| Age | Commit message (Collapse) | Author |
|---|
|
The BufferMask enum provides a way of identifying which stream a frame buffer
belongs to. This enum is defined in the raspberrypi.mojom interface file.
However, the IPA does not need these enum definitions to mmap buffers that it
uses.
Move this enum out of the raspberrypi.mojom interface file and put it into
the RPi namespace visible only to the pipeline handler. This removes the
need to include the auto-generated IPA interface header in the RPi::Stream
definition.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
No existing Algorithm used the base pause(), resume() functions
or the paused_ flag, nor is there a need for a generic pause API.
Remove these. The AGC and AWB algorithms now have methods named
disableAuto(), enableAuto() which better describe their functionality.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Report the sensor timestamp in metadata. Use the timestamp from the
first buffer. Accuracy could be improved by using the frame start event
from the CSI-2 receiver, but the kernel driver doesn't support it yet.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add to the formats map all the supported ISI video capture
stream formats.
This allows to populate the list of stream formats for all the non-RAW
use cases, as the ISI can perform colorspace conversion between YUV and
RGB.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The libcamerasrc element looks for the availability of the
FrameDurationLimits control by looking it up by numeric control id.
The ControlinfoMap::find(unsigned int i) function searches the control
numerical identifier on the ContorlInfoMap::idMap_ class member, which
might be not initialized if the pipeline handler does not register
any control, causing an invalid memory access.
Avoid looking up the control by numerical id and use the ControlId
instance instead to prevent that.
Fixes: ccfe0a1af77c ("gstreamer: Provide framerate support for libcamerasrc")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The parameter 'request' is only used in an assert. assert is only defined
for debug builds and release builds will not use the parameter, resulting
in warnings messages only for non-debug builds.
Fix this by flagging the parameter as 'maybe_unused'.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a pipeline handler for the ISI capture interface found on
several versions of the i.MX8 SoC generation.
The pipeline handler supports capturing multiple streams from the same
camera in YUV, RGB or RAW formats. The number of streams is limited by
the number of ISI pipelines, and is currently hardcoded to 2 as the code
has been tested on the i.MX8MP only. Further development will make this
dynamic to support other SoCs.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Implement the PipelineHandlerRPi::releaseDevice method which allows
us to free any allocated buffers when a camera is released.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This notifies pipeline handlers when a camera is released, in case
they want to free any resources or memory buffers.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This reverts commit 30d704732badc675f72fe73d14749669cb645c23.
It turns out that this commit causes some regressions and is in fact
unnecessary because the related commit "libcamera: v4l2_videodevice:
Guard against releasing unallocated buffers"
(a2bdff6d0b67475492ac7cf9318866b6d89a28fd) fixes the problem
completely (if the buffers were never allocated, the video device
avoids trying to free them even if the pipeline handler asks).
The reason for the regressions is that in this new (broken) scheme we
would never call clearBuffers() on all the streams if the internal
buffers were never allocated (i.e. buffersAllocated_ is never
set). This causes the stream's bufferMap_ list to get longer and
longer if there are multiple back-to-back calls to configure, and
dev_->importBuffers() will ultimately to fail.
So either we need to think more carefully about how to stop the
pipeline handler from freeing buffers that it doesn't own, or we just
leave it as the other commit resolves the problem on its own. In the
interim, simply reverting this commit certainly seems like the best
solution.
Fixes: 30d704732bad ("pipeline: raspberrypi: Do not unconditionally free buffers on close")
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The V4L2VideoDevice ensures that all sequence numbers for applications
commence at zero from the libcamera perspective. This should be the
behaviour expected by kernel drivers, but this is not always the case.
This is handled internally to ensure consistency, and a warning is
printed if the device does not start from zero. It was expected that the
Warning would help highlight where kernel drivers should be fixed, but
this has led to several false positive reports of failures where people
have been concerned that this warning is a cause for unrelated issues.
Lower the log level print to 'Info', to reduce the apparent severity of
this warning. Info is likely more appropriate that Debug to continue to
facilitate awareness of kernel drivers that could be improved, while not
appearing to be a fault.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add rudimentary LSC tables for imx219. These were generated with the
rkisp1 tuning script from libtuning [1], using an imx8mp (debix) and a white
computer monitor, at only a single color temperature of 5800.
[1] https://lists.libcamera.org/pipermail/libcamera-devel/2022-October/035017.html
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add coefficients sets in the YAML tuning file to allow using different set
depending of the image color temperature (provided by AWB algorithm).
During processing, LSC algorithm computes coefficients by doing a linear
interpolation between the two closer set.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Control the framerate by passing the controls::FrameDurationLimits
during Camera::start(). Framerate in gstreamer is expressed as
GST_TYPE_FRACTION so we maximise on maintaining it as a fraction
throughout and only do arithematic computations as and when required
(to compute frame-duration and vice-versa).
