ipa: raspberrypi: Change to C style code comments

As part of the on-going refactor efforts for the source files in
src/ipa/raspberrypi/, switch all C++ style comments to C style comments.

Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

55 files changed, 888 insertions, 631 deletions

diff --git a/src/ipa/raspberrypi/cam_helper.hpp b/src/ipa/raspberrypi/cam_helper.hpp
index 0cd718c4..2408fa15 100644
--- a/src/ipa/raspberrypi/cam_helper.hpp
+++ b/src/ipa/raspberrypi/cam_helper.hpp
@@ -21,50 +21,52 @@
 
 namespace RPiController {
 
-// The CamHelper class provides a number of facilities that anyone trying
-// to drive a camera will need to know, but which are not provided by the
-// standard driver framework. Specifically, it provides:
-//
-// A "CameraMode" structure to describe extra information about the chosen
-// mode of the driver. For example, how it is cropped from the full sensor
-// area, how it is scaled, whether pixels are averaged compared to the full
-// resolution.
-//
-// The ability to convert between number of lines of exposure and actual
-// exposure time, and to convert between the sensor's gain codes and actual
-// gains.
-//
-// A function to return the number of frames of delay between updating exposure,
-// analogue gain and vblanking, and for the changes to take effect. For many
-// sensors these take the values 2, 1 and 2 respectively, but sensors that are
-// different will need to over-ride the default function provided.
-//
-// A function to query if the sensor outputs embedded data that can be parsed.
-//
-// A function to return the sensitivity of a given camera mode.
-//
-// A parser to parse the embedded data buffers provided by some sensors (for
-// example, the imx219 does; the ov5647 doesn't). This allows us to know for
-// sure the exposure and gain of the frame we're looking at. CamHelper
-// provides functions for converting analogue gains to and from the sensor's
-// native gain codes.
-//
-// Finally, a set of functions that determine how to handle the vagaries of
-// different camera modules on start-up or when switching modes. Some
-// modules may produce one or more frames that are not yet correctly exposed,
-// or where the metadata may be suspect. We have the following functions:
-// HideFramesStartup(): Tell the pipeline handler not to return this many
-//     frames at start-up. This can also be used to hide initial frames
-//     while the AGC and other algorithms are sorting themselves out.
-// HideFramesModeSwitch(): Tell the pipeline handler not to return this
-//     many frames after a mode switch (other than start-up). Some sensors
-//     may produce innvalid frames after a mode switch; others may not.
-// MistrustFramesStartup(): At start-up a sensor may return frames for
-//    which we should not run any control algorithms (for example, metadata
-//    may be invalid).
-// MistrustFramesModeSwitch(): The number of frames, after a mode switch
-//    (other than start-up), for which control algorithms should not run
-//    (for example, metadata may be unreliable).
+/*
+ * The CamHelper class provides a number of facilities that anyone trying
+ * to drive a camera will need to know, but which are not provided by the
+ * standard driver framework. Specifically, it provides:
+ *
+ * A "CameraMode" structure to describe extra information about the chosen
+ * mode of the driver. For example, how it is cropped from the full sensor
+ * area, how it is scaled, whether pixels are averaged compared to the full
+ * resolution.
+ *
+ * The ability to convert between number of lines of exposure and actual
+ * exposure time, and to convert between the sensor's gain codes and actual
+ * gains.
+ *
+ * A function to return the number of frames of delay between updating exposure,
+ * analogue gain and vblanking, and for the changes to take effect. For many
+ * sensors these take the values 2, 1 and 2 respectively, but sensors that are
+ * different will need to over-ride the default function provided.
+ *
+ * A function to query if the sensor outputs embedded data that can be parsed.
+ *
+ * A function to return the sensitivity of a given camera mode.
+ *
+ * A parser to parse the embedded data buffers provided by some sensors (for
+ * example, the imx219 does; the ov5647 doesn't). This allows us to know for
+ * sure the exposure and gain of the frame we're looking at. CamHelper
+ * provides functions for converting analogue gains to and from the sensor's
+ * native gain codes.
+ *
+ * Finally, a set of functions that determine how to handle the vagaries of
+ * different camera modules on start-up or when switching modes. Some
+ * modules may produce one or more frames that are not yet correctly exposed,
+ * or where the metadata may be suspect. We have the following functions:
+ * HideFramesStartup(): Tell the pipeline handler not to return this many
+ *     frames at start-up. This can also be used to hide initial frames
+ *     while the AGC and other algorithms are sorting themselves out.
+ * HideFramesModeSwitch(): Tell the pipeline handler not to return this
+ *     many frames after a mode switch (other than start-up). Some sensors
+ *     may produce innvalid frames after a mode switch; others may not.
+ * MistrustFramesStartup(): At start-up a sensor may return frames for
+ *    which we should not run any control algorithms (for example, metadata
+ *    may be invalid).
+ * MistrustFramesModeSwitch(): The number of frames, after a mode switch
+ *    (other than start-up), for which control algorithms should not run
+ *    (for example, metadata may be unreliable).
+ */
 
 class CamHelper
 {
@@ -110,8 +112,10 @@ private:
 	unsigned int frameIntegrationDiff_;
 };
 
-// This is for registering camera helpers with the system, so that the
-// CamHelper::Create function picks them up automatically.
+/*
+ * This is for registering camera helpers with the system, so that the
+ * CamHelper::Create function picks them up automatically.
+ */
 
 typedef CamHelper *(*CamHelperCreateFunc)();
 struct RegisterCamHelper
@@ -120,4 +124,4 @@ struct RegisterCamHelper
 			  CamHelperCreateFunc createFunc);
 };
 
-} // namespace RPi
+} /* namespace RPi */
diff --git a/src/ipa/raspberrypi/controller/agc_algorithm.hpp b/src/ipa/raspberrypi/controller/agc_algorithm.hpp
index 51900b68..b718e595 100644
--- a/src/ipa/raspberrypi/controller/agc_algorithm.hpp
+++ b/src/ipa/raspberrypi/controller/agc_algorithm.hpp
@@ -16,7 +16,7 @@ class AgcAlgorithm : public Algorithm
 {
 public:
 	AgcAlgorithm(Controller *controller) : Algorithm(controller) {}
-	// An AGC algorithm must provide the following:
+	/* An AGC algorithm must provide the following: */
 	virtual unsigned int getConvergenceFrames() const = 0;
 	virtual void setEv(double ev) = 0;
 	virtual void setFlickerPeriod(libcamera::utils::Duration flickerPeriod) = 0;
@@ -28,4 +28,4 @@ public:
 	virtual void setConstraintMode(std::string const &contraintModeName) = 0;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/agc_status.h b/src/ipa/raspberrypi/controller/agc_status.h
index d36b40d8..9d184a15 100644
--- a/src/ipa/raspberrypi/controller/agc_status.h
+++ b/src/ipa/raspberrypi/controller/agc_status.h
@@ -8,20 +8,24 @@
 
 #include <libcamera/base/utils.h>
 
-// The AGC algorithm should post the following structure into the image's
-// "agc.status" metadata.
+/*
+ * The AGC algorithm should post the following structure into the image's
+ * "agc.status" metadata.
+ */
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
-// Note: total_exposure_value will be reported as zero until the algorithm has
-// seen statistics and calculated meaningful values. The contents should be
-// ignored until then.
+/*
+ * Note: total_exposure_value will be reported as zero until the algorithm has
+ * seen statistics and calculated meaningful values. The contents should be
+ * ignored until then.
+ */
 
 struct AgcStatus {
-	libcamera::utils::Duration totalExposureValue; // value for all exposure and gain for this image
-	libcamera::utils::Duration targetExposureValue; // (unfiltered) target total exposure AGC is aiming for
+	libcamera::utils::Duration totalExposureValue; /* value for all exposure and gain for this image */
+	libcamera::utils::Duration targetExposureValue; /* (unfiltered) target total exposure AGC is aiming for */
 	libcamera::utils::Duration shutterTime;
 	double analogueGain;
 	char exposureMode[32];
diff --git a/src/ipa/raspberrypi/controller/algorithm.cpp b/src/ipa/raspberrypi/controller/algorithm.cpp
index cfcd18a9..e3afa647 100644
--- a/src/ipa/raspberrypi/controller/algorithm.cpp
+++ b/src/ipa/raspberrypi/controller/algorithm.cpp
@@ -31,7 +31,7 @@ void Algorithm::process([[maybe_unused]] StatisticsPtr &stats,
 {
 }
 
-// For registering algorithms with the system:
+/* For registering algorithms with the system: */
 
 static std::map<std::string, AlgoCreateFunc> algorithms;
 std::map<std::string, AlgoCreateFunc> const &RPiController::getAlgorithms()
diff --git a/src/ipa/raspberrypi/controller/algorithm.hpp b/src/ipa/raspberrypi/controller/algorithm.hpp
index a33b14da..cad7c15b 100644
--- a/src/ipa/raspberrypi/controller/algorithm.hpp
+++ b/src/ipa/raspberrypi/controller/algorithm.hpp
@@ -6,8 +6,10 @@
  */
 #pragma once
 
-// All algorithms should be derived from this class and made available to the
-// Controller.
+/*
+ * All algorithms should be derived from this class and made available to the
+ * Controller.
+ */
 
 #include <string>
 #include <memory>
@@ -19,7 +21,7 @@
 
 namespace RPiController {
 
-// This defines the basic interface for all control algorithms.
+/* This defines the basic interface for all control algorithms. */
 
 class Algorithm
 {
@@ -48,8 +50,10 @@ private:
 	bool paused_;
 };
 
-// This code is for automatic registration of Front End algorithms with the
-// system.
+/*
+ * This code is for automatic registration of Front End algorithms with the
+ * system.
+ */
 
 typedef Algorithm *(*AlgoCreateFunc)(Controller *controller);
 struct RegisterAlgorithm {
@@ -57,4 +61,4 @@ struct RegisterAlgorithm {
 };
 std::map<std::string, AlgoCreateFunc> const &getAlgorithms();
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/alsc_status.h b/src/ipa/raspberrypi/controller/alsc_status.h
index d3f57971..e074f935 100644
--- a/src/ipa/raspberrypi/controller/alsc_status.h
+++ b/src/ipa/raspberrypi/controller/alsc_status.h
@@ -6,8 +6,10 @@
  */
 #pragma once
 
-// The ALSC algorithm should post the following structure into the image's
-// "alsc.status" metadata.
+/*
+ * The ALSC algorithm should post the following structure into the image's
+ * "alsc.status" metadata.
+ */
 
 #ifdef __cplusplus
 extern "C" {
diff --git a/src/ipa/raspberrypi/controller/awb_algorithm.hpp b/src/ipa/raspberrypi/controller/awb_algorithm.hpp
index c5d2ca90..0de74fce 100644
--- a/src/ipa/raspberrypi/controller/awb_algorithm.hpp
+++ b/src/ipa/raspberrypi/controller/awb_algorithm.hpp
@@ -14,10 +14,10 @@ class AwbAlgorithm : public Algorithm
 {
 public:
 	AwbAlgorithm(Controller *controller) : Algorithm(controller) {}
-	// An AWB algorithm must provide the following:
+	/* An AWB algorithm must provide the following: */
 	virtual unsigned int getConvergenceFrames() const = 0;
 	virtual void setMode(std::string const &modeName) = 0;
 	virtual void setManualGains(double manualR, double manualB) = 0;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/awb_status.h b/src/ipa/raspberrypi/controller/awb_status.h
index bc428ed3..2f6e88ef 100644
--- a/src/ipa/raspberrypi/controller/awb_status.h
+++ b/src/ipa/raspberrypi/controller/awb_status.h
@@ -6,8 +6,10 @@
  */
 #pragma once
 
-// The AWB algorithm places its results into both the image and global metadata,
-// under the tag "awb.status".
+/*
+ * The AWB algorithm places its results into both the image and global metadata,
+ * under the tag "awb.status".
+ */
 
