| Age | Commit message (Collapse) | Author |
|---|
|
The ipa_data_serializer_test is configured to be able to run in parallel
with other tests.
If the test tries to acquire the VIMC sensor B while it is in use, it
would skip require skipping the test.
Instead, inform meson that it can not be run in parallel to ensure that
the test is able to obtain the resources it requires for execution.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
v4l2-compliance changed their version string:
v4l2-compliance 1.21.0-4618
v4l2-compliance SHA: cc211b76476aca2c072ffa83a9b003957d5f3909, 64 bits, 64-bit time_t
v4l2-compliance 1.21.0-4838, 64 bits, 64-bit time_t
The current parsing takes the last result of split, which works for the
former, but not the latter. Take the second result of split instead, and
strip away any commas.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The destructor tried to check if pipeline_ is a parent of libcameraSrc_.
This was needed to be checked as if it is, cleanup of libcameraSrc_
would be handled by pipeline itself.
Since, the destructor can be called anytime, even when pipeline_ hasn't
been created, the use of pipeline_ to check if libcameraSrc_ has an
ancestor as pipeline_ caused a segmentation fault.
Fixes: f58768092277 ("test: gstreamer: Fix the destructor of GstreamerTest base class")
Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
A lot of code used in the single stream test is boiler plate and common
across every gstreamer test. Factor out this code into a base class
called GstreamerTest.
Also update the gstreamer_single_stream_test to use the GstreamerTest
base class.
Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The V4L2VideoDevice::toV4L2PixelFormat() function is incorrectly
implemented, as it will pick a multi-planar format if the device
supports the multi-planar API, even if only single-planar formats are
supported. This currently works because the implementation calls
V4L2PixelFormat::fromPixelFormat(), which ignores the multiplanar
argument and always returns a single-planar format.
Fixing this isn't trivial. As we don't need to support multi-planar V4L2
formats at this point, drop the function instead of pretending
everything is fine, and call V4L2PixelFormat::fromPixelFormat() directly
from pipeline handlers. As the single-planar case is the most common,
set the multiplanar argument to false by default to avoid long lines.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
The index generated by utils::enumerate() is an iteration counter, which
should thus be positive. Use std::size_t instead of the difference_type
of the container.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Many signals used in internal and public APIs carry the emitter pointer
as a signal argument. This was done to allow slots connected to multiple
signal instances to differentiate between emitters. While starting from
a good intention of facilitating the implementation of slots, it turned
out to be a bad API design as the signal isn't meant to know what it
will be connected to, and thus shouldn't carry parameters that are
solely meant to support a use case specific to the connected slot.
These pointers turn out to be unused in all slots but one. In the only
case where it is needed, it can be obtained by wrapping the slot in a
lambda function when connecting the signal. Do so, and drop the emitter
pointer from all signals.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
In many cases, the emitter object passed as a pointer from signals to
slots is also available as a class member. Use the class member when
this occurs, to prepare for removal of the emitter object pointer from
signals.
In test/event.cpp, this additionally requires moving the EventNotifier
to a class member.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
It can be useful to connect a signal to a functor, and in particular a
lambda function, while still operating in the context of a receiver
object (to support both object-based disconnection and queued
connections to Object instances).
Add a BoundMethodFunctor class to bind a functor, and a corresponding
Signal::connect() function. There is no corresponding disconnect()
function, as a lambda passed to connect() can't be later passed to
disconnect(). Disconnection typically uses disconnect(T *object), which
will cover the vast majority of use cases.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
When disconnecting a signal from a receiver, it is usually not necessary
to specify the receiver's slot function explicitly, as the signal is
often connected to a single slot for a given receiver. We can thus use a
simpler version of Signal::disconnect() that takes a pointer to the
receiver object only. This reduces code size, as the disconnect()
function is a template function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The V4L2 compat test runs v4l2-ctl and v4l2-compliance with
v4l2-compat.so preloaded. If libcamera is compiled with the address
sanitizer enabled, the ASan library will be loaded due to preloading
v4l2-compat.so. This however doesn't occur early enough in the dynamic
linking process due to the v4l2 executables not being themselves linked
to the ASan runtime, which causes ASan to abort with
==2198==ASan runtime does not come first in initial library list; you should either link runtime to your application or manually preload it with LD_PRELOAD.
Using LD_PRELOAD to load the ASan runtime would fix this issue, but it
requires knowing the absolute path to the ASan shared object. This is
compiler-dependent and for clang, architecture-dependent as well.
