diff options
13 files changed, 680 insertions, 1660 deletions
diff --git a/include/android/hardware/libhardware/include/hardware/camera3.h b/include/android/hardware/libhardware/include/hardware/camera3.h index d89bc930..fd1e2072 100644 --- a/include/android/hardware/libhardware/include/hardware/camera3.h +++ b/include/android/hardware/libhardware/include/hardware/camera3.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: Apache-2.0 */ /* - * Copyright (C) 2013 The Android Open Source Project + * Copyright (C) 2013-2018 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. @@ -22,21 +22,21 @@ #include "camera_common.h" /** - * Camera device HAL 3.3 [ CAMERA_DEVICE_API_VERSION_3_3 ] + * Camera device HAL 3.5[ CAMERA_DEVICE_API_VERSION_3_5 ] * * This is the current recommended version of the camera device HAL. * * Supports the android.hardware.Camera API, and as of v3.2, the - * android.hardware.camera2 API in LIMITED or FULL modes. + * android.hardware.camera2 API as LIMITED or above hardware level. * * Camera devices that support this version of the HAL must return - * CAMERA_DEVICE_API_VERSION_3_3 in camera_device_t.common.version and in + * CAMERA_DEVICE_API_VERSION_3_5 in camera_device_t.common.version and in * camera_info_t.device_version (from camera_module_t.get_camera_info). * - * CAMERA_DEVICE_API_VERSION_3_3: - * Camera modules that may contain version 3.3 devices must implement at - * least version 2.2 of the camera module interface (as defined by - * camera_module_t.common.module_api_version). + * CAMERA_DEVICE_API_VERSION_3_3 and above: + * Camera modules that may contain version 3.3 or above devices must + * implement at least version 2.2 of the camera module interface (as defined + * by camera_module_t.common.module_api_version). * * CAMERA_DEVICE_API_VERSION_3_2: * Camera modules that may contain version 3.2 devices must implement at @@ -138,6 +138,52 @@ * * - Addition of camera3 stream configuration operation mode to camera3_stream_configuration_t * + * 3.4: Minor additions to supported metadata and changes to data_space support + * + * - Add ANDROID_SENSOR_OPAQUE_RAW_SIZE static metadata as mandatory if + * RAW_OPAQUE format is supported. + * + * - Add ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST_RANGE static metadata as + * mandatory if any RAW format is supported + * + * - Switch camera3_stream_t data_space field to a more flexible definition, + * using the version 0 definition of dataspace encoding. + * + * - General metadata additions which are available to use for HALv3.2 or + * newer: + * - ANDROID_INFO_SUPPORTED_HARDWARE_LEVEL_3 + * - ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST + * - ANDROID_CONTROL_POST_RAW_SENSITIVITY_BOOST_RANGE + * - ANDROID_SENSOR_DYNAMIC_BLACK_LEVEL + * - ANDROID_SENSOR_DYNAMIC_WHITE_LEVEL + * - ANDROID_SENSOR_OPAQUE_RAW_SIZE + * - ANDROID_SENSOR_OPTICAL_BLACK_REGIONS + * + * 3.5: Minor revisions to support session parameters and logical multi camera: + * + * - Add ANDROID_REQUEST_AVAILABLE_SESSION_KEYS static metadata, which is + * optional for implementations that want to support session parameters. If support is + * needed, then Hal should populate the list with all available capture request keys + * that can cause severe processing delays when modified by client. Typical examples + * include parameters that require time-consuming HW re-configuration or internal camera + * pipeline update. + * + * - Add a session parameter field to camera3_stream_configuration which can be populated + * by clients with initial values for the keys found in ANDROID_REQUEST_AVAILABLE_SESSION_KEYS. + * + * - Metadata additions for logical multi camera capability: + * - ANDROID_REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA + * - ANDROID_LOGICAL_MULTI_CAMERA_PHYSICAL_IDS + * - ANDROID_LOGICAL_MULTI_CAMERA_SYNC_TYPE + * + * - Add physical camera id field in camera3_stream, so that for a logical + * multi camera, the application has the option to specify which physical camera + * a particular stream is configured on. + * + * - Add physical camera id and settings field in camera3_capture_request, so that + * for a logical multi camera, the application has the option to specify individual + * settings for a particular physical device. + * */ /** @@ -1460,6 +1506,13 @@ typedef enum camera3_stream_configuration_mode { * android.lens.opticalStabilizationMode (if it is supported) * android.scaler.cropRegion * android.statistics.faceDetectMode (if it is supported) + * 6. To reduce the amount of data passed across process boundaries at + * high frame rate, within one batch, camera framework only propagates + * the last shutter notify and the last capture results (including partial + * results and final result) to the app. The shutter notifies and capture + * results for the other requests in the batch are derived by + * the camera framework. As a result, the HAL can return empty metadata + * except for the last result in the batch. * * For more details about high speed stream requirements, see * android.control.availableHighSpeedVideoConfigurations and CONSTRAINED_HIGH_SPEED_VIDEO @@ -1578,6 +1631,13 @@ typedef struct camera3_stream { * value of this is 0. * For all streams passed via configure_streams(), the HAL must write * over this field with its usage flags. + * + * From Android O, the usage flag for an output stream may be bitwise + * combination of usage flags for multiple consumers, for the purpose of + * sharing one camera stream between those consumers. The HAL must fail + * configure_streams call with -EINVAL if the combined flags cannot be + * supported due to imcompatible buffer format, dataSpace, or other hardware + * limitations. */ uint32_t usage; @@ -1612,11 +1672,19 @@ typedef struct camera3_stream { * be HAL_DATASPACE_UNKNOWN, and the appropriate color space, etc, should * be determined from the usage flags and the format. * - * >= CAMERA_DEVICE_API_VERSION_3_3: + * = CAMERA_DEVICE_API_VERSION_3_3: * * Always set by the camera service. HAL must use this dataSpace to * configure the stream to the correct colorspace, or to select between - * color and depth outputs if supported. + * color and depth outputs if supported. The dataspace values are the + * legacy definitions in graphics.h + * + * >= CAMERA_DEVICE_API_VERSION_3_4: + * + * Always set by the camera service. HAL must use this dataSpace to + * configure the stream to the correct colorspace, or to select between + * color and depth outputs if supported. The dataspace values are set + * using the V0 dataspace definitions in graphics.h */ android_dataspace_t data_space; @@ -1647,6 +1715,29 @@ typedef struct camera3_stream { int rotation; /** + * The physical camera id this stream belongs to. + * + * <= CAMERA_DEVICE_API_VERISON_3_4: + * + * Not defined and must not be accessed. + * + * >= CAMERA_DEVICE_API_VERISON_3_5: + * + * Always set by camera service. If the camera device is not a logical + * multi camera, or if the camera is a logical multi camera but the stream + * is not a physical output stream, this field will point to a 0-length + * string. + * + * A logical multi camera is a camera device backed by multiple physical + * cameras that are also exposed to the application. And for a logical + * multi camera, a physical output stream is an output stream specifically + * requested on an underlying physical camera. + * + * For an input stream, this field is guaranteed to be a 0-length string. + */ + const char* physical_camera_id; + + /** * This should be one of the camera3_stream_rotation_t values except for * CAMERA3_STREAM_ROTATION_180. * When setting to CAMERA3_STREAM_ROTATION_90 or CAMERA3_STREAM_ROTATION_270, HAL would crop, @@ -1663,7 +1754,7 @@ typedef struct camera3_stream { int crop_rotate_scale_degrees; /* reserved for future use */ - void *reserved[6]; + void *reserved[5]; } camera3_stream_t; @@ -1697,16 +1788,30 @@ typedef struct camera3_stream_configuration { /** * >= CAMERA_DEVICE_API_VERSION_3_3: * - * The operation mode of streams in this configuration, one of the value defined in - * camera3_stream_configuration_mode_t. - * The HAL can use this mode as an indicator to set the stream property (e.g., - * camera3_stream->max_buffers) appropriately. For example, if the configuration is - * CAMERA3_STREAM_CONFIGURATION_CONSTRAINED_HIGH_SPEED_MODE, the HAL may want to set aside more - * buffers for batch mode operation (see android.control.availableHighSpeedVideoConfigurations - * for batch mode definition). + * The operation mode of streams in this configuration, one of the value + * defined in camera3_stream_configuration_mode_t. The HAL can use this + * mode as an indicator to set the stream property (e.g., + * camera3_stream->max_buffers) appropriately. For example, if the + * configuration is + * CAMERA3_STREAM_CONFIGURATION_CONSTRAINED_HIGH_SPEED_MODE, the HAL may + * want to set aside more buffers for batch mode operation (see + * android.control.availableHighSpeedVideoConfigurations for batch mode + * definition). * */ uint32_t operation_mode; + + /** + * >= CAMERA_DEVICE_API_VERSION_3_5: + * + * The session metadata buffer contains the initial values of + * ANDROID_REQUEST_AVAILABLE_SESSION_KEYS. This field is optional + * and camera clients can choose to ignore it, in which case it will + * be set to NULL. If parameters are present, then Hal should examine + * the parameter values and configure its internal camera pipeline + * accordingly. + */ + const camera_metadata_t *session_parameters; } camera3_stream_configuration_t; /** @@ -1950,7 +2055,7 @@ typedef enum camera3_error_msg_code { * available. Subsequent requests are unaffected, and the device remains * operational. The frame_number field specifies the request for which the * buffer was dropped, and error_stream contains a pointer to the stream - * that dropped the frame.u + * that dropped the frame. */ CAMERA3_MSG_ERROR_BUFFER = 4, @@ -2190,6 +2295,44 @@ typedef struct camera3_capture_request { */ const camera3_stream_buffer_t *output_buffers; + /** + * <= CAMERA_DEVICE_API_VERISON_3_4: + * + * Not defined and must not be accessed. + * + * >= CAMERA_DEVICE_API_VERSION_3_5: + * The number of physical camera settings to be applied. If 'num_physcam_settings' + * equals 0 or a physical device is not included, then Hal must decide the + * specific physical device settings based on the default 'settings'. + */ + uint32_t num_physcam_settings; + + /** + * <= CAMERA_DEVICE_API_VERISON_3_4: + * + * Not defined and must not be accessed. + * + * >= CAMERA_DEVICE_API_VERSION_3_5: + * The physical camera ids. The array will contain 'num_physcam_settings' + * camera id strings for all physical devices that have specific settings. + * In case some id is invalid, the process capture request must fail and return + * -EINVAL. + */ + const char **physcam_id; + + /** + * <= CAMERA_DEVICE_API_VERISON_3_4: + * + * Not defined and must not be accessed. + * + * >= CAMERA_DEVICE_API_VERSION_3_5: + * The capture settings for the physical cameras. The array will contain + * 'num_physcam_settings' settings for invididual physical devices. In + * case the settings at some particular index are empty, the process capture + * request must fail and return -EINVAL. + */ + const camera_metadata_t **physcam_settings; + } camera3_capture_request_t; /** @@ -2367,6 +2510,37 @@ typedef struct camera3_capture_result { */ uint32_t partial_result; + /** + * >= CAMERA_DEVICE_API_VERSION_3_5: + * + * Specifies the number of physical camera metadata this capture result + * contains. It must be equal to the number of physical cameras being + * requested from. + * + * If the current camera device is not a logical multi-camera, or the + * corresponding capture_request doesn't request on any physical camera, + * this field must be 0. + */ + uint32_t num_physcam_metadata; + + /** + * >= CAMERA_DEVICE_API_VERSION_3_5: + * + * An array of strings containing the physical camera ids for the returned + * physical camera metadata. The length of the array is + * num_physcam_metadata. + */ + const char **physcam_ids; + + /** + * >= CAMERA_DEVICE_API_VERSION_3_5: + * + * The array of physical camera metadata for the physical cameras being + * requested upon. This array should have a 1-to-1 mapping with the + * physcam_ids. The length of the array is num_physcam_metadata. + */ + const camera_metadata_t **physcam_metadata; + } camera3_capture_result_t; /********************************************************************** @@ -2899,7 +3073,8 @@ typedef struct camera3_device_ops { * 0: On a successful start to processing the capture request * * -EINVAL: If the input is malformed (the settings are NULL when not - * allowed, there are 0 output buffers, etc) and capture processing + * allowed, invalid physical camera settings, + * there are 0 output buffers, etc) and capture processing * cannot start. Failures during request processing should be * handled by calling camera3_callback_ops_t.notify(). In case of * this error, the framework will retain responsibility for the diff --git a/include/android/hardware/libhardware/include/hardware/camera_common.h b/include/android/hardware/libhardware/include/hardware/camera_common.h index 26df0698..5c9bc06f 100644 --- a/include/android/hardware/libhardware/include/hardware/camera_common.h +++ b/include/android/hardware/libhardware/include/hardware/camera_common.h @@ -141,17 +141,19 @@ __BEGIN_DECLS * All device versions <= HARDWARE_DEVICE_API_VERSION(1, 0xFF) must be treated * as CAMERA_DEVICE_API_VERSION_1_0 */ -#define CAMERA_DEVICE_API_VERSION_1_0 HARDWARE_DEVICE_API_VERSION(1, 0) -#define CAMERA_DEVICE_API_VERSION_2_0 HARDWARE_DEVICE_API_VERSION(2, 0) -#define CAMERA_DEVICE_API_VERSION_2_1 HARDWARE_DEVICE_API_VERSION(2, 1) -#define CAMERA_DEVICE_API_VERSION_3_0 HARDWARE_DEVICE_API_VERSION(3, 0) -#define CAMERA_DEVICE_API_VERSION_3_1 HARDWARE_DEVICE_API_VERSION(3, 1) +#define CAMERA_DEVICE_API_VERSION_1_0 HARDWARE_DEVICE_API_VERSION(1, 0) // DEPRECATED +#define CAMERA_DEVICE_API_VERSION_2_0 HARDWARE_DEVICE_API_VERSION(2, 0) // NO LONGER SUPPORTED +#define CAMERA_DEVICE_API_VERSION_2_1 HARDWARE_DEVICE_API_VERSION(2, 1) // NO LONGER SUPPORTED +#define CAMERA_DEVICE_API_VERSION_3_0 HARDWARE_DEVICE_API_VERSION(3, 0) // NO LONGER SUPPORTED +#define CAMERA_DEVICE_API_VERSION_3_1 HARDWARE_DEVICE_API_VERSION(3, 1) // NO LONGER SUPPORTED #define CAMERA_DEVICE_API_VERSION_3_2 HARDWARE_DEVICE_API_VERSION(3, 2) #define CAMERA_DEVICE_API_VERSION_3_3 HARDWARE_DEVICE_API_VERSION(3, 3) +#define CAMERA_DEVICE_API_VERSION_3_4 HARDWARE_DEVICE_API_VERSION(3, 4) +#define CAMERA_DEVICE_API_VERSION_3_5 HARDWARE_DEVICE_API_VERSION(3, 5) -// Device version 3.3 is current, older HAL camera device versions are not +// Device version 3.5 is current, older HAL camera device versions are not // recommended for new devices. -#define CAMERA_DEVICE_API_VERSION_CURRENT CAMERA_DEVICE_API_VERSION_3_3 +#define CAMERA_DEVICE_API_VERSION_CURRENT CAMERA_DEVICE_API_VERSION_3_5 /** * Defined in /system/media/camera/include/system/camera_metadata.h diff --git a/include/android/hardware/libhardware/include/hardware/fb.h b/include/android/hardware/libhardware/include/hardware/fb.h index 9ea9a6e6..2d9153ae 100644 --- a/include/android/hardware/libhardware/include/hardware/fb.h +++ b/include/android/hardware/libhardware/include/hardware/fb.h @@ -161,7 +161,7 @@ typedef struct framebuffer_device_t { static inline int framebuffer_open(const struct hw_module_t* module, struct framebuffer_device_t** device) { return module->methods->open(module, - GRALLOC_HARDWARE_FB0, (struct hw_device_t**)device); + GRALLOC_HARDWARE_FB0, TO_HW_DEVICE_T_OPEN(device)); } static inline int framebuffer_close(struct framebuffer_device_t* device) { diff --git a/include/android/hardware/libhardware/include/hardware/gralloc.h b/include/android/hardware/libhardware/include/hardware/gralloc.h index 80da4cb8..01a76727 100644 --- a/include/android/hardware/libhardware/include/hardware/gralloc.h +++ b/include/android/hardware/libhardware/include/hardware/gralloc.h @@ -19,9 +19,8 @@ #ifndef ANDROID_GRALLOC_INTERFACE_H #define ANDROID_GRALLOC_INTERFACE_H -#include <system/window.h> -#include <system/graphics.h> #include <hardware/hardware.h> +#include <system/graphics.h> #include <stdint.h> #include <sys/cdefs.h> @@ -29,8 +28,8 @@ #include <cutils/native_handle.h> -#include <hardware/hardware.h> #include <hardware/fb.h> +#include <hardware/hardware.h> __BEGIN_DECLS @@ -69,69 +68,69 @@ __BEGIN_DECLS enum { /* buffer is never read in software */ - GRALLOC_USAGE_SW_READ_NEVER = 0x00000000, + GRALLOC_USAGE_SW_READ_NEVER = 0x00000000U, /* buffer is rarely read in software */ - GRALLOC_USAGE_SW_READ_RARELY = 0x00000002, + GRALLOC_USAGE_SW_READ_RARELY = 0x00000002U, /* buffer is often read in software */ - GRALLOC_USAGE_SW_READ_OFTEN = 0x00000003, + GRALLOC_USAGE_SW_READ_OFTEN = 0x00000003U, /* mask for the software read values */ - GRALLOC_USAGE_SW_READ_MASK = 0x0000000F, + GRALLOC_USAGE_SW_READ_MASK = 0x0000000FU, /* buffer is never written in software */ - GRALLOC_USAGE_SW_WRITE_NEVER = 0x00000000, + GRALLOC_USAGE_SW_WRITE_NEVER = 0x00000000U, /* buffer is rarely written in software */ - GRALLOC_USAGE_SW_WRITE_RARELY = 0x00000020, + GRALLOC_USAGE_SW_WRITE_RARELY = 0x00000020U, /* buffer is often written in software */ - GRALLOC_USAGE_SW_WRITE_OFTEN = 0x00000030, + GRALLOC_USAGE_SW_WRITE_OFTEN = 0x00000030U, /* mask for the software write values */ - GRALLOC_USAGE_SW_WRITE_MASK = 0x000000F0, + GRALLOC_USAGE_SW_WRITE_MASK = 0x000000F0U, /* buffer will be used as an OpenGL ES texture */ - GRALLOC_USAGE_HW_TEXTURE = 0x00000100, + GRALLOC_USAGE_HW_TEXTURE = 0x00000100U, /* buffer will be used as an OpenGL ES render target */ - GRALLOC_USAGE_HW_RENDER = 0x00000200, + GRALLOC_USAGE_HW_RENDER = 0x00000200U, /* buffer will be used by the 2D hardware blitter */ - GRALLOC_USAGE_HW_2D = 0x00000400, + GRALLOC_USAGE_HW_2D = 0x00000400U, /* buffer will be used by the HWComposer HAL module */ - GRALLOC_USAGE_HW_COMPOSER = 0x00000800, + GRALLOC_USAGE_HW_COMPOSER = 0x00000800U, /* buffer will be used with the framebuffer device */ - GRALLOC_USAGE_HW_FB = 0x00001000, + GRALLOC_USAGE_HW_FB = 0x00001000U, /* buffer should be displayed full-screen on an external display when * possible */ - GRALLOC_USAGE_EXTERNAL_DISP = 0x00002000, + GRALLOC_USAGE_EXTERNAL_DISP = 0x00002000U, /* Must have a hardware-protected path to external display sink for * this buffer. If a hardware-protected path is not available, then * either don't composite only this buffer (preferred) to the * external sink, or (less desirable) do not route the entire * composition to the external sink. */ - GRALLOC_USAGE_PROTECTED = 0x00004000, + GRALLOC_USAGE_PROTECTED = 0x00004000U, /* buffer may be used as a cursor */ - GRALLOC_USAGE_CURSOR = 0x00008000, + GRALLOC_USAGE_CURSOR = 0x00008000U, /* buffer will be used with the HW video encoder */ - GRALLOC_USAGE_HW_VIDEO_ENCODER = 0x00010000, + GRALLOC_USAGE_HW_VIDEO_ENCODER = 0x00010000U, /* buffer will be written by the HW camera pipeline */ - GRALLOC_USAGE_HW_CAMERA_WRITE = 0x00020000, + GRALLOC_USAGE_HW_CAMERA_WRITE = 0x00020000U, /* buffer will be read by the HW camera pipeline */ - GRALLOC_USAGE_HW_CAMERA_READ = 0x00040000, + GRALLOC_USAGE_HW_CAMERA_READ = 0x00040000U, /* buffer will be used as part of zero-shutter-lag queue */ - GRALLOC_USAGE_HW_CAMERA_ZSL = 0x00060000, + GRALLOC_USAGE_HW_CAMERA_ZSL = 0x00060000U, /* mask for the camera access values */ - GRALLOC_USAGE_HW_CAMERA_MASK = 0x00060000, + GRALLOC_USAGE_HW_CAMERA_MASK = 0x00060000U, /* mask for the software usage bit-mask */ - GRALLOC_USAGE_HW_MASK = 0x00071F00, + GRALLOC_USAGE_HW_MASK = 0x00071F00U, /* buffer will be used as a RenderScript Allocation */ - GRALLOC_USAGE_RENDERSCRIPT = 0x00100000, + GRALLOC_USAGE_RENDERSCRIPT = 0x00100000U, /* Set by the consumer to indicate to the producer that they may attach a * buffer that they did not detach from the BufferQueue. Will be filtered * out by GRALLOC_USAGE_ALLOC_MASK, so gralloc modules will not need to * handle this flag. */ - GRALLOC_USAGE_FOREIGN_BUFFERS = 0x00200000, + GRALLOC_USAGE_FOREIGN_BUFFERS = 0x00200000U, /* Mask of all flags which could be passed to a gralloc module for buffer * allocation. Any flags not in this mask do not need to be handled by @@ -139,11 +138,11 @@ enum { GRALLOC_USAGE_ALLOC_MASK = ~(GRALLOC_USAGE_FOREIGN_BUFFERS), /* implementation-specific private usage flags */ - GRALLOC_USAGE_PRIVATE_0 = 0x10000000, - GRALLOC_USAGE_PRIVATE_1 = 0x20000000, - GRALLOC_USAGE_PRIVATE_2 = 0x40000000, - GRALLOC_USAGE_PRIVATE_3 = 0x80000000, - GRALLOC_USAGE_PRIVATE_MASK = 0xF0000000, + GRALLOC_USAGE_PRIVATE_0 = 0x10000000U, + GRALLOC_USAGE_PRIVATE_1 = 0x20000000U, + GRALLOC_USAGE_PRIVATE_2 = 0x40000000U, + GRALLOC_USAGE_PRIVATE_3 = 0x80000000U, + GRALLOC_USAGE_PRIVATE_MASK = 0xF0000000U, }; /*****************************************************************************/ @@ -373,13 +372,45 @@ typedef struct alloc_device_t { static inline int gralloc_open(const struct hw_module_t* module, struct alloc_device_t** device) { return module->methods->open(module, - GRALLOC_HARDWARE_GPU0, (struct hw_device_t**)device); + GRALLOC_HARDWARE_GPU0, TO_HW_DEVICE_T_OPEN(device)); } static inline int gralloc_close(struct alloc_device_t* device) { return device->common.close(&device->common); } +/** + * map_usage_to_memtrack should be called after allocating a gralloc buffer. + * + * @param usage - it is the flag used when alloc function is called. + * + * This function maps the gralloc usage flags to appropriate memtrack bucket. + * GrallocHAL implementers and users should make an additional ION_IOCTL_TAG + * call using the memtrack tag returned by this function. This will help the + * in-kernel memtack to categorize the memory allocated by different processes + * according to their usage. + * + */ +static inline const char* map_usage_to_memtrack(uint32_t usage) { + usage &= GRALLOC_USAGE_ALLOC_MASK; + + if ((usage & GRALLOC_USAGE_HW_CAMERA_WRITE) != 0) { + return "camera"; + } else if ((usage & GRALLOC_USAGE_HW_VIDEO_ENCODER) != 0 || + (usage & GRALLOC_USAGE_EXTERNAL_DISP) != 0) { + return "video"; + } else if ((usage & GRALLOC_USAGE_HW_RENDER) != 0 || + (usage & GRALLOC_USAGE_HW_TEXTURE) != 0) { + return "gl"; + } else if ((usage & GRALLOC_USAGE_HW_CAMERA_READ) != 0) { + return "camera"; + } else if ((usage & GRALLOC_USAGE_SW_READ_MASK) != 0 || + (usage & GRALLOC_USAGE_SW_WRITE_MASK) != 0) { + return "cpu"; + } + return "graphics"; +} + __END_DECLS #endif // ANDROID_GRALLOC_INTERFACE_H diff --git a/include/android/hardware/libhardware/include/hardware/hardware.h b/include/android/hardware/libhardware/include/hardware/hardware.h index 10b73df7..8919f120 100644 --- a/include/android/hardware/libhardware/include/hardware/hardware.h +++ b/include/android/hardware/libhardware/include/hardware/hardware.h @@ -202,6 +202,12 @@ typedef struct hw_device_t { } hw_device_t; +#ifdef __cplusplus +#define TO_HW_DEVICE_T_OPEN(x) reinterpret_cast<struct hw_device_t**>(x) +#else +#define TO_HW_DEVICE_T_OPEN(x) (struct hw_device_t**)(x) +#endif + /** * Name of the hal_module_info */ diff --git a/include/android/system/core/include/cutils/native_handle.h b/include/android/system/core/include/cutils/native_handle.h index edd7888f..dbd37672 100644 --- a/include/android/system/core/include/cutils/native_handle.h +++ b/include/android/system/core/include/cutils/native_handle.h @@ -18,18 +18,37 @@ #ifndef NATIVE_HANDLE_H_ #define NATIVE_HANDLE_H_ +#include <stdalign.h> + #ifdef __cplusplus extern "C" { #endif +#define NATIVE_HANDLE_MAX_FDS 1024 +#define NATIVE_HANDLE_MAX_INTS 1024 + +/* Declare a char array for use with native_handle_init */ +#define NATIVE_HANDLE_DECLARE_STORAGE(name, maxFds, maxInts) \ + alignas(native_handle_t) char (name)[ \ + sizeof(native_handle_t) + sizeof(int) * ((maxFds) + (maxInts))] + typedef struct native_handle { int version; /* sizeof(native_handle_t) */ int numFds; /* number of file-descriptors at &data[0] */ int numInts; /* number of ints at &data[numFds] */ +#if defined(__clang__) +#pragma clang diagnostic push +#pragma clang diagnostic ignored "-Wzero-length-array" +#endif int data[0]; /* numFds + numInts ints */ +#if defined(__clang__) +#pragma clang diagnostic pop +#endif } native_handle_t; +typedef const native_handle_t* buffer_handle_t; + /* * native_handle_close * @@ -40,6 +59,14 @@ typedef struct native_handle */ int native_handle_close(const native_handle_t* h); +/* + * native_handle_init + * + * Initializes a native_handle_t from storage. storage must be declared with + * NATIVE_HANDLE_DECLARE_STORAGE. numFds and numInts must not respectively + * exceed maxFds and maxInts used to declare the storage. + */ +native_handle_t* native_handle_init(char* storage, int numFds, int numInts); /* * native_handle_create @@ -51,6 +78,15 @@ int native_handle_close(const native_handle_t* h); native_handle_t* native_handle_create(int numFds, int numInts); /* + * native_handle_clone + * + * creates a native_handle_t and initializes it from another native_handle_t. + * Must be destroyed with native_handle_delete(). + * + */ +native_handle_t* native_handle_clone(const native_handle_t* handle); + +/* * native_handle_delete * * frees a