| Age | Commit message (Collapse) | Author |
|---|
|
Currently, enums that are passed between pipeline handlers and their IPA
must be defined in a mojom file. However, there is a use case for
enum/flags to be defined in a C++ header, such that the enum can be used
in a component other than the pipeline handler and its IPA.
To support this, add support for the skipHeader attribute for enums.
Like structs, it is only allowed in core.mojom.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
For the purpose of testing serializing/deserializing Flags in function
parameters, add an enum class TestFlags and Flags<TestFlags> to some
function parameters, both for input and output and Signals.
While at it, update the ipa_interface_test.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
For the purpose of testing serializing/deserializing enums in function
parameters, add IPAOperationCode to the parameter list of init().
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add Flags<E> as a supported type in the IPA interface.
It is used in mojom with the [flags] attribute. Any field or parameter
type E that is prefixed with the [flags] attribute will direct the code
generator to generate the type name "Flags<E>" and appropriate
serialization/deserialization code for Flags<E> instead of for E.
It is usable and has been tested in struct members, function input and
output parameters, and Signal parameters. This does not add support for
returning Flags as direct return values.
Additionally, the [scopedEnum] attribute can be used on enum
definitions, which will instruct the code generator to convert it to an
enum class instead of a raw enum.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Update CamHelper::getDelays() to return the sensor HBLANK delay. The
HBLANK delay is set to the same value as VBLANK delay for all sensors in
the Raspberry Pi IPA.
Return the HBLANK gain delay from the IPA to the pipeline handler, and
initialise DelayedControls to handle V4L2_CID_HBLANK with this delay
value.
As a drive-by, check that the V4L2_CID_HBLANK control is available when
calling IPARPi::configure().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add fields for minimum and maximum line length (in units of pixels) to
the IPACameraSensorInfo structure. This replaces the existing lineLength
field.
Update the ipu3, raspberrypi and rkisp1 IPAs to use
IPACameraSensorInfo::minLineLength instead of
IPACameraSensorInfo::lineLength, as logically we will always want to use
the fastest sensor readout by default.
Since the IPAs now use minLineLength for their calculations, set the
starting value of the V4L2_CID_HBLANK control to its minimum in
CameraSensor::init().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Currently the pipeline handler advertises controls handled by the IPA
from a ControlInfoMap it manually constructs. This is wrong, as the IPA
module is the component that knows what controls it supports. Fix this
by moving the ControlInfoMap construction to the IPA module, and pass it
to the pipeline handler as a return value from the IPA init() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Florian Sylvestre <fsylvestre@baylibre.com>
|
|
The ipa currently advertises a static ControlInfoMap to specify the available
controls and their limits. Fix this limitation by having the IPA populate a new
ControlInfoMap with updated limits for ExposureTime, AnalogueGain, and
FrameDurationLimits controls based on the current sensor mode. This new
ControlInfoMap is then returned back to the pipeline handler and available to
the application after a successful Camera::configure() call.
Before the first call to Camera::configure(), this ControlInfoMap provides some
reasonable default limits for ExposureTime, AnalogueGain, and
FrameDurationLimits. However, applications must not rely on these values, but
obtain the correct limits after the call to Camera::configure().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Currently the pipeline handler advertises controls handled by the IPA from a
static ControlInfoMap defined in the raspberrypi.h header. This change removes
this header file, and instead the IPA returns the ControlInfoMap to the pipeline
handler from the ipa::init() function. This is done to allow the IPA to adjust
the limits of the controls based on the sensor mode in a subsequent change.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=83
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The C structures used to serialize controls are currently defined in the
root namespace, which places them at the root level in the class list
generated by Doxygen. Move them to the libcamera namespace to fix that.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
These changes retrieve the correct value for sensitivity of the mode
selected for the sensor. This value is known to the CamHelper which
passes it across to the pipeline handler so that it can be set
correctly in the camera properties.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
meson.source_root() and meson.build_root() are deprecated. Use
meson.project_source_root() and meson.project_build_root() instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Synchronise the names of the operations with respect to parameters
buffer with the names used in other IPA interfaces.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
It is preferred that the interface definition should represent
the logical order in which the operations will be called.