 #ifdef __cplusplus
 extern "C" {
diff --git a/src/ipa/raspberrypi/controller/black_level_status.h b/src/ipa/raspberrypi/controller/black_level_status.h
index df366140..8b052383 100644
--- a/src/ipa/raspberrypi/controller/black_level_status.h
+++ b/src/ipa/raspberrypi/controller/black_level_status.h
@@ -6,14 +6,14 @@
  */
 #pragma once
 
-// The "black level" algorithm stores the black levels to use.
+/* The "black level" algorithm stores the black levels to use. */
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
 struct BlackLevelStatus {
-	uint16_t blackLevelR; // out of 16 bits
+	uint16_t blackLevelR; /* out of 16 bits */
 	uint16_t blackLevelG;
 	uint16_t blackLevelB;
 };
diff --git a/src/ipa/raspberrypi/controller/camera_mode.h b/src/ipa/raspberrypi/controller/camera_mode.h
index 8b81ca9d..47a0fea4 100644
--- a/src/ipa/raspberrypi/controller/camera_mode.h
+++ b/src/ipa/raspberrypi/controller/camera_mode.h
@@ -10,9 +10,11 @@
 
 #include <libcamera/base/utils.h>
 
-// Description of a "camera mode", holding enough information for control
-// algorithms to adapt their behaviour to the different modes of the camera,
-// including binning, scaling, cropping etc.
+/*
+ * Description of a "camera mode", holding enough information for control
+ * algorithms to adapt their behaviour to the different modes of the camera,
+ * including binning, scaling, cropping etc.
+ */
 
 #ifdef __cplusplus
 extern "C" {
@@ -21,27 +23,27 @@ extern "C" {
 #define CAMERA_MODE_NAME_LEN 32
 
 struct CameraMode {
-	// bit depth of the raw camera output
+	/* bit depth of the raw camera output */
 	uint32_t bitdepth;
-	// size in pixels of frames in this mode
+	/* size in pixels of frames in this mode */
 	uint16_t width, height;
-	// size of full resolution uncropped frame ("sensor frame")
+	/* size of full resolution uncropped frame ("sensor frame") */
 	uint16_t sensorWidth, sensorHeight;
-	// binning factor (1 = no binning, 2 = 2-pixel binning etc.)
+	/* binning factor (1 = no binning, 2 = 2-pixel binning etc.) */
 	uint8_t binX, binY;
-	// location of top left pixel in the sensor frame
+	/* location of top left pixel in the sensor frame */
 	uint16_t cropX, cropY;
-	// scaling factor (so if uncropped, width*scaleX is sensorWidth)
+	/* scaling factor (so if uncropped, width*scaleX is sensorWidth) */
 	double scaleX, scaleY;
-	// scaling of the noise compared to the native sensor mode
+	/* scaling of the noise compared to the native sensor mode */
 	double noiseFactor;
-	// line time
+	/* line time */
 	libcamera::utils::Duration lineLength;
-	// any camera transform *not* reflected already in the camera tuning
+	/* any camera transform *not* reflected already in the camera tuning */
 	libcamera::Transform transform;
-	// minimum and maximum fame lengths in units of lines
+	/* minimum and maximum fame lengths in units of lines */
 	uint32_t minFrameLength, maxFrameLength;
-	// sensitivity of this mode
+	/* sensitivity of this mode */
 	double sensitivity;
 };
 
diff --git a/src/ipa/raspberrypi/controller/ccm_algorithm.hpp b/src/ipa/raspberrypi/controller/ccm_algorithm.hpp
index b8b5879b..9c7172f5 100644
--- a/src/ipa/raspberrypi/controller/ccm_algorithm.hpp
+++ b/src/ipa/raspberrypi/controller/ccm_algorithm.hpp
@@ -14,8 +14,8 @@ class CcmAlgorithm : public Algorithm
 {
 public:
 	CcmAlgorithm(Controller *controller) : Algorithm(controller) {}
-	// A CCM algorithm must provide the following:
+	/* A CCM algorithm must provide the following: */
 	virtual void setSaturation(double saturation) = 0;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/ccm_status.h b/src/ipa/raspberrypi/controller/ccm_status.h
index 7e41dd1f..4cdd8bed 100644
--- a/src/ipa/raspberrypi/controller/ccm_status.h
+++ b/src/ipa/raspberrypi/controller/ccm_status.h
@@ -6,7 +6,7 @@
  */
 #pragma once
 
-// The "ccm" algorithm generates an appropriate colour matrix.
+/* The "ccm" algorithm generates an appropriate colour matrix. */
 
 #ifdef __cplusplus
 extern "C" {
diff --git a/src/ipa/raspberrypi/controller/contrast_algorithm.hpp b/src/ipa/raspberrypi/controller/contrast_algorithm.hpp
index c76f3cd7..1c0562e1 100644
--- a/src/ipa/raspberrypi/controller/contrast_algorithm.hpp
+++ b/src/ipa/raspberrypi/controller/contrast_algorithm.hpp
@@ -14,9 +14,9 @@ class ContrastAlgorithm : public Algorithm
 {
 public:
 	ContrastAlgorithm(Controller *controller) : Algorithm(controller) {}
-	// A contrast algorithm must provide the following:
+	/* A contrast algorithm must provide the following: */
 	virtual void setBrightness(double brightness) = 0;
 	virtual void setContrast(double contrast) = 0;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/contrast_status.h b/src/ipa/raspberrypi/controller/contrast_status.h
index d7edd4e9..5eb084f7 100644
--- a/src/ipa/raspberrypi/controller/contrast_status.h
+++ b/src/ipa/raspberrypi/controller/contrast_status.h
@@ -6,8 +6,10 @@
  */
 #pragma once
 
-// The "contrast" algorithm creates a gamma curve, optionally doing a little bit
-// of contrast stretching based on the AGC histogram.
+/*
+ * The "contrast" algorithm creates a gamma curve, optionally doing a little bit
+ * of contrast stretching based on the AGC histogram.
+ */
 
 #ifdef __cplusplus
 extern "C" {
diff --git a/src/ipa/raspberrypi/controller/controller.cpp b/src/ipa/raspberrypi/controller/controller.cpp
index e0b152c7..6d95fa55 100644
--- a/src/ipa/raspberrypi/controller/controller.cpp
+++ b/src/ipa/raspberrypi/controller/controller.cpp
@@ -89,8 +89,10 @@ Metadata &Controller::getGlobalMetadata()
 
 Algorithm *Controller::getAlgorithm(std::string const &name) const
 {
-	// The passed name must be the entire algorithm name, or must match the
-	// last part of it with a period (.) just before.
+	/*
+	 * The passed name must be the entire algorithm name, or must match the
+	 * last part of it with a period (.) just before.
+	 */
 	size_t nameLen = name.length();
 	for (auto &algo : algorithms_) {
 		char const *algoName = algo->name();
diff --git a/src/ipa/raspberrypi/controller/controller.hpp b/src/ipa/raspberrypi/controller/controller.hpp
index a5e1eb38..29b2e8f3 100644
--- a/src/ipa/raspberrypi/controller/controller.hpp
+++ b/src/ipa/raspberrypi/controller/controller.hpp
@@ -6,9 +6,11 @@
  */
 #pragma once
 
-// The Controller is simply a container for a collecting together a number of
-// "control algorithms" (such as AWB etc.) and for running them all in a
-// convenient manner.
+/*
+ * The Controller is simply a container for a collecting together a number of
+ * "control algorithms" (such as AWB etc.) and for running them all in a
+ * convenient manner.
+ */
 
 #include <vector>
 #include <string>
@@ -25,10 +27,12 @@ class Algorithm;
 typedef std::unique_ptr<Algorithm> AlgorithmPtr;
 typedef std::shared_ptr<bcm2835_isp_stats> StatisticsPtr;
 
-// The Controller holds a pointer to some global_metadata, which is how
-// different controllers and control algorithms within them can exchange
-// information. The Prepare function returns a pointer to metadata for this
-// specific image, and which should be passed on to the Process function.
+/*
+ * The Controller holds a pointer to some global_metadata, which is how
+ * different controllers and control algorithms within them can exchange
+ * information. The Prepare function returns a pointer to metadata for this
+ * specific image, and which should be passed on to the Process function.
+ */
 
 class Controller
 {
@@ -51,4 +55,4 @@ protected:
 	bool switchModeCalled_;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/denoise_algorithm.hpp b/src/ipa/raspberrypi/controller/denoise_algorithm.hpp
index 48de542a..7004fe55 100644
--- a/src/ipa/raspberrypi/controller/denoise_algorithm.hpp
+++ b/src/ipa/raspberrypi/controller/denoise_algorithm.hpp
@@ -16,8 +16,8 @@ class DenoiseAlgorithm : public Algorithm
 {
 public:
 	DenoiseAlgorithm(Controller *controller) : Algorithm(controller) {}
-	// A Denoise algorithm must provide the following:
+	/* A Denoise algorithm must provide the following: */
 	virtual void setMode(DenoiseMode mode) = 0;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/denoise_status.h b/src/ipa/raspberrypi/controller/denoise_status.h
index fe304d09..c2d9c730 100644
--- a/src/ipa/raspberrypi/controller/denoise_status.h
+++ b/src/ipa/raspberrypi/controller/denoise_status.h
@@ -6,7 +6,7 @@
  */
 #pragma once
 
-// This stores the parameters required for Denoise.
+/* This stores the parameters required for Denoise. */
 
 #ifdef __cplusplus
 extern "C" {
diff --git a/src/ipa/raspberrypi/controller/dpc_status.h b/src/ipa/raspberrypi/controller/dpc_status.h
index a3ec2762..c99ad8c5 100644
--- a/src/ipa/raspberrypi/controller/dpc_status.h
+++ b/src/ipa/raspberrypi/controller/dpc_status.h
@@ -6,14 +6,14 @@
  */
 #pragma once
 
-// The "DPC" algorithm sets defective pixel correction strength.
+/* The "DPC" algorithm sets defective pixel correction strength. */
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
 struct DpcStatus {
-	int strength; // 0 = "off", 1 = "normal", 2 = "strong"
+	int strength; /* 0 = "off", 1 = "normal", 2 = "strong" */
 };
 
 #ifdef __cplusplus
diff --git a/src/ipa/raspberrypi/controller/focus_status.h b/src/ipa/raspberrypi/controller/focus_status.h
index 65645510..c75795dc 100644
--- a/src/ipa/raspberrypi/controller/focus_status.h
+++ b/src/ipa/raspberrypi/controller/focus_status.h
@@ -8,9 +8,11 @@
 
 #include <linux/bcm2835-isp.h>
 
-// The focus algorithm should post the following structure into the image's
-// "focus.status" metadata. Recall that it's only reporting focus (contrast)
-// measurements, it's not driving any kind of auto-focus algorithm!
+/*
+ * The focus algorithm should post the following structure into the image's
+ * "focus.status" metadata. Recall that it's only reporting focus (contrast)
+ * measurements, it's not driving any kind of auto-focus algorithm!
+ */
 
 #ifdef __cplusplus
 extern "C" {
diff --git a/src/ipa/raspberrypi/controller/geq_status.h b/src/ipa/raspberrypi/controller/geq_status.h
index 07fd5f03..0ebb7ce7 100644
--- a/src/ipa/raspberrypi/controller/geq_status.h
+++ b/src/ipa/raspberrypi/controller/geq_status.h
@@ -6,7 +6,7 @@
  */
 #pragma once
 
-// The "GEQ" algorithm calculates the green equalisation thresholds
+/* The "GEQ" algorithm calculates the green equalisation thresholds */
 
