Age | Commit message (Collapse) | Author |
|
The VIVID pipeline handler retains state globally of it's controls.
Ensure that when we configure this specific pipeline we set initial
parameters on the device that suit our (specific) needs.
This introduces how controls can be set directly on a device, however
under normal circumstances controls should usually be set from libcamera
controls as part of a request. These are VIVID specific only.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When a request is given to a pipeline handler, it must parse the request
and identify what actions the pipeline handler should take to enact on hardware.
In the case of the VIVID pipeline handler, we identify the buffer from the only
supported stream, and queue it to the video capture device.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We can now add buffer management, and connect up our bufferReady signal
to a callback.
Note that we provide the ability to export buffers from our capture
device (data->video_) using the exportBuffers() functionality from the
V4L2VideoDevice which allows a FrameBufferAllocater to obtain buffers
from this device.
When buffers are obtained through the exportFrameBuffers API, they are
orphaned and left unassociated with the device, and must be reimported
at start() time anyway. This allows the same interface to be used
whether internal buffers, or external buffers are used for the stream.
When a buffer completes, we call the buffer completion handler on the
pipeline handler, and because we have only a single stream, we can also
immediately complete the request.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the configurations have been generated and validated, they can be
applied to a device.
Vivid supports only a single stream, so it directly obtains the first
StreamConfiguration from the CameraConfiguration.
The VIVID catpure device is a V4L2Video device, so we generate a
V4L2DeviceFormat to apply directly to the capture device node.
Note that we convert the libcamera Format stored in
cfg.pixelFormat to a V4L2PixelFormat using V4L2PixelFormat helper. This
currently defaults to the single-planar formats, and should be extended
to support the Multiplanar configuration from the V4L2Device.
[todo Repair the link between the multiplanar configuration of the
V4L2VideoDevice and the pixel format selection]
Following the call to set the format using the Kernel API, if the format
has been adjusted in any way by the kernel driver, then we have failed
to correctly handle the validation stages, and thus the configure
operation is idendified has having failed.
Finally stream specific data can be directly stored and set as
reflecting the state of the stream.
[NOTE: the cfg.setStream() call here associates the stream to the
StreamConfiguration however that should quite likely be done as part of
the validation process. TBD]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Implement the support for Generating and Validating the streams the
Camera can provide.
Vivid is a simple case with only a single stream.
Test the configurations can be generated and reported with cam -I:
"""
LIBCAMERA_LOG_LEVELS=Pipeline,VIVID:0 ./src/cam/cam -c 1 -I
[232:02:09.633067174] [2882911] INFO IPAManager ipa_manager.cpp:136 libcamera is not installed. Adding '/home//libcamera/build-vivid/src/ipa' to the IPA search path
[232:02:09.633332451] [2882911] WARN IPAManager ipa_manager.cpp:147 No IPA found in '/usr/local/lib/x86_64-linux-gnu/libcamera'
[232:02:09.633373414] [2882911] INFO Camera camera_manager.cpp:283 libcamera v0.0.11+714-d1ebd889-dirty
Using camera vivid
0: 1280x720-BGR888
* Pixelformat: NV21 (320x180)-(3840x2160)/(+0,+0)
- 320x180
- 640x360
- 640x480
- 1280x720
- 1920x1080
- 3840x2160
* Pixelformat: NV12 (320x180)-(3840x2160)/(+0,+0)
- 320x180
- 640x360
- 640x480
- 1280x720
- 1920x1080
- 3840x2160
* Pixelformat: BGRA8888 (320x180)-(3840x2160)/(+0,+0)
- 320x180
- 640x360
- 640x480
- 1280x720
- 1920x1080
- 3840x2160
* Pixelformat: RGBA8888 (320x180)-(3840x2160)/(+0,+0)
- 320x180
- 640x360
- 640x480
- 1280x720
- 1920x1080
- 3840x2160
"""
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Create a VividCameraData inheriting from the CameraData to handle camera
specific data, and use it to create and register the camera with the
CameraManager.
This can now be tested to see that the camera becomes available to
applications:
"""
LIBCAMERA_LOG_LEVELS=Pipeline,VIVID:0 ./src/cam/cam -l
[231:44:49.325333712] [2880028] INFO IPAManager ipa_manager.cpp:136 libcamera is not installed. Adding '/home/libcamera/build-vivid/src/ipa' to the IPA search path
[231:44:49.325428449] [2880028] WARN IPAManager ipa_manager.cpp:147 No IPA found in '/usr/local/lib/x86_64-linux-gnu/libcamera'
[231:44:49.325446253] [2880028] INFO Camera camera_manager.cpp:283 libcamera v0.0.11+713-d175334d-dirty
Available cameras:
1: vivid
"""
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Verify that we can match on our expected device(s).
