| Age | Commit message (Collapse) | Author |
|---|
|
The RaspberryPi IPA contains a private Matrix3x3 class inside the ccm
algorithm. Replace it with the Matrix class available in
libcamera/internal.
While at it, mark the matrices RGB2Y and Y2RGB as static const.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The upcoming patches will introduce a Matrix class into
libcamera/internal. That name clashes with the Matrix class from the
RaspberryPi ccm implementation. Rename the rpi version to Matrix3x3 to
prevent the name clash. Matrix3x3 will be replaced by the generic
implementation later.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The black level obtained from the tuning file in software ISP is
retrieved in init (because this is the standard algorithm method with
access to tuning data) and stored into context. But the context gets
reset in configure and the black level is lost and never applied.
Let's store the black level from the tuning file into an algorithm
instance variable and put it into the context only later in configure.
This is similar to what rkisp1 IPA does with the values obtained from
the tuning file.
Fixes: 41e3d61c745153779ed5a38634d7266bffd60d61 ("libcamera: software_isp: Clear IPA context on configure and stop")
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Tested-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now agc struct in IPAActiveState is not used any longer. If there
will be need to have this struct, this patch can be reverted.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
On my setup, since commit fb8ad13d ("libcamera: software_isp: Move exposure+gain
to an algorithm module"), at start camera output stays very dark for dozen
of seconds, and then later slowly gets to normal. This is because existing
sensor exposure+gain settings are not used at start. We save initial
values in frameContext but in the agc algorithm we use IPA context.
Fix the problem by using in frameContext sensor values, since we already
use those in blc algorithm and change exposure type to int32_t to
unnecessary castings.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Tested-by: Robert Mader <robert.mader@collabora.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide the GalaxyCore gc08a3 camera sensor properties and registration
with libipa for the gain code helpers.
Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org>
Co-developed-by: Xing Gu <xinggu@chromium.org>
Signed-off-by: Xing Gu <xinggu@chromium.org>
Co-developed-by: Yudhistira Erlandinata <yerlandinata@chromium.org>
Signed-off-by: Yudhistira Erlandinata <yerlandinata@chromium.org>
Co-developed-by: Harvey Yang <chenghaoyang@chromium.org>
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide the GalaxyCore gc05a2 camera sensor properties and registration
with libipa for the gain code helpers.
Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org>
Co-developed-by: Xing Gu <xinggu@chromium.org>
Signed-off-by: Xing Gu <xinggu@chromium.org>
Co-developed-by: Yudhistira Erlandinata <yerlandinata@chromium.org>
Signed-off-by: Yudhistira Erlandinata <yerlandinata@chromium.org>
Co-developed-by: Harvey Yang <chenghaoyang@chromium.org>
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The RGB to YCbCr conversion matrix mentioned in a comment, coming from
the hardware documentation, does not match any of the canonical matrices
specified by any standard. While researching where the values came from,
it became apparent they are likely Bt.601 limited range coefficients
rounded to 6 bits of decimal precision. Record this in comments.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
Replace the manual vector and matrix calculations with usage of the
Vector and Matrix classes. This simplifies the code and improves
readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
Replace the manual storage of gains in the IPA active state and frame
context with usage of the RGB class. This simplifies the code thanks to
usage of the arithmetic functions provided by the RGB class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
Replace the manual vector and matrix calculations with usage of the
Vector and Matrix classes. This simplifies the code and improves
readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
The rec601LuminanceFromRGB() and estimateCCT() functions take RGB
triplets as three variables. Replace them with instances of the RGB
class and adapt the users accordingly. Only variables passed directly to
these functions are converted to RGB instances, further conversion of
IPA modules to the RGB class will be performed separately.
While at it, fix a typo in the documentation of the estimateCCT()
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
Now that libipa has a generic RGB class, replaces the local
implementation from the IPU3 AWB algorithm.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
Add a function to calculate the sum of a vector. It will be useful for
algorithms.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
Add functions to calculate the element-wise minimum and maximum of two
vectors or of a vector and a scalar. This will be used in algorithm
implementations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
Extend the Vector class with compound assignment operators that match
the binary arithmetic operators.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
The Vector class defines multiple element-wise arithmetic operators
between vectors or between a vector and a scalar. A few variants are
missing. Add them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
Instead of hand-coding all arithmetic operators, implement them based on
a generic apply() function that takes an operator-specific binary
operators. This will simplify adding missing arithmetic operators.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
The Vector class defines a set of arithmetic operators between two
vectors or a vector and a scalar. All the operators perform element-wise
operations, except for the operator*() that computes the dot product.
