| Age | Commit message (Collapse) | Author |
|---|
|
Update the properties parsing routine in the CameraSensor class to use
the newly defined V4L2 control V4L2_CID_CAMERA_ORIENTATION in place of
the downstream V4L2_CID_CAMERA_SENSOR_LOCATION which has now been
removed.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the newly added "fd move" constructor of the FileDescriptor class to
avoid dup() + close().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The FileDescriptor class, when constructed from a numerical file
descriptor, duplicates the file descriptor and takes ownership of the
copy. The caller has to close the original file descriptor manually if
needed. This is inefficient as the dup() and close() calls could be
avoided, but can also lead to resource leakage, as recently shown by
commit 353fc4c22322 ("libcamera: v4l2_videodevice: Fix dangling file
descriptor").
In an attempt to solve this problem, implement move semantics for the
FileDescriptor constructor. The constructor taking a numerical file
descriptor is split in two variants:
- A "fd copy" constructor that takes a const lvalue reference to a
numerical file descriptor and duplicates it (corresponding to the
current behaviour).
- A "fd move" constructor that takes a rvalue reference to a numerical
file descriptor and takes ownership of it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Several headers belonging to cam and qcam use __LIBCAMERA_*_H__ as a
header guard. They're not part of the libcamera core, use __CAM_*_H__
and __QCAM_*_H__ instead, similarly to all other headers of cam and
qcam.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The FileDescriptor constructor used in V4L2VideoDevice::exportDmabufFd()
creates a duplicate of the fd to store in the object. The original
fd returned by the VIDIOC_EXPBUF ioctl was never closed, and left
dangling. This would cause out of memory conditions if the camera stream
was repeatedly started and stopped.
This change closes the original fd explicitly, fixing the leak.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The list of public, IPA and internal header files are stored in three
meson variables, named libcamera_api, libcamera_ipa_api and
libcamera_headers respectively. The lack of uniformity is a bit
confusing. Fix it by renaming those variables to
libcamera_public_headers, libcamera_ipa_headers and
libcamera_internal_headers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPA headers are installed into $prefix/include/libcamera/ipa/, but
are located in the source tree in include/ipa/. This requires files
within libcamera to include them with
#include <ipa/foo.h>
while a third party IPA would need to use
#include <libcamera/ipa/foo.h>
Not only is this inconsistent, it can create issues later if IPA headers
need to include each other, as the first form of include directive
wouldn't be valid once the headers are installed.
Fix the problem by moving the IPA headers to include/libcamera/ipa/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The libcamera internal headers are located in src/libcamera/include/.
The directory is added to the compiler headers search path with a meson
include_directories() directive, and internal headers are included with
(e.g. for the internal semaphore.h header)
#include "semaphore.h"
All was well, until libcxx decided to implement the C++20
synchronization library. The __threading_support header gained a
#include <semaphore.h>
to include the pthread's semaphore support. As include_directories()
adds src/libcamera/include/ to the compiler search path with -I, the
internal semaphore.h is included instead of the pthread version.
Needless to say, the compiler isn't happy.
Three options have been considered to fix this issue:
- Use -iquote instead of -I. The -iquote option instructs gcc to only
consider the header search path for headers included with the ""
version. Meson unfortunately doesn't support this option.
- Rename the internal semaphore.h header. This was deemed to be the
beginning of a long whack-a-mole game, where namespace clashes with
system libraries would appear over time (possibly dependent on
particular system configurations) and would need to be constantly
fixed.
- Move the internal headers to another directory to create a unique
namespace through path components. This causes lots of churn in all
the existing source files through the all project.
The first option would be best, but isn't available to us due to missing
support in meson. Even if -iquote support was added, we would need to
fix the problem before a new version of meson containing the required
support would be released.
The third option is thus the only practical solution available. Bite the
bullet, and do it, moving headers to include/libcamera/internal/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The StaggeredCtrl class, part of the Raspberry Pi pipeline handler, is
part of libcamera. Move it to the libcamera namespace to simplify usage
of libcamera APIs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The StaggeredCtrl class has large functions, move them to a .cpp file
instead of inlining them all to reduce the binary size.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The ipa-sign-install.sh script, run when installing libcamera, signs all
IPA modules present in the module directory. This would result in
third-party modules being signed if any are present in the directory.
