# SPDX-License-Identifier: LGPL-2.1-or-later
#
# Copyright (C) 2019, Google Inc.
#
%YAML 1.2
---
# Unless otherwise stated, all controls are bi-directional, i.e. they can be
# set through Request::controls() and returned out through Request::metadata().
controls:
  - AeEnable:
      type: bool
      description: |
        Enable or disable the AE.

        \sa ExposureTime AnalogueGain

  - AeLocked:
      type: bool
      description: |
        Report the lock status of a running AE algorithm.

        If the AE algorithm is locked the value shall be set to true, if it's
        converging it shall be set to false. If the AE algorithm is not
        running the control shall not be present in the metadata control list.

        \sa AeEnable

  # AeMeteringMode needs further attention:
  # - Auto-generate max enum value.
  # - Better handling of custom types.
  - AeMeteringMode:
      type: int32_t
      description: |
        Specify a metering mode for the AE algorithm to use. The metering
        modes determine which parts of the image are used to determine the
        scene brightness. Metering modes may be platform specific and not
        all metering modes may be supported.
      enum:
        - name: MeteringCentreWeighted
          value: 0
          description: Centre-weighted metering mode.
        - name: MeteringSpot
          value: 1
          description: Spot metering mode.
        - name: MeteringMatrix
          value: 2
          description: Matrix metering mode.
        - name: MeteringCustom
          value: 3
          description: Custom metering mode.

  # AeConstraintMode needs further attention:
  # - Auto-generate max enum value.
  # - Better handling of custom types.
  - AeConstraintMode:
      type: int32_t
      description: |
        Specify a constraint mode for the AE algorithm to use. These determine
        how the measured scene brightness is adjusted to reach the desired
        target exposure. Constraint modes may be platform specific, and not
        all constraint modes may be supported.
      enum:
        - name: ConstraintNormal
          value: 0
          description: Default constraint mode.
            This mode aims to balance the exposure of different parts of the
            image so as to reach a reasonable average level. However, highlights
            in the image may appear over-exposed and lowlights may appear
            under-exposed.
        - name: ConstraintHighlight
          value: 1
          description: Highlight constraint mode.
            This mode adjusts the exposure levels in order to try and avoid
            over-exposing the brightest parts (highlights) of an image.
            Other non-highlight parts of the image may appear under-exposed.
        - name: ConstraintShadows
          value: 2
          description: Shadows constraint mode.
            This mode adjusts the exposure levels in order to try and avoid
            under-exposing the dark parts (shadows) of an image. Other normally
            exposed parts of the image may appear over-exposed.
        - name: ConstraintCustom
          value: 3
          description: Custom constraint mode.

  # AeExposureMode needs further attention:
  # - Auto-generate max enum value.
  # - Better handling of custom types.
  - AeExposureMode:
      type: int32_t
      description: |
        Specify an exposure mode for the AE algorithm to use. These specify
        how the desired total exposure is divided between the shutter time
        and the sensor's analogue gain. The exposure modes are platform
        specific, and not all exposure modes may be supported.
      enum:
        - name: ExposureNormal
          value: 0
          description: Default exposure mode.
        - name: ExposureShort
          value: 1
          description: Exposure mode allowing only short exposure times.
        - name: ExposureLong
          value: 2
          description: Exposure mode allowing long exposure times.
        - name: ExposureCustom
          value: 3
          description: Custom exposure mode.

  - ExposureValue:
      type: float
      description: |
        Specify an Exposure Value (EV) parameter. The EV parameter will only be
        applied if the AE algorithm is currently enabled.

        By convention EV adjusts the exposure as log2. For example
        EV = [-2, -1, 0.5, 0, 0.5, 1, 2] results in an exposure adjustment
        of [1/4x, 1/2x, 1/sqrt(2)x, 1x, sqrt(2)x, 2x, 4x].

        \sa AeEnable

  - ExposureTime:
      type: int32_t
      description: |
        Exposure time (shutter speed) for the frame applied in the sensor
        device. This value is specified in micro-seconds.

        Setting this value means that it is now fixed and the AE algorithm may
        not change it. Setting it back to zero returns it to the control of the
        AE algorithm.

        \sa AnalogueGain AeEnable

        \todo Document the interactions between AeEnable and setting a fixed
        value for this control. Consider interactions with other AE features,
        such as aperture and aperture/shutter priority mode, and decide if
        control of which features should be automatically adjusted shouldn't
        better be handled through a separate AE mode control.

  - AnalogueGain:
      type: float
      description: |
        Analogue gain value applied in the sensor device.
        The value of the control specifies the gain multiplier applied to all
        colour channels. This value cannot be lower than 1.0.

        Setting this value means that it is now fixed and the AE algorithm may
        not change it. Setting it back to zero returns it to the control of the
        AE algorithm.

        \sa ExposureTime AeEnable

        \todo Document the interactions between AeEnable and setting a fixed
        value for this control. Consider interactions with other AE features,
        such as aperture and aperture/shutter priority mode, and decide if
        control of which features should be automatically adjusted shouldn't
        better be handled through a separate AE mode control.

