/* SPDX-License-Identifier: LGPL-2.1-or-later */ /* * Copyright (C) 2021, Ideas On Board * * awb.cpp - AWB control algorithm */ #include "awb.h" #include <algorithm> #include <cmath> #include <libcamera/base/log.h> /** * \file awb.h */ namespace libcamera { namespace ipa::ipu3::algorithms { LOG_DEFINE_CATEGORY(IPU3Awb) /* * When zones are used for the grey world algorithm, they are only considered if * their average green value is at least 16/255 (after black level subtraction) * to exclude zones that are too dark and don't provide relevant colour * information (on the opposite side of the spectrum, saturated regions are * excluded by the ImgU statistics engine). */ static constexpr uint32_t kMinGreenLevelInZone = 16; /* * Minimum proportion of non-saturated cells in a zone for the zone to be used * by the AWB algorithm. */ static constexpr double kMaxCellSaturationRatio = 0.8; /* * Maximum ratio of saturated pixels in a cell for the cell to be considered * non-saturated and counted by the AWB algorithm. */ static constexpr uint32_t kMinCellsPerZoneRatio = 255 * 90 / 100; /** * \struct Accumulator * \brief RGB statistics for a given zone * * Accumulate red, green and blue values for each non-saturated item over a * zone. Items can for instance be pixels, but also the average of groups of * pixels, depending on who uses the accumulator. * \todo move this description and structure into a common header * * Zones which are saturated beyond the threshold defined in * ipu3_uapi_awb_config_s are not included in the average. * * \var Accumulator::counted * \brief Number of unsaturated cells used to calculate the sums * * \var Accumulator::sum * \brief A structure containing the average red, green and blue sums * * \var Accumulator::sum.red * \brief Sum of the average red values of each unsaturated cell in the zone * * \var Accumulator::sum.green * \brief Sum of the average green values of each unsaturated cell in the zone * * \var Accumulator::sum.blue * \brief Sum of the average blue values of each unsaturated cell in the zone */ /** * \struct Awb::AwbStatus * \brief AWB parameters calculated * * The AwbStatus structure is intended to store the AWB * parameters calculated by the algorithm * * \var AwbStatus::temperatureK * \brief Color temperature calculated * * \var AwbStatus::redGain * \brief Gain calculated for the red channel * * \var AwbStatus::greenGain * \brief Gain calculated for the green channel * * \var AwbStatus::blueGain * \brief Gain calculated for the blue channel */ /* Default settings for Bayer noise reduction replicated from the Kernel */ static const struct ipu3_uapi_bnr_static_config imguCssBnrDefaults = { .wb_gains = { 16, 16, 16, 16 }, .wb_gains_thr = { 255, 255, 255, 255 }, .thr_coeffs = { 1700, 0, 31, 31, 0, 16 }, .thr_ctrl_shd = { 26, 26, 26, 26 }, .opt_center = { -648, 0, -366, 0 }, .lut = { { 17, 23, 28, 32, 36, 39, 42, 45, 48, 51, 53, 55, 58, 60, 62, 64, 66, 68, 70, 72, 73, 75, 77, 78, 80, 82, 83, 85, 86, 88, 89, 90 } }, .bp_ctrl = { 20, 0, 1, 40, 0, 6, 0, 6, 0 }, .dn_detect_ctrl = { 9, 3, 4, 0, 8, 0, 1, 1, 1, 1, 0 }, .column_size = 1296, .opt_center_sqr = { 419904, 133956 }, }; /* Default color correction matrix defined as an identity matrix */ static const struct ipu3_uapi_ccm_mat_config imguCssCcmDefault = { 8191, 0, 0, 0, 0, 8191, 0, 0, 0, 0, 8191, 0 }; /** * \class Awb * \brief A Grey world white balance correction algorithm * * The Grey World algorithm assumes that the scene, in average, is neutral grey. * Reference: Lam, Edmund & Fung, George. (2008). Automatic White Balancing in * Digital Photography. 