summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-18utils: checkstyle.py: Initialise staged trailersKieran Bingham
There are no possible Trailers for staged changes as the commit message has not yet been written. Initialise the empty trailers when the commit object is initialised. Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-18utils: checkstyle.py: Treat Malformed trailers as a CommitIssueKieran Bingham
If a Malformed trailer is identified the checkstyle script triggers a RuntimeError and stops processing the rest of the commit. A malformed trailer can be regarded as an issue in the commit and reported as such using the same method as other faults identified by the tool. Convert the RuntimeError into a CommitIssue and continue processing other trailers. Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-16libcamera v0.1.0v0.1.0Kieran Bingham
ABI Compliance: abi-compliance-checker reports 99% binary compatibility and 81.4% source compatibilty between version 0.0.5 and 0.1. - Binary compatibility: 99% - Source compatibility: 81.4% - Total binary compatibility problems: 4, warnings: 2 - Total source compatibility problems: 165, warnings: 7 Now that we have funtional ABI validation, the soname has been updated from libcamera.so.0.0.5 to libcamera.so.0.1. Future releases will now maintain the same soname until an ABI breakage is detected to reduce the repackaging and rebuilding of other components that may use libcamera. The abi-compatibility report can now be generated with the new utility './utils/abi-compat.sh'. Key differences here are due to preventing the installation of internal and private headers in the packaging process, and most of this API compatibility should not be visible to applications with the exception of: - Camera::generateConfiguration ( StreamRoles const& roles ) The StreamRoles type definition has been removed. This is now handled as a Span<StreamRole> to prevent unnecessary allocations and copies. - CameraManager::addCamera ( std::shared_ptr<struct Camera> camera, std::vector<unsigned long>const& devnums ) - CameraManager::get ( dev_t devnum ) - CameraManager::removeCamera ( std::shared_ptr<struct Camera> camera ) These functions of the CameraManager were for use exclusively by the V4L2 adaptation layer, and not intended for use by applications. This has now been reworked to use the new SystemDevices and the redundant functions removed. The ABI/API breakages have been introduced by: 5ca0c9276f28 ("libcamera: CameraManager: Remove ::get(dev_t)") 26a4b83d1b94 ("libcamera: Remove `StreamRoles` alias") 63966ae587d7 ("libcamera: base: Do not install private headers") Core: - libcamera: v4l2_videodevice: Use O_CLOEXEC when exporting DMA buffers - libcamera: ipa_manager: Allow IPA loading in nested subdirs - meson: Fix usage of overwritten pipeline variable - subprojects: Drop leftovers of pybind11 - camera_sensor: ipa: core: Add CFA pattern to IPACameraSensorInfo - libcamera: controls: Define a default lens position behaviour - libcamera: internal: request: convert to pragma once - libcamera: camera_manager: Move private implementation to internal - libcamera: camera_manager: Move {add,remove}Camera to internal - libcamera: properties: Provide a Devices camera property - libcamera: pipeline: Register device numbers with camera - libcamera: camera_sensor: Adjust properties::Rotation - libcamera: meson: Allow PH to change libcamera_deps - libcamera: base: Move thread_annotations to private - libcamera: base: Do not install private headers - utils: ABI Compatibility checker - meson: Use x.y soname versioning - libcamera: camera: Take span of StreamRole instead of vector - libcamera: Remove `StreamRoles` alias - utils: ipu3-capture.sh: Fix the script to work with recent media-ctl versions - Documentation: Add predefined macros from config.h to Doxyfile - utils: checkstyle: Add __repr__ method to CommitFile class - utils: checkstyle: Support running checkers selectively - utils: checkstyle: Don't include commit ID in commit title - utils: checkstyle: Add trailers checker - tests: gstreamer: Test cameras' enumeration from GstDeviceProvider - meson: Fix space around colon issues - libcamera: Add option to configure udev support - libcamera: CameraManager: Remove ::get(dev_t) - tests: gstreamer: Fix compiler error with gcc 8.4.0 ipa: - meson: ipa: Add mapping for pipeline handler to mojom interface file - libcamera: ipa: Remove character restriction on the IPA name - ipa: meson: Allow nested IPA directory structures - ipa: raspberrypi: Introduce IpaBase class - ipa: raspberrypi: agc: Move