 #ifdef __cplusplus
 extern "C" {
diff --git a/src/ipa/raspberrypi/controller/histogram.cpp b/src/ipa/raspberrypi/controller/histogram.cpp
index e865bef0..91a759b5 100644
--- a/src/ipa/raspberrypi/controller/histogram.cpp
+++ b/src/ipa/raspberrypi/controller/histogram.cpp
@@ -30,13 +30,13 @@ double Histogram::quantile(double q, int first, int last) const
 		last = cumulative_.size() - 2;
 	assert(first <= last);
 	uint64_t items = q * total();
-	while (first < last) // binary search to find the right bin
+	while (first < last) /* binary search to find the right bin */
 	{
 		int middle = (first + last) / 2;
 		if (cumulative_[middle + 1] > items)
-			last = middle; // between first and middle
+			last = middle; /* between first and middle */
 		else
-			first = middle + 1; // after middle
+			first = middle + 1; /* after middle */
 	}
 	assert(items >= cumulative_[first] && items <= cumulative_[last + 1]);
 	double frac = cumulative_[first + 1] == cumulative_[first] ? 0
@@ -59,6 +59,6 @@ double Histogram::interQuantileMean(double qLo, double qHi) const
 		sumBinFreq += bin * freq;
 		cumulFreq += freq;
 	}
-	// add 0.5 to give an average for bin mid-points
+	/* add 0.5 to give an average for bin mid-points */
 	return sumBinFreq / cumulFreq + 0.5;
 }
diff --git a/src/ipa/raspberrypi/controller/histogram.hpp b/src/ipa/raspberrypi/controller/histogram.hpp
index 4ff5a56b..2ed8d971 100644
--- a/src/ipa/raspberrypi/controller/histogram.hpp
+++ b/src/ipa/raspberrypi/controller/histogram.hpp
@@ -10,8 +10,10 @@
 #include <vector>
 #include <cassert>
 
-// A simple histogram class, for use in particular to find "quantiles" and
-// averages between "quantiles".
+/*
+ * A simple histogram class, for use in particular to find "quantiles" and
+ * averages between "quantiles".
+ */
 
 namespace RPiController {
 
@@ -29,16 +31,18 @@ public:
 	}
 	uint32_t bins() const { return cumulative_.size() - 1; }
 	uint64_t total() const { return cumulative_[cumulative_.size() - 1]; }
-	// Cumulative frequency up to a (fractional) point in a bin.
+	/* Cumulative frequency up to a (fractional) point in a bin. */
 	uint64_t cumulativeFreq(double bin) const;
-	// Return the (fractional) bin of the point q (0 <= q <= 1) through the
-	// histogram. Optionally provide limits to help.
+	/*
+	 * Return the (fractional) bin of the point q (0 <= q <= 1) through the
+	 * histogram. Optionally provide limits to help.
+	 */
 	double quantile(double q, int first = -1, int last = -1) const;
-	// Return the average histogram bin value between the two quantiles.
+	/* Return the average histogram bin value between the two quantiles. */
 	double interQuantileMean(double qLo, double qHi) const;
 
 private:
 	std::vector<uint64_t> cumulative_;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/lux_status.h b/src/ipa/raspberrypi/controller/lux_status.h
index 8ccfd933..c1134bec 100644
--- a/src/ipa/raspberrypi/controller/lux_status.h
+++ b/src/ipa/raspberrypi/controller/lux_status.h
@@ -6,14 +6,16 @@
  */
 #pragma once
 
-// The "lux" algorithm looks at the (AGC) histogram statistics of the frame and
-// estimates the current lux level of the scene. It does this by a simple ratio
-// calculation comparing to a reference image that was taken in known conditions
-// with known statistics and a properly measured lux level. There is a slight
-// problem with aperture, in that it may be variable without the system knowing
-// or being aware of it. In this case an external application may set a
-// "current_aperture" value if it wishes, which would be used in place of the
-// (presumably meaningless) value in the image metadata.
+/*
+ * The "lux" algorithm looks at the (AGC) histogram statistics of the frame and
+ * estimates the current lux level of the scene. It does this by a simple ratio
+ * calculation comparing to a reference image that was taken in known conditions
+ * with known statistics and a properly measured lux level. There is a slight
+ * problem with aperture, in that it may be variable without the system knowing
+ * or being aware of it. In this case an external application may set a
+ * "current_aperture" value if it wishes, which would be used in place of the
+ * (presumably meaningless) value in the image metadata.
+ */
 
 #ifdef __cplusplus
 extern "C" {
diff --git a/src/ipa/raspberrypi/controller/metadata.hpp b/src/ipa/raspberrypi/controller/metadata.hpp
index a79a67d4..9f73e61e 100644
--- a/src/ipa/raspberrypi/controller/metadata.hpp
+++ b/src/ipa/raspberrypi/controller/metadata.hpp
@@ -6,7 +6,7 @@
  */
 #pragma once
 
-// A simple class for carrying arbitrary metadata, for example about an image.
+/* A simple class for carrying arbitrary metadata, for example about an image. */
 
 #include <any>
 #include <map>
@@ -81,8 +81,10 @@ public:
 	template<typename T>
 	T *getLocked(std::string const &tag)
 	{
-		// This allows in-place access to the Metadata contents,
-		// for which you should be holding the lock.
+		/*
+		 * This allows in-place access to the Metadata contents,
+		 * for which you should be holding the lock.
+		 */
 		auto it = data_.find(tag);
 		if (it == data_.end())
 			return nullptr;
@@ -92,13 +94,15 @@ public:
 	template<typename T>
 	void setLocked(std::string const &tag, T const &value)
 	{
-		// Use this only if you're holding the lock yourself.
+		/* Use this only if you're holding the lock yourself. */
 		data_[tag] = value;
 	}
 
-	// Note: use of (lowercase) lock and unlock means you can create scoped
-	// locks with the standard lock classes.
-	// e.g. std::lock_guard<RPiController::Metadata> lock(metadata)
+	/*
+	 * Note: use of (lowercase) lock and unlock means you can create scoped
+	 * locks with the standard lock classes.
+	 * e.g. std::lock_guard<RPiController::Metadata> lock(metadata)
+	 */
 	void lock() { mutex_.lock(); }
 	void unlock() { mutex_.unlock(); }
 
@@ -107,4 +111,4 @@ private:
 	std::map<std::string, std::any> data_;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/noise_status.h b/src/ipa/raspberrypi/controller/noise_status.h
index 358af4fe..689beed3 100644
--- a/src/ipa/raspberrypi/controller/noise_status.h
+++ b/src/ipa/raspberrypi/controller/noise_status.h
@@ -6,7 +6,7 @@
  */
 #pragma once
 
-// The "noise" algorithm stores an estimate of the noise profile for this image.
+/* The "noise" algorithm stores an estimate of the noise profile for this image. */
 
 #ifdef __cplusplus
 extern "C" {
diff --git a/src/ipa/raspberrypi/controller/pwl.cpp b/src/ipa/raspberrypi/controller/pwl.cpp
index 24ff3ea3..d93cd201 100644
--- a/src/ipa/raspberrypi/controller/pwl.cpp
+++ b/src/ipa/raspberrypi/controller/pwl.cpp
@@ -66,11 +66,15 @@ double Pwl::eval(double x, int *spanPtr, bool updateSpan) const
 
 int Pwl::findSpan(double x, int span) const
 {
-	// Pwls are generally small, so linear search may well be faster than
-	// binary, though could review this if large PWls start turning up.
+	/*
+	 * Pwls are generally small, so linear search may well be faster than
+	 * binary, though could review this if large PWls start turning up.
+	 */
 	int lastSpan = points_.size() - 2;
-	// some algorithms may call us with span pointing directly at the last
-	// control point
+	/*
+	 * some algorithms may call us with span pointing directly at the last
+	 * control point
+	 */
 	span = std::max(0, std::min(lastSpan, span));
 	while (span < lastSpan && x >= points_[span + 1].x)
 		span++;
@@ -87,7 +91,7 @@ Pwl::PerpType Pwl::invert(Point const &xy, Point &perp, int &span,
 	for (span = span + 1; span < (int)points_.size() - 1; span++) {
 		Point spanVec = points_[span + 1] - points_[span];
 		double t = ((xy - points_[span]) % spanVec) / spanVec.len2();
-		if (t < -eps) // off the start of this span
+		if (t < -eps) /* off the start of this span */
 		{
 			if (span == 0) {
 				perp = points_[span];
@@ -96,14 +100,14 @@ Pwl::PerpType Pwl::invert(Point const &xy, Point &perp, int &span,
 				perp = points_[span];
 				return PerpType::Vertex;
 			}
-		} else if (t > 1 + eps) // off the end of this span
+		} else if (t > 1 + eps) /* off the end of this span */
 		{
 			if (span == (int)points_.size() - 2) {
 				perp = points_[span + 1];
 				return PerpType::End;
 			}
 			prevOffEnd = true;
-		} else // a true perpendicular
+		} else /* a true perpendicular */
 		{
 			perp = points_[span] + spanVec * t;
 			return PerpType::Perpendicular;
@@ -133,9 +137,11 @@ Pwl Pwl::inverse(bool *trueInverse, const double eps) const
 			neither = true;
 	}
 
-	// This is not a proper inverse if we found ourselves putting points
-	// onto both ends of the inverse, or if there were points that couldn't
-	// go on either.
+	/*
+	 * This is not a proper inverse if we found ourselves putting points
+	 * onto both ends of the inverse, or if there were points that couldn't
+	 * go on either.
+	 */
 	if (trueInverse)
 		*trueInverse = !(neither || (appended && prepended));
 
