| Age | Commit message (Collapse) | Author |
|---|
|
Add a field to IPAModuleInfo to contain the license of the module.
This license field will be used to determine whether the IPA module
should be run in an isolated process or not. If the license is open
source, then the IPA module will be allowed to run without process
isolation, if the user enables it. If the license is not open source,
then the IPA module will be run with process isolation.
Update the dummy IPA and IPA test to conform to the new struct layout.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Test that setting the log file and log levels works from an application
point of view. The test uses the internal logging mechanism as well,
just to write to the log file.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add tests that exercises the Object-related signal code paths (in
particular automatic disconnection on Signal deletion) when the receiver
inherits from multiple base classes, with Object being the second base.
This tests the casts to and from Object * in the signal implementation.
The new tests segfault due bugs in the signal/slot implementation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The test case creates a receiver inheriting from Object, connects a
signal to one of its slot, moves the receiver to a different thread,
emits the signal and verifies that it gets delivered in the correct
thread with the expected value.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The Message class test creates a receiver inheriting from Object, moves
it to a different thread, sends a message to the receiver and verifies
that the message is delivered in the correct thread.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The Thread test case verifies that
- a Thread instance is created for the main thread
- a new Thread can be created, started, and stopped
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The IPA, IPC and Stream tests are self-contained so they can run in
parallel.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add tests of the ControlList infrastructure and public API.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Provide an initial test coverage for the ControlInfo class.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add initial basic testing for the new ControlValue class.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Test that the IPC supports sending data and file descriptors over the
IPC medium. To be able to execute the test two parts are needed, one
to drive the test and act as the libcamera (master) and a one to act as
the IPA (slave).
The master drives the testing posting requests to the slave to process
and sometimes respond to. A few different tests are performed.
- Master sends an array to the slave which responds with a reversed copy
of the array. The master verifies that a reversed array is returned.
- Master tries to send an empty message making sure that the send call
fails.
- Master sends a list of file descriptors and ask the slave to calculate
and respond with the sum of the size of the files. The master verifies
that the calculated size is correct.
- Master sends a pre-computed size and a list of file descriptors and
asks the slave to verify that the pre-computed size matches the sum of
the size of the file descriptors.
- Master sends two file descriptors and asks the slave to join the file
contents in a new file and respond with its file descriptor. The
master then verifies that the content of the returned file descriptor
matches the order of the original two files.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Timers should be automatically stopped and unregistered when deleted.
Add a test to verify this is the case.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
In preparation of creating a new V4L2Device base class, rename
V4L2Device to V4L2VideoDevice.
This is a project wide rename without any intended functional change.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Test that both discrete and range based stream format descriptions
result in good discrete frame sizes. The range based stream formats
needs to be fitted with a table of resolutions inside libcamera so if
that table is updated this test might need to be updated.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Replace all usage of FormatEnum with ImageFormats and completely
remove FormatEnum which is no longer needed.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a test to verify media bus codes, sizes and resolution retrieval
through the CameraSensor API based on the Sensor A in the vimc pipeline.
Also check that the getFormat() method returns the expected media bus
code and size.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Upstream commit 2978a505aaa981b2 ("media: vimc: stream: fix thread state
before sleep") changes the frame rate when capturing from the vimc raw
capture video nodes. The commit changes the frame rate from thousands of
frames per second to to roughly fifty.
The libcamera capture test was written with the assumption that vimc
would keep providing this fast frame rate and ran for a very short time
to decrease the overall run time of tests. This is no longer possible
and the test fails as it can't capture enough frames in its runtime,
increase the runtime to match the new vimc frame rate.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Three tests {capture,configuration_set,statemachine} override the
CameraTest::init() function, and call it as the first action.
However they were not checking the return value, and each of the tests
will segfault if the VIMC camera is not obtained.
Check the return value of the CameraTest base class initialisation and
return any errors to the test suite if initialisation fails.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Use the dummy IPA for testing/sample IPA instead of the earlier test
IPA. Remove the test IPA, and update tests and meson accordingly.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
IPAManager is a class that will search in given directories for IPA
modules, and will load them into a list. It also provides an interface
for pipeline handlers to acquire an IPA.
A meson build file for the IPAs is added, which also specifies a
hard-coded path for where to load the IPAs from in the installation
directory. More paths can be specified with the environment variable
LIBCAMERA_IPA_MODULE_PATH, with the same syntax as the regular PATH
environment variable. Make the test framework set this environment
variable.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We need a way to match pipelines with IPA modules, so add fields in
IPAModuleInfo to hold the IPA module API version number, the pipeline
name, and the pipeline version.
The module API version is used to determine the layout of struct
IPAModuleInfo.
Also update IPA module tests and Doxygen accordingly. Doxygen needs to
be updated to accomodate __attribute__((packed)).
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Define an IPAInterface class which will contain an IPA implementation.
The methods that the IPAInterface exposes form the interface to the IPA
implementation, hence the name. IPA module shared objects will implement
this class.
This also means that IPA module shared objects must be implemented in
C++, so remove the C test IPA module.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Argument name differs from definition and implementation, fix it by
renaming the definition. While at it make the argument const.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Instead of manually adding the libcamera library and include path to
every target that requires it, declare a dependency that groups the
headers as source, the library and the include path, and use it through
the project. This simplifies handling of the dependency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Consistently go for 4 spaces indentation, and always put a space between
the colon in argument lists, as per the examples from the meson
documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The CameraConfiguration class implements a simple storage of
StreamConfiguration with internal validation limited to verifying that
the stream configurations are not empty. Extend this mechanism by
implementing a smart validate() method backed by pipeline handlers.
