| Age | Commit message (Collapse) | Author |
|---|
|
Remove the adjustStream() and assignStream() methods, and perform stream
adjustment and assignment while iterating the StreamConfiguration
items.
The adjustStream() implementation had some arbitrary assumption, like
the main output having to be as large as the sensor resolution, and did
not take into account the different alignment requirements between the
main output and the viewfinder output.
The assignStream() implementation also assumes only full-size streams
can be produced by the main output, and having it as a separate function
prevents adjusting streams according to which output they are assigned.
Blend the two implementation in a single loop and perform the required
stream adjustment and assignment in one go.
As streams are now assigned at validate() time, remove the same
operation from the configure() function.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a const version of the CIO2Device::sensor() method, that retrieves
a const pointer to the sensor_ class member, to be called by users
which only own a const reference to a CIO2Device class instance.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The IPU3 pipeline handler supports 2 processed RGB/YUV streams
and one RAW stream. Validate that the requested stream combination is
supported in the pipeline handler validate() implementation and return
an error in case it's not.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Size struct constructor defaults the width and height to 0.
Remove the empty braced-list initialization as it is not required.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Report StreamFormats associated to each StreamConfiguration generated
by the IPU3 pipeline handler.
The StreamFormats are generated differently for RAW and processed
streams, with the former using the sensor enumerated resolutions and
the latter using a continuous range of sizes constructed by matching the
sensor capabilities with the platform constraints.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The validate function overwrites the generated StreamConfiguration with
the one reported by the CIO2 unit when inspecting the RAW stream
configuration.
As we prepare to add StreamFormats to the IPU3 StreamConfiguration,
assigning to the CIO2 generated configuration would delete the
StreamFormats.
Fix this by updating relevant fields only in order to keep the
assigned StreamFormats.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add two methods to the CIO2Device class to retrieve all the supported
PixelFormats and sizes.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Inspect the return status of validate() in the IPU3 pipeline handler
generateConfigurtion() implementation. If the generated configuration is
not valid, return a an empty configuration to the application.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Remove stream assignment from the IPU3 pipeline handler
generateConfiguration() implementation.
The function aims to provide a suitable default for the requested use
cases. Defer stream assignment to validation and only initialize sizes
and formats.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The mbusCodesToInfo map actually maps media bus codes to PixelFormat
instances. Rename the map according to its actual function and while at
it drop the 'static' keyword as the map is already defined in an
anonymous namespace.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now SimpleCameraData::setupFormats() can fail if the camera sensor
supports media bus code which some entities down the pipeline don't.
When this happens continue with the next media bus code instead of
aborting the enumeration of the possible pipeline configurations.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Change SimpleCameraData::setupFormats() to return -EINVAL if the sink
pad of the link doesn't support the format set on the source pad of this
link.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The SimpleCameraData::init() function needs to setup links along the
pipeline, but doesn't need to repeat that operation for each media bus
code it tries. Move the link setup before the loop.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Define a using statement for the format maps returned by
V4L2Device::formats() and use it in all call sites. There is no
functional change in this patch.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove use of vcsm allocations and replace with dma heap allocations.
The pipeline handler now passes the fd of the allocation over to the IPA
instead of the raw pointer.
Also use libcamera::FileDescriptor for fd lifetime management.
This commit must be built alongside the accompanying BCM2835 ISP kernel
driver changes at https://github.com/raspberrypi/linux/pull/3715.
Otherwise a mismatch will cause undefined behavior.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The IPA is meant to be started when starting the camera, and stopped
when stopping it. It was so far started early in order to handle the
IPAInterface::processEvent() call related to lens shading table
allocation before IPAInterface::configure() to pass the table to the
IPA. Now that the lens shading table is passed through configure(),
starting the IPA early isn't needed anymore.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The Raspberry Pi IPA uses the custom RPI_IPA_ACTION_SET_SENSOR_CONFIG
frame action to send the sensor staggered write configuration to the
pipeline handler when the IPA is configured. Replace this ad-hoc
mechanism by passing the corresponding data back from the IPA to the
pipeline handler through the configure() response. This allows
synchronous handling of the response on the pipeline handler side.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The IPAInterface::configure() function now accepts custom configuration
data. Use it to pass the lens shading table instead of using a custom
IPA event. This will allow starting the IPA when starting the camera,
instead of pre-starting it early in order to process the lens shading
table allocation event.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Instead of receiving sensor orientation configuration from the IPA,
retrieve it from the CameraSensor Rotation property, and configure the
HFLIP and VFLIP controls accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The PipelineHandlerRPi::configureIPA() function accesses plenty of
member data from the RPiCameraData class and no member from the
PipelineHandlerRPi class. Move it to RPiCameraData where it logically
belongs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The controls parameter of StaggeredCtrl::set(), passed by reference, is
not modified by the function. Make it const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The controls variable in PipelineHandlerRPi::start() is unused. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Add two new parameters, ipaConfig and result, to the
IPAInterface::configure() function to allow pipeline handlers to pass
custom data to their IPA, and receive data back. Wire this through the
code base. The C API interface will be addressed separately, likely
through automation of the C <-> C++ translation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
SizeRange is defined as a class while Size and Rectangle are defined as
struct. This is confusing for users in forward declarations. Simplify it
by turning both structures into classes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Rectangle, unlike Size, has no constructor, requiring the users to
explicitly initialize the instances. This is error-prone, add
constructors.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Size has a default constructor, there's no need to default-initialize
instances explicitly. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Prior to N4387 ([1]), the std::tuple::tuple(const Types&...) constructor
was unconditionally explicit. gcc 5 doesn't implement N4387, leading to
a compilation error in the simple pipeline handler. Use
std::make_tuple() to fix it.