10.1201/9781420054538.ch10. * * The IPU3 generates statistics from the Bayer Down Scaler output into a grid * defined in the ipu3_uapi_awb_config_s structure. * * - Cells are defined in Pixels * - Zones are defined in Cells * * 80 cells * /───────────── 1280 pixels ───────────\ * 16 zones * 16 * ┌────┬────┬────┬────┬────┬─ ──────┬────┐ \ * │Cell│ │ │ │ │ | │ │ │ * 16 │ px │ │ │ │ │ | │ │ │ * ├────┼────┼────┼────┼────┼─ ──────┼────┤ │ * │ │ │ │ │ │ | │ │ * │ │ │ │ │ │ | │ │ 7 * │ ── │ ── │ ── │ ── │ ── │ ── ── ─┤ ── │ 1 2 4 * │ │ │ │ │ │ | │ │ 2 0 5 * * │ │ │ │ │ │ | │ │ z p c * ├────┼────┼────┼────┼────┼─ ──────┼────┤ o i e * │ │ │ │ │ │ | │ │ n x l * │ │ | │ │ e e l * ├─── ───┼─ ──────┼────┤ s l s * │ │ | │ │ s * │ │ | │ │ * ├─── Zone of Cells ───┼─ ──────┼────┤ │ * │ (5 x 4) │ | │ │ │ * │ │ | │ │ │ * ├── ───┼─ ──────┼────┤ │ * │ │ │ | │ │ │ * │ │ │ │ │ │ | │ │ │ * └────┴────┴────┴────┴────┴─ ──────┴────┘ / * * * In each cell, the ImgU computes for each colour component the average of all * unsaturated pixels (below a programmable threshold). It also provides the * ratio of saturated pixels in the cell. * * The AWB algorithm operates on a coarser grid, made by grouping cells from the * hardware grid into zones. The number of zones is fixed to \a kAwbStatsSizeX x * \a kAwbStatsSizeY. For example, a frame of 1280x720 is divided into 80x45 * cells of [16x16] pixels and 16x12 zones of [5x4] cells each * (\a kAwbStatsSizeX=16 and \a kAwbStatsSizeY=12). If the number of cells isn't * an exact multiple of the number of zones, the right-most and bottom-most * cells are ignored. The grid configuration is computed by * IPAIPU3::calculateBdsGrid(). * * Before calculating the gains, the algorithm aggregates the cell averages for * each zone in generateAwbStats(). Cells that have a too high ratio of * saturated pixels are ignored, and only zones that contain enough * non-saturated cells are then used by the algorithm. * * The Grey World algorithm will then estimate the red and blue gains to apply, and * store the results in the metadata. The green gain is always set to 1. */ Awb::Awb() : Algorithm() { asyncResults_.blueGain = 1.0; asyncResults_.greenGain = 1.0; asyncResults_.redGain = 1.0; asyncResults_.temperatureK = 4500; zones_.reserve(kAwbStatsSizeX * kAwbStatsSizeY); } Awb::~Awb() = default; /** * \copydoc libcamera::ipa::Algorithm::configure */ int Awb::configure(IPAContext &context, [[maybe_unused]] const IPAConfigInfo &configInfo) { const ipu3_uapi_grid_config &grid = context.configuration.grid.bdsGrid; stride_ = context.configuration.grid.stride; cellsPerZoneX_ = std::round(grid.width / static_cast<double>(kAwbStatsSizeX)); cellsPerZoneY_ = std::round(grid.height / static_cast<double>(kAwbStatsSizeY)); /* * Configure the minimum proportion of cells counted within a zone * for it to be relevant for the grey world algorithm. * \todo This proportion could be configured. */ cellsPerZoneThreshold_ = cellsPerZoneX_ * cellsPerZoneY_ * kMaxCellSaturationRatio; LOG(IPU3Awb, Debug) << "Threshold for AWB is set to " << cellsPerZoneThreshold_; return 0; } /** * The function estimates the correlated color temperature using * from RGB color space input. * In physics and color science, the Planckian locus or black body locus is * the path or locus that the color of an incandescent black body would take * in a particular chromaticity space as the blackbody temperature changes. * * If a narrow range of color temperatures is considered (those encapsulating * daylight being the most practical case) one can approximate the Planckian * locus in order to calculate the CCT in terms of chromaticity coordinates. * * More detailed information can be found in: * https://en.wikipedia.org/wiki/Color_temperature#Approximation */ uint32_t Awb::estimateCCT(double red, double green, double blue) { /* Convert the RGB values