| Age | Commit message (Collapse) | Author |
|---|
|
libcamera is in the process of defining its own set of controls
to enable applications to control the image capture process and
return information on the captured frames.
To temporarily close the gap in the Android camera HAL and support all
controls required in the LIMITED hardware level, define a set of Draft
controls whose values are taken from their Android definition, in order
to allow pipeline handlers to support Android.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Extend the control and property framework to support exposing draft
controls and properties in a scoped namespace.
The controls/properties themselves will retain the same ordering in the
relevant enum/id maps - but the access to any draft control will require
explicitly referencing through its' draft:: namespace prefix.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Added missing hunk in control_ids.cpp.in and changed subject]
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The ControlValue<T> constructor for non-array values is a template
function that participates in overload resolution for all T types that
are not Span or std::string. Other T types that are not supported then
result in a compilation error.
This causes issues when calling an overloaded function that can accept
both a ControlValue and a Span with an std::array<U> parameter. The
first overload will be resolved using implicit construction of a
ControlValue from the std::array<U>, while the second overload will be
resolved using implicit construction of a Span<U> from the
std::array<U>. This results in a compilation error due to an ambiguous
function call.
The first overload is invalid, selecting it would result in a
compilation error in the ControlValue constructor, as the
ControlValue<T> constructor doesn't support std::array<U> for type T.
The compiler can't know about that, as overload resolution happens
earlier.
To fix it, we can disable the ControlValue<T> constructor for
unsupported types T, moving the type check from compilation of the
function to overload resolution. The constructor will not participate in
overload resolution, and the call won't be ambiguous. The end result is
the same for unsupported types, compilation will fail.
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Following the reasoning of pass-by-value for libcamera::Span
parameters from 90c193f2a700("android: Modify Encoder interface") i.e.
they are easy to copy/move/construct, align the Exif parameter passing
to the encoder interface in this consistent way.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Drop "libcamera::" from functions' arguments for *.cpp files as they
have
using namespace libcamera;
directive in the beginning.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The base class of polymorphic classes is required to declare a
destructor. Several of these are empty, and can thus be declared as
defaulted.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
A few default constructors and destructors are needlessly defined as
empty. Drop them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The MediaEntity, MediaLink and MediaPad classes don't need custom
destructors. For MediaEntity and MediaPad, the destructors clear a
vector embedded in the classes, which will be done by the default
destructor. For MediaLink, the destructor is already empty. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Initialize the CameraData properties with the properties exposed by the
sensor.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Tested-by: Andrey Konovalov <andrey.konovalov@linaro.org>
|
|
The rkisp1 and simple pipeline handlers can fail to register any camera,
if initialization of all the detected cameras fail. In that case, they
still return success from their match function. As no camera gets
registered, the pipeline handler is immediately destroyed, releasing the
acquired media devices, and the camera manager immediately tries to
match the same pipeline handler with the same media device, causing an
endless loop.
Fix it by returning false from the match function if no camera gets
registered.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Tested-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Shadowing variables can lead to unexpected bugs where a code path
utilises a variable that may not have been intended by the developer,
leading to hard to find bugs.
Enable warnings for shadowed variables as defined at:
https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wshadow
As an effect of utilising -Werror, this will cause variable or type
shadowing to become a build-time error.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Rename the scoped usage of the variable format while iterating the formats
as it shadows the outer scoped format which is used for specific testing.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The buffer obtained for queuing to a raw stream shadows the buffer
passed in for the main view finder stream.
Prevent shadowing, and explicitly name the buffer as a separate variable.
Suggested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The parseValue function is given the optarg directly from the getopt
library, but the function retains the same name.
This causes an shadowed variable of the global optarg variable to be
present in the parseValue function. While this is not harmful, rename it
to work towards disabling shadowed variables.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Rename the internal member variables to use the post-fixed '_' member
variable naming style. This in turn ensures variable shadowing does not
occur in the member initializer list of the constructor.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Do not warn on shadowed variables inside the metadata library,
which is directly imported without modifications.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
A FrameBuffer *buffer is used to obtain the 'first' buffer from a
request which is used purely to identify the timestamp from the
metadata in two locations.
