/* SPDX-License-Identifier: LGPL-2.1-or-later */
/*
 * Copyright (C) 2019, Google Inc.
 *
 * v4l2_device.cpp - Common base for V4L2 video devices and subdevices
 */

#include "v4l2_device.h"

#include <fcntl.h>
#include <iomanip>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/syscall.h>
#include <unistd.h>

#include "log.h"
#include "utils.h"
#include "v4l2_controls.h"

/**
 * \file v4l2_device.h
 * \brief Common base for V4L2 devices and subdevices
 */

namespace libcamera {

LOG_DEFINE_CATEGORY(V4L2)

/**
 * \class V4L2Device
 * \brief Base class for V4L2VideoDevice and V4L2Subdevice
 *
 * The V4L2Device class groups together the methods and fields common to
 * both the V4L2VideoDevice and V4L2Subdevice classes, and provides a base
 * class with methods to open and close the device node associated with the
 * device and to perform IOCTL system calls on it.
 *
 * The V4L2Device class cannot be instantiated directly, as its constructor
 * is protected. Users should instead create instances of one the derived
 * classes to model either a V4L2 video device or a V4L2 subdevice.
 */

/**
 * \brief Construct a V4L2Device
 * \param[in] deviceNode The device node filesystem path
 *
 * Initialize the file descriptor to -1 and store the \a deviceNode to be used
 * at open() time, and the \a logTag to prefix log messages with.
 */
V4L2Device::V4L2Device(const std::string &deviceNode)
	: deviceNode_(deviceNode), fd_(-1)
{
}

/**
 * \brief Destroy a V4L2Device
 */
V4L2Device::~V4L2Device()
{
}

/**
 * \brief Open a V4L2 device node
 * \param[in] flags Access mode flags
 *
 * Open the device node path with the provided access mode \a flags and
 * initialize the file descriptor, which was initially set to -1.
 *
 * \return 0 on success or a negative error code otherwise
 */
int V4L2Device::open(unsigned int flags)
{
	if (isOpen()) {
		LOG(V4L2, Error) << "Device already open";
		return -EBUSY;
	}

	int ret = syscall(SYS_openat, AT_FDCWD, deviceNode_.c_str(), flags);
	if (ret < 0) {
		ret = -errno;
		LOG(V4L2, Error) << "Failed to open V4L2 device: "
				 << strerror(-ret);
		return ret;
	}

	fd_ = ret;

	listControls();

	return 0;
}

/**
 * \brief Set the file descriptor of a V4L2 device
 * \param[in] fd The file descriptor handle
 *
 * This method allows a device to provide an already opened file descriptor
 * referring to the V4L2 device node, instead of opening it with open(). This
 * can be used for V4L2 M2M devices where a single video device node is used for
 * both the output and capture devices, or when receiving an open file
 * descriptor in a context that doesn't have permission to open the device node
 * itself.
 *
 * This method and the open() method are mutually exclusive, only one of the two
 * shall be used for a V4L2Device instance.
 *
 * \return 0 on success or a negative error code otherwise
 */
int V4L2Device::setFd(int fd)
{
	if (isOpen())
		return -EBUSY;

	fd_ = fd;

	return 0;
}

/**
 * \brief Close the device node
 *
 * Reset the file descriptor to -1
 */
void V4L2Device::close()
{
	if (!isOpen())
		return;

	if (::close(fd_) < 0)
		LOG(V4L2, Error) << "Failed to close V4L2 device: "
				 << strerror(errno);
	fd_ = -1;
}

/**
 * \fn V4L2Device::isOpen()
 * \brief Check if the V4L2 device node is open
 * \return True if the V4L2 device node is open, false otherwise
 */

/**
 * \fn V4L2Device::controls()
 * \brief Retrieve the supported V4L2 controls and their information
 * \return A map of the V4L2 controls supported by the device
 */

/**
 * \brief Read controls from the device
 * \param[in] ids The list of controls to read, specified by their ID
 *
 * This method reads the value of all controls contained in \a ids, and returns
 * their values as a ControlList.
 *
 * If any control in \a ids is not supported by the device, is disabled (i.e.
 * has the V4L2_CTRL_FLAG_DISABLED flag set), or if any other error occurs
 * during validation of the requested controls, no control is read and this
 * method returns an empty control list.
 *
 * \return The control values in a ControlList on success, or an empty list on
 * error
 */
ControlList V4L2Device::getControls(const std::vector<uint32_t> &ids)
{
	unsigned int count = ids.size();
	if (count == 0)
		return {};

	ControlList ctrls{ controls_ };