@@ -154,8 +160,10 @@ Pwl Pwl::compose(Pwl const &other, const double eps) const
 		    otherSpan + 1 < (int)other.points_.size() &&
 		    points_[thisSpan + 1].y >=
 			    other.points_[otherSpan + 1].x + eps) {
-			// next control point in result will be where this
-			// function's y reaches the next span in other
+			/*
+			 * next control point in result will be where this
+			 * function's y reaches the next span in other
+			 */
 			thisX = points_[thisSpan].x +
 				(other.points_[otherSpan + 1].x -
 				 points_[thisSpan].y) *
@@ -164,15 +172,17 @@ Pwl Pwl::compose(Pwl const &other, const double eps) const
 		} else if (abs(dy) > eps && otherSpan > 0 &&
 			   points_[thisSpan + 1].y <=
 				   other.points_[otherSpan - 1].x - eps) {
-			// next control point in result will be where this
-			// function's y reaches the previous span in other
+			/*
+			 * next control point in result will be where this
+			 * function's y reaches the previous span in other
+			 */
 			thisX = points_[thisSpan].x +
 				(other.points_[otherSpan + 1].x -
 				 points_[thisSpan].y) *
 					dx / dy;
 			thisY = other.points_[--otherSpan].x;
 		} else {
-			// we stay in the same span in other
+			/* we stay in the same span in other */
 			thisSpan++;
 			thisX = points_[thisSpan].x,
 			thisY = points_[thisSpan].y;
diff --git a/src/ipa/raspberrypi/controller/pwl.hpp b/src/ipa/raspberrypi/controller/pwl.hpp
index 4a38d1df..e409c966 100644
--- a/src/ipa/raspberrypi/controller/pwl.hpp
+++ b/src/ipa/raspberrypi/controller/pwl.hpp
@@ -63,44 +63,56 @@ public:
 	Interval domain() const;
 	Interval range() const;
 	bool empty() const;
-	// Evaluate Pwl, optionally supplying an initial guess for the
-	// "span". The "span" may be optionally be updated.  If you want to know
-	// the "span" value but don't have an initial guess you can set it to
-	// -1.
+	/*
+	 * Evaluate Pwl, optionally supplying an initial guess for the
+	 * "span". The "span" may be optionally be updated.  If you want to know
+	 * the "span" value but don't have an initial guess you can set it to
+	 * -1.
+	 */
 	double eval(double x, int *spanPtr = nullptr,
 		    bool updateSpan = true) const;
-	// Find perpendicular closest to xy, starting from span+1 so you can
-	// call it repeatedly to check for multiple closest points (set span to
-	// -1 on the first call). Also returns "pseudo" perpendiculars; see
-	// PerpType enum.
+	/*
+	 * Find perpendicular closest to xy, starting from span+1 so you can
+	 * call it repeatedly to check for multiple closest points (set span to
+	 * -1 on the first call). Also returns "pseudo" perpendiculars; see
+	 * PerpType enum.
+	 */
 	enum class PerpType {
-		None, // no perpendicular found
-		Start, // start of Pwl is closest point
-		End, // end of Pwl is closest point
-		Vertex, // vertex of Pwl is closest point
-		Perpendicular // true perpendicular found
+		None, /* no perpendicular found */
+		Start, /* start of Pwl is closest point */
+		End, /* end of Pwl is closest point */
+		Vertex, /* vertex of Pwl is closest point */
+		Perpendicular /* true perpendicular found */
 	};
 	PerpType invert(Point const &xy, Point &perp, int &span,
 			const double eps = 1e-6) const;
-	// Compute the inverse function. Indicate if it is a proper (true)
-	// inverse, or only a best effort (e.g. input was non-monotonic).
+	/*
+	 * Compute the inverse function. Indicate if it is a proper (true)
+	 * inverse, or only a best effort (e.g. input was non-monotonic).
+	 */
 	Pwl inverse(bool *trueInverse = nullptr, const double eps = 1e-6) const;
-	// Compose two Pwls together, doing "this" first and "other" after.
+	/* Compose two Pwls together, doing "this" first and "other" after. */
 	Pwl compose(Pwl const &other, const double eps = 1e-6) const;
-	// Apply function to (x,y) values at every control point.
+	/* Apply function to (x,y) values at every control point. */
 	void map(std::function<void(double x, double y)> f) const;
-	// Apply function to (x, y0, y1) values wherever either Pwl has a
-	// control point.
+	/*
+	 * Apply function to (x, y0, y1) values wherever either Pwl has a
+	 * control point.
+	 */
 	static void map2(Pwl const &pwl0, Pwl const &pwl1,
 			 std::function<void(double x, double y0, double y1)> f);
-	// Combine two Pwls, meaning we create a new Pwl where the y values are
-	// given by running f wherever either has a knot.
+	/*
+	 * Combine two Pwls, meaning we create a new Pwl where the y values are
+	 * given by running f wherever either has a knot.
+	 */
 	static Pwl
 	combine(Pwl const &pwl0, Pwl const &pwl1,
 		std::function<double(double x, double y0, double y1)> f,
 		const double eps = 1e-6);
-	// Make "this" match (at least) the given domain. Any extension my be
-	// clipped or linear.
+	/*
+	 * Make "this" match (at least) the given domain. Any extension my be
+	 * clipped or linear.
+	 */
 	void matchDomain(Interval const &domain, bool clip = true,
 			 const double eps = 1e-6);
 	Pwl &operator*=(double d);
@@ -111,4 +123,4 @@ private:
 	std::vector<Point> points_;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/rpi/agc.cpp b/src/ipa/raspberrypi/controller/rpi/agc.cpp
index 52a41a55..5a282a42 100644
--- a/src/ipa/raspberrypi/controller/rpi/agc.cpp
+++ b/src/ipa/raspberrypi/controller/rpi/agc.cpp
@@ -28,7 +28,7 @@ LOG_DEFINE_CATEGORY(RPiAgc)
 
 #define NAME "rpi.agc"
 
-#define PIPELINE_BITS 13 // seems to be a 13-bit pipeline
+#define PIPELINE_BITS 13 /* seems to be a 13-bit pipeline */
 
 void AgcMeteringMode::read(boost::property_tree::ptree const &params)
 {
@@ -150,7 +150,7 @@ void AgcConfig::read(boost::property_tree::ptree const &params)
 	convergenceFrames = params.get<unsigned int>("convergence_frames", 6);
 	fastReduceThreshold = params.get<double>("fast_reduce_threshold", 0.4);
 	baseEv = params.get<double>("base_ev", 1.0);
-	// Start with quite a low value as ramping up is easier than ramping down.
+	/* Start with quite a low value as ramping up is easier than ramping down. */
 	defaultExposureTime = params.get<double>("default_exposure_time", 1000) * 1us;
 	defaultAnalogueGain = params.get<double>("default_analogueGain", 1.0);
 }
@@ -170,8 +170,10 @@ Agc::Agc(Controller *controller)
 	  maxShutter_(0s), fixedShutter_(0s), fixedAnalogueGain_(0.0)
 {
 	memset(&awb_, 0, sizeof(awb_));
-	// Setting status_.totalExposureValue_ to zero initially tells us
-	// it's not been calculated yet (i.e. Process hasn't yet run).
+	/*
+	 * Setting status_.totalExposureValue_ to zero initially tells us
+	 * it's not been calculated yet (i.e. Process hasn't yet run).
+	 */
 	memset(&status_, 0, sizeof(status_));
 	status_.ev = ev_;
 }
@@ -185,16 +187,18 @@ void Agc::read(boost::property_tree::ptree const &params)
 {
 	LOG(RPiAgc, Debug) << "Agc";
 	config_.read(params);
-	// Set the config's defaults (which are the first ones it read) as our
-	// current modes, until someone changes them.  (they're all known to
-	// exist at this point)
+	/*
+	 * Set the config's defaults (which are the first ones it read) as our
+	 * current modes, until someone changes them.  (they're all known to
+	 * exist at this point)
+	 */
 	meteringModeName_ = config_.defaultMeteringMode;
 	meteringMode_ = &config_.meteringModes[meteringModeName_];
 	exposureModeName_ = config_.defaultExposureMode;
 	exposureMode_ = &config_.exposureModes[exposureModeName_];
 	constraintModeName_ = config_.defaultConstraintMode;
 	constraintMode_ = &config_.constraintModes[constraintModeName_];
-	// Set up the "last shutter/gain" values, in case AGC starts "disabled".
+	/* Set up the "last shutter/gain" values, in case AGC starts "disabled". */
 	status_.shutterTime = config_.defaultExposureTime;
 	status_.analogueGain = config_.defaultAnalogueGain;
 }
@@ -218,8 +222,10 @@ void Agc::resume()
 
 unsigned int Agc::getConvergenceFrames() const
 {
-	// If shutter and gain have been explicitly set, there is no
-	// convergence to happen, so no need to drop any frames - return zero.
+	/*
+	 * If shutter and gain have been explicitly set, there is no
+	 * convergence to happen, so no need to drop any frames - return zero.
+	 */
 	if (fixedShutter_ && fixedAnalogueGain_)
 		return 0;
 	else
@@ -244,14 +250,14 @@ void Agc::setMaxShutter(Duration maxShutter)
 void Agc::setFixedShutter(Duration fixedShutter)
 {
 	fixedShutter_ = fixedShutter;
-	// Set this in case someone calls Pause() straight after.
+	/* Set this in case someone calls Pause() straight after. */
 	status_.shutterTime = clipShutter(fixedShutter_);
 }
 
 void Agc::setFixedAnalogueGain(double fixedAnalogueGain)
 {
 	fixedAnalogueGain_ = fixedAnalogueGain;
-	// Set this in case someone calls Pause() straight after.
+	/* Set this in case someone calls Pause() straight after. */
 	status_.analogueGain = fixedAnalogueGain;
 }
 
@@ -280,30 +286,32 @@ void Agc::switchMode(CameraMode const &cameraMode,
 
 	Duration fixedShutter = clipShutter(fixedShutter_);
 	if (fixedShutter && fixedAnalogueGain_) {
-		// We're going to reset the algorithm here with these fixed values.
+		/* We're going to reset the algorithm here with these fixed values. */
 
 		fetchAwbStatus(metadata);
 		double minColourGain = std::min({ awb_.gainR, awb_.gainG, awb_.gainB, 1.0 });
 		ASSERT(minColourGain != 0.0);
 
-		// This is the equivalent of computeTargetExposure and applyDigitalGain.
+		/* This is the equivalent of computeTargetExposure and applyDigitalGain. */
 		target_.totalExposureNoDG = fixedShutter_ * fixedAnalogueGain_;
 		target_.totalExposure = target_.totalExposureNoDG / minColourGain;
 
-		// Equivalent of filterExposure. This resets any "history".
+		/* Equivalent of filterExposure. This resets any "history". */
 		filtered_ = target_;
 
-		// Equivalent of divideUpExposure.
+		/* Equivalent of divideUpExposure. */
 		filtered_.shutter = fixedShutter;
 		filtered_.analogueGain = fixedAnalogueGain_;
 	} else if (status_.totalExposureValue) {
-		// On a mode switch, various things could happen:
-		// - the exposure profile might change
-		// - a fixed exposure or gain might be set
-		// - the new mode's sensitivity might be different
-		// We cope with the last of these by scaling the target values. After
-		// that we just need to re-divide the exposure/gain according to the
-		// current exposure profile, which takes care of everything else.
+		/*
+		 * On a mode switch, various things could happen:
+		 * - the exposure profile might change
+		 * - a fixed exposure or gain might be set
+		 * - the new mode's sensitivity might be different
+		 * We cope with the last of these by scaling the target values. After
+		 * that we just need to re-divide the exposure/gain according to the
+		 * current exposure profile, which takes care of everything else.
+		 */
 
 		double ratio = lastSensitivity_ / cameraMode.sensitivity;
 		target_.totalExposureNoDG *= ratio;
@@ -313,29 +321,31 @@ void Agc::switchMode(CameraMode const &cameraMode,
 
 		divideUpExposure();
 	} else {
-		// We come through here on startup, when at least one of the shutter
-		// or gain has not been fixed. We must still write those values out so
-		// that they will be applied immediately. We supply some arbitrary defaults
-		// for any that weren't set.
-
-		// Equivalent of divideUpExposure.
+		/*
+		 * We come through here on startup, when at least one of the shutter
+		 * or gain has not been fixed. We must still write those values out so
+		 * that they will be applied immediately. We supply some arbitrary defaults
+		 * for any that weren't set.
+		 */
+
+		/* Equivalent of divideUpExposure. */
 		filtered_.shutter = fixedShutter ? fixedShutter : config_.defaultExposureTime;
 		filtered_.analogueGain = fixedAnalogueGain_ ? fixedAnalogueGain_ : config_.defaultAnalogueGain;
 	}
 
 	writeAndFinish(metadata, false);
 
