summaryrefslogtreecommitdiff
path: root/test
AgeCommit message (Collapse)Author
2021-12-03libcamera: Move file_descriptor.h to base/Laurent Pinchart
The FileDescriptor class is a generic helper that matches the criteria for the base library. Move it there. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-12-01test: gstreamer: Avoid call to deprecated gst_element_get_request_pad()Xavier Roumegue
gst_element_get_request_pad() is being replaced by gst_element_request_simple() since 1.19.1, throwing a warning in case of use until its definitive replacement on 1.20. Hence, prefer using gst_element_request_simple() in case gstreamer version is >= 1.19.1 to avoid the compilation error below (tested on f35): [258/391] Compiling C++ object test/gstreamer/multi_stream_test.p/gstreamer_multi_stream_test.cpp.o FAILED: test/gstreamer/multi_stream_test.p/gstreamer_multi_stream_test.cpp.o c++ -Itest/gstreamer/multi_stream_test.p -Itest/gstreamer -I../test/gstreamer -Itest/libtest -I../test/libtest -Iinclude -I../include -Iinclude/libcamera/ipa -Iinclude/libcamera -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/sysprof-4 -fdiagnostics-color=always -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Wnon-virtual-dtor -Wextra -Werror -std=c++17 -g -Wshadow -include config.h -pthread -DLIBCAMERA_BASE_PRIVATE -MD -MQ test/gstreamer/multi_stream_test.p/gstreamer_multi_stream_test.cpp.o -MF test/gstreamer/multi_stream_test.p/gstreamer_multi_stream_test.cpp.o.d -o test/gstreamer/multi_stream_test.p/gstreamer_multi_stream_test.cpp.o -c ../test/gstreamer/gstreamer_multi_stream_test.cpp ../test/gstreamer/gstreamer_multi_stream_test.cpp: In member function ‘virtual int GstreamerMultiStreamTest::run()’: ../test/gstreamer/gstreamer_multi_stream_test.cpp:90:76: error: ‘GstPad* gst_element_get_request_pad(GstElement*, const gchar*)’ is deprecated: Use 'gst_element_request_pad_simple' instead [-Werror=deprecated-declarations] 90 | g_autoptr(GstPad) request_pad = gst_element_get_request_pad(libcameraSrc_, "src_%u"); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/gstreamer-1.0/gst/gstbin.h:27, from /usr/include/gstreamer-1.0/gst/gst.h:35, from ../test/gstreamer/gstreamer_multi_stream_test.cpp:13: /usr/include/gstreamer-1.0/gst/gstelement.h:1042:25: note: declared here 1042 | GstPad* gst_element_get_request_pad (GstElement *element, const gchar *name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1plus: all warnings being treated as errors Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-12-01test: Replace "/proc/self/exe" with path to test binaryLaurent Pinchart
When tests are run under valgrind, /proc/self/exe points to valgrind, not to the test binary. This results in failures for tests that need to fork processes. Fix it by replacing "/proc/self/exe" with the path to the test binary. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-12-01test: Store path to the test executable in Test classLaurent Pinchart
Store the path to the test executable, found in argv[0], in the Test instance. This can be useful for tests that need to fork processes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-29test: camera: Fix trivial spelling mistakeJacopo Mondi
The error message should be: "Failed to associate buffer with request" Fix that. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-24test: Convert to pragma onceKieran Bingham
Remove the verbose #ifndef/#define/#endif pattern for maintaining header idempotency, and replace it with a simple #pragma once. This simplifies the headers, and prevents redundant changes when header files get moved. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
2021-11-02libcamera: bayer_format: Turn BayerFormat::Packing into scoped enumLaurent Pinchart
The unscoped enum BayerFormat::Packing leads to usage of the ambiguous BayerFormat::None enumerator. Turn the enumeration into a scoped enum to force usage of BayerFormat::Packing::None, and drop the now redundant "Packed" suffix for the CSI2 and IPU3 packing. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-15test: Remove using namespace in header filesHirokazu Honda
"using namespace" in a header file propagates the namespace to the files including the header file. So it should be avoided. This removes "using namespace" in header files in test. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-15libcamera: geometry: Add Size members to grown or shrink by a marginLaurent Pinchart
Add four new member functions to the Size class (two in-place and two const) to grow and shrink a Size by given margins. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-10-04test: gstreamer: Remove unnecessary header file includesVedant Paranjape