Use a temporary debug print to check that the pipeline finds
our device:
"""
LIBCAMERA_LOG_LEVELS=Pipeline,VIVID:0 ./src/cam/cam -l
<snipped>
[230:51:10.670503423] [2872877] DEBUG VIVID vivid.cpp:81 Obtained Vivid Device
"""
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Explicitly disable the unused-parameter warning in this pipeline handler.
Parameters are left unused while they are introduced incrementally, so for
documentation purposes only we disable this warning so that we can compile
each commit independently without breaking the flow of the development
additions.
This is not recommended practice within libcamera, please listen to your
compiler warnings.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide all of the skeleton stubs to succesfully compile
and register a new Pipeline Handler for the Vivid test device.
Meson must be reconfigured to ensure that this pipeline handler is
included in the selected pipelines configuration, and after building, we
can test that the PipelineHandler is successfully registered by listing
the cameras on the system with LIBCAMERA_LOG_LEVELS enabled:
"""
LIBCAMERA_LOG_LEVELS=Pipeline:0 ./build-vivid/src/cam/cam -l
[230:30:03.624102821] [2867886] DEBUG Pipeline pipeline_handler.cpp:680 Registered pipeline handler "PipelineHandlerVivid"
Available cameras:
"""
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Previously we only did this when the system starts (on the first
switch_mode). Now we do it whenever the manual colour gains are
updated. To facilitate this, this R/B vs. colour temperature inverse
functions are stored persistently in the AwbConfig.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When a camera is terminated, do not unconditionally free buffers in the
RPiCameraData destructor. Otherwise, this causes harmless error log messages
to be displayed if no buffer have previously been allocated.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
releaseBuffers() unconditionally calls ioctl(REQBUFS, 0) to release device
buffer allocations through the close() and class destructor functions. If
another libcamera process is running concurrently with a different sensor, it
would cause the ioctl to fail in the kernel because the buffer queue is owned
owned by the other process. This in turn would cause libcamera to generate an
error log message.
Fix this by ensuring the releaseBuffers() only calls ioctl(REQBUFS, 0) if there
have been buffers previously allocated by the device. This is done by testing
the presense of the V4L2BufferCache in the object.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
I identified opportunities to make libcamera's log output easier to
understand while working to get it working on my Android device as a
HAL. These additional logging statements came out of that and will
hopefully prove useful to Android distribution maintainers with the same
goal as mine and to users who attempt to debug tools like Waydroid.
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Currently, libdl is always required. Sometimes, the C++ runtime includes
a dynamic loader, which is the case for Android. Additionally, Android
11 does not have libdl. This fix allows libcamera to build on Android.
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
pwl.cpp uses abs() instead of std::abs(), which causes unexpected
behavior in the Clang compiler used for Android. Replace with
C++-standard absolute value function std::abs(), which supports
double-precision absolute values in a standard way.
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Android 11's toolchain does not support std::filesystem, but
camera_hal_config.cpp currently uses it. Remove references to
std::filesystem in order to support Android <= 11.
This adds a very small difference in behaviour, as File::exist() will
return true for special files (pipes, character or block devices, ...)
while std::filesystem::is_regular_file() doesn't, but I consider this
to be a corner case that doesn't matter much.
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The raspberrypi IPA is missing thread-safety annotations, which breaks
the build.
Add required thread-safety annotations.
../src/ipa/raspberrypi/controller/metadata.h:108:31: error: mutex
'mutex_' is still held at the end of function [-Werror,-Wthread-safety-analysis]
void lock() { mutex_.lock(); }
^
../src/ipa/raspberrypi/controller/metadata.h:108:23: note: mutex
acquired here
void lock() { mutex_.lock(); }
^
../src/ipa/raspberrypi/controller/metadata.h:109:25: error: releasing
mutex 'mutex_' that was not held [-Werror,-Wthread-safety-analysis]
void unlock() { mutex_.unlock(); }
^
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Multiple source files in the src/apps/cam/ directory are used by cam,
qcam and lc-compliance. They are compiled separately for each
application. Move them to a new src/apps/common/ directory and compile
them in a static library to decrease the number of compilation
operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fill the frame metadata in the AGC and AWB algorithm's prepare()
function. This removes the need to fill metadata manually in the IPA
module's processStatsBuffer() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fill the frame metadata in the AGC and AWB algorithm's prepare()
function. Additional metadata for other algorithms will be addressed
later.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Extend the Algorithm::process() function with a metadata control list,
to be filled by individual algorithms with frame metadata. Update the
rkisp1 and ipu3 IPA modules accordingly, and drop the dead code in the
IPARkISP1::prepareMetadata() function while at it.