The patch has no functional changes.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The IPAIPU3 interface currently uses event-type based structures in
order to communicate with the pipeline-handler (and vice-versa).
Replace the event based structures with dedicated functions associated
to each operation.
The translated naming scheme of actions to signals are:
ActionSetSensorControls => setSensorControls
ActionParamFilled => paramsBufferReady
ActionMetadataReady => metadataReady
The translated naming scheme of events to dedicated functions are:
EventProcessControls => queueRequest()
EventStatReady => processStatsBuffer()
EventFillParams => fillParamsBuffer()
The dedicated functions are called from pipeline-handler to the IPA
using IPC. These functions run asynchronously and when completed,
the IPA emits the respective signals as stated above in the translated
naming scheme.
The EventProcessControls is translated to queueRequest() to bring
symmetry to the IPU3 interface with other IPA interfaces.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Enable the V4L2VideoDevice dequeue timeout for the Unicam Image node, and
connect the timeout signal to a slot in the pipeline handler. This slot will
log an error message informing the user of a possible hardware stall.
The timeout is calculated as 2x the maximum frame length possible for a given
mode, returned by the IPA.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Some of the values were listed incorrectly. Specifically:
ExposureValue: the range is now centred correctly on zero
Brightness: the default value (0.0) is made explicit
Contrast: the default value is corrected to be 1.0
Saturation: the default value is corrected to be 1.0
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Synchronise with other IPA interfaces (for e.g. IPU3, RkISP1)
that uses queueRequest() to pass in the request controls to
IPA.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Queuing of request (i.e. passing of controls to the IPA)
and filling of the parameters buffer are two separate operations.
Treat them as such by splitting them into two functions in
the rkisp1 IPA interface.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The IPARkISP1Interface currently uses event-type based structures in
order to communicate with the pipeline-handler (and vice-versa).
Replace the event based structures with dedicated functions associated
to each operation.
The translated naming scheme of operations to dedicated functions:
ActionV4L2Set => setSensorControls
ActionParamFilled => paramsBufferReady
ActionMetadata => metdataReady
EventSignalStatBuffer => processStatsBuffer()
EventQueueRequest => queueRequest()
The lexical of IPARkISP1::metadataReady() will now conflict with the
metadataReady Signal being introduced in this patch as part of the
interface change. Hence, rename IPARkISP1::metadataReady() to
IPARkISP1::prepareReady() to prevent the conflict.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Add further members to the ipu3 ipa interface that will hold lens
controls passed in by configInfo
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that we have a UniqueFD class, the name FileDescriptor is ambiguous.
Rename it to SharedFD.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
IPU3Event and IPU3Action use two fields for both libcamera controls and sensor
V4L2 controls. The patch extend one more field for lens V4L2 controls
for auto focus usage.
Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The pipeline handler populates a new sensorControls ControlList, to
have the effective exposure and gain values for the current frame. This
is done when a statistics buffer is received.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When the IPA is initialized, it will need to know the sensor model
used in order to properly call CameraSensorHelper for the analogue gain.
Modify the init definition in the pipeline handler and in the IPA as
well as the mojo interface to pass the IPASettings.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove the verbose #ifndef/#define/#endif pattern for maintaining
header idempotency, and replace it with a simple #pragma once.
This simplifies the headers, and prevents redundant changes when
header files get moved.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
IPU3Event and IPU3Action use single ControlList for both libcamera and
V4L2 controls, and it's content could be either one based on the
context. Extend IPU3Event and IPU3Action for sensor V4L2 controls, and
preserve the original one for only libcamera Controls to make the
content of an event more specific.
Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org>
[Jean-Michel: remove lensControls from the original patch]
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When a new CameraConfiguration is applied to the Camera the IPA is
configured as well, using the newly applied sensor configuration and its
updated V4L2 controls.
