| Age | Commit message (Collapse) | Author |
|---|
|
When the configurations have been generated and validated, they can be
applied to a device.
Vivid supports only a single stream, so it directly obtains the first
StreamConfiguration from the CameraConfiguration.
The VIVID catpure device is a V4L2Video device, so we generate a
V4L2DeviceFormat to apply directly to the capture device node.
Note that we convert the libcamera Format stored in
cfg.pixelFormat to a V4L2PixelFormat using V4L2PixelFormat helper. This
currently defaults to the single-planar formats, and should be extended
to support the Multiplanar configuration from the V4L2Device.
[todo Repair the link between the multiplanar configuration of the
V4L2VideoDevice and the pixel format selection]
Following the call to set the format using the Kernel API, if the format
has been adjusted in any way by the kernel driver, then we have failed
to correctly handle the validation stages, and thus the configure
operation is idendified has having failed.
Finally stream specific data can be directly stored and set as
reflecting the state of the stream.
[NOTE: the cfg.setStream() call here associates the stream to the
StreamConfiguration however that should quite likely be done as part of
the validation process. TBD]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Implement the support for Generating and Validating the streams the
Camera can provide.
Vivid is a simple case with only a single stream.
Test the configurations can be generated and reported with cam -I:
"""
LIBCAMERA_LOG_LEVELS=Pipeline,VIVID:0 ./src/cam/cam -c 1 -I
[232:02:09.633067174] [2882911] INFO IPAManager ipa_manager.cpp:136 libcamera is not installed. Adding '/home//libcamera/build-vivid/src/ipa' to the IPA search path
[232:02:09.633332451] [2882911] WARN IPAManager ipa_manager.cpp:147 No IPA found in '/usr/local/lib/x86_64-linux-gnu/libcamera'
[232:02:09.633373414] [2882911] INFO Camera camera_manager.cpp:283 libcamera v0.0.11+714-d1ebd889-dirty
Using camera vivid
0: 1280x720-BGR888
* Pixelformat: NV21 (320x180)-(3840x2160)/(+0,+0)
- 320x180
- 640x360
- 640x480
- 1280x720
- 1920x1080
- 3840x2160
* Pixelformat: NV12 (320x180)-(3840x2160)/(+0,+0)
- 320x180
- 640x360
- 640x480
- 1280x720
- 1920x1080
- 3840x2160
* Pixelformat: BGRA8888 (320x180)-(3840x2160)/(+0,+0)
- 320x180
- 640x360
- 640x480
- 1280x720
- 1920x1080
- 3840x2160
* Pixelformat: RGBA8888 (320x180)-(3840x2160)/(+0,+0)
- 320x180
- 640x360
- 640x480
- 1280x720
- 1920x1080
- 3840x2160
"""
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Create a VividCameraData inheriting from the CameraData to handle camera
specific data, and use it to create and register the camera with the
CameraManager.
This can now be tested to see that the camera becomes available to
applications:
"""
LIBCAMERA_LOG_LEVELS=Pipeline,VIVID:0 ./src/cam/cam -l
[231:44:49.325333712] [2880028] INFO IPAManager ipa_manager.cpp:136 libcamera is not installed. Adding '/home/libcamera/build-vivid/src/ipa' to the IPA search path
[231:44:49.325428449] [2880028] WARN IPAManager ipa_manager.cpp:147 No IPA found in '/usr/local/lib/x86_64-linux-gnu/libcamera'
[231:44:49.325446253] [2880028] INFO Camera camera_manager.cpp:283 libcamera v0.0.11+713-d175334d-dirty
Available cameras:
1: vivid
"""
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Verify that we can match on our expected device(s).
Use a temporary debug print to check that the pipeline finds
our device:
"""
LIBCAMERA_LOG_LEVELS=Pipeline,VIVID:0 ./src/cam/cam -l
<snipped>
[230:51:10.670503423] [2872877] DEBUG VIVID vivid.cpp:81 Obtained Vivid Device
"""
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Explicitly disable the unused-parameter warning in this pipeline handler.
