNKNOWN, and the appropriate color space, etc, should + * be determined from the usage flags and the format. + * + * >= CAMERA_DEVICE_API_VERSION_3_3: + * + * Always set by the camera service. HAL must use this dataSpace to + * configure the stream to the correct colorspace, or to select between + * color and depth outputs if supported. + */ + android_dataspace_t data_space; + + /** + * The required output rotation of the stream, one of + * the camera3_stream_rotation_t values. This must be inspected by HAL along + * with stream width and height. For example, if the rotation is 90 degree + * and the stream width and height is 720 and 1280 respectively, camera service + * will supply buffers of size 720x1280, and HAL should capture a 1280x720 image + * and rotate the image by 90 degree counterclockwise. The rotation field is + * no-op when the stream type is input. Camera HAL must ignore the rotation + * field for an input stream. + * + * <= CAMERA_DEVICE_API_VERSION_3_2: + * + * Not defined and must not be accessed. HAL must not apply any rotation + * on output images. + * + * >= CAMERA_DEVICE_API_VERSION_3_3: + * + * Always set by camera service. HAL must inspect this field during stream + * configuration and returns -EINVAL if HAL cannot perform such rotation. + * HAL must always support CAMERA3_STREAM_ROTATION_0, so a + * configure_streams() call must not fail for unsupported rotation if + * rotation field of all streams is CAMERA3_STREAM_ROTATION_0. + * + */ + int rotation; + + /** + * This should be one of the camera3_stream_rotation_t values except for + * CAMERA3_STREAM_ROTATION_180. + * When setting to CAMERA3_STREAM_ROTATION_90 or CAMERA3_STREAM_ROTATION_270, HAL would crop, + * rotate the frame by the specified degrees clockwise and scale it up to original size. + * In Chrome OS, it's possible to have a portrait activity run in a landscape screen with + * landscape-mounted camera. The activity would show stretched or rotated preview because it + * does not expect to receive landscape preview frames. To solve this problem, we ask HAL to + * crop, rotate and scale the frames and modify CameraCharacteristics.SENSOR_ORIENTATION + * accordingly to imitate a portrait camera. + * Setting it to CAMERA3_STREAM_ROTATION_0 means no crop-rotate-scale would be performed. + * |cros_rotate_scale_degrees| in all camera3_stream_t of a configure_streams() call must be + * identical. The HAL should return -EINVAL if the degrees are not the same for all the streams. + */ + int crop_rotate_scale_degrees; + + /* reserved for future use */ + void *reserved[6]; + +} camera3_stream_t; + +/** + * camera3_stream_configuration_t: + * + * A structure of stream definitions, used by configure_streams(). This + * structure defines all the output streams and the reprocessing input + * stream for the current camera use case. + */ +typedef struct camera3_stream_configuration { + /** + * The total number of streams requested by the framework. This includes + * both input and output streams. The number of streams will be at least 1, + * and there will be at least one output-capable stream. + */ + uint32_t num_streams; + + /** + * An array of camera stream pointers, defining the input/output + * configuration for the camera HAL device. + * + * At most one input-capable stream may be defined (INPUT or BIDIRECTIONAL) + * in a single configuration. + * + * At least one output-capable stream must be defined (OUTPUT or + * BIDIRECTIONAL). + */ + camera3_stream_t **streams; + + /** + * >= CAMERA_DEVICE_API_VERSION_3_3: + * + * The operation mode of streams in this configuration, one of the value defined in + * camera3_stream_configuration_mode_t. + * The HAL can use this mode as an indicator to set the stream property (e.g., + * camera3_stream->max_buffers) appropriately. For example, if the configuration is + * CAMERA3_STREAM_CONFIGURATION_CONSTRAINED_HIGH_SPEED_MODE, the HAL may want to set aside more + * buffers for batch mode operation (see android.control.availableHighSpeedVideoConfigurations + * for batch mode definition). + * + */ + uint32_t operation_mode; +} camera3_stream_configuration_t; + +/** + * camera3_buffer_status_t: + * + * The current status of a single stream buffer. + */ +typedef enum camera3_buffer_status { + /** + * The buffer is in a normal state, and can be used after waiting on its + * sync fence. + */ + CAMERA3_BUFFER_STATUS_OK = 0, + + /** + * The buffer does not contain valid data, and the data in it should not be + * used. The sync fence must still be waited on before reusing the buffer. + */ + CAMERA3_BUFFER_STATUS_ERROR = 1 + +} camera3_buffer_status_t; + +/** + * camera3_stream_buffer_t: + * + * A single buffer from a camera3 stream. It includes a handle to its parent + * stream, the handle to the gralloc buffer itself, and sync fences + * + * The buffer does not specify whether it is to be used for input or output; + * that is determined by its parent stream type and how the buffer is passed to + * the HAL device. + */ +typedef struct camera3_stream_buffer { + /** + * The handle of the stream this buffer is associated with + */ + camera3_stream_t *stream; + + /** + * The native handle to the buffer + */ + buffer_handle_t *buffer; + + /** + * Current state of the buffer, one of the camera3_buffer_status_t + * values. The framework will not pass buffers to the HAL that are in an + * error state. In case a buffer could not be filled by the HAL, it must + * have its status set to CAMERA3_BUFFER_STATUS_ERROR when returned to the + * framework with process_capture_result(). + */ + int status; + + /** + * The acquire sync fence for this buffer. The HAL must wait on this fence + * fd before attempting to read from or write to this buffer. + * + * The framework may be set to -1 to indicate that no waiting is necessary + * for this buffer. + * + * When the HAL returns an output buffer to the framework with + * process_capture_result(), the acquire_fence must be set to -1. If the HAL + * never waits on the acquire_fence due to an error in filling a buffer, + * when calling process_capture_result() the HAL must set the release_fence + * of the buffer to be the acquire_fence passed to it by the framework. This + * will allow the framework to wait on the fence before reusing the buffer. + * + * For input buffers, the HAL must not change the acquire_fence field during + * the process_capture_request() call. + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * When the HAL returns an input buffer to the framework with + * process_capture_result(), the acquire_fence must be set to -1. If the HAL + * never waits on input buffer acquire fence due to an error, the sync + * fences should be handled similarly to the way they are handled for output + * buffers. + */ + int acquire_fence; + + /** + * The release sync fence for this buffer. The HAL must set this fence when + * returning buffers to the framework, or write -1 to indicate that no + * waiting is required for this buffer. + * + * For the output buffers, the fences must be set in the output_buffers + * array passed to process_capture_result(). + * + * <= CAMERA_DEVICE_API_VERSION_3_1: + * + * For the input buffer, the release fence must be set by the + * process_capture_request() call. + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * For the input buffer, the fences must be set in the input_buffer + * passed to process_capture_result(). + * + * After signaling the release_fence for this buffer, the HAL + * should not make any further attempts to access this buffer as the + * ownership has been fully transferred back to the framework. + * + * If a fence of -1 was specified then the ownership of this buffer + * is transferred back immediately upon the call of process_capture_result. + */ + int release_fence; + +} camera3_stream_buffer_t; + +/** + * camera3_stream_buffer_set_t: + * + * The complete set of gralloc buffers for a stream. This structure is given to + * register_stream_buffers() to allow the camera HAL device to register/map/etc + * newly allocated stream buffers. + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * Deprecated (and not used). In particular, + * register_stream_buffers is also deprecated and will never be invoked. + * + */ +typedef struct camera3_stream_buffer_set { + /** + * The stream handle for the stream these buffers belong to + */ + camera3_stream_t *stream; + + /** + * The number of buffers in this stream. It is guaranteed to be at least + * stream->max_buffers. + */ + uint32_t num_buffers; + + /** + * The array of gralloc buffer handles for this stream. If the stream format + * is set to HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED, the camera HAL device + * should inspect the passed-in buffers to determine any platform-private + * pixel format information. + */ + buffer_handle_t **buffers; + +} camera3_stream_buffer_set_t; + +/** + * camera3_jpeg_blob: + * + * Transport header for compressed JPEG buffers in output streams. + * + * To capture JPEG images, a stream is created using the pixel format + * HAL_PIXEL_FORMAT_BLOB. The buffer size for the stream is calculated by the + * framework, based on the static metadata field android.jpeg.maxSize. Since + * compressed JPEG images are of variable size, the HAL needs to include the + * final size of the compressed image using this structure inside the output + * stream buffer. The JPEG blob ID field must be set to CAMERA3_JPEG_BLOB_ID. + * + * Transport header should be at the end of the JPEG output stream buffer. That + * means the jpeg_blob_id must start at byte[buffer_size - + * sizeof(camera3_jpeg_blob)], where the buffer_size is the size of gralloc buffer. + * Any HAL using this transport header must account for it in android.jpeg.maxSize + * The JPEG data itself starts at the beginning of the buffer and should be + * jpeg_size bytes long. + */ +typedef struct camera3_jpeg_blob { + uint16_t jpeg_blob_id; + uint32_t jpeg_size; +} camera3_jpeg_blob_t; + +enum { + CAMERA3_JPEG_BLOB_ID = 0x00FF +}; + +/********************************************************************** + * + * Message definitions for the HAL notify() callback. + * + * These definitions are used for the HAL notify callback, to signal + * asynchronous events from the HAL device to the Android framework. + * + */ + +/** + * camera3_msg_type: + * + * Indicates the type of message sent, which specifies which member of the + * message union is valid. + * + */ +typedef enum camera3_msg_type { + /** + * An error has occurred. camera3_notify_msg.message.error contains the + * error information. + */ + CAMERA3_MSG_ERROR = 1, + + /** + * The exposure of a given request or processing a reprocess request has + * begun. camera3_notify_msg.message.shutter contains the information + * the capture. + */ + CAMERA3_MSG_SHUTTER = 2, + + /** + * Number of framework message types + */ + CAMERA3_NUM_MESSAGES + +} camera3_msg_type_t; + +/** + * Defined error codes for CAMERA_MSG_ERROR + */ +typedef enum camera3_error_msg_code { + /** + * A serious failure occured. No further frames or buffer streams will + * be produced by the device. Device should be treated as closed. The + * client must reopen the device to use it again. The frame_number field + * is unused. + */ + CAMERA3_MSG_ERROR_DEVICE = 1, + + /** + * An error has occurred in processing a request. No output (metadata or + * buffers) will be produced for this request. The frame_number field + * specifies which request has been dropped. Subsequent requests are + * unaffected, and the device remains operational. + */ + CAMERA3_MSG_ERROR_REQUEST = 2, + + /** + * An error has occurred in producing an output result metadata buffer + * for a request, but output stream buffers for it will still be + * available. Subsequent requests are unaffected, and the device remains + * operational. The frame_number field specifies the request for which + * result metadata won't be available. + */ + CAMERA3_MSG_ERROR_RESULT = 3, + + /** + * An error has occurred in placing an output buffer into a stream for a + * request. The frame metadata and other buffers may still be + * available. Subsequent requests are unaffected, and the device remains + * operational. The frame_number field specifies the request for which the + * buffer was dropped, and error_stream contains a pointer to the stream + * that dropped the frame.u + */ + CAMERA3_MSG_ERROR_BUFFER = 4, + + /** + * Number of error types + */ + CAMERA3_MSG_NUM_ERRORS + +} camera3_error_msg_code_t; + +/** + * camera3_error_msg_t: + * + * Message contents for CAMERA3_MSG_ERROR + */ +typedef struct camera3_error_msg { + /** + * Frame number of the request the error applies to. 0 if the frame number + * isn't applicable to the error. + */ + uint32_t frame_number; + + /** + * Pointer to the stream that had a failure. NULL if the stream isn't + * applicable to the error. + */ + camera3_stream_t *error_stream; + + /** + * The code for this error; one of the CAMERA_MSG_ERROR enum values. + */ + int error_code; + +} camera3_error_msg_t; + +/** + * camera3_shutter_msg_t: + * + * Message contents for CAMERA3_MSG_SHUTTER + */ +typedef struct camera3_shutter_msg { + /** + * Frame number of the request that has begun exposure or reprocessing. + */ + uint32_t frame_number; + + /** + * Timestamp for the start of capture. For a reprocess request, this must + * be input image's start of capture. This must match the capture result + * metadata's sensor exposure start timestamp. + */ + uint64_t timestamp; + +} camera3_shutter_msg_t; + +/** + * camera3_notify_msg_t: + * + * The message structure sent to camera3_callback_ops_t.notify() + */ +typedef struct camera3_notify_msg { + + /** + * The message type. One of camera3_notify_msg_type, or a private extension. + */ + int type; + + union { + /** + * Error message contents. Valid if type is CAMERA3_MSG_ERROR + */ + camera3_error_msg_t error; + + /** + * Shutter message contents. Valid if type is CAMERA3_MSG_SHUTTER + */ + camera3_shutter_msg_t shutter; + + /** + * Generic message contents. Used to ensure a minimum size for custom + * message types. + */ + uint8_t generic[32]; + } message; + +} camera3_notify_msg_t; + +/********************************************************************** + * + * Capture request/result definitions for the HAL process_capture_request() + * method, and the process_capture_result() callback. + * + */ + +/** + * camera3_request_template_t: + * + * Available template types for + * camera3_device_ops.construct_default_request_settings() + */ +typedef enum camera3_request_template { + /** + * Standard camera preview operation with 3A on auto. + */ + CAMERA3_TEMPLATE_PREVIEW = 1, + + /** + * Standard camera high-quality still capture with 3A and flash on auto. + */ + CAMERA3_TEMPLATE_STILL_CAPTURE = 2, + + /** + * Standard video recording plus preview with 3A on auto, torch off. + */ + CAMERA3_TEMPLATE_VIDEO_RECORD = 3, + + /** + * High-quality still capture while recording video. Application will + * include preview, video record, and full-resolution YUV or JPEG streams in + * request. Must not cause stuttering on video stream. 