To weed out abritrary framerate as input, place the clamping via the
controls::FrameDurationLimits provided after camera::configure() phase.
This is handled by a helper function
gst_libcamera_clamp_and_set_frameduration().
Set the bound checked framerate (done in the above mentioned helper)
into the caps and pass the ControlList containing the frame-duration
to Camera::start(ctrls).
Signed-off-by: Rishikesh Donadkar <rishikeshdonadkar@gmail.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Configure the camera before exposing the caps valid controls values
(and bounds) are available. These control values might be of interest
to be exposed on the capabilites, which otherwise, would not be
available if the camera is configured after the update caps event.
For instance, the FrameDurationLimits are computed by RPi's IPA in
its configure(). Hence, we need to Camera::configure() to happen in
order to know the FrameDurationLimits, that can be exposed in the caps.
This ties into the framerate support for libcamerasrc which will happen
in a follow-up commit.
Signed-off-by: Rishikesh Donadkar <rishikeshdonadkar@gmail.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This annotates member functions and variables of V4L2Camera by
clang thread safety annotations.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
This annotates member functions of V4L2CameraProxy by clang
thread safety annotations.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
This annotates member functions and variables of
CameraManager::Private by clang thread safety annotations.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
This annotates member variables of ThreadData by clang thread
safety annotations.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
This annotates member functions and variables of Semaphore by
clang thread safety annotations.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The tryCompleteRequest() function looks up the RkISP1FrameInfo that all
but one of its callers already look up. Remove the double look up by
passing the info pointer to tryCompleteRequest().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The PipelineHandler::generateConfiguration() function allocates a
CameraConfiguration instance and returns it. The ownership of the
instance is transferred to the caller. This is a perfect match for a
std::unique_ptr<>, which the Camera::generateConfiguration() function
already returns. Update PipelineHandler::generateConfiguration() to
match it. This fixes a memory leak in one of the error return paths in
the IPU3 pipeline handler.
While at it, update the Camera::generateConfiguration() function
documentation to drop the sentence that describes the ownership
transfer, as that is implied by usage of std::unique_ptr<>.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The limits for the shutter speed and analogue gain are stored in
IPASessionConfiguration::agc. While they're related to the AGC, they are
properties of the sensor, and are stored in the session configuration by
the IPA module, not the AGC algorithm. Move them to the
IPASessionConfiguration::sensor structure where they belong.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Reorder functions in the base ipa::Algorithm and its derived classes to
match the calling order: queueRequest(), prepare() and process(). This
makes the code flow easier to read. No functional change intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
All states count as "acquired" except for "CameraAvailable".
Fixes: dfc6d711c9f7 ("libcamera: Allow concurrent use of cameras from same pipeline handler")
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
LSC gradient parameters are currently computed during prepare() phase.
Because these parameters can be computed only one time and stay constant for
each frame after, move the computation to the configure() function.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Previously we only did this when the system starts (on the first
switch_mode). Now we do it whenever the manual colour gains are
updated. To facilitate this, this R/B vs. colour temperature inverse
functions are stored persistently in the AwbConfig.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When a camera is terminated, do not unconditionally free buffers in the
RPiCameraData destructor. Otherwise, this causes harmless error log messages
to be displayed if no buffer have previously been allocated.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
releaseBuffers() unconditionally calls ioctl(REQBUFS, 0) to release device
buffer allocations through the close() and class destructor functions. If
another libcamera process is running concurrently with a different sensor, it
would cause the ioctl to fail in the kernel because the buffer queue is owned
owned by the other process. This in turn would cause libcamera to generate an
error log message.
Fix this by ensuring the releaseBuffers() only calls ioctl(REQBUFS, 0) if there
have been buffers previously allocated by the device. This is done by testing
the presense of the V4L2BufferCache in the object.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
I identified opportunities to make libcamera's log output easier to
understand while working to get it working on my Android device as a
HAL. These additional logging statements came out of that and will
hopefully prove useful to Android distribution maintainers with the same
goal as mine and to users who attempt to debug tools like Waydroid.
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Currently, libdl is always required. Sometimes, the C++ runtime includes
a dynamic loader, which is the case for Android. Additionally, Android
11 does not have libdl. This fix allows libcamera to build on Android.
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
pwl.cpp uses abs() instead of std::abs(), which causes unexpected
behavior in the Clang compiler used for Android. Replace with
C++-standard absolute value function std::abs(), which supports
double-precision absolute values in a standard way.