Remove header files which were not being used in the test code. The following headers were removed from the gstreamer_single_stream_test: - libcamera/base/utils.h - libcamera/internal/source_paths.h Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2021-09-27libcamera: control_serializer: Separate the handles spaceJacopo Mondi
Two independent instances of the ControlSerializer class are in use at the IPC boundaries, one in the Proxy class that serializes data from the pipeline handler to the IPA, and one in the ProxyWorker which serializes data in the opposite direction. Each instance operates autonomously, without any centralized point of control, and each one assigns a numerical handle to each ControlInfoMap it serializes. This creates a risk of potential collision on the handle values, as both instances will use the same numerical space and are not aware of what handles has been already used by the instance "on the other side". To fix that, partition the handles numerical space by initializing the control serializer with a seed according to the role of the component that creates the serializer and increment the handle number by 2, to avoid any collision risk. While this is temporary and rather hacky solution, it solves an issue with isolated IPA modules without too much complexity added. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-24test: gstreamer: Add a test for gstreamer multi streamVedant Paranjape
This patch adds a test to test if multi stream using libcamera's gstreamer element works. Test will run only on devices that support multistream capture, eg., devices that use IPU3 and raspberrypi pipeline. This was tested on a Raspberry Pi 4B+. Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-23test: v4l2_compat: Skip vimc as a test candidatePaul Elder
As the vimc scaler prevents us from passing v4l2-compliance, skip it until the fix has been merged. Instead of removing it from the supported_pipelines list, add an extra check, since we will have the same construct later when we check for the kernel version. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-23test: gstreamer: Simplify elements' ownershipsVedant Paranjape
In gstreamer, when elements are created, usually a floating [1] reference is returned which simply means, there is no ownership transfer (yet). Once can simply check for NULL and return through an error path, without bothering to clean up. Hence, g_autoptr is not much of help here. If the NULL checks have been passed successfully, elements are ready to use. However, we must claim ownership/reference it before using them via g_object_ref_sink(). This patch build upon this principle and removes the g_autoptr from gstreamer test base class (gstreamer_test.cpp) whereever necessary to tide up the code. [1] https://gstreamer.freedesktop.org/documentation/additional/design/MT-refcounting.html?gi-language=c#refcounting1 Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-23test: gstreamer: Simplify single stream test using functions from GstUtilsVedant Paranjape
Simplify memory handling and complexity of the test by using gst_parse_bin_from_description_full [1]. [1]: https://gstreamer.freedesktop.org/documentation/gstreamer/gstutils.html?gi-language=c#gst_parse_bin_from_description_full Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-23test: gstreamer_single_stream_test: Fix memory leakVedant Paranjape
The test hold a valid reference to convert0_ and sink0_ but not released. This results in a memory leak and can be checked via valgrind. Drop the references with test cleanup() virtual function. Valgrind log (glib and gst suppression files were used): ==345380== LEAK SUMMARY: ==345380== definitely lost: 1,688 bytes in 2 blocks ==345380== indirectly lost: 7,069 bytes in 42 blocks The patch fixes the leaks reported by valgrind above to: ==348870== LEAK SUMMARY: ==348870== definitely lost: 0 bytes in 0 blocks ==348870== indirectly lost: 0 bytes in 0 blocks Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-19test: v4l2_compat: Report test as skipped if no compatible driver foundLaurent Pinchart
The V4L2 compatibility layer test includes a list of supported devices, as V4L2 compatibility isn't officially supported with all devices yet. If no supported device is present, the test reports success, while it actually hasn't run. Report it being skipped in that case. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-15test: serialization: Prevent parallelisationKieran Bingham
The ipa_data_serializer_test is configured to be able to run in parallel with other tests. If the test tries to acquire the VIMC sensor B while it is in use, it would skip require skipping the test. Instead, inform meson that it can not be run in parallel to ensure that the test is able to obtain the resources it requires for execution. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-10test: v4l2_compat_test: Fix v4l2-compliance version parsingPaul Elder
