| Age | Commit message (Collapse) | Author |
|---|
|
Declare a using directive for the map of Stream to FrameBuffer. Update
all users of Request::buffers() to use the new usage directive.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Hook up various QCam UI bits with hotplug support introduced
in previous commits. This looks good-enough as first steps
to see how the hotplugging functionality is turning out to be
from application point-of-view.
One can still think of few edge case nuances not yet covered
under this implementation especially around having only one
camera in the system and hotplugging/hot-unplugging it.
Hence, those are intentionally kept out of scope for now. It
might require some thinking on how to handle it on application
level having additional time on hand.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The DNG writer will use the metadata to populate DNG tags.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a toolbar button that captures RAW data to disk. The button is only
enabled if the camera is configured to provide a raw stream to the
application.
Only when the capture action is triggered will a request with a raw
buffer be queued to the camera.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Allow a second stream to be configured for raw capture. This change only
adds support for configuring and allocating buffers for the second
stream. Later changes are needed to queue the allocated buffers to the
camera when the user wishes to capture a raw frame.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the StreamKeyValueParser helper to parse stream configuration from
the command line. This extends qcam to accept role hints and pixel
format in addition to a size.
Currently only one viewfinder stream is supported, add a check to keep
this behavior. Going forward this restriction will be lifted to support
more then one stream.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This commit introduces no functional changes.
This is required so that the combo-box list can be managed
conveniently from various private functions in subsequent
commit.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The viewfinder is currently expected to render frames to the screen
synchronously in the display() function, or at least to copy data so
that the buffer can be queued in a new request when the function
returns. This prevents optimisations when the capture format is
identical to the display format.
Make the viewfinder take ownership of the buffer, and notify of its
release through a signal. The release is currently still synchronous,
this will be addressed in a subsequent patch.
Rename the ViewFinder::display() function to render() to better describe
its purpose, as it's meant to start the rendering and not display the
frame synchronously.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The lack of support for multiplanar buffers comes from the viewfinder.
Move the corresponding check from MainWindow.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The new MappedBuffer structure replaces the std::pair<> used in the
mapped buffers map, and allows passing data to the ViewFinder::display()
function in a more structured way.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The qcam application is our reference implementation of a libcamera GUI
application. Document the code of the MainWindow class to make it easier
to follow, and reorganize the member data in logical groups for clarity.
No code change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The main window toolbar contains a start button and a stop button. This
allows starting an already started camera (which is currently not
handled and results in an error) or stopping an already stopped camera.
Replace the two actions with a single start/stop toggle action,
preventing UI misuse and reducing confusion.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To avoid blocking the camera manager for a long amount of time, move
capture event processing to the main thread. Captured buffers are added
to a queue and an event is posted to the main window to signal
availability of a buffer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Requests are requeued synchronously from the completion handler. To
prepare for delayed requeuing, move the queuing to a separate function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Implement a save image button on the toolbar which will take a current
viewfinder image and present the user with a QFileDialog to allow them
to choose where to save the image.
Utilise the QImageWriter to perform the output task.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Provide Quit, Play, Stop icons.
Create a Qt resource to compile icons into the binary and present them
on the toolbar.
Update the Quit button with a 'cross', and implement Play/Stop buttons.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Implement a quit button, and a list of cameras.
Selecting a different camera from the Toolbar will stop the current
stream, and start streaming the chosen camera device if it can be
acquired.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Intialise a local copy of the CameraManager instance to ease
access to the CameraManager which is frequently utilised.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
With the buffer allocator in use it's possible to cache the dmabuf
memory mappings when starting the camera instead of mapping and
unmapping them each time.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Switch to the FrameBuffer interface where all buffers are treated as
external buffers and are allocated outside the camera. Applications
allocating buffers using libcamera are switched to use the
FrameBufferAllocator helper.
Follow-up changes to this one will finalize the transition to the new
FrameBuffer interface by removing code that is left unused after this
change.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
signal
The stream to buffer map in the requestCompleted signal is taken
directly from the request which is part of the same signal. Remove the
map as it can be fetched directly from the request.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If there is only one camera exposed by libcamera, there is little value
in asking the user to choose it.
Automatically select it, and remove the need to ask the user to select
'ok' from a Dialog box.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Pass the CameraManager instance from the main() function to the
MainWindow class instead of accessing it through
CameraManager::instance(). This prepares for the removal of the
CameraManager::instance() method.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a '-s|--size' option to qcam to allow selecting the stream
resolution using a command line option.
If the sizes are not supported by the camera, they get automatically
adjusted and the user notified via an output message.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Buffer instances reference memory, which is modelled internally by a
BufferMemory instance. Store a pointer to the BufferMemory in the Buffer
class, and populate it when the buffer is queued to the camera through a
request. This is useful for applications to access the buffer memory in
the buffer or request completion handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The Buffer class is a large beast the stores information about the
buffer memory, dynamic metadata related to the frame stored in the
buffer, and buffer reference data (in the index). In order to implement
buffer import we will need to extend this with dmabuf file descriptors,
making usage of the class even more complex.
Refactor the Buffer class by splitting the buffer memory information to
a BufferMemory class, and repurposing the Buffer class to reference a
buffer and to store dynamic metadata. The BufferMemory class becomes a
long term storage, valid and stable from the time buffer memory is
allocated to the time it is freed. The Buffer class, on the other hand,
becomes transient, is created on demand when an application requires a
buffer, is given to a request, and is deleted when the request
completes.
Buffer and BufferMemory don't need to be copied, so their copy
constructor and assignment operators are deleted.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Provide an average FPS in the QCam title bar to show the current rate of
frame processing.
The QCam compilation is updated to process the Qt MoC headers to support
signals and slots accordingly.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide the version string reported by the libcamera library on the qcam
test utility.
This helps confirm the exact version of the library that is being used
while testing.
The version string is stored in the MainWindow so that it can be reused
without reconstructing.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The 'last' buffer timestamp is stored as a static. Rename the variable
to a more descritive 'lastBufferTime' and move it to the class instance.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To prepare for specialising the CameraConfiguration class in pipeline
handlers, return a pointer to a camera configuration instead of a
reference from Camera::generateConfiguration(). The camera configuration
always needs to be allocated from the pipeline handler, and its
ownership is passed to the application.
For symmetry, change Camera::configure() to take a CameraConfiguration
pointer instead of a reference. This aligns with our coding practice of
passing parameters that are modified by the callee by pointer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Rename the configureStreams() and streamConfiguration() methods to
configure() and generateConfiguration() respectively in order to clarify
the API. Both methods deal with CameraConfiguration objects, and are
thus not limited to streams, even if a CameraConfiguration currently
contains streams only.
While at it, remove the qcam MainWindow::configureStreams() method that
is declared but never defined or used.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Implement the camera configuration thru out the library, tests, cam and
qcam tools.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
qcam is a sample camera GUI application based on Qt. It demonstrates
integration of the Qt event loop with libcamera.
The application lets the user select a camera through the GUI, and then
captures a single stream from the camera and displays it in a window.
Only streams in YUYV formats are supported for now.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