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Android 11's toolchain does not support std::filesystem, but
camera_hal_config.cpp currently uses it. Remove references to
std::filesystem in order to support Android <= 11.
This adds a very small difference in behaviour, as File::exist() will
return true for special files (pipes, character or block devices, ...)
while std::filesystem::is_regular_file() doesn't, but I consider this
to be a corner case that doesn't matter much.
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The raspberrypi IPA is missing thread-safety annotations, which breaks
the build.
Add required thread-safety annotations.
../src/ipa/raspberrypi/controller/metadata.h:108:31: error: mutex
'mutex_' is still held at the end of function [-Werror,-Wthread-safety-analysis]
void lock() { mutex_.lock(); }
^
../src/ipa/raspberrypi/controller/metadata.h:108:23: note: mutex
acquired here
void lock() { mutex_.lock(); }
^
../src/ipa/raspberrypi/controller/metadata.h:109:25: error: releasing
mutex 'mutex_' that was not held [-Werror,-Wthread-safety-analysis]
void unlock() { mutex_.unlock(); }
^
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Multiple source files in the src/apps/cam/ directory are used by cam,
qcam and lc-compliance. They are compiled separately for each
application. Move them to a new src/apps/common/ directory and compile
them in a static library to decrease the number of compilation
operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fill the frame metadata in the AGC and AWB algorithm's prepare()
function. This removes the need to fill metadata manually in the IPA
module's processStatsBuffer() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fill the frame metadata in the AGC and AWB algorithm's prepare()
function. Additional metadata for other algorithms will be addressed
later.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Extend the Algorithm::process() function with a metadata control list,
to be filled by individual algorithms with frame metadata. Update the
rkisp1 and ipu3 IPA modules accordingly, and drop the dead code in the
IPARkISP1::prepareMetadata() function while at it.
This only creates the infrastructure, filling metadata in individual
algorithms will be handled separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When libtiff-4 is not found, the private camera_ member of the FileSink
class is set but never used. This causes a compilation error with clang:
In file included from ../../src/apps/cam/file_sink.cpp:19:
../../src/apps/cam/file_sink.h:39:27: error: private field 'camera_' is not used [-Werror,-Wunused-private-field]
const libcamera::Camera *camera_;
Fix by making the camera_ member field conditional on HAVE_TIFF.
Fixes: 6404b163bcbb ("cam: file_sink: Add support for DNG output")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libtiff is a shared dependency between cam and qcam, move it to
src/apps/. The shared dependency will be used to condition compilation
of source files in an upcoming application static library.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libevent is a shared dependency between cam and lc-compliance, move it to
src/apps/. The shared dependency will be used to condition compilation
of source files in an upcoming application static library.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The cam and qcam test application share code, currently through a crude
hack that references the cam source files directly from the qcam
meson.build file. To prepare for the introduction of hosting that code
in a static library, move all applications to src/apps/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There's no need to conditionally add tiff_dep to the list of qcam
dependency, as a not found dependency() is ignored when listed in the
executable dependencies argument.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If libtiff isn't found, DNG capture support is disabled. Don't print the
part of the --file help text that mentions DNG in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The recent change to the naming scheme for the camera tuning files failed to
rename ov9281.json, causing the sensor to fail to load. Since this is a mono
sensor module, rename this file to ov9281_mono.json.
Fixes: 820607b195ff: ("pipeline: raspberrypi: Update naming convention for tuning files")
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Each declaration of a LogCategory will create a new LogCategory, and
will be stored in an unordered_set Logger::categories_. This means that
when a plugin .so is unloaded and loaded, as happens when destructing
and creating a CamereManager, we'll get duplicate categories.
The Logger::registerCategory docs say "Log categories must have unique
names. If a category with the same name already exists this function
performs no operation.". The code does not comply with this.
We solve the issue with two changes:
Change the unordered_set to a vector for simplicity, as there's no need
for an unordered_set.
Instead of using the LogCategory constructor to create new categories in
_LOG_CATEGORY() macro, use a factory method. The factory method will
return either an existing LogCategory if one exists with the given name,
or a newly created one.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
LogCategory just stores the char * that was given to it in the
constructor, i.e. it refers to memory "outside" LogCategory. If the
LogCategory is defined in a .so that is unloaded, then it leads to the
LogCategory pointing to freed memory, causing a crash.
Fix this by taking a copy of the name by using a std::string instead of
just storing the pointer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There's no need to print the exposure and gain control ranges as an Info
message. Downgrade it to Debug. While at it, print the ranges using the
"[min, max]" syntax.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
A few periods crept in at the end of Doxygen \brief or \param statements
in the src/ipa/ directory. Remove them all in one go.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add support for 8-bit raw formats in DNGWriter.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
