summaryrefslogtreecommitdiff
path: root/src/ipa/raspberrypi/controller
AgeCommit message (Collapse)Author
2022-11-21ipa: raspberrypi: Remove generic "pause" mechanism from AlgorithmNick Hollinghurst
No existing Algorithm used the base pause(), resume() functions or the paused_ flag, nor is there a need for a generic pause API. Remove these. The AGC and AWB algorithms now have methods named disableAuto(), enableAuto() which better describe their functionality. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-28ipa: raspberrypi: awb: Update colour temperature whenever manual gains changeDavid Plowman
Previously we only did this when the system starts (on the first switch_mode). Now we do it whenever the manual colour gains are updated. To facilitate this, this R/B vs. colour temperature inverse functions are stored persistently in the AwbConfig. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-10-28ipa: raspberry: replace abs() with std::abs()Nicholas Roth
pwl.cpp uses abs() instead of std::abs(), which causes unexpected behavior in the Clang compiler used for Android. Replace with C++-standard absolute value function std::abs(), which supports double-precision absolute values in a standard way. Signed-off-by: Nicholas Roth <nicholas@rothemail.net> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-10-28ipa: add missing thread-safety annotationsNicholas Roth
The raspberrypi IPA is missing thread-safety annotations, which breaks the build. Add required thread-safety annotations. ../src/ipa/raspberrypi/controller/metadata.h:108:31: error: mutex 'mutex_' is still held at the end of function [-Werror,-Wthread-safety-analysis] void lock() { mutex_.lock(); } ^ ../src/ipa/raspberrypi/controller/metadata.h:108:23: note: mutex acquired here void lock() { mutex_.lock(); } ^ ../src/ipa/raspberrypi/controller/metadata.h:109:25: error: releasing mutex 'mutex_' that was not held [-Werror,-Wthread-safety-analysis] void unlock() { mutex_.unlock(); } ^ Signed-off-by: Nicholas Roth <nicholas@rothemail.net> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-10-18ipa: raspberrypi: Add line length to DeviceStatusNaushir Patuck
Add a lineLength field to the DeviceStatus structure to store the line length used for a particular frame. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18ipa: raspberrypi: Add pixel clock rate to the CameraMode structureNaushir Patuck
The pixel clock rate will be used in subsequent commits to calculate line length durations. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18ipa: raspberrypi: Add minimum and maximum line length fields to CameraModeNaushir Patuck
Add fields for minimum and maximum line length duration to the CameraMode structure. This replaces the existing lineLength field. Any use of the existing lineLength field is replaced by the new minLineLength field, as logically we always want to use the fastest sensor readout by default. As a drive-by cosmetic change, split all fields in the CameraMode structure into separate lines. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-29ipa: raspberry: awb: Include <functional>Jacopo Mondi
Building on gcc8 on Debian 10 fails with asyncThread_ = std::thread(std::bind(&Awb::asyncFunc, this)); ../src/ipa/raspberrypi/controller/rpi/awb.cpp:177:34: note: ‘std::bind’ is defined in header ‘<functional>’; did you forget to ‘#include <functional>’? Fix that by including <functional> in awb.cpp. Fixes: c1597f989654 ("ipa: raspberrypi: Use YamlParser to replace dependency on boost") Reported-by: https://buildbot.libcamera.org/#/builders/6/builds/414 Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-28ipa: raspberrypi: Add functional include to pwl.hEric Curtin
The Pwl class uses std::function, defined in <functional>, without including the header directly. This results in a compilation error with the Fedora 36 compiler toolchain (gcc 12.1.1): In file included from ../src/ipa/raspberrypi/controller/rpi/awb.h:14, from ../src/ipa/raspberrypi/controller/rpi/awb.cpp:14: ../src/ipa/raspberrypi/controller/rpi/../pwl.h:97:18: error: 'std::function' has not been declared 97 | void map(std::function<void(double x, double y)> f) const; | ^~~ Fix it by including <functional>. Fixes: c1597f989654 ("ipa: raspberrypi: Use YamlParser to replace dependency on boost") Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: raspberrypi: Remove unused Controller constructorNaushir Patuck
The Controller(char const *jsonFilename) is not valid anymore since Controller::read() can now return an error on a failure. Additionally, this constructor is not actually used, so remove it. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: raspberrypi: agc: Use YamlObject::getList()Laurent Pinchart
Replace the manual implementation of the readList() functions with YamlObject::getList(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com>
2022-07-28ipa: raspberrypi: Introduce version 2.0 format for the camera tuning fileNaushir Patuck
The existing tuning file format (version 1.0) requires the controller algorithms to run in the same order as listed in the JSON structure. The JSON specification does not mandate any such ordering, but the Boost JSON parser would maintain this order. In order to remove this reliance on the parser to provide ordering, introduce a new version 2.0 format for the camera tuning file. In this version, the algorithms are specified in a top level list node ("algorithms"), which does require strict ordering of the elements. A "version" node is added to distinguish between the version 1.0 and 2.0 formats. The absence of the "version" node implies version 1.0. A "target" node is also added to specify the target platform for this configuration. Update the controller to support either version of the tuning file by looking at the version node. CreateAlgorithm member function to now load and configure each algorithm. Additionally, make CreateAlgorithm a private member, it does not get called externally. If a version 1.0 format tuning file is used, throw a warning message indicating it will be soon deprecated. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: raspberrypi: Use YamlParser to replace dependency on boostLaurent Pinchart
