summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-10v4l2: v4l2_camera_proxy: Use stream config in tryFormatPaul Elder
For handling try_fmt, the values should be filled in by validating the stream configuration, and not by recalculating them or manually checking against the cached list of formats and sizes. Add a new V4L2Camera::validateConfiguration() function to validate a configuration and use it to obtain size, format, stride, and frameSize values. If the format negotiation fails, return error from try_fmt and s_fmt. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10v4l2: v4l2_camera_proxy: Get stride and frameSize from stream configPaul Elder
The stride and frameSize should be obtained through StreamConfiguration rather than PixelFormatInfo, as pipeline handlers might have different values (eg. for alignment). Get the stride and frameSize values from StreamConfiguration instead of from PixelFormatInfo. This removes the need for V4L2CameraProxy's calculation helper functions (bplMultiplier, imageSize, v4l2ToDrm, drmToV4L2, calculateSizeImage) and formats, so remove them. This also removes the need for V4L2CameraProxy::calculateSizeImage, so remove it,. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10v4l2: v4l2_camera: Fix stream selection for buffer operationsPaul Elder
The buffer operations in V4L2Camera were getting the stream from the wrong place. Fix it. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-10libcamera: StreamConfiguration: Update stride documentationPaul Elder
Now that all the pipeline handlers fill in the stride information at validation time, update the documentation accordingly. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-10libcamera: vimc: Fill stride and frameSize at config validationPaul Elder
Fill the stride and frameSize fields of the StreamConfiguration at configuration validation time instead of at camera configuration time. This allows applications to get the stride when trying a configuration without modifying the active configuration of the camera. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-10libcamera: uvcvideo: Fill stride and frameSize at config validationPaul Elder
Fill the stride and frameSize fields of the StreamConfiguration at configuration validation time instead of at camera configuration time. This allows applications to get the stride when trying a configuration without modifying the active configuration of the camera. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-10libcamera: simple: Fill stride and frameSize at config validationPaul Elder
Fill the stride and frameSize fields of the StreamConfiguration at configuration validation time instead of at camera configuration time. This allows applications to get the stride when trying a configuration without modifying the active configuration of the camera. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-10libcamera: rkisp1: Fill stride and frameSize at config validationPaul Elder
Fill the stride and frameSize fields of the StreamConfiguration at configuration validation time instead of at camera configuration time. This allows applications to get the stride when trying a configuration without modifying the active configuration of the camera. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: raspberrypi: Fill stride and frameSize at config validationPaul Elder
Fill the stride and frameSize fields of the StreamConfiguration at configuration validation time instead of at camera configuration time. This allows applications to get the stride when trying a configuration without modifying the active configuration of the camera. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: ipu3: Fill stride and frameSize at config validationPaul Elder
Fill the stride and frameSize fields of the StreamConfiguration at configuration validation time instead of at camera configuration time. This allows applications to get the stride when trying a configuration without modifying the active configuration of the camera. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: pipeline: uvcvideo: Filter out unsupported formatsPaul Elder
Unsupported formats should not be added to the configuration when generating the configuration. Filter them out. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-10libcamera: pipeline: raspberrypi: Filter out unsupported formatsPaul Elder
Unsupported formats should not be added to the configuration when generating the configuration. Filter them out. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: pipeline_handler: Fatal if registering camera without media devicesPaul Elder
Pipeline handlers must acquire media devices via PipelineHander::acquireMediaDevice so that the media devices can be registered with the pipeline handler, so that they can be automatically added to the devnum map for the v4l2 compatibility layer to use. Die fatally if any camera trying to be registered has not acquired any media devices via acquireMediaDevice. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: pipeline: raspberrypi: Acquire media devices with acquireMediaDevicePaul Elder
Media devices should be acquired by pipeline handlers via PipelineHandler::acquireMediaDevice so that the media devices can be registered in the pipeline handler so that they can be automatically added to the devnum map for the v4l2 compatibility layer to use. Make the raspberrypi pipeline handler do this. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: pipeline: raspberrypi: Simplify format fetchingPaul Elder
Simplify code for looking up PixelFormatInfo using a V4L2 format by using the new PixelFormatInfo lookup function based on V4L2 format. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: PixelFormatInfo: Add functions stride and frameSizePaul Elder
Add member functions to PixelFormatInfo for calculating stride and frame size. This will simplify existing code that calculates these things. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: StreamConfiguration: Add frameSize fieldPaul Elder
In addition to the stride field, we want the pipeline handler to be able to declare the frame size for the configuration. Add a frameSize field to StreamConfiguration for this purpose. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-10libcamera: formats: PixelFormatInfo: Add v4l2 lookup functionPaul Elder