native_handle_t allocated with native_handle_create(). diff --git a/include/android/system/core/include/system/camera.h b/include/android/system/core/include/system/camera.h index a1b68d05..9d69588f 100644 --- a/include/android/system/core/include/system/camera.h +++ b/include/android/system/core/include/system/camera.h @@ -204,6 +204,15 @@ enum { * (except disconnect and sending CAMERA_CMD_PING) after getting this. */ CAMERA_ERROR_RELEASED = 2, + + /** + * Camera was released because device policy change or the client application + * is going to background. The client should call Camera::disconnect + * immediately after getting this notification. Otherwise, the camera will be + * released by camera service in a short time. The client should not call any + * method (except disconnect and sending CAMERA_CMD_PING) after getting this. + */ + CAMERA_ERROR_DISABLED = 3, CAMERA_ERROR_SERVER_DIED = 100 }; diff --git a/include/android/system/core/include/system/graphics-base-v1.0.h b/include/android/system/core/include/system/graphics-base-v1.0.h new file mode 100644 index 00000000..44913cc6 --- /dev/null +++ b/include/android/system/core/include/system/graphics-base-v1.0.h @@ -0,0 +1,140 @@ +// This file is autogenerated by hidl-gen. Do not edit manually. +// Source: android.hardware.graphics.common@1.0 +// Location: hardware/interfaces/graphics/common/1.0/ + +#ifndef HIDL_GENERATED_ANDROID_HARDWARE_GRAPHICS_COMMON_V1_0_EXPORTED_CONSTANTS_H_ +#define HIDL_GENERATED_ANDROID_HARDWARE_GRAPHICS_COMMON_V1_0_EXPORTED_CONSTANTS_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + HAL_PIXEL_FORMAT_RGBA_8888 = 1, + HAL_PIXEL_FORMAT_RGBX_8888 = 2, + HAL_PIXEL_FORMAT_RGB_888 = 3, + HAL_PIXEL_FORMAT_RGB_565 = 4, + HAL_PIXEL_FORMAT_BGRA_8888 = 5, + HAL_PIXEL_FORMAT_YCBCR_422_SP = 16, + HAL_PIXEL_FORMAT_YCRCB_420_SP = 17, + HAL_PIXEL_FORMAT_YCBCR_422_I = 20, + HAL_PIXEL_FORMAT_RGBA_FP16 = 22, + HAL_PIXEL_FORMAT_RAW16 = 32, + HAL_PIXEL_FORMAT_BLOB = 33, + HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED = 34, + HAL_PIXEL_FORMAT_YCBCR_420_888 = 35, + HAL_PIXEL_FORMAT_RAW_OPAQUE = 36, + HAL_PIXEL_FORMAT_RAW10 = 37, + HAL_PIXEL_FORMAT_RAW12 = 38, + HAL_PIXEL_FORMAT_RGBA_1010102 = 43, + HAL_PIXEL_FORMAT_Y8 = 538982489, + HAL_PIXEL_FORMAT_Y16 = 540422489, + HAL_PIXEL_FORMAT_YV12 = 842094169, +} android_pixel_format_t; + +typedef enum { + HAL_TRANSFORM_FLIP_H = 1, // (1 << 0) + HAL_TRANSFORM_FLIP_V = 2, // (1 << 1) + HAL_TRANSFORM_ROT_90 = 4, // (1 << 2) + HAL_TRANSFORM_ROT_180 = 3, // (FLIP_H | FLIP_V) + HAL_TRANSFORM_ROT_270 = 7, // ((FLIP_H | FLIP_V) | ROT_90) +} android_transform_t; + +typedef enum { + HAL_DATASPACE_UNKNOWN = 0, + HAL_DATASPACE_ARBITRARY = 1, + HAL_DATASPACE_STANDARD_SHIFT = 16, + HAL_DATASPACE_STANDARD_MASK = 4128768, // (63 << STANDARD_SHIFT) + HAL_DATASPACE_STANDARD_UNSPECIFIED = 0, // (0 << STANDARD_SHIFT) + HAL_DATASPACE_STANDARD_BT709 = 65536, // (1 << STANDARD_SHIFT) + HAL_DATASPACE_STANDARD_BT601_625 = 131072, // (2 << STANDARD_SHIFT) + HAL_DATASPACE_STANDARD_BT601_625_UNADJUSTED = 196608, // (3 << STANDARD_SHIFT) + HAL_DATASPACE_STANDARD_BT601_525 = 262144, // (4 << STANDARD_SHIFT) + HAL_DATASPACE_STANDARD_BT601_525_UNADJUSTED = 327680, // (5 << STANDARD_SHIFT) + HAL_DATASPACE_STANDARD_BT2020 = 393216, // (6 << STANDARD_SHIFT) + HAL_DATASPACE_STANDARD_BT2020_CONSTANT_LUMINANCE = 458752, // (7 << STANDARD_SHIFT) + HAL_DATASPACE_STANDARD_BT470M = 524288, // (8 << STANDARD_SHIFT) + HAL_DATASPACE_STANDARD_FILM = 589824, // (9 << STANDARD_SHIFT) + HAL_DATASPACE_STANDARD_DCI_P3 = 655360, // (10 << STANDARD_SHIFT) + HAL_DATASPACE_STANDARD_ADOBE_RGB = 720896, // (11 << STANDARD_SHIFT) + HAL_DATASPACE_TRANSFER_SHIFT = 22, + HAL_DATASPACE_TRANSFER_MASK = 130023424, // (31 << TRANSFER_SHIFT) + HAL_DATASPACE_TRANSFER_UNSPECIFIED = 0, // (0 << TRANSFER_SHIFT) + HAL_DATASPACE_TRANSFER_LINEAR = 4194304, // (1 << TRANSFER_SHIFT) + HAL_DATASPACE_TRANSFER_SRGB = 8388608, // (2 << TRANSFER_SHIFT) + HAL_DATASPACE_TRANSFER_SMPTE_170M = 12582912, // (3 << TRANSFER_SHIFT) + HAL_DATASPACE_TRANSFER_GAMMA2_2 = 16777216, // (4 << TRANSFER_SHIFT) + HAL_DATASPACE_TRANSFER_GAMMA2_6 = 20971520, // (5 << TRANSFER_SHIFT) + HAL_DATASPACE_TRANSFER_GAMMA2_8 = 25165824, // (6 << TRANSFER_SHIFT) + HAL_DATASPACE_TRANSFER_ST2084 = 29360128, // (7 << TRANSFER_SHIFT) + HAL_DATASPACE_TRANSFER_HLG = 33554432, // (8 << TRANSFER_SHIFT) + HAL_DATASPACE_RANGE_SHIFT = 27, + HAL_DATASPACE_RANGE_MASK = 939524096, // (7 << RANGE_SHIFT) + HAL_DATASPACE_RANGE_UNSPECIFIED = 0, // (0 << RANGE_SHIFT) + HAL_DATASPACE_RANGE_FULL = 134217728, // (1 << RANGE_SHIFT) + HAL_DATASPACE_RANGE_LIMITED = 268435456, // (2 << RANGE_SHIFT) + HAL_DATASPACE_RANGE_EXTENDED = 402653184, // (3 << RANGE_SHIFT) + HAL_DATASPACE_SRGB_LINEAR = 512, + HAL_DATASPACE_V0_SRGB_LINEAR = 138477568, // ((STANDARD_BT709 | TRANSFER_LINEAR) | RANGE_FULL) + HAL_DATASPACE_V0_SCRGB_LINEAR = + 406913024, // ((STANDARD_BT709 | TRANSFER_LINEAR) | RANGE_EXTENDED) + HAL_DATASPACE_SRGB = 513, + HAL_DATASPACE_V0_SRGB = 142671872, // ((STANDARD_BT709 | TRANSFER_SRGB) | RANGE_FULL) + HAL_DATASPACE_V0_SCRGB = 411107328, // ((STANDARD_BT709 | TRANSFER_SRGB) | RANGE_EXTENDED) + HAL_DATASPACE_JFIF = 257, + HAL_DATASPACE_V0_JFIF = 146931712, // ((STANDARD_BT601_625 | TRANSFER_SMPTE_170M) | RANGE_FULL) + HAL_DATASPACE_BT601_625 = 258, + HAL_DATASPACE_V0_BT601_625 = + 281149440, // ((STANDARD_BT601_625 | TRANSFER_SMPTE_170M) | RANGE_LIMITED) + HAL_DATASPACE_BT601_525 = 259, + HAL_DATASPACE_V0_BT601_525 = + 281280512, // ((STANDARD_BT601_525 | TRANSFER_SMPTE_170M) | RANGE_LIMITED) + HAL_DATASPACE_BT709 = 260, + HAL_DATASPACE_V0_BT709 = 281083904, // ((STANDARD_BT709 | TRANSFER_SMPTE_170M) | RANGE_LIMITED) + HAL_DATASPACE_DCI_P3_LINEAR = 139067392, // ((STANDARD_DCI_P3 | TRANSFER_LINEAR) | RANGE_FULL) + HAL_DATASPACE_DCI_P3 = 155844608, // ((STANDARD_DCI_P3 | TRANSFER_GAMMA2_6) | RANGE_FULL) + HAL_DATASPACE_DISPLAY_P3_LINEAR = + 139067392, // ((STANDARD_DCI_P3 | TRANSFER_LINEAR) | RANGE_FULL) + HAL_DATASPACE_DISPLAY_P3 = 143261696, // ((STANDARD_DCI_P3 | TRANSFER_SRGB) | RANGE_FULL) + HAL_DATASPACE_ADOBE_RGB = 151715840, // ((STANDARD_ADOBE_RGB | TRANSFER_GAMMA2_2) | RANGE_FULL) + HAL_DATASPACE_BT2020_LINEAR = 138805248, // ((STANDARD_BT2020 | TRANSFER_LINEAR) | RANGE_FULL) + HAL_DATASPACE_BT2020 = 147193856, // ((STANDARD_BT2020 | TRANSFER_SMPTE_170M) | RANGE_FULL) + HAL_DATASPACE_BT2020_PQ = 163971072, // ((STANDARD_BT2020 | TRANSFER_ST2084) | RANGE_FULL) + HAL_DATASPACE_DEPTH = 4096, + HAL_DATASPACE_SENSOR = 4097, +} android_dataspace_t; + +typedef enum { + HAL_COLOR_MODE_NATIVE = 0, + HAL_COLOR_MODE_STANDARD_BT601_625 = 1, + HAL_COLOR_MODE_STANDARD_BT601_625_UNADJUSTED = 2, + HAL_COLOR_MODE_STANDARD_BT601_525 = 3, + HAL_COLOR_MODE_STANDARD_BT601_525_UNADJUSTED = 4, + HAL_COLOR_MODE_STANDARD_BT709 = 5, + HAL_COLOR_MODE_DCI_P3 = 6, + HAL_COLOR_MODE_SRGB = 7, + HAL_COLOR_MODE_ADOBE_RGB = 8, + HAL_COLOR_MODE_DISPLAY_P3 = 9, +} android_color_mode_t; + +typedef enum { + HAL_COLOR_TRANSFORM_IDENTITY = 0, + HAL_COLOR_TRANSFORM_ARBITRARY_MATRIX = 1, + HAL_COLOR_TRANSFORM_VALUE_INVERSE = 2, + HAL_COLOR_TRANSFORM_GRAYSCALE = 3, + HAL_COLOR_TRANSFORM_CORRECT_PROTANOPIA = 4, + HAL_COLOR_TRANSFORM_CORRECT_DEUTERANOPIA = 5, + HAL_COLOR_TRANSFORM_CORRECT_TRITANOPIA = 6, +} android_color_transform_t; + +typedef enum { + HAL_HDR_DOLBY_VISION = 1, + HAL_HDR_HDR10 = 2, + HAL_HDR_HLG = 3, +} android_hdr_t; + +#ifdef __cplusplus +} +#endif + +#endif // HIDL_GENERATED_ANDROID_HARDWARE_GRAPHICS_COMMON_V1_0_EXPORTED_CONSTANTS_H_ diff --git a/include/android/system/core/include/system/graphics-base-v1.1.h b/include/android/system/core/include/system/graphics-base-v1.1.h new file mode 100644 index 00000000..f95b9ba2 --- /dev/null +++ b/include/android/system/core/include/system/graphics-base-v1.1.h @@ -0,0 +1,48 @@ +// This file is autogenerated by hidl-gen. Do not edit manually. +// Source: android.hardware.graphics.common@1.1 +// Location: hardware/interfaces/graphics/common/1.1/ + +#ifndef HIDL_GENERATED_ANDROID_HARDWARE_GRAPHICS_COMMON_V1_1_EXPORTED_CONSTANTS_H_ +#define HIDL_GENERATED_ANDROID_HARDWARE_GRAPHICS_COMMON_V1_1_EXPORTED_CONSTANTS_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + HAL_PIXEL_FORMAT_DEPTH_16 = 48, + HAL_PIXEL_FORMAT_DEPTH_24 = 49, + HAL_PIXEL_FORMAT_DEPTH_24_STENCIL_8 = 50, + HAL_PIXEL_FORMAT_DEPTH_32F = 51, + HAL_PIXEL_FORMAT_DEPTH_32F_STENCIL_8 = 52, + HAL_PIXEL_FORMAT_STENCIL_8 = 53, + HAL_PIXEL_FORMAT_YCBCR_P010 = 54, +} android_pixel_format_v1_1_t; + +typedef enum { + HAL_DATASPACE_BT2020_ITU = + 281411584, // ((STANDARD_BT2020 | TRANSFER_SMPTE_170M) | RANGE_LIMITED) + HAL_DATASPACE_BT2020_ITU_PQ = + 298188800, // ((STANDARD_BT2020 | TRANSFER_ST2084) | RANGE_LIMITED) + HAL_DATASPACE_BT2020_ITU_HLG = 302383104, // ((STANDARD_BT2020 | TRANSFER_HLG) | RANGE_LIMITED) + HAL_DATASPACE_BT2020_HLG = 168165376, // ((STANDARD_BT2020 | TRANSFER_HLG) | RANGE_FULL) +} android_dataspace_v1_1_t; + +typedef enum { + HAL_COLOR_MODE_BT2020 = 10, + HAL_COLOR_MODE_BT2100_PQ = 11, + HAL_COLOR_MODE_BT2100_HLG = 12, +} android_color_mode_v1_1_t; + +typedef enum { + HAL_RENDER_INTENT_COLORIMETRIC = 0, + HAL_RENDER_INTENT_ENHANCE = 1, + HAL_RENDER_INTENT_TONE_MAP_COLORIMETRIC = 2, + HAL_RENDER_INTENT_TONE_MAP_ENHANCE = 3, +} android_render_intent_v1_1_t; + +#ifdef __cplusplus +} +#endif + +#endif // HIDL_GENERATED_ANDROID_HARDWARE_GRAPHICS_COMMON_V1_1_EXPORTED_CONSTANTS_H_ diff --git a/include/android/system/core/include/system/graphics-base.h b/include/android/system/core/include/system/graphics-base.h new file mode 100644 index 00000000..ea920071 --- /dev/null +++ b/include/android/system/core/include/system/graphics-base.h @@ -0,0 +1,7 @@ +#ifndef SYSTEM_CORE_GRAPHICS_BASE_H_ +#define SYSTEM_CORE_GRAPHICS_BASE_H_ + +#include "graphics-base-v1.0.h" +#include "graphics-base-v1.1.h" + +#endif // SYSTEM_CORE_GRAPHICS_BASE_H_ diff --git a/include/android/system/core/include/system/graphics-sw.h b/include/android/system/core/include/system/graphics-sw.h new file mode 100644 index 00000000..9e1a88e9 --- /dev/null +++ b/include/android/system/core/include/system/graphics-sw.h @@ -0,0 +1,16 @@ +#ifndef SYSTEM_CORE_GRAPHICS_SW_H_ +#define SYSTEM_CORE_GRAPHICS_SW_H_ + +/* Software formats not in the HAL definitions. */ +typedef enum { + HAL_PIXEL_FORMAT_YCBCR_422_888 = 39, // 0x27 + HAL_PIXEL_FORMAT_YCBCR_444_888 = 40, // 0x28 + HAL_PIXEL_FORMAT_FLEX_RGB_888 = 41, // 0x29 + HAL_PIXEL_FORMAT_FLEX_RGBA_8888 = 42, // 0x2A +} android_pixel_format_sw_t; + +/* for compatibility */ +#define HAL_PIXEL_FORMAT_YCbCr_422_888 HAL_PIXEL_FORMAT_YCBCR_422_888 +#define HAL_PIXEL_FORMAT_YCbCr_444_888 HAL_PIXEL_FORMAT_YCBCR_444_888 + +#endif // SYSTEM_CORE_GRAPHICS_SW_H_ diff --git a/include/android/system/core/include/system/graphics.h b/include/android/system/core/include/system/graphics.h index 909ffe68..6341e642 100644 --- a/include/android/system/core/include/system/graphics.h +++ b/include/android/system/core/include/system/graphics.h @@ -18,12 +18,32 @@ #ifndef SYSTEM_CORE_INCLUDE_ANDROID_GRAPHICS_H #define SYSTEM_CORE_INCLUDE_ANDROID_GRAPHICS_H +#include <stddef.h> #include <stdint.h> +/* + * Some of the enums are now defined in HIDL in hardware/interfaces and are + * generated. + */ +#include "graphics-base.h" +#include "graphics-sw.h" + #ifdef __cplusplus extern "C" { #endif +/* for compatibility */ +#define HAL_PIXEL_FORMAT_YCbCr_420_888 HAL_PIXEL_FORMAT_YCBCR_420_888 +#define HAL_PIXEL_FORMAT_YCbCr_422_SP HAL_PIXEL_FORMAT_YCBCR_422_SP +#define HAL_PIXEL_FORMAT_YCrCb_420_SP HAL_PIXEL_FORMAT_YCRCB_420_SP +#define HAL_PIXEL_FORMAT_YCbCr_422_I HAL_PIXEL_FORMAT_YCBCR_422_I +typedef android_pixel_format_t android_pixel_format; +typedef android_transform_t android_transform; +typedef android_dataspace_t android_dataspace; +typedef android_color_mode_t android_color_mode; +typedef android_color_transform_t android_color_transform; +typedef android_hdr_t android_hdr; + /* * If the HAL needs to create service threads to handle graphics related * tasks, these threads need to run at HAL_PRIORITY_URGENT_DISPLAY priority @@ -38,411 +58,6 @@ extern "C" { #define HAL_PRIORITY_URGENT_DISPLAY (-8) -/** - * pixel format definitions - */ - -enum { - /* - * "linear" color pixel formats: - * - * When used with ANativeWindow, the dataSpace field describes the color - * space of the buffer. - * - * The color space determines, for example, if the formats are linear or - * gamma-corrected; or whether any special operations are performed when - * reading or writing into a buffer in one of these formats. - */ - HAL_PIXEL_FORMAT_RGBA_8888 = 1, - HAL_PIXEL_FORMAT_RGBX_8888 = 