3A on auto. + */ + CAMERA3_TEMPLATE_VIDEO_SNAPSHOT = 4, + + /** + * Zero-shutter-lag mode. Application will request preview and + * full-resolution data for each frame, and reprocess it to JPEG when a + * still image is requested by user. Settings should provide highest-quality + * full-resolution images without compromising preview frame rate. 3A on + * auto. + */ + CAMERA3_TEMPLATE_ZERO_SHUTTER_LAG = 5, + + /** + * A basic template for direct application control of capture + * parameters. All automatic control is disabled (auto-exposure, auto-white + * balance, auto-focus), and post-processing parameters are set to preview + * quality. The manual capture parameters (exposure, sensitivity, etc.) + * are set to reasonable defaults, but should be overridden by the + * application depending on the intended use case. + */ + CAMERA3_TEMPLATE_MANUAL = 6, + + /* Total number of templates */ + CAMERA3_TEMPLATE_COUNT, + + /** + * First value for vendor-defined request templates + */ + CAMERA3_VENDOR_TEMPLATE_START = 0x40000000 + +} camera3_request_template_t; + +/** + * camera3_capture_request_t: + * + * A single request for image capture/buffer reprocessing, sent to the Camera + * HAL device by the framework in process_capture_request(). + * + * The request contains the settings to be used for this capture, and the set of + * output buffers to write the resulting image data in. It may optionally + * contain an input buffer, in which case the request is for reprocessing that + * input buffer instead of capturing a new image with the camera sensor. The + * capture is identified by the frame_number. + * + * In response, the camera HAL device must send a camera3_capture_result + * structure asynchronously to the framework, using the process_capture_result() + * callback. + */ +typedef struct camera3_capture_request { + /** + * The frame number is an incrementing integer set by the framework to + * uniquely identify this capture. It needs to be returned in the result + * call, and is also used to identify the request in asynchronous + * notifications sent to camera3_callback_ops_t.notify(). + */ + uint32_t frame_number; + + /** + * The settings buffer contains the capture and processing parameters for + * the request. As a special case, a NULL settings buffer indicates that the + * settings are identical to the most-recently submitted capture request. A + * NULL buffer cannot be used as the first submitted request after a + * configure_streams() call. + */ + const camera_metadata_t *settings; + + /** + * The input stream buffer to use for this request, if any. + * + * If input_buffer is NULL, then the request is for a new capture from the + * imager. If input_buffer is valid, the request is for reprocessing the + * image contained in input_buffer. + * + * In the latter case, the HAL must set the release_fence of the + * input_buffer to a valid sync fence, or to -1 if the HAL does not support + * sync, before process_capture_request() returns. + * + * The HAL is required to wait on the acquire sync fence of the input buffer + * before accessing it. + * + * <= CAMERA_DEVICE_API_VERSION_3_1: + * + * Any input buffer included here will have been registered with the HAL + * through register_stream_buffers() before its inclusion in a request. + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * The buffers will not have been pre-registered with the HAL. + * Subsequent requests may reuse buffers, or provide entirely new buffers. + */ + camera3_stream_buffer_t *input_buffer; + + /** + * The number of output buffers for this capture request. Must be at least + * 1. + */ + uint32_t num_output_buffers; + + /** + * An array of num_output_buffers stream buffers, to be filled with image + * data from this capture/reprocess. The HAL must wait on the acquire fences + * of each stream buffer before writing to them. + * + * The HAL takes ownership of the actual buffer_handle_t entries in + * output_buffers; the framework does not access them until they are + * returned in a camera3_capture_result_t. + * + * <= CAMERA_DEVICE_API_VERSION_3_1: + * + * All the buffers included here will have been registered with the HAL + * through register_stream_buffers() before their inclusion in a request. + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * Any or all of the buffers included here may be brand new in this + * request (having never before seen by the HAL). + */ + const camera3_stream_buffer_t *output_buffers; + +} camera3_capture_request_t; + +/** + * camera3_capture_result_t: + * + * The result of a single capture/reprocess by the camera HAL device. This is + * sent to the framework asynchronously with process_capture_result(), in + * response to a single capture request sent to the HAL with + * process_capture_request(). Multiple process_capture_result() calls may be + * performed by the HAL for each request. + * + * Each call, all with the same frame + * number, may contain some subset of the output buffers, and/or the result + * metadata. The metadata may only be provided once for a given frame number; + * all other calls must set the result metadata to NULL. + * + * The result structure contains the output metadata from this capture, and the + * set of output buffers that have been/will be filled for this capture. Each + * output buffer may come with a release sync fence that the framework will wait + * on before reading, in case the buffer has not yet been filled by the HAL. + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * The metadata may be provided multiple times for a single frame number. The + * framework will accumulate together the final result set by combining each + * partial result together into the total result set. + * + * If an input buffer is given in a request, the HAL must return it in one of + * the process_capture_result calls, and the call may be to just return the input + * buffer, without metadata and output buffers; the sync fences must be handled + * the same way they are done for output buffers. + * + * + * Performance considerations: + * + * Applications will also receive these partial results immediately, so sending + * partial results is a highly recommended performance optimization to avoid + * the total pipeline latency before sending the results for what is known very + * early on in the pipeline. + * + * A typical use case might be calculating the AF state halfway through the + * pipeline; by sending the state back to the framework immediately, we get a + * 50% performance increase and perceived responsiveness of the auto-focus. + * + */ +typedef struct camera3_capture_result { + /** + * The frame number is an incrementing integer set by the framework in the + * submitted request to uniquely identify this capture. It is also used to + * identify the request in asynchronous notifications sent to + * camera3_callback_ops_t.notify(). + */ + uint32_t frame_number; + + /** + * The result metadata for this capture. This contains information about the + * final capture parameters, the state of the capture and post-processing + * hardware, the state of the 3A algorithms, if enabled, and the output of + * any enabled statistics units. + * + * Only one call to process_capture_result() with a given frame_number may + * include the result metadata. All other calls for the same frame_number + * must set this to NULL. + * + * If there was an error producing the result metadata, result must be an + * empty metadata buffer, and notify() must be called with ERROR_RESULT. + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * Multiple calls to process_capture_result() with a given frame_number + * may include the result metadata. + * + * Partial metadata submitted should not include any metadata key returned + * in a previous partial result for a given frame. Each new partial result + * for that frame must also set a distinct partial_result value. + * + * If notify has been called with ERROR_RESULT, all further partial + * results for that frame are ignored by the framework. + */ + const camera_metadata_t *result; + + /** + * The number of output buffers returned in this result structure. Must be + * less than or equal to the matching capture request's count. If this is + * less than the buffer count in the capture request, at least one more call + * to process_capture_result with the same frame_number must be made, to + * return the remaining output buffers to the framework. This may only be + * zero if the structure includes valid result metadata or an input buffer + * is returned in this result. + */ + uint32_t num_output_buffers; + + /** + * The handles for the output stream buffers for this capture. They may not + * yet be filled at the time the HAL calls process_capture_result(); the + * framework will wait on the release sync fences provided by the HAL before + * reading the buffers. + * + * The HAL must set the stream buffer's release sync fence to a valid sync + * fd, or to -1 if the buffer has already been filled. + * + * If the HAL encounters an error while processing the buffer, and the + * buffer is not filled, the buffer's status field must be set to + * CAMERA3_BUFFER_STATUS_ERROR. If the HAL did not wait on the acquire fence + * before encountering the error, the acquire fence should be copied into + * the release fence, to allow the framework to wait on the fence before + * reusing the buffer. + * + * The acquire fence must be set to -1 for all output buffers. If + * num_output_buffers is zero, this may be NULL. In that case, at least one + * more process_capture_result call must be made by the HAL to provide the + * output buffers. + * + * When process_capture_result is called with a new buffer for a frame, + * all previous frames' buffers for that corresponding stream must have been + * already delivered (the fences need not have yet been signaled). + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * Gralloc buffers for a frame may be sent to framework before the + * corresponding SHUTTER-notify. + * + * Performance considerations: + * + * Buffers delivered to the framework will not be dispatched to the + * application layer until a start of exposure timestamp has been received + * via a SHUTTER notify() call. It is highly recommended to + * dispatch that call as early as possible. + */ + const camera3_stream_buffer_t *output_buffers; + + /** + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * The handle for the input stream buffer for this capture. It may not + * yet be consumed at the time the HAL calls process_capture_result(); the + * framework will wait on the release sync fences provided by the HAL before + * reusing the buffer. + * + * The HAL should handle the sync fences the same way they are done for + * output_buffers. + * + * Only one input buffer is allowed to be sent per request. Similarly to + * output buffers, the ordering of returned input buffers must be + * maintained by the HAL. + * + * Performance considerations: + * + * The input buffer should be returned as early as possible. If the HAL + * supports sync fences, it can call process_capture_result to hand it back + * with sync fences being set appropriately. If the sync fences are not + * supported, the buffer can only be returned when it is consumed, which + * may take long time; the HAL may choose to copy this input buffer to make + * the buffer return sooner. + */ + const camera3_stream_buffer_t *input_buffer; + + /** + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * In order to take advantage of partial results, the HAL must set the + * static metadata android.request.partialResultCount to the number of + * partial results it will send for each frame. + * + * Each new capture result with a partial result must set + * this field (partial_result) to a distinct inclusive value between + * 1 and android.request.partialResultCount. + * + * HALs not wishing to take advantage of this feature must not + * set an android.request.partialResultCount or partial_result to a value + * other than 1. + * + * This value must be set to 0 when a capture result contains buffers only + * and no metadata. + */ + uint32_t partial_result; + +} camera3_capture_result_t; + +/********************************************************************** + * + * Callback methods for the HAL to call into the framework. + * + * These methods are used to return metadata and image buffers for a completed + * or failed captures, and to notify the framework of asynchronous events such + * as errors. + * + * The framework will not call back into the HAL from within these callbacks, + * and these calls will not block for extended periods. + * + */ +typedef struct camera3_callback_ops { + + /** + * process_capture_result: + * + * Send results from a completed capture to the framework. + * process_capture_result() may be invoked multiple times by the HAL in + * response to a single capture request. This allows, for example, the + * metadata and low-resolution buffers to be returned in one call, and + * post-processed JPEG buffers in a later call, once it is available. Each + * call must include the frame number of the request it is returning + * metadata or buffers for. + * + * A component (buffer or metadata) of the complete result may only be + * included in one process_capture_result call. A buffer for each stream, + * and the result metadata, must be returned by the HAL for each request in + * one of the process_capture_result calls, even in case of errors producing + * some of the output. A call to process_capture_result() with neither + * output buffers or result metadata is not allowed. + * + * The order of returning metadata and buffers for a single result does not + * matter, but buffers for a given stream must be returned in FIFO order. So + * the buffer for request 5 for stream A must always be returned before the + * buffer for request 6 for stream A. This also applies to the result + * metadata; the metadata for request 5 must be returned before the metadata + * for request 6. + * + * However, different streams are independent of each other, so it is + * acceptable and expected that the buffer for request 5 for stream A may be + * returned after the buffer for request 6 for stream B is. And it is + * acceptable that the result metadata for request 6 for stream B is + * returned before the buffer for request 5 for stream A is. + * + * The HAL retains ownership of result structure, which only needs to be + * valid to access during this call. The framework will copy whatever it + * needs before this call returns. + * + * The output buffers do not need to be filled yet; the framework will wait + * on the stream buffer release sync fence before reading the buffer + * data. Therefore, this method should be called by the HAL as soon as + * possible, even if some or all of the output buffers are still in + * being filled. The HAL must include valid release sync fences into each + * output_buffers stream buffer entry, or -1 if that stream buffer is + * already filled. + * + * If the result buffer cannot be