Until we figure out how to safely retrieve that information, disable the
test when ASan is enabled as a quick fix.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
In CameraSensor, the mbusCodes() and sizes() accessor functions
retrieves all the supported media bus codes and the supported sizes
respectively. However, this is quite limiting since the caller
probably isn't in a position to match which range of sizes are
supported for a particular mbusCode.
Hence, the caller is most likely interested to know about the sizes
supported for a particular media bus code. This patch transforms the
existing CameraSensor::sizes() to CameraSensor::sizes(mbuscode) to
achieve that goal.
The patch also transforms existing CIO2Device::sizes() in IPU3 pipeline
handler to CIO2Device::sizes(PixelFormat) on a similar principle. The
function is then plumbed to CameraSensor::sizes(mbusCode) to enumerate
the per-format sizes as required in
PipelineHandlerIPU3::generateConfiguration().
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
ASan needs to be loaded first before gstreamer is loaded. This was not
possible, so verify_asan_link_order was disabled. Better way to tackle
this issue was disabling forks on the gstreamer side.
verify_asan_link_order=0 disables the check on ASan side which checks if
ASan was loaded before any other shared objects. Since, gstreamer spawns
a child helper process while building the registry, we needed to disable
this check. But with gst_registry_fork_set_enabled() it is possible to
disable spawning this child helper process, so this ensures that ASan is
loaded before any other shared object is loaded.
Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This patch simplifies memory management, i.e., by replacing bare
pointers with g_autoptr or g_autofree according to use case.
While at it also update time representation of timeout variable with
GST_SECOND.
Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Regarding (de)serialization in isolated IPA calls, we have four layers:
- struct
- byte vector + fd vector
- IPCMessage
- IPC payload
The proxy handles the upper three layers (with help from the
IPADataSerializer), and passes an IPCMessage to the IPC mechanism
(implemented as an IPCPipe), which sends an IPC payload to its worker
counterpart.
When a FileDescriptor is involved, previously it was only a
FileDescriptor in the first layer; in the lower three it was an int. To
reduce the risk of potential fd leaks in the future, keep the
FileDescriptor as-is throughout the upper three layers. Only the IPC
mechanism will deal with ints, if it so wishes, when it does the actual
IPC. IPCPipeUnixSocket does deal with ints for sending fds, so the
conversion between IPCMessage and IPCUnixSocket::Payload converts
between FileDescriptor and int.
Additionally, change the data portion of the serialized form of
FileDescriptor to a 32-bit unsigned integer, for alightnment purposes
and in preparation for conversion to an index into the fd array.
Also update the deserializer of FrameBuffer::Plane accordingly.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Development and usage of isolated IPA's has identified bugs in the
transmission of the file descriptors between the pipeline handler and
the IPA through.
Add tests to identify these bugs and prevent regressions.
This tests basically checks for two things:
- Camera reconfigurations without stopping CameraManager
- Fd leaks across IPA IPC boundary [1]
Currently, it uses vimc, but can be easily changed to using another
platform (for e.g. IPU3) by changing kCamId_ and kIpaProxyName_.
The test performs kNumOfReconfigures_ (currently set to 10)
reconfigurations of the camera. Each reconfiguration runs
start(), capture(100ms), stop() of the camera. Hence, the test
runs approximately for 1 second.
For checking the fd leaks, the test monitors the /proc/$PROXY_PID/fd
directory for open fds. It compares the number of open fds after each
run to the number of open fds before the first run. If those two are
found to be mis-matched, the test shall report failure.
The test validates IPA IPC code paths which are used when the IPA is run
in isolated mode. The CameraTest is constructed with the isolate flag
set to enforce this.
[1] https://bugs.libcamera.org/show_bug.cgi?id=63
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Some tests might require to have LIBCAMERA_IPA_FORCE_ISOLATION set
to ensure they can test the IPA running in isolated mode. These tests
are likely to leverage CameraTest. The environment variable should
be set before CameraManager::start() call which happens in CameraTest's
constructor. Hence, plumb the constructor with a flag so that the
LIBCAMERA_IPA_FORCE_ISOLATION can be set before CameraManager::start().
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This patch adds a test to test if single stream using libcamera's
gstreamer element works.
We need to work around two distinct issues with ASan when enabled in the
build:
- glib has a known leak at initialization time. This is covered by the
suppression file shipped with glib, but it's not clear how to use it
automatically. For now, disable leak detection to avoid test failures.