[1] http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/n4387.html
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Use std::numerical_limits to initialise the best score instead of an
arbitrary value. This fixes a failure in v4l2-conformance when using
the Raspberry Pi pipeline handler and v4l2-compatibility libcamera
layer.
Reported-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Fill the stride and frameSize fields of the StreamConfiguration at
configuration validation time instead of at camera configuration time.
This allows applications to get the stride when trying a configuration
without modifying the active configuration of the camera.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Fill the stride and frameSize fields of the StreamConfiguration at
configuration validation time instead of at camera configuration time.
This allows applications to get the stride when trying a configuration
without modifying the active configuration of the camera.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Fill the stride and frameSize fields of the StreamConfiguration at
configuration validation time instead of at camera configuration time.
This allows applications to get the stride when trying a configuration
without modifying the active configuration of the camera.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Fill the stride and frameSize fields of the StreamConfiguration at
configuration validation time instead of at camera configuration time.
This allows applications to get the stride when trying a configuration
without modifying the active configuration of the camera.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fill the stride and frameSize fields of the StreamConfiguration at
configuration validation time instead of at camera configuration time.
This allows applications to get the stride when trying a configuration
without modifying the active configuration of the camera.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fill the stride and frameSize fields of the StreamConfiguration at
configuration validation time instead of at camera configuration time.
This allows applications to get the stride when trying a configuration
without modifying the active configuration of the camera.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Unsupported formats should not be added to the configuration when
generating the configuration. Filter them out.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Unsupported formats should not be added to the configuration when
generating the configuration. Filter them out.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Media devices should be acquired by pipeline handlers via
PipelineHandler::acquireMediaDevice so that the media devices can be
registered in the pipeline handler so that they can be automatically
added to the devnum map for the v4l2 compatibility layer to use. Make
the raspberrypi pipeline handler do this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Simplify code for looking up PixelFormatInfo using a V4L2 format by
using the new PixelFormatInfo lookup function based on V4L2 format.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use a helper instead of local code to retrieve all keys from a map.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the new Size::isNull() function through the code base to replace
manual checks. While the new code isn't equivalent, as isNull() checks
that both width and height are zero, it catches the same conditions in
practice.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Do not proxy the signal in the CI2Device when there is no need for it,
remove it.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
It's confusing to read the code and understand that a request is only
completed before being processed by the ImgU if it only contains a
single RAW buffer. Add a boolean variable with a explanatory name to
make this clearer, no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Sharing a pointer with the IPA is fragile as it will not work with all
IPC mechanisms. Document that it's a temporary workaround that should be
reworked.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fix a typo in the word "unknown".
Suggested-by: IOhannes m zmölnig <umlaeute@debian.org>
Signed-off-by: Andrej Shadura <andrewsh@debian.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Use the Size::isNull() helper instead of using local code.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When an unsupported stream roles is requested to
generateConfiguration(), the function shall fail instead of simply
ignoring the request.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The generateConfiguration() implementation does not check if the
requested list of roles can actually be satisfied. The camera API
documentation prescribes the function shall fail in that case, instead
of silently adjust the returned configuration.
Fix this by implementing the same logic as the validate() function
implements, as the pipeline handler supports one raw stream and up to
two output streams.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Fix wrong parameter indent in generateConfiguration() function
implementation.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The IPU3 pipeline handler that does not support receiving an empty list
of roles at generateConfiguration() time. This contradicts the camera
API which allows application to generate empty CameraConfiguration to
be later manually filled.
Fix this by returning an empty CameraConfiguration if the list of
requested roles is empty. While at it, align the style with the other
pipeline handlers.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Improve the error message emitted when multiple raw streams are
requested.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