weights out of AGC - ipa: rkisp1: agc: drop hard-coded analogue gain range - libipa: camera_sensor_helper: Add IMX327 helper - pipeline: rpi: ipa_base: Parse config files after platformRegister() - libcamera: camera_sensor: Add Sony IMX327 sensor properties - ipa: rpi: imx296: Small refinements to the IMX296 mono sensor tuning - ipa: rpi: Handle controls for mono variant sensors - libcamera: controls: Drop reference to IPA in controls documentation - libipa: camera_sensor_helper: Restore alphabetical order - ipa: ipu3: agc: Drop hard-codec analogue gain max - ipa: rkisp1: agc: Restore minimum analogue gain limit - pipeline: ipa: rpi: Return lens controls from ipa->configure() - ipa: rpi: Set lens position to hyperfocal on startup - ipa: rpi: tunings: Add missing short and long exposure profiles - ipa: rpi: agc: Use std::string instead of char arrays - ipa: rpi: agc: Gracefully handle missing agc modes - ipa: rpi: agc: Do not switch to a default if a mode is unavailable - ipa: rpi: imx708: Fix mode switch drop frame count - ipa: rpi: imx296_mono: Disable all colour shading pipeline: - libcamera: pipeline: simple: Add support for ST's DCMIPP - pipeline: meson: Allow nested pipeline handler directory structures - pipeline: ipa: raspberrypi: Refactor and move the Raspberry Pi code - pipeline: raspberrypi: rpi_stream: Set invalid buffer to id == 0 - pipeline: ipa: raspberrypi: Restructure the IPA mojom interface - pipeline: raspberrypi: Make RPi::Stream::name() return const std::string & - pipeline: raspberrypi: Introduce PipelineHandlerBase class - pipeline: raspberrypi: Add stream flags to RPi::Stream - libcamera: rkisp1: Generate config using main path - libcamera: rkisp1: Crop on ISP before downscaling - libcamera: rkisp1: Assign sizes to roles - libcamera: rkisp1: Fix enumeration of RAW formats - pipeline: rpi: Do not return an error from pipeline config file handling - libcamera: pipeline: simple: Support TI CSI-RX - pipeline: rpi: Account for Bayer packing when validating format apps: - apps: qcam: Remove redundant check - v4l2: Move the v4l2 compat layer to libexec/libcamera - android: mm: generic: use GRALLOC_HARDWARE_MODULE_ID - android: mm: Stub libhardware for build tests - py: Fix CameraManager.version property - py: Move ColorSpace and Transform classes to separate files - py: Use exceptions instead of returning error codes - py: unittests.py: Add weakref helpers and use del - py: Move to mainline pybind11 version - py: Fix code formatting - py: unittests.py: Fix type checker warnings - gstreamer: Add enable_auto_focus option to the GStreamer plugin - gstreamer: Drop libcamera_private dependency - apps: Add ipa-verify application - v4l2: v4l2_camera_proxy: Prevent ioctl sign-extensions - v4l2: Use SystemDevices properties to identify cameras Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-11tests: gstreamer: Fix compiler error with gcc 8.4.0Laurent Pinchart
The provider g_autoptr variable introduced by commit adb1bbb748a1 ("tests: gstreamer: Test cameras' enumeration from GstDeviceProvider") is left uninitialized when declared. The cleanup function could thus get called on an unitialized variable if the scope was exited before the variable gets initialized. This can't occur here, but gcc 8.4.0 still complains about it: /usr/include/glib-2.0/glib/gmacros.h: In member function ‘virtual int GstreamerDeviceProviderTest::run()’: /usr/include/glib-2.0/glib/gmacros.h:1049:27: error: ‘provider’ may be used uninitialized in this function [-Werror=maybe-uninitialized] { if (_ptr) (cleanup) ((ParentName *) _ptr); } \ ^ ../test/gstreamer/gstreamer_device_provider_test.cpp:37:32: note: ‘provider’ was declared here g_autoptr(GstDeviceProvider) provider; Silence the error by initializing the variable to NULL at declaration time. This is a good practice in any case, as later refactoring could otherwise introduce a scope exit before initialization. Fixes: adb1bbb748a1 ("tests: gstreamer: Test cameras' enumeration from GstDeviceProvider") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-11libcamera: CameraManager: Remove ::get(dev_t)Kieran Bingham
The CameraManager::get(dev_t) implementation was provided only for the V4L2 Adaptation layer. This has now been replaced with the use of the public SystemDevices property. Remove the deprecated function entirely, along with the camerasByDevnum_ map which was only used to support this functionality. This is a clear (and intentional) breakage in both the API and ABI. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-11v4l2: Use SystemDevices properties to identify camerasKieran Bingham