This is inconsistent and confusing. Replace the operator with a dot()
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
The default constructor leaves the vector data uninitialized. Add a
constructor to fill the vector with copies of a scalar value, and fix
the documentation of the default constructor.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
The Vector class can be useful to represent RGB pixel values. Add r(),
g() and b() accessors, similar to x(), y() and z(), along with an RGB
type that aliases Vector<T, 3>.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
The x(), y() and z() functions of the Vector class are convenience
accessors for the first, second and third element of the vector
respectively, meant to improve readability of class users when a vector
represents coordinates in 1D, 2D or 3D space. Those accessors are
limited to immutable access to the vector elements, as they return a
copy. Extend the API with mutable accessors.
The immutable accessors are modified to return a reference to the vector
elements instead of a copy for consistency. As they are inline
functions, this should make no difference in terms of performance as the
compiler can perform the same optimizations in their case.
While at it, reorder functions to declare operators before other member
functions, to be consistent with the usual coding style.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
|
|
The terms "shutter" and "shutter speed" are used through libcamera to
mean "exposure time". This is confusing, both due to "speed" being used
as "time" while it should be the inverse (i.e. a maximum speed should
correspond to the minimum time), and due to "shutter speed" and
"exposure time" being used in different places with the same meaning.
To improve clarity of the code base and the documentation, use "exposure
time" consistently to replace "shutter speed".
This rename highlighted another vocabulary issue in libcamera. The
ExposureModeHelper::splitExposure() function used to document that it
splits "exposure time into shutter time and gain". It has been reworded
to "split exposure into exposure time and gain". That is not entirely
satisfactory, as "exposure" has a defined meaning in photography (see
https://en.wikipedia.org/wiki/Exposure_(photography)) that is not
expressed as a duration. This issue if left to be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Report the default sensor black level reported by the datasheet.
Note that IMX327 and IMX462 depend on the IMX290 CameraSensorHelper.
That's fine since those sensors report the same defaults for the
black level as the Sony IMX290.
Signed-off-by: Geoffrey Van Landeghem <geoffrey.vl@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Add a default tuning file for Sony IMX327 sensor. This tuning file
is a copy of the IMX290 and is added to make the IMX327 sensor
just work without hassle. Note the extra description field to
clarify this is just an interim tuning file untill someone
provides a proper one.
Signed-off-by: Geoffrey Van Landeghem <geoffrey.vl@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Add a default tuning file for Sony IMX462 sensor. This tuning file
is a copy of the IMX290 and is added to make the IMX462 sensor
just work without hassle. Note the extra description field to
clarify this is just an interim tuning file untill someone
provides a proper one.
Signed-off-by: Geoffrey Van Landeghem <geoffrey.vl@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The IMX327 sensor is largely compatible with the already supported
Sony IMX290 so we can reuse the same helpers for the analogue gain
conversion functions.
Signed-off-by: Geoffrey Van Landeghem <geoffrey.vl@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The sensor is largely compatible with the already supported
Sony IMX290 so we can reuse the same helpers for the analogue
gain conversion functions.
Signed-off-by: Geoffrey Van Landeghem <geoffrey.vl@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Some IPA modules, like the RkISP1 one, call FCQueue::get(0) at
IPA::start() time, before any frame context has been allocated with
FCQueue::alloc() called at queueRequest() time.
The FCQueue implementation aims to detect when a FrameContext is get()
before it is alloc()-ated, Warns about it, and initializes the
FrameContext before returning it.
In case of frame#0, a get() preceding an alloc() call is not detected
as the "frame == frameContext.frame" test returns success, as
FrameContexts are zeroed by default.
As a result, the first returned FrameContext is not initialized.
Explicitly test for frame#0 to make sure the FrameContext is initialized
if get(0) is called before alloc(0). To avoid re-initializing a frame
context, in case alloc() has been called correctly before get(),
introduce an "initialised" state variable that tracks the FrameContext
initialisation state.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
If grey world AWB is setup in the tuning file, the CT curve will either
be missing or invalid. Disable biasing the statistics for the search in
such cases.
