diff options
Diffstat (limited to 'src/libcamera/control_ids_core.yaml')
-rw-r--r-- | src/libcamera/control_ids_core.yaml | 232 |
1 files changed, 0 insertions, 232 deletions
diff --git a/src/libcamera/control_ids_core.yaml b/src/libcamera/control_ids_core.yaml index ff74ce1d..76fb9347 100644 --- a/src/libcamera/control_ids_core.yaml +++ b/src/libcamera/control_ids_core.yaml @@ -865,236 +865,4 @@ controls: description: | This is a long exposure image. - # ---------------------------------------------------------------------------- - # Draft controls section - - - AePrecaptureTrigger: - type: int32_t - draft: true - description: | - Control for AE metering trigger. Currently identical to - ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER. - - Whether the camera device will trigger a precapture metering sequence - when it processes this request. - enum: - - name: AePrecaptureTriggerIdle - value: 0 - description: The trigger is idle. - - name: AePrecaptureTriggerStart - value: 1 - description: The pre-capture AE metering is started by the camera. - - name: AePrecaptureTriggerCancel - value: 2 - description: | - The camera will cancel any active or completed metering sequence. - The AE algorithm is reset to its initial state. - - - NoiseReductionMode: - type: int32_t - draft: true - description: | - Control to select the noise reduction algorithm mode. Currently - identical to ANDROID_NOISE_REDUCTION_MODE. - - Mode of operation for the noise reduction algorithm. - enum: - - name: NoiseReductionModeOff - value: 0 - description: No noise reduction is applied - - name: NoiseReductionModeFast - value: 1 - description: | - Noise reduction is applied without reducing the frame rate. - - name: NoiseReductionModeHighQuality - value: 2 - description: | - High quality noise reduction at the expense of frame rate. - - name: NoiseReductionModeMinimal - value: 3 - description: | - Minimal noise reduction is applied without reducing the frame rate. - - name: NoiseReductionModeZSL - value: 4 - description: | - Noise reduction is applied at different levels to different streams. - - - ColorCorrectionAberrationMode: - type: int32_t - draft: true - description: | - Control to select the color correction aberration mode. Currently - identical to ANDROID_COLOR_CORRECTION_ABERRATION_MODE. - - Mode of operation for the chromatic aberration correction algorithm. - enum: - - name: ColorCorrectionAberrationOff - value: 0 - description: No aberration correction is applied. - - name: ColorCorrectionAberrationFast - value: 1 - description: Aberration correction will not slow down the frame rate. - - name: ColorCorrectionAberrationHighQuality - value: 2 - description: | - High quality aberration correction which might reduce the frame - rate. - - - AeState: - type: int32_t - draft: true - description: | - Control to report the current AE algorithm state. Currently identical to - ANDROID_CONTROL_AE_STATE. - - Current state of the AE algorithm. - enum: - - name: AeStateInactive - value: 0 - description: The AE algorithm is inactive. - - name: AeStateSearching - value: 1 - description: The AE algorithm has not converged yet. - - name: AeStateConverged - value: 2 - description: The AE algorithm has converged. - - name: AeStateLocked - value: 3 - description: The AE algorithm is locked. - - name: AeStateFlashRequired - value: 4 - description: The AE algorithm would need a flash for good results - - name: AeStatePrecapture - value: 5 - description: | - The AE algorithm has started a pre-capture metering session. - \sa AePrecaptureTrigger - - - AwbState: - type: int32_t - draft: true - description: | - Control to report the current AWB algorithm state. Currently identical - to ANDROID_CONTROL_AWB_STATE. - - Current state of the AWB algorithm. - enum: - - name: AwbStateInactive - value: 0 - description: The AWB algorithm is inactive. - - name: AwbStateSearching - value: 1 - description: The AWB algorithm has not converged yet. - - name: AwbConverged - value: 2 - description: The AWB algorithm has converged. - - name: AwbLocked - value: 3 - description: The AWB algorithm is locked. - - - SensorRollingShutterSkew: - type: int64_t - draft: true - description: | - Control to report the time between the start of exposure of the first - row and the start of exposure of the last row. Currently identical to - ANDROID_SENSOR_ROLLING_SHUTTER_SKEW - - - LensShadingMapMode: - type: int32_t - draft: true - description: | - Control to report if the lens shading map is available. Currently - identical to ANDROID_STATISTICS_LENS_SHADING_MAP_MODE. - enum: - - name: LensShadingMapModeOff - value: 0 - description: No lens shading map mode is available. - - name: LensShadingMapModeOn - value: 1 - description: The lens shading map mode is available. - - - PipelineDepth: - type: int32_t - draft: true - description: | - Specifies the number of pipeline stages the frame went through from when - it was exposed to when the final completed result was available to the - framework. Always less than or equal to PipelineMaxDepth. Currently - identical to ANDROID_REQUEST_PIPELINE_DEPTH. - - The typical value for this control is 3 as a frame is first exposed, - captured and then processed in a single pass through the ISP. Any - additional processing step performed after the ISP pass (in example face - detection, additional format conversions etc) count as an additional - pipeline stage. - - - MaxLatency: - type: int32_t - draft: true - description: | - The maximum number of frames that can occur after a request (different - than the previous) has been submitted, and before the result's state - becomes synchronized. A value of -1 indicates unknown latency, and 0 - indicates per-frame control. Currently identical to - ANDROID_SYNC_MAX_LATENCY. - - - TestPatternMode: - type: int32_t - draft: true - description: | - Control to select the test pattern mode. Currently identical to - ANDROID_SENSOR_TEST_PATTERN_MODE. - enum: - - name: TestPatternModeOff - value: 0 - description: | - No test pattern mode is used. The camera device returns frames from - the image sensor. - - name: TestPatternModeSolidColor - value: 1 - description: | - Each pixel in [R, G_even, G_odd, B] is replaced by its respective - color channel provided in test pattern data. - \todo Add control for test pattern data. - - name: TestPatternModeColorBars - value: 2 - description: | - All pixel data is replaced with an 8-bar color pattern. The vertical - bars (left-to-right) are as follows; white, yellow, cyan, green, - magenta, red, blue and black. Each bar should take up 1/8 of the - sensor pixel array width. When this is not possible, the bar size - should be rounded down to the nearest integer and the pattern can - repeat on the right side. Each bar's height must always take up the - full sensor pixel array height. - - name: TestPatternModeColorBarsFadeToGray - value: 3 - description: | - The test pattern is similar to TestPatternModeColorBars, - except that each bar should start at its specified color at the top - and fade to gray at the bottom. Furthermore each bar is further - subdevided into a left and right half. The left half should have a - smooth gradient, and the right half should have a quantized - gradient. In particular, the right half's should consist of blocks - of the same color for 1/16th active sensor pixel array width. The - least significant bits in the quantized gradient should be copied - from the most significant bits of the smooth gradient. The height of - each bar should always be a multiple of 128. When this is not the - case, the pattern should repeat at the bottom of the image. - - name: TestPatternModePn9 - value: 4 - description: | - All pixel data is replaced by a pseudo-random sequence generated - from a PN9 512-bit sequence (typically implemented in hardware with - a linear feedback shift register). The generator should be reset at - the beginning of each frame, and thus each subsequent raw frame with - this test pattern should be exactly the same as the last. - - name: TestPatternModeCustom1 - value: 256 - description: | - The first custom test pattern. All custom patterns that are - available only on this camera device are at least this numeric - value. All of the custom test patterns will be static (that is the - raw image must not vary from frame to frame). - ... |