This only creates the infrastructure, filling metadata in individual
algorithms will be handled separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When libtiff-4 is not found, the private camera_ member of the FileSink
class is set but never used. This causes a compilation error with clang:
In file included from ../../src/apps/cam/file_sink.cpp:19:
../../src/apps/cam/file_sink.h:39:27: error: private field 'camera_' is not used [-Werror,-Wunused-private-field]
const libcamera::Camera *camera_;
Fix by making the camera_ member field conditional on HAVE_TIFF.
Fixes: 6404b163bcbb ("cam: file_sink: Add support for DNG output")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libtiff is a shared dependency between cam and qcam, move it to
src/apps/. The shared dependency will be used to condition compilation
of source files in an upcoming application static library.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libevent is a shared dependency between cam and lc-compliance, move it to
src/apps/. The shared dependency will be used to condition compilation
of source files in an upcoming application static library.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The cam and qcam test application share code, currently through a crude
hack that references the cam source files directly from the qcam
meson.build file. To prepare for the introduction of hosting that code
in a static library, move all applications to src/apps/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There's no need to conditionally add tiff_dep to the list of qcam
dependency, as a not found dependency() is ignored when listed in the
executable dependencies argument.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If libtiff isn't found, DNG capture support is disabled. Don't print the
part of the --file help text that mentions DNG in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The recent change to the naming scheme for the camera tuning files failed to
rename ov9281.json, causing the sensor to fail to load. Since this is a mono
sensor module, rename this file to ov9281_mono.json.
Fixes: 820607b195ff: ("pipeline: raspberrypi: Update naming convention for tuning files")
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Each declaration of a LogCategory will create a new LogCategory, and
will be stored in an unordered_set Logger::categories_. This means that
when a plugin .so is unloaded and loaded, as happens when destructing
and creating a CamereManager, we'll get duplicate categories.
The Logger::registerCategory docs say "Log categories must have unique
names. If a category with the same name already exists this function
performs no operation.". The code does not comply with this.
We solve the issue with two changes:
Change the unordered_set to a vector for simplicity, as there's no need
for an unordered_set.
Instead of using the LogCategory constructor to create new categories in
_LOG_CATEGORY() macro, use a factory method. The factory method will
return either an existing LogCategory if one exists with the given name,
or a newly created one.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
LogCategory just stores the char * that was given to it in the
constructor, i.e. it refers to memory "outside" LogCategory. If the
LogCategory is defined in a .so that is unloaded, then it leads to the
LogCategory pointing to freed memory, causing a crash.
Fix this by taking a copy of the name by using a std::string instead of
just storing the pointer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There's no need to print the exposure and gain control ranges as an Info
message. Downgrade it to Debug. While at it, print the ranges using the
"[min, max]" syntax.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
A few periods crept in at the end of Doxygen \brief or \param statements
in the src/ipa/ directory. Remove them all in one go.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add support for 8-bit raw formats in DNGWriter.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add support for outputting buffers in DNG format. It reuses the DNG
writer that we had previously in qcam.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
To prepare for adding DNG support to cam, move DNGWriter from qcam to
cam so that we only have inclusions from qcam to cam and not the other
way around.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
For the purpose of testing serializing/deserializing Flags in function
parameters, add an enum class TestFlags and Flags<TestFlags> to some
function parameters, both for input and output and Signals.
While at it, update the ipa_interface_test.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
For the purpose of testing serializing/deserializing enums in function
parameters, add IPAOperationCode to the parameter list of init().
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Update the imx219, imx477 and imx519 parsers to extract the line length
values from the embedded data stream and use these values in the
deviceStatus metadata, replacing the DelayedControls provided values.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Rename CamHelper::getVBlanking to CamHelper::getBlanking, and update the
calculations in that function to return both horizontal and vertical
blanking values for a given exposure time and frame duration limits. The
calculations are setup such that vertical blanking is extended to the
maximum allowable value, and any remainder gets put into horizontal
blanking.