-	// We must remember the sensitivity of this mode for the next SwitchMode.
+	/* We must remember the sensitivity of this mode for the next SwitchMode. */
 	lastSensitivity_ = cameraMode.sensitivity;
 }
 
 void Agc::prepare(Metadata *imageMetadata)
 {
 	status_.digitalGain = 1.0;
-	fetchAwbStatus(imageMetadata); // always fetch it so that Process knows it's been done
+	fetchAwbStatus(imageMetadata); /* always fetch it so that Process knows it's been done */
 
 	if (status_.totalExposureValue) {
-		// Process has run, so we have meaningful values.
+		/* Process has run, so we have meaningful values. */
 		DeviceStatus deviceStatus;
 		if (imageMetadata->get("device.status", deviceStatus) == 0) {
 			Duration actualExposure = deviceStatus.shutterSpeed *
@@ -343,14 +353,16 @@ void Agc::prepare(Metadata *imageMetadata)
 			if (actualExposure) {
 				status_.digitalGain = status_.totalExposureValue / actualExposure;
 				LOG(RPiAgc, Debug) << "Want total exposure " << status_.totalExposureValue;
-				// Never ask for a gain < 1.0, and also impose
-				// some upper limit. Make it customisable?
+				/*
+				 * Never ask for a gain < 1.0, and also impose
+				 * some upper limit. Make it customisable?
+				 */
 				status_.digitalGain = std::max(1.0, std::min(status_.digitalGain, 4.0));
 				LOG(RPiAgc, Debug) << "Actual exposure " << actualExposure;
 				LOG(RPiAgc, Debug) << "Use digitalGain " << status_.digitalGain;
 				LOG(RPiAgc, Debug) << "Effective exposure "
 						   << actualExposure * status_.digitalGain;
-				// Decide whether AEC/AGC has converged.
+				/* Decide whether AEC/AGC has converged. */
 				updateLockStatus(deviceStatus);
 			}
 		} else
@@ -362,44 +374,52 @@ void Agc::prepare(Metadata *imageMetadata)
 void Agc::process(StatisticsPtr &stats, Metadata *imageMetadata)
 {
 	frameCount_++;
-	// First a little bit of housekeeping, fetching up-to-date settings and
-	// configuration, that kind of thing.
+	/*
+	 * First a little bit of housekeeping, fetching up-to-date settings and
+	 * configuration, that kind of thing.
+	 */
 	housekeepConfig();
-	// Get the current exposure values for the frame that's just arrived.
+	/* Get the current exposure values for the frame that's just arrived. */
 	fetchCurrentExposure(imageMetadata);
-	// Compute the total gain we require relative to the current exposure.
+	/* Compute the total gain we require relative to the current exposure. */
 	double gain, targetY;
 	computeGain(stats.get(), imageMetadata, gain, targetY);
-	// Now compute the target (final) exposure which we think we want.
+	/* Now compute the target (final) exposure which we think we want. */
 	computeTargetExposure(gain);
-	// Some of the exposure has to be applied as digital gain, so work out
-	// what that is. This function also tells us whether it's decided to
-	// "desaturate" the image more quickly.
+	/*
+	 * Some of the exposure has to be applied as digital gain, so work out
+	 * what that is. This function also tells us whether it's decided to
+	 * "desaturate" the image more quickly.
+	 */
 	bool desaturate = applyDigitalGain(gain, targetY);
-	// The results have to be filtered so as not to change too rapidly.
+	/* The results have to be filtered so as not to change too rapidly. */
 	filterExposure(desaturate);
-	// The last thing is to divide up the exposure value into a shutter time
-	// and analogue gain, according to the current exposure mode.
+	/*
+	 * The last thing is to divide up the exposure value into a shutter time
+	 * and analogue gain, according to the current exposure mode.
+	 */
 	divideUpExposure();
-	// Finally advertise what we've done.
+	/* Finally advertise what we've done. */
 	writeAndFinish(imageMetadata, desaturate);
 }
 
 void Agc::updateLockStatus(DeviceStatus const &deviceStatus)
 {
-	const double errorFactor = 0.10; // make these customisable?
+	const double errorFactor = 0.10; /* make these customisable? */
 	const int maxLockCount = 5;
-	// Reset "lock count" when we exceed this multiple of errorFactor
+	/* Reset "lock count" when we exceed this multiple of errorFactor */
 	const double resetMargin = 1.5;
 
-	// Add 200us to the exposure time error to allow for line quantisation.
+	/* Add 200us to the exposure time error to allow for line quantisation. */
 	Duration exposureError = lastDeviceStatus_.shutterSpeed * errorFactor + 200us;
 	double gainError = lastDeviceStatus_.analogueGain * errorFactor;
 	Duration targetError = lastTargetExposure_ * errorFactor;
 
-	// Note that we don't know the exposure/gain limits of the sensor, so
-	// the values we keep requesting may be unachievable. For this reason
-	// we only insist that we're close to values in the past few frames.
+	/*
+	 * Note that we don't know the exposure/gain limits of the sensor, so
+	 * the values we keep requesting may be unachievable. For this reason
+	 * we only insist that we're close to values in the past few frames.
+	 */
 	if (deviceStatus.shutterSpeed > lastDeviceStatus_.shutterSpeed - exposureError &&
 	    deviceStatus.shutterSpeed < lastDeviceStatus_.shutterSpeed + exposureError &&
 	    deviceStatus.analogueGain > lastDeviceStatus_.analogueGain - gainError &&
@@ -430,7 +450,7 @@ static void copyString(std::string const &s, char *d, size_t size)
 
 void Agc::housekeepConfig()
 {
-	// First fetch all the up-to-date settings, so no one else has to do it.
+	/* First fetch all the up-to-date settings, so no one else has to do it. */
 	status_.ev = ev_;
 	status_.fixedShutter = clipShutter(fixedShutter_);
 	status_.fixedAnalogueGain = fixedAnalogueGain_;
@@ -438,8 +458,10 @@ void Agc::housekeepConfig()
 	LOG(RPiAgc, Debug) << "ev " << status_.ev << " fixedShutter "
 			   << status_.fixedShutter << " fixedAnalogueGain "
 			   << status_.fixedAnalogueGain;
-	// Make sure the "mode" pointers point to the up-to-date things, if
-	// they've changed.
+	/*
+	 * Make sure the "mode" pointers point to the up-to-date things, if
+	 * they've changed.
+	 */
 	if (strcmp(meteringModeName_.c_str(), status_.meteringMode)) {
 		auto it = config_.meteringModes.find(meteringModeName_);
 		if (it == config_.meteringModes.end())
@@ -491,7 +513,7 @@ void Agc::fetchCurrentExposure(Metadata *imageMetadata)
 
 void Agc::fetchAwbStatus(Metadata *imageMetadata)
 {
-	awb_.gainR = 1.0; // in case not found in metadata
+	awb_.gainR = 1.0; /* in case not found in metadata */
 	awb_.gainG = 1.0;
 	awb_.gainB = 1.0;
 	if (imageMetadata->get("awb.status", awb_) != 0)
@@ -502,8 +524,10 @@ static double computeInitialY(bcm2835_isp_stats *stats, AwbStatus const &awb,
 			      double weights[], double gain)
 {
 	bcm2835_isp_stats_region *regions = stats->agc_stats;
-	// Note how the calculation below means that equal weights give you
-	// "average" metering (i.e. all pixels equally important).
+	/*
+	 * Note how the calculation below means that equal weights give you
+	 * "average" metering (i.e. all pixels equally important).
+	 */
 	double rSum = 0, gSum = 0, bSum = 0, pixelSum = 0;
 	for (int i = 0; i < AGC_STATS_SIZE; i++) {
 		double counted = regions[i].counted;
@@ -525,11 +549,13 @@ static double computeInitialY(bcm2835_isp_stats *stats, AwbStatus const &awb,
 	return ySum / pixelSum / (1 << PIPELINE_BITS);
 }
 
-// We handle extra gain through EV by adjusting our Y targets. However, you
-// simply can't monitor histograms once they get very close to (or beyond!)
-// saturation, so we clamp the Y targets to this value. It does mean that EV
-// increases don't necessarily do quite what you might expect in certain
-// (contrived) cases.
+/*
+ * We handle extra gain through EV by adjusting our Y targets. However, you
+ * simply can't monitor histograms once they get very close to (or beyond!)
+ * saturation, so we clamp the Y targets to this value. It does mean that EV
+ * increases don't necessarily do quite what you might expect in certain
+ * (contrived) cases.
+ */
 
 #define EV_GAIN_Y_TARGET_LIMIT 0.9
 
@@ -546,18 +572,22 @@ void Agc::computeGain(bcm2835_isp_stats *statistics, Metadata *imageMetadata,
 		      double &gain, double &targetY)
 {
 	struct LuxStatus lux = {};
-	lux.lux = 400; // default lux level to 400 in case no metadata found
+	lux.lux = 400; /* default lux level to 400 in case no metadata found */
 	if (imageMetadata->get("lux.status", lux) != 0)
 		LOG(RPiAgc, Warning) << "Agc: no lux level found";
 	Histogram h(statistics->hist[0].g_hist, NUM_HISTOGRAM_BINS);
 	double evGain = status_.ev * config_.baseEv;
-	// The initial gain and target_Y come from some of the regions. After
-	// that we consider the histogram constraints.
+	/*
+	 * The initial gain and target_Y come from some of the regions. After
+	 * that we consider the histogram constraints.
+	 */
 	targetY = config_.yTarget.eval(config_.yTarget.domain().clip(lux.lux));
 	targetY = std::min(EV_GAIN_Y_TARGET_LIMIT, targetY * evGain);
 
-	// Do this calculation a few times as brightness increase can be
-	// non-linear when there are saturated regions.
+	/*
+	 * Do this calculation a few times as brightness increase can be
+	 * non-linear when there are saturated regions.
+	 */
 	gain = 1.0;
 	for (int i = 0; i < 8; i++) {
 		double initialY = computeInitialY(statistics, awb_, meteringMode_->weights, gain);
@@ -565,7 +595,7 @@ void Agc::computeGain(bcm2835_isp_stats *statistics, Metadata *imageMetadata,
 		gain *= extraGain;
 		LOG(RPiAgc, Debug) << "Initial Y " << initialY << " target " << targetY
 				   << " gives gain " << gain;
-		if (extraGain < 1.01) // close enough
+		if (extraGain < 1.01) /* close enough */
 			break;
 	}
 