v4l2-compliance changed their version string: v4l2-compliance 1.21.0-4618 v4l2-compliance SHA: cc211b76476aca2c072ffa83a9b003957d5f3909, 64 bits, 64-bit time_t v4l2-compliance 1.21.0-4838, 64 bits, 64-bit time_t The current parsing takes the last result of split, which works for the former, but not the latter. Take the second result of split instead, and strip away any commas. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-09test: gstreamer: Fix the destructor of GstreamerTest base classVedant Paranjape
The destructor tried to check if pipeline_ is a parent of libcameraSrc_. This was needed to be checked as if it is, cleanup of libcameraSrc_ would be handled by pipeline itself. Since, the destructor can be called anytime, even when pipeline_ hasn't been created, the use of pipeline_ to check if libcameraSrc_ has an ancestor as pipeline_ caused a segmentation fault. Fixes: f58768092277 ("test: gstreamer: Fix the destructor of GstreamerTest base class") Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-08test: gstreamer: Factor out code into a base classVedant Paranjape
A lot of code used in the single stream test is boiler plate and common across every gstreamer test. Factor out this code into a base class called GstreamerTest. Also update the gstreamer_single_stream_test to use the GstreamerTest base class. Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-07libcamera: v4l2_videodevice: Drop toV4L2PixelFormat()Laurent Pinchart
The V4L2VideoDevice::toV4L2PixelFormat() function is incorrectly implemented, as it will pick a multi-planar format if the device supports the multi-planar API, even if only single-planar formats are supported. This currently works because the implementation calls V4L2PixelFormat::fromPixelFormat(), which ignores the multiplanar argument and always returns a single-planar format. Fixing this isn't trivial. As we don't need to support multi-planar V4L2 formats at this point, drop the function instead of pretending everything is fine, and call V4L2PixelFormat::fromPixelFormat() directly from pipeline handlers. As the single-planar case is the most common, set the multiplanar argument to false by default to avoid long lines. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-09-07libcamera: base: utils: Use size_t for index in utils::enumerate()Laurent Pinchart
The index generated by utils::enumerate() is an iteration counter, which should thus be positive. Use std::size_t instead of the difference_type of the container. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-09-02libcamera: Drop emitter object pointer from signal argumentsLaurent Pinchart
Many signals used in internal and public APIs carry the emitter pointer as a signal argument. This was done to allow slots connected to multiple signal instances to differentiate between emitters. While starting from a good intention of facilitating the implementation of slots, it turned out to be a bad API design as the signal isn't meant to know what it will be connected to, and thus shouldn't carry parameters that are solely meant to support a use case specific to the connected slot. These pointers turn out to be unused in all slots but one. In the only case where it is needed, it can be obtained by wrapping the slot in a lambda function when connecting the signal. Do so, and drop the emitter pointer from all signals. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-09-02libcamera: Don't use emitter object pointer argument to slotLaurent Pinchart
In many cases, the emitter object passed as a pointer from signals to slots is also available as a class member. Use the class member when this occurs, to prepare for removal of the emitter object pointer from signals. In test/event.cpp, this additionally requires moving the EventNotifier to a class member. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-09-02libcamera: base: signal: Support connecting signals to functorsLaurent Pinchart
It can be useful to connect a signal to a functor, and in particular a lambda function, while still operating in the context of a receiver object (to support both object-based disconnection and queued connections to Object instances). Add a BoundMethodFunctor class to bind a functor, and a corresponding Signal::connect() function. There is no corresponding disconnect() function, as a lambda passed to connect() can't be later passed to disconnect(). Disconnection typically uses disconnect(T *object), which will cover the vast majority of use cases. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-09-02libcamera: Use simpler Signal::disconnect() functionLaurent Pinchart