Parameters are left unused while they are introduced incrementally, so for
documentation purposes only we disable this warning so that we can compile
each commit independently without breaking the flow of the development
additions.
This is not recommended practice within libcamera, please listen to your
compiler warnings.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide all of the skeleton stubs to succesfully compile
and register a new Pipeline Handler for the Vivid test device.
Meson must be reconfigured to ensure that this pipeline handler is
included in the selected pipelines configuration, and after building, we
can test that the PipelineHandler is successfully registered by listing
the cameras on the system with LIBCAMERA_LOG_LEVELS enabled:
"""
LIBCAMERA_LOG_LEVELS=Pipeline:0 ./build-vivid/src/cam/cam -l
[230:30:03.624102821] [2867886] DEBUG Pipeline pipeline_handler.cpp:680 Registered pipeline handler "PipelineHandlerVivid"
Available cameras:
"""
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
uClibc doesn't provide the macros defining parameters for the file
sealing API. Define them manually as a work around.
Fixes: ea4baaacc325 ("libcamera: DmaBufAllocator: Support allocating from /dev/udmabuf")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
uClibc doesn't provide a memfd_create() implementation. Fix it by using
a direct syscall when the function isn't available.
Fixes: ea4baaacc325 ("libcamera: DmaBufAllocator: Support allocating from /dev/udmabuf")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Ensure that the memfd file descriptor won't be leaked to child processes
by creating it with MFD_CLOEXEC.
Fixes: ea4baaacc325 ("libcamera: DmaBufAllocator: Support allocating from /dev/udmabuf")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Set the default value of controls::rpi::StatsOutputEnable to false,
disabling the functionality. This stops unnecessary copies of the
statistics output ending up in the Request metdata if not needed.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Allow the DmaBufAllocator used by the software ISP to use memfd() +
/dev/udmabuf for the software ISP destination buffers.
This is useful on Linux distributions where normal users are not allowed
to access /dev/dma_heap/* while they are allowed to access /dev/udmabuf.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # Lenovo-x13s
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The dma-buf allocator currently allocates from CMA and system heaps.
Extend the dma-buf allocator to support allocating dma-buffers by creating
memfd-s and turning those into dma-buffers using /dev/udmabuf.
The buffers allocated through memfd/udmabuf are not suitable for zero-copy
buffer sharing with other devices.
Co-developed-by: Harvey Yang <chenghaoyang@chromium.org>
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # Lenovo-x13s
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Users of the DmaHeap class really just want some way to allocate
dma-buffers from userspace. This can also be done by using /dev/udmabuf
instead of using /dev/dma_heap/*.
Rename DmaHeap class to DmaBufAllocator in preparation of adding
/dev/udmabuf support.
And update the DmaHeap class docs to match including replacing references
to "dma-heap type" with "dma-buf provider".
This is a pure automated rename on the code ('s/DmaHeap/DmaBufAllocator/')
+ file renames + doc updates. There are no functional changes.
The DmaBufAllocator objects in vc4.cpp and software_isp.cpp are left named
dmaHeap_ to keep the changes to those 2 files to a minimum.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # Lenovo-x13s
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The subdev embedded data support series includes a change to the
VIDIOC_SUBDEV_G_ROUTING and VIDIOC_SUBDEV_S_ROUTING ioctls that impacts
the userspace API.
Update to the new API, while preserving backward compatibility to ease
the transition. Document the backward compatibility to only be supported
for two kernel releases. As the routing API isn't enabled in any
upstream kernel yet, users of the API need kernel patches, and are
expected to be able to upgrade quickly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Starting in kernel v5.16, the vimc driver stopped hardcoding the scaler
factor. Use this to lift constraints on the camera configuration, and in
particular on the exotic output size alignment to a multiple of 6. As a
result, vimc-based cameras can more easily match common display
resolutions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
TODO #4 was recorded at a time where the IPA module computed gain values
and the ISP computed the look up tables. The gains were higher-level
parameters. Now that the look up tables are computed in the IPA module,
the IPA and ISP are more tightly coupled and the TODO item is less
relevant.