	/*
	 * Start by filling the ControlList. This can't be combined with filling
	 * v4l2Ctrls, as updateControls() relies on both containers having the
	 * same order, and the control list is based on a map, which is not
	 * sorted by insertion order.
	 */
	for (uint32_t id : ids) {
		const auto iter = controls_.find(id);
		if (iter == controls_.end()) {
			LOG(V4L2, Error)
				<< "Control " << utils::hex(id) << " not found";
			return {};
		}

		ctrls.set(id, {});
	}

	struct v4l2_ext_control v4l2Ctrls[count];
	memset(v4l2Ctrls, 0, sizeof(v4l2Ctrls));

	unsigned int i = 0;
	for (auto &ctrl : ctrls) {
		unsigned int id = ctrl.first;
		const struct v4l2_query_ext_ctrl &info = controlInfo_[id];

		if (info.flags & V4L2_CTRL_FLAG_HAS_PAYLOAD) {
			ControlType type;

			switch (info.type) {
			case V4L2_CTRL_TYPE_U8:
				type = ControlTypeByte;
				break;

			default:
				LOG(V4L2, Error)
					<< "Unsupported payload control type "
					<< info.type;
				return {};
			}

			ControlValue &value = ctrl.second;
			value.reserve(type, true, info.elems);
			Span<uint8_t> data = value.data();

			v4l2Ctrls[i].p_u8 = data.data();
			v4l2Ctrls[i].size = data.size();
		}

		v4l2Ctrls[i].id = id;
		i++;
	}

	struct v4l2_ext_controls v4l2ExtCtrls = {};
	v4l2ExtCtrls.which = V4L2_CTRL_WHICH_CUR_VAL;
	v4l2ExtCtrls.controls = v4l2Ctrls;
	v4l2ExtCtrls.count = count;

	int ret = ioctl(VIDIOC_G_EXT_CTRLS, &v4l2ExtCtrls);
	if (ret) {
		unsigned int errorIdx = v4l2ExtCtrls.error_idx;

		/* Generic validation error. */
		if (errorIdx == 0 || errorIdx >= count) {
			LOG(V4L2, Error) << "Unable to read controls: "
					 << strerror(-ret);
			return {};
		}

		/* A specific control failed. */
		LOG(V4L2, Error) << "Unable to read control " << errorIdx
				 << ": " << strerror(-ret);
		count = errorIdx - 1;
		ret = errorIdx;
	}

	updateControls(&ctrls, v4l2Ctrls, count);

	return ctrls;
}

/**
 * \brief Write controls to the device
 * \param[in] ctrls The list of controls to write
 *
 * This method writes the value of all controls contained in \a ctrls, and
 * stores the values actually applied to the device in the corresponding
 * \a ctrls entry.
 *
 * If any control in \a ctrls is not supported by the device, is disabled (i.e.
 * has the V4L2_CTRL_FLAG_DISABLED flag set), is read-only, if any other error
 * occurs during validation of the requested controls, no control is written and
 * this method returns -EINVAL.
 *
 * If an error occurs while writing the controls, the index of the first
 * control that couldn't be written is returned. All controls below that index
 * are written and their values are updated in \a ctrls, while all other
 * controls are not written and their values are not changed.
 *
 * \return 0 on success or an error code otherwise
 * \retval -EINVAL One of the control is not supported or not accessible
 * \retval i The index of the control that failed
 */
int V4L2Device::setControls(ControlList *ctrls)
{
	unsigned int count = ctrls->size();
	if (count == 0)
		return 0;

	struct v4l2_ext_control v4l2Ctrls[count];
	memset(v4l2Ctrls, 0, sizeof(v4l2Ctrls));

	unsigned int i = 0;
	for (auto &ctrl : *ctrls) {
		unsigned int id = ctrl.first;
		const auto iter = controls_.find(id);
		if (iter == controls_.end()) {
			LOG(V4L2, Error)
				<< "Control " << utils::hex(id) << " not found";
			return -EINVAL;
		}

		v4l2Ctrls[i].id = id;

		/* Set the v4l2_ext_control value for the write operation. */
		ControlValue &value = ctrl.second;
		switch (iter->first->type()) {
		case ControlTypeInteger64:
			v4l2Ctrls[i].value64 = value.get<int64_t>();
			break;

		case ControlTypeByte: {
			if (!value.isArray()) {
				LOG(V4L2, Error)
					<< "Control " << utils::hex(id)
					<< " requires an array value";
				return -EINVAL;
			}

			Span<uint8_t> data = value.data();
			v4l2Ctrls[i].p_u8 = data.data();
			v4l2Ctrls[i].size = data.size();

			break;
		}

		default:
			/* \todo To be changed to support strings. */
			v4l2Ctrls[i].value = value.get<int32_t>();
			break;
		}

		i++;
	}

	struct v4l2_ext_controls v4l2ExtCtrls = {};
	v4l2ExtCtrls.which = V4L2_CTRL_WHICH_CUR_VAL;
	v4l2ExtCtrls.controls = v4l2Ctrls;
	v4l2ExtCtrls.count = count;

	int ret = ioctl(VIDIOC_S_EXT_CTRLS, &v4l2ExtCtrls);
	if (ret) {
		unsigned int errorIdx = v4l2ExtCtrls.error_idx;