- GStreamer spawns a child process to scan plugins. If GStreamer is
compiled without ASan (which is likely) but libcamera is, dlopen()ing
the libcamera plugin will cause an ASan link order verification
failure. Disable the verification child processes to work around the
problem. This requires gcc 8 or newer.
Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Test that lookup by ControlId reference works in the control
serialization test making sure that the control limits are not changed by
de-serialization.
The test currently fails and demonstates that lookup by ControlId is
currently not supported until the introduction of the next patch.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
ControlInfoMap does not have a ControlId map associated, but rather
creates one with the generateIdMap() function at creation time.
As a consequence, when in the need to de-serialize a ControlInfoMap all
the ControlId it contains are created by the deserializer instance, not
being able to discern if the controls the ControlIdMap refers to are the
global libcamera controls (and properties) or instances local to the
V4L2 device that has first initialized the controls.
As a consequence the ControlId stored in a de-serialized map will always
be newly created entities, preventing lookup by ControlId reference on a
de-serialized ControlInfoMap.
In order to make it possible to use globally available ControlId
instances whenever possible, create ControlInfoMap with a reference to
an externally allocated ControlIdMap instead of generating one
internally.
As a consequence the class constructors take and additional argument,
which might be not pleasant to type in, but enforces the concepts that
ControlInfoMap should be created with controls part of the same id map.
As the ControlIdMap the ControlInfoMap refers to needs to be allocated
externally:
- Use the globally available controls::controls (or
properties::properties) id map when referring to libcamera controls
- The V4L2 device that creates ControlInfoMap by parsing the device's
controls has to allocate a ControlIdMap
- The ControlSerializer that de-serializes a ControlInfoMap has to
create and store the ControlIdMap the de-serialized info map refers to
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove the need for callers to reference PROT_READ/PROT_WRITE directly
from <sys/mman.h> by instead exposing the Read/Write mapping options as
flags from the MappedFrameBuffer class itself.
While here, introduce the <stdint.h> header which is required for the
uint8_t as part of the Plane.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The MappedFrameBuffer is a convenience feature which sits on top of the
FrameBuffer and facilitates mapping it to CPU accessible memory with
mmap.
This implementation is internal and currently sits in the same internal
files as the internal FrameBuffer, thus exposing those internals to
users of the MappedFramebuffer implementation.
Move the MappedFrameBuffer and MappedBuffer implementation to its own
implementation files, and fix the sources throughout to use that
accordingly.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Usage of 'method' to refer to member functions comes from Java. The C++
standard uses the term 'function' only. Replace 'method' with 'function'
or 'member function' through the whole code base and documentation.
While at it, fix two typos (s/backeng/backend/).
The BoundMethod and Object::invokeMethod() are left as-is here, and will
be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add type safety by turning the MapFlag and OpenModeFlag enum into enum
class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add tests that exercise the whole API of the Flags class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
It would be convenient to be able to iterate over available boolean
values, for example for controls that designate if some function can be
enabled/disabled. The current min/max/def constructor is insufficient,
as .values() is empty, so the values cannot be easily iterated over, and
creating a Span of booleans does not work for the values constructor.
Add new constructors to ControlInfo that takes a set of booleans (if
both booleans are valid values) plus a default, and another that takes
only one boolean (if only one boolean is a valid value).
Update the ControlInfo test accordingly.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
libcamera names header files based on the classes they define. The
buffer.h file is an exception. Rename it to framebuffer.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Thread::dispatchMessages() function needs to support recursive
calls, for instance to allow flushing delivery of invoked methods. Add a
corresponding test, which currently fails with a double free.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Make Camera::stop() idempotent so that it can be called in any state and
consecutive times. When called in any state other than CameraRunning, it
is a no-op. This simplifies the cleanup path for applications.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
If LIBCAMERA_BASE_PRIVATE is ever exposed on the libcamera public dependencies,
then the private.h header protection will be circumvented.
Provide a test which will fail (at compile time) if the LIBCAMERA_BASE_PRIVATE
define ever leaks to the public dependencies.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that we have a libcamera_private, make the public only dependency
libcamera_public so that it is clear which interface is being linked.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Headers which must not be exposed as part of the public libcamera API
should include base/private.h.
Any interface which includes the private.h header will only be able to
build if the libcamera_private dependency is used (or the
libcamera_base_private dependency directly).