The CameraManager->get(dev_t) helper was implemented only to support the V4L2 Adaptation layer, and has been deprecated now that a new camera property - SystemDevices has been introduced. Rework the implementation of getCameraIndex() to use the SystemDevices property and remove reliance on the now deprecated call. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-11v4l2: v4l2_camera_proxy: Prevent ioctl sign-extensionsKieran Bingham
Handling ioctl's within applications is often wrapped with a helper such as xioctl. Unfortunately, there are many instances of xioctl which incorrectly handle the correct size of the ioctl request. This leads to incorrect sign-extension of ioctl's which have bit-31 set, and can cause values to be passed into the libcamera's v4l2 adaptation layer which no longer represent the true IOCTL code. Match the implementation of the Linux kernel and ensure that only 32 bits of the ioctl request are used by assigning to an unsigned int. Link: https://github.com/Motion-Project/motion/discussions/1636 Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-10ipa: rpi: imx296_mono: Disable all colour shadingNaushir Patuck
Colour shading should be turned off for the mono variant of the IMX296 sensor. To do this, set all the colour gain coefficients to 1. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <daivd.plowman@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-10ipa: rpi: imx708: Fix mode switch drop frame countNaushir Patuck
The imx708 must drop a single frame on startup - but only when in HDR mode. Non-HDR modes do not need to drop frames. Fix the logic in hideFramesModeSwitch() which currently unconditionally advertises to drop one frame. Unfortunately there is no clear way to tell if the sensor is in the HDR mode. So for now, look the resolution and framerate to deduce this. Additionally ensure we override hideFramesStartup() and return the same number as hideFramesModeSwitch(). Bug: https://github.com/raspberrypi/libcamera-apps/issues/524 Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-07pipeline: rpi: Account for Bayer packing when validating formatNaushir Patuck
RPiCameraConfiguration::validate() did not account for user supplied Bayer packing when validating the RAW stream configuration. Fix this by seeing what packing (if any) has been specified selecting the output RAW stream format. Fixes: 6c71ee1f1530 ("pipeline: raspberrypi: Introduce PipelineHandlerBase class") Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-07-07libcamera: pipeline: simple: Support TI CSI-RXJai Luthra
New TI SoCs from J7 and AM62 family have a camera pipeline that receives data using Cadence's DPHY-RX and CSI-RX bridge. A pixel-grabbing "shim" IP routes this incoming stream of data to the DMA subsystem, to finally store the frame data in memory. The driver for this is not merged in mainline yet, but v7 was posted [1] on linux-media list a few months ago. With some minor fixes, the work-in-progress v8 series [2] works with the simple pipeline handler, so we enable support for this device. Link: https://lore.kernel.org/all/20230314115516.667-1-vaishnav.a@ti.com/ [1] Link: https://github.com/jailuthra/linux/commits/6ff226ca13f34 [2] Signed-off-by: Jai Luthra <j-luthra@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-07-07libcamera: Add option to configure udev supportLaurent Pinchart
libcamera uses udev to support hotplug (and unplug) detection. This is an optional feature, which gets selected automatically if udev is available. Users may however want to build libcamera without hotplug detection, even if udev is available on the system. Add a new feature option to control udev support. The default value is auto, which retains the existing behaviour. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-07meson: Fix space around colon issuesLaurent Pinchart
The meson style, which libcamera follows, recommends a space before colons in function parameters. Fix the style violations through the project. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2023-07-06tests: gstreamer: Test cameras' enumeration from GstDeviceProviderUmang Jain
Test the enumeration of the cameras through GstDeviceProvider against the libcamera camera manager. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
2023-07-05utils: checkstyle: Add trailers checkerLaurent Pinchart