  - Brightness:
      type: float
      description: |
        Specify a fixed brightness parameter. Positive values (up to 1.0)
        produce brighter images; negative values (up to -1.0) produce darker
        images and 0.0 leaves pixels unchanged.

  - Contrast:
      type: float
      description:  |
        Specify a fixed contrast parameter. Normal contrast is given by the
        value 1.0; larger values produce images with more contrast.

  - Lux:
      type: float
      description: |
        Report an estimate of the current illuminance level in lux. The Lux
        control can only be returned in metadata.

  - AwbEnable:
      type: bool
      description: |
        Enable or disable the AWB.

        \sa ColourGains

  # AwbMode needs further attention:
  # - Auto-generate max enum value.
  # - Better handling of custom types.
  - AwbMode:
      type: int32_t
      description: |
        Specify the range of illuminants to use for the AWB algorithm. The modes
        supported are platform specific, and not all modes may be supported.
      enum:
        - name: AwbAuto
          value: 0
          description: Search over the whole colour temperature range.
        - name: AwbIncandescent
          value: 1
          description: Incandescent AWB lamp mode.
        - name: AwbTungsten
          value: 2
          description: Tungsten AWB lamp mode.
        - name: AwbFluorescent
          value: 3
          description: Fluorescent AWB lamp mode.
        - name: AwbIndoor
          value: 4
          description: Indoor AWB lighting mode.
        - name: AwbDaylight
          value: 5
          description: Daylight AWB lighting mode.
        - name: AwbCloudy
          value: 6
          description: Cloudy AWB lighting mode.
        - name: AwbCustom
          value: 7
          description: Custom AWB mode.

  - AwbLocked:
      type: bool
      description: |
        Report the lock status of a running AWB algorithm.

        If the AWB algorithm is locked the value shall be set to true, if it's
        converging it shall be set to false. If the AWB algorithm is not
        running the control shall not be present in the metadata control list.

        \sa AwbEnable

  - ColourGains:
      type: float
      description: |
        Pair of gain values for the Red and Blue colour channels, in that
        order. ColourGains can only be applied in a Request when the AWB is
        disabled.

        \sa AwbEnable
      size: [2]

  - ColourTemperature:
      type: int32_t
      description: Report the current estimate of the colour temperature, in
        kelvin, for this frame. The ColourTemperature control can only be
        returned in metadata.

  - Saturation:
      type: float
      description:  |
        Specify a fixed saturation parameter. Normal saturation is given by
        the value 1.0; larger values produce more saturated colours; 0.0
        produces a greyscale image.

  - SensorBlackLevels:
      type: int32_t
      description: |
        Reports the sensor black levels used for processing a frame, in the
        order R, Gr, Gb, B. These values are returned as numbers out of a 16-bit
        pixel range (as if pixels ranged from 0 to 65535). The SensorBlackLevels
        control can only be returned in metadata.
      size: [4]

  - Sharpness:
      type: float
      description:  |
        A value of 0.0 means no sharpening. The minimum value means
        minimal sharpening, and shall be 0.0 unless the camera can't
        disable sharpening completely. The default value shall give a
        "reasonable" level of sharpening, suitable for most use cases.
        The maximum value may apply extremely high levels of sharpening,
        higher than anyone could reasonably want. Negative values are
        not allowed. Note also that sharpening is not applied to raw
        streams.

  - FocusFoM:
      type: int32_t
      description: |
        Reports a Figure of Merit (FoM) to indicate how in-focus the frame is.
        A larger FocusFoM value indicates a more in-focus frame. This control
        depends on the IPA to gather ISP statistics from the defined focus
        region, and combine them in a suitable way to generate a FocusFoM value.
        In this respect, it is not necessarily aimed at providing a way to
        implement a focus algorithm by the application, rather an indication of
        how in-focus a frame is.

  - ColourCorrectionMatrix:
      type: float
      description: |
        The 3x3 matrix that converts camera RGB to sRGB within the
        imaging pipeline. This should describe the matrix that is used
        after pixels have been white-balanced, but before any gamma
        transformation. The 3x3 matrix is stored in conventional reading
        order in an array of 9 floating point values.

      size: [3x3]

  - ScalerCrop:
      type: Rectangle
      description: |
        Sets the image portion that will be scaled to form the whole of
        the final output image. The (x,y) location of this rectangle is
        relative to the PixelArrayActiveAreas that is being used. The units
        remain native sensor pixels, even if the sensor is being used in
        a binning or skipping mode.

        This control is only present when the pipeline supports scaling. Its
        maximum valid value is given by the properties::ScalerCropMaximum
        property, and the two can be used to implement digital zoom.

  - DigitalGain:
      type: float
      description: |
        Digital gain value applied during the processing steps applied
        to the image as captured from the sensor.

        The global digital gain factor is applied to all the colour channels
        of the RAW image. Different pipeline models are free to
        specify how the global gain factor applies to each separate
        channel.

        If an imaging pipeline applies digital gain in distinct
        processing steps, this value indicates their total sum.
        Pipelines are free to decide how to adjust each processing
        step to respect the received gain factor and shall report
        their total value in the request metadata.

  - FrameDuration:
      type: int64_t
      description: |