constructed for a request, the HAL should + * return an empty metadata buffer, but still provide the output buffers and + * their sync fences. In addition, notify() must be called with an + * ERROR_RESULT message. + * + * If an output buffer cannot be filled, its status field must be set to + * STATUS_ERROR. In addition, notify() must be called with a ERROR_BUFFER + * message. + * + * If the entire capture has failed, then this method still needs to be + * called to return the output buffers to the framework. All the buffer + * statuses should be STATUS_ERROR, and the result metadata should be an + * empty buffer. In addition, notify() must be called with a ERROR_REQUEST + * message. In this case, individual ERROR_RESULT/ERROR_BUFFER messages + * should not be sent. + * + * Performance requirements: + * + * This is a non-blocking call. The framework will return this call in 5ms. + * + * The pipeline latency (see S7 for definition) should be less than or equal to + * 4 frame intervals, and must be less than or equal to 8 frame intervals. + * + */ + void (*process_capture_result)(const struct camera3_callback_ops *, + const camera3_capture_result_t *result); + + /** + * notify: + * + * Asynchronous notification callback from the HAL, fired for various + * reasons. Only for information independent of frame capture, or that + * require specific timing. The ownership of the message structure remains + * with the HAL, and the msg only needs to be valid for the duration of this + * call. + * + * Multiple threads may call notify() simultaneously. + * + * <= CAMERA_DEVICE_API_VERSION_3_1: + * + * The notification for the start of exposure for a given request must be + * sent by the HAL before the first call to process_capture_result() for + * that request is made. + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * Buffers delivered to the framework will not be dispatched to the + * application layer until a start of exposure timestamp (or input image's + * start of exposure timestamp for a reprocess request) has been received + * via a SHUTTER notify() call. It is highly recommended to dispatch this + * call as early as possible. + * + * ------------------------------------------------------------------------ + * Performance requirements: + * + * This is a non-blocking call. The framework will return this call in 5ms. + */ + void (*notify)(const struct camera3_callback_ops *, + const camera3_notify_msg_t *msg); + +} camera3_callback_ops_t; + +/********************************************************************** + * + * Camera device operations + * + */ +typedef struct camera3_device_ops { + + /** + * initialize: + * + * One-time initialization to pass framework callback function pointers to + * the HAL. Will be called once after a successful open() call, before any + * other functions are called on the camera3_device_ops structure. + * + * Performance requirements: + * + * This should be a non-blocking call. The HAL should return from this call + * in 5ms, and must return from this call in 10ms. + * + * Return values: + * + * 0: On successful initialization + * + * -ENODEV: If initialization fails. Only close() can be called successfully + * by the framework after this. + */ + int (*initialize)(const struct camera3_device *, + const camera3_callback_ops_t *callback_ops); + + /********************************************************************** + * Stream management + */ + + /** + * configure_streams: + * + * CAMERA_DEVICE_API_VERSION_3_0 only: + * + * Reset the HAL camera device processing pipeline and set up new input and + * output streams. This call replaces any existing stream configuration with + * the streams defined in the stream_list. This method will be called at + * least once after initialize() before a request is submitted with + * process_capture_request(). + * + * The stream_list must contain at least one output-capable stream, and may + * not contain more than one input-capable stream. + * + * The stream_list may contain streams that are also in the currently-active + * set of streams (from the previous call to configure_stream()). These + * streams will already have valid values for usage, max_buffers, and the + * private pointer. + * + * If such a stream has already had its buffers registered, + * register_stream_buffers() will not be called again for the stream, and + * buffers from the stream can be immediately included in input requests. + * + * If the HAL needs to change the stream configuration for an existing + * stream due to the new configuration, it may rewrite the values of usage + * and/or max_buffers during the configure call. + * + * The framework will detect such a change, and will then reallocate the + * stream buffers, and call register_stream_buffers() again before using + * buffers from that stream in a request. + * + * If a currently-active stream is not included in stream_list, the HAL may + * safely remove any references to that stream. It will not be reused in a + * later configure() call by the framework, and all the gralloc buffers for + * it will be freed after the configure_streams() call returns. + * + * The stream_list structure is owned by the framework, and may not be + * accessed once this call completes. The address of an individual + * camera3_stream_t structure will remain valid for access by the HAL until + * the end of the first configure_stream() call which no longer includes + * that camera3_stream_t in the stream_list argument. The HAL may not change + * values in the stream structure outside of the private pointer, except for + * the usage and max_buffers members during the configure_streams() call + * itself. + * + * If the stream is new, the usage, max_buffer, and private pointer fields + * of the stream structure will all be set to 0. The HAL device must set + * these fields before the configure_streams() call returns. These fields + * are then used by the framework and the platform gralloc module to + * allocate the gralloc buffers for each stream. + * + * Before such a new stream can have its buffers included in a capture + * request, the framework will call register_stream_buffers() with that + * stream. However, the framework is not required to register buffers for + * _all_ streams before submitting a request. This allows for quick startup + * of (for example) a preview stream, with allocation for other streams + * happening later or concurrently. + * + * ------------------------------------------------------------------------ + * CAMERA_DEVICE_API_VERSION_3_1 only: + * + * Reset the HAL camera device processing pipeline and set up new input and + * output streams. This call replaces any existing stream configuration with + * the streams defined in the stream_list. This method will be called at + * least once after initialize() before a request is submitted with + * process_capture_request(). + * + * The stream_list must contain at least one output-capable stream, and may + * not contain more than one input-capable stream. + * + * The stream_list may contain streams that are also in the currently-active + * set of streams (from the previous call to configure_stream()). These + * streams will already have valid values for usage, max_buffers, and the + * private pointer. + * + * If such a stream has already had its buffers registered, + * register_stream_buffers() will not be called again for the stream, and + * buffers from the stream can be immediately included in input requests. + * + * If the HAL needs to change the stream configuration for an existing + * stream due to the new configuration, it may rewrite the values of usage + * and/or max_buffers during the configure call. + * + * The framework will detect such a change, and will then reallocate the + * stream buffers, and call register_stream_buffers() again before using + * buffers from that stream in a request. + * + * If a currently-active stream is not included in stream_list, the HAL may + * safely remove any references to that stream. It will not be reused in a + * later configure() call by the framework, and all the gralloc buffers for + * it will be freed after the configure_streams() call returns. + * + * The stream_list structure is owned by the framework, and may not be + * accessed once this call completes. The address of an individual + * camera3_stream_t structure will remain valid for access by the HAL until + * the end of the first configure_stream() call which no longer includes + * that camera3_stream_t in the stream_list argument. The HAL may not change + * values in the stream structure outside of the private pointer, except for + * the usage and max_buffers members during the configure_streams() call + * itself. + * + * If the stream is new, max_buffer, and private pointer fields of the + * stream structure will all be set to 0. The usage will be set to the + * consumer usage flags. The HAL device must set these fields before the + * configure_streams() call returns. These fields are then used by the + * framework and the platform gralloc module to allocate the gralloc + * buffers for each stream. + * + * Before such a new stream can have its buffers included in a capture + * request, the framework will call register_stream_buffers() with that + * stream. However, the framework is not required to register buffers for + * _all_ streams before submitting a request. This allows for quick startup + * of (for example) a preview stream, with allocation for other streams + * happening later or concurrently. + * + * ------------------------------------------------------------------------ + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * Reset the HAL camera device processing pipeline and set up new input and + * output streams. This call replaces any existing stream configuration with + * the streams defined in the stream_list. This method will be called at + * least once after initialize() before a request is submitted with + * process_capture_request(). + * + * The stream_list must contain at least one output-capable stream, and may + * not contain more than one input-capable stream. + * + * The stream_list may contain streams that are also in the currently-active + * set of streams (from the previous call to configure_stream()). These + * streams will already have valid values for usage, max_buffers, and the + * private pointer. + * + * If the HAL needs to change the stream configuration for an existing + * stream due to the new configuration, it may rewrite the values of usage + * and/or max_buffers during the configure call. + * + * The framework will detect such a change, and may then reallocate the + * stream buffers before using buffers from that stream in a request. + * + * If a currently-active stream is not included in stream_list, the HAL may + * safely remove any references to that stream. It will not be reused in a + * later configure() call by the framework, and all the gralloc buffers for + * it will be freed after the configure_streams() call returns. + * + * The stream_list structure is owned by the framework, and may not be + * accessed once this call completes. The address of an individual + * camera3_stream_t structure will remain valid for access by the HAL until + * the end of the first configure_stream() call which no longer includes + * that camera3_stream_t in the stream_list argument. The HAL may not change + * values in the stream structure outside of the private pointer, except for + * the usage and max_buffers members during the configure_streams() call + * itself. + * + * If the stream is new, max_buffer, and private pointer fields of the + * stream structure will all be set to 0. The usage will be set to the + * consumer usage flags. The HAL device must set these fields before the + * configure_streams() call returns. These fields are then used by the + * framework and the platform gralloc module to allocate the gralloc + * buffers for each stream. + * + * Newly allocated buffers may be included in a capture request at any time + * by the framework. Once a gralloc buffer is returned to the framework + * with process_capture_result (and its respective release_fence has been + * signaled) the framework may free or reuse it at any time. + * + * ------------------------------------------------------------------------ + * + * Preconditions: + * + * The framework will only call this method when no captures are being + * processed. That is, all results have been returned to the framework, and + * all in-flight input and output buffers have been returned and their + * release sync fences have been signaled by the HAL. The framework will not + * submit new requests for capture while the configure_streams() call is + * underway. + * + * Postconditions: + * + * The HAL device must configure itself to provide maximum possible output + * frame rate given the sizes and formats of the output streams, as + * documented in the camera device's static metadata. + * + * Performance requirements: + * + * This call is expected to be heavyweight and possibly take several hundred + * milliseconds to complete, since it may require resetting and + * reconfiguring the image sensor and the camera processing pipeline. + * Nevertheless, the HAL device should attempt to minimize the + * reconfiguration delay to minimize the user-visible pauses during + * application operational mode changes (such as switching from still + * capture to video recording). + * + * The HAL should return from this call in 500ms, and must return from this + * call in 1000ms. + * + * Return values: + * + * 0: On successful stream configuration + * + * -EINVAL: If the requested stream configuration is invalid. Some examples + * of invalid stream configurations include: + * + * - Including more than 1 input-capable stream (INPUT or + * BIDIRECTIONAL) + * + * - Not including any output-capable streams (OUTPUT or + * BIDIRECTIONAL) + * + * - Including streams with unsupported formats, or an unsupported + * size for that format. + * + * - Including too many output streams of a certain format. + * + * - Unsupported rotation configuration (only applies to + * devices with version >= CAMERA_DEVICE_API_VERSION_3_3) + * + * - Stream sizes/formats don't satisfy the + * camera3_stream_configuration_t->operation_mode requirements for non-NORMAL mode, + * or the requested operation_mode is not supported by the HAL. + * (only applies to devices with version >= CAMERA_DEVICE_API_VERSION_3_3) + * + * Note that the framework submitting an invalid stream + * configuration is not normal operation, since stream + * configurations are checked before configure. An invalid + * configuration means that a bug exists in the framework code, or + * there is a mismatch between the HAL's static metadata and the + * requirements on streams. + * + * -ENODEV: If there has been a fatal error and the device is no longer + * operational. Only close() can be called successfully by the + * framework after this error is returned. + */ + int (*configure_streams)(const struct camera3_device *, + camera3_stream_configuration_t *stream_list); + + /** + * register_stream_buffers: + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * DEPRECATED. This will not be called and must be set to NULL. + * + * <= CAMERA_DEVICE_API_VERSION_3_1: + * + * Register buffers for a given stream with the HAL device. This method is + * called by the framework after a new stream is defined by + * configure_streams, and before buffers from that stream are included in a + * capture request. If the same stream is listed in a subsequent + * configure_streams() call, register_stream_buffers will _not_ be called + * again for that stream. + * + * The framework does not need to register buffers for all configured + * streams before it submits the first capture request. This allows quick + * startup for preview (or similar use cases) while other streams are still + * being allocated. + * + * This method is intended to allow the HAL device to map or otherwise + * prepare the buffers for later use. The buffers passed in will already be + * locked for use. At the end of the call, all the buffers must be ready to + * be returned to the stream. The buffer_set argument is only valid for the + * duration of this call. + * + * If the stream format was set to HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED, + * the camera HAL should inspect the passed-in buffers here to determine any + * platform-private pixel format information. + * + * Performance requirements: + * + * This should be a non-blocking call. The HAL should return from this call + * in 1ms, and must return from this call in 5ms. + * + * Return values: + * + * 0: On successful registration of the new stream buffers + * + * -EINVAL: If the stream_buffer_set does not refer to a valid active + * stream, or if the buffers array is invalid. + * + * -ENOMEM: If there was a failure in registering the buffers. The framework + * must consider all the stream buffers to be unregistered, and can + * try to register again later. + * + * -ENODEV: If there is a fatal error, and the device is no longer + * operational. Only close() can be called successfully by the + * framework after this error is returned. + */ + int (*register_stream_buffers)(const struct camera3_device *, + const camera3_stream_buffer_set_t *buffer_set); + + /********************************************************************** + * Request creation and submission + */ + + /** + * construct_default_request_settings: + * + * Create capture settings for standard camera use cases. + * + * The device must return a settings buffer that is configured to meet the + * requested use case, which must be one of the CAMERA3_TEMPLATE_* + * enums. All request control fields must be included. + * + * The HAL retains ownership of this structure, but the pointer to the + * structure must be valid until the device is closed. The framework and the + * HAL may not modify the buffer once it is returned by this call. The same + * buffer may be returned for subsequent calls for the same template, or for + * other templates. + * + * Performance requirements: + * + * This should be a non-blocking call. The HAL should return from this call + * in 1ms, and must return from this call in 5ms. + * + * Return values: + * + * Valid metadata: On successful creation of a default settings + * buffer. + * + * NULL: In case of a fatal error. After this is returned, only + * the close() method can be called successfully by the + * framework. + */ + const camera_metadata_t* (*construct_default_request_settings)( + const struct camera3_device *, + int type); + + /** + * process_capture_request: + * + * Send a new capture request to the HAL. The HAL should not return from + * this call until it is ready to accept the next request to process. Only + * one call to process_capture_request() will be made at a time by the + * framework, and the calls will all be from the same thread. The next call + * to process_capture_request() will be made as soon as a new request and + * its associated buffers are available. In a normal preview scenario, this + * means the function will be called again by the framework almost + * instantly. + * + * The actual request processing is asynchronous, with the results of + * capture being returned by the HAL through the process_capture_result() + * call. This call requires the result metadata to be available, but output + * buffers may simply provide sync fences to wait on. Multiple requests are + * expected to be in flight at once, to maintain full output frame rate. + * + * The framework retains ownership of the request structure. It is only + * guaranteed to be valid during this call. The HAL device must make copies + * of the information it needs to retain for the capture processing. The HAL + * is responsible for waiting on and closing the buffers' fences and + * returning the buffer handles to the framework. + * + * The HAL must write the file descriptor for the input buffer's release + * sync fence into input_buffer->release_fence, if input_buffer is not + * NULL. If the HAL returns -1 for the input buffer release sync fence, the + * framework is free to immediately reuse the input buffer. Otherwise, the + * framework will wait on the sync fence before refilling and reusing the + * input buffer. + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * + * The input/output buffers provided by the framework in each request + * may be brand new (having never before seen by the HAL). + * + * ------------------------------------------------------------------------ + * Performance considerations: + * + * Handling a new buffer should be extremely lightweight and there should be + * no frame rate degradation or frame jitter introduced. + * + * This call must return fast enough to ensure that the requested frame + * rate can be sustained, especially for streaming cases (post-processing + * quality settings set to FAST). The HAL should return this call in 1 + * frame interval, and must return from this call in 4 frame intervals. + * + * Return values: + * + * 0: On a successful start to processing the capture request + * + * -EINVAL: If the input is malformed (the settings are NULL when not + * allowed, there are 0 output buffers, etc) and capture processing + * cannot start. Failures during request processing should be + * handled by calling camera3_callback_ops_t.notify(). In case of + * this error, the framework will retain responsibility for the + * stream buffers' fences and the buffer handles; the HAL should + * not close the fences or return these buffers with + * process_capture_result. + * + * -ENODEV: If the camera device has encountered a serious error. After this + * error is returned, only the close() method can be successfully + * called by the framework. + * + */ + int (*process_capture_request)(const struct camera3_device *, + camera3_capture_request_t *request); + + /********************************************************************** + * Miscellaneous methods + */ + + /** + * get_metadata_vendor_tag_ops: + * + * Get methods to query for vendor extension metadata tag information. The + * HAL should fill in all the vendor tag operation methods, or leave ops + * unchanged if no vendor tags are defined. + * + * The definition of vendor_tag_query_ops_t can be found in + * system/media/camera/include/system/camera_metadata.h. + * + * >= CAMERA_DEVICE_API_VERSION_3_2: + * DEPRECATED. This function has been deprecated and should be set to + * NULL by the HAL. Please implement get_vendor_tag_ops in camera_common.h + * instead. + */ + void (*get_metadata_vendor_tag_ops)(const struct camera3_device*, + vendor_tag_query_ops_t* ops); + + /** + * dump: + * + * Print out debugging state for the camera device. This will be called by + * the framework when the camera service is asked for a debug dump, which + * happens when using the dumpsys tool, or when capturing a bugreport. + * + * The passed-in file descriptor can be used to write debugging text using + * dprintf() or write(). The text should be in ASCII encoding only. + * + * Performance requirements: + * + * This must be a non-blocking call. The HAL should return from this call + * in 1ms, must return from this call in 10ms. This call must avoid + * deadlocks, as it may be called at any point during camera operation. + * Any synchronization primitives used (such as mutex locks or semaphores) + * should be acquired with a timeout. + */ + void (*dump)(const struct camera3_device *, int fd); + + /** + * flush: + * + * Flush all currently in-process captures and all buffers in the pipeline + * on the given device. The framework will use this to dump all state as + * quickly as possible in order to prepare for a configure_streams() call. + * + * No buffers are required to be successfully returned, so every buffer + * held at the time of flush() (whether successfully filled or not) may be + * returned with CAMERA3_BUFFER_STATUS_ERROR. Note the HAL is still allowed + * to return valid (CAMERA3_BUFFER_STATUS_OK) buffers during this call, + * provided they are successfully filled. + * + * All requests currently in the HAL are expected to be returned as soon as + * possible. Not-in-process requests should return errors immediately. Any + * interruptible hardware blocks should be stopped, and any uninterruptible + * blocks should be waited on. + * + * flush() may be called concurrently to process_capture_request(), with the expectation that + * process_capture_request will return quickly and the request submitted in that + * process_capture_request call is treated like all other in-flight requests. Due to + * concurrency issues, it is possible that from the HAL's point of view, a + * process_capture_request() call may be started after flush has been invoked but has not + * returned yet. If such a call happens before flush() returns, the HAL should treat the new + * capture request like other in-flight pending requests (see #4 below). + * + * More specifically, the HAL must follow below requirements for various cases: + * + * 1. For captures that are too late for the HAL to cancel/stop, and will be + * completed normally by the HAL; i.e. the HAL can send shutter/notify and + * process_capture_result and buffers as normal. + * + * 2. For pending requests that have not done any processing, the HAL must call notify + * CAMERA3_MSG_ERROR_REQUEST, and return all the output buffers with + * process_capture_result in the error state (CAMERA3_BUFFER_STATUS_ERROR). + * The HAL must not place the release fence into an error state, instead, + * the release fences must be set to the acquire fences passed by the framework, + * or -1 if they have been waited on by the HAL already. This is also the path + * to follow for any captures for which the HAL already called notify() with + * CAMERA3_MSG_SHUTTER but won't be producing any metadata/valid buffers for. + * After CAMERA3_MSG_ERROR_REQUEST, for a given frame, only process_capture_results with + * buffers in CAMERA3_BUFFER_STATUS_ERROR are allowed. No further notifys or + * process_capture_result with non-null metadata is allowed. + * + * 3. For partially completed pending requests that will not have all the output + * buffers or perhaps missing metadata, the HAL should follow below: + * + * 3.1. Call notify with CAMERA3_MSG_ERROR_RESULT if some of the expected result + * metadata (i.e. one or more partial metadata) won't be available for the capture. + * + * 3.2. Call notify with CAMERA3_MSG_ERROR_BUFFER for every buffer that won't + * be produced for the capture. + * + * 3.3 Call notify with CAMERA3_MSG_SHUTTER with the capture timestamp before + * any buffers/metadata are returned with process_capture_result. + * + * 3.4 For captures that will produce some results, the HAL must not call + * CAMERA3_MSG_ERROR_REQUEST, since that indicates complete failure. + * + * 3.5. Valid buffers/metadata should be passed to the framework as normal. + * + * 3.6. Failed buffers should be returned to the framework as described for case 2. + * But failed buffers do not have to follow the strict ordering valid buffers do, + * and may be out-of-order with respect to valid buffers. For example, if buffers + * A, B, C, D, E are sent, D and E are failed, then A, E, B, D, C is an acceptable + * return order. + * + * 3.7. For fully-missing metadata, calling CAMERA3_MSG_ERROR_RESULT is sufficient, no + * need to call process_capture_result with NULL metadata or equivalent. + * + * 4. If a flush() is invoked while a process_capture_request() invocation is active, that + * process call should return as soon as possible. In addition, if a process_capture_request() + * call is made after flush() has been invoked but before flush() has returned, the + * capture request provided by the late process_capture_request call should be treated like + * a pending request in case #2 above. + * + * flush() should only return when there are no more outstanding buffers or + * requests left in the HAL. The framework may call configure_streams (as + * the HAL state is now quiesced) or may issue new requests. + * + * Note that it's sufficient to only support fully-succeeded and fully-failed result cases. + * However, it is highly desirable to support the partial failure cases as well, as it + * could help improve the flush call overall performance. + * + * Performance requirements: + * + * The HAL should return from this call in 100ms, and must return from this + * call in 1000ms. And this call must not be blocked longer than pipeline + * latency (see S7 for definition). + * + * Version information: + * + * only available if device version >= CAMERA_DEVICE_API_VERSION_3_1. + * + * Return values: + * + * 0: On a successful flush of the camera HAL. + * + * -EINVAL: If the input is malformed (the device is not valid). + * + * -ENODEV: If the camera device has encountered a serious error. After this + * error is returned, only the close() method can be successfully + * called by the framework. + */ + int (*flush)(const struct camera3_device *); + + /* reserved for future use */ + void *reserved[8]; +} camera3_device_ops_t; + +/********************************************************************** + * + * Camera device definition + * + */ +typedef struct camera3_device { + /** + * common.version must equal CAMERA_DEVICE_API_VERSION_3_0 to identify this + * device as implementing version 3.0 of the camera device HAL. + * + * Performance requirements: + * + * Camera open (common.module->common.methods->open) should return in 200ms, and must return + * in 500ms. + * Camera close (common.close) should return in 200ms, and must return in 500ms. + * + */ + hw_device_t common; + camera3_device_ops_t *ops; + void *priv; +} camera3_device_t; + +__END_DECLS + +#endif /* #ifdef ANDROID_INCLUDE_CAMERA3_H */ diff --git a/include/android/hardware/libhardware/include/hardware/camera_common.h b/include/android/hardware/libhardware/include/hardware/camera_common.h new file mode 100644 index 00000000..7658dd40 --- /dev/null +++ b/include/android/hardware/libhardware/include/hardware/camera_common.h @@ -0,0 +1,916 @@ +/* + * Copyright (C) 2012 