Also update the Camera controls at IPA::configure() time by re-computing
the controls::ExposureTime and controls::FrameDurationLimits limits and
update the controls on the pipeline handler side after having configured
the IPA.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Create local install_dir meson variable to store the full path to the
installation directory for the libcamera and ipa headers. This shortens
lines and avoids duplicating calls to get_option('includedir').
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPA::configure() function has an IPAConfigInfo parameters which
contains a map of numerical indexes to ControlInfoMap instances.
This is a leftover of the old IPA protocol, where it was not possible to
specify a rich interface as it is possible today and each entity
ControlInfoMap was indexed by a numerical id and stored in a map.
Now that the IPA interface allows to specify parameters by name, drop the
map and send the sensor's control info map only.
If we'll need more ControlInfoMap to be shared with the IPA, a new parameter
can be added to IPAConfigInfo.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Plumb through VIMC mojo interface to enable buffers passing.
VIMC does not have parameters or statistics buffers but we can
mimick the typical case of passing IPA buffers from pipeline
handler to IPA using mock buffers. The mock IPA buffers are
FrameBuffers which are dmabuf backed (in other words, mmap()able
through MappedFramebuffer inside the IPA).
This commits shows:
- Passing the parameter buffer from the pipeline handler to
the IPA through functions defined in mojom interface.
- Passing request controls ControlList to the IPA.
Any tests using VIMC will now loop in the IPA paths. Any tests running
in isolated mode will help us to test IPA IPC code paths especially
around (de)serialization of data passing from pipeline handlers to the
IPA. Future IPA interface tests can simply extend the vimc mojom
interface to achieve/test a specific use case as required.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
VIMC pipeline handler has dmabuf-backed mock FrameBuffers which are
specifically targetted mimicking IPA buffers (parameter and statistics).
Map these mock buffers to the VIMC IPA that would enable exercising IPA
IPC code paths. This will provide leverage to our test suite to test
IPA IPC code paths, which are common to various platforms.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As part of an effort to make the vimc IPA usable for testing, extend it
with a configure function. The configuration is currently ignored by the
IPA.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
All the IPU3 Camera controls are currently initialized by the pipeline
handler which initializes them using the camera sensor configuration and
platform specific requirements.
However, some controls are better initialized by the IPA, which might,
in example, cap the exposure times and frame duration to the constraints
of its algorithms implementation.
Also, moving forward, the IPA should register controls to report its
capabilities, in example the ability to enable/disable 3A algorithms on
request.
Move the existing controls initialization to the IPA, by providing
the sensor configuration and its controls to the IPU3IPA::init()
function, which initializes controls and returns them to the pipeline
through an output parameter.
The existing controls initialization has been copied verbatim from the
pipeline handler to the IPA, if not a for few line breaks adjustments
and the resulting Camera controls values are not changed.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Introduce a new field in the controls serialization protocol to
allow discerning which ControlIdMap a ControlInfoMap refers to.
The newly introduced IdMapType enumeration describes the possible
info maps:
- Either the globally available controls::controls and
properties::properties maps, which are valid across IPC boundaries
- A ControlIdMap created locally by the V4L2 device, which is not valid
across the IPC boundaries
At de-serialization time the idMapType field is inspected and
- If the idmap is a globally defined one, there's no need to create
new ControlId instances when populating the de-serialized
ControlInfoMap. Use the globally available map to retrieve the
ControlId reference and use it.
- If the idmap is a map only available locally, create a new ControlId
as it used to happen before this patch.
As a direct consequence, this change allows us to perform lookup by
ControlId reference on de-serialized ControlIdMap that refers to the
libcamera defined controls::controls and properties::properties.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
ControlInfoMap does not have a ControlId map associated, but rather
creates one with the generateIdMap() function at creation time.
As a consequence, when in the need to de-serialize a ControlInfoMap all
the ControlId it contains are created by the deserializer instance, not
being able to discern if the controls the ControlIdMap refers to are the
global libcamera controls (and properties) or instances local to the
V4L2 device that has first initialized the controls.
As a consequence the ControlId stored in a de-serialized map will always
be newly created entities, preventing lookup by ControlId reference on a
de-serialized ControlInfoMap.
