summaryrefslogtreecommitdiff
path: root/src/android/camera_stream.cpp
AgeCommit message (Collapse)Author
2021-12-11android: Remove CameraWorkerJacopo Mondi
The CameraWorker class purpose was to handle acquire fences for incoming capture requests directed to libcamera. Now that fences are handled by the core library, it is not required to handle them in the HAL and the CameraWorker and CaptureRequest classes can be dropped. Update the core in CameraDevice class accordingly to queue Requests directly to the libcamera::Camera and set the release_fence to the value of the FrameBuffer::fence() for streams of type ::Direct. While at it make CameraRequest::StreamBuffer::fence a UniqueFD to ease the management of the fences file descriptor values. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-12-06<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24" fill="none" stroke="currentColor" stroke-width="2" stroke-linecap="round" stroke-linejoin="round" class="feather feather-more-horizontal"><circle cx="12" cy="12" r="1"></circle><circle cx="19" cy="12" r="1"></circle><circle cx="5" cy="12" r="1"></circle></svg>
thread safety consistency for buffers access. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2021-12-01android: Consolidate mutex classes to Mutex and MutexLockerHirokazu Honda std::mutex and std::unique_lock are used in android directories, mixing Mutex and MutexLocker. This consolidates them to Mutex and MutexLocker. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2021-10-26android: post_processor: Make post processing asyncUmang Jain Introduce a dedicated worker class derived from libcamera::Thread. The worker class maintains a queue for post-processing requests and waits for a post-processing request to become available. It will process them as per FIFO before de-queuing it from the queue. The entire post-processing handling iteration is locked under streamsProcessMutex_ which helps us to queue all the post-processing request at once, before any of the post-processing completion slot (streamProcessingComplete()) is allowed to run for post-processing requests completing in parallel. This helps us to manage both synchronous and asynchronous errors encountered during the entire post processing operation. Since a post-processing operation can even complete after CameraDevice::requestComplete() has returned, we need to check and complete the descriptor from streamProcessingComplete() running in the PostProcessorWorker's thread. This patch also implements a flush() for the PostProcessorWorker class which is responsible to purge post-processing requests queued up while a camera is stopping/flushing. It is hooked with CameraStream::flush(), which isn't used currently but will be used when we handle flush/stop scenarios in greater detail subsequently (in a different patchset). The libcamera request completion handler CameraDevice::requestComplete() assumes that the request that has just completed is at the front of the queue. Now that the post-processor runs asynchronously, this isn't true anymore, a request being post-processed will stay in the queue and a new libcamera request may complete. Remove that assumption, and use the request cookie to obtain the Camera3RequestDescriptor. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2021-10-26android: post_processor: Drop return value for process()Umang Jain PostProcessor::process() is invoked by CameraStream class in case any post-processing is required for the camera stream. The failure or success is checked via the value returned by CameraStream::process(). Now that the post-processor notifies about the post-processing completion operation, we can drop the return value of PostProcessor::process(). The status of post-processing is passed to CameraDevice::streamProcessingComplete() by the PostProcessor::processComplete signal's slot. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> 2021-10-26android: Track and notify post processing of streamsUmang Jain Notify that the post processing for a request has been completed, via a signal. The signal is emitted with a context pointer along with status of the buffer. The function CameraDevice::streamProcessingComplete() will finally set the status on the request descriptor and complete the descriptor if all the streams requiring post processing are completed. If buffer status obtained is in error state, notify the status to the framework and set the overall error status on the descriptor via setBufferStatus(). We need to track the number of streams requiring post-processing per Camera3RequestDescriptor (i.e. per capture request). Introduce a std::map to track the post-processing of streams. The nodes are dropped from the map when a particular stream post processing is completed (or on error paths). A std::map is selected for tracking post-processing requests, since we will move post-processing to be asynchronous in subsequent commits. A vector or queue will not be suitable as the sequential order of post-processing completion of various requests won't be guaranteed then. A streamsProcessMutex_ has been introduced here as well, which will be applicable to guard access to descriptor's pendingStreamsToProcess_ when post-processing is moved to be asynchronous in subsequent commits. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> 2021-10-26android: post_processor: Consolidate contextual informationUmang Jain Save and provide the context for post-processor of a camera stream via Camera3RequestDescriptor::StreamBuffer. We extend the structure to include source and destination buffers for the post processor, along with CameraStream::Type::Internal buffer pointer (if any). In addition to that, a back pointer to Camera3RequestDescriptor is convenient to get access to overall descriptor (status, metadata settings etc.). Also, migrate CameraStream::process() and PostProcessor::process() signature to use Camera3RequestDescriptor::StreamBuffer only. This will be helpful when we move to async post-processing in subsequent commits. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> 2021-10-26android: camera_stream: Replace post-processor nullptr checkUmang Jain Instead of checking postProcessor for nullptr, replace this check with an assertion that checks if the camera stream's type is not Type::Direct. Since it makes no sense to call CameraStream::process() on a Type::Direct camera stream. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> 2021-10-19android: camera_stream: Define explicit move constructor and destructorsLaurent Pinchart There's no need for the move constructor and the destructor to be inline. Define them explicitly, with default implementations. This allows usage of the CameraStream class without a complete definition of the PostProcessor class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> 2021-10-19android: camera_stream: Don't close fence if wait failsLaurent Pinchart The camera HAL APIs requires that any acquire fence that hasn't been waited on to be sent back to the framework as a release fence. The CameraDevice already copies the acquire fence to the release fence when signaling request completion, but the CameraStream incorrectly closes the fence when a wait fails and sets it to -1. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> 2021-10-19android: camera_request: Don't embed full camera3_stream_buffer_tLaurent Pinchart The camera3_stream_buffer_t structure is meant to communicate between the camera service and the HAL. They are short-live structures that don't outlive the .process_capture_request() operation (when queuing requests) or the .process_capture_result() callback. We currently store copies of the camera3_stream_buffer_t passed to .process_capture_request() in Camera3RequestDescriptor::StreamBuffer to store the structure members that the HAL need, and reuse them when calling the .process_capture_result() callback. This is conceptually not right, as the camera3_stream_buffer_t pass to the callback are not the same objects as the ones received in .process_capture_request(). Store individual fields of the camera3_stream_buffer_t in StreamBuffer instead of copying the whole structure. This gives the HAL full control of how data is stored, and properly decouples request queueing from result reporting. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> 2021-10-19android: camera_stream: Pass StreamBuffer to process()Laurent Pinchart Now that we have a proper structure to model a stream buffer, pass it to CameraStream::process() instead of the camera3_stream_buffer_t. This will allow accessing other members of StreamBuffer in subsequent commits. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> 2021-10-19android: camera_stream: Plumb process() with Camera3RequestDescriptorUmang Jain Data (or broader context) required for post processing of a camera request is saved via Camera3RequestDescriptor. Instead of passing individual arguments to CameraStream::process(), pass the Camera3RequestDescriptor pointer to it. All the arguments necessary to run the post-processor can be accessed from the descriptor. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> 2021-10-10android: camera_stream: Fix error message for buffer creationLaurent Pinchart Creating a CameraBuffer instance doesn't map memory. Fix the error message accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> 2021-10-06android: camera_stream: Set right format for processor output bufferHirokazu Honda CameraStream always sets the format of processor output buffer to MJPEG. This fixes the issue. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> 2021-09-29android: Wait on fences in CameraStream::process()Jacopo Mondi Acquire fences for streams of type Mapped generated by post-processing are not correctly handled and are currently ignored by the camera HAL. Fix this by adding CameraStream::waitFence(), executed before starting the post-processing in CameraStream::process(). The change applies to all streams generated by post-processing (Mapped and Internal) but currently acquire fences of Internal streams are handled by the camera worker. Postpone that to post-processing time by passing -1 to the Worker for Internal streams. Also correct the release_fence handling for failed captures, as the framework requires the release fences to be set to the acquire fence value if the acquire fence has not been waited on. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Tested-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2021-09-22android: camera_stream: Support PostProcessorYuv in CameraStreamHirokazu Honda CameraStream creates PostProcessorYuv if the destination format is NV12. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2021-09-22android: camera_stream: Create post processor in configure()Hirokazu Honda CameraStream creates PostProcessor and FrameBufferAllocator in the constructor. CameraStream assumes that a used post processor is JPEG post processor. Since we need to support various post processors, we would rather move the creation to configure() so as to return an error code if no proper post processor is found. This also moves FrameBufferAllocator and Mutex creation for consistency. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2021-09-06android: Cleanup libcamera namespace usageUmang Jain Usually .cpp files are equipped with using namespace libcamera; Hence, it is unnecessary mentioning the explicit namespace of libcamera at certain places. While at it, a small typo in a comment was noticed and fixed as part of this patch. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> 2021-08-27android: generic_camera_buffer: Correct buffer mappingHirokazu Honda buffer_handle_t doesn't provide sufficient info to map a buffer properly. cros::CameraBufferManager enables handling the buffer on ChromeOS, but no way is provided for other platforms. Therefore, we put the assumption that planes are in the same buffer and they are consecutive. This modifies the way of mapping in generic_camera_buffer with the assumption. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2021-08-10libcamera: Give MappedFrameBuffer its own implementationKieran Bingham The MappedFrameBuffer is a convenience feature which sits on top of the FrameBuffer and facilitates mapping it to CPU accessible memory with mmap. This implementation is internal and currently sits in the same internal files as the internal FrameBuffer, thus exposing those internals to users of the MappedFramebuffer implementation. Move the MappedFrameBuffer and MappedBuffer implementation to its own implementation files, and fix the sources throughout to use that accordingly. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> 2021-06-28android: camera_device: Fix null pointer dereferenceLaurent Pinchart Commit 7532caa2c77b ("android: camera_device: Reset config_ if Camera::configure() fails") reworked the configuration sequence to ensure that the CameraConfiguration pointers gets reset when configuration fails. This inadvertently causes a null pointer dereference, as the CameraStream constructor accesses the camera configuration through CameraDevice::cameraConfiguration() before the internal config_ pointer is set. Fix this by passing the configuration pointer explicitly to the CameraStream constructor. Fixes: 7532caa2c77b ("android: camera_device: Reset config_ if Camera::configure() fails") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Tested-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> 2021-03-03android: Move buffer mapping to CameraStreamJacopo Mondi The destination buffer for the post-processing component is currently first mapped in the CameraDevice class and then passed to CameraStream which simply calls the post-processor interface. Move the mapping to CameraStream::process() to tie the buffer mapping to the lifetime of the CameraBuffer instance. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> 2021-02-02android: post_processor: Change the type destination in process()Hirokazu Honda The type of the destination buffer in PostProcessor::process() is libcamera::Span. libcamera::Span is used for one dimension buffer (e.g. blob buffer). The destination can be multiple dimensions buffer (e.g. yuv frame). Therefore, this changes the type of the destination buffer to MappedFrameBuffer. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> 2021-01-27android: Set result metadata and EXIF fields based on request metadataPaul Elder Set the following android result metadata: - ANDROID_LENS_FOCAL_LENGTH - ANDROID_LENS_APERTURE - ANDROID_JPEG_GPS_TIMESTAMP - ANDROID_JPEG_GPS_COORDINATES - ANDROID_JPEG_GPS_PROCESSING_METHOD And the following EXIF fields: - GPSDatestamp - GPSTimestamp - GPSLocation - GPSLatitudeRef - GPSLatitude - GPSLongitudeRef - GPSLongitude - GPSAltitudeRef - GPSAltitude - GPSProcessingMethod - FocalLength - ExposureTime - FNumber - ISO - Flash - WhiteBalance - SubsecTime - SubsecTimeOriginal - SubsecTimeDigitized Based on android request metadata. This allows the following CTS tests to pass: - android.hardware.camera2.cts.StillCaptureTest#testFocalLengths - android.hardware.camera2.cts.StillCaptureTest#testJpegExif Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> 2020-10-21android: camera_stream: Make some member variables constantHirokazu Honda CameraStream initializes several member variables in the initializer list. Some of them are unchanged after. This makes them constant. Especially, doing to |cameraDevice_| represents CameraStream doesn't have the ownership of it. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> 2020-10-21android: Modify PostProcessor interfaceHirokazu Honda In PostProcessor::process(), the |source| argument doesn't have to be a pointer. This replaces its type, const pointer, with const reference as the latter is preferred to the former. libcamera::Span is cheap to construct/copy/move. We should deal with the type as pass-by-value parameter. Therefore this also drops the const reference in the |destination| argument. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> 2020-10-20android: Omit extra semicolonsHirokazu Honda The end semicolons with LOG_DECLARE_CATEGORY and LOG_DEFINE_CATEGORY are unnecessary. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2020-10-16android: jpeg: Port to PostProcessor interfaceUmang Jain Port the CameraStream's JPEG-encoding bits to PostProcessorJpeg. This encapsulates the encoder and EXIF generation code into the PostProcessorJpeg layer and removes these specifics related to JPEG, from the CameraStream itself. Signed-off-by: Umang Jain <email@uajain.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Change-Id: Id9e6e9b2bec83493a90e5e126298a2bb2ed2232a 2020-10-14android: camera_stream: Add documentationJacopo Mondi Add a brief documentation block to the CameraStream class. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> 2020-10-07android: camera_stream: Create buffer poolJacopo Mondi Add a FrameBufferAllocator class member to the CameraStream class. The allocator is constructed for CameraStream instances that needs internal allocation and automatically deleted. Allocate FrameBuffers using the allocator_ class member in the CameraStream class at CameraStream::configure() time and add two methods to the CameraStream class to get and put FrameBuffer pointers from the pool of allocated buffers. As buffer allocation can take place only after the Camera has been configured, move the CameraStream configuration loop in the CameraDevice class after camera_->configure() call. The newly created pool will be used to provide buffers to CameraStream that need to provide memory to libcamera where to deliver frames. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> 2020-10-07android: camera_device: Make CameraStream configuration nicerJacopo Mondi Loop over the CameraStream instances and use their interface to perform CameraStream configuration. Modify CameraStream::configure() to configure the android stream buffer count and to retrieve the StreamConfiguration by index instead of receiving it as a parameter. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> 2020-10-07android: camera_stream: Fetch format and size from configurationJacopo Mondi Fetch the format and size of the libcamera::StreamConfiguration associated with a CameraStream by accessing the configuration by index. This removes the need to store the libcamera stream format and sizes as class members and avoid duplicating information that might get out of sync. It also allows to remove the StreamConfiguration from the constructor parameters list, as it can be identified by its index. While at it, re-order the constructor parameters order. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> 2020-10-07android: camera_stream: Retrieve Stream and ConfigurationJacopo Mondi It's a common pattern to access the libcamera::Stream and libcamera::StreamConfiguration using the CameraStream instance's index. Add two methods to the CameraStream to shorten access to the two fields. This allows removing the index() method from the class interface. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> 2020-10-07android: camera_device: Move processing to CameraStreamJacopo Mondi Move the JPEG processing procedure to the individual CameraStream by augmenting the class with a CameraStream::process() method. This allows removing the CameraStream::encoder() method. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> 2020-10-07android: camera_stream: Construct with Android streamJacopo Mondi Pass the android camera3_stream_t, and a libcamera::StreamConfiguration to identify the source and destination parameters of this stream. Pass a CameraDevice pointer to the CameraStream constructor to allow retrieval of the StreamConfiguration associated with the CameraStream. Also change the format on which the CameraDevice performs checks to decide if post-processing is required, as the libcamera facing format is not meaningful anymore, but the Android requested format should be used instead. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> 2020-10-07android: camera_stream: Delegate Encoder constructionJacopo Mondi Delegate the construction of the encoder to the CameraStream class for streams that need post-processing. Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> 2020-10-07android: camera_stream: Add CameraStream::TypeJacopo Mondi Define the CameraStream::Type enumeration and assign it to each CameraStream instance at construction time. The CameraStream type will be used to decide if memory needs to be allocated on its behalf or if the stream is backed by memory externally allocated by the Android framework. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> 2020-10-07android: camera_stream: Break out CameraStreamJacopo Mondi Break CameraStream out of the CameraDevice class. No functional changes, only the code is moved. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>