The calculated horizontal blanking value is now returned to the pipeline
handler to pass into DelayedControls to program into the sensor.
Update the IPA to now specify the maximum frame duration from the
maximum horizontal + vertical blanking values provided by the sensor
mode. Additionally, the IPA now uses the frame specific horizontal
blanking value (as returned by DelayedControls) in all instances.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a lineLength field to the DeviceStatus structure to store the line
length used for a particular frame.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add CamHelper::hblankToLineLength() to calculate the line length
duration from the horizontal blanking (in pixels) value.
Add CamHelper::lineLengthToHblank() to calculate the horizontal blanking
(in pixels) value from the line length duration.
Add CamHelper::lineLengthPckToDuration() to calculate the line length
duration from the line length in pixels.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The pixel clock rate will be used in subsequent commits to calculate
line length durations.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Update CamHelper::getDelays() to return the sensor HBLANK delay. The
HBLANK delay is set to the same value as VBLANK delay for all sensors in
the Raspberry Pi IPA.
Return the HBLANK gain delay from the IPA to the pipeline handler, and
initialise DelayedControls to handle V4L2_CID_HBLANK with this delay
value.
As a drive-by, check that the V4L2_CID_HBLANK control is available when
calling IPARPi::configure().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Given that the single user of the CamHelper is the Raspberry Pi IPA, the
initialized_ field check is unnecessary. Remove the check and the field.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Update CamHelper::exposureLines() and CamHelper::exposure() to take a
line length duration parameter for use in the exposure calculations.
For now, only use the minimum line length for all the calculations to
match the existing IPA behavior.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add fields for minimum and maximum line length duration to the
CameraMode structure. This replaces the existing lineLength field.
Any use of the existing lineLength field is replaced by the new
minLineLength field, as logically we always want to use the fastest
sensor readout by default.
As a drive-by cosmetic change, split all fields in the CameraMode
structure into separate lines.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add fields for minimum and maximum line length (in units of pixels) to
the IPACameraSensorInfo structure. This replaces the existing lineLength
field.
Update the ipu3, raspberrypi and rkisp1 IPAs to use
IPACameraSensorInfo::minLineLength instead of
IPACameraSensorInfo::lineLength, as logically we will always want to use
the fastest sensor readout by default.
Since the IPAs now use minLineLength for their calculations, set the
starting value of the V4L2_CID_HBLANK control to its minimum in
CameraSensor::init().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Since libtiff version 20201219, the CFAPATTERN tag is using a variable
count and not the fixed 4 values size.
For reference, the commit introducing this is:
commit 2eb5a954cb7b7ad61559da00743c4b0e2fce34d0
Author: Sam Hasinoff <hasinoff@google.com>
Date: Sun Mar 8 21:23:16 2020 +0100
Make TIFFTAG_CFAPATTERN variable count
Add a version check in the DNGWriter::write function when this tag is
written as this breaks the raw capture in qcam.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
formatInfoMap
The warnings "Unknown subdev format 0x4001, defaulting to RGB encoding" and
"Unknown subdev format 0x1013, defaulting to RGB encoding" are thrown while using
simple pipeline handler with NXP ISI hardware.
The JPEG_1X8 and BGR888_1X24 media bus formats, supported by the ISI driver, are
missing in the V4L2SubdeviceFormatInfo structure storing the correspondence
between a media bus format and a colour encoding. So populate the structure with
the missing media bus formats.
Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The libcamera project is not yet ready to declare ABI nor API stability,
but it will benefit the community to be able to provide more regular
release cycles to determine 'versioned' points of history.
Ideally, these releases will be made at any ABI breakage, but can be
made at arbitary time based points along the way.
To support releases which may not be ABI stable, declare the soversion
of both the libcamera and libcamera-base library to be dependant upon
both the major minor and patch component of the project version.
As part of this, introduce a new 'Versions' summary section to highlight
the different version components that may become apparent within any
given build.
Bumping versions may leave dangling libcamera.so.* symlinks in build
directories. This will confuse Doxygen which will print during its
directory scanning phase a warning that the symlink can't be read. As we
don't need Doxygen to follow symlinks, disable it with EXCLUDE_SYMLINKS.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|