Let's drop the TODO item. We may or may not need to switch to a
different representation in future but there is currently no good need
for this and the conversion of the values would be just waste of CPU
cycles.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The constant is used in a single place internally and doesn't belong to
DebayerParams anymore. Let's use 256 directly.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Constructing the color mapping tables is related to stats rather than
debayering, where they are applied. Let's move the corresponding code
to stats processing.
The same applies to the auxiliary gamma table. As the gamma value is
currently fixed and used in a single place, with the temporary exception
mentioned below, there is no need to share it anywhere anymore.
It's necessary to initialize SoftwareIsp::debayerParams_ to default
values. These initial values are used for the first two frames, before
they are changed based on determined stats. To avoid sharing the gamma
value constant in artificial ways, we use 0.5 directly in the
initialization. This all is not a particularly elegant thing to do,
such a code belongs conceptually to the similar code in stats
processing, but doing better is left for larger refactoring.
This is a preliminary step towards building this functionality on top of
libipa/algorithm.h, which should follow.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The white balance computation didn't consider black level. This is
wrong because then the computed ratios are off when they are computed
from the whole brightness range rather than the sensor range.
This patch adjusts white balance computation for the black level. There
is no need to change white balance application in debayering as this is
already applied after black level correction.
Exposure computation already subtracts black level, no changes are
needed there.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The documented range of values corresponds to uint8_t, so let's use that
type.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add helper functions for converting between floating point and fixed
point numbers. Also add tests for them.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
GCC 14 thinks `rects` is a "possibly dangling reference to a temporary":
/libcamera/src/android/camera_capabilities.cpp: In member function ‘int CameraCapabilities::initializeStaticMetadata()’:
/libcamera/src/android/camera_capabilities.cpp:1084:46: error: possibly dangling reference to a temporary [-Werror=dangling-reference]
1084 | const Span<const Rectangle>& rects =
| ^~~~~
/libcamera/src/android/camera_capabilities.cpp:1085:83: note: the temporary was destroyed at the end of the full expression ‘(& properties)->libcamera::ControlList::get<libcamera::Span<const libcamera::Rectangle> >(libcamera::properties::PixelArrayActiveAreas).std::optional<libcamera::Span<const libcamera::Rectangle> >::value_or<libcamera::Span<const libcamera::Rectangle> >(libcamera::Span<const libcamera::Rectangle>())’
1085 | properties.get(properties::PixelArrayActiveAreas).value_or(Span<const Rectangle>{});
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
The return value of `value_or()` is indeed a temporary, but binding it
to a reference extends its lifetime. Avoid the warning by not using a
reference; this does not make much difference since `value_or()` does
not return a reference.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ipa::RPi::IpaBase::monoSensor() function doesn't modify the class.
Make it const.
Fixes: 2031e2f29014 ("ipa: rpi: Add accessor function for monoSensor_")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
`YamlObject::contains()` does the same search, doing the lookup twice is
unnecessary.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This is more efficient since only a single vector will be constructed,
and furthermore, it prevents the TOCTOU issue that might arise when
the list of cameras changes between the two queries.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The monoSensor_ member variable will be used by the derived IPAs in an
upcoming commit, so add an accessor function for it.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for the following HDR modes in the Raspberry Pi IPA:
- Night mode
- Single exposure mode
- Multi-exposure (merged and unmerged)
The algorithm is updated to expect the HDR short channel to meter
explicitly for highlights. This means that it will not in general
under-expose the short channel more than is actually necessary.
When images don't have much saturation, it's good to detect this so
that some of the boost we want to apply to the dark areas can be
implemented as regular gain. This means we can then adjust the tone
curve less, leading to less flat looking images.
The impact on the HDR algorithm is then that this determines how we
build tonemaps dynamically. The highlights are more-or-less correct
now, so we have to build a power-type curve that gives us the
appropriately configured targets in the lower part of the histogram.