to CIE tristimulus values (XYZ) */ double X = (-0.14282) * (red) + (1.54924) * (green) + (-0.95641) * (blue); double Y = (-0.32466) * (red) + (1.57837) * (green) + (-0.73191) * (blue); double Z = (-0.68202) * (red) + (0.77073) * (green) + (0.56332) * (blue); /* Calculate the normalized chromaticity values */ double x = X / (X + Y + Z); double y = Y / (X + Y + Z); /* Calculate CCT */ double n = (x - 0.3320) / (0.1858 - y); return 449 * n * n * n + 3525 * n * n + 6823.3 * n + 5520.33; } /* Generate an RGB vector with the average values for each zone */ void Awb::generateZones() { zones_.clear(); for (unsigned int i = 0; i < kAwbStatsSizeX * kAwbStatsSizeY; i++) { RGB zone; double counted = awbStats_[i].counted; if (counted >= cellsPerZoneThreshold_) { zone.G = awbStats_[i].sum.green / counted; if (zone.G >= kMinGreenLevelInZone) { zone.R = awbStats_[i].sum.red / counted; zone.B = awbStats_[i].sum.blue / counted; zones_.push_back(zone); } } } } /* Translate the IPU3 statistics into the default statistics zone array */ void Awb::generateAwbStats(const ipu3_uapi_stats_3a *stats) { /* * Generate a (kAwbStatsSizeX x kAwbStatsSizeY) array from the IPU3 grid which is * (grid.width x grid.height). */ for (unsigned int cellY = 0; cellY < kAwbStatsSizeY * cellsPerZoneY_; cellY++) { for (unsigned int cellX = 0; cellX < kAwbStatsSizeX * cellsPerZoneX_; cellX++) { uint32_t cellPosition = cellY * stride_ + cellX; uint32_t zoneX = cellX / cellsPerZoneX_; uint32_t zoneY = cellY / cellsPerZoneY_; uint32_t awbZonePosition = zoneY * kAwbStatsSizeX + zoneX; /* Cast the initial IPU3 structure to simplify the reading */ const ipu3_uapi_awb_set_item *currentCell = reinterpret_cast<const ipu3_uapi_awb_set_item *>( &stats->awb_raw_buffer.meta_data[cellPosition] ); /* * Use cells which have less than 90% * saturation as an initial means to include * otherwise bright cells which are not fully * saturated. * * \todo The 90% saturation rate may require * further empirical measurements and * optimisation during camera tuning phases. */ if (currentCell->sat_ratio <= kMinCellsPerZoneRatio) { /* The cell is not saturated, use the current cell */ awbStats_[awbZonePosition].counted++; uint32_t greenValue = currentCell->Gr_avg + currentCell->Gb_avg; awbStats_[awbZonePosition].sum.green += greenValue / 2; awbStats_[awbZonePosition].sum.red += currentCell->R_avg; awbStats_[awbZonePosition].sum.blue += currentCell->B_avg; } } } } void Awb::clearAwbStats() { for (unsigned int i = 0; i < kAwbStatsSizeX * kAwbStatsSizeY; i++) { awbStats_[i].sum.blue = 0; awbStats_[i].sum.red = 0; awbStats_[i].sum.green = 0; awbStats_[i].counted = 0; } } void Awb::awbGreyWorld() { LOG(IPU3Awb, Debug) << "Grey world AWB"; /* * Make a separate list of the derivatives for each of red and blue, so * that we can sort them to exclude the extreme gains. We could * consider some variations, such as normalising all the zones first, or * doing an L2 average etc. */ std::vector<RGB> &redDerivative(zones_); std::vector<RGB> blueDerivative(redDerivative); std::sort(redDerivative.begin(), redDerivative.end(), [](RGB const &a, RGB const &b) { return a.G * b.R < b.G * a.R; }); std::sort(blueDerivative.begin(), blueDerivative.end(), [](RGB const &a, RGB const &b) { return a.G * b.B < b.G * a.B; }); /* Average the middle half of the values. */ int discard = redDerivative.size() / 4; RGB sumRed(0, 0, 0); RGB sumBlue(0, 0, 0); for (auto ri = redDerivative.begin() + discard, bi = blueDerivative.begin() + discard; ri != redDerivative.end() - discard; ri++, bi++) sumRed += *ri, sumBlue += *bi; double redGain = sumRed.G / (sumRed.R + 1), blueGain = sumBlue.G / (sumBlue.B + 1); /* Color temperature is not relevant in Grey world but still useful