summaryrefslogtreecommitdiff
path: root/src/py
AgeCommit message (Collapse)Author
2022-08-25libcamera: color_space: Rename Jpeg to SyccLaurent Pinchart
The JPEG color space is badly name, as the J#!/bin/sh # SPDX-License-Identifier: GPL-2.0-or-later # Copyright (C) 2020, Google Inc. # # Author: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # # gen-ipa-priv-key.sh - Generate an RSA private key to sign IPA modules key="$1" openssl genpkey -algorithm RSA -out "${key}" -pkeyopt rsa_keygen_bits:2048
generated by cgit v1.2.1 (git 2.18.0) at 2024-12-21 01:25:04 +0000
5 (1995) didn't specify color primaries or a transfer function, and that the later ITU-R BT.601-7 (2011) version specifies color primaries for the 625-line variant that do not match sRGB, the JPEG color space in libcamera is badly named. This is confirmed by ITU-T T.871: As this Recommendation | International Standard is based on the prior informally-circulated JFIF version 1.02 specification that was produced in 1992, which referenced Rec. ITU-R BT.601 (formerly CCIR 601), it references that specification for definition of the E'Y, E'Cb, and E'Cr signals that correspond to the YCBCR values specified herein. However, since the development of the prior JFIF version 1.02 specification, additional industry specifications have been developed, Rec. ITU-R BT.601 has been updated, and common industry practice has emerged which often follows the sYCC specification in IEC 61966-2-1/Amd.1. The difference between the use of the colour interpretation specification in this Recommendation | International Standard and that of the sYCC specification may be considered negligible in practice. Rename the color space to sYCC, as its definition matches the sYCC standard, and indicate that it is typically used to encode JPEG images. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> 2022-08-19py: Switch to non-blocking eventfdTomi Valkeinen Blocking wait can be easily implemented on top in Python, so rather than supporting only blocking reads, or supporting both non-blocking and blocking reads, let's support only non-blocking reads. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-08-19py: Use libcamera's Mutex classesTomi Valkeinen Use libcamera's Mutex and MutexLocker instead of the std versions to get thread safety annotations. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-08-19py: Set EFD_CLOEXEC on eventfd to avoid fd leakingTomi Valkeinen Set EFD_CLOEXEC on eventfd to avoid fd leaking. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-08-19py: Use UniqueFDTomi Valkeinen Use UniqueFD to automate the eventfd lifetime management. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-08-19py: Create PyCameraManagerTomi Valkeinen Wrap the CameraManager with a PyCameraManager class and move the related code inside the new class. This helps understanding the life times of the used-to-be global variables, gets rid of static handleRequestCompleted function, and allows us to simplify the binding code as the more complex pieces are inside the class. There should be no user visible functional changes. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-08-19py: meson: Use libcamera_private dependencyTomi Valkeinen We define -DLIBCAMERA_BASE_PRIVATE to get access to libcamera private headers, but the correct way to do this is to have a meson dependency to libcamera_private. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-08-18py: cam.py: Remove todo commentTomi Valkeinen The comment is no longer valid. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-08-18py: Move ControlValue helpers to py_helpers.cppTomi Valkeinen Clean up the py_main.cpp a bit by moving the ControlValue helpers to a separate file. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-08-18py: Add Python logging categoryTomi Valkeinen Add Python logging category, and use it in handleRequestCompleted(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-08-18py: cam.py: Fix multi camera capture without -CTomi Valkeinen -C flag is supposed to affect only the camera that was previously defined in the arguments. That's not the case, and, e.g.: cam.py -c2 -C -c3 causes camera 3 to start capturing, but it stops after the initial Requests have been completed. Fix the issue by filtering out camera contexts that do not have -C defined. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-06-08py: examples: Add simple-cam.pyTomi Valkeinen Add a Python version of simple-cam from: https://git.libcamera.org/libcamera/simple-cam.git Let's keep this in the libcamera repository until the Python API has stabilized a bit more, and then we could move this to the simple-cam repo. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-06-08py: examples: Add simple-continuous-capture.pyTomi Valkeinen Add a slightly more complex, and I think a more realistic, example, where the script reacts to events and re-queues the buffers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-06-08py: examples: Add simple-capture.pyTomi Valkeinen Add an example to showcase the more-or-less minimal capture case. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-06-04py: Merge read_event() and get_ready_requests()Tomi Valkeinen We always call CameraManager.read_event() and CameraManager.get_ready_requests(), so to simplify the use merge the read_event() into the get_ready_requests(). This has the side effect that get_ready_requests() will now block if there is no event ready. If we ever need to call get_ready_requests() in a polling manner we will need a new function which behaves differently. However, afaics the only sensible way to manage the event loop is to use select/poll on the eventfd and then call get_ready_requests() once, which is the use case what the current merged function supports. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-06-01py: cam: cam_qt: mmap the fbs only onceTomi Valkeinen Instead of doing an mmap and munmap every time a Request is complete, mmap all the buffers once at the start of the program. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-06-01py: MappedFrameBuffer: Add 'fb' propertyTomi Valkeinen Add 'fb' property to expose the underlying FrameBuffer. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-06-01py: MappedFrameBuffer: Support non-contextmanager useTomi Valkeinen Implement non-contextmanager use to MappedFrameBuffer so that we can either: with MappedFrameBuffer(fb) as mfb: ... or mfb = MappedFrameBuffer(fb) mfb.mmap() ... mfb.munmap() While at it, improve the error handling a bit. Note that the mmap() returns self. In other words, one can do this: mfb = MappedFrameBuffer(fb).mmap() ... mfb.munmap() Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-06-01py: Implement FrameBufferPlaneTomi Valkeinen Implement FrameBufferPlane class and adjust the methods and uses accordingly. Note that we don't expose the fd as a SharedFD, but as an int. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-06-01py: Add FrameMetadataPlaneTomi Valkeinen Add FrameMetadataPlane class and adjust the methods and uses accordingly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-06-01py: Add Request.__str__()Tomi Valkeinen Add Request.__str__() which maps directly to Request::toString(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-06-01py: cam: Drop PIL dependencyTomi Valkeinen We can use Qt directly to accomplish the same as we do with PIL. A minor downside is that loading MJPEG frame with Qt produces a "Corrupt JPEG data" warning. The resulting picture looks fine, though. So add a message handler to ignore that warning. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-06-01py: cam: Move conversion funcs to helpers.pyTomi Valkeinen Move conversion functions from cam_qt.py to helpers.py to clean up the code and so that they can be used from other cam renderers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-27py: Use ln --relative to create symlinksTomi Valkeinen We create symlinks from the Python bindings build dir to the source dir so that 1) the build dir can be used to use the bindings, and 2) to allow modifications of the source .py files to be used right away without rebuilding. The symlinks were recently fixed and changed to use absolute paths. However, absolute paths ruin one main use case I have: using the bindings from the build dir via nfs from an ARM device. So move back to relative paths, but accomplish this with the --relative parameter for ln, instead of guessing the right relative path as was done before the above-mentioned fix. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-27py: Generate bindings for propertiesTomi Valkeinen Generate bindings for properties in a very similar way as done for controls. We do need to distinguish between the two, and thus I added --properties flag to gen-py-controls.py. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-27py: Rename 'efd' to 'event_fd'Tomi Valkeinen Perhaps it's better to have a more descriptive name here. I also considered just renaming 'efd' to 'fd', but 'event_fd' won. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-27py: Re-structure the controls APITomi Valkeinen Add ControlInfo class and change the controls related methods to resemble the C++ API (e.g. no more string based control methods). We don't implement ControlList or ControlInfoMap but just expose the same data via standard Python dict. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-27py: Re-implement controls genenerationTomi Valkeinen The Python bindings controls generation was not very good. It only covered the enums and they were in the main namespace. This adds the controls somewhat similarly to the C++ side. We will have e.g.: libcamera.controls.Brightness libcamera.controls.AeMeteringModeEnum.CentreWeighted Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-27py: cam: Convert ctx and state to classesTomi Valkeinen Convert ctx and state dicts to classes. No functional changes. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-27py: cam: Drop WA_ShowWithoutActivatingTomi Valkeinen Drop WA_ShowWithoutActivating from the Qt renderers. I added the flag during development phase as I didn't want the window to take the focus, but it should be removed now. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-27py: MappedFrameBuffer: Add type hints & docsTomi Valkeinen Add a few type hints and (minimal) docs to MappedFrameBuffer. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-27py: Move MappedFrameBuffer to libcamera.utilsTomi Valkeinen Move MappedFrameBuffer to libcamera.utils, instead of extending FrameBuffer class with a new mmap() method. This keeps us more aligned to the C++ API. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-27py: Add CameraManager.read_event()Tomi Valkeinen Add CameraManager.read_event() so that the user does not need to call os.read(). We use eventfd, and we must always read 8 bytes. Hiding that inside read_event() makes sense. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-27py: Fix None value in ControlType enumTomi Valkeinen "None" is not a valid name for an enum value, so change it to "Null". Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-27py: Fix SceneFlicker enum valuesTomi Valkeinen Stripping 'SceneFlicker' prefix from the enum value names leads to '50Hz' and '60Hz', which are not valid names. So add another heuristics to keep the prefix for SceneFlicker. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-27py: cam: CleanupsTomi Valkeinen No functional changes. Drop unused variables, reduce typechecker warnings. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-27py: cam_qt: Use libcamera.formatsTomi Valkeinen Use the new libcamera.formats in cam_qt.py. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-27py: Generate pixel formats listTomi Valkeinen Generate a list of pixel formats under 'libcamera.formats'. The 'formats' is a "dummy" container class, the only purpose of which is to contain the read-only pixel format properties. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-18py: Clean up control enums generationTomi Valkeinen Try to be more consistent with the names, and include "control" in all the names. Also drop a useless "using namespace libcamera" and only include "control_ids.h". Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-18py: Rename pyxyz to py_xyzTomi Valkeinen Having the underscore makes the names more readable, especially when there are multiple words in the name. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-18py: Use geometry classesTomi Valkeinen Now that we have proper geometry classes in the Python bindings, change the existing bindings and the .py files accordingly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-18py: Add geometry classesTomi Valkeinen Add libcamera's geometry classes to the Python bindings. Note that this commit only adds the classes, but they are not used anywhere yet. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-18py: Implement PixelFormat classTomi Valkeinen Implement PixelFormat bindings properly with a PixelFormat class. Change the bindings to use the new class instead of a string. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-18py: cam_qt: Cosmetic cleanupsTomi Valkeinen Drop irrelevant or wrong comments, merge separate_components() into demosaic(), and add mfb_to_rgb(). No functional changes. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-18py: cam_kms: Fix multistream displayTomi Valkeinen Instead of doing an atomic commit for each stream, do a single commit for the two planes. This fixes the issue that only the first plane was actually shown. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-18py: cam_kms: Support multiplanar formatsTomi Valkeinen Support multiplanar formats in the kms renderer. Tested with RPi and NV12. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-18py: cam.py: Exit on exceptionTomi Valkeinen Catch exceptions in the event_handler, as they would get ignored otherwise. Print the exception and return False so that the main loop exits. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-18py: pymain: Fix indentTomi Valkeinen Fix two minor mis-indents. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-18py: Add comment about the symlinksTomi Valkeinen Add comment about the symlinks to clarify the purpose. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2022-05-18py: meson: Fix comment about stubsTomi Valkeinen At least pyright seems to be able to use the stubs from the libcamera-stubs directory, so no need to copy the generated files. Adjust the comment accordingly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-12-21 01:25:05 +0000