The libcamera git history contains numerous examples of incorrect commit message trailers due to invalid trailer types (e.g. Change-Id), typos and other small issues. Those went unnoticed through reviews, which shows that an automated checker is required. Add a trailers checker to checkstyle.py to catch invalid or malformed trailers, with a set of supported trailers that match libcamera's commit message practices. New trailer keys can easily be added later as new needs arise. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-05utils: checkstyle: Don't include commit ID in commit titleLaurent Pinchart
The commit title and commit ID are two different pieces of information. Don't include the latter in the former, to simplify code that only needs the commit title. Constructing a string from the ID and title is easier than splitting the combined string back into its elements. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-05utils: checkstyle: Support running checkers selectivelyLaurent Pinchart
During development of the checkstyle.py script, it can be useful to run only a subset of the checker. Add the ability to do so with a '--checkers' command line argument. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-05utils: checkstyle: Add __repr__ method to CommitFile classLaurent Pinchart
Add a custom representation to the CommitFile class in order to facilitate debugging. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-05apps: Add ipa-verify applicationLaurent Pinchart
When packaging libcamera, distributions may break IPA module signatures if the packaging process strips binaries. This can be fixed by resigning the modules, but the process is error-prone. Add a command line ipa-verify utility that tests the signature on an IPA module to help packagers. The tool takes a single argument, the path to an IPA module shared object, and expects the signature file (.sign) to be in the same directory. In order to access the public key needed for signature verification, add a static function to the IPAManager class. As the class is internal to libcamera, this doesn't affect the public API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Javier Martinez Canillas <javierm@redhat.com>
2023-07-05Documentation: Add predefined macros from config.h to DoxyfileLaurent Pinchart
libcamera creates a config.h file with predefined macros, and instructs the compiler to include it implicitly with the -include argument. Doxygen has no support for implicit inclusion of headers, but has a PREDEFINED configuration option for its preprocessor that lists predefined macros. Populate it with the values from the config_h configuration data object that is used for generate the config.h file, to ensure that documentation matches the configuration options libcamera has been built with. Bump the minimum meson version to 0.57 to use cfg_data.keys(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-05utils: ipu3-capture.sh: Fix the script to work with recent media-ctl versionsHans de Goede
Recent media-ctl versions include the framerate in the fmt property output: - entity 37: ov5693 4-0036 (1 pad, 1 link) type V4L2 subdev subtype Sensor flags 0 device node name /dev/v4l-subdev6 pad0: Source [fmt:SBGGR10_1X10/2592x1944@1/30 crop.bounds:(16,6)/2592x1944 crop:(16,6)/2592x1944] -> "ipu3-csi2 1":0 [ENABLED] This resulted in $sensor_size getting set to: "2592x1944@1 30", which causes the script to fail. Fix this by: 1. Replacing the gsub() to remove the '/' between e.g. SBGGR10_1X10 and 2592x1944 with a sub() so that only that first '/' gets replaced (resulting in a $sensor_size of "2592x1944@1/30" instead). 2. Adding a new sub() to remove the @1/30 suffix. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-04libcamera: Remove `StreamRoles` aliasBarnabás Pőcze
Now that `Camera::generateConfiguration()` takes a `libcamera::Span` of `StreamRole`, remove the `StreamRoles` type, which was an alias to `std::vector<libcamera::StreamRole>`. The removal has two reasons: - it is no longer strictly necessary, - its presence may suggest that that is the preferred (or correct) way to build/pass a list of `StreamRole`. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> [Kieran: Fix small checkstyle report on roles initialiser] Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-04libcamera: camera: Take span of StreamRole instead of vectorBarnabás Pőcze
Change the parameter type of `generateConfiguration()` from `const std::vector&` to `libcamera::Span`. A span is almost always preferable to a const vector ref because it does not force dynamic allocation when none are needed, and it allows any contiguous container to be used. A new overload is added that accepts an initializer list so that cam->generateConfiguration({ ... }) keeps working. There is no API break since a span can be constructed from a vector and the initializer list overload takes care of the initializer lists, but this change causes an ABI break. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [Kieran: Apply checkstyle fixups] Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-04meson: Use x.y soname versioningKieran Bingham
