| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds support for the Soho Enterprises SE327M12 module. The
sensor is an imx327 which therefore uses the imx290 kernel driver and
CamHelper.
To use this module and camera tuning, place the following in the
/boot/config.txt file:
dtoverlay=imx290,clock-frequency=37125000
and then the existing imx290.json file must be over-written with
se327m12.json
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If the ISP::Output0 stream has not been configured, we must enable it
with a default format and resolution for internal use. This is to allow
the pipeline handler data flow to be consistent, and allow the IPA to
receive statistics for the frame.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
It is possible for the application to call pipeline_handler::configure()
multiple times, which would attempt to open the Unicam embedded data
node on every call. This would cause a warning message as the node
would have already been opened. Avoid this by tracking if the node
has previously been opened.
Note that this is a temporary fix since the open call for the Unicam
embedded data node will be moved from pipeline_handler::configure() to
pipeline_handler::match().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Document struct DelayedControls::ControlParams and its associated
fields.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If gst_buffer_pool_acquire_buffer in gst_libcamera_task_run fails, the
unique_ptr to the request-object gets reset and hence, its destructor
is called. However, the wrap-object points to the same object and is
still alive at this moment. When the task_run-function is finished, the
destructor of the wrap-object is called, which in return calls the
destructor of the request-object again.
Instead of taking care of both, the request and the wrap-object, we can
move the request to the wrap which will then effectively take care of
the request object automatically.
Signed-off-by: Marian Cichy <m.cichy@pengutronix.de>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
|
|
There was a typo in the unit test filename. Fix this typo, no other
functional change in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The recent fixes applied to DelayedControls change the behavior of the
library. As such, the tests ended up failing as they relied on the old
behavior of the helper. Update the tests to account for the new behavior
and get the tests passing again.
Specifically, the following changes have been made for each test:
singleControlNoDelay():
- Add a call to reset() to initialise internal DelayedControls state
only after setting the control on the device.
- Trigger a first frame start by calling applyControls() as a pipeline
handler would.
- Test frames from 1 onwards, as we will never have a queue item at
frame 0, since the reset() handles that.
singleControlWithDelay():
- Trigger a first frame start by calling applyControls() as a pipeline
handler would.
- Test frames from 1 onwards, as we will never have a queue item at
frame 0, since the reset() handles that.
dualControlsWithDelay() and dualControlsMultiQueue():
- Trigger a first frame start by calling applyControls() as a pipeline
handler would.
- Test frames from (startOffset + 1) onwards, as we will never have a
queue item at frame startOffset.
- Use the max delay (2 in this case) to determine the expected result
value.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There was an off-by-one error in DelayedControls::get() when picking
controls from the queue to return back to the pipeline handler.
This is only noticeable as small oscillations in brightness when closely
viewing frame while AGC is running. The old StaggeredCtrl did not show
this error as the startup queuing mechanism has changed in
DelayedControls.
Fix this by indexing to the correct position in the queue.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reported-by: David Plowman <david.plowman@raspberrypi.com>
Fixes: 3d4b7b005911 ("libcamera: delayed_controls: Add helper for controls that apply with a delay")
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In DelayedControls::applyControls(), the controls queue would be
extended via a no-op control push to fill the intermittent slots with
unchanged control values. This is needed so that we read back unchanged
control values correctly on every frame.
However, there was one additional no-op performed on every frame that is
not required, meaning that any controls queued by the pipeline handler
would have their write delayed by one further frame. The original
StaggeredCtrl did not do this, as it only had one index to manage,
whereas DelayedControls uses two.
Remove this last no-op push so that the pipeline_handler provided
controls would be written on the very next frame if possible. As a
consequence, we must mark the control update as completed within the
DelayedControls::applyControls() loop, otherwise it might get reused
when cycling through the ring buffer.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reported-by: David Plowman <david.plowman@raspberrypi.com>
Fixes: 3d4b7b005911 ("libcamera: delayed_controls: Add helper for controls that apply with a delay")
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
On DelayedControls::reset(), the values retrieved from the sensor device
were added to the queues with the updated flag set to true. This would
cause the helper to write out the value to the device again on the first
DelayedControls::applyControls() call. This is unnecessary, as the
controls written are identical to what is stored in the device driver.
Fix this by explicitly setting the update flag to false in
DelayedControls::reset() when adding the controls to the queue.
Additionally, use the Info() constructor when adding items to the queue
for consistency.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Fixes: 3d4b7b005911 ("libcamera: delayed_controls: Add helper for controls that apply with a delay")
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This script will parse log output from the DelayedControls helper, when
enabled with:
LIBCAMERA_LOG_LEVELS=DelayedControls:0
It tabulates all control queuing/writing/getting per frame and warns
about potential issues related to frame delays not being account for, or
writes that are lagging behind or missed.
Run with the following command:
python3 ./delayedctrls_parse.py <logfile>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Fix python raw strings]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If an exposure time change adjusts the vblanking limits, and we set both
VBLANK and EXPOSURE controls through the VIDIOC_S_EXT_CTRLS ioctl, the
latter may fail if the value is outside of the limits calculated by the
old VBLANK value. This is a limitation in V4L2 and cannot be fixed by
setting VBLANK before EXPOSURE in a single VIDIOC_S_EXT_CTRLS ioctl.