		/* Generic validation error. */
		if (errorIdx == 0 || errorIdx >= count) {
			LOG(V4L2, Error) << "Unable to set controls: "
					 << strerror(-ret);
			return -EINVAL;
		}

		/* A specific control failed. */
		LOG(V4L2, Error) << "Unable to set control " << errorIdx
				 << ": " << strerror(-ret);
		count = errorIdx - 1;
		ret = errorIdx;
	}

	updateControls(ctrls, v4l2Ctrls, count);

	return ret;
}

/**
 * \brief Perform an IOCTL system call on the device node
 * \param[in] request The IOCTL request code
 * \param[in] argp A pointer to the IOCTL argument
 * \return 0 on success or a negative error code otherwise
 */
int V4L2Device::ioctl(unsigned long request, void *argp)
{
	/*
	 * Printing out an error message is usually better performed
	 * in the caller, which can provide more context.
	 */
	if (::ioctl(fd_, request, argp) < 0)
		return -errno;

	return 0;
}

/**
 * \fn V4L2Device::deviceNode()
 * \brief Retrieve the device node path
 * \return The device node path
 */

/**
 * \fn V4L2Device::fd()
 * \brief Retrieve the V4L2 device file descriptor
 * \return The V4L2 device file descriptor, -1 if the device node is not open
 */

/*
 * \brief List and store information about all controls supported by the
 * V4L2 device
 */
void V4L2Device::listControls()
{
	ControlInfoMap::Map ctrls;
	struct v4l2_query_ext_ctrl ctrl = {};

	/* \todo Add support for menu controls. */
	while (1) {
		ctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL |
			   V4L2_CTRL_FLAG_NEXT_COMPOUND;
		if (ioctl(VIDIOC_QUERY_EXT_CTRL, &ctrl))
			break;

		if (ctrl.type == V4L2_CTRL_TYPE_CTRL_CLASS ||
		    ctrl.flags & V4L2_CTRL_FLAG_DISABLED)
			continue;

		switch (ctrl.type) {
		case V4L2_CTRL_TYPE_INTEGER:
		case V4L2_CTRL_TYPE_BOOLEAN:
		case V4L2_CTRL_TYPE_MENU:
		case V4L2_CTRL_TYPE_BUTTON:
		case V4L2_CTRL_TYPE_INTEGER64:
		case V4L2_CTRL_TYPE_BITMASK:
		case V4L2_CTRL_TYPE_INTEGER_MENU:
		case V4L2_CTRL_TYPE_U8:
			break;
		/* \todo Support other control types. */
		default:
			LOG(V4L2, Debug)
				<< "Control " << utils::hex(ctrl.id)
				<< " has unsupported type " << ctrl.type;
			continue;
		}

		controlIds_.emplace_back(std::make_unique<V4L2ControlId>(ctrl));
		controlInfo_.emplace(ctrl.id, ctrl);

		ctrls.emplace(controlIds_.back().get(), V4L2ControlInfo(ctrl));
	}

	controls_ = std::move(ctrls);
}

/*
 * \brief Update the value of the first \a count V4L2 controls in \a ctrls using
 * values in \a v4l2Ctrls
 * \param[inout] ctrls List of V4L2 controls to update
 * \param[in] v4l2Ctrls List of V4L2 extended controls as returned by the driver
 * \param[in] count The number of controls to update
 */
void V4L2Device::updateControls(ControlList *ctrls,
				const struct v4l2_ext_control *v4l2Ctrls,
				unsigned int count)
{
	unsigned int i = 0;
	for (auto &ctrl : *ctrls) {
		if (i == count)
			break;

		const struct v4l2_ext_control *v4l2Ctrl = &v4l2Ctrls[i];
		unsigned int id = ctrl.first;
		ControlValue &value = ctrl.second;

		const auto iter = controls_.find(id);
		switch (iter->first->type()) {
		case ControlTypeInteger64:
			value.set<int64_t>(v4l2Ctrl->value64);
			break;

		case ControlTypeByte:
			/*
			 * No action required, the VIDIOC_[GS]_EXT_CTRLS ioctl
			 * accessed the ControlValue storage directly.
			 */
			break;

		default:
			/*
			 * \todo To be changed when support for string controls
			 * will be added.
			 */
			value.set<int32_t>(v4l2Ctrl->value);
			break;
		}

		i++;
	}
}

} /* namespace libcamera */