Fix it by explicitly passing the list of IPA modules to the
ipa-sign-install.sh script.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
|
|
In an attempt to clarify the license terms of all files in the libcamera
project, the build system files deserve particular attention. While they
describe how the binaries are created, they are not themselves
transformed into any part of binary distributions of the software, and
thus don't influence the copyright on the binary packages. They are
however subject to copyright, and thus influence the distribution terms
of the source packages.
Most of the meson.build files would not meet the threshold of
originality criteria required for copyright protection. Some of the more
complex meson.build files may be eligible for copyright protection. To
avoid any ambiguity and uncertainty, state our intent to not assert
copyrights on the build system files by putting them in the public
domain with the CC0-1.0 license.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Show Liu <show.liu@linaro.org>
|
|
The proxy worker is licensed under the GPL. It is compiled as a binary
separate from libcamera.so, and it is our understanding and intent that
the GPL license doesn't propagate to libcamera.so. However, as the
worker is executed by libcamera.so, the GPL license may cause concerns
in this context, regardless of whether the concerns are valid or not.
This uncertainty could be addressed by a combination of a legal review
and an explicit intent clarification from the copyright holders. A
simpler option is to relicense the code under the LGPL.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Add the Raspberry Pi pipeline handler and IPA as targets in the
meson build system.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Initial implementation of the Raspberry Pi (BCM2835) libcamera IPA and
associated libraries.
All code is licensed under the BSD-2-Clause terms.
Copyright (c) 2019-2020 Raspberry Pi Trading Ltd.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Initial implementation of the Raspberry Pi (BCM2835) ISP pipeline
handler.
All code is licensed under the BSD-2-Clause terms.
Copyright (c) 2019-2020 Raspberry Pi Trading Ltd.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Using find_program() to locate scripts part of the source tree causes
meson to print messages at setup time for each of those scripts:
Program ipa-sign.sh found: YES (/home/user/src/libcamera/src/ipa/ipa-sign.sh)
This pollutes the meson setup log with useless messages, as we know the
scripts are present. Use files() instead to avoid this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The simple pipeline handler rejects devices that have multiple capture
video nodes. There's no real reason to do so, a more dynamic approach is
possible as the pipeline handler already locates the video device by
walking the media graph.
Rework the match sequence by skipping any check on the video nodes, and
create the V4L2VideoDevice for the media entity at the end of the
pipeline when initializing the camera data. The V4L2VideoDevice
instances are managed by the pipeline handler itself, to avoid creating
separate instances in the camera data if multiple sensors are routed to
the same video device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add support for an optional format converter, supported by the
SimpleConverter class. If a converter is available for the pipeline, it
will be used to expose additional pixel formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The simple format converter supports V4L2 M2M devices that convert pixel
formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
This new pipeline handler aims at supporting any simple device without
requiring any device-specific code. Simple devices are currently defined
as a graph made of one or multiple camera sensors and a single video
node, with each sensor connected to the video node through a linear
pipeline.
The simple pipeline handler will automatically parse the media graph,
enumerate sensors, build supported stream configurations, and configure
the pipeline, without any device-specific knowledge. It doesn't support
configuration of any processing in the pipeline at the moment, but may
be extended to support simple processing such as format conversion or
scaling in the future.
The only device-specific information in the pipeline handler is the list
of supported drivers, required for device matching. We may be able to
remove this in the future by matching with the simple pipeline handler
as a last resort option, after all other pipeline handlers have been
tried.
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
|
|
Add support for the recent V4L2 extension to VIDIOC_ENUM_FMT that allows
filtering pixel formats by media bus codes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The camera3_hal.cpp is incorrectly licensed as GPL-2.0-or-later, instead
of LGPL-2.1-or-later as the rest of the HAL implementation. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The EXIF IFD is incorrectly chained to IFD 0 in addition to being a
referenced as a sub IFD through the EXIFIFD tag. While the libtiff API
doesn't clearly document why this happens, inspection of the
TIFFWriteDirectory() source code show that the function treats the IFD
being written as containing an image, which isn't correct for the EXIF
IFD. Use TIFFWriteCustomDirectory() instead, which fixes the problem.
The resulting DNG file can now be opened with darktable in addition to
rawtherapee.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The CameraSensor class assumes that camera sensors support the exact
same list of sizes of all media bus codes. While allowing a simpler API,
this assumption is incorrect and is blocking usage of some camera
sensors.
Relaxing the constraint is possible without changes to the CameraSensor
API syntax, but requires changing its semantics. The sizes() function
now returns the list of all sizes for all media bus codes, and the
getFormat() function now searches in all supported media bus codes. The
former is likely not the most useful option for pipeline handlers, but
the sizes() function is currently unused. Designing a better API will
require inspecting current and expected future use cases in pipeline
handlers to determine proper heuristics.