We allow the tuning file to supply the maximum spatial gain value,
rather than the whole curve (though it can supply this if it
wants). Some parameter defaults are tweaked to be generally better
across the range of our cameras.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add the missing 16-bit MEDIA_BUS_FMT_xxxx16_1X16 definitions to the
mediaBusFormatInfo table.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add the Raspberry Pi 5 PiSP specific compressed Bayer format types 1/2:
- V4L2_PIX_FMT_PISP_COMP1_xxx
- V4L2_PIX_FMT_PISP_COMP2_xxx
Add the Raspberry Pi 5 PiSP Frontend and Backend config formats:
- V4L2_META_FMT_RPI_FE_CFG
- V4L2_META_FMT_RPI_BE_CFG
Add the Raspberry Pi 5 PiSP Frontend statistics format:
- V4L2_META_FMT_RPI_FE_STATS
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for 16-bps (48-bpp) RGB output formats to libcamera. These
new formats are defined for the RGB and BGR ordering.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To match the enumerated media devices, each registered pipeline handler
is used in no specific order. It is a limitation when several pipelines
can match the devices, and user has to select a specific pipeline.
For this purpose, environment variable LIBCAMERA_PIPELINES_MATCH_LIST is
created to give the option to define an ordered list of pipelines to
match on.
LIBCAMERA_PIPELINES_MATCH_LIST="<name1>[,<name2>[,<name3>...]]]"
Example:
LIBCAMERA_PIPELINES_MATCH_LIST="rkisp1,simple"
Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a static helper to the PipelineHandlerFactoryBase class to
allow retrieving a pipeline by name.
Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The PipelineHandlerFactoryBase class has a name that is propagated to
the PipelineHandler instance it creates.
In present implementation, this name comes from the
REGISTER_PIPELINE_HANDLER registration macro. It corresponds to the
stringified name of the PipelineHandler derived class. Therefore,
PipelineHandler factories and instances names can be quite long such as
"PipelineHandlerRkISP1".
A libcamera user may have to explicitly refer to a PipelineHandler name
for configuration purpose: one usage of the name can be to define a
pipeline handlers match list and their priorities. It is desired, for
user convenience, to use a short name to designate a pipeline handler.
Reusing the short pipeline names already defined in the meson option
files is an existing and consistent way of naming pipelines.
This change adds an explicit name parameter to the
REGISTER_PIPELINE_HANDLER registration macro. That parameter is used to
define the name of a pipeline handler factory, instead of the current
pipeline handler class name.
Each pipeline registration is updated accordingly. The short name
assigned corresponds to the pipeline directory name in the source tree.
It is consistent with pipelines names used in meson.
Changing the pipeline name has an impact on the IPA modules: each module
defines a IPAModuleInfo structure. This structure has a pipelineName
member defining the pipeline handler name it shall match with.
Therefore, each internal IPA module definition has to be changed to have
its IPAModuleInfo pipelineName name updated with the short pipeline
handler name.
In addition to this pipelineName member, the IPAModuleInfo structure
also has a name member, associated to the IPA module name. Having
renamed the pipelines to a short name, the pipeline name and the IPA
module names of the IPAModuleInfo structure are the same: for in-tree
IPA, they correspond to the respective pipeline and IPA subdirectories
in the source tree. However the IPA name could be different, for
instance with a close source IPA implementation built out-of-tree. Thus,
it makes sense to keep the IPA name in that structure, as the 2
definitions may not always be redundant.
Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Adjust for clang-format style fix, reformat commitmsg]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The camera name is copied in gst_libcamera_src_open() as we can't hold
the lock protecting the name while calling GST_ELEMENT_ERROR(). The
GST_ELEMENT_ERROR() macro sends a message on the bus, taking more locks
and possibly causing issues.
However, the current code makes the copy, but does not actually use it.
So fix that.
Fixes: 58feb69f852289 ("gst: libcamerasrc: Implement selection and acquisition")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The string returned by `gst_video_colorimetry_to_string()`
has to be freed, this was missing.
Fixes: fc9783acc6083a ("gstreamer: Provide colorimetry <> ColorSpace mappings")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit 1dc01bc9e6c3 ("ipa: libipa: histogram: Add transform parameter to
constructor") added a new constructor for the Histogram class. The
implementation is inline in the header file, and the documentation was
added in the corresponding .cpp file, but it missed the \fn directive.