@@ -592,20 +622,23 @@ void Agc::computeGain(bcm2835_isp_stats *statistics, Metadata *imageMetadata,
 void Agc::computeTargetExposure(double gain)
 {
 	if (status_.fixedShutter && status_.fixedAnalogueGain) {
-		// When ag and shutter are both fixed, we need to drive the
-		// total exposure so that we end up with a digital gain of at least
-		// 1/minColourGain. Otherwise we'd desaturate channels causing
-		// white to go cyan or magenta.
+		/*
+		 * When ag and shutter are both fixed, we need to drive the
+		 * total exposure so that we end up with a digital gain of at least
+		 * 1/minColourGain. Otherwise we'd desaturate channels causing
+		 * white to go cyan or magenta.
+		 */
 		double minColourGain = std::min({ awb_.gainR, awb_.gainG, awb_.gainB, 1.0 });
 		ASSERT(minColourGain != 0.0);
 		target_.totalExposure =
 			status_.fixedShutter * status_.fixedAnalogueGain / minColourGain;
 	} else {
-		// The statistics reflect the image without digital gain, so the final
-		// total exposure we're aiming for is:
+		/*
+		 * The statistics reflect the image without digital gain, so the final
+		 * total exposure we're aiming for is:
+		 */
 		target_.totalExposure = current_.totalExposureNoDG * gain;
-		// The final target exposure is also limited to what the exposure
-		// mode allows.
+		/* The final target exposure is also limited to what the exposure mode allows. */
 		Duration maxShutter = status_.fixedShutter
 					      ? status_.fixedShutter
 					      : exposureMode_->shutter.back();
@@ -625,17 +658,21 @@ bool Agc::applyDigitalGain(double gain, double targetY)
 	double minColourGain = std::min({ awb_.gainR, awb_.gainG, awb_.gainB, 1.0 });
 	ASSERT(minColourGain != 0.0);
 	double dg = 1.0 / minColourGain;
-	// I think this pipeline subtracts black level and rescales before we
-	// get the stats, so no need to worry about it.
+	/*
+	 * I think this pipeline subtracts black level and rescales before we
+	 * get the stats, so no need to worry about it.
+	 */
 	LOG(RPiAgc, Debug) << "after AWB, target dg " << dg << " gain " << gain
 			   << " target_Y " << targetY;
-	// Finally, if we're trying to reduce exposure but the target_Y is
-	// "close" to 1.0, then the gain computed for that constraint will be
-	// only slightly less than one, because the measured Y can never be
-	// larger than 1.0. When this happens, demand a large digital gain so
-	// that the exposure can be reduced, de-saturating the image much more
-	// quickly (and we then approach the correct value more quickly from
-	// below).
+	/*
+	 * Finally, if we're trying to reduce exposure but the target_Y is
+	 * "close" to 1.0, then the gain computed for that constraint will be
+	 * only slightly less than one, because the measured Y can never be
+	 * larger than 1.0. When this happens, demand a large digital gain so
+	 * that the exposure can be reduced, de-saturating the image much more
+	 * quickly (and we then approach the correct value more quickly from
+	 * below).
+	 */
 	bool desaturate = targetY > config_.fastReduceThreshold &&
 			  gain < sqrt(targetY);
 	if (desaturate)
@@ -649,8 +686,10 @@ bool Agc::applyDigitalGain(double gain, double targetY)
 void Agc::filterExposure(bool desaturate)
 {
 	double speed = config_.speed;
-	// AGC adapts instantly if both shutter and gain are directly specified
-	// or we're in the startup phase.
+	/*
+	 * AGC adapts instantly if both shutter and gain are directly specified
+	 * or we're in the startup phase.
+	 */
 	if ((status_.fixedShutter && status_.fixedAnalogueGain) ||
 	    frameCount_ <= config_.startupFrames)
 		speed = 1.0;
@@ -658,15 +697,19 @@ void Agc::filterExposure(bool desaturate)
 		filtered_.totalExposure = target_.totalExposure;
 		filtered_.totalExposureNoDG = target_.totalExposureNoDG;
 	} else {
-		// If close to the result go faster, to save making so many
-		// micro-adjustments on the way. (Make this customisable?)
+		/*
+		 * If close to the result go faster, to save making so many
+		 * micro-adjustments on the way. (Make this customisable?)
+		 */
 		if (filtered_.totalExposure < 1.2 * target_.totalExposure &&
 		    filtered_.totalExposure > 0.8 * target_.totalExposure)
 			speed = sqrt(speed);
 		filtered_.totalExposure = speed * target_.totalExposure +
 					  filtered_.totalExposure * (1.0 - speed);
-		// When desaturing, take a big jump down in totalExposureNoDG,
-		// which we'll hide with digital gain.
+		/*
+		 * When desaturing, take a big jump down in totalExposureNoDG,
+		 * which we'll hide with digital gain.
+		 */
 		if (desaturate)
 			filtered_.totalExposureNoDG =
 				target_.totalExposureNoDG;
@@ -675,9 +718,11 @@ void Agc::filterExposure(bool desaturate)
 				speed * target_.totalExposureNoDG +
 				filtered_.totalExposureNoDG * (1.0 - speed);
 	}
-	// We can't let the totalExposureNoDG exposure deviate too far below the
-	// total exposure, as there might not be enough digital gain available
-	// in the ISP to hide it (which will cause nasty oscillation).
+	/*
+	 * We can't let the totalExposureNoDG exposure deviate too far below the
+	 * total exposure, as there might not be enough digital gain available
+	 * in the ISP to hide it (which will cause nasty oscillation).
+	 */
 	if (filtered_.totalExposureNoDG <
 	    filtered_.totalExposure * config_.fastReduceThreshold)
 		filtered_.totalExposureNoDG = filtered_.totalExposure * config_.fastReduceThreshold;
@@ -687,9 +732,11 @@ void Agc::filterExposure(bool desaturate)
 
 void Agc::divideUpExposure()
 {
-	// Sending the fixed shutter/gain cases through the same code may seem
-	// unnecessary, but it will make more sense when extend this to cover
-	// variable aperture.
+	/*
+	 * Sending the fixed shutter/gain cases through the same code may seem
+	 * unnecessary, but it will make more sense when extend this to cover
+	 * variable aperture.
+	 */
 	Duration exposureValue = filtered_.totalExposureNoDG;
 	Duration shutterTime;
 	double analogueGain;
@@ -721,18 +768,22 @@ void Agc::divideUpExposure()
 	}
 	LOG(RPiAgc, Debug) << "Divided up shutter and gain are " << shutterTime << " and "
 			   << analogueGain;
-	// Finally adjust shutter time for flicker avoidance (require both
-	// shutter and gain not to be fixed).
+	/*
+	 * Finally adjust shutter time for flicker avoidance (require both
+	 * shutter and gain not to be fixed).
+	 */
 	if (!status_.fixedShutter && !status_.fixedAnalogueGain &&
 	    status_.flickerPeriod) {
 		int flickerPeriods = shutterTime / status_.flickerPeriod;
 		if (flickerPeriods) {
 			Duration newShutterTime = flickerPeriods * status_.flickerPeriod;
 			analogueGain *= shutterTime / newShutterTime;
-			// We should still not allow the ag to go over the
-			// largest value in the exposure mode. Note that this
-			// may force more of the total exposure into the digital
-			// gain as a side-effect.
+			/*
+			 * We should still not allow the ag to go over the
+			 * largest value in the exposure mode. Note that this
+			 * may force more of the total exposure into the digital
+			 * gain as a side-effect.
+			 */
 			analogueGain = std::min(analogueGain, exposureMode_->gain.back());
 			shutterTime = newShutterTime;
 		}
@@ -749,8 +800,10 @@ void Agc::writeAndFinish(Metadata *imageMetadata, bool desaturate)
 	status_.targetExposureValue = desaturate ? 0s : target_.totalExposureNoDG;
 	status_.shutterTime = filtered_.shutter;
 	status_.analogueGain = filtered_.analogueGain;
-	// Write to metadata as well, in case anyone wants to update the camera
-	// immediately.
+	/*
+	 * Write to metadata as well, in case anyone wants to update the camera
+	 * immediately.
+	 */
 	imageMetadata->set("agc.status", status_);
 	LOG(RPiAgc, Debug) << "Output written, total exposure requested is "
 			   << filtered_.totalExposure;
@@ -765,7 +818,7 @@ Duration Agc::clipShutter(Duration shutter)
 	return shutter;
 }
 
-// Register algorithm with the system.
+/* Register algorithm with the system. */
 static Algorithm *create(Controller *controller)
 {
 	return (Algorithm *)new Agc(controller);
diff --git a/src/ipa/raspberrypi/controller/rpi/agc.hpp b/src/ipa/raspberrypi/controller/rpi/agc.hpp
index 4ed7293b..c2d68b60 100644
--- a/src/ipa/raspberrypi/controller/rpi/agc.hpp
+++ b/src/ipa/raspberrypi/controller/rpi/agc.hpp
@@ -15,10 +15,12 @@
 #include "../agc_status.h"
 #include "../pwl.hpp"
 
-// This is our implementation of AGC.
+/* This is our implementation of AGC. */
 
-// This is the number actually set up by the firmware, not the maximum possible
-// number (which is 16).
+/*
+ * This is the number actually set up by the firmware, not the maximum possible
+ * number (which is 16).
+ */
 
 #define AGC_STATS_SIZE 15
 
@@ -73,7 +75,7 @@ public:
 	Agc(Controller *controller);
 	char const *name() const override;
 	void read(boost::property_tree::ptree const &params) override;
-	// AGC handles "pausing" for itself.
+	/* AGC handles "pausing" for itself. */
 	bool isPaused() const override;
 	void pause() override;
 	void resume() override;
@@ -115,17 +117,17 @@ private:
 		libcamera::utils::Duration shutter;
 		double analogueGain;
 		libcamera::utils::Duration totalExposure;
-		libcamera::utils::Duration totalExposureNoDG; // without digital gain
+		libcamera::utils::Duration totalExposureNoDG; /* without digital gain */
 	};
-	ExposureValues current_;  // values for the current frame
-	ExposureValues target_;   // calculate the values we want here
-	ExposureValues filtered_; // these values are filtered towards target
+	ExposureValues current_;  /* values for the current frame */
+	ExposureValues target_;   /* calculate the values we want here */
+	ExposureValues filtered_; /* these values are filtered towards target */
 	AgcStatus status_;
 	int lockCount_;
 	DeviceStatus lastDeviceStatus_;
 	libcamera::utils::Duration lastTargetExposure_;
-	double lastSensitivity_; // sensitivity of the previous camera mode
-	// Below here the "settings" that applications can change.
+	double lastSensitivity_; /* sensitivity of the previous camera mode */
+	/* Below here the "settings" that applications can change. */
 	std::string meteringModeName_;
 	std::string exposureModeName_;
 	std::string constraintModeName_;
@@ -136,4 +138,4 @@ private:
 	double fixedAnalogueGain_;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/rpi/alsc.cpp b/src/ipa/raspberrypi/controller/rpi/alsc.cpp
index 98b77154..6fd95a31 100644
--- a/src/ipa/raspberrypi/controller/rpi/alsc.cpp
+++ b/src/ipa/raspberrypi/controller/rpi/alsc.cpp
@@ -14,7 +14,7 @@
 #include "../awb_status.h"
 #include "alsc.hpp"
 
-// Raspberry Pi ALSC (Auto Lens Shading Correction) algorithm.
+/* Raspberry Pi ALSC (Auto Lens Shading Correction) algorithm. */
 
 using namespace RPiController;
 using namespace libcamera;
@@ -68,7 +68,7 @@ static void generateLut(double *lut, boost::property_tree::ptree const &params)
 			double r2 = (dx * dx + dy * dy) / R2;
 			lut[num++] =
 				(f1 * r2 + f2) * (f1 * r2 + f2) /
-				(f2 * f2); // this reproduces the cos^4 rule
+				(f2 * f2); /* this reproduces the cos^4 rule */
 		}
 	}
 }
@@ -171,7 +171,7 @@ void Alsc::initialise()
 	frameCount2_ = frameCount_ = framePhase_ = 0;
 	firstTime_ = true;
 	ct_ = config_.defaultCt;
-	// The lambdas are initialised in the SwitchMode.
+	/* The lambdas are initialised in the SwitchMode. */
 }
 
 void Alsc::waitForAysncThread()
@@ -188,8 +188,10 @@ void Alsc::waitForAysncThread()
 
 static bool compareModes(CameraMode const &cm0, CameraMode const &cm1)
 {
-	// Return true if the modes crop from the sensor significantly differently,
-	// or if the user transform has changed.
+	/*
+	 * Return true if the modes crop from the sensor significantly differently,
+	 * or if the user transform has changed.
+	 */
 	if (cm0.transform != cm1.transform)
 		return true;
 	int leftDiff = abs(cm0.cropX - cm1.cropX);
@@ -198,9 +200,11 @@ static bool compareModes(CameraMode const &cm0, CameraMode const &cm1)
 			     cm1.cropX - cm1.scaleX * cm1.width);
 	int bottomDiff = fabs(cm0.cropY + cm0.scaleY * cm0.height -
 			      cm1.cropY - cm1.scaleY * cm1.height);
-	// These thresholds are a rather arbitrary amount chosen to trigger
-	// when carrying on with the previously calculated tables might be
-	// worse than regenerating them (but without the adaptive algorithm).
+	/*
+	 * These thresholds are a rather arbitrary amount chosen to trigger
+	 * when carrying on with the previously calculated tables might be
+	 * worse than regenerating them (but without the adaptive algorithm).
+	 */
 	int thresholdX = cm0.sensorWidth >> 4;
 	int thresholdY = cm0.sensorHeight >> 4;
 	return leftDiff > thresholdX || rightDiff > thresholdX ||
@@ -210,28 +214,34 @@ static bool compareModes(CameraMode const &cm0, CameraMode const &cm1)
 void Alsc::switchMode(CameraMode const &cameraMode,
 		      [[maybe_unused]] Metadata *metadata)
 {
-	// We're going to start over with the tables if there's any "significant"
-	// change.
+	/*
+	 * We're going to start over with the tables if there's any "significant"
+	 * change.
+	 */
 	bool resetTables = firstTime_ || compareModes(cameraMode_, cameraMode);
 
-	// Believe the colour temperature from the AWB, if there is one.
+	/* Believe the colour temperature from the AWB, if there is one. */
 	ct_ = getCt(metadata, ct_);
 
-	// Ensure the other thread isn't running while we do this.
+	/* Ensure the other thread isn't running while we do this. */
 	waitForAysncThread();
 
 	cameraMode_ = cameraMode;
 
