controls: Redefine AeEnable

In the redesign of the AE-related controls, the AeEnable control was
intended to be removed in favor of more specific sub-controls for
analogue gain and exposure time. However this will cause problems if
aperture sub-controls are introduced, and an application from a
pre-aperture era uses a camera that supports aperture.

If there is no AeEnable control, then a pre-aperture era application
might set analogue gain and exposure time to manual, while aperture
silently stays auto since that's the default mode. Thus aperture would
be uncontrollable by the application.

With an AeEnable control, then a pre-aperture era application can set
AeEnable to manual, and under the hood all three of analogue gain and
exposure time and aperture will be set to manual. The application won't
be able to set the manual aperture, however.

Although the above scenario is expected to be rare, the scenario with an
AeEnable control seems less detrimental. With an AeEnable control at
least the aperture would be static at a reasonably usable value, whereas
without an AeEnable the aperture would be more-or-less uncontrolable and
could go to extreme values as the AEGC algorithm tries to compensate for
the manual analogue gain and exposure time values.

Thus we redefine the AeEnable control, available only as a control and
not in metadata. It will be preprocessed by the Camera class so that the
relevant sub-controls are set. No pipline handler nor IPA shall act on
the AeEnable control. The IPA still has to report the control as
available, however.

Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

1 files changed, 17 insertions, 6 deletions

diff --git a/Documentation/design/ae.rst b/Documentation/design/ae.rst
index 9d5bb507..df9b1fa7 100644
--- a/Documentation/design/ae.rst
+++ b/Documentation/design/ae.rst
@@ -185,6 +185,10 @@ A diagram of our solution:
     0: Auto
     1: Manual
 
+  AeEnable
+    - True -> ExposureTimeMode:Auto + AnalogueGainMode:Auto
+    - False -> ExposureTimeMode:Manual + AnalogueGainMode:Manual
+
 
 The diagram is divided in four sections horizontally:
 
@@ -225,10 +229,14 @@ This simulates an auto -> locked -> manual or auto -> manual state transition,
 and makes it impossible to do the nonsensical manual -> locked state
 transition.
 
-We specifically do not have a "master AE control" like the old AeEnable. This
-is because we have the individual mode controls, and if we had a master AE
-control it would be a "control that sets other controls", which could easily
-get out of control.
+AeEnable still exists to allow applications to set the mode of all the
+sub-controls at once. Besides being for convenience, this will also be useful
+when we eventually implement an aperture control. This is because applications
+that will be made before aperture will have been available would still be able
+to set aperture mode to auto or manual, as opposed to having the aperture stuck
+at auto while the application really wanted manual. Although the aperture would
+still be stuck at an uncontrollable value, at least it would be at a static
+usable value as opposed to varying via the AEGC algorithm.
 
 With this solution, the earlier example would become:
 
@@ -277,9 +285,12 @@ and gain:
 
 - AeState
 
+- AeEnable
+
 Auto-exposure and auto-gain can be enabled and disabled separately using the
-ExposureTimeMode and AnalogueGainMode controls respectively. There is no
-overarching AeEnable control.
+ExposureTimeMode and AnalogueGainMode controls respectively. The AeEnable
+control can also be used, as it sets both of the modes simultaneously. The
+AeEnable control is not returned in metadata.
 
 When the respective mode is set to auto, the respective value that is computed
 by the AEGC algorithm is applied to the image sensor. Any value that is