2, - HAL_PIXEL_FORMAT_RGB_888 = 3, - HAL_PIXEL_FORMAT_RGB_565 = 4, - HAL_PIXEL_FORMAT_BGRA_8888 = 5, - - /* - * 0x100 - 0x1FF - * - * This range is reserved for pixel formats that are specific to the HAL - * implementation. Implementations can use any value in this range to - * communicate video pixel formats between their HAL modules. These formats - * must not have an alpha channel. Additionally, an EGLimage created from a - * gralloc buffer of one of these formats must be supported for use with the - * GL_OES_EGL_image_external OpenGL ES extension. - */ - - /* - * Android YUV format: - * - * This format is exposed outside of the HAL to software decoders and - * applications. EGLImageKHR must support it in conjunction with the - * OES_EGL_image_external extension. - * - * YV12 is a 4:2:0 YCrCb planar format comprised of a WxH Y plane followed - * by (W/2) x (H/2) Cr and Cb planes. - * - * This format assumes - * - an even width - * - an even height - * - a horizontal stride multiple of 16 pixels - * - a vertical stride equal to the height - * - * y_size = stride * height - * c_stride = ALIGN(stride/2, 16) - * c_size = c_stride * height/2 - * size = y_size + c_size * 2 - * cr_offset = y_size - * cb_offset = y_size + c_size - * - * When used with ANativeWindow, the dataSpace field describes the color - * space of the buffer. - */ - HAL_PIXEL_FORMAT_YV12 = 0x32315659, // YCrCb 4:2:0 Planar - - - /* - * Android Y8 format: - * - * This format is exposed outside of the HAL to the framework. - * The expected gralloc usage flags are SW_* and HW_CAMERA_*, - * and no other HW_ flags will be used. - * - * Y8 is a YUV planar format comprised of a WxH Y plane, - * with each pixel being represented by 8 bits. - * - * It is equivalent to just the Y plane from YV12. - * - * This format assumes - * - an even width - * - an even height - * - a horizontal stride multiple of 16 pixels - * - a vertical stride equal to the height - * - * size = stride * height - * - * When used with ANativeWindow, the dataSpace field describes the color - * space of the buffer. - */ - HAL_PIXEL_FORMAT_Y8 = 0x20203859, - - /* - * Android Y16 format: - * - * This format is exposed outside of the HAL to the framework. - * The expected gralloc usage flags are SW_* and HW_CAMERA_*, - * and no other HW_ flags will be used. - * - * Y16 is a YUV planar format comprised of a WxH Y plane, - * with each pixel being represented by 16 bits. - * - * It is just like Y8, but has double the bits per pixel (little endian). - * - * This format assumes - * - an even width - * - an even height - * - a horizontal stride multiple of 16 pixels - * - a vertical stride equal to the height - * - strides are specified in pixels, not in bytes - * - * size = stride * height * 2 - * - * When used with ANativeWindow, the dataSpace field describes the color - * space of the buffer, except that dataSpace field - * HAL_DATASPACE_DEPTH indicates that this buffer contains a depth - * image where each sample is a distance value measured by a depth camera, - * plus an associated confidence value. - */ - HAL_PIXEL_FORMAT_Y16 = 0x20363159, - - /* - * Android RAW sensor format: - * - * This format is exposed outside of the camera HAL to applications. - * - * RAW16 is a single-channel, 16-bit, little endian format, typically - * representing raw Bayer-pattern images from an image sensor, with minimal - * processing. - * - * The exact pixel layout of the data in the buffer is sensor-dependent, and - * needs to be queried from the camera device. - * - * Generally, not all 16 bits are used; more common values are 10 or 12 - * bits. If not all bits are used, the lower-order bits are filled first. - * All parameters to interpret the raw data (black and white points, - * color space, etc) must be queried from the camera device. - * - * This format assumes - * - an even width - * - an even height - * - a horizontal stride multiple of 16 pixels - * - a vertical stride equal to the height - * - strides are specified in pixels, not in bytes - * - * size = stride * height * 2 - * - * This format must be accepted by the gralloc module when used with the - * following usage flags: - * - GRALLOC_USAGE_HW_CAMERA_* - * - GRALLOC_USAGE_SW_* - * - GRALLOC_USAGE_RENDERSCRIPT - * - * When used with ANativeWindow, the dataSpace should be - * HAL_DATASPACE_ARBITRARY, as raw image sensor buffers require substantial - * extra metadata to define. - */ - HAL_PIXEL_FORMAT_RAW16 = 0x20, - - /* - * Android RAW10 format: - * - * This format is exposed outside of the camera HAL to applications. - * - * RAW10 is a single-channel, 10-bit per pixel, densely packed in each row, - * unprocessed format, usually representing raw Bayer-pattern images coming from - * an image sensor. - * - * In an image buffer with this format, starting from the first pixel of each - * row, each 4 consecutive pixels are packed into 5 bytes (40 bits). Each one - * of the first 4 bytes contains the top 8 bits of each pixel, The fifth byte - * contains the 2 least significant bits of the 4 pixels, the exact layout data - * for each 4 consecutive pixels is illustrated below (Pi[j] stands for the jth - * bit of the ith pixel): - * - * bit 7 bit 0 - * =====|=====|=====|=====|=====|=====|=====|=====| - * Byte 0: |P0[9]|P0[8]|P0[7]|P0[6]|P0[5]|P0[4]|P0[3]|P0[2]| - * |-----|-----|-----|-----|-----|-----|-----|-----| - * Byte 1: |P1[9]|P1[8]|P1[7]|P1[6]|P1[5]|P1[4]|P1[3]|P1[2]| - * |-----|-----|-----|-----|-----|-----|-----|-----| - * Byte 2: |P2[9]|P2[8]|P2[7]|P2[6]|P2[5]|P2[4]|P2[3]|P2[2]| - * |-----|-----|-----|-----|-----|-----|-----|-----| - * Byte 3: |P3[9]|P3[8]|P3[7]|P3[6]|P3[5]|P3[4]|P3[3]|P3[2]| - * |-----|-----|-----|-----|-----|-----|-----|-----| - * Byte 4: |P3[1]|P3[0]|P2[1]|P2[0]|P1[1]|P1[0]|P0[1]|P0[0]| - * =============================================== - * - * This format assumes - * - a width multiple of 4 pixels - * - an even height - * - a vertical stride equal to the height - * - strides are specified in bytes, not in pixels - * - * size = stride * height - * - * When stride is equal to width * (10 / 8), there will be no padding bytes at - * the end of each row, the entire image data is densely packed. When stride is - * larger than width * (10 / 8), padding bytes will be present at the end of each - * row (including the last row). - * - * This format must be accepted by the gralloc module when used with the - * following usage flags: - * - GRALLOC_USAGE_HW_CAMERA_* - * - GRALLOC_USAGE_SW_* - * - GRALLOC_USAGE_RENDERSCRIPT - * - * When used with ANativeWindow, the dataSpace field should be - * HAL_DATASPACE_ARBITRARY, as raw image sensor buffers require substantial - * extra metadata to define. - */ - HAL_PIXEL_FORMAT_RAW10 = 0x25, - - /* - * Android RAW12 format: - * - * This format is exposed outside of camera HAL to applications. - * - * RAW12 is a single-channel, 12-bit per pixel, densely packed in each row, - * unprocessed format, usually representing raw Bayer-pattern images coming from - * an image sensor. - * - * In an image buffer with this format, starting from the first pixel of each - * row, each two consecutive pixels are packed into 3 bytes (24 bits). The first - * and second byte contains the top 8 bits of first and second pixel. The third - * byte contains the 4 least significant bits of the two pixels, the exact layout - * data for each two consecutive pixels is illustrated below (Pi[j] stands for - * the jth bit of the ith pixel): - * - * bit 7 bit 0 - * ======|======|======|======|======|======|======|======| - * Byte 0: |P0[11]|P0[10]|P0[ 9]|P0[ 8]|P0[ 7]|P0[ 6]|P0[ 5]|P0[ 4]| - * |------|------|------|------|------|------|------|------| - * Byte 1: |P1[11]|P1[10]|P1[ 9]|P1[ 8]|P1[ 7]|P1[ 6]|P1[ 5]|P1[ 4]| - * |------|------|------|------|------|------|------|------| - * Byte 2: |P1[ 3]|P1[ 2]|P1[ 1]|P1[ 0]|P0[ 3]|P0[ 2]|P0[ 1]|P0[ 0]| - * ======================================================= - * - * This format assumes: - * - a width multiple of 4 pixels - * - an even height - * - a vertical stride equal to the height - * - strides are specified in bytes, not in pixels - * - * size = stride * height - * - * When stride is equal to width * (12 / 8), there will be no padding bytes at - * the end of each row, the entire image data is densely packed. When stride is - * larger than width * (12 / 8), padding bytes will be present at the end of - * each row (including the last row). - * - * This format must be accepted by the gralloc module when used with the - * following usage flags: - * - GRALLOC_USAGE_HW_CAMERA_* - * - GRALLOC_USAGE_SW_* - * - GRALLOC_USAGE_RENDERSCRIPT - * - * When used with ANativeWindow, the dataSpace field should be - * HAL_DATASPACE_ARBITRARY, as raw image sensor buffers require substantial - * extra metadata to define. - */ - HAL_PIXEL_FORMAT_RAW12 = 0x26, - - /* - * Android opaque RAW format: - * - * This format is exposed outside of the camera HAL to applications. - * - * RAW_OPAQUE is a format for unprocessed raw image buffers coming from an - * image sensor. The actual structure of buffers of this format is - * implementation-dependent. - * - * This format must be accepted by the gralloc module when used with the - * following usage flags: - * - GRALLOC_USAGE_HW_CAMERA_* - * - GRALLOC_USAGE_SW_* - * - GRALLOC_USAGE_RENDERSCRIPT - * - * When used with ANativeWindow, the dataSpace field should be - * HAL_DATASPACE_ARBITRARY, as raw image sensor buffers require substantial - * extra metadata to define. - */ - HAL_PIXEL_FORMAT_RAW_OPAQUE = 0x24, - - /* - * Android binary blob graphics buffer format: - * - * This format is used to carry task-specific data which does not have a - * standard image structure. The details of the format are left to the two - * endpoints. - * - * A typical use case is for transporting JPEG-compressed images from the - * Camera HAL to the framework or to applications. - * - * Buffers of this format must have a height of 1, and width equal to their - * size in bytes. - * - * When used with ANativeWindow, the mapping of the dataSpace field to - * buffer contents for BLOB is as follows: - * - * dataSpace value | Buffer contents - * -------------------------------+----------------------------------------- - * HAL_DATASPACE_JFIF | An encoded JPEG image - * HAL_DATASPACE_DEPTH | An android_depth_points buffer - * Other | Unsupported - * - */ - HAL_PIXEL_FORMAT_BLOB = 0x21, - - /* - * Android format indicating that the choice of format is entirely up to the - * device-specific Gralloc implementation. - * - * The Gralloc implementation should examine the usage bits passed in when - * allocating a buffer with this format, and it should derive the pixel - * format from those usage flags. This format will never be used with any - * of the GRALLOC_USAGE_SW_* usage flags. - * - * If a buffer of this format is to be used as an OpenGL ES texture, the - * framework will assume that sampling the texture will always return an - * alpha value of 1.0 (i.e. the buffer contains only opaque pixel values). - * - * When used with ANativeWindow, the dataSpace field describes the color - * space of the buffer. - */ - HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED = 0x22, - - /* - * Android flexible YCbCr 4:2:0 formats - * - * This format allows platforms to use an efficient YCbCr/YCrCb 4:2:0 - * buffer layout, while still describing the general format in a - * layout-independent manner. While called YCbCr, it can be - * used to describe formats with either chromatic ordering, as well as - * whole planar or semiplanar layouts. - * - * struct android_ycbcr (below) is the the struct used to describe it. - * - * This format must be accepted by the gralloc module when - * USAGE_SW_WRITE_* or USAGE_SW_READ_* are set. - * - * This format is locked for use by gralloc's (*lock_ycbcr) method, and - * locking with the (*lock) method will return an error. - * - * When used with ANativeWindow, the dataSpace field describes the color - * space of the buffer. - */ - HAL_PIXEL_FORMAT_YCbCr_420_888 = 0x23, - - /* - * Android flexible YCbCr 4:2:2 formats - * - * This format allows platforms to use an efficient YCbCr/YCrCb 4:2:2 - * buffer layout, while still describing the general format in a - * layout-independent manner. While called YCbCr, it can be - * used to describe formats with either chromatic ordering, as well as - * whole planar or semiplanar layouts. - * - * This format is currently only used by SW readable buffers - * produced by MediaCodecs, so the gralloc module can ignore this format. - */ - HAL_PIXEL_FORMAT_YCbCr_422_888 = 0x27, - - /* - * Android flexible YCbCr 4:4:4 formats - * - * This format allows