When disconnecting a signal from a receiver, it is usually not necessary to specify the receiver's slot function explicitly, as the signal is often connected to a single slot for a given receiver. We can thus use a simpler version of Signal::disconnect() that takes a pointer to the receiver object only. This reduces code size, as the disconnect() function is a template function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-09-01test: v4l2_compat: Disable test when ASan is enabledLaurent Pinchart
The V4L2 compat test runs v4l2-ctl and v4l2-compliance with v4l2-compat.so preloaded. If libcamera is compiled with the address sanitizer enabled, the ASan library will be loaded due to preloading v4l2-compat.so. This however doesn't occur early enough in the dynamic linking process due to the v4l2 executables not being themselves linked to the ASan runtime, which causes ASan to abort with ==2198==ASan runtime does not come first in initial library list; you should either link runtime to your application or manually preload it with LD_PRELOAD. Using LD_PRELOAD to load the ASan runtime would fix this issue, but it requires knowing the absolute path to the ASan shared object. This is compiler-dependent and for clang, architecture-dependent as well. Until we figure out how to safely retrieve that information, disable the test when ASan is enabled as a quick fix. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-08-31libcamera: camera_sensor: Transform CameraSensor::sizes()Umang Jain
In CameraSensor, the mbusCodes() and sizes() accessor functions retrieves all the supported media bus codes and the supported sizes respectively. However, this is quite limiting since the caller probably isn't in a position to match which range of sizes are supported for a particular mbusCode. Hence, the caller is most likely interested to know about the sizes supported for a particular media bus code. This patch transforms the existing CameraSensor::sizes() to CameraSensor::sizes(mbuscode) to achieve that goal. The patch also transforms existing CIO2Device::sizes() in IPU3 pipeline handler to CIO2Device::sizes(PixelFormat) on a similar principle. The function is then plumbed to CameraSensor::sizes(mbusCode) to enumerate the per-format sizes as required in PipelineHandlerIPU3::generateConfiguration(). Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-26test: gstreamer: Disable gstreamer registry forksVedant Paranjape
ASan needs to be loaded first before gstreamer is loaded. This was not possible, so verify_asan_link_order was disabled. Better way to tackle this issue was disabling forks on the gstreamer side. verify_asan_link_order=0 disables the check on ASan side which checks if ASan was loaded before any other shared objects. Since, gstreamer spawns a child helper process while building the registry, we needed to disable this check. But with gst_registry_fork_set_enabled() it is possible to disable spawning this child helper process, so this ensures that ASan is loaded before any other shared object is loaded. Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-26test: gstreamer: Clean up memory managementVedant Paranjape
This patch simplifies memory management, i.e., by replacing bare pointers with g_autoptr or g_autofree according to use case. While at it also update time representation of timeout variable with GST_SECOND. Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-19ipa: Use FileDescriptor instead of int in layers above IPC payloadPaul Elder
Regarding (de)serialization in isolated IPA calls, we have four layers: - struct - byte vector + fd vector - IPCMessage - IPC payload The proxy handles the upper three layers (with help from the IPADataSerializer), and passes an IPCMessage to the IPC mechanism (implemented as an IPCPipe), which sends an IPC payload to its worker counterpart. When a FileDescriptor is involved, previously it was only a FileDescriptor in the first layer; in the lower three it was an int. To reduce the risk of potential fd leaks in the future, keep the FileDescriptor as-is throughout the upper three layers. Only the IPC mechanism will deal with ints, if it so wishes, when it does the actual IPC. IPCPipeUnixSocket does deal with ints for sending fds, so the conversion between IPCMessage and IPCUnixSocket::Payload converts between FileDescriptor and int. Additionally, change the data portion of the serialized form of FileDescriptor to a 32-bit unsigned integer, for alightnment purposes and in preparation for conversion to an index into the fd array. Also update the deserializer of FrameBuffer::Plane accordingly. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-08-19test: camera: Camera reconfiguration and fd-leak testUmang Jain