This new mechanism changes the semantic of the camera configuration. The
Camera::generateConfiguration() operation still generates a default
configuration based on roles, but now also supports generating empty
configurations to be filled by applications. Applications can inspect
the configuration, optionally modify it, and validate it. The validation
implements "try" semantics and adjusts invalid configurations instead of
rejecting them completely. Applications then decide whether to accept
the modified configuration, or try again with a different set of
parameters. Once the configuration is valid, it is passed to
Camera::configure(), and pipeline handlers are guaranteed that the
configuration they receive is valid.
A reference to the Camera may need to be stored in the
CameraConfiguration derived classes in order to access it from their
validate() implementation. This must be stored as a std::shared_ptr<> as
the CameraConfiguration instances belong to applications. In order to
make this possible, make the Camera class inherit from
std::shared_from_this<>.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
To prepare for specialising the CameraConfiguration class in pipeline
handlers, return a pointer to a camera configuration instead of a
reference from Camera::generateConfiguration(). The camera configuration
always needs to be allocated from the pipeline handler, and its
ownership is passed to the application.
For symmetry, change Camera::configure() to take a CameraConfiguration
pointer instead of a reference. This aligns with our coding practice of
passing parameters that are modified by the callee by pointer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Refactor the CameraConfiguration structure to not rely on Stream
instances. This is a step towards making the camera configuration object
more powerful with configuration validation using "try" semantics.
The CameraConfiguration now exposes a simple vector-like API to access
the contained stream configurations. Both operator[]() and at() are
provided to access elements. The isEmpty() method is renamed to empty()
and the methods reordered to match the std::vector class.
As applications need access to the Stream instances associated with the
configuration entries in order to associate buffers with streams when
creating requests, expose the stream selected by the pipeline handler
through a new StreamConfiguration::stream().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
In order to prepare for an API overhall of the camera configuration
generation, remove the StreamUsage class and replace its uses by stream
roles. The size hints can't be specified anymore, and will be replaced
with an API on the StreamConfiguration to negotiate configuration
parameters with cameras.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Rename the configureStreams() and streamConfiguration() methods to
configure() and generateConfiguration() respectively in order to clarify
the API. Both methods deal with CameraConfiguration objects, and are
thus not limited to streams, even if a CameraConfiguration currently
contains streams only.
While at it, remove the qcam MainWindow::configureStreams() method that
is declared but never defined or used.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add tests to test the the IPAModule class, for loading the IPA module
info from IPA module .so shared objects, with modules written in both C
and C++.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The vimc driver delivers frames much faster then the vivid driver hence
most v4l2 device tests complete much quicker if vimc is used. The only
v4l2 device test which can't be switched is buffer_sharing as it needs
to import buffers somewhere, something vimc do not support.
With this change I manage to shave of almost 7 seconds for each run of
all v4l2 device tests.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When initializing the test reset any media links and set a know
resolutions. This is needed to put the device under test into known
state and not have the v4l2 device tests depend on that no one have
touched the device before the test is executed.
The resolution is picked purely at random and could possibly be moved to
each test case if there is a need for different resolutions for a
specific one.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Prepare for different tests which implements V4L2DeviceTest to specify
which media device and entity they wish to test. There is no functional
changes, all tests still use vivid to perform there tests.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Align the style of the formats test with the other v4l2_device tests by
impending the functions in the class definition instead of first
declaring the class and then implement the functions. There is no
functional change only restructuring of existing code to align with the
style of other tests.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Order the sections of a class public, protected and private. There is no
functional change only restructuring of existing code to align with the
style of other tests.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The interfaces MediaDevice::{open,close}() are about to be made private,
replace them with a test of MediaDevice::{acquire,release}() instead.
The new test will implicitly tests the open() and close() methods as
they are about to be move inside acquire() and release() which will
remain public.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Before adding more tests which will act on the vimc pipeline break out a
common base from media_device_link_test.cpp which already acts on vimc.
The new common base class will help reduce code duplication.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
To gain better control of when a file descriptor is open to the media
device and reduce the work needed in pipeline handler implementations,
handle the file descriptor in acquire() and release().
This changes the current behavior where a file descriptor is only open
when requested by the pipeline handler to that one is always open as
long a media device is acquired. This new behavior is desired to allow
implementing exclusive access to a pipeline handler between processes.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove the need for the caller to open and close the media device when
populating the MediaDevice. This is done as an effort to make the usage
of the MediaDevice less error prone and the interface stricter.
The rework also revealed and fixes a potential memory leak in
MediaDevice::populate() where resources would not be deleted if the
second MEDIA_IOC_G_TOPOLOGY would fail.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In preparation for adding more responsibility to MediaDevice::acquire()
remove unneeded calls to acquire() and release(), and make sure all
needed calls to acquire() are checked and acted on.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Name all instances of CameraConfiguration "config", and all instances of
StreamConfiguration "cfg" accross all tests.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Several of our structures include width and height fields that model a
size while we have a Size class for that purpose. Use the Size class
through libcamera, and give it a toString() method like other geometry
and format classes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The glibc read() and write() functions are defined with the
__warn_unused_result__ attribute when using FORTIFY_SOURCE. Don't ignore
their return value.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Member slots for objects deriving from the Object class receive special
handling. Add one test to make sure we exercise the related code paths.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Moving a temporary value prevents copy elision. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a method to retrieve the media entity associated with a subdevice.
The entityName() and deviceNode() methods are not needed anymore as they
can be accessed through the media entity, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a test that exercises all the comparison operators for the Size
class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Instead of storing four integers for the minimum and maximum width and
height in the SizeRange class, use two instance of the Size class for
the minimum and maximum sizes.
While it at replace the mention of image size with size in the SizeRange
documentation, as the Size class isn't limited to image sizes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Implement the camera configuration thru out the library, tests, cam and
qcam tools.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