platforms to use an efficient YCbCr/YCrCb 4:4:4 - * buffer layout, while still describing the general format in a - * layout-independent manner. While called YCbCr, it can be - * used to describe formats with either chromatic ordering, as well as - * whole planar or semiplanar layouts. - * - * This format is currently only used by SW readable buffers - * produced by MediaCodecs, so the gralloc module can ignore this format. - */ - HAL_PIXEL_FORMAT_YCbCr_444_888 = 0x28, - - /* - * Android flexible RGB 888 formats - * - * This format allows platforms to use an efficient RGB/BGR/RGBX/BGRX - * buffer layout, while still describing the general format in a - * layout-independent manner. While called RGB, it can be - * used to describe formats with either color ordering and optional - * padding, as well as whole planar layout. - * - * This format is currently only used by SW readable buffers - * produced by MediaCodecs, so the gralloc module can ignore this format. - */ - HAL_PIXEL_FORMAT_FLEX_RGB_888 = 0x29, - - /* - * Android flexible RGBA 8888 formats - * - * This format allows platforms to use an efficient RGBA/BGRA/ARGB/ABGR - * buffer layout, while still describing the general format in a - * layout-independent manner. While called RGBA, it can be - * used to describe formats with any of the component orderings, as - * well as whole planar layout. - * - * This format is currently only used by SW readable buffers - * produced by MediaCodecs, so the gralloc module can ignore this format. - */ - HAL_PIXEL_FORMAT_FLEX_RGBA_8888 = 0x2A, - - /* Legacy formats (deprecated), used by ImageFormat.java */ - HAL_PIXEL_FORMAT_YCbCr_422_SP = 0x10, // NV16 - HAL_PIXEL_FORMAT_YCrCb_420_SP = 0x11, // NV21 - HAL_PIXEL_FORMAT_YCbCr_422_I = 0x14, // YUY2 -}; - /* * Structure for describing YCbCr formats for consumption by applications. * This is used with HAL_PIXEL_FORMAT_YCbCr_*_888. @@ -452,15 +67,15 @@ enum { * * Buffers must have a 8 bit depth. * - * @y, @cb, and @cr point to the first byte of their respective planes. + * y, cb, and cr point to the first byte of their respective planes. * * Stride describes the distance in bytes from the first value of one row of * the image to the first value of the next row. It includes the width of the * image plus padding. - * @ystride is the stride of the luma plane. - * @cstride is the stride of the chroma planes. + * ystride is the stride of the luma plane. + * cstride is the stride of the chroma planes. * - * @chroma_step is the distance in bytes from one chroma pixel value to the + * chroma_step is the distance in bytes from one chroma pixel value to the * next. This is 2 bytes for semiplanar (because chroma values are interleaved * and each chroma value is one byte) and 1 for planar. */ @@ -477,6 +92,102 @@ struct android_ycbcr { uint32_t reserved[8]; }; +/* + * Structures for describing flexible YUVA/RGBA formats for consumption by + * applications. Such flexible formats contain a plane for each component (e.g. + * red, green, blue), where each plane is laid out in a grid-like pattern + * occupying unique byte addresses and with consistent byte offsets between + * neighboring pixels. + * + * The android_flex_layout structure is used with any pixel format that can be + * represented by it, such as: + * - HAL_PIXEL_FORMAT_YCbCr_*_888 + * - HAL_PIXEL_FORMAT_FLEX_RGB*_888 + * - HAL_PIXEL_FORMAT_RGB[AX]_888[8],BGRA_8888,RGB_888 + * - HAL_PIXEL_FORMAT_YV12,Y8,Y16,YCbCr_422_SP/I,YCrCb_420_SP + * - even implementation defined formats that can be represented by + * the structures + * + * Vertical increment (aka. row increment or stride) describes the distance in + * bytes from the first pixel of one row to the first pixel of the next row + * (below) for the component plane. This can be negative. + * + * Horizontal increment (aka. column or pixel increment) describes the distance + * in bytes from one pixel to the next pixel (to the right) on the same row for + * the component plane. This can be negative. + * + * Each plane can be subsampled either vertically or horizontally by + * a power-of-two factor. + * + * The bit-depth of each component can be arbitrary, as long as the pixels are + * laid out on whole bytes, in native byte-order, using the most significant + * bits of each unit. + */ + +typedef enum android_flex_component { + /* luma */ + FLEX_COMPONENT_Y = 1 << 0, + /* chroma blue */ + FLEX_COMPONENT_Cb = 1 << 1, + /* chroma red */ + FLEX_COMPONENT_Cr = 1 << 2, + + /* red */ + FLEX_COMPONENT_R = 1 << 10, + /* green */ + FLEX_COMPONENT_G = 1 << 11, + /* blue */ + FLEX_COMPONENT_B = 1 << 12, + + /* alpha */ + FLEX_COMPONENT_A = 1 << 30, +} android_flex_component_t; + +typedef struct android_flex_plane { + /* pointer to the first byte of the top-left pixel of the plane. */ + uint8_t *top_left; + + android_flex_component_t component; + + /* bits allocated for the component in each pixel. Must be a positive + multiple of 8. */ + int32_t bits_per_component; + /* number of the most significant bits used in the format for this + component. Must be between 1 and bits_per_component, inclusive. */ + int32_t bits_used; + + /* horizontal increment */ + int32_t h_increment; + /* vertical increment */ + int32_t v_increment; + /* horizontal subsampling. Must be a positive power of 2. */ + int32_t h_subsampling; + /* vertical subsampling. Must be a positive power of 2. */ + int32_t v_subsampling; +} android_flex_plane_t; + +typedef enum android_flex_format { + /* not a flexible format */ + FLEX_FORMAT_INVALID = 0x0, + FLEX_FORMAT_Y = FLEX_COMPONENT_Y, + FLEX_FORMAT_YCbCr = FLEX_COMPONENT_Y | FLEX_COMPONENT_Cb | FLEX_COMPONENT_Cr, + FLEX_FORMAT_YCbCrA = FLEX_FORMAT_YCbCr | FLEX_COMPONENT_A, + FLEX_FORMAT_RGB = FLEX_COMPONENT_R | FLEX_COMPONENT_G | FLEX_COMPONENT_B, + FLEX_FORMAT_RGBA = FLEX_FORMAT_RGB | FLEX_COMPONENT_A, +} android_flex_format_t; + +typedef struct android_flex_layout { + /* the kind of flexible format */ + android_flex_format_t format; + + /* number of planes; 0 for FLEX_FORMAT_INVALID */ + uint32_t num_planes; + /* a plane for each component; ordered in increasing component value order. + E.g. FLEX_FORMAT_RGBA maps 0 -> R, 1 -> G, etc. + Can be NULL for FLEX_FORMAT_INVALID */ + android_flex_plane_t *planes; +} android_flex_layout_t; + /** * Structure used to define depth point clouds for format HAL_PIXEL_FORMAT_BLOB * with dataSpace value of HAL_DATASPACE_DEPTH. @@ -489,9 +200,9 @@ struct android_ycbcr { * measurement is correct. It is between 0.f and 1.f, inclusive, with 1.f == * 100% confidence. * - * @num_points is the number of points in the list + * num_points is the number of points in the list * - * @xyz_points is the flexible array of floating-point values. + * xyz_points is the flexible array of floating-point values. * It contains (num_points) * 4 floats. * * For example: @@ -516,246 +227,40 @@ struct android_depth_points { /** reserved for future use, set to 0 by gralloc's (*lock)() */ uint32_t reserved[8]; +#if defined(__clang__) +#pragma clang diagnostic push +#pragma clang diagnostic ignored "-Wc99-extensions" +#endif float xyzc_points[]; +#if defined(__clang__) +#pragma clang diagnostic pop +#endif }; /** - * Transformation definitions - * - * IMPORTANT NOTE: - * HAL_TRANSFORM_ROT_90 is applied CLOCKWISE and AFTER HAL_TRANSFORM_FLIP_{H|V}. - * - */ - -enum { - /* flip source image horizontally (around the vertical axis) */ - HAL_TRANSFORM_FLIP_H = 0x01, - /* flip source image vertically (around the horizontal axis)*/ - HAL_TRANSFORM_FLIP_V = 0x02, - /* rotate source image 90 degrees clockwise */ - HAL_TRANSFORM_ROT_90 = 0x04, - /* rotate source image 180 degrees */ - HAL_TRANSFORM_ROT_180 = 0x03, - /* rotate source image 270 degrees clockwise */ - HAL_TRANSFORM_ROT_270 = 0x07, - /* don't use. see system/window.h */ - HAL_TRANSFORM_RESERVED = 0x08, + * These structures are used to define the reference display's + * capabilities for HDR content. Display engine can use this + * to better tone map content to user's display. + * Color is defined in CIE XYZ coordinates + */ +struct android_xy_color { + float x; + float y; }; -/** - * Dataspace Definitions - * ====================== - * - * Dataspace is the definition of how pixel values should be interpreted. - * - * For many formats, this is the colorspace of the image data, which includes - * primaries (including white point) and the transfer characteristic function, - * which describes both gamma curve and numeric range (within the bit depth). - * - * Other dataspaces include depth measurement data from a depth camera. - */ - -typedef enum android_dataspace { - /* - * Default-assumption data space, when not explicitly specified. - * - * It is safest to assume the buffer is an image with sRGB primaries and - * encoding ranges, but the consumer and/or the producer of the data may - * simply be using defaults. No automatic gamma transform should be - * expected, except for a possible display gamma transform when drawn to a - * screen. - */ - HAL_DATASPACE_UNKNOWN = 0x0, - - /* - * Arbitrary dataspace with manually defined characteristics. Definition - * for colorspaces or other meaning must be communicated separately. - * - * This is used when specifying primaries, transfer characteristics, - * etc. separately. - * - * A typical use case is in video encoding parameters (e.g. for H.264), - * where a colorspace can have separately defined primaries, transfer - * characteristics, etc. - */ - HAL_DATASPACE_ARBITRARY = 0x1, - - /* - * RGB Colorspaces - * ----------------- - * - * Primaries are given using (x,y) coordinates in the CIE 1931 definition - * of x and y specified by ISO 11664-1. - * - * Transfer characteristics are the opto-electronic transfer characteristic - * at the source as a function of linear optical intensity (luminance). - */ - - /* - * sRGB linear encoding: - * - * The red, green, and blue components are stored in sRGB space, but - * are linear, not gamma-encoded. - * The RGB primaries and the white point are the same as BT.709. - * - * The values are encoded using the full range ([0,255] for 8-bit) for all - * components. - */ - HAL_DATASPACE_SRGB_LINEAR = 0x200, - - /* - * sRGB gamma encoding: - * - * The red, green and blue components are stored in sRGB space, and - * converted to linear space when read, using the standard sRGB to linear - * equation: - * - * Clinear = Csrgb / 12.92 for Csrgb <= 0.04045 - * = (Csrgb + 0.055 / 1.055)^2.4 for Csrgb > 0.04045 - * - * When written the inverse transformation is performed: - * - * Csrgb = 12.92 * Clinear for Clinear <= 0.0031308 - * = 1.055 * Clinear^(1/2.4) - 0.055 for Clinear > 0.0031308 - * - * - * The alpha component, if present, is always stored in linear space and - * is left unmodified when read or written. - * - * The RGB primaries and the white point are the same as BT.709. - * - * The values are encoded using the full range ([0,255] for 8-bit) for all - * components. - * - */ - HAL_DATASPACE_SRGB = 0x201, - - /* - * YCbCr Colorspaces - * ----------------- - * - * Primaries are given using (x,y) coordinates in the CIE 1931 definition - * of x and y specified by ISO 11664-1. - * - * Transfer characteristics are the opto-electronic transfer characteristic - * at the source as a function of linear optical intensity (luminance). - */ - - /* - * JPEG File Interchange Format (JFIF) - * - * Same model as BT.601-625, but all values (Y, Cb, Cr) range from 0 to 255 - * - * Transfer characteristic curve: - * E = 1.099 * L ^ 0.45 - 0.099, 1.00 >= L >= 0.018 - * E = 4.500 L, 0.018 > L >= 0 - * L - luminance of image 0 <= L <= 1 for conventional colorimetry - * E - corresponding electrical signal - * - * Primaries: x y - * green 0.290 0.600 - * blue 0.150 0.060 - * red 0.640 0.330 - * white (D65) 0.3127 0.3290 - */ - HAL_DATASPACE_JFIF = 0x101, - - /* - * ITU-R Recommendation 601 (BT.601) - 625-line - * - * Standard-definition television, 625 Lines (PAL) - * - * For 8-bit-depth formats: - * Luma (Y) samples should range from 16 to 235, inclusive - * Chroma (Cb, Cr) samples should range from 16 to 240, inclusive - * - * For 10-bit-depth formats: - * Luma (Y) samples should range from 64 to 940, inclusive - * Chroma (Cb, Cr) samples should range from 64 to 960, inclusive - * - * Transfer characteristic curve: - * E = 1.099 * L ^ 0.45 - 0.099, 1.00 >= L >= 0.018 - * E = 4.500 L, 0.018 > L >= 0 - * L - luminance of image 0 <= L <= 1 for conventional colorimetry - * E - corresponding electrical signal - * - * Primaries: x y - * green 0.290 0.600 - * blue 0.150 0.060 - * red 0.640 0.330 - * white (D65) 0.3127 0.3290 - */ - HAL_DATASPACE_BT601_625 = 0x102, - - /* - * ITU-R Recommendation 601 (BT.601) - 525-line - * - * Standard-definition television, 525 Lines (NTSC) - * - * For 8-bit-depth formats: - * Luma (Y) samples should range from 16 to 235, inclusive - * Chroma (Cb, Cr) samples should range from 16 to 240, inclusive - * - * For 10-bit-depth formats: - * Luma (Y) samples should range from 64 to 940, inclusive - * Chroma (Cb, Cr) samples should range from 64 to 960, inclusive - * - * Transfer characteristic curve: - * E = 1.099 * L ^ 0.45 - 0.099, 1.00 >= L >= 0.018 - * E = 4.500 L, 0.018 > L >= 0 - * L - luminance of image 0 <= L <= 1 for conventional colorimetry - * E - corresponding electrical signal - * - * Primaries: x y - * green 0.310 0.595 - * blue 0.155 0.070 - * red 0.630 0.340 - * white (D65) 0.3127 0.3290 - */ - HAL_DATASPACE_BT601_525 = 0x103, - - /* - * ITU-R Recommendation 709 (BT.709) - * - * High-definition television - * - * For 8-bit-depth formats: - * Luma (Y) samples should range from 16 to 235, inclusive - * Chroma (Cb, Cr) samples should range from 16 to 240, inclusive - * - * For 10-bit-depth formats: - * Luma (Y) samples should range from 64 to 940, inclusive - * Chroma (Cb, Cr) samples should range from 64 to 960, inclusive - * - * Primaries: x y - * green 0.300 0.600 - * blue 0.150 0.060 - * red 0.640 0.330 - * white (D65) 0.3127 0.3290 - */ - HAL_DATASPACE_BT709 = 0x104, - - /* - * The buffer contains depth ranging measurements from a depth camera. - * This value is valid with formats: - * HAL_PIXEL_FORMAT_Y16: 16-bit samples, consisting of a depth measurement - * and an associated confidence value. The 3 MSBs of the sample make - * up the confidence value, and the low 13 LSBs of the sample make up - * the depth measurement. - * For the confidence section, 0 means 100% confidence, 1 means 0% - * confidence. The mapping to a linear float confidence value between - * 0.f and 1.f can be obtained with - * float confidence = (((depthSample >> 13) - 1) & 0x7) / 7.0f; - * The depth measurement can be extracted simply with - * uint16_t range = (depthSample & 0x1FFF); - * HAL_PIXEL_FORMAT_BLOB: A depth point cloud, as - * a variable-length float (x,y,z, confidence) coordinate point list. - * The point cloud will be represented with the android_depth_points - * structure. - */ - HAL_DATASPACE_DEPTH = 0x1000 +struct android_smpte2086_metadata { + struct android_xy_color displayPrimaryRed; + struct android_xy_color displayPrimaryGreen; + struct android_xy_color displayPrimaryBlue; + struct android_xy_color whitePoint; + float maxLuminance; + float minLuminance; +}; -} android_dataspace_t; +struct android_cta861_3_metadata { + float maxContentLightLevel; + float maxFrameAverageLightLevel; +}; #ifdef __cplusplus } diff --git a/include/android/system/core/include/system/window.h b/include/android/system/core/include/system/window.h deleted file mode 100644 index 2c9d6063..00000000 --- a/include/android/system/core/include/system/window.h +++ /dev/null @@ -1,955 +0,0 @@ -/* SPDX-License-Identifier: Apache-2.0 */ -/* - * Copyright (C) 2011 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef SYSTEM_CORE_INCLUDE_ANDROID_WINDOW_H -#define SYSTEM_CORE_INCLUDE_ANDROID_WINDOW_H - -#include <cutils/native_handle.h> -#include <errno.h> -#include <limits.h> -#include <stdint.h> -#include <string.h> -#include <sys/cdefs.h> -#include <system/graphics.h> -#include <unistd.h> - -#ifndef __UNUSED -#define __UNUSED __attribute__((__unused__)) -#endif -#ifndef __deprecated -#define __deprecated __attribute__((__deprecated__)) -#endif - -__BEGIN_DECLS - -/*****************************************************************************/ - -#define ANDROID_NATIVE_MAKE_CONSTANT(a,b,c,d) \ - (((unsigned)(a)<<24)|((unsigned)(b)<<16)|((unsigned)(c)<<8)|(unsigned)(d)) - -#define ANDROID_NATIVE_WINDOW_MAGIC \ - ANDROID_NATIVE_MAKE_CONSTANT('_','w','n','d') - -#define ANDROID_NATIVE_BUFFER_MAGIC \ - ANDROID_NATIVE_MAKE_CONSTANT('_','b','f','r') - -// --------------------------------------------------------------------------- - -// This #define may be used to conditionally compile device-specific code to -// support either the prior ANativeWindow interface, which did not pass libsync -// fences around, or the new interface that does. This #define is only present -// when the ANativeWindow interface does include libsync support. -#define ANDROID_NATIVE_WINDOW_HAS_SYNC 1 - -// --------------------------------------------------------------------------- - -typedef const native_handle_t* buffer_handle_t; - -// --------------------------------------------------------------------------- - -typedef struct android_native_rect_t -{ - int32_t left; - int32_t top; - int32_t right; - int32_t bottom; -} android_native_rect_t; - -// --------------------------------------------------------------------------- - -typedef struct android_native_base_t -{ - /* a magic value defined by the actual EGL native type */ - int magic; - - /* the sizeof() of the actual EGL native type */ - int version; - - void* reserved[4]; - - /* reference-counting interface */ - void (*incRef)(struct android_native_base_t* base); - void (*decRef)(struct android_native_base_t* base); -} android_native_base_t; - -typedef struct ANativeWindowBuffer -{ -#ifdef __cplusplus - ANativeWindowBuffer() { - common.magic = ANDROID_NATIVE_BUFFER_MAGIC; - common.version = sizeof(ANativeWindowBuffer); - memset(common.reserved, 0, sizeof(common.reserved)); - } - - // Implement the methods that sp<ANativeWindowBuffer> expects so that it - // can be used to automatically refcount ANativeWindowBuffer's. - void incStrong(const void* /*id*/) const { - common.incRef(const_cast<android_native_base_t*>(&common)); - } - void decStrong(const void* /*id*/) const { - common.decRef(const_cast<android_native_base_t*>(&common)); - } -#endif - - struct android_native_base_t common; - - int width; - int height; - int stride; - int format; - int usage; - - void* reserved[2]; - - buffer_handle_t handle; - - void* reserved_proc[8]; -} ANativeWindowBuffer_t; - -// Old typedef for backwards compatibility. -typedef ANativeWindowBuffer_t android_native_buffer_t; - -// --------------------------------------------------------------------------- - -/* attributes queriable with query() */ -enum { - NATIVE_WINDOW_WIDTH = 0, - NATIVE_WINDOW_HEIGHT = 1, - NATIVE_WINDOW_FORMAT = 2, - - /* The minimum number of buffers that must remain un-dequeued after a buffer - * has been queued. This value applies only if set_buffer_count was used to - * override the number of buffers and if a buffer has since been queued. - * Users of the set_buffer_count ANativeWindow method should query this - * value before calling set_buffer_count. If it is necessary to have N - * buffers simultaneously dequeued as part of the steady-state operation, - * and this query returns M then N+M buffers should be requested via - * native_window_set_buffer_count. - * - * Note that this value does NOT apply until a single buffer has been - * queued. In particular this means that it is possible to: - * - * 1. Query M = min undequeued buffers - * 2. Set the buffer count to N + M - * 3. Dequeue all N + M buffers - * 4. Cancel M buffers - * 5. Queue, dequeue, queue, dequeue, ad infinitum - */ - NATIVE_WINDOW_MIN_UNDEQUEUED_BUFFERS = 3, - - /* Check whether queueBuffer operations on the ANativeWindow send the buffer - * to the window compositor. The query sets the returned 'value' argument - * to 1 if the ANativeWindow DOES send queued buffers directly to the window - * compositor and 0 if the buffers do not go directly to the window - * compositor. - * - * This can be used to determine whether protected buffer content should be - * sent to the ANativeWindow. Note, however, that a result of 1 does NOT - * indicate that queued buffers will be protected from applications or users - * capturing their contents. If that behavior is desired then some other - * mechanism (e.g. the GRALLOC_USAGE_PROTECTED flag) should be used in - * conjunction with this query. - */ - NATIVE_WINDOW_QUEUES_TO_WINDOW_COMPOSER = 4, - - /* Get the concrete type of a ANativeWindow. See below for the list of - * possible return values. - * - * This query should not be used outside the Android framework and will - * likely be removed in the near future. - */ - NATIVE_WINDOW_CONCRETE_TYPE = 5, - - - /* - * Default width and height of ANativeWindow buffers, these are the - * dimensions of the window buffers irrespective of the - * NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS call and match the native window - * size unless overridden by NATIVE_WINDOW_SET_BUFFERS_USER_DIMENSIONS. - */ - NATIVE_WINDOW_DEFAULT_WIDTH = 6, - NATIVE_WINDOW_DEFAULT_HEIGHT = 7, - - /* - * transformation that will most-likely be applied to buffers. This is only - * a hint, the actual transformation applied might be different. - * - * INTENDED USE: - * - * The transform hint can be used by a producer, for instance the GLES - * driver, to pre-rotate the rendering such that the final transformation - * in the composer is identity. This can be very useful when used in - * conjunction with the h/w composer HAL, in situations where it - * cannot handle arbitrary rotations. - * - * 1. Before dequeuing a buffer, the GL driver (or any other ANW client) - * queries the ANW for NATIVE_WINDOW_TRANSFORM_HINT. - * - * 2. The GL driver overrides the width and height of the ANW to - * account for NATIVE_WINDOW_TRANSFORM_HINT. This is done by querying - * NATIVE_WINDOW_DEFAULT_{WIDTH | HEIGHT}, swapping the dimensions - * according to NATIVE_WINDOW_TRANSFORM_HINT and calling - * native_window_set_buffers_dimensions(). - * - * 3. The GL driver dequeues a buffer of the new pre-rotated size. - * - * 4. The GL driver renders to the buffer such that the image is - * already transformed, that is applying NATIVE_WINDOW_TRANSFORM_HINT - * to the rendering. - * - * 5. The GL driver calls native_window_set_transform to apply - * inverse transformation to the buffer it just rendered. - * In order to do this, the GL driver needs - * to calculate the inverse of NATIVE_WINDOW_TRANSFORM_HINT, this is - * done easily: - * - * int hintTransform, inverseTransform; - * query(..., NATIVE_WINDOW_TRANSFORM_HINT, &hintTransform); - * inverseTransform = hintTransform; - * if (hintTransform & HAL_TRANSFORM_ROT_90) - * inverseTransform ^= HAL_TRANSFORM_ROT_180; - * - * - * 6. The GL driver queues the pre-transformed buffer. - * - * 7. The composer combines the buffer transform with the display - * transform. If the buffer transform happens to cancel out the - * display transform then no rotation is needed. - * - */ - NATIVE_WINDOW_TRANSFORM_HINT = 8, - - /* - * Boolean that indicates whether the consumer is running more than - * one buffer behind the producer. - */ - NATIVE_WINDOW_CONSUMER_RUNNING_BEHIND = 9, - - /* - * The consumer gralloc usage bits currently set by the consumer. - * The values are defined in hardware/libhardware/include/gralloc.h. - */ - NATIVE_WINDOW_CONSUMER_USAGE_BITS = 10, - - /** - * Transformation that will by applied to buffers by the hwcomposer. - * This must not be set or checked by producer endpoints, and will - * disable the transform hint set in SurfaceFlinger (see - * NATIVE_WINDOW_TRANSFORM_HINT). - * - * INTENDED USE: - * Temporary - Please do not use this. This is intended only to be used - * by the camera's LEGACY mode. - * - * In situations where a SurfaceFlinger client wishes to set a transform - * that is not visible to the producer, and will always be applied in the - * hardware composer, the client can set this flag with - * native_window_set_buffers_sticky_transform. This can be used to rotate - * and flip buffers consumed by hardware composer without actually changing - * the aspect ratio of the buffers produced. - */ - NATIVE_WINDOW_STICKY_TRANSFORM = 11, - - /** - * The default data space for the buffers as set by the consumer. - * The values are defined in graphics.h. - */ - NATIVE_WINDOW_DEFAULT_DATASPACE = 12, - - /* - * Returns the age of the contents of the most recently dequeued buffer as - * the number of frames that have elapsed since it was last queued. For - * example, if the window is double-buffered, the age of any given buffer in - * steady state will be 2. If the dequeued buffer has never been queued, its - * age will be 0. - */ - NATIVE_WINDOW_BUFFER_AGE = 13, -}; - -/* Valid operations for the (*perform)() hook. - * - * Values marked as 'deprecated' are supported, but have been superceded by - * other functionality. - * - * Values marked as 'private' should be considered private to the framework. - * HAL implementation code with access to an ANativeWindow should not use these, - * as