Now that we identify ABI breakages, provide incremental releases which can support backwards compatible linkage across release points that have a compatible ABI. Introduction of this commit does not convey that libcamera now has a stable API, but that patch releases with a common minor number (0.minor.patch) may potentially be used by applications without recompilation and linkage against new releases. Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-04utils: ABI Compatibility checkerKieran Bingham
Provide support to compare ABI compatibility between any two git commits or by a commit and the most recent ancestral tag of that commit. Tested-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-04libcamera: base: Do not install private headersKieran Bingham
Split the public and private headers from the base library and stop installing private headers as part of the install process. Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-04libcamera: base: Move thread_annotations to privateKieran Bingham
The libcamera thread annotations are for internal use only and are not part of any public API. Mark the header accordingly by including the private.h header guard. Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-06-28gstreamer: Drop libcamera_private dependencyUmang Jain
Drop libcamera_private dependency entirely as to avoid libcamerasrc getting more dependent on it. In order to achieve that, one of the mutex locks in GstLibcameraSrcState needs to be replaced with GMutex. However doing so, this won't let us to use the clang's thread annotation macros in libcamera (which should be fine as libcamerasrc would move out of libcamera repo once matured). Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
2023-06-19libcamera: meson: Allow PH to change libcamera_depsNaushir Patuck
Pipeline handlers can have custom dependencies. Allow each pipeline handler subdir to add them to libcamera_deps[]. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-19pipeline: rpi: Do not return an error from pipeline config file handlingNaushir Patuck
If a user provided pipeline config file is not present, or if the version reported in the file is invalid, do not return with an error when creating the pipeline handler. Instead, log a warning message and return success with default pipeline config values used. This now matches the behaviour when the pipeline config file could not be parsed correctly, and we revert to default values. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
2023-06-19ipa: rpi: agc: Do not switch to a default if a mode is unavailableNaushir Patuck
In commit 0ee9339331c6, a default metering/exposure/constraint mode is used if a control sets a mode that is not listed in the camera tuning file. Setting a default mode may be undesirable in these cases, so instead keep the agc mode unchanged. This also matches the behaviour for other IPA controls where no changes are made in error conditions. Fixes: 0ee9339331c6 ("ipa: rpi: agc: Gracefully handle missing agc modes") Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
2023-06-19libcamera: camera_sensor: Adjust properties::RotationJacopo Mondi
As the CameraSensor::validateTransform() function compensate for the sensor's mounting rotation, the properties::Rotation value should be adjusted to make sure application that receive already "corrected" images do not get confused by Rotation still reporting a value. Howerver, as an image sensor can only compensate rotations by applying H/V flips, only correct Rotation when the mounting rotation is 180 degrees. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2023-06-18gstreamer: Add enable_auto_focus option to the GStreamer pluginCedric Nugteren
Cameras such as the PiCam 3 support auto-focus, but the GStreamer plugin for libcamera does not enable auto-focus. With this patch auto-focus can be enabled for cameras that support it. By default it is disabled, which means default behaviour remains unchanged. For cameras that do not support auto-focus, an error message shows up if auto-focus is enabled. This was tested on cameras that do not support auto-focus (e.g. PiCam2) and was tested on a camera that does support auto-focus (PiCam3). The test involved setting the focus to AfModeContinous and observing it. However, by not setting "auto-focus-mode" or using AfModeManual as the "auto-focus-mode" both resulting in auto-focus being disabled. Bug: https://bugs.libcamera.org/show_bug.cgi?id=188 Signed-off-by: Cedric Nugteren <cedric@plumerai.com> Reviewed-by: Maarten Lankhorst <dev@lankhorst.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Tested-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2023-06-17libcamera: pipeline: Register device numbers with cameraKieran Bingham