-	// We must resample the luminance table like we do the others, but it's
-	// fixed so we can simply do it up front here.
+	/*
+	 * We must resample the luminance table like we do the others, but it's
+	 * fixed so we can simply do it up front here.
+	 */
 	resampleCalTable(config_.luminanceLut, cameraMode_, luminanceTable_);
 
 	if (resetTables) {
-		// Upon every "table reset", arrange for something sensible to be
-		// generated. Construct the tables for the previous recorded colour
-		// temperature. In order to start over from scratch we initialise
-		// the lambdas, but the rest of this code then echoes the code in
-		// doAlsc, without the adaptive algorithm.
+		/*
+		 * Upon every "table reset", arrange for something sensible to be
+		 * generated. Construct the tables for the previous recorded colour
+		 * temperature. In order to start over from scratch we initialise
+		 * the lambdas, but the rest of this code then echoes the code in
+		 * doAlsc, without the adaptive algorithm.
+		 */
 		for (int i = 0; i < XY; i++)
 			lambdaR_[i] = lambdaB_[i] = 1.0;
 		double calTableR[XY], calTableB[XY], calTableTmp[XY];
@@ -244,7 +254,7 @@ void Alsc::switchMode(CameraMode const &cameraMode,
 		addLuminanceToTables(syncResults_, asyncLambdaR_, 1.0, asyncLambdaB_,
 				     luminanceTable_, config_.luminanceStrength);
 		memcpy(prevSyncResults_, syncResults_, sizeof(prevSyncResults_));
-		framePhase_ = config_.framePeriod; // run the algo again asap
+		framePhase_ = config_.framePeriod; /* run the algo again asap */
 		firstTime_ = false;
 	}
 }
@@ -260,7 +270,7 @@ void Alsc::fetchAsyncResults()
 double getCt(Metadata *metadata, double defaultCt)
 {
 	AwbStatus awbStatus;
-	awbStatus.temperatureK = defaultCt; // in case nothing found
+	awbStatus.temperatureK = defaultCt; /* in case nothing found */
 	if (metadata->get("awb.status", awbStatus) != 0)
 		LOG(RPiAlsc, Debug) << "no AWB results found, using "
 				    << awbStatus.temperatureK;
@@ -282,18 +292,22 @@ static void copyStats(bcm2835_isp_stats_region regions[XY], StatisticsPtr &stats
 		regions[i].g_sum = inputRegions[i].g_sum / gTable[i];
 		regions[i].b_sum = inputRegions[i].b_sum / bTable[i];
 		regions[i].counted = inputRegions[i].counted;
-		// (don't care about the uncounted value)
+		/* (don't care about the uncounted value) */
 	}
 }
 
 void Alsc::restartAsync(StatisticsPtr &stats, Metadata *imageMetadata)
 {
 	LOG(RPiAlsc, Debug) << "Starting ALSC calculation";
-	// Get the current colour temperature. It's all we need from the
-	// metadata. Default to the last CT value (which could be the default).
+	/*
+	 * Get the current colour temperature. It's all we need from the
+	 * metadata. Default to the last CT value (which could be the default).
+	 */
 	ct_ = getCt(imageMetadata, ct_);
-	// We have to copy the statistics here, dividing out our best guess of
-	// the LSC table that the pipeline applied to them.
+	/*
+	 * We have to copy the statistics here, dividing out our best guess of
+	 * the LSC table that the pipeline applied to them.
+	 */
 	AlscStatus alscStatus;
 	if (imageMetadata->get("alsc.status", alscStatus) != 0) {
 		LOG(RPiAlsc, Warning)
@@ -317,8 +331,10 @@ void Alsc::restartAsync(StatisticsPtr &stats, Metadata *imageMetadata)
 
 void Alsc::prepare(Metadata *imageMetadata)
 {
-	// Count frames since we started, and since we last poked the async
-	// thread.
+	/*
+	 * Count frames since we started, and since we last poked the async
+	 * thread.
+	 */
 	if (frameCount_ < (int)config_.startupFrames)
 		frameCount_++;
 	double speed = frameCount_ < (int)config_.startupFrames
@@ -331,12 +347,12 @@ void Alsc::prepare(Metadata *imageMetadata)
 		if (asyncStarted_ && asyncFinished_)
 			fetchAsyncResults();
 	}
-	// Apply IIR filter to results and program into the pipeline.
+	/* Apply IIR filter to results and program into the pipeline. */
 	double *ptr = (double *)syncResults_,
 	       *pptr = (double *)prevSyncResults_;
 	for (unsigned int i = 0; i < sizeof(syncResults_) / sizeof(double); i++)
 		pptr[i] = speed * ptr[i] + (1.0 - speed) * pptr[i];
-	// Put output values into status metadata.
+	/* Put output values into status metadata. */
 	AlscStatus status;
 	memcpy(status.r, prevSyncResults_[0], sizeof(status.r));
 	memcpy(status.g, prevSyncResults_[1], sizeof(status.g));
@@ -346,8 +362,10 @@ void Alsc::prepare(Metadata *imageMetadata)
 
 void Alsc::process(StatisticsPtr &stats, Metadata *imageMetadata)
 {
-	// Count frames since we started, and since we last poked the async
-	// thread.
+	/*
+	 * Count frames since we started, and since we last poked the async
+	 * thread.
+	 */
 	if (framePhase_ < (int)config_.framePeriod)
 		framePhase_++;
 	if (frameCount2_ < (int)config_.startupFrames)
@@ -415,8 +433,10 @@ void getCalTable(double ct, std::vector<AlscCalibration> const &calibrations,
 void resampleCalTable(double const calTableIn[XY],
 		      CameraMode const &cameraMode, double calTableOut[XY])
 {
-	// Precalculate and cache the x sampling locations and phases to save
-	// recomputing them on every row.
+	/*
+	 * Precalculate and cache the x sampling locations and phases to save
+	 * recomputing them on every row.
+	 */
 	int xLo[X], xHi[X];
 	double xf[X];
 	double scaleX = cameraMode.sensorWidth /
@@ -434,7 +454,7 @@ void resampleCalTable(double const calTableIn[XY],
 			xHi[i] = X - 1 - xHi[i];
 		}
 	}
-	// Now march over the output table generating the new values.
+	/* Now march over the output table generating the new values. */
 	double scaleY = cameraMode.sensorHeight /
 			(cameraMode.height * cameraMode.scaleY);
 	double yOff = cameraMode.cropY / (double)cameraMode.sensorHeight;
@@ -461,7 +481,7 @@ void resampleCalTable(double const calTableIn[XY],
 	}
 }
 
-// Calculate chrominance statistics (R/G and B/G) for each region.
+/* Calculate chrominance statistics (R/G and B/G) for each region. */
 static_assert(XY == AWB_REGIONS, "ALSC/AWB statistics region mismatch");
 static void calculateCrCb(bcm2835_isp_stats_region *awbRegion, double cr[XY],
 			  double cb[XY], uint32_t minCount, uint16_t minG)
@@ -512,8 +532,10 @@ void compensateLambdasForCal(double const calTable[XY],
 	printf("]\n");
 }
 
-// Compute weight out of 1.0 which reflects how similar we wish to make the
-// colours of these two regions.
+/*
+ * Compute weight out of 1.0 which reflects how similar we wish to make the
+ * colours of these two regions.
+ */
 static double computeWeight(double Ci, double Cj, double sigma)
 {
 	if (Ci == InsufficientData || Cj == InsufficientData)
@@ -522,11 +544,11 @@ static double computeWeight(double Ci, double Cj, double sigma)
 	return exp(-diff * diff / 2);
 }
 
-// Compute all weights.
+/* Compute all weights. */
 static void computeW(double const C[XY], double sigma, double W[XY][4])
 {
 	for (int i = 0; i < XY; i++) {
-		// Start with neighbour above and go clockwise.
+		/* Start with neighbour above and go clockwise. */
 		W[i][0] = i >= X ? computeWeight(C[i], C[i - X], sigma) : 0;
 		W[i][1] = i % X < X - 1 ? computeWeight(C[i], C[i + 1], sigma) : 0;
 		W[i][2] = i < XY - X ? computeWeight(C[i], C[i + X], sigma) : 0;
@@ -534,17 +556,19 @@ static void computeW(double const C[XY], double sigma, double W[XY][4])
 	}
 }
 
-// Compute M, the large but sparse matrix such that M * lambdas = 0.
+/* Compute M, the large but sparse matrix such that M * lambdas = 0. */
 static void constructM(double const C[XY], double const W[XY][4],
 		       double M[XY][4])
 {
 	double epsilon = 0.001;
 	for (int i = 0; i < XY; i++) {
-		// Note how, if C[i] == INSUFFICIENT_DATA, the weights will all
-		// be zero so the equation is still set up correctly.
+		/*
+		 * Note how, if C[i] == INSUFFICIENT_DATA, the weights will all
+		 * be zero so the equation is still set up correctly.
+		 */
 		int m = !!(i >= X) + !!(i % X < X - 1) + !!(i < XY - X) +
-			!!(i % X); // total number of neighbours
-		// we'll divide the diagonal out straight away
+			!!(i % X); /* total number of neighbours */
+		/* we'll divide the diagonal out straight away */
 		double diagonal = (epsilon + W[i][0] + W[i][1] + W[i][2] + W[i][3]) * C[i];
 		M[i][0] = i >= X ? (W[i][0] * C[i - X] + epsilon / m * C[i]) / diagonal : 0;
 		M[i][1] = i % X < X - 1 ? (W[i][1] * C[i + 1] + epsilon / m * C[i]) / diagonal : 0;
@@ -553,9 +577,11 @@ static void constructM(double const C[XY], double const W[XY][4],
 	}
 }
 
-// In the compute_lambda_ functions, note that the matrix coefficients for the
-// left/right neighbours are zero down the left/right edges, so we don't need
-// need to test the i value to exclude them.
+/*
+ * In the compute_lambda_ functions, note that the matrix coefficients for the
+ * left/right neighbours are zero down the left/right edges, so we don't need
+ * need to test the i value to exclude them.
+ */
 static double computeLambdaBottom(int i, double const M[XY][4],
 				  double lambda[XY])
 {
@@ -585,7 +611,7 @@ static double computeLambdaTopEnd(int i, double const M[XY][4],
 	return M[i][0] * lambda[i - X] + M[i][3] * lambda[i - 1];
 }
 
-// Gauss-Seidel iteration with over-relaxation.
+/* Gauss-Seidel iteration with over-relaxation. */
 static double gaussSeidel2Sor(double const M[XY][4], double omega,
 			      double lambda[XY], double lambdaBound)
 {
@@ -610,8 +636,10 @@ static double gaussSeidel2Sor(double const M[XY][4], double omega,
 	}
 	lambda[i] = computeLambdaTopEnd(i, M, lambda);
 	lambda[i] = std::clamp(lambda[i], min, max);
-	// Also solve the system from bottom to top, to help spread the updates
-	// better.
+	/*
+	 * Also solve the system from bottom to top, to help spread the updates
+	 * better.
+	 */
 	lambda[i] = computeLambdaTopEnd(i, M, lambda);
 	lambda[i] = std::clamp(lambda[i], min, max);
 	for (i = XY - 2; i >= XY - X; i--) {
@@ -637,7 +665,7 @@ static double gaussSeidel2Sor(double const M[XY][4], double omega,
 	return maxDiff;
 }
 
-// Normalise the values so that the smallest value is 1.
+/* Normalise the values so that the smallest value is 1. */
 static void normalise(double *ptr, size_t n)
 {
 	double minval = ptr[0];
@@ -647,7 +675,7 @@ static void normalise(double *ptr, size_t n)
 		ptr[i] /= minval;
 }
 