Fixes: ea8fd63d936f ("ipa: rpi: awb: Add a bias to the AWB search")
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Use the centralised libipa helpers rather than open coding common
functions.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Use the centralised libipa helpers instead of open-coding common
functions.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the centralised libipa helpers instead of open coding common
functions.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We start to have some functions relating to colour that are
effectively identical crop up across the IPA modules. Add a file
allowing those to be centralised within libipa so that a single
implementation can be used in all of the IPAs.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
For debugging purposes it is helpful to access the internal data of the
histogram. Add an accessor for that.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a DebugMetadata helper to the context and add the corresponding
plumbing. This is all that is needed to support debug metadata in an
IPA.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Initialization using the initializer list is cumbersome and requires
modifications to the list whenever the context is modified. Fix that by
adding a proper constructor to the context.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The names used by the IPA interface and the names used for buffer
completions handlers in libcamera clash in the use of the term "buffer".
For example video device buffer completion handler is called
"bufferReady" and the IPA event to ask the IPA to compute parameters are
called "fillParamsBuffers". This makes it hard to recognize which
function handles video device completion signals and which ones handle
the IPA interface events.
Rationalize the naming scheme in the IPA interface function and events
and the signal handlers in the pipelines, according to the
following table. Remove the name "buffer" from the IPA interface events
and events handler and reserve it for the buffer completion handlers.
Rename the IPA interface events and function to use the 'params' and
'stats' names as well.
IPA Interface:
- fillParamsBuffer -> computeParams [FUNCTION]
- processStatsBuffer -> processStats [FUNCTION]
- paramFilled -> paramsComputed [EVENT]
Pipeline handler:
- bufferReady -> videoBufferReady [BUFFER HANDLER]
- paramReady -> paramBufferReady [BUFFER HANDLER]
- statReady -> statBufferReady [BUFFER HANDLER]
- paramFilled -> paramsComputed [IPA EVENT HANDLER]
Cosmetic change only, no functional changes intended.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a vendor control rpi::ScalerCrops that is analogous to the current
core::ScalerCrop, but can apply a different crop to each configured
stream.
This control takes a span of Rectangle structures - the order of
rectangles must match the order of streams configured by the application.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Previous iterations of the ExposureModeHelper class had a
setShutterGainLimits() function, which got renamed to setLimits(). The
documentation still uses the old name. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
OV7251 is a mono VGA global shutter sensor that has a mainline
driver and works with libcamera.
Add the supporting files for it. The tuning is copied from OV9281.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This patch allows obtaining a black level from a tuning file in addition
to the camera sensor helper. If both of them define a black level, the
one from the tuning file takes precedence.
The use cases are:
- A user wants to use a different black level, for whatever reason.
- There is a sensor without known gains but with a known black level.
Because a camera sensor helper cannot be defined without specifying
gains, the only way to specify the black level is using the tuning
file. Software ISP uses its fallback gain handling in such a case.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The black level in software ISP is unconditionally guessed from the
obtained frames. CameraSensorHelper optionally provides the black level
from camera specifications now. Let's use the value if available.
If the black level is not available from the given CameraSensorHelper
instance, it's still determined on the fly.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Robert Mader <robert.mader@collabora.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Like the hardware pipelines do. Not clearing frameContexts otherwise can
trigger asserts like "Frame context for ... has been overwritten by ..."
when switching between cameras using the swISP, e.g. on phones.
Clearing the configuration and active state will become more important
with upcoming changes such as getting the black level from the camera
helper.
Fixes: 04d171e6b299 ("libcamera: software_isp: Call Algorithm::queueRequest")
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Sometimes the ISP produces statistics only with a subset of statistic
types being valid. It doesn't happen normally, but was observed in the
wild. Check for the RKISP1_CIF_ISP_STAT_AWB bit to prevent using invalid
or outdated data. As it doesn't happen regularly add an error message to
get notified when it happens.
For simpler code structure, the ColourTemperature metadata entry gets
written unconditionally and overwritten later if needed.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Sometimes the ISP produces statistics only with a subset of statistic
types being valid. It doesn't happen normally, but was observed in the
wild. Check for the RKISP1_CIF_ISP_STAT_AUTOEXP bit to prevent using
invalid or outdated data. As it doesn't happen regularly add an error
message to get notified when it happens.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In the case of an AWB search failure, the current algorithm logic will
return a point on the CT curve closest to where the search finisned.
This can be quite undesirable. Instead, add some bias params to the AWB
algorithm which will direct the search to a set CT value in the case
where statistics become unreliable causing the search to fail.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
A default CT of 4500K is used in a couple of places. Add a constexpr
value for the default CT value and use it instead.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
A minor wording improvement suggested on refactoring review.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
As described in the coding style document, libcamera favours <cmath>
over <math.h>. Replace the last few occurrences of the latter with the
former in the Raspberry Pi IPA and adapt the code accordingly. In some
cases, the <math.h> include is simply dropped as it isn't needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