Register the identified device numbers with each camera as the SystemDevices property. This facilitates camera daemons or other systems to identify which devices are being managed by libcamera, and can prevent duplication of camera resources. As the SystemDevices property now provides this list of devices, use it directly from within the CameraManager when adding a Camera rather than passing it through the internal API. Tested-by: Ashok Sidipotu <ashok.sidipotu@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-06-17libcamera: properties: Provide a Devices camera propertyKieran Bingham
Provide a new Camera property that allows pipeline handlers to list any kernel device used to operate the camera. This allows other frameworks and daemons such as PipeWire to better understand the resources consumed by a Camera and consider ignoring those resources when enumerating camera devices on a system. Tested-by: Ashok Sidipotu <ashok.sidipotu@collabora.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-06-17libcamera: camera_manager: Move {add,remove}Camera to internalKieran Bingham
The CameraManager exposes addCamera and removeCamera as public API calls, while they should never be called from an application. These calls are only expected to be used by PipelineHandlers to update the CameraManager that a new Camera has been created and allow the Camera Manager to expose it to applications. Remove the public calls and update the private implementations such that they can be used directly by the PipelineHandler through the internal CameraManager::Private provided by the Extensible class. Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Tested-by: Ashok Sidipotu <ashok.sidipotu@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-06-17libcamera: camera_manager: Move private implementation to internalKieran Bingham
The CameraManager makes use of the Extensible pattern to provide an internal private implementation that is not exposed in the public API. Move the Private declaration to an internal header to make it available from other internal components in preperation for reducing the surface area of the public interface of the CameraManager. Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Tested-by: Ashok Sidipotu <ashok.sidipotu@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-06-17libcamera: internal: request: convert to pragma onceKieran Bingham
Remove the verbose #ifndef/#define/#endif pattern for maintaining header idempotency, and replace it with a simple #pragma once. This simplifies the headers, and prevents redundant changes when header files get moved. The internal/request.h was missed at the time of the original conversion. Update it. Fixes: df131ad08893 ("libcamera: internal: Convert to pragma once") Tested-by: Ashok Sidipotu <ashok.sidipotu@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-06-07ipa: rpi: agc: Gracefully handle missing agc modesNaushir Patuck
If a metering/exposure/constraint mode is not listed in the sensor tuning file, and a control for the missing mode is set on the agc, we terminate the application with a fatal log message. Instead of this fatal termination, log a warning message and switch to the appropriate default mode so that the application continues running. Bug: https://github.com/raspberrypi/libcamera/issues/59 Bug: https://github.com/ayufan/camera-streamer/issues/67 Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-06-07ipa: rpi: agc: Use std::string instead of char arraysNaushir Patuck
Replace the char array strings in struct AgcStatus with std::string objects. This simplifies the string handling in the source code. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-06-07ipa: rpi: tunings: Add missing short and long exposure profilesNaushir Patuck
Some sensor tuning files were missing the short and/or long exposure mode profiles. Add the missing items to the relevant files. As a drive-by, rename the "sport" exposure profile to "short" for the IMX290 tuning. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-06-06libcamera: rkisp1: Fix enumeration of RAW formatsJacopo Mondi