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +// FIXME: add well-defined names for cameras + +#ifndef ANDROID_INCLUDE_CAMERA_COMMON_H +#define ANDROID_INCLUDE_CAMERA_COMMON_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +__BEGIN_DECLS + +/** + * The id of this module + */ +#define CAMERA_HARDWARE_MODULE_ID "camera" + +/** + * Module versioning information for the Camera hardware module, based on + * camera_module_t.common.module_api_version. The two most significant hex + * digits represent the major version, and the two least significant represent + * the minor version. + * + ******************************************************************************* + * Versions: 0.X - 1.X [CAMERA_MODULE_API_VERSION_1_0] + * + * Camera modules that report these version numbers implement the initial + * camera module HAL interface. All camera devices openable through this + * module support only version 1 of the camera device HAL. The device_version + * and static_camera_characteristics fields of camera_info are not valid. Only + * the android.hardware.Camera API can be supported by this module and its + * devices. + * + ******************************************************************************* + * Version: 2.0 [CAMERA_MODULE_API_VERSION_2_0] + * + * Camera modules that report this version number implement the second version + * of the camera module HAL interface. Camera devices openable through this + * module may support either version 1.0 or version 2.0 of the camera device + * HAL interface. The device_version field of camera_info is always valid; the + * static_camera_characteristics field of camera_info is valid if the + * device_version field is 2.0 or higher. + * + ******************************************************************************* + * Version: 2.1 [CAMERA_MODULE_API_VERSION_2_1] + * + * This camera module version adds support for asynchronous callbacks to the + * framework from the camera HAL module, which is used to notify the framework + * about changes to the camera module state. Modules that provide a valid + * set_callbacks() method must report at least this version number. + * + ******************************************************************************* + * Version: 2.2 [CAMERA_MODULE_API_VERSION_2_2] + * + * This camera module version adds vendor tag support from the module, and + * deprecates the old vendor_tag_query_ops that were previously only + * accessible with a device open. + * + ******************************************************************************* + * Version: 2.3 [CAMERA_MODULE_API_VERSION_2_3] + * + * This camera module version adds open legacy camera HAL device support. + * Framework can use it to open the camera device as lower device HAL version + * HAL device if the same device can support multiple device API versions. + * The standard hardware module open call (common.methods->open) continues + * to open the camera device with the latest supported version, which is + * also the version listed in camera_info_t.device_version. + * + ******************************************************************************* + * Version: 2.4 [CAMERA_MODULE_API_VERSION_2_4] + * + * This camera module version adds below API changes: + * + * 1. Torch mode support. The framework can use it to turn on torch mode for + * any camera device that has a flash unit, without opening a camera device. The + * camera device has a higher priority accessing the flash unit than the camera + * module; opening a camera device will turn off the torch if it had been enabled + * through the module interface. When there are any resource conflicts, such as + * open() is called to open a camera device, the camera HAL module must notify the + * framework through the torch mode status callback that the torch mode has been + * turned off. + * + * 2. External camera (e.g. USB hot-plug camera) support. The API updates specify that + * the camera static info is only available when camera is connected and ready to + * use for external hot-plug cameras. Calls to get static info will be invalid + * calls when camera status is not CAMERA_DEVICE_STATUS_PRESENT. The frameworks + * will only count on device status change callbacks to manage the available external + * camera list. + * + * 3. Camera arbitration hints. This module version adds support for explicitly + * indicating the number of camera devices that can be simultaneously opened and used. + * To specify valid combinations of devices, the resource_cost and conflicting_devices + * fields should always be set in the camera_info structure returned by the + * get_camera_info call. + * + * 4. Module initialization method. This will be called by the camera service + * right after the HAL module is loaded, to allow for one-time initialization + * of the HAL. It is called before any other module methods are invoked. + */ + +/** + * Predefined macros for currently-defined version numbers + */ + +/** + * All module versions <= HARDWARE_MODULE_API_VERSION(1, 0xFF) must be treated + * as CAMERA_MODULE_API_VERSION_1_0 + */ +#define CAMERA_MODULE_API_VERSION_1_0 HARDWARE_MODULE_API_VERSION(1, 0) +#define CAMERA_MODULE_API_VERSION_2_0 HARDWARE_MODULE_API_VERSION(2, 0) +#define CAMERA_MODULE_API_VERSION_2_1 HARDWARE_MODULE_API_VERSION(2, 1) +#define CAMERA_MODULE_API_VERSION_2_2 HARDWARE_MODULE_API_VERSION(2, 2) +#define CAMERA_MODULE_API_VERSION_2_3 HARDWARE_MODULE_API_VERSION(2, 3) +#define CAMERA_MODULE_API_VERSION_2_4 HARDWARE_MODULE_API_VERSION(2, 4) + +#define CAMERA_MODULE_API_VERSION_CURRENT CAMERA_MODULE_API_VERSION_2_4 + +/** + * All device versions <= HARDWARE_DEVICE_API_VERSION(1, 0xFF) must be treated + * as CAMERA_DEVICE_API_VERSION_1_0 + */ +#define CAMERA_DEVICE_API_VERSION_1_0 HARDWARE_DEVICE_API_VERSION(1, 0) +#define CAMERA_DEVICE_API_VERSION_2_0 HARDWARE_DEVICE_API_VERSION(2, 0) +#define CAMERA_DEVICE_API_VERSION_2_1 HARDWARE_DEVICE_API_VERSION(2, 1) +#define CAMERA_DEVICE_API_VERSION_3_0 HARDWARE_DEVICE_API_VERSION(3, 0) +#define CAMERA_DEVICE_API_VERSION_3_1 HARDWARE_DEVICE_API_VERSION(3, 1) +#define CAMERA_DEVICE_API_VERSION_3_2 HARDWARE_DEVICE_API_VERSION(3, 2) +#define CAMERA_DEVICE_API_VERSION_3_3 HARDWARE_DEVICE_API_VERSION(3, 3) + +// Device version 3.3 is current, older HAL camera device versions are not +// recommended for new devices. +#define CAMERA_DEVICE_API_VERSION_CURRENT CAMERA_DEVICE_API_VERSION_3_3 + +/** + * Defined in /system/media/camera/include/system/camera_metadata.h + */ +typedef struct camera_metadata camera_metadata_t; + +typedef struct camera_info { + /** + * The direction that the camera faces to. See system/core/include/system/camera.h + * for camera facing definitions. + * + * Version information (based on camera_module_t.common.module_api_version): + * + * CAMERA_MODULE_API_VERSION_2_3 or lower: + * + * It should be CAMERA_FACING_BACK or CAMERA_FACING_FRONT. + * + * CAMERA_MODULE_API_VERSION_2_4 or higher: + * + * It should be CAMERA_FACING_BACK, CAMERA_FACING_FRONT or + * CAMERA_FACING_EXTERNAL. + */ + int facing; + + /** + * The orientation of the camera image. The value is the angle that the + * camera image needs to be rotated clockwise so it shows correctly on the + * display in its natural orientation. It should be 0, 90, 180, or 270. + * + * For example, suppose a device has a naturally tall screen. The + * back-facing camera sensor is mounted in landscape. You are looking at the + * screen. If the top side of the camera sensor is aligned with the right + * edge of the screen in natural orientation, the value should be 90. If the + * top side of a front-facing camera sensor is aligned with the right of the + * screen, the value should be 270. + * + * Version information (based on camera_module_t.common.module_api_version): + * + * CAMERA_MODULE_API_VERSION_2_3 or lower: + * + * Valid in all camera_module versions. + * + * CAMERA_MODULE_API_VERSION_2_4 or higher: + * + * Valid if camera facing is CAMERA_FACING_BACK or CAMERA_FACING_FRONT, + * not valid if camera facing is CAMERA_FACING_EXTERNAL. + */ + int orientation; + + /** + * The value of camera_device_t.common.version. + * + * Version information (based on camera_module_t.common.module_api_version): + * + * CAMERA_MODULE_API_VERSION_1_0: + * + * Not valid. Can be assumed to be CAMERA_DEVICE_API_VERSION_1_0. Do + * not read this field. + * + * CAMERA_MODULE_API_VERSION_2_0 or higher: + * + * Always valid + * + */ + uint32_t device_version; + + /** + * The camera's fixed characteristics, which include all static camera metadata + * specified in system/media/camera/docs/docs.html. This should be a sorted metadata + * buffer, and may not be modified or freed by the caller. The pointer should remain + * valid for the lifetime of the camera module, and values in it may not + * change after it is returned by get_camera_info(). + * + * Version information (based on camera_module_t.common.module_api_version): + * + * CAMERA_MODULE_API_VERSION_1_0: + * + * Not valid. Extra characteristics are not available. Do not read this + * field. + * + * CAMERA_MODULE_API_VERSION_2_0 or higher: + * + * Valid if device_version >= CAMERA_DEVICE_API_VERSION_2_0. Do not read + * otherwise. + * + */ + const camera_metadata_t *static_camera_characteristics; + + /** + * The total resource "cost" of using this camera, represented as an integer + * value in the range [0, 100] where 100 represents total usage of the shared + * resource that is the limiting bottleneck of the camera subsystem. This may + * be a very rough estimate, and is used as a hint to the camera service to + * determine when to disallow multiple applications from simultaneously + * opening different cameras advertised by the camera service. + * + * The camera service must be able to simultaneously open and use any + * combination of camera devices exposed by the HAL where the sum of + * the resource costs of these cameras is <= 100. For determining cost, + * each camera device must be assumed to be configured and operating at + * the maximally resource-consuming framerate and stream size settings + * available in the configuration settings exposed for that device through + * the camera metadata. + * + * The camera service may still attempt to simultaneously open combinations + * of camera devices with a total resource cost > 100. This may succeed or + * fail. If this succeeds, combinations of configurations that are not + * supported due to resource constraints from having multiple open devices + * should fail during the configure calls. If the total resource cost is + * <= 100, open and configure should never fail for any stream configuration + * settings or other device capabilities that would normally succeed for a + * device when it is the only open camera device. + * + * This field will be used to determine whether background applications are + * allowed to use this camera device while other applications are using other + * camera devices. Note: multiple applications will never be allowed by the + * camera service to simultaneously open the same camera device. + * + * Example use cases: + * + * Ex. 1: Camera Device 0 = Back Camera + * Camera Device 1 = Front Camera + * - Using both camera devices causes a large framerate slowdown due to + * limited ISP bandwidth. + * + * Configuration: + * + * Camera Device 0 - resource_cost = 51 + * conflicting_devices = null + * Camera Device 1 - resource_cost = 51 + * conflicting_devices = null + * + * Result: + * + * Since the sum of the resource costs is > 100, if a higher-priority + * application has either device open, no lower-priority applications will be + * allowed by the camera service to open either device. If a lower-priority + * application is using a device that a higher-priority subsequently attempts + * to open, the lower-priority application will be forced to disconnect the + * the device. + * + * If the highest-priority application chooses, it may still attempt to open + * both devices (since these devices are not listed as conflicting in the + * conflicting_devices fields), but usage of these devices may fail in the + * open or configure calls. + * + * Ex. 2: Camera Device 0 = Left Back Camera + * Camera Device 1 = Right Back Camera + * Camera Device 2 = Combined stereo camera using both right and left + * back camera sensors used by devices 0, and 1 + * Camera Device 3 = Front Camera + * - Due to do hardware constraints, up to two cameras may be open at once. The + * combined stereo camera may never be used at the same time as either of the + * two back camera devices (device 0, 1), and typically requires too much + * bandwidth to use at the same time as the front camera (device 3). + * + * Configuration: + * + * Camera Device 0 - resource_cost = 50 + * conflicting_devices = { 2 } + * Camera Device 1 - resource_cost = 50 + * conflicting_devices = { 2 } + * Camera Device 2 - resource_cost = 100 + * conflicting_devices = { 0, 1 } + * Camera Device 3 - resource_cost = 50 + * conflicting_devices = null + * + * Result: + * + * Based on the conflicting_devices fields, the camera service guarantees that + * the following sets of open devices will never be allowed: { 1, 2 }, { 0, 2 }. + * + * Based on the resource_cost fields, if a high-priority foreground application + * is using camera device 0, a background application would be allowed to open + * camera device 1 or 3 (but would be forced to disconnect it again if the + * foreground application opened another device). + * + * The highest priority application may still attempt to simultaneously open + * devices 0, 2, and 3, but the HAL may fail in open or configure calls for + * this combination. + * + * Ex. 3: Camera Device 0 = Back Camera + * Camera Device 1 = Front Camera + * Camera Device 2 = Low-power Front Camera that uses the same + * sensor as device 1, but only exposes image stream + * resolutions that can be used in low-power mode + * - Using both front cameras (device 1, 2) at the same time is impossible due + * a shared physical sensor. Using the back and "high-power" front camera + * (device 1) may be impossible for some stream configurations due to hardware + * limitations, but the "low-power" front camera option may always be used as + * it has special dedicated hardware. + * + * Configuration: + * + * Camera Device 0 - resource_cost = 100 + * conflicting_devices = null + * Camera Device 1 - resource_cost = 100 + * conflicting_devices = { 2 } + * Camera Device 2 - resource_cost = 0 + * conflicting_devices = { 1 } + * Result: + * + * Based on the conflicting_devices fields, the camera service guarantees that + * the following sets of open devices will never be allowed: { 1, 2 }. + * + * Based on the resource_cost fields, only the highest priority application + * may attempt to open both device 0 and 1 at the same time. If a higher-priority + * application is not using device 1 or 2, a low-priority background application + * may open device 2 (but will be forced to disconnect it if a higher-priority + * application subsequently opens device 1 or 2). + * + * Version information (based on