Add a lookup function for PixelFormatInfo that takes a V4L2PixelFormat. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: V4L2VideoDevice: Add tryFormatPaul Elder
Add tryFormat and its variations (meta, single-plane, multi-plane) to V4L2VideoDevice. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-10libcamera: formats: Add fields to info to ease calculating stridePaul Elder
Packed formats make it difficult to calculate stride as well as frame size with the fields that PixelFormatInfo currently has. bitsPerPixel is defined as the average number of bits per pixel, and only counts effective bits, so it is not useful for calculating stride and frame size. To fix this, we introduce a concept of a "pixel group". The size of this group is defined as the minimum number of pixels (including padding) necessary in a row when the image has only one column of effective pixels. The pixel group has one more attribute, that is the "bytes per group". This determines how many bytes one pixel group consumes. These are the fields pixelsPerGroup and bytesPerGroup that are defined in this patch. Defining these two values makes it really simple to calculate bytes-per-line, as ceil(width / pixelsPerGroup) * bytesPerGroup, where width is measured in number of pixels. The ceiling accounts for padding. The pixel group has another contraint, which is that the pixel group (bytesPerGroup and pixelsPerGroup) is the smallest repeatable unit. What this means is that, for example, in the IPU3 formats, if there is only one column of effective pixels, it looks like it could be fit in 5 bytes with 3 padding pixels (for a total of 4 pixels over 5 bytes). However, this unit is not repeatable, as at the 7th group in the same row, the pattern is broken. Therefore, the pixel group for IPU3 formats must be 25 pixels over 32 bytes. Clearly, pixelsPerGroup must be constant for all planes in the format. The bytesPerGroup then, must be a per-plane attribute. There is one more field, verticalSubSampling, that is per-plane. This is simply a divider, to divide the number of rows of pixels by the sub-sampling value, to obtain the number of rows of pixels for the subsampled plane. For example, for something simple like BGR888, it is self-explanatory: the pixel group size is 1, and the bytes necessary is 3, and there is only one plane with no (= 1) vertical subsampling. For YUYV, the CbCr pair is shared between two pixels, so even if you have only one pixel, you would still need a padded second Y, therefore the pixel group size is 2, and bytes necessary is 4 (as opposed to 1 and 2). YUYV also has no vertical subsampling. NV12 has a pixel group size of 2 pixels, due to the CbCr plane. The bytes per group then, for both planes, is 2. The first plane has no vertical subsampling, but the second plane is subsampled by a factor of 2. The IPU3 formats are also self-explanatory, as they are single-planar, and have a pixel group size of 25, consuming 32 bytes. Although a comment in the driver suggests that it should be 50 and 64, respectively, this is an attribute of the driver, and not the format, so this shall be set by the ipu3 pipeline handler. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-10libcamera: formats: Add NV24 and NV42, and reorder NV formatsPaul Elder
Add formats for NV24 and NV42. While at it, reorder the NV formats so that NV12 and NV21 come first, followed by NV16, NV61, NV24, and NV42. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-09libcamera: ipu3: cio2: Make use of utils::map_keys() helperNiklas Söderlund
Use a helper instead of local code to retrieve all keys from a map. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-09libcamera: utils: Add map_keys() functionLaurent Pinchart
Add a map_keys() function to the utils namespace to extract keys from a map. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [Niklas: change return type to std::vector instead of std::set] Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-08libcamera: Use Size::isNull()Laurent Pinchart
Use the new Size::isNull() function through the code base to replace manual checks. While the new code isn't equivalent, as isNull() checks that both width and height are zero, it catches the same conditions in practice. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-07android: camera_device: Remove single buffer restriction.Kieran Bingham
A capture request is no longer limited to a single output buffer. Remove the limitation, but (for now) keep the check to ensure that at least one buffer is always provided. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-07android: camera_device: Add buffers for each stream to RequestsKieran Bingham
Construct a FrameBuffer for every buffer given in the camera3Request and add it to the libcamera Request on the appropriate stream. The correct stream is obtained from the private data of the camera3_stream associated with the camera3_buffer. Comments regarding supporting only one buffer are now removed, and FrameBuffers have their lifetime tracked in the Camera3RequestDescriptor to ensure they are released when the Request is completed. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-06android: camera_device: Maintain a vector of CameraStreamKieran Bingham
Introduce a vector storing a CameraStream to track and maintain state between an Android stream (camera3_stream_t) and a libcamera Stream. Only the index of the libcamera stream is stored, to facilitate identifying the correct index for both the StreamConfiguration and Stream vectors. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-06android: camera_device: Create the Request and Camera3RequestDescriptor togetherKieran Bingham
Move the construction of the Request higher in the code flow so that multiple buffers and streams can be added where required. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-06android: camera_device: Simplify FrameBuffer construction from a buffer_handle_tKieran Bingham
Move the code which constructs a FrameBuffer from the Android buffer handle to it's own function to simplify the code flow and readability. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-06android: camera_device: Support multiple stream configurationsKieran Bingham
Create an initial Camera Configuration using an empty role set, and populate the StreamConfigurations manually from each of the streams given by the Android camera3_stream_configuration_t stream_list. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-06android: camera_device: Provide a toPixelFormat helperKieran Bingham