The Raspberry Pi IPA module depends on boost only to parse the JSON tuning data files. As libcamera depends on libyaml, use the YamlParser class to parse those files and drop the dependency on boost. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2022-07-28ipa: raspberrypi: Replace Fatal log by error propagationLaurent Pinchart
Replace the Fatal log messages that cause an abort during tuning data read with Error messages and proper error propagation to the caller. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com>
2022-07-28ipa: raspberrypi: Propagate errors from AGC metering tuning data readLaurent Pinchart
Update the AGC metering functions that deal with reading tuning data to propagate errors to the caller, using std::tie and std::tuple to group the error code and return value. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com>
2022-07-28ipa: raspberrypi: Return an error code from Algorithm::read()Laurent Pinchart
When encountering errors, the Algorithm::read() function either uses LOG(Fatal) or throws exceptions from the boost property_tree functions. To prepare for replacing boost JSON parse with the YamlParser class, give the Algorithm::read() function the ability to return an error code, and propagate it all the way to the IPA module init() function. All algorithm classes return a hardcoded 0 value for now, subsequent commits will change that. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com>
2022-07-27ipa: raspberrypi: agc: Fix log message prefixesNaushir Patuck
Remove "Agc:" as that gets prefixed by the logging system. s/AgcConfig/AgcMeteringMode/ and s/AgcConfig/AgcMeteringMode where appropriate. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-27ipa: raspberrypi: Remove #define constantsNaushir Patuck
Replace all #define constant values with equivalent constexpr definitions. As a drive-by, remove the CAMERA_MODE_NAME_LEN constant as it is unused. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-27ipa: raspberryip: Remove all exception throw statementsNaushir Patuck
Replace all exception throw statements with LOG(RPi*, Fatal) error messages. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-27raspberrypi: Update Copyright statement in all Raspberry Pi source filesNaushir Patuck
s/Raspberry Pi (Trading) Limited/Raspberry Pi Ltd/ to reflect the new Raspberry Pi entity name. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-27ipa: raspberrypi: Rename header files from *.hpp to *.hNaushir Patuck
As per the libcamera coding guidelines, rename all .hpp header files to .h. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-27ipa: raspberrypi: Remove extern "C" declarationsNaushir Patuck
Since the controller header files are now C++ specific, remove the extern "C" declarations. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-27ipa: raspberrypi: Change to C style code commentsNaushir Patuck
As part of the on-going refactor efforts for the source files in src/ipa/raspberrypi/, switch all C++ style comments to C style comments. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-27ipa: raspberrypi: Code refactoring to match style guidelinesNaushir Patuck
Refactor all the source files in src/ipa/raspberrypi/ to match the recommended formatting guidelines for the libcamera project. The vast majority of changes in this commit comprise of switching from snake_case to CamelCase, and starting class member functions with a lower case character. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-29ipa: raspberrypi: Use std::optional in DeviceStatusNaushir Patuck
Switch the aperture, lens_position, and flash_intensity fields in the DeviceStatus structure to use std::optional instead of using invalid default values. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-29ipa: raspberrypi: Add sensor temperature to DeviceStatusNaushir Patuck
Add an optional sensor_temperature field to the DeviceStatus structure. If a temperature measurement is available for a frame, the value is returned out through the SensorTemperature control in the Request metadata. Additionally, provide the sensor temperature value from the std::ostream &operator<< overload. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-06ipa: raspberrypi: alsc: Limit the calculated lambda valuesNaushir Patuck
Under the right circumstances, the alsc calculations could spread the colour errors across the entire image as lambda remains unbound. This would cause the corrected image chroma values to slowly drift to incorrect values. This change adds a config parameter (alsc.lambda_bound) that provides an upper and lower bound to the lambda value at every stage of the calculation. With this change, we now adjust the lambda values so that the average across the entire grid is 1 instead of normalising to the minimum value. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-02-08ipa: raspberrypi: awb: Better handling of how we disable AWBDavid Plowman
We now handle disabling ("pausing") AWB in the same way as AEC/AGC. Instead of letting the pause flag be set so that the code never runs at all, we instead fix the manual settings to the current values (but continue to be called). The algorithm does not restart any calculations in this state, but continues to add AWB metadata to every frame. Therefore certain other algorithms that want to know it (CCM and ALSC, for example) can still find it. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-15ipa: raspberrypi: agc: Remove using namespace in agc.hppHirokazu Honda
"using namespace" in a header file propagates the namespace to the files including the header file. So it should be avoided. This removes "using namespace" in agc.hpp. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-17ipa: raspberrypi: Fix bcm2835-isp inclusion type.Kieran Bingham
The bcm2835-isp.h is included with quotes rather than angle brackets. Quoted includes is reserved for internal includes, while the linux/bcm2835-isp.h header is exported from the Linux kernel. Fix the inclusion type. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-09libcamera: Rename 'method' to 'function'Laurent Pinchart
