| Age | Commit message (Collapse) | Author |
|---|
|
These will be useful for streaming. The requestComplete callback will
store the buffers on each pads so that the _run() can pick them up
and push them through the pads from a streaming thread.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This adds getters on pad/pool/allocator so that we can retrieve the
Stream or FrameBuffer.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Setup the allocation and the release of buffers in the
element. We have one pooling GstAllocator that wraps the
FrameBufferAllocator and tracks the lifetime of FrameBuffer
objects. Then, for each pad we have a GstBufferPool object
which is only used to avoid re-allocating the GstBuffer
structure every time we push a buffer.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This adds get/set helper to store a pool on the pad.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This is needed to track the lifetime of the FrameBufferAllocator in relation to
the GstBuffer/GstMemory objects travelling inside GStreamer.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that we have stream-start and caps, we can now push a segment event to
announce what time will our buffer correlate to. For live sources this is just
an open segment in time format.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This is not expected to work in every possible cases, but should be sufficient as
an initial implementation. What it does is that it turns the StreamFormats into
caps and queries downstream caps with that as a filter.
The result is the subset of caps that can be used. We then keep the first
structure in that result and fixate using the default values found in
StreamConfiguration as a default in case a range is available.
We then validate this configuration and turn the potentially modified
configuration into caps that we push downstream. Note that we trust the order
in StreamFormats as being sorted best first, but this is not currently in
libcamera. A todo has been added in the head of this file as a reminder to fix
that in the core.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This adds helpers to deal with the conversion from StreamConfiguration
to caps and vice-versa. This is needed to implement caps negotiation.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Prior to sending caps, we need to send a stream-start event. This requires
generating a stream and a group id. The stream id is random for live sources and
the group id is shared across all pads.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This will allow implementing generic algorithm even if we cannot
request pads yet.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Each pad can have a different roles. Users will have to request and configure
their pads role before moving to a higher state.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use a GstTask as our internal streaming thread. Unlike GstBaseSrc, we
will be running a streaming thread at the element level rather than
per pad. This is needed to combine buffer request for multiple pads.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This adds code to select and acquire a camera. With this, it is now
possible to run a pipeline like:
gst-launch-1.0 libcamerasrc ! fakesink
Though no buffer will be streamed yet. In this function, we implement the
change_state() virtual method to trigger actions on specific state transitions.
Note that we also return GST_STATE_CHANGE_NO_PREROLL in
GST_STATE_CHANGE_READY_TO_PAUSED and GST_STATE_CHANGE_PLAYING_TO_PAUSED
transitions as this is required for all live sources.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This will allow selecting libcamerasrc traces with the following
environment:
GST_DEBUG=libcamerasrc:7
Or all libcamera GStreamer element traces using
GST_DEBUG="libcamera*:7"
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This property will be used to select by name the camera to use.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This pad will always be present and will allow simple pipeline to be used to
stream from the camera.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This simply adds the boiler plate for pads on the source element. The
design is that we have one pad, called "src", that will always be
present, and then more pads can be requested prior in READY or less
state. Initially pads have one property "stream-role" that let you
decide which role this pad will have.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
While GLib has locker implementation already using g_autoptr(), recursive mutex
locker was only introduced in recent GLib. Implement a simple locker for GMutex
and GRectMutex in order to allow making locking simpler and safer.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This feature is used with GstDeviceMonitor in order to enumerate
and monitor devices to be used with the source element. The resulting
GstDevice implementation is also used by application to abstract the
configuration of the source element.
Implementation notes:
- libcamera does not support polling yet
- The device ID isn't unique in libcamera yet
- The "name" property does not yet exist in libcamerasrc yet
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This transforms the basic information found in StreamFormats to GstCaps.
This can be handy to reply to early caps query or inside a device
provider. Note that we ignored generated range as they are harmful to
caps negotiation. We also don't simplify the caps for readability
reasons, so some of the discrete value may be included in a range.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This implements the GStreamer plugin interface and adds libcamerasrc
element feature to it. This is just enough to allow plugin
introspection.
gst-inspect-1.0 build/src/gstreamer/libgstlibcamera.so
Plugin Details:
Name libcamera
Description libcamera capture plugin
Filename build/src/gstreamer/libgstlibcamera.so
Version 0.0.0+1042-6c9f16d3-dirty
License LGPL
Source module libcamera
Binary package libcamera
Origin URL https://libcamera.org
libcamerasrc: libcamera Source
1 features:
GST_PLUGIN_PATH=$(pwd)/build/src/gstreamer gst-inspect-1.0 libcamerasrc
Factory Details:
Rank primary (256)
Long-name libcamera Source
Klass Source/Video
Description Linux Camera source using libcamera
Author Nicolas Dufresne <nicolas.dufresne@collabora.com
Plugin Details:
Name libcamera
Description libcamera capture plugin
Filename /home/nicolas/Sources/libcamera/build/src/gstreamer/libgstlibcamera.so
Version 0.0.0+1042-6c9f16d3-dirty
License LGPL
Source module libcamera
Binary package libcamera
Origin URL https://libcamera.org
GObject
+----GInitiallyUnowned
+----GstObject
+----GstElement
+----GstLibcameraSrc
Pad Templates:
none
Element has no clocking capabilities.
Element has no URI handling capabilities.
Pads:
none
Element Properties:
name : The name of the object
flags: accès en lecture, accès en écriture, 0x2000
String. Default: "libcamerasrc0"
parent : The parent of the object
flags: accès en lecture, accès en écriture, 0x2000
Object of type "GstObject"
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Silence -Wunused-function warning for older GLib versions]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