it may not interact properly with the framework's use of the - * ANativeWindow. - */ -enum { - NATIVE_WINDOW_SET_USAGE = 0, - NATIVE_WINDOW_CONNECT = 1, /* deprecated */ - NATIVE_WINDOW_DISCONNECT = 2, /* deprecated */ - NATIVE_WINDOW_SET_CROP = 3, /* private */ - NATIVE_WINDOW_SET_BUFFER_COUNT = 4, - NATIVE_WINDOW_SET_BUFFERS_GEOMETRY = 5, /* deprecated */ - NATIVE_WINDOW_SET_BUFFERS_TRANSFORM = 6, - NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP = 7, - NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS = 8, - NATIVE_WINDOW_SET_BUFFERS_FORMAT = 9, - NATIVE_WINDOW_SET_SCALING_MODE = 10, /* private */ - NATIVE_WINDOW_LOCK = 11, /* private */ - NATIVE_WINDOW_UNLOCK_AND_POST = 12, /* private */ - NATIVE_WINDOW_API_CONNECT = 13, /* private */ - NATIVE_WINDOW_API_DISCONNECT = 14, /* private */ - NATIVE_WINDOW_SET_BUFFERS_USER_DIMENSIONS = 15, /* private */ - NATIVE_WINDOW_SET_POST_TRANSFORM_CROP = 16, /* private */ - NATIVE_WINDOW_SET_BUFFERS_STICKY_TRANSFORM = 17,/* private */ - NATIVE_WINDOW_SET_SIDEBAND_STREAM = 18, - NATIVE_WINDOW_SET_BUFFERS_DATASPACE = 19, - NATIVE_WINDOW_SET_SURFACE_DAMAGE = 20, /* private */ -}; - -/* parameter for NATIVE_WINDOW_[API_][DIS]CONNECT */ -enum { - /* Buffers will be queued by EGL via eglSwapBuffers after being filled using - * OpenGL ES. - */ - NATIVE_WINDOW_API_EGL = 1, - - /* Buffers will be queued after being filled using the CPU - */ - NATIVE_WINDOW_API_CPU = 2, - - /* Buffers will be queued by Stagefright after being filled by a video - * decoder. The video decoder can either be a software or hardware decoder. - */ - NATIVE_WINDOW_API_MEDIA = 3, - - /* Buffers will be queued by the the camera HAL. - */ - NATIVE_WINDOW_API_CAMERA = 4, -}; - -/* parameter for NATIVE_WINDOW_SET_BUFFERS_TRANSFORM */ -enum { - /* flip source image horizontally */ - NATIVE_WINDOW_TRANSFORM_FLIP_H = HAL_TRANSFORM_FLIP_H , - /* flip source image vertically */ - NATIVE_WINDOW_TRANSFORM_FLIP_V = HAL_TRANSFORM_FLIP_V, - /* rotate source image 90 degrees clock-wise, and is applied after TRANSFORM_FLIP_{H|V} */ - NATIVE_WINDOW_TRANSFORM_ROT_90 = HAL_TRANSFORM_ROT_90, - /* rotate source image 180 degrees */ - NATIVE_WINDOW_TRANSFORM_ROT_180 = HAL_TRANSFORM_ROT_180, - /* rotate source image 270 degrees clock-wise */ - NATIVE_WINDOW_TRANSFORM_ROT_270 = HAL_TRANSFORM_ROT_270, - /* transforms source by the inverse transform of the screen it is displayed onto. This - * transform is applied last */ - NATIVE_WINDOW_TRANSFORM_INVERSE_DISPLAY = 0x08 -}; - -/* parameter for NATIVE_WINDOW_SET_SCALING_MODE */ -enum { - /* the window content is not updated (frozen) until a buffer of - * the window size is received (enqueued) - */ - NATIVE_WINDOW_SCALING_MODE_FREEZE = 0, - /* the buffer is scaled in both dimensions to match the window size */ - NATIVE_WINDOW_SCALING_MODE_SCALE_TO_WINDOW = 1, - /* the buffer is scaled uniformly such that the smaller dimension - * of the buffer matches the window size (cropping in the process) - */ - NATIVE_WINDOW_SCALING_MODE_SCALE_CROP = 2, - /* the window is clipped to the size of the buffer's crop rectangle; pixels - * outside the crop rectangle are treated as if they are completely - * transparent. - */ - NATIVE_WINDOW_SCALING_MODE_NO_SCALE_CROP = 3, -}; - -/* values returned by the NATIVE_WINDOW_CONCRETE_TYPE query */ -enum { - NATIVE_WINDOW_FRAMEBUFFER = 0, /* FramebufferNativeWindow */ - NATIVE_WINDOW_SURFACE = 1, /* Surface */ -}; - -/* parameter for NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP - * - * Special timestamp value to indicate that timestamps should be auto-generated - * by the native window when queueBuffer is called. This is equal to INT64_MIN, - * defined directly to avoid problems with C99/C++ inclusion of stdint.h. - */ -static const int64_t NATIVE_WINDOW_TIMESTAMP_AUTO = (-9223372036854775807LL-1); - -struct ANativeWindow -{ -#ifdef __cplusplus - ANativeWindow() - : flags(0), minSwapInterval(0), maxSwapInterval(0), xdpi(0), ydpi(0) - { - common.magic = ANDROID_NATIVE_WINDOW_MAGIC; - common.version = sizeof(ANativeWindow); - memset(common.reserved, 0, sizeof(common.reserved)); - } - - /* Implement the methods that sp<ANativeWindow> expects so that it - can be used to automatically refcount ANativeWindow's. */ - void incStrong(const void* /*id*/) const { - common.incRef(const_cast<android_native_base_t*>(&common)); - } - void decStrong(const void* /*id*/) const { - common.decRef(const_cast<android_native_base_t*>(&common)); - } -#endif - - struct android_native_base_t common; - - /* flags describing some attributes of this surface or its updater */ - const uint32_t flags; - - /* min swap interval supported by this updated */ - const int minSwapInterval; - - /* max swap interval supported by this updated */ - const int maxSwapInterval; - - /* horizontal and vertical resolution in DPI */ - const float xdpi; - const float ydpi; - - /* Some storage reserved for the OEM's driver. */ - intptr_t oem[4]; - - /* - * Set the swap interval for this surface. - * - * Returns 0 on success or -errno on error. - */ - int (*setSwapInterval)(struct ANativeWindow* window, - int interval); - - /* - * Hook called by EGL to acquire a buffer. After this call, the buffer - * is not locked, so its content cannot be modified. This call may block if - * no buffers are available. - * - * The window holds a reference to the buffer between dequeueBuffer and - * either queueBuffer or cancelBuffer, so clients only need their own - * reference if they might use the buffer after queueing or canceling it. - * Holding a reference to a buffer after queueing or canceling it is only - * allowed if a specific buffer count has been set. - * - * Returns 0 on success or -errno on error. - * - * XXX: This function is deprecated. It will continue to work for some - * time for binary compatibility, but the new dequeueBuffer function that - * outputs a fence file descriptor should be used in its place. - */ - int (*dequeueBuffer_DEPRECATED)(struct ANativeWindow* window, - struct ANativeWindowBuffer** buffer); - - /* - * hook called by EGL to lock a buffer. This MUST be called before modifying - * the content of a buffer. The buffer must have been acquired with - * dequeueBuffer first. - * - * Returns 0 on success or -errno on error. - * - * XXX: This function is deprecated. It will continue to work for some - * time for binary compatibility, but it is essentially a no-op, and calls - * to it should be removed. - */ - int (*lockBuffer_DEPRECATED)(struct ANativeWindow* window, - struct ANativeWindowBuffer* buffer); - - /* - * Hook called by EGL when modifications to the render buffer are done. - * This unlocks and post the buffer. - * - * The window holds a reference to the buffer between dequeueBuffer and - * either queueBuffer or cancelBuffer, so clients only need their own - * reference if they might use the buffer after queueing or canceling it. - * Holding a reference to a buffer after queueing or canceling it is only - * allowed if a specific buffer count has been set. - * - * Buffers MUST be queued in the same order than they were dequeued. - * - * Returns 0 on success or -errno on error. - * - * XXX: This function is deprecated. It will continue to work for some - * time for binary compatibility, but the new queueBuffer function that - * takes a fence file descriptor should be used in its place (pass a value - * of -1 for the fence file descriptor if there is no valid one to pass). - */ - int (*queueBuffer_DEPRECATED)(struct ANativeWindow* window, - struct ANativeWindowBuffer* buffer); - - /* - * hook used to retrieve information about the native window. - * - * Returns 0 on success or -errno on error. - */ - int (*query)(const struct ANativeWindow* window, - int what, int* value); - - /* - * hook used to perform various operations on the surface. - * (*perform)() is a generic mechanism to add functionality to - * ANativeWindow while keeping backward binary compatibility. - * - * DO NOT CALL THIS HOOK DIRECTLY. Instead, use the helper functions - * defined below. - * - * (*perform)() returns -ENOENT if the 'what' parameter is not supported - * by the surface's implementation. - * - * See above for a list of valid operations, such as - * NATIVE_WINDOW_SET_USAGE or NATIVE_WINDOW_CONNECT - */ - int (*perform)(struct ANativeWindow* window, - int operation, ... ); - - /* - * Hook used to cancel a buffer that has been dequeued. - * No synchronization is performed between dequeue() and cancel(), so - * either external synchronization is needed, or these functions must be - * called from the same thread. - * - * The window holds a reference to the buffer between dequeueBuffer and - * either queueBuffer or cancelBuffer, so clients only need their own - * reference if they might use the buffer after queueing or canceling it. - * Holding a reference to a buffer after queueing or canceling it is only - * allowed if a specific buffer count has been set. - * - * XXX: This function is deprecated. It will continue to work for some - * time for binary compatibility, but the new cancelBuffer function that - * takes a fence file descriptor should be used in its place (pass a value - * of -1 for the fence file descriptor if there is no valid one to pass). - */ - int (*cancelBuffer_DEPRECATED)(struct ANativeWindow* window, - struct ANativeWindowBuffer* buffer); - - /* - * Hook called by EGL to acquire a buffer. This call may block if no - * buffers are available. - * - * The window holds a reference to the buffer between dequeueBuffer and - * either queueBuffer or cancelBuffer, so clients only need their own - * reference if they might use the buffer after queueing or canceling it. - * Holding a reference to a buffer after queueing or canceling it is only - * allowed if a specific buffer count has been set. - * - * The libsync fence file descriptor returned in the int pointed to by the - * fenceFd argument will refer to the fence that must signal before the - * dequeued buffer may be written to. A value of -1 indicates that the - * caller may access the buffer immediately without waiting on a fence. If - * a valid file descriptor is returned (i.e. any value except -1) then the - * caller is responsible for closing the file descriptor. - * - * Returns 0 on success or -errno on error. - */ - int (*dequeueBuffer)(struct ANativeWindow* window, - struct ANativeWindowBuffer** buffer, int* fenceFd); - - /* - * Hook called by EGL when modifications to the render buffer are done. - * This unlocks and post the buffer. - * - * The window holds a reference to the buffer between dequeueBuffer and - * either queueBuffer or cancelBuffer, so clients only need their own - * reference if they might use the buffer after queueing or canceling it. - * Holding a reference to a buffer after queueing or canceling it is only - * allowed if a specific buffer count has been set. - * - * The fenceFd argument specifies a libsync fence file descriptor for a - * fence that must signal before the buffer can be accessed. If the buffer - * can be accessed immediately then a value of -1 should be used. The - * caller must not use the file descriptor after it is passed to - * queueBuffer, and the ANativeWindow implementation is responsible for - * closing it. - * - * Returns 0 on success or -errno on error. - */ - int (*queueBuffer)(struct ANativeWindow* window, - struct ANativeWindowBuffer* buffer, int fenceFd); - - /* - * Hook used to cancel a buffer that has been dequeued. - * No synchronization is performed between dequeue() and cancel(), so - * either external synchronization is needed, or these functions must be - * called from the same thread. - * - * The window holds a reference to the buffer between dequeueBuffer and - * either queueBuffer or cancelBuffer, so clients only need their own - * reference if they might use the buffer after queueing or canceling it. - * Holding a reference to a buffer after queueing or canceling it is only - * allowed if a specific buffer count has been set. - * - * The fenceFd argument specifies a libsync fence file decsriptor for a - * fence that must signal before the buffer can be accessed. If the buffer - * can be accessed immediately then a value of -1 should be used. - * - * Note that if the client has not waited on the fence that was returned - * from dequeueBuffer, that same fence should be passed to cancelBuffer to - * ensure that future uses of the buffer are preceded by a wait on that - * fence. The caller must not use the file descriptor after it is passed - * to cancelBuffer, and the ANativeWindow implementation is responsible for - * closing it. - * - * Returns 0 on success or -errno on error. - */ - int (*cancelBuffer)(struct ANativeWindow* window, - struct ANativeWindowBuffer* buffer, int fenceFd); -}; - - /* Backwards compatibility: use ANativeWindow (struct ANativeWindow in C). - * android_native_window_t is deprecated. - */ -typedef struct ANativeWindow ANativeWindow; -typedef struct ANativeWindow android_native_window_t __deprecated; - -/* - * native_window_set_usage(..., usage) - * Sets the intended usage flags for the next buffers - * acquired with (*lockBuffer)() and on. - * By default (if this function is never called), a usage of - * GRALLOC_USAGE_HW_RENDER | GRALLOC_USAGE_HW_TEXTURE - * is assumed. - * Calling this function will usually cause following buffers to be - * reallocated. - */ - -static inline int native_window_set_usage( - struct ANativeWindow* window, int usage) -{ - return window->perform(window, NATIVE_WINDOW_SET_USAGE, usage); -} - -/* deprecated. Always returns 0. Don't call. */ -static inline int native_window_connect( - struct ANativeWindow* window __UNUSED, int api __UNUSED) __deprecated; - -static inline int native_window_connect( - struct ANativeWindow* window __UNUSED, int api __UNUSED) { - return 0; -} - -/* deprecated. Always returns 0. Don't call. */ -static inline int native_window_disconnect( - struct ANativeWindow* window __UNUSED, int api __UNUSED) __deprecated; - -static inline int native_window_disconnect( - struct ANativeWindow* window __UNUSED, int api __UNUSED) { - return 0; -} - -/* - * native_window_set_crop(..., crop) - * Sets which region of the next queued buffers needs to be considered. - * Depending on the scaling mode, a buffer's crop region is scaled and/or - * cropped to match the surface's size. This function sets the crop in - * pre-transformed buffer pixel coordinates. - * - * The specified crop region applies to all buffers queued after it is called. - * - * If 'crop' is NULL, subsequently queued buffers won't be cropped. - * - * An error is returned if for instance the crop region is invalid, out of the - * buffer's bound or if the window is invalid. - */ -static inline int native_window_set_crop( - struct ANativeWindow* window, - android_native_rect_t const * crop) -{ - return window->perform(window, NATIVE_WINDOW_SET_CROP, crop); -} - -/* - * native_window_set_post_transform_crop(..., crop) - * Sets which region of the next queued buffers needs to be considered. - * Depending on the scaling mode, a buffer's crop region is scaled and/or - * cropped to match the surface's size. This function sets the crop in - * post-transformed pixel coordinates. - * - * The specified crop region applies to all buffers queued after it is called. - * - * If 'crop' is NULL, subsequently queued buffers won't be cropped. - * - * An error is returned if for instance the crop region is invalid, out of the - * buffer's bound or if the window is invalid. - */ -static inline int native_window_set_post_transform_crop( - struct ANativeWindow* window, - android_native_rect_t const * crop) -{ - return window->perform(window, NATIVE_WINDOW_SET_POST_TRANSFORM_CROP, crop); -} - -/* - * native_window_set_active_rect(..., active_rect) - * - * This function is deprecated and will be removed soon. For now it simply - * sets the post-transform crop for compatibility while multi-project commits - * get checked. - */ -static inline int native_window_set_active_rect( - struct ANativeWindow* window, - android_native_rect_t const * active_rect) __deprecated; - -static inline int native_window_set_active_rect( - struct ANativeWindow* window, - android_native_rect_t const * active_rect) -{ - return native_window_set_post_transform_crop(window, active_rect); -} - -/* - * native_window_set_buffer_count(..., count) - * Sets the number of buffers associated with this native window. - */ -static inline int native_window_set_buffer_count( - struct ANativeWindow* window, - size_t bufferCount) -{ - return window->perform(window, NATIVE_WINDOW_SET_BUFFER_COUNT, bufferCount); -} - -/* - * native_window_set_buffers_geometry(..., int w, int h, int format) - * All buffers dequeued after this call will have the dimensions and format - * specified. A successful call to this function has the same effect as calling - * native_window_set_buffers_size and native_window_set_buffers_format. - * - * XXX: This function is deprecated. The native_window_set_buffers_dimensions - * and native_window_set_buffers_format functions should be used instead. - */ -static inline int native_window_set_buffers_geometry( - struct ANativeWindow* window, - int w, int h, int format) __deprecated; - -static inline int native_window_set_buffers_geometry( - struct ANativeWindow* window, - int w, int h, int format) -{ - return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_GEOMETRY, - w, h, format); -} - -/* - * native_window_set_buffers_dimensions(..., int w, int h) - * All buffers dequeued after this call will have the dimensions specified. - * In particular, all buffers will have a fixed-size, independent from the - * native-window size. They will be scaled according to the scaling mode - * (see native_window_set_scaling_mode) upon window composition. - * - * If w and h are 0, the normal behavior is restored. That is, dequeued buffers - * following this call will be sized to match the window's size. - * - * Calling this function will reset the window crop to a NULL value, which - * disables cropping of the buffers. - */ -static inline int native_window_set_buffers_dimensions( - struct ANativeWindow* window, - int w, int h) -{ - return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_DIMENSIONS, - w, h); -} - -/* - * native_window_set_buffers_user_dimensions(..., int w, int h) - * - * Sets the user buffer size for the window, which overrides the - * window's size. All buffers dequeued after this call will have the - * dimensions specified unless overridden by - * native_window_set_buffers_dimensions. All buffers will have a - * fixed-size, independent from the native-window size. They will be - * scaled according to the scaling mode (see - * native_window_set_scaling_mode) upon window composition. - * - * If w and h are 0, the normal behavior is restored. That is, the - * default buffer size will match the windows's size. - * - * Calling this function will reset the window crop to a NULL value, which - * disables cropping of the buffers. - */ -static inline int native_window_set_buffers_user_dimensions( - struct ANativeWindow* window, - int w, int h) -{ - return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_USER_DIMENSIONS, - w, h); -} - -/* - * native_window_set_buffers_format(..., int format) - * All buffers dequeued after this call will have the format specified. - * - * If the specified format is 0, the default buffer format will be used. - */ -static inline int native_window_set_buffers_format( - struct ANativeWindow* window, - int format) -{ - return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_FORMAT, format); -} - -/* - * native_window_set_buffers_data_space(..., int dataSpace) - * All buffers queued after this call will be associated with the dataSpace - * parameter specified. - * - * dataSpace specifies additional information about the buffer that's dependent - * on the buffer format and the endpoints. For example, it can be used to convey - * the color space of the image data in the buffer, or it can be used to - * indicate that the buffers contain depth measurement data instead of color - * images. The default dataSpace is 0, HAL_DATASPACE_UNKNOWN, unless it has been - * overridden by the consumer. - */ -static inline int native_window_set_buffers_data_space( - struct ANativeWindow* window, - android_dataspace_t dataSpace) -{ - return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_DATASPACE, - dataSpace); -} - -/* - * native_window_set_buffers_transform(..., int transform) - * All buffers queued after this call will be displayed transformed according - * to the transform parameter specified. - */ -static inline int native_window_set_buffers_transform( - struct ANativeWindow* window, - int transform) -{ - return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_TRANSFORM, - transform); -} - -/* - * native_window_set_buffers_sticky_transform(..., int transform) - * All buffers queued after this call will be displayed transformed according - * to the transform parameter specified applied on top of the regular buffer - * transform. Setting this transform will disable the transform hint. - * - * Temporary - This is only intended to be used by the LEGACY camera mode, do - * not use this for anything else. - */ -static inline int native_window_set_buffers_sticky_transform( - struct ANativeWindow* window, - int transform) -{ - return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_STICKY_TRANSFORM, - transform); -} - -/* - * native_window_set_buffers_timestamp(..., int64_t timestamp) - * All buffers queued after this call will be associated with the timestamp - * parameter specified. If the timestamp is set to NATIVE_WINDOW_TIMESTAMP_AUTO - * (the default), timestamps will be generated automatically when queueBuffer is - * called. The timestamp is measured in nanoseconds, and is normally monotonically - * increasing. The timestamp should be unaffected by time-of-day adjustments, - * and for a camera should be strictly monotonic but for a media player may be - * reset when the position is set. - */ -static inline int native_window_set_buffers_timestamp( - struct ANativeWindow* window, - int64_t timestamp) -{ - return window->perform(window, NATIVE_WINDOW_SET_BUFFERS_TIMESTAMP, - timestamp); -} - -/* - * native_window_set_scaling_mode(..., int mode) - * All buffers queued after this call will be associated with the scaling mode - * specified. - */ -static inline int native_window_set_scaling_mode( - struct ANativeWindow* window, - int mode) -{ - return window->perform(window, NATIVE_WINDOW_SET_SCALING_MODE, - mode); -} - -/* - * native_window_api_connect(..., int api) - * connects an API to this window. only one API can be connected at a time. - * Returns -EINVAL if for some reason the window cannot be connected, which - * can happen if it's connected to some other API. - */ -static inline int native_window_api_connect( - struct ANativeWindow* window, int api) -{ - return window->perform(window, NATIVE_WINDOW_API_CONNECT, api); -} - -/* - * native_window_api_disconnect(..., int api) - * disconnect the API from this window. - * An error is returned if for instance the window wasn't connected in the - * first place. - */ -static inline int native_window_api_disconnect( - struct ANativeWindow* window, int api) -{ - return window->perform(window, NATIVE_WINDOW_API_DISCONNECT, api); -} - -/* - * native_window_dequeue_buffer_and_wait(...) - * Dequeue a buffer and wait on the fence associated with that buffer. The - * buffer may safely be accessed immediately upon this function returning. An - * error is returned if either of the dequeue or the wait operations fail. - */ -static inline int native_window_dequeue_buffer_and_wait(ANativeWindow *anw, - struct ANativeWindowBuffer** anb) { - return anw->dequeueBuffer_DEPRECATED(anw, anb); -} - -/* - * native_window_set_sideband_stream(..., native_handle_t*) - * Attach a sideband buffer stream to a native window. - */ -static inline int native_window_set_sideband_stream( - struct ANativeWindow* window, - native_handle_t* sidebandHandle) -{ - return window->perform(window, NATIVE_WINDOW_SET_SIDEBAND_STREAM, - sidebandHandle); -} - -/* - * native_window_set_surface_damage(..., android_native_rect_t* rects, int numRects) - * Set the surface damage (i.e., the region of the surface that has changed - * since the previous frame). The damage set by this call will be reset (to the - * default of full-surface damage) after calling queue, so this must be called - * prior to every frame with damage that does not cover the whole surface if the - * caller desires downstream consumers to use this optimization. - * - * The damage region is specified as an array of rectangles, with the important - * caveat that the origin of the surface is considered to be the bottom-left - * corner, as in OpenGL ES. - * - * If numRects is set to 0, rects may be NULL, and the surface damage will be - * set to the full surface (the same as if this function had not been called for - * this frame). - */ -static inline int native_window_set_surface_damage( - struct ANativeWindow* window, - const android_native_rect_t* rects, size_t numRects) -{ - return window->perform(window, NATIVE_WINDOW_SET_SURFACE_DAMAGE, - rects, numRects); -} - -__END_DECLS - -#endif /* SYSTEM_CORE_INCLUDE_ANDROID_WINDOW_H */ |