While at it, fix a small typo in an unrelated comment.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Todo statements should not end with a colon, remove it.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
While the DNG specification supports greyscale ("BlackIsZero") for
thumbnails, RawTherapee seems to have trouble reading them. Generate
thumbnails in RGB instead (but still with greyscale content, to avoid
having to interpolate colour components).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Populate the DNG black level, ISO speed rating and exposure time from
metadata. The ISO speed rating and exposure time are standardized as
EXIF tags, not TIFF tags, and require a separate EXIF IFD.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Generate a greyscale, 1/16 resolution thumbnail and add it to the DNG
file. This requires shuffling the RAW image generation as the thumbnail
has to be stored in the main IFD as per the DNG and TIFF/EP
specifications.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Name arguments to the FormatInfo::packScanline function pointer to make
it easier to understand its usage when reading the function declaration.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The DNG writer will use the metadata to populate DNG tags.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
While most camera sensors are exposed to userspace as a single subdev,
this is not always the case. A notable exception is the smiapp driver,
which exposes two or three subdevs. The subdev at the output of the
camera sensor will thus have more than one pad. Prepare for this by
removing the single-pad restriction, and locating the source pad
dynamically.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Avoid the need for a manual delete in the destructor by using a unique
pointer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The CameraSensor::logPrefix() function accesses the entity from the
subdev. Remove the level of indirection as we stored a pointer to the
entity internally.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
While reformatting the table the field name was missed for one entry,
add it.
Fixes: db7235b7141aa4e2 ("qcam: Add DNGWriter")
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a toolbar button that captures RAW data to disk. The button is only
enabled if the camera is configured to provide a raw stream to the
application.
Only when the capture action is triggered will a request with a raw
buffer be queued to the camera.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an initial DNG file writer. The writer can only deal with a small
set of pixel formats. The generated file is consumable by standard
tools. The writer needs to be extended to write more metadata to the
generated file.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Allow a second stream to be configured for raw capture. This change only
adds support for configuring and allocating buffers for the second
stream. Later changes are needed to queue the allocated buffers to the
camera when the user wishes to capture a raw frame.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Since the Linux kernel commit:
69e39d40587b ("media: vimc: Implement get/set selection in sink")
the crop rectangle on the VIMC scaler sink pad needs to be
reset to match the requested format to avoid hitting a pipeline format
misconfiguration when the applied format is larger than the one
set in a previous capture session.
As the V4L2 specification is not clear on what the correct behaviour
is, if the crop rectangle should be reset automatically or not on a
set_fmt operation, momentary fix the pipeline handler to please the
driver and manually reset the crop rectangle.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Store the MediaDevice for the VIMC instance in the VimcCameraData class.
This will be used to check the media device version at runtime.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a MediaDevice::version() function to expose the media device API
version number. This can be useful to support driver API changes in
pipeline handlers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Expose the image stride which may be retrieved after a video device
has been configured. It may only be retrieved at that point as the
assignment of video devices takes place at this point.
In the future video devices should be assigned at configuration
validation time and the stride value retrieved at that point.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If the camera can not generate a configuration from the requested roles
it returns a nullptr which leads to a nullptr dereference. Fix this by
adding a check that the camera generated a configuration before trying
to access it.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the StreamKeyValueParser helper to parse stream configuration from
the command line. This extends qcam to accept role hints and pixel
format in addition to a size.
Currently only one viewfinder stream is supported, add a check to keep
this behavior. Going forward this restriction will be lifted to support
more then one stream.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the StreamOptionsParser helper to parse stream configuration from
the command line.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Create a new helper class StreamKeyValueParser to parse command line
options describing stream configurations. The goal is to share this new
class between cam and qcam.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Extend OptionsBase<T> with a public invalidate() method. This allows for
further examination of the options and if found unsuitable be
invalidated. The intended user for this new interface are subclasses of
KeyValueParser.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Prepare for sub-classing of the KeyValueParser by making the parse()
method virtual.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When one of the camera is selected and opened from the
"Select Cameras" items list, the entry of the combo-box
in the main-window doesn't update its item index to reflect
the camera which was earlier selected. Fix that.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This commit introduces no functional changes.
This is required so that the combo-box list can be managed
conveniently from various private functions in subsequent
commit.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