The current implementation enumerates a single RAW format (the sensor's resolution) and does that regardless of what role the CameraConfiguration has been generated for. Fix this by: - Enumerate RAW StreamFormats only when the requested role is StreamRole::Raw - Add all the sensor's provided resolutions that fit the video device output maximum size Before this patch, a single RAW size was enumerated in stream formats * Pixelformat: SRGGB10 (4208x3120)-(4208x3120)/(+1,+1) - 4208x3120 With this patch applied all sensor's supported resolutions are enumerated but only when the stream role RAW is explicitly requested * Pixelformat: SRGGB10 (1048x780)-(4208x3120)/(+0,+0) - 1048x780 - 2104x1560 - 4032x3024 - 4208x3120 Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2023-06-06libcamera: rkisp1: Assign sizes to rolesJacopo Mondi
Currently each RkISP1 path (main and self) generate a configuration by bounding the sensor's resolution to their respective maximum output aspect ratio and size. Size maxResolution = maxResolution_.boundedToAspectRatio(resolution) .boundedTo(resolution); In the case of self path, whose maximum size is 1920x1920, the generated configuration could get assigned unusual sizes, as the result of the above operation. As an example, with the imx258 sensor whose resolution is 4208x3118, the resulting size for the Viewfinder use case is an unusual 1920x1423. Fix this by assigning to each role a desired output size: - Use the sensor's resolution for StillCapture and Raw - Use 1080p for Viewfinder and VideoRecording Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-06libcamera: rkisp1: Crop on ISP before downscalingJacopo Mondi
Crop on the resizer sink pad before downscaling to the aspect ratio of the desired output size. Cropping the input frame to the output aspect ratio allows to maintain the correct picture proportions, as otherwise downscaling would change the image geometry. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2023-06-06libcamera: rkisp1: Generate config using main pathJacopo Mondi
The generateConfiguration() implementation in the Rockchip RkISP1 pipeline handler uses by default the self path (if available) for the Viewfinder and VideoRecording StreamRoles. The validate() implementation, at the contrary, prefers using the main path, when available, for all streams. As the self-path is limited in output resolution to 1920x1920, generating a configuration using the self path limits the maximum stream size to 1920x1920, while higher resolutions can be obtained by using the main path. Align the generateConfiguration() implementation to the validate() one by using the main path by default if available. Bug: https://bugs.libcamera.org/show_bug.cgi?id=180 Reported-by: libcamera@luigi311.com Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-06ipa: rpi: Set lens position to hyperfocal on startupNaushir Patuck
On the first ipa->configure() call, set the lens position (if a lens is present) to the default position. Typically this would be the hyperfocal position based on the tuning data. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-06pipeline: ipa: rpi: Return lens controls from ipa->configure()Naushir Patuck
In addition to sensor controls, return lens controls from IpaBase::configure() back to the pipeline handler. If there are lens controls present in the ControlList, action them in the pipeline handler as part of the configure routine. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-06libcamera: controls: Define a default lens position behaviourNaushir Patuck
Update the AfMode control description to explicitly define a startup/default behaviour. On startup, the camera will move the lens to the position given by the default value of the LensPosition control if operating in manual focus mode. Typically this would be the hyperfocal position of the lens. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-06ipa: rkisp1: agc: Restore minimum analogue gain limitJacopo Mondi
Commit a3178dd0391f ("ipa: rkisp1: agc: drop hard-coded analogue gain range") removed both minimum and maximum limits for the analogue gain value. However, as some sensors can potentially have a minimum gain lower than 1.0, restore the check for the minimum limit. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-06-06ipa: ipu3: agc: Drop hard-codec analogue gain maxJacopo Mondi
As the sensor's analogue gain range is known, drop the arbitrary maximum limit for the sensor analogue gain. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Tested-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>