Rather than keep the FrameBuffer instance around, which then causes
further usages of FrameBuffers to be shadowed, store the timestamp
locally.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the postfixed '_' member variable naming style for the
Camera3RequestDescriptor structure, which in turn ensures that variable
shadowing does not occur in the member initializer list of the
constructor.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Prevent variable shadowing by removing the redeclaration of variables
with the same name (and type) where the existing variable can be reused.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The function gauss_seidel2_SOR() makes use of a function scoped iterator
'i', for several loops, and has a precedence of re-using the function
scoped iterator declaration in the majority of cases, except the first
where it is declared in the loop scope before the function scope, and
later which aliases a new declaration.
Re-use the existing iterator variable for consistency, and to prevent
variable aliasing.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The members free, and lastUsed were not following the libcamera coding
style, and were producing a shadowed parameter on the construction.
Rename them to be marked as member variables with the _ postfix
accordingly.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The FrameBuffer used to track any addition to the request in an
under-run event was shadowed against the returned buffer, being placed
back on the availableBuffers_ queue.
Rename the shadowed variable to be more explicit that it is a separate
Buffer.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Prevent variable shadowing by removing the redeclaration of variables
with the same name (and type) where the existing variable can be reused.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove variable shadowing within the pipeline handler implementations.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Thread::wait() function creates a boolean flag 'finished' which
shadows the internal member signal of the same name.
Rename the boolean flag to prevent confusion and shadowing of the signal.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
CameraStream initializes several member variables in the
initializer list. Some of them are unchanged after. This makes
them constant. Especially, doing to |cameraDevice_| represents
CameraStream doesn't have the ownership of it.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
PostProcessorJpeg doesn't have the ownership of CameraDevice given
in the constructor. To clarify it, this makes the member variable
constant.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In Encoder::encode(), the |source| argument doesn't have to be a
pointer. This replaces its type, const pointer, with const
reference as the latter is preferred to the former.
libcamera::Span is cheap to construct/copy/move. We should deal
with the type as pass-by-value parameter. Therefore this also
drops the const reference in the |destination| argument.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In PostProcessor::process(), the |source| argument doesn't have
to be a pointer. This replaces its type, const pointer, with
const reference as the latter is preferred to the former.
libcamera::Span is cheap to construct/copy/move. We should deal
with the type as pass-by-value parameter. Therefore this also
drops the const reference in the |destination| argument.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The libcamera namespace has been left undefined from the start. While
the documentation doesn't bring much added value, leaving it out
confuses the most recent doxygen master branch:
include/libcamera/transform.h:16: warning: Internal inconsistency: member Identity does not belong to any container!
include/libcamera/transform.h:17: warning: Internal inconsistency: member Rot0 does not belong to any container!
include/libcamera/transform.h:18: warning: Internal inconsistency: member HFlip does not belong to any container!
include/libcamera/transform.h:19: warning: Internal inconsistency: member VFlip does not belong to any container!
include/libcamera/transform.h:20: warning: Internal inconsistency: member HVFlip does not belong to any container!
include/libcamera/transform.h:21: warning: Internal inconsistency: member Rot180 does not belong to any container!
include/libcamera/transform.h:22: warning: Internal inconsistency: member Transpose does not belong to any container!
include/libcamera/transform.h:23: warning: Internal inconsistency: member Rot270 does not belong to any container!
include/libcamera/transform.h:24: warning: Internal inconsistency: member Rot90 does not belong to any container!
include/libcamera/transform.h:26: warning: Internal inconsistency: member Rot180Transpose does not belong to any container!