Development and usage of isolated IPA's has identified bugs in the transmission of the file descriptors between the pipeline handler and the IPA through. Add tests to identify these bugs and prevent regressions. This tests basically checks for two things: - Camera reconfigurations without stopping CameraManager - Fd leaks across IPA IPC boundary [1] Currently, it uses vimc, but can be easily changed to using another platform (for e.g. IPU3) by changing kCamId_ and kIpaProxyName_. The test performs kNumOfReconfigures_ (currently set to 10) reconfigurations of the camera. Each reconfiguration runs start(), capture(100ms), stop() of the camera. Hence, the test runs approximately for 1 second. For checking the fd leaks, the test monitors the /proc/$PROXY_PID/fd directory for open fds. It compares the number of open fds after each run to the number of open fds before the first run. If those two are found to be mis-matched, the test shall report failure. The test validates IPA IPC code paths which are used when the IPA is run in isolated mode. The CameraTest is constructed with the isolate flag set to enforce this. [1] https://bugs.libcamera.org/show_bug.cgi?id=63 Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-19libtest: camera_test: Plumb constructor to set LIBCAMERA_IPA_FORCE_ISOLATIONUmang Jain
Some tests might require to have LIBCAMERA_IPA_FORCE_ISOLATION set to ensure they can test the IPA running in isolated mode. These tests are likely to leverage CameraTest. The environment variable should be set before CameraManager::start() call which happens in CameraTest's constructor. Hence, plumb the constructor with a flag so that the LIBCAMERA_IPA_FORCE_ISOLATION can be set before CameraManager::start(). Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-14test: gstreamer: Add test for gstreamer single streamVedant Paranjape
This patch adds a test to test if single stream using libcamera's gstreamer element works. We need to work around two distinct issues with ASan when enabled in the build: - glib has a known leak at initialization time. This is covered by the suppression file shipped with glib, but it's not clear how to use it automatically. For now, disable leak detection to avoid test failures. - GStreamer spawns a child process to scan plugins. If GStreamer is compiled without ASan (which is likely) but libcamera is, dlopen()ing the libcamera plugin will cause an ASan link order verification failure. Disable the verification child processes to work around the problem. This requires gcc 8 or newer. Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-12test: control serialization: Test lookup by ControlIdJacopo Mondi
Test that lookup by ControlId reference works in the control serialization test making sure that the control limits are not changed by de-serialization. The test currently fails and demonstates that lookup by ControlId is currently not supported until the introduction of the next patch. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-12libcamera: controls: Create ControlInfoMap with ControlIdMapJacopo Mondi
ControlInfoMap does not have a ControlId map associated, but rather creates one with the generateIdMap() function at creation time. As a consequence, when in the need to de-serialize a ControlInfoMap all the ControlId it contains are created by the deserializer instance, not being able to discern if the controls the ControlIdMap refers to are the global libcamera controls (and properties) or instances local to the V4L2 device that has first initialized the controls. As a consequence the ControlId stored in a de-serialized map will always be newly created entities, preventing lookup by ControlId reference on a de-serialized ControlInfoMap. In order to make it possible to use globally available ControlId instances whenever possible, create ControlInfoMap with a reference to an externally allocated ControlIdMap instead of generating one internally. As a consequence the class constructors take and additional argument, which might be not pleasant to type in, but enforces the concepts that ControlInfoMap should be created with controls part of the same id map. As the ControlIdMap the ControlInfoMap refers to needs to be allocated externally: - Use the globally available controls::controls (or properties::properties) id map when referring to libcamera controls - The V4L2 device that creates ControlInfoMap by parsing the device's controls has to allocate a ControlIdMap - The ControlSerializer that de-serializes a ControlInfoMap has to create and store the ControlIdMap the de-serialized info map refers to Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-10libcamera: MappedFrameBuffer: Use typed Flags<MapModes>Kieran Bingham