Usage of 'method' to refer to member functions comes from Java. The C++ standard uses the term 'function' only. Replace 'method' with 'function' or 'member function' through the whole code base and documentation. While at it, fix two typos (s/backeng/backend/). The BoundMethod and Object::invokeMethod() are left as-is here, and will be addressed separately. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-05ipa: raspberrypi: AGC: handle modes with different sensitivitiesDavid Plowman
When the sensor is switched to a mode with a different sensitivity, the target exposure values need to be adjusted proportionately to maintain the same image brightness. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-05ipa: raspberrypi: Add sensitivity field to camera modeDavid Plowman
We use the CamHelper class to initialise it to the usual value of 1. The CamHelper's GetModeSensitivity method can be redefined to implement a different behaviour for sensors that require it. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-07-14ipa: raspberrypi: Remove unused MetadataPtrJean-Michel Hautbois
The Metadata class defines a shared_ptr named MetadataPtr. It is not used anywhere in the source code, so remove it. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2021-07-12ipa: raspberrypi: Add frame_length to DeviceStatusNaushir Patuck
Store the frame length into the DeviceStatus struct. The value is extracted from embedded data when available, or calculated from the VBLANK value passed from DelayedControls otherwise. Update imx477 and imx219 CamHelper classes to extract the frame length from the embedded data buffer. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-07-12ipa: raspberrypi: Add an operator<< to struct DeviceStatusNaushir Patuck
Add an operator<< overload to log all fields in DeviceStatus, and remove the manual logging statements in the IPA and CamHelper. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-07-12ipa: raspberrypi: Add a constructor struct DeviceStatusNaushir Patuck
The constructor sets all fields to 0. This replaces the memset(0) and default value initialisation usage in the agc and lux controllers respectively. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-07-12ipa: raspberrypi: Make device_status.h C++ only header, and update commentsNaushir Patuck
This header file is no longer C compatible, so remove the extern "C" declaration. Replace C++ style comments with C style based on libcamera guidelines. There are no functional changes in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-28libcamera: ipa: raspberrypi: Demote warnings about lack of AWB resultsDavid Plowman
Warnings about the lack of AWB status results are demoted to being just "Debug". With monochrome sensors becoming more common this would otherwise overwhelm the console output, and in practice nothing is really lost as it is normally very evident if AWB is failing to run. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-25libcamera/base: Move extended base functionalityKieran Bingham
Move the functionality for the following components to the new base support library: - BoundMethod - EventDispatcher - EventDispatcherPoll - Log - Message - Object - Signal - Semaphore - Thread - Timer While it would be preferable to see these split to move one component per commit, these components are all interdependent upon each other, which leaves us with one big change performing the move for all of them. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-25libcamera/base: Move utils to the base libraryKieran Bingham
Move the utils functionality to the libcamera/base library. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-08ipa: raspberrypi: Switch the AGC/Lux code to use utils::DurationNaushir Patuck
Convert the core AGC and Lux controller code to use utils::Duration for all exposure time related variables and calculations. Convert the exposure/shutter time fields in AgcStatus and DeviceStatus to use utils::Duration. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-08ipa: raspberrypi: Switch AgcAlgorithm API to use utils::DurationNaushir Patuck
Switch the AgcAlgorithm API functions to use utils::Duration for all time based variables. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-08ipa: raspberrypi: Switch ipa and cam_helper to use utils::DurationNaushir Patuck
Switch the ipa and cam_helper code to use libcamera::utils::Duration for all time based variables. This improves code readability and avoids possible errors when converting between time bases. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Add a Merge method to RPiController::MetadataNaushir Patuck
Add a new Merge method to the Metadata class. This will merge all unique key/value pairs from a source metadata map to the destination map. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Add move/copy ctors and operators to Metadata classNaushir Patuck
Add a default, move and copy constructor as well as a move operator implementation RPiController::Metadata class. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Switch to std::scoped_lock in the Metadata classNaushir Patuck
Replace std::lock_guard with std::scoped_lock. When locking a single mutex, both are functionally the same. When locking two mutexes in the operator= overload, the scoped_lock uses a deadlock avoidance algorithm to avoid deadlock. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Reformat RPiController::Metadata class headerNaushir Patuck
Rearrange header includes to be in alphabetical order. Add whitespace to class definition to match libcamera coding guidelines. Fix a typo in the comment showing an example of scoped locks. There are no functional changes in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-26ipa: raspberrypi: AWB: Ignore invalid statistics zones correctlyDavid Plowman
Regions of the image where the statistics are not trusted should not be put in the zones_ list. This also means that the AWB may fail to run initially, so async_results_ needs to be initialised to some kind of default. Finally, the RGB zone structures can be zero-initialised safely now, the previous value of -1 would seem unusual. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-26ipa: raspberrypi: AWB: Remove unused codeDavid Plowman
Some more code from pre-libcamera versions is removed. There is no functional change. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-06-28 20:36:18 +0000