camera_module_t.common.module_api_version): + * + * CAMERA_MODULE_API_VERSION_2_3 or lower: + * + * Not valid. Can be assumed to be 100. Do not read this field. + * + * CAMERA_MODULE_API_VERSION_2_4 or higher: + * + * Always valid. + */ + int resource_cost; + + /** + * An array of camera device IDs represented as NULL-terminated strings + * indicating other devices that cannot be simultaneously opened while this + * camera device is in use. + * + * This field is intended to be used to indicate that this camera device + * is a composite of several other camera devices, or otherwise has + * hardware dependencies that prohibit simultaneous usage. If there are no + * dependencies, a NULL may be returned in this field to indicate this. + * + * The camera service will never simultaneously open any of the devices + * in this list while this camera device is open. + * + * The strings pointed to in this field will not be cleaned up by the camera + * service, and must remain while this device is plugged in. + * + * Version information (based on camera_module_t.common.module_api_version): + * + * CAMERA_MODULE_API_VERSION_2_3 or lower: + * + * Not valid. Can be assumed to be NULL. Do not read this field. + * + * CAMERA_MODULE_API_VERSION_2_4 or higher: + * + * Always valid. + */ + char** conflicting_devices; + + /** + * The length of the array given in the conflicting_devices field. + * + * Version information (based on camera_module_t.common.module_api_version): + * + * CAMERA_MODULE_API_VERSION_2_3 or lower: + * + * Not valid. Can be assumed to be 0. Do not read this field. + * + * CAMERA_MODULE_API_VERSION_2_4 or higher: + * + * Always valid. + */ + size_t conflicting_devices_length; + +} camera_info_t; + +/** + * camera_device_status_t: + * + * The current status of the camera device, as provided by the HAL through the + * camera_module_callbacks.camera_device_status_change() call. + * + * At module load time, the framework will assume all camera devices are in the + * CAMERA_DEVICE_STATUS_PRESENT state. The HAL should invoke + * camera_module_callbacks::camera_device_status_change to inform the framework + * of any initially NOT_PRESENT devices. + * + * Allowed transitions: + * PRESENT -> NOT_PRESENT + * NOT_PRESENT -> ENUMERATING + * NOT_PRESENT -> PRESENT + * ENUMERATING -> PRESENT + * ENUMERATING -> NOT_PRESENT + */ +typedef enum camera_device_status { + /** + * The camera device is not currently connected, and opening it will return + * failure. + * + * Version information (based on camera_module_t.common.module_api_version): + * + * CAMERA_MODULE_API_VERSION_2_3 or lower: + * + * Calls to get_camera_info must still succeed, and provide the same information + * it would if the camera were connected. + * + * CAMERA_MODULE_API_VERSION_2_4: + * + * The camera device at this status must return -EINVAL for get_camera_info call, + * as the device is not connected. + */ + CAMERA_DEVICE_STATUS_NOT_PRESENT = 0, + + /** + * The camera device is connected, and opening it will succeed. + * + * CAMERA_MODULE_API_VERSION_2_3 or lower: + * + * The information returned by get_camera_info cannot change due to this status + * change. By default, the framework will assume all devices are in this state. + * + * CAMERA_MODULE_API_VERSION_2_4: + * + * The information returned by get_camera_info will become valid after a device's + * status changes to this. By default, the framework will assume all devices are in + * this state. + */ + CAMERA_DEVICE_STATUS_PRESENT = 1, + + /** + * The camera device is connected, but it is undergoing an enumeration and + * so opening the device will return -EBUSY. + * + * CAMERA_MODULE_API_VERSION_2_3 or lower: + * + * Calls to get_camera_info must still succeed, as if the camera was in the + * PRESENT status. + * + * CAMERA_MODULE_API_VERSION_2_4: + * + * The camera device at this status must return -EINVAL for get_camera_info for call, + * as the device is not ready. + */ + CAMERA_DEVICE_STATUS_ENUMERATING = 2, + +} camera_device_status_t; + +/** + * torch_mode_status_t: + * + * The current status of the torch mode, as provided by the HAL through the + * camera_module_callbacks.torch_mode_status_change() call. + * + * The torch mode status of a camera device is applicable only when the camera + * device is present. The framework will not call set_torch_mode() to turn on + * torch mode of a camera device if the camera device is not present. At module + * load time, the framework will assume torch modes are in the + * TORCH_MODE_STATUS_AVAILABLE_OFF state if the camera device is present and + * android.flash.info.available is reported as true via get_camera_info() call. + * + * The behaviors of the camera HAL module that the framework expects in the + * following situations when a camera device's status changes: + * 1. A previously-disconnected camera device becomes connected. + * After camera_module_callbacks::camera_device_status_change() is invoked + * to inform the framework that the camera device is present, the framework + * will assume the camera device's torch mode is in + * TORCH_MODE_STATUS_AVAILABLE_OFF state. The camera HAL module does not need + * to invoke camera_module_callbacks::torch_mode_status_change() unless the + * flash unit is unavailable to use by set_torch_mode(). + * + * 2. A previously-connected camera becomes disconnected. + * After camera_module_callbacks::camera_device_status_change() is invoked + * to inform the framework that the camera device is not present, the + * framework will not call set_torch_mode() for the disconnected camera + * device until its flash unit becomes available again. The camera HAL + * module does not need to invoke + * camera_module_callbacks::torch_mode_status_change() separately to inform + * that the flash unit has become unavailable. + * + * 3. open() is called to open a camera device. + * The camera HAL module must invoke + * camera_module_callbacks::torch_mode_status_change() for all flash units + * that have entered TORCH_MODE_STATUS_NOT_AVAILABLE state and can not be + * turned on by calling set_torch_mode() anymore due to this open() call. + * open() must not trigger TORCH_MODE_STATUS_AVAILABLE_OFF before + * TORCH_MODE_STATUS_NOT_AVAILABLE for all flash units that have become + * unavailable. + * + * 4. close() is called to close a camera device. + * The camera HAL module must invoke + * camera_module_callbacks::torch_mode_status_change() for all flash units + * that have entered TORCH_MODE_STATUS_AVAILABLE_OFF state and can be turned + * on by calling set_torch_mode() again because of enough resources freed + * up by this close() call. + * + * Note that the framework calling set_torch_mode() successfully must trigger + * TORCH_MODE_STATUS_AVAILABLE_OFF or TORCH_MODE_STATUS_AVAILABLE_ON callback + * for the given camera device. Additionally it must trigger + * TORCH_MODE_STATUS_AVAILABLE_OFF callbacks for other previously-on torch + * modes if HAL cannot keep multiple torch modes on simultaneously. + */ +typedef enum torch_mode_status { + + /** + * The flash unit is no longer available and the torch mode can not be + * turned on by calling set_torch_mode(). If the torch mode is on, it + * will be turned off by HAL before HAL calls torch_mode_status_change(). + */ + TORCH_MODE_STATUS_NOT_AVAILABLE = 0, + + /** + * A torch mode has become off and available to be turned on via + * set_torch_mode(). This may happen in the following + * cases: + * 1. After the resources to turn on the torch mode have become available. + * 2. After set_torch_mode() is called to turn off the torch mode. + * 3. After the framework turned on the torch mode of some other camera + * device and HAL had to turn off the torch modes of any camera devices + * that were previously on. + */ + TORCH_MODE_STATUS_AVAILABLE_OFF = 1, + + /** + * A torch mode has become on and available to be turned off via + * set_torch_mode(). This can happen only after set_torch_mode() is called + * to turn on the torch mode. + */ + TORCH_MODE_STATUS_AVAILABLE_ON = 2, + +} torch_mode_status_t; + +/** + * Callback functions for the camera HAL module to use to inform the framework + * of changes to the camera subsystem. + * + * Version information (based on camera_module_t.common.module_api_version): + * + * Each callback is called only by HAL modules implementing the indicated + * version or higher of the HAL module API interface. + * + * CAMERA_MODULE_API_VERSION_2_1: + * camera_device_status_change() + * + * CAMERA_MODULE_API_VERSION_2_4: + * torch_mode_status_change() + + */ +typedef struct camera_module_callbacks { + + /** + * camera_device_status_change: + * + * Callback to the framework to indicate that the state of a specific camera + * device has changed. At module load time, the framework will assume all + * camera devices are in the CAMERA_DEVICE_STATUS_PRESENT state. The HAL + * must call this method to inform the framework of any initially + * NOT_PRESENT devices. + * + * This callback is added for CAMERA_MODULE_API_VERSION_2_1. + * + * camera_module_callbacks: The instance of camera_module_callbacks_t passed + * to the module with set_callbacks. + * + * camera_id: The ID of the camera device that has a new status. + * + * new_status: The new status code, one of the camera_device_status_t enums, + * or a platform-specific status. + * + */ + void (*camera_device_status_change)(const struct camera_module_callbacks*, + int camera_id, + int new_status); + + /** + * torch_mode_status_change: + * + * Callback to the framework to indicate that the state of the torch mode + * of the flash unit associated with a specific camera device has changed. + * At module load time, the framework will assume the torch modes are in + * the TORCH_MODE_STATUS_AVAILABLE_OFF state if android.flash.info.available + * is reported as true via get_camera_info() call. + * + * This callback is added for CAMERA_MODULE_API_VERSION_2_4. + * + * camera_module_callbacks: The instance of camera_module_callbacks_t + * passed to the module with set_callbacks. + * + * camera_id: The ID of camera device whose flash unit has a new torch mode + * status. + * + * new_status: The new status code, one of the torch_mode_status_t enums. + */ + void (*torch_mode_status_change)(const struct camera_module_callbacks*, + const char* camera_id, + int new_status); + + +} camera_module_callbacks_t; + +typedef struct camera_module { + /** + * Common methods of the camera module. This *must* be the first member of + * camera_module as users of this structure will cast a hw_module_t to + * camera_module pointer in contexts where it's known the hw_module_t + * references a camera_module. + * + * The return values for common.methods->open for camera_module are: + * + * 0: On a successful open of the camera device. + * + * -ENODEV: The camera device cannot be opened due to an internal + * error. + * + * -EINVAL: The input arguments are invalid, i.e. the id is invalid, + * and/or the module is invalid. + * + * -EBUSY: The camera device was already opened for this camera id + * (by using this method or open_legacy), + * regardless of the device HAL version it was opened as. + * + * -EUSERS: The maximal number of camera devices that can be + * opened concurrently were opened already, either by + * this method or the open_legacy method. + * + * All other return values from common.methods->open will be treated as + * -ENODEV. + */ + hw_module_t common; + + /** + * get_number_of_cameras: + * + * Returns the number of camera devices accessible through the camera + * module. The camera devices are numbered 0 through N-1, where N is the + * value returned by this call. The name of the camera device for open() is + * simply the number converted to a string. That is, "0" for camera ID 0, + * "1" for camera ID 1. + * + * Version information (based on camera_module_t.common.module_api_version): + * + * CAMERA_MODULE_API_VERSION_2_3 or lower: + * + * The value here must be static, and cannot change after the first call + * to this method. + * + * CAMERA_MODULE_API_VERSION_2_4 or higher: + * + * The value here must be static, and must count only built-in cameras, + * which have CAMERA_FACING_BACK or CAMERA_FACING_FRONT camera facing values + * (camera_info.facing). The HAL must not include the external cameras + * (camera_info.facing == CAMERA_FACING_EXTERNAL) into the return value + * of this call. Frameworks will use camera_device_status_change callback + * to manage number of external cameras. + */ + int (*get_number_of_cameras)(void); + + /** + * get_camera_info: + * + * Return the static camera information for a given camera device. This + * information may not change for a camera device. + * + * Return values: + * + * 0: On a successful operation + * + * -ENODEV: The information cannot be provided due to an internal + * error. + * + * -EINVAL: The input arguments are invalid, i.e. the id is invalid, + * and/or the module is invalid. + * + * Version information (based on camera_module_t.common.module_api_version): + * + * CAMERA_MODULE_API_VERSION_2_4 or higher: + * + * When a camera is disconnected, its camera id becomes invalid. Calling this + * this method with this invalid camera id will get -EINVAL and NULL camera + * static metadata (camera_info.static_camera_characteristics). + */ + int (*get_camera_info)(int camera_id, struct camera_info *info); + + /** + * set_callbacks: + * + * Provide callback function pointers to the HAL module to inform framework + * of asynchronous camera module events. The framework will call this + * function once after initial camera HAL module load, after the + * get_number_of_cameras() method is called for the first time, and before + * any other calls to the module. + * + * Version information (based on camera_module_t.common.module_api_version): + * + * CAMERA_MODULE_API_VERSION_1_0, CAMERA_MODULE_API_VERSION_2_0: + * + * Not provided by HAL module. Framework may not call this function. + * + * CAMERA_MODULE_API_VERSION_2_1: + * + * Valid to be called by the framework. + * + * Return values: + * + * 0: On a successful operation + * + * -ENODEV: The operation cannot be completed due to an internal + * error. + * + * -EINVAL: The input arguments are invalid, i.e. the callbacks are + * null + */ + int (*set_callbacks)(const camera_module_callbacks_t *callbacks); + + /** + * get_vendor_tag_ops: + * + * Get methods to query for vendor extension metadata tag information. The + * HAL should fill in all the vendor tag operation methods, or leave ops + * unchanged if no vendor tags are defined. + * + * The vendor_tag_ops structure used here is defined in: + * system/media/camera/include/system/vendor_tags.h + * + * Version information (based on camera_module_t.common.module_api_version): + * + * CAMERA_MODULE_API_VERSION_1_x/2_0/2_1: + * Not provided by HAL module. Framework may not call this function. + * + * CAMERA_MODULE_API_VERSION_2_2: + * Valid to be called by the framework. + */ + void (*get_vendor_tag_ops)(vendor_tag_ops_t* ops); + + /** + * open_legacy: + * + * Open a specific legacy camera HAL device if multiple device HAL API + * versions are