Remove the need for callers to reference PROT_READ/PROT_WRITE directly from <sys/mman.h> by instead exposing the Read/Write mapping options as flags from the MappedFrameBuffer class itself. While here, introduce the <stdint.h> header which is required for the uint8_t as part of the Plane. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-10libcamera: Give MappedFrameBuffer its own implementationKieran Bingham
The MappedFrameBuffer is a convenience feature which sits on top of the FrameBuffer and facilitates mapping it to CPU accessible memory with mmap. This implementation is internal and currently sits in the same internal files as the internal FrameBuffer, thus exposing those internals to users of the MappedFramebuffer implementation. Move the MappedFrameBuffer and MappedBuffer implementation to its own implementation files, and fix the sources throughout to use that accordingly. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-09libcamera: Rename 'method' to 'function'Laurent Pinchart
Usage of 'method' to refer to member functions comes from Java. The C++ standard uses the term 'function' only. Replace 'method' with 'function' or 'member function' through the whole code base and documentation. While at it, fix two typos (s/backeng/backend/). The BoundMethod and Object::invokeMethod() are left as-is here, and will be addressed separately. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-03libcamera: file: Turn MapFlag and OpenModeFlag into enum classLaurent Pinchart
Add type safety by turning the MapFlag and OpenModeFlag enum into enum class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-03test: Add tests for the Flags classLaurent Pinchart
Add tests that exercise the whole API of the Flags class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2021-08-02controls: Add boolean constructors for ControlInfoPaul Elder
It would be convenient to be able to iterate over available boolean values, for example for controls that designate if some function can be enabled/disabled. The current min/max/def constructor is insufficient, as .values() is empty, so the values cannot be easily iterated over, and creating a Span of booleans does not work for the values constructor. Add new constructors to ControlInfo that takes a set of booleans (if both booleans are valid values) plus a default, and another that takes only one boolean (if only one boolean is a valid value). Update the ControlInfo test accordingly. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-07-11libcamera: buffer: Rename buffer.h to framebuffer.hLaurent Pinchart
libcamera names header files based on the classes they define. The buffer.h file is an exception. Rename it to framebuffer.h. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-07-11test: message: Test recursive Thread::dispatchMessages() callsLaurent Pinchart
The Thread::dispatchMessages() function needs to support recursive calls, for instance to allow flushing delivery of invoked methods. Add a corresponding test, which currently fails with a double free. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-07-06libcamera: camera: Make stop() idempotentNícolas F. R. A. Prado
Make Camera::stop() idempotent so that it can be called in any state and consecutive times. When called in any state other than CameraRunning, it is a no-op. This simplifies the cleanup path for applications. Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-06-25test: Ensure LIBCAMERA_BASE_PRIVATE isn't publicKieran Bingham
If LIBCAMERA_BASE_PRIVATE is ever exposed on the libcamera public dependencies, then the private.h header protection will be circumvented. Provide a test which will fail (at compile time) if the LIBCAMERA_BASE_PRIVATE define ever leaks to the public dependencies. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-25libcamera: rename public libcamera dependencyKieran Bingham
Now that we have a libcamera_private, make the public only dependency libcamera_public so that it is clear which interface is being linked. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-25libcamera/base: Validate internal headers as privateKieran Bingham
Headers which must not be exposed as part of the public libcamera API should include base/private.h. Any interface which includes the private.h header will only be able to build if the libcamera_private dependency is used (or the libcamera_base_private dependency directly). Build targets which are intended to use the private API's will use the libcamera_private to handle the automatic definition of the inclusion guard. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-25libcamera/base: Move span to base libraryKieran Bingham
Move span, and adjust the Doxygen exclusion as well. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>