In order to make it possible to use globally available ControlId
instances whenever possible, create ControlInfoMap with a reference to
an externally allocated ControlIdMap instead of generating one
internally.
As a consequence the class constructors take and additional argument,
which might be not pleasant to type in, but enforces the concepts that
ControlInfoMap should be created with controls part of the same id map.
As the ControlIdMap the ControlInfoMap refers to needs to be allocated
externally:
- Use the globally available controls::controls (or
properties::properties) id map when referring to libcamera controls
- The V4L2 device that creates ControlInfoMap by parsing the device's
controls has to allocate a ControlIdMap
- The ControlSerializer that de-serializes a ControlInfoMap has to
create and store the ControlIdMap the de-serialized info map refers to
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Usage of 'method' to refer to member functions comes from Java. The C++
standard uses the term 'function' only. Replace 'method' with 'function'
or 'member function' through the whole code base and documentation.
While at it, fix two typos (s/backeng/backend/).
The BoundMethod and Object::invokeMethod() are left as-is here, and will
be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The comment block at the beginning of the core.mojom file is meant to
provide an overview of how to use libcamera defined types in the definition
of mojom interfaces.
As the IPA/IPC interface definition mechanism evolved, the documentation
has not been updated accordingly.
Update the file comments to match the most recent IPA/IPC
interface definition and generation mechanism.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
libcamera names header files based on the classes they define. The
buffer.h file is an exception. Rename it to framebuffer.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the functionality for the following components to the new
base support library:
- BoundMethod
- EventDispatcher
- EventDispatcherPoll
- Log
- Message
- Object
- Signal
- Semaphore
- Thread
- Timer
While it would be preferable to see these split to move one component
per commit, these components are all interdependent upon each other,
which leaves us with one big change performing the move for all of them.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPU3 IPA interface does not define a return value from configure().
This prevents errors from being reported back to the pipeline handler
when they occur in the IPA.
Update the IPU3 IPA interface and add return values to the checks in
IPAIPU3::configure() accordingly
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We don't want to generate the same functional files for core.mojom as
the other mojom files, but we do want to generate the documentation cpp
files. Add core.mojom to the mojom files list after the main generation
is complete, so that the documentation generator can pick it up.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Move the documentation back to the mojom file from the cpp file. While
at it, move the documentation for IPAInterface::init() and
IPAInterface::stop() to the IPA guide.
While at it, update the todo comment in all of the mojom files
accordingly.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
[umang.jain@ideasonboard.com: Update todos]
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Use meson's files() to list the mojom files instead of the file names
directly. This is so that we can still access the files from
src/libcamera/ipa/meson.build later for building documentation cpp
files from the mojom files.
While at it, fix some redundant string manipulation in building the
mojom modules.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
We need a separate control to report the nominal frame duration, but
it's also useful to report the min/max frame duration values that will
be used. Split the FrameDurations control into FrameDuration and
FrameDurationLimits respectively to support both of these.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Pass in frame timestamps from IPU3 pipeline handler to IPU3 IPA via
IPU3Event. Frame timestamps are helpful to IPA algorithms to
convergence, by setting them via IPA stats.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ControlInfoMap of entityControls member in IPAConfigInfo struct,
was not able to correctly match to the ControlInfoMap defined in
core.mojom. This resulted in a FATAL breakage when IPU3 IPA is meant to
run:
FATAL IPADataSerializer ipa_data_serializer.cpp:437 ControlSerializer
not provided for serialization of ControlInfoMap
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
IPAConfigInfo is a consolidated data structure passed from IPU3
pipeline-handler to IPU3 IPA. The structure can be extended with
additional parameters to accommodate the requirements of multiple
IPU3 IPA modules.
Adapt the in-tree IPU3 IPA to use IPAConfigInfo as well.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Generated IPA headers from mojom files need to be installed to
$INCLUDE_PATH in order to be available system-wide. Without this,
out-of-tree IPAs won't be able to link and build themselves.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This matches the naming convention for IPA IPC.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