supported by this camera HAL module. For example, if the + * camera module supports both CAMERA_DEVICE_API_VERSION_1_0 and + * CAMERA_DEVICE_API_VERSION_3_2 device API for the same camera id, + * framework can call this function to open the camera device as + * CAMERA_DEVICE_API_VERSION_1_0 device. + * + * This is an optional method. A Camera HAL module does not need to support + * more than one device HAL version per device, and such modules may return + * -ENOSYS for all calls to this method. For all older HAL device API + * versions that are not supported, it may return -EOPNOTSUPP. When above + * cases occur, The normal open() method (common.methods->open) will be + * used by the framework instead. + * + * Version information (based on camera_module_t.common.module_api_version): + * + * CAMERA_MODULE_API_VERSION_1_x/2_0/2_1/2_2: + * Not provided by HAL module. Framework will not call this function. + * + * CAMERA_MODULE_API_VERSION_2_3: + * Valid to be called by the framework. + * + * Return values: + * + * 0: On a successful open of the camera device. + * + * -ENOSYS This method is not supported. + * + * -EOPNOTSUPP: The requested HAL version is not supported by this method. + * + * -EINVAL: The input arguments are invalid, i.e. the id is invalid, + * and/or the module is invalid. + * + * -EBUSY: The camera device was already opened for this camera id + * (by using this method or common.methods->open method), + * regardless of the device HAL version it was opened as. + * + * -EUSERS: The maximal number of camera devices that can be + * opened concurrently were opened already, either by + * this method or common.methods->open method. + */ + int (*open_legacy)(const struct hw_module_t* module, const char* id, + uint32_t halVersion, struct hw_device_t** device); + + /** + * set_torch_mode: + * + * Turn on or off the torch mode of the flash unit associated with a given + * camera ID. If the operation is successful, HAL must notify the framework + * torch state by invoking + * camera_module_callbacks.torch_mode_status_change() with the new state. + * + * The camera device has a higher priority accessing the flash unit. When + * there are any resource conflicts, such as open() is called to open a + * camera device, HAL module must notify the framework through + * camera_module_callbacks.torch_mode_status_change() that the + * torch mode has been turned off and the torch mode state has become + * TORCH_MODE_STATUS_NOT_AVAILABLE. When resources to turn on torch mode + * become available again, HAL module must notify the framework through + * camera_module_callbacks.torch_mode_status_change() that the torch mode + * state has become TORCH_MODE_STATUS_AVAILABLE_OFF for set_torch_mode() to + * be called. + * + * When the framework calls set_torch_mode() to turn on the torch mode of a + * flash unit, if HAL cannot keep multiple torch modes on simultaneously, + * HAL should turn off the torch mode that was turned on by + * a previous set_torch_mode() call and notify the framework that the torch + * mode state of that flash unit has become TORCH_MODE_STATUS_AVAILABLE_OFF. + * + * Version information (based on camera_module_t.common.module_api_version): + * + * CAMERA_MODULE_API_VERSION_1_x/2_0/2_1/2_2/2_3: + * Not provided by HAL module. Framework will not call this function. + * + * CAMERA_MODULE_API_VERSION_2_4: + * Valid to be called by the framework. + * + * Return values: + * + * 0: On a successful operation. + * + * -ENOSYS: The camera device does not support this operation. It is + * returned if and only if android.flash.info.available is + * false. + * + * -EBUSY: The camera device is already in use. + * + * -EUSERS: The resources needed to turn on the torch mode are not + * available, typically because other camera devices are + * holding the resources to make using the flash unit not + * possible. + * + * -EINVAL: camera_id is invalid. + * + */ + int (*set_torch_mode)(const char* camera_id, bool enabled); + + /** + * init: + * + * This method is called by the camera service before any other methods + * are invoked, right after the camera HAL library has been successfully + * loaded. It may be left as NULL by the HAL module, if no initialization + * in needed. + * + * It can be used by HAL implementations to perform initialization and + * other one-time operations. + * + * Version information (based on camera_module_t.common.module_api_version): + * + * CAMERA_MODULE_API_VERSION_1_x/2_0/2_1/2_2/2_3: + * Not provided by HAL module. Framework will not call this function. + * + * CAMERA_MODULE_API_VERSION_2_4: + * If not NULL, will always be called by the framework once after the HAL + * module is loaded, before any other HAL module method is called. + * + * Return values: + * + * 0: On a successful operation. + * + * -ENODEV: Initialization cannot be completed due to an internal + * error. The HAL must be assumed to be in a nonfunctional + * state. + * + */ + int (*init)(); + + /* reserved for future use */ + void* reserved[5]; +} camera_module_t; + +__END_DECLS + +#endif /* ANDROID_INCLUDE_CAMERA_COMMON_H */ diff --git a/include/android/hardware/libhardware/include/hardware/fb.h b/include/android/hardware/libhardware/include/hardware/fb.h new file mode 100644 index 00000000..9df94165 --- /dev/null +++ b/include/android/hardware/libhardware/include/hardware/fb.h @@ -0,0 +1,173 @@ +/* + * Copyright (C) 2008 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + + +#ifndef ANDROID_FB_INTERFACE_H +#define ANDROID_FB_INTERFACE_H + +#include +#include +#include + +#include + +#include + +__BEGIN_DECLS + +#define GRALLOC_HARDWARE_FB0 "fb0" + +/*****************************************************************************/ + + +/*****************************************************************************/ + +typedef struct framebuffer_device_t { + /** + * Common methods of the framebuffer device. This *must* be the first member of + * framebuffer_device_t as users of this structure will cast a hw_device_t to + * framebuffer_device_t pointer in contexts where it's known the hw_device_t references a + * framebuffer_device_t. + */ + struct hw_device_t common; + + /* flags describing some attributes of the framebuffer */ + const uint32_t flags; + + /* dimensions of the framebuffer in pixels */ + const uint32_t width; + const uint32_t height; + + /* frambuffer stride in pixels */ + const int stride; + + /* framebuffer pixel format */ + const int format; + + /* resolution of the framebuffer's display panel in pixel per inch*/ + const float xdpi; + const float ydpi; + + /* framebuffer's display panel refresh rate in frames per second */ + const float fps; + + /* min swap interval supported by this framebuffer */ + const int minSwapInterval; + + /* max swap interval supported by this framebuffer */ + const int maxSwapInterval; + + /* Number of framebuffers supported*/ + const int numFramebuffers; + + int reserved[7]; + + /* + * requests a specific swap-interval (same definition than EGL) + * + * Returns 0 on success or -errno on error. + */ + int (*setSwapInterval)(struct framebuffer_device_t* window, + int interval); + + /* + * This hook is OPTIONAL. + * + * It is non NULL If the framebuffer driver supports "update-on-demand" + * and the given rectangle is the area of the screen that gets + * updated during (*post)(). + * + * This is useful on devices that are able to DMA only a portion of + * the screen to the display panel, upon demand -- as opposed to + * constantly refreshing the panel 60 times per second, for instance. + * + * Only the area defined by this rectangle is guaranteed to be valid, that + * is, the driver is not allowed to post anything outside of this + * rectangle. + * + * The rectangle evaluated during (*post)() and specifies which area + * of the buffer passed in (*post)() shall to be posted. + * + * return -EINVAL if width or height <=0, or if left or top < 0 + */ + int (*setUpdateRect)(struct framebuffer_device_t* window, + int left, int top, int width, int height); + + /* + * Post to the display (display it on the screen) + * The buffer must have been allocated with the + * GRALLOC_USAGE_HW_FB usage flag. + * buffer must be the same width and height as the display and must NOT + * be locked. + * + * The buffer is shown during the next VSYNC. + * + * If the same buffer is posted again (possibly after some other buffer), + * post() will block until the the first post is completed. + * + * Internally, post() is expected to lock the buffer so that a + * subsequent call to gralloc_module_t::(*lock)() with USAGE_RENDER or + * USAGE_*_WRITE will block until it is safe; that is typically once this + * buffer is shown and another buffer has been posted. + * + * Returns 0 on success or -errno on error. + */ + int (*post)(struct framebuffer_device_t* dev, buffer_handle_t buffer); + + + /* + * The (*compositionComplete)() method must be called after the + * compositor has finished issuing GL commands for client buffers. + */ + + int (*compositionComplete)(struct framebuffer_device_t* dev); + + /* + * This hook is OPTIONAL. + * + * If non NULL it will be caused by SurfaceFlinger on dumpsys + */ + void (*dump)(struct framebuffer_device_t* dev, char *buff, int buff_len); + + /* + * (*enableScreen)() is used to either blank (enable=0) or + * unblank (enable=1) the screen this framebuffer is attached to. + * + * Returns 0 on success or -errno on error. + */ + int (*enableScreen)(struct framebuffer_device_t* dev, int enable); + + void* reserved_proc[6]; + +} framebuffer_device_t; + + +/** convenience API for opening and closing a supported device */ + +static inline int framebuffer_open(const struct hw_module_t* module, + struct framebuffer_device_t** device) { + return module->methods->open(module, + GRALLOC_HARDWARE_FB0, (struct hw_device_t**)device); +} + +static inline int framebuffer_close(struct framebuffer_device_t* device) { + return device->common.close(&device->common); +} + + +__END_DECLS + +#endif // ANDROID_FB_INTERFACE_H diff --git a/include/android/hardware/libhardware/include/hardware/gralloc.h b/include/android/hardware/libhardware/include/hardware/gralloc.h new file mode 100644 index 00000000..ef86f903 --- /dev/null +++ b/include/android/hardware/libhardware/include/hardware/gralloc.h @@ -0,0 +1,384 @@ +/* + * Copyright (C) 2008 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + + +#ifndef ANDROID_GRALLOC_INTERFACE_H +#define ANDROID_GRALLOC_INTERFACE_H + +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include + +__BEGIN_DECLS + +/** + * Module versioning information for the Gralloc hardware module, based on + * gralloc_module_t.common.module_api_version. + * + * Version History: + * + * GRALLOC_MODULE_API_VERSION_0_1: + * Initial Gralloc hardware module API. + * + * GRALLOC_MODULE_API_VERSION_0_2: + * Add support for flexible YCbCr format with (*lock_ycbcr)() method. + * + * GRALLOC_MODULE_API_VERSION_0_3: + * Add support for fence passing to/from lock/unlock. + */ + +#define GRALLOC_MODULE_API_VERSION_0_1 HARDWARE_MODULE_API_VERSION(0, 1) +#define GRALLOC_MODULE_API_VERSION_0_2 HARDWARE_MODULE_API_VERSION(0, 2) +#define GRALLOC_MODULE_API_VERSION_0_3 HARDWARE_MODULE_API_VERSION(0, 3) + +#define GRALLOC_DEVICE_API_VERSION_0_1 HARDWARE_DEVICE_API_VERSION(0, 1) + +/** + * The id of this module + */ +#define GRALLOC_HARDWARE_MODULE_ID "gralloc" + +/** + * Name of the graphics device to open + */ + +#define GRALLOC_HARDWARE_GPU0 "gpu0" + +enum { + /* buffer is never read in software */ + GRALLOC_USAGE_SW_READ_NEVER = 0x00000000, + /* buffer is rarely read in software */ + GRALLOC_USAGE_SW_READ_RARELY = 0x00000002, + /* buffer is often read in software */ + GRALLOC_USAGE_SW_READ_OFTEN = 0x00000003, + /* mask for the software read values */ + GRALLOC_USAGE_SW_READ_MASK = 0x0000000F, + + /* buffer is never written in software */ + GRALLOC_USAGE_SW_WRITE_NEVER = 0x00000000, + /* buffer is rarely written in software */ + GRALLOC_USAGE_SW_WRITE_RARELY = 0x00000020, + /* buffer is often written in software */ + GRALLOC_USAGE_SW_WRITE_OFTEN = 0x00000030, + /* mask for the software write values */ + GRALLOC_USAGE_SW_WRITE_MASK = 0x000000F0, + + /* buffer will be used as an OpenGL ES texture */ + GRALLOC_USAGE_HW_TEXTURE = 0x00000100, + /* buffer will be used as an OpenGL ES render target */ + GRALLOC_USAGE_HW_RENDER = 0x00000200, + /* buffer will be used by the 2D hardware blitter */ + GRALLOC_USAGE_HW_2D = 0x00000400, + /* buffer will be used by the HWComposer HAL module */ + GRALLOC_USAGE_HW_COMPOSER = 0x00000800, + /* buffer will be used with the framebuffer device */ + GRALLOC_USAGE_HW_FB = 0x00001000, + + /* buffer should be displayed full-screen on an external display when + * possible */ + GRALLOC_USAGE_EXTERNAL_DISP = 0x00002000, + + /* Must have a hardware-protected path to external display sink for + * this buffer. If a hardware-protected path is not available, then + * either don't composite only this buffer (preferred) to the + * external sink, or (less desirable) do not route the entire + * composition to the external sink. */ + GRALLOC_USAGE_PROTECTED = 0x00004000, + + /* buffer may be used as a cursor */ + GRALLOC_USAGE_CURSOR = 0x00008000, + + /* buffer will be used with the HW video encoder */ + GRALLOC_USAGE_HW_VIDEO_ENCODER = 0x00010000, + /* buffer will be written by the HW camera pipeline */ + GRALLOC_USAGE_HW_CAMERA_WRITE = 0x00020000, + /* buffer will be read by the HW camera pipeline */ + GRALLOC_USAGE_HW_CAMERA_READ = 0x00040000, + /* buffer will be used as part of zero-shutter-lag queue */ + GRALLOC_USAGE_HW_CAMERA_ZSL = 0x00060000, + /* mask for the camera access values */ + GRALLOC_USAGE_HW_CAMERA_MASK = 0x00060000, + /* mask for the software usage bit-mask */ + GRALLOC_USAGE_HW_MASK = 0x00071F00, + + /* buffer will be used as a RenderScript Allocation */ + GRALLOC_USAGE_RENDERSCRIPT = 0x00100000, + + /* Set by the consumer to indicate to the producer that they may attach a + * buffer that they did not detach from the BufferQueue. Will be filtered + * out by GRALLOC_USAGE_ALLOC_MASK, so gralloc modules will not need to + * handle this flag. */ + GRALLOC_USAGE_FOREIGN_BUFFERS = 0x00200000, + + /* Mask of all flags which could be passed to a gralloc module for buffer + * allocation. Any flags not in this mask do not need to be handled by + * gralloc modules. */ + GRALLOC_USAGE_ALLOC_MASK = ~(GRALLOC_USAGE_FOREIGN_BUFFERS), + + /* implementation-specific private usage flags */ + GRALLOC_USAGE_PRIVATE_0 = 0x10000000, + GRALLOC_USAGE_PRIVATE_1 = 0x20000000, + GRALLOC_USAGE_PRIVATE_2 = 0x40000000, + GRALLOC_USAGE_PRIVATE_3 = 0x80000000, + GRALLOC_USAGE_PRIVATE_MASK = 0xF0000000, +}; + +/*****************************************************************************/ + +/** + * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM + * and the fields of this data structure must begin with hw_module_t + * followed by module specific information. + */ +typedef struct gralloc_module_t { + struct hw_module_t common; + + /* + * (*registerBuffer)() must be called before a buffer_handle_t that has