The workaround here is to have the DelayedControls object mark the
VBLANK control as "priority write", which then write VBLANK separately
from (and ahead of) any other controls. This way, the sensor driver will
update the EXPOSURE control with new limits before the new values is
presented, and will thus be seen as valid.
To support this, a new struct DelayedControls::ControlParams is used in
the constructor to provide the control delay value as well as the
priority write flag.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Fix up trivial comments, merge conflicts]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We borrowed a GstBuffer from the pool, if preparing the buffer failed,
we need to push it back to avoid leaking it.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Both the DeviceProvider and Device classes had the same mistake,
calling G_OBJECT_GET_CLASS() instead of G_OBJECT_CLASS() when
chaining their finalize call to their base class. This would
crash at destruction, which was causing gst-device-monitor-1.0
tool to crash and application using that API to crash too.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In kernel 5.11 the rkisp1 uapi had changed to support different hardware
revisions. Currently only revision 10 is supported by the rkisp1 IPA and
therefore 'init' should fail if the revision is not 10.
This changes depends on the kernel driver reporting the hardware
revision, and thus requires the rkisp1 driver from v5.11 or newer.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The IPA of rkisp1 relies on some of the camera's controls.
Therefore it can't work if those controls are not given.
Return -EINVAL from 'configure' in that case.
Also return error from the pipeline's 'configure' method
if the IPA configure fails.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a method 'hwRevision' to return the
info.hw_version reported by the driver.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
According to the EXIF specification, the GPS method should be UNDEFINED,
and the first 8 bytes will designate the type. However, CTS expects the
first 8 bytes to be part of the data. Remove the 8-byte encoding
designator by changing the encoding to NoEncoding to appease CTS.
This is part of the fix that allows the following CTS test to pass:
- android.hardware.cts.CameraTest#testJpegExif
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
There was a copy-paste error that caused the latitude to be set twice and
the longitude never. Fix this.
This is part of the fix that allows the following CTS test to pass:
- android.hardware.cts.CameraTest#testJpegExif
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that setRational() supports setting multiple rational values, use
that in setGPSDateTimestamp and setGPSDMS which previously set every
rational manually.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
setRational was not working properly for EXIF tags in the GPS IFD due to
libexif not supporting those tags in exif_entry_initialize(). Manually
specify the size of the EXIF entry to fix this. While at it, add support
for setting multiple rationals, as that is a common use case for
rational EXIF tags.
As Rational types are no longer initialized by libexif directly, the
EXIF_TAG_{X,Y}_RESOLUTION exif tags will not have their default values
populated.
This allows the GPS altitude to be set properly, and is part of the fix
to allow the following CTS test to pass:
- android.hardware.cts.CameraTest#testJpegExif
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The capture request template for video recording use cases requires
a fixed FPS range. Generate the request templates for the VIDEO_RECORD
and VIDEO_SNAPSHOT capture intents using the preview template and
updating the supported FPS range.
This change fixes the CTS tests
android.hardware.camera2.cts.CameraDeviceTest#testCameraDeviceRecordingTemplate
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The camera supported FPS range is crucial to distinguish between
capture templates for preview and video recording. If the pipeline
handler did not specify an available FPS range by registering the
controls::FrameDurations property so far the control was simply not
added to the generated capture template.
In order to prepare to generate templates for video recording which
require a fixed FPS range, fail earlier in generating any template at
all if the available FPS range is not provided by the Camera.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The current implementation of constructDefaultRequestSettings()
returns the same capture template for all the capture intent.
As the correctness of the generated template is verified by CTS it
is better to return an error for unsupported capture use cases.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The result metadata reports an arbitrary {30, 30} FPS range for the
AE algorithm.
The actual FPS range should be returned in the Request::metadata, but
as libcamera currently does not support that feature temporarily work
around the issue and return the FPS range requested by the camera
framework.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The request template returned by requestTemplatePreview() uses an
arbitrary {15, 30} Auto-Exposure algorithm FPS range. Use the one
calculated at static metadata creation time, which is consistent with
the camera limits.
Once template generation will be performed inspecting the requested
capture intent, the FPS range over which the AE algorithm can range
shall be tuned accordingly.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the FrameDuration control reported by pipeline handlers to register
the Auto-Exposure routine FPS range, the minimum stream frame durations
and the sensor maximum frame duration.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the FrameDurations control in the IPU3 pipeline handler
computed using the vertical blanking limits and the sensor
pixel rate as parameters.
The FrameDurations control limits should be updated everytime a new
configuration is applied to the sensor.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The controls' limits initialized by the IPU3 pipeline handler depend
on the sensor configuration. In order to compute controls using a known
state apply to the sensor a configuration equal to its own resolution.
