| Age | Commit message (Collapse) | Author |
|---|
|
Doxygen fails to create the documentation with this message:
[145/276] Generating doxygen with a custom command
sh: 1: dot: not found
error: Problems running dot: exit code=127, command='dot', arguments='"/home/user/libcamera/build/Documentation/api-html/inline_dotgraph_1.dot" -Tpng -o "/home/user/libcamera/build/Documentation/api-html/dot_inline_dotgraph_1.png"'
sh: 1: dot: not found
error: Problems running dot: exit code=127, command='dot', arguments='"/home/user/libcamera/build/Documentation/api-html/inline_dotgraph_1.dot" -Tcmapx -o "/home/user/libcamera/build/Documentation/api-html/dot_inline_dotgraph_1.map"'
[276/276] Linking target test/utils
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ricardo@ribalda.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Without it:
Run-time dependency libtiff-4 found: NO (tried pkgconfig and cmake)
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ricardo@ribalda.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Without it:
Program /usr/lib/x86_64-linux-gnu/qt5/bin/lrelease found: NO
Program lrelease-qt5 found: NO
Program lrelease found: NO found but need: '== 5.14.2'
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ricardo@ribalda.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
pkg-config it is not only used to detect libudev-dev, it is used for
detecting gstreamer and others. So it is more correct to place it on the
Meson Build system section.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ricardo@ribalda.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Raspberry Pi IPA, which is enabled by default, requires libboost to
compile.
Specify in the documentation its dependencies and how to disable the
IPA.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ricardo@ribalda.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ricardo@ribalda.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
All the dependencies are for libcamera, so we should move all the
packages under this paragraph, or make a paragraph for Meson, and a
second one for python3-yaml. I think the later is more clear.
Signed-off-by: Ricardo Ribalda <ricardo@ribalda.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
IPA module signing is optional, but when not available due to missing
dependencies, we hit failures due to a non fully implemented IPA
isolation. Make module signing mandatory until isolation is functional.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Document the dependency on libgnutls28-dev and openssl for IPA module
signing int he README.rst file. While at it, sort the entries
alphabetically.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The documentation files are licensed under CC-BY-SA-4.0, but this has
never been specified explicitly. Add corresponding SPDX headers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This is a quick startup guide allowing to build and use the GStreamer element
from the libcamera source tree.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The commit 2de78434ca71 ("meson: Bump required version to 0.47")
included an extra duplicated line (my bad, the issue happened when
applying). Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This is needed to use option type 'feature'. This is a tri-state
(auto/enabled/disabled) which comes with utility to enable them all, or
disabled them all to avoid any dynamic selection happening. It can also
be used as value to any "required" field.
This will be used in GStreamer support. If you don't have a recent enough
meson in your distribution, you can always install or upgrade your version
using pip3.
pip3 install --user meson
pip3 install --user --upgrade meson
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Less typing for the same result.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As the Getting Started section is displayed on the website, it should
contain commands related to cloning the repository.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Getting Started information makes little sense on the generated
documentation, as a developer with documentation compiled from a local
libcamera source tree has already got started. We however want to keep
the information in the top-level README.rst as it is useful there.
In order to hide the Getting Started information from the front page
while keeping it in README.rst, add comments to delimitate sections of
README.rst, and include only a subset of the file in the front page.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Bring back auto-generation of control ids. In this version, both the
header and the source files are generated from a single YAML file that
stores all control definitions. This allows centralising controls in a
single file, while the previous version required keeping both
declarations (in a header) and documentation (in a the source) in sync
manually.
Using YAML as a format to store control definitions is a trade-off
between ease of use (there are many YAML parsers available) and
simplicity (XML was considered, but would have lead to more complex
processing). A new build time dependency is added on python3-yaml, which
should be available as a package in all distributions and build
environments.
The YAML format is likely to change over time as we improve
documentation of controls, the first version simply copies the
information currently available. Future improvements should also include
a YAML schema to validate the YAML source file.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Provide an initial list of build dependancies for Debian based systems.
Other distributions will be added separately.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Move the introduction content from the index.rst to the README.rst so
that it can also be found quickly from the top level.
Include the README.rst directly into the index.rst to continue serving
it as the front page material.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Documentation and top-level README both serve to provide information
to new developers and users of libcamera.
Currently our README.md is sparse, and should be expanded with more
useful information such as build requirements as well as compilation
directions.
Any information provided in the README also serves a purpose in the main
documentation and website and could be a cause of duplicated content.
To allow direct integration of the top level README document into our
sphinx documentation (and thus the libcamera.org website) convert the
README.md into ReSTructured text format.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