to estimate it :-) */ asyncResults_.temperatureK = estimateCCT(sumRed.R, sumRed.G, sumBlue.B); asyncResults_.redGain = redGain; /* Hardcode the green gain to 1.0. */ asyncResults_.greenGain = 1.0; asyncResults_.blueGain = blueGain; } void Awb::calculateWBGains(const ipu3_uapi_stats_3a *stats) { ASSERT(stats->stats_3a_status.awb_en); clearAwbStats(); generateAwbStats(stats); generateZones(); LOG(IPU3Awb, Debug) << "Valid zones: " << zones_.size(); if (zones_.size() > 10) { awbGreyWorld(); LOG(IPU3Awb, Debug) << "Gain found for red: " << asyncResults_.redGain << " and for blue: " << asyncResults_.blueGain; } } /** * \copydoc libcamera::ipa::Algorithm::process */ void Awb::process(IPAContext &context, const ipu3_uapi_stats_3a *stats) { calculateWBGains(stats); /* * Gains are only recalculated if enough zones were detected. * The results are cached, so if no results were calculated, we set the * cached values from asyncResults_ here. */ context.frameContext.awb.gains.blue = asyncResults_.blueGain; context.frameContext.awb.gains.green = asyncResults_.greenGain; context.frameContext.awb.gains.red = asyncResults_.redGain; context.frameContext.awb.temperatureK = asyncResults_.temperatureK; } constexpr uint16_t Awb::threshold(float value) { /* AWB thresholds are in the range [0, 8191] */ return value * 8191; } /** * \copydoc libcamera::ipa::Algorithm::prepare */ void Awb::prepare(IPAContext &context, ipu3_uapi_params *params) { /* * Green saturation thresholds are reduced because we are using the * green channel only in the exposure computation. */ params->acc_param.awb.config.rgbs_thr_r = threshold(1.0); params->acc_param.awb.config.rgbs_thr_gr = threshold(0.9); params->acc_param.awb.config.rgbs_thr_gb = threshold(0.9); params->acc_param.awb.config.rgbs_thr_b = threshold(1.0); /* * Enable saturation inclusion on thr_b for ImgU to update the * ipu3_uapi_awb_set_item->sat_ratio field. */ params->acc_param.awb.config.rgbs_thr_b |= IPU3_UAPI_AWB_RGBS_THR_B_INCL_SAT | IPU3_UAPI_AWB_RGBS_THR_B_EN; const ipu3_uapi_grid_config &grid = context.configuration.grid.bdsGrid; params->acc_param.awb.config.grid = context.configuration.grid.bdsGrid; /* * Optical center is column start (respectively row start) of the * cell of interest minus its X center (respectively Y center). * * For the moment use BDS as a first approximation, but it should * be calculated based on Shading (SHD) parameters. */ params->acc_param.bnr = imguCssBnrDefaults; Size &bdsOutputSize = context.configuration.grid.bdsOutputSize; params->acc_param.bnr.column_size = bdsOutputSize.width; params->acc_param.bnr.opt_center.x_reset = grid.x_start - (bdsOutputSize.width / 2); params->acc_param.bnr.opt_center.y_reset = grid.y_start - (bdsOutputSize.height / 2); params->acc_param.bnr.opt_center_sqr.x_sqr_reset = params->acc_param.bnr.opt_center.x_reset * params->acc_param.bnr.opt_center.x_reset; params->acc_param.bnr.opt_center_sqr.y_sqr_reset = params->acc_param.bnr.opt_center.y_reset * params->acc_param.bnr.opt_center.y_reset; /* Convert to u3.13 fixed point values */ params->acc_param.bnr.wb_gains.gr = 8192 * context.frameContext.awb.gains.green; params->acc_param.bnr.wb_gains.r = 8192 * context.frameContext.awb.gains.red; params->acc_param.bnr.wb_gains.b = 8192 * context.frameContext.awb.gains.blue; params->acc_param.bnr.wb_gains.gb = 8192 * context.frameContext.awb.gains.green; LOG(IPU3Awb, Debug) << "Color temperature estimated: " << asyncResults_.temperatureK; /* The CCM matrix may change when color temperature will be used */ params->acc_param.ccm = imguCssCcmDefault; params->use.acc_awb = 1; params->use.acc_bnr = 1; params->use.acc_ccm = 1; } } /* namespace ipa::ipu3::algorithms */ } /* namespace libcamera */