Move the \todo note regarding the controls' limits dependency on the
sensor configuration at the beginning of the function and remove the
other redundant ones in the function body.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that we support returning int directly in addition to other output
parameters, improve the configure() function in the raspberrypi IPA
interface.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
To make it more convenient for synchronous IPA calls to return a status,
convert the first output into a direct return if it is an int32.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Add support to the mojom-based code generator for custom parameters to
init(). Remove the parameter type and count validation as well.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The name vblankDelay is clearer.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
imx290 and imx327 share the same kernel driver (imx290.c) and are
therefore both recognised here as "imx290". We add the necessary
CamHelper for these sensors, as well as a camera tuning file.
The tuning was done with an Innomaker STARVIS IMX327LQR module. These
have no IR cut filter so there is no proper colour tuning. However,
you should obtain reasonable results for most modules using this
sensor. Specific tunings for further modules can always be added
subsequently.
To use this sensor on the Raspberry Pi platform, please add
dtoverlay=imx290,clock-frequency=74250000
into your /boot/config.txt file.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
For some sensors (e.g. imx477) we need to update the vblanking on the
frame before the exposure. For this reason the GetDelays method must
also return the number of frame delays for the vblanking control.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Since commit 96aecfe36508 ("libcamera: camera_sensor: Use active area
size as resolution") the CameraSensor::resolution() method returned the
sensor's active pixel area size.
As the CameraSensor::resolution() method is widely used in the library
code base to retrieve the maximum frame size the sensor can produce,
in case it is smaller than the pixel area size the returned size cannot
be used to configure the sensor correctly.
Fix this by returning the maximum frame resolution the sensor can
produce, or the pixel area size in case the sensor embeds and ISP that
can upscale and the supported maximum frame size is thus larger that
the pixel array size.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a script to update the local copy of kernel headers (in
include/linux/) from a Linux kernel git tree. The script handles header
installation, manual processing of the IPU3 header that is still in
staging, and update of the README file.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We aim to ensure that our includes are alphabetically sorted. Whilst
checkstyle.py also handles this, enable the clang-format explicitly to
define the code-style requirement, and allow clang-format to also
correct un-sorted header includes.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The libcamera coding style allows functions to be defined on a single
line only when they're inline. Update the clang-format configuration
accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add all options available in the new version that were previously
commented out (or just not listed). The commented out value is replaced
by the clang-format-7 default where they differ, to avoid changing the
current behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the IPU3Frames completes, it deletes the internal info storage.
This storage contains the pointer to the Request, but in some cases the
pointer was being accessed after the info structure was removed.
Ensure that the Request is obtained before attempting to complete to
obtain a valid pointer.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix trivial spelling mistake.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add tracing to the base pipeline handler class to track when requests are queued.
Tracing is already available for other Request operations, but queuing a Request
is not an operation handled by the Request itself.
Add the tracepoint to the PipelineHandler::queueRequest() so the lifetime of a
Request can be viewed when tracing.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The packages required for tracing libcamera projects were incorrectly
specified.
Update with the correct prefix for the dev package on liblttng-ust-dev
and also provide the lttng-tools package which provides the utilities
required to handle tracing.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When a pipeline handler completes a request, the request itself is not
deleted by libcamera, and the application regains control over the
object. It may choose to delete the Request, or re-use it.
Clarify this in the comment by removing the declaration that the Request
is deleted, but state that it is no longer managed by the pipeline
handler and must not be accessed further after this function returns.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Requests should only be completed from the RequestPending state.
Requests which are completed from the RequestCancelled, or RequestComplete
state, will indicate that a double-complete has been called on the Request,
or that it has been used internally after it has been given back to the
application.
Ensure that this can be caught early if it occurs by enforcing the state
required with an assert.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When configuring streams, the camera HAL is supposed to update the
gralloc usage flags to reflect the operations it will need to do on the
stream buffers. Failure to do so leads to incorrect format selection by
gralloc for the HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED format, as
gralloc will not take into consideration the need of the camera to
access the buffers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Camera sensors can include an ISP. For instance, the AP1302 external ISP
can be connected to up to two raw camera sensors, and the combination of
the sensors and ISP is considered as a (smart) camera sensor from
libcamera's point of view.
The CameraSensor class has limited support for this already. Extend the
simple pipeline handler to support such sensors, by using the media
entity corresponding to the ISP instead of the raw camera sensor's
entity.
We don't need to handle the case where an entity in the SoC would expose
the MEDIA_ENT_F_PROC_VIDEO_ISP function, as pipeline containing an ISP
would have a dedicated pipeline handler.
The implementation is limited as it won't support other multi-entity
camera sensors (such as CCS). While this would be worth supporting, we
don't have a test platform with a CCS-compatible sensor at this point,
so let's not over-engineer the solution. Extending support to CCS (and
possibly other sensor topologies) will likely involve helpers that can
be used by other pipeline handlers (such as generic graph walk helpers
for instance) and extensions to the CameraSensor class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When walking the pipeline, follow the first link of each source pad.
This patch removes a redundant condition for choosing the link:
"(link->flags() & MEDIA_LNK_FL_ENABLED) ||
!(link->flags() & MEDIA_LNK_FL_IMMUTABLE)"
since it always returns true.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