Document it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Make the whole code base consistent by placing the doxygen \file block
above the libcamera namespace opening. There's a single offender, and
two locations in which a white line is missing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The pipeline-specific IPA headers are not part of the libcamera API,
they should thus be skipped when generating documentation. doxygen
doesn't complain currently due to the fact that types defined in those
headers are part of undocumented namespaces. In preparation for
documenting the libcamera namespace, make sure the headers don't get
parsed by doxygen.
Only vimc.h needs a header guard, as rkisp1.h uses the global namespace
and raspberrypi.h uses the undocumented libcamera::RPi namespace,
neither of which cause issues. Still, for consistency, add header guards
to all headers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To be consistent with the other pipeline handlers that don't prefix
their IPA protocol header with ipa_, rename ipa_vimc.h to vimc.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The option, -Wextra-semi, helps developers to find unnecessary
semicolons. This option is available with clang.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There is the unnecessary semicolon after ipaCreate() in
raspberrypi.cpp. This removes it.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The end semicolons with LOG_DEFINE_CATEGORY,
LOG_DECLARE_CATEGORY and REGISTER_PIPELINE_HANDLER are
unnecessary.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This removes the unnecessary semicolon in span.h.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The end semicolons with LOG_DECLARE_CATEGORY and
LOG_DEFINE_CATEGORY are unnecessary.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Macros used in gstreamer (e.g. G_DEFINE_TYPE) are functions. The
end semicolons with the macros are unnecessary.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
LOG_DECLARE_CATEGORY macro contains the semicolon. The end
semicolon with the macro is unnecessary.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
TEST_REGISTER macro is main function. The end semicolon with the
macro is unnecessary.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The V4L2_CID_USER_BCM2835_ISP_BASE has changed in the downstream
Raspberry Pi 5.9 kernel to match the upstream defines, see here:
https://github.com/raspberrypi/linux/pull/3897.
Note, that this will cause an ABI breakage with the current downstream
Raspberry Pi 5.4 kernel until both this change and the following PR has
been merged: https://github.com/raspberrypi/linux/pull/3897
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Port the CameraStream's JPEG-encoding bits to PostProcessorJpeg.
This encapsulates the encoder and EXIF generation code into the
PostProcessorJpeg layer and removes these specifics related to JPEG,
from the CameraStream itself.
Signed-off-by: Umang Jain <email@uajain.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Change-Id: Id9e6e9b2bec83493a90e5e126298a2bb2ed2232a
|
|
Introduce a PostProcessor interface for the streams that require any
kind of processing (refer to CameraStream::Type) for their consumption
by the HAL layer. The PostProcessor interface can be configured via
configure() and the actual processing can be initiated using process().
The post-processing layer can be extended to have multiple post
processors for various stream configurations. As of now, we only have
one post processor (JPEG), hence the subsequent commit will port its
function to this interface.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a brief documentation block to the CameraStream class.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a CameraWorker class member to the CameraDevice class and
queue capture requests to it to delegate its handling. Start and
stop the CameraWorker when the libcamera::Camera is started or
stopped.
Tie the CaptureRequest lifetime to the Camera3RequestDescriptor's one
by storing it as unique_ptr<> in the descriptor to simplify handling
of request creation and deletion.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Android camera framework provides for each buffer part of a capture
request an acquisition fence the camera HAL is supposed to wait on
before using the buffer. As the libcamera HAL runs in the camera service
thread, it is not possible to perform a synchronous wait there.
Introduce a CameraWorker class that runs an internal thread to wait
on a set of fences before queueing a capture request to the
libcamera::Camera.
Fences completion is handled through a simple poll, similar in
implementation to the sync_wait() function provided by libdrm.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Define a control to report the AWB algorithm locking state.
The control definition is copied from the AeLocked one.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
operator[] doesn't check if the option exists in the values_ map, so it
can return a pointer to location outside the map.
Fix by returning an empty OptionValue if the option is not found.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Adjust s_empty naming to 'empty']
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