Build targets which are intended to use the private API's will use the
libcamera_private to handle the automatic definition of the inclusion
guard.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move span, and adjust the Doxygen exclusion as well.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the event notifier, and associated header updates.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The File abstraction is a base helper and not part of the libcamera
API. Move it to to allow usage by users of the base library.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the functionality for the following components to the new
base support library:
- BoundMethod
- EventDispatcher
- EventDispatcherPoll
- Log
- Message
- Object
- Signal
- Semaphore
- Thread
- Timer
While it would be preferable to see these split to move one component
per commit, these components are all interdependent upon each other,
which leaves us with one big change performing the move for all of them.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the utils functionality to the libcamera/base library.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
A new utils::Duration class is defined to represent a std::chrono::duration type
with double precision nanosecond timebase. Using a double minimises the loss of
precision when converting timebases. This helper class may be used by IPAs to
represent variables such as frame durations and exposure times.
An operator << overload is defined to help with displaying utils::Duration value
in stream objects. Currently, this will display the duration value in
microseconds.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The recent merge (and revert) of commit 34bee5e84ecb ("libcamera:
V4L2Device: Remove the controls order assumption in updateControls()")
showed that 64-bit controls were missing from unit tests.
Fix this by testing the VIVID_CID_INTEGER64 control in the V4L2 video
device controls test.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Fix compiler warning about variable use before being initialized that
appears with gcc 11.1.0.
test/byte-stream-buffer.cpp:31:63: error: ‘data’ may be used uninitialized [-Werror=maybe-uninitialized]
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Range-based for loops are handy and widely preferred in C++, but are
limited in their ability to replace for loops that require access to a
loop counter. The enumerate() function solves this problem by wrapping
the iterable in an adapter that, when used as a range-expression, will
provide iterators whose value_type is a pair of index and value
reference.
The iterable must support std::begin() and std::end(). This includes all
containers provided by the standard C++ library, as well as C-style
arrays.
A typical usage pattern would use structured binding to store the index
and value in two separate variables:
std::vector<int> values = ...;
for (auto [index, value] : utils::enumerate(values)) {
...
}
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Test the ControlList::merge() method by creating a new list and
merging it with the existing one.
Test that the merged list contains all the controls, the existing values
do not get overwritten and the ones copied are not changed.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The current test verifies that after adding a new control to a list
already populated with one control the new one is present.
However the test wrongly tests for its presence twice instead of
making sure the existing control is still there.
Fix this by checking for the presence of both controls after the
update, and fix the error message accordingly.
Fixes: a8c40942b99e ("libcamera: controls: Improve the API towards applications")
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
libcamera internal headers are not available system-wide. Hence,
directive `#include <libcamera/internal/header.h>` is wrong. Fix it
by using "" for the #include directive.
Fixes: e09c487b97f8 ("test: Add unit tests for the BayerFormat class")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Verify that the begin() and rbegin() iterators (and their const version)
reference the correct values. The end() and rend() iterators can't be
tested the same way as they're not dereferenceable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The last instance of Thread allocated in the test is never deleted, nor
are other instances deleted in error paths. Use a std::unique_ptr<> to
ensure deletion.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Sebastian Fricke <sebastian.fricke@posteo.net>
|
|
Add the application and adaptation layers being built to the meson
summary. The summary now prints
libcamera 0.0.0
Configuration
Enabled pipelines: ipu3
raspberrypi
rkisp1
simple
uvcvideo
vimc
Android support: True
GStreamer support: True
V4L2 emulation support: True
cam application: True
qcam application: True
Unit tests: True
Subprojects
libyuv: YES
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Pass the sensor model string to the IPA init() method through the
IPASettings structure.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There was a typo in the unit test filename. Fix this typo, no other
functional change in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The recent fixes applied to DelayedControls change the behavior of the
library. As such, the tests ended up failing as they relied on the old
behavior of the helper. Update the tests to account for the new behavior
and get the tests passing again.
Specifically, the following changes have been made for each test:
singleControlNoDelay():
- Add a call to reset() to initialise internal DelayedControls state
only after setting the control on the device.
- Trigger a first frame start by calling applyControls() as a pipeline
handler would.
- Test frames from 1 onwards, as we will never have a queue item at
frame 0, since the reset() handles that.
singleControlWithDelay():
- Trigger a first frame start by calling applyControls() as a pipeline
handler would.
- Test frames from 1 onwards, as we will never have a queue item at
frame 0, since the reset() handles that.
dualControlsWithDelay() and dualControlsMultiQueue():
- Trigger a first frame start by calling applyControls() as a pipeline
handler would.
- Test frames from (startOffset + 1) onwards, as we will never have a
queue item at frame startOffset.
- Use the max delay (2 in this case) to determine the expected result
value.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