not + * been created with (*alloc_device_t::alloc)() can be used. + * + * This is intended to be used with buffer_handle_t's that have been + * received in this process through IPC. + * + * This function checks that the handle is indeed a valid one and prepares + * it for use with (*lock)() and (*unlock)(). + * + * It is not necessary to call (*registerBuffer)() on a handle created + * with (*alloc_device_t::alloc)(). + * + * returns an error if this buffer_handle_t is not valid. + */ + int (*registerBuffer)(struct gralloc_module_t const* module, + buffer_handle_t handle); + + /* + * (*unregisterBuffer)() is called once this handle is no longer needed in + * this process. After this call, it is an error to call (*lock)(), + * (*unlock)(), or (*registerBuffer)(). + * + * This function doesn't close or free the handle itself; this is done + * by other means, usually through libcutils's native_handle_close() and + * native_handle_free(). + * + * It is an error to call (*unregisterBuffer)() on a buffer that wasn't + * explicitly registered first. + */ + int (*unregisterBuffer)(struct gralloc_module_t const* module, + buffer_handle_t handle); + + /* + * The (*lock)() method is called before a buffer is accessed for the + * specified usage. This call may block, for instance if the h/w needs + * to finish rendering or if CPU caches need to be synchronized. + * + * The caller promises to modify only pixels in the area specified + * by (l,t,w,h). + * + * The content of the buffer outside of the specified area is NOT modified + * by this call. + * + * If usage specifies GRALLOC_USAGE_SW_*, vaddr is filled with the address + * of the buffer in virtual memory. + * + * Note calling (*lock)() on HAL_PIXEL_FORMAT_YCbCr_*_888 buffers will fail + * and return -EINVAL. These buffers must be locked with (*lock_ycbcr)() + * instead. + * + * THREADING CONSIDERATIONS: + * + * It is legal for several different threads to lock a buffer from + * read access, none of the threads are blocked. + * + * However, locking a buffer simultaneously for write or read/write is + * undefined, but: + * - shall not result in termination of the process + * - shall not block the caller + * It is acceptable to return an error or to leave the buffer's content + * into an indeterminate state. + * + * If the buffer was created with a usage mask incompatible with the + * requested usage flags here, -EINVAL is returned. + * + */ + + int (*lock)(struct gralloc_module_t const* module, + buffer_handle_t handle, int usage, + int l, int t, int w, int h, + void** vaddr); + + + /* + * The (*unlock)() method must be called after all changes to the buffer + * are completed. + */ + + int (*unlock)(struct gralloc_module_t const* module, + buffer_handle_t handle); + + + /* reserved for future use */ + int (*perform)(struct gralloc_module_t const* module, + int operation, ... ); + + /* + * The (*lock_ycbcr)() method is like the (*lock)() method, with the + * difference that it fills a struct ycbcr with a description of the buffer + * layout, and zeroes out the reserved fields. + * + * If the buffer format is not compatible with a flexible YUV format (e.g. + * the buffer layout cannot be represented with the ycbcr struct), it + * will return -EINVAL. + * + * This method must work on buffers with HAL_PIXEL_FORMAT_YCbCr_*_888 + * if supported by the device, as well as with any other format that is + * requested by the multimedia codecs when they are configured with a + * flexible-YUV-compatible color-format with android native buffers. + * + * Note that this method may also be called on buffers of other formats, + * including non-YUV formats. + * + * Added in GRALLOC_MODULE_API_VERSION_0_2. + */ + + int (*lock_ycbcr)(struct gralloc_module_t const* module, + buffer_handle_t handle, int usage, + int l, int t, int w, int h, + struct android_ycbcr *ycbcr); + + /* + * The (*lockAsync)() method is like the (*lock)() method except + * that the buffer's sync fence object is passed into the lock + * call instead of requiring the caller to wait for completion. + * + * The gralloc implementation takes ownership of the fenceFd and + * is responsible for closing it when no longer needed. + * + * Added in GRALLOC_MODULE_API_VERSION_0_3. + */ + int (*lockAsync)(struct gralloc_module_t const* module, + buffer_handle_t handle, int usage, + int l, int t, int w, int h, + void** vaddr, int fenceFd); + + /* + * The (*unlockAsync)() method is like the (*unlock)() method + * except that a buffer sync fence object is returned from the + * lock call, representing the completion of any pending work + * performed by the gralloc implementation. + * + * The caller takes ownership of the fenceFd and is responsible + * for closing it when no longer needed. + * + * Added in GRALLOC_MODULE_API_VERSION_0_3. + */ + int (*unlockAsync)(struct gralloc_module_t const* module, + buffer_handle_t handle, int* fenceFd); + + /* + * The (*lockAsync_ycbcr)() method is like the (*lock_ycbcr)() + * method except that the buffer's sync fence object is passed + * into the lock call instead of requiring the caller to wait for + * completion. + * + * The gralloc implementation takes ownership of the fenceFd and + * is responsible for closing it when no longer needed. + * + * Added in GRALLOC_MODULE_API_VERSION_0_3. + */ + int (*lockAsync_ycbcr)(struct gralloc_module_t const* module, + buffer_handle_t handle, int usage, + int l, int t, int w, int h, + struct android_ycbcr *ycbcr, int fenceFd); + + /* reserved for future use */ + void* reserved_proc[3]; +} gralloc_module_t; + +/*****************************************************************************/ + +/** + * Every device data structure must begin with hw_device_t + * followed by module specific public methods and attributes. + */ + +typedef struct alloc_device_t { + struct hw_device_t common; + + /* + * (*alloc)() Allocates a buffer in graphic memory with the requested + * parameters and returns a buffer_handle_t and the stride in pixels to + * allow the implementation to satisfy hardware constraints on the width + * of a pixmap (eg: it may have to be multiple of 8 pixels). + * The CALLER TAKES OWNERSHIP of the buffer_handle_t. + * + * If format is HAL_PIXEL_FORMAT_YCbCr_420_888, the returned stride must be + * 0, since the actual strides are available from the android_ycbcr + * structure. + * + * Returns 0 on success or -errno on error. + */ + + int (*alloc)(struct alloc_device_t* dev, + int w, int h, int format, int usage, + buffer_handle_t* handle, int* stride); + + /* + * (*free)() Frees a previously allocated buffer. + * Behavior is undefined if the buffer is still mapped in any process, + * but shall not result in termination of the program or security breaches + * (allowing a process to get access to another process' buffers). + * THIS FUNCTION TAKES OWNERSHIP of the buffer_handle_t which becomes + * invalid after the call. + * + * Returns 0 on success or -errno on error. + */ + int (*free)(struct alloc_device_t* dev, + buffer_handle_t handle); + + /* This hook is OPTIONAL. + * + * If non NULL it will be caused by SurfaceFlinger on dumpsys + */ + void (*dump)(struct alloc_device_t *dev, char *buff, int buff_len); + + void* reserved_proc[7]; +} alloc_device_t; + + +/** convenience API for opening and closing a supported device */ + +static inline int gralloc_open(const struct hw_module_t* module, + struct alloc_device_t** device) { + return module->methods->open(module, + GRALLOC_HARDWARE_GPU0, (struct hw_device_t**)device); +} + +static inline int gralloc_close(struct alloc_device_t* device) { + return device->common.close(&device->common); +} + +__END_DECLS + +#endif // ANDROID_GRALLOC_INTERFACE_H diff --git a/include/android/hardware/libhardware/include/hardware/hardware.h b/include/android/hardware/libhardware/include/hardware/hardware.h new file mode 100644 index 00000000..74f57aa4 --- /dev/null +++ b/include/android/hardware/libhardware/include/hardware/hardware.h @@ -0,0 +1,238 @@ +/* + * Copyright (C) 2008 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef ANDROID_INCLUDE_HARDWARE_HARDWARE_H +#define ANDROID_INCLUDE_HARDWARE_HARDWARE_H + +#include +#include + +#include +#include + +__BEGIN_DECLS + +/* + * Value for the hw_module_t.tag field + */ + +#define MAKE_TAG_CONSTANT(A,B,C,D) (((A) << 24) | ((B) << 16) | ((C) << 8) | (D)) + +#define HARDWARE_MODULE_TAG MAKE_TAG_CONSTANT('H', 'W', 'M', 'T') +#define HARDWARE_DEVICE_TAG MAKE_TAG_CONSTANT('H', 'W', 'D', 'T') + +#define HARDWARE_MAKE_API_VERSION(maj,min) \ + ((((maj) & 0xff) << 8) | ((min) & 0xff)) + +#define HARDWARE_MAKE_API_VERSION_2(maj,min,hdr) \ + ((((maj) & 0xff) << 24) | (((min) & 0xff) << 16) | ((hdr) & 0xffff)) +#define HARDWARE_API_VERSION_2_MAJ_MIN_MASK 0xffff0000 +#define HARDWARE_API_VERSION_2_HEADER_MASK 0x0000ffff + + +/* + * The current HAL API version. + * + * All module implementations must set the hw_module_t.hal_api_version field + * to this value when declaring the module with HAL_MODULE_INFO_SYM. + * + * Note that previous implementations have always set this field to 0. + * Therefore, libhardware HAL API will always consider versions 0.0 and 1.0 + * to be 100% binary compatible. + * + */ +#define HARDWARE_HAL_API_VERSION HARDWARE_MAKE_API_VERSION(1, 0) + +/* + * Helper macros for module implementors. + * + * The derived modules should provide convenience macros for supported + * versions so that implementations can explicitly specify module/device + * versions at definition time. + * + * Use this macro to set the hw_module_t.module_api_version field. + */ +#define HARDWARE_MODULE_API_VERSION(maj,min) HARDWARE_MAKE_API_VERSION(maj,min) +#define HARDWARE_MODULE_API_VERSION_2(maj,min,hdr) HARDWARE_MAKE_API_VERSION_2(maj,min,hdr) + +/* + * Use this macro to set the hw_device_t.version field + */ +#define HARDWARE_DEVICE_API_VERSION(maj,min) HARDWARE_MAKE_API_VERSION(maj,min) +#define HARDWARE_DEVICE_API_VERSION_2(maj,min,hdr) HARDWARE_MAKE_API_VERSION_2(maj,min,hdr) + +struct hw_module_t; +struct hw_module_methods_t; +struct hw_device_t; + +/** + * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM + * and the fields of this data structure must begin with hw_module_t + * followed by module specific information. + */ +typedef struct hw_module_t { + /** tag must be initialized to HARDWARE_MODULE_TAG */ + uint32_t tag; + + /** + * The API version of the implemented module. The module owner is + * responsible for updating the version when a module interface has + * changed. + * + * The derived modules such as gralloc and audio own and manage this field. + * The module user must interpret the version field to decide whether or + * not to inter-operate with the supplied module implementation. + * For example, SurfaceFlinger is responsible for making sure that + * it knows how to manage different versions of the gralloc-module API, + * and AudioFlinger must know how to do the same for audio-module API. + * + * The module API version should include a major and a minor component. + * For example, version 1.0 could be represented as 0x0100. This format + * implies that versions 0x0100-0x01ff are all API-compatible. + * + * In the future, libhardware will expose a hw_get_module_version() + * (or equivalent) function that will take minimum/maximum supported + * versions as arguments and would be able to reject modules with + * versions outside of the supplied range. + */ + uint16_t module_api_version; +#define version_major module_api_version + /** + * version_major/version_minor defines are supplied here for temporary + * source code compatibility. They will be removed in the next version. + * ALL clients must convert to the new version format. + */ + + /** + * The API version of the HAL module interface. This is meant to + * version the hw_module_t, hw_module_methods_t, and hw_device_t + * structures and definitions. + * + * The HAL interface owns this field. Module users/implementations + * must NOT rely on this value for version information. + * + * Presently, 0 is the only valid value. + */ + uint16_t hal_api_version; +#define version_minor hal_api_version + + /** Identifier of module */ + const char *id; + + /** Name of this module */ + const char *name; + + /** Author/owner/implementor of the module */ + const char *author; + + /** Modules methods */ + struct hw_module_methods_t* methods; + + /** module's dso */ + void* dso; + +#ifdef __LP64__ + uint64_t reserved[32-7]; +#else + /** padding to 128 bytes, reserved for future use */ + uint32_t reserved[32-7]; +#endif + +} hw_module_t; + +typedef struct hw_module_methods_t { + /** Open a specific device */ + int (*open)(const struct hw_module_t* module, const char* id, + struct hw_device_t** device); + +} hw_module_methods_t; + +/** + * Every device data structure must begin with hw_device_t + * followed by module specific public methods and attributes. + */ +typedef struct hw_device_t { + /** tag must be initialized to HARDWARE_DEVICE_TAG */ + uint32_t tag; + + /** + * Version of the module-specific device API. This value is used by + * the derived-module user to manage different device implementations. + * + * The module user is responsible for checking the module_api_version + * and device version fields to ensure that the user is capable of + * communicating with the specific module implementation. + * + * One module can support multiple devices with different versions. This + * can be useful when a device interface changes in an incompatible way + * but it is still necessary to support older implementations at the same + * time. One such example is the Camera 2.0 API. + * + * This field is interpreted by the module user and is ignored by the + * HAL interface itself. + */ + uint32_t version; + + /** reference to the module this device belongs to */ + struct hw_module_t* module; + + /** padding reserved for future use */ +#ifdef __LP64__ + uint64_t reserved[12]; +#else + uint32_t reserved[12]; +#endif + + /** Close this device */ + int (*close)(struct hw_device_t* device); + +} hw_device_t; + +/** + * Name of the hal_module_info + */ +#define HAL_MODULE_INFO_SYM HMI + +/** + * Name of the hal_module_info as a string + */ +#define HAL_MODULE_INFO_SYM_AS_STR "HMI" + +/** + * Get the module info associated with a module by id. + * + * @return: 0 == success, <0 == error and *module == NULL + */ +int hw_get_module(const char *id, const struct hw_module_t **module); + +/** + * Get the module info associated with a module instance by class 'class_id' + * and instance 'inst'. + * + * Some modules types necessitate multiple instances. For example audio supports + * multiple concurrent interfaces and thus 'audio' is the module class + * and 'primary' or 'a2dp' are module interfaces. This implies that the files + * providing these modules would be named audio.primary..so and + * audio.a2dp..so + * + * @return: 0 == success, <0 == error and *module == NULL + */ +int hw_get_module_by_class(const char *class_id, const char *inst, + const struct hw_module_t **module); + +__END_DECLS + +#endif /* ANDROID_INCLUDE_HARDWARE_HARDWARE_H */ -- cgit v1.2.1