This causes Doxygen to complain:
src/ipa/libipa/histogram.h:31: warning: Member Histogram(Span< const uint32_t > data, Transform transform) (function) of class libcamera::ipa::Histogram is not documented.
src/ipa/libipa/histogram.cpp:59: warning: libcamera::ipa::Histogram::bins has @param documentation sections but no arguments
Fix it.
Fixes: 1dc01bc9e6c3 ("ipa: libipa: histogram: Add transform parameter to constructor")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment blocks in all
remaining locations that were not caught by the automated script as they
are out of sync with the file name.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment blocks in
template files and templates embedded in generator scripts.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
This histogram reported by the rkisp1 hardware is 20 bits, where the
upper 16 bits are meaningful integer data and the lower 4 bits are
fractional and meant to be discarded. Remove these 4 bits when
construction the histogram.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The maximum shutter speed calculation in the cam-helper relied on
the frame duration limits being correctly set in the cam-helper's mode
structure. This was not the case on first startup, so the maximum
shutter speed reported back via the ControlInfo was incorrect.
Fix this by setting up the camera mode in the cam-helper before querying
for the max shutter value.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Some V4L2 formats translate to the same pixel format, e.g. YU12 and
YM12 both produce YUV420. In this case our ISP driver advertises the
same size range for both, but we must not record the same thing twice
for the same pixel format (which will cause a failure later on).
Instead, ignore the V4l2 format if the pixel format has already been
seen.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a parameter to the histogram constructor that takes a transformation
function to apply to all the bins upon construction.
This is necessary notably for the rkisp1, as the values reported from
the hardware are 20 bits where the upper 16-bits are meaningful integer
values and the lower 4 bits are fractional and meant to be discarded. As
adding a right-shift parameter is probably too specialized, a generic
function is added as a parameter instead.
While at it, optimize the existing constructor to avoid push_back() into
a vector with a known final size.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment block.
The change was generated with the following script:
----------------------------------------
dirs="include/libcamera src test utils"
declare -rA patterns=(
['c']=' \* '
['cpp']=' \* '
['h']=' \* '
['py']='# '
['sh']='# '
)
for ext in ${!patterns[@]} ; do
files=$(for dir in $dirs ; do find $dir -name "*.${ext}" ; done)
pattern=${patterns[${ext}]}
for file in $files ; do
name=$(basename ${file})
sed -i "s/^\(${pattern}\)${name} - /\1/" "$file"
done
done
----------------------------------------
This misses several files that are out of sync with the comment block
header. Those will be addressed separately and manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Now that the rkisp1 Agc algorithm is a derivation of MeanLuminanceAgc
we can remove the bespoke functions from the IPA's class.
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that we have a AgcMeanLuminance class that centralises our AEGC
algorithm, derive the RkISP1's Agc class from it and plumb in the
necessary framework to enable it to be used. For simplicities sake
this commit switches the algorithm to use the derived class, but
does not remove the bespoke functions at this time.
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that the IPU3's Agc is derived from MeanLuminanceAgc we can
delete all the unecessary bespoke functions.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In preparation for switching to a derivation of AgcMeanLuminance, add
a function to parse and store the statistics for easy retrieval in an
overriding estimateLuminance() function.
Now that we have a MeanLuminanceAgc class that centralises our AEGC
algorithm, derive the IPU3's Agc class from it and plumb in the
necessary framework to enable it to be used. For simplicity's sake
this commit switches the algorithm to use the derived class, but
does not remove the bespoke functions at this time.
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Agc algorithms for the RkIsp1 and IPU3 IPAs do the same thing in
very large part; following the Rpi IPA's algorithm in spirit with a
few tunable values in that IPA being hardcoded in the libipa ones.
Add a new base class for AgcMeanLuminance which implements the same
algorithm and additionally parses yaml tuning files to inform an IPA
module's Agc algorithm about valid constraint and exposure modes and
their associated bounds.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a helper for managing exposure modes and splitting exposure times
into shutter and gain values.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
For convenience's sake allow the creation of empty Histograms so
they can be embedded within other Classes and filled out with
data at some later point in time.
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