Rather than converting pixelformats through the map, and then dereferencing the iterator later, create a helper to explicitly return a PixelFormat type. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-06libcamera: camera: Allow unspecified roles for generateConfigurationKieran Bingham
Providing an empty set of roles is permitted to generate an empty configuration from the pipeline handlers. Overload the generateConfiguration() function such that not specifying a roles parameter will use an empty set, and return an empty configuration. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-06libcamera: ipa: raspberrypi: Populate focus FoM from the ISP statisticsNaushir Patuck
Switch FocusStatus::num to unsigned int for convenience. Fill in libcamera::controls::FocusFoM with the average of the middle two regions (across a 4x3 grid) FoM statistics from the ISP. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-06ipa: raspberrypi: Populate libcamera metadata after controller processNaushir Patuck
For control algorithms like focus, this is needed to return out the the current frame focus statistics. For other algorithms, there is no functional change. Signed-off-By: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-06libcamera: controls: Add focus Figure of Merit (FoM) controlNaushir Patuck
Provide a control to allow the IPA to return a FoM to indicate how in-focus a scene is. Note, this is not to be used as a means to implement a focus algorithm by the application, rather an indication of how in-focus a scene is. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-03utils: raspberrypi: ctt: json_pretty_print: Add newline at end of outputLaurent Pinchart
Make sure the output ends with a newline. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com>
2020-07-03utils: raspberrypi: ctt: json_pretty_print: Avoid spaces at end of linesLaurent Pinchart
Avoid outputting spaces at end of lines by recording the need for a space and outputting it before the next character only if not a newline. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com>
2020-07-03utils: raspberrypi: ctt: json_pretty_print: Collapse newlinesLaurent Pinchart
Simplify the newline skipping logic by simply collapsing newlines. If a newline has been output, all subsequent newlines will be skipped until the next non-newline character is output. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com>
2020-07-03utils: raspberrypi: ctt: json_pretty_print: Fix indentation handlingLaurent Pinchart
Indentation is handled by outputting spaces right after outputting a newline character. That works in most cases, but would result in the input '{}' being printed as { } instead of { } Fix it by outputting the indentation before outputting the next character after a newline. The indentation value will be updated by then. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com>
2020-07-03utils: raspberrypi: ctt: json_pretty_print: Add character write methodLaurent Pinchart
Add a write method to the JSONPrettyPrinter class to output a character. This will be used to handle state updates when outputting individual characters. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com>
2020-07-03utils: raspberrypi: ctt: json_pretty_print: Skip all spacesLaurent Pinchart
Skip all white space characters, not just ' '. This makes a difference if the input JSON data is already formatted. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com>
2020-07-03utils: raspberrypi: ctt: json_pretty_print: Make test output to stdoutLaurent Pinchart
The standalone test mode output to a file name "pretty.json". To make the test mode more versatile, output to stdout instead. The user can then decide how to use the output. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com>
2020-07-03utils: raspberrypi: ctt: json_pretty_print: Make output file a class memberLaurent Pinchart
Instead of passing the output file to every method of the printer class, make it a class member. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com>
2020-07-03utils: raspberrypi: ctt: json_pretty_print: Turn printer into a classLaurent Pinchart
Instead of passing a state dictionary to every method, turn the printer into a class and store the state internally. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com>
2020-07-03utils: raspberrypi: ctt: json_pretty_print: Fix printer testLaurent Pinchart
The ctt_pretty_print_json.py file supports being run standalone to test the code. It however suffers from multiple issues: - The same input file name is hardcoded, and doesn't exist in the repository - The input file name is used instead of JSON data Fix both issues and make the input file selectable on the command line. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com>
2020-07-03ipa: raspberrypi: Enable focus measure without recompileDavid Plowman
Previously, output of the focus measure could not be enabled without recompiling (because of the RPI_LOGGING_ENABLE macro). This uses the libcamera logging mechanism instead, so can be enabled/disabled at runtime. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-03libcamera: ipu3: cio2: Do not proxy signalNiklas Söderlund
Do not proxy the signal in the CI2Device when there is no need for it, remove it. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-03libcamera: ipu3: Make it easier to read when a request may be completedNiklas Söderlund
It's confusing to read the code and understand that a request is only completed before being processed by the ImgU if it only contains a single RAW buffer. Add a boolean variable with a explanatory name to make this clearer, no functional change. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-03libcamera: raspberrypi: Document vc_sm_cma pointer sharing with IPANiklas Söderlund
Sharing a pointer with the IPA is fragile as it will not work with all IPC mechanisms. Document that it's a temporary workaround that should be reworked. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-01ipa/pipeline: rkisp1: Fix spellingAndrej Shadura
Fix a typo in the word "unknown". Suggested-by: IOhannes m zmölnig <umlaeute@debian.org> Signed-off-by: Andrej Shadura <andrewsh@debian.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>