-// Rescale the values so that the average value is 1.
+/* Rescale the values so that the average value is 1. */
 static void reaverage(Span<double> data)
 {
 	double sum = std::accumulate(data.begin(), data.end(), 0.0);
@@ -670,15 +698,17 @@ static void runMatrixIterations(double const C[XY], double lambda[XY],
 				<< "Stop after " << i + 1 << " iterations";
 			break;
 		}
-		// this happens very occasionally (so make a note), though
-		// doesn't seem to matter
+		/*
+		 * this happens very occasionally (so make a note), though
+		 * doesn't seem to matter
+		 */
 		if (maxDiff > lastMaxDiff)
 			LOG(RPiAlsc, Debug)
 				<< "Iteration " << i << ": maxDiff gone up "
 				<< lastMaxDiff << " to " << maxDiff;
 		lastMaxDiff = maxDiff;
 	}
-	// We're going to normalise the lambdas so the total average is 1.
+	/* We're going to normalise the lambdas so the total average is 1. */
 	reaverage({ lambda, XY });
 }
 
@@ -712,41 +742,49 @@ void addLuminanceToTables(double results[3][Y][X], double const lambdaR[XY],
 void Alsc::doAlsc()
 {
 	double cr[XY], cb[XY], wr[XY][4], wb[XY][4], calTableR[XY], calTableB[XY], calTableTmp[XY];
-	// Calculate our R/B ("Cr"/"Cb") colour statistics, and assess which are
-	// usable.
+	/*
+	 * Calculate our R/B ("Cr"/"Cb") colour statistics, and assess which are
+	 * usable.
+	 */
 	calculateCrCb(statistics_, cr, cb, config_.minCount, config_.minG);
-	// Fetch the new calibrations (if any) for this CT. Resample them in
-	// case the camera mode is not full-frame.
+	/*
+	 * Fetch the new calibrations (if any) for this CT. Resample them in
+	 * case the camera mode is not full-frame.
+	 */
 	getCalTable(ct_, config_.calibrationsCr, calTableTmp);
 	resampleCalTable(calTableTmp, cameraMode_, calTableR);
 	getCalTable(ct_, config_.calibrationsCb, calTableTmp);
 	resampleCalTable(calTableTmp, cameraMode_, calTableB);
-	// You could print out the cal tables for this image here, if you're
-	// tuning the algorithm...
-	// Apply any calibration to the statistics, so the adaptive algorithm
-	// makes only the extra adjustments.
+	/*
+	 * You could print out the cal tables for this image here, if you're
+	 * tuning the algorithm...
+	 * Apply any calibration to the statistics, so the adaptive algorithm
+	 * makes only the extra adjustments.
+	 */
 	applyCalTable(calTableR, cr);
 	applyCalTable(calTableB, cb);
-	// Compute weights between zones.
+	/* Compute weights between zones. */
 	computeW(cr, config_.sigmaCr, wr);
 	computeW(cb, config_.sigmaCb, wb);
-	// Run Gauss-Seidel iterations over the resulting matrix, for R and B.
+	/* Run Gauss-Seidel iterations over the resulting matrix, for R and B. */
 	runMatrixIterations(cr, lambdaR_, wr, config_.omega, config_.nIter,
 			    config_.threshold, config_.lambdaBound);
 	runMatrixIterations(cb, lambdaB_, wb, config_.omega, config_.nIter,
 			    config_.threshold, config_.lambdaBound);
-	// Fold the calibrated gains into our final lambda values. (Note that on
-	// the next run, we re-start with the lambda values that don't have the
-	// calibration gains included.)
+	/*
+	 * Fold the calibrated gains into our final lambda values. (Note that on
+	 * the next run, we re-start with the lambda values that don't have the
+	 * calibration gains included.)
+	 */
 	compensateLambdasForCal(calTableR, lambdaR_, asyncLambdaR_);
 	compensateLambdasForCal(calTableB, lambdaB_, asyncLambdaB_);
-	// Fold in the luminance table at the appropriate strength.
+	/* Fold in the luminance table at the appropriate strength. */
 	addLuminanceToTables(asyncResults_, asyncLambdaR_, 1.0,
 			     asyncLambdaB_, luminanceTable_,
 			     config_.luminanceStrength);
 }
 
-// Register algorithm with the system.
+/* Register algorithm with the system. */
 static Algorithm *create(Controller *controller)
 {
 	return (Algorithm *)new Alsc(controller);
diff --git a/src/ipa/raspberrypi/controller/rpi/alsc.hpp b/src/ipa/raspberrypi/controller/rpi/alsc.hpp
index 7a0949d1..3ffc175d 100644
--- a/src/ipa/raspberrypi/controller/rpi/alsc.hpp
+++ b/src/ipa/raspberrypi/controller/rpi/alsc.hpp
@@ -15,7 +15,7 @@
 
 namespace RPiController {
 
-// Algorithm to generate automagic LSC (Lens Shading Correction) tables.
+/* Algorithm to generate automagic LSC (Lens Shading Correction) tables. */
 
 struct AlscCalibration {
 	double ct;
@@ -23,11 +23,11 @@ struct AlscCalibration {
 };
 
 struct AlscConfig {
-	// Only repeat the ALSC calculation every "this many" frames
+	/* Only repeat the ALSC calculation every "this many" frames */
 	uint16_t framePeriod;
-	// number of initial frames for which speed taken as 1.0 (maximum)
+	/* number of initial frames for which speed taken as 1.0 (maximum) */
 	uint16_t startupFrames;
-	// IIR filter speed applied to algorithm results
+	/* IIR filter speed applied to algorithm results */
 	double speed;
 	double sigmaCr;
 	double sigmaCb;
@@ -39,9 +39,9 @@ struct AlscConfig {
 	double luminanceStrength;
 	std::vector<AlscCalibration> calibrationsCr;
 	std::vector<AlscCalibration> calibrationsCb;
-	double defaultCt; // colour temperature if no metadata found
-	double threshold; // iteration termination threshold
-	double lambdaBound; // upper/lower bound for lambda from a value of 1
+	double defaultCt; /* colour temperature if no metadata found */
+	double threshold; /* iteration termination threshold */
+	double lambdaBound; /* upper/lower bound for lambda from a value of 1 */
 };
 
 class Alsc : public Algorithm
@@ -57,41 +57,45 @@ public:
 	void process(StatisticsPtr &stats, Metadata *imageMetadata) override;
 
 private:
-	// configuration is read-only, and available to both threads
+	/* configuration is read-only, and available to both threads */
 	AlscConfig config_;
 	bool firstTime_;
 	CameraMode cameraMode_;
 	double luminanceTable_[ALSC_CELLS_X * ALSC_CELLS_Y];
 	std::thread asyncThread_;
-	void asyncFunc(); // asynchronous thread function
+	void asyncFunc(); /* asynchronous thread function */
 	std::mutex mutex_;
-	// condvar for async thread to wait on
+	/* condvar for async thread to wait on */
 	std::condition_variable asyncSignal_;
-	// condvar for synchronous thread to wait on
+	/* condvar for synchronous thread to wait on */
 	std::condition_variable syncSignal_;
-	// for sync thread to check  if async thread finished (requires mutex)
+	/* for sync thread to check  if async thread finished (requires mutex) */
 	bool asyncFinished_;
-	// for async thread to check if it's been told to run (requires mutex)
+	/* for async thread to check if it's been told to run (requires mutex) */
 	bool asyncStart_;
-	// for async thread to check if it's been told to quit (requires mutex)
+	/* for async thread to check if it's been told to quit (requires mutex) */
 	bool asyncAbort_;
 
-	// The following are only for the synchronous thread to use:
-	// for sync thread to note its has asked async thread to run
+	/*
+	 * The following are only for the synchronous thread to use:
+	 * for sync thread to note its has asked async thread to run
+	 */
 	bool asyncStarted_;
-	// counts up to framePeriod before restarting the async thread
+	/* counts up to framePeriod before restarting the async thread */
 	int framePhase_;
-	// counts up to startupFrames
+	/* counts up to startupFrames */
 	int frameCount_;
-	// counts up to startupFrames for Process function
+	/* counts up to startupFrames for Process function */
 	int frameCount2_;
 	double syncResults_[3][ALSC_CELLS_Y][ALSC_CELLS_X];
 	double prevSyncResults_[3][ALSC_CELLS_Y][ALSC_CELLS_X];
 	void waitForAysncThread();
-	// The following are for the asynchronous thread to use, though the main
-	// thread can set/reset them if the async thread is known to be idle:
+	/*
+	 * The following are for the asynchronous thread to use, though the main
+	 * thread can set/reset them if the async thread is known to be idle:
+	 */
 	void restartAsync(StatisticsPtr &stats, Metadata *imageMetadata);
-	// copy out the results from the async thread so that it can be restarted
+	/* copy out the results from the async thread so that it can be restarted */
 	void fetchAsyncResults();
 	double ct_;
 	bcm2835_isp_stats_region statistics_[ALSC_CELLS_Y * ALSC_CELLS_X];
@@ -103,4 +107,4 @@ private:
 	double lambdaB_[ALSC_CELLS_X * ALSC_CELLS_Y];
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/rpi/awb.cpp b/src/ipa/raspberrypi/controller/rpi/awb.cpp
index 07791e8b..e4ed114d 100644
--- a/src/ipa/raspberrypi/controller/rpi/awb.cpp
+++ b/src/ipa/raspberrypi/controller/rpi/awb.cpp
@@ -21,8 +21,10 @@ LOG_DEFINE_CATEGORY(RPiAwb)
 #define AWB_STATS_SIZE_X DEFAULT_AWB_REGIONS_X
 #define AWB_STATS_SIZE_Y DEFAULT_AWB_REGIONS_Y
 
-// todo - the locking in this algorithm needs some tidying up as has been done
-// elsewhere (ALSC and AGC).
+/*
+ * todo - the locking in this algorithm needs some tidying up as has been done
+ * elsewhere (ALSC and AGC).
+ */
 
 void AwbMode::read(boost::property_tree::ptree const &params)
 {
@@ -107,11 +109,11 @@ void AwbConfig::read(boost::property_tree::ptree const &params)
 			bayes = false;
 		}
 	}
-	fast = params.get<int>("fast", bayes); // default to fast for Bayesian, otherwise slow
+	fast = params.get<int>("fast", bayes); /* default to fast for Bayesian, otherwise slow */
 	whitepointR = params.get<double>("whitepoint_r", 0.0);
 	whitepointB = params.get<double>("whitepoint_b", 0.0);
 	if (bayes == false)
-		sensitivityR = sensitivityB = 1.0; // nor do sensitivities make any sense
+		sensitivityR = sensitivityB = 1.0; /* nor do sensitivities make any sense */
 }
 
 Awb::Awb(Controller *controller)
@@ -147,16 +149,18 @@ void Awb::read(boost::property_tree::ptree const &params)
 void Awb::initialise()
 {
 	frameCount_ = framePhase_ = 0;
-	// Put something sane into the status that we are filtering towards,
-	// just in case the first few frames don't have anything meaningful in
-	// them.
+	/*
+	 * Put something sane into the status that we are filtering towards,
+	 * just in case the first few frames don't have anything meaningful in
+	 * them.
+	 */
 	if (!config_.ctR.empty() && !config_.ctB.empty()) {
 		syncResults_.temperatureK = config_.ctR.domain().clip(4000);
 		syncResults_.gainR = 1.0 / config_.ctR.eval(syncResults_.temperatureK);
 		syncResults_.gainG = 1.0;
 		syncResults_.gainB = 1.0 / config_.ctB.eval(syncResults_.temperatureK);
 	} else {
-		// random values just to stop the world blowing up
+		/* random values just to stop the world blowing up */
 		syncResults_.temperatureK = 4500;
 		syncResults_.gainR = syncResults_.gainG = syncResults_.gainB = 1.0;
 	}
@@ -171,7 +175,7 @@ bool Awb::isPaused() const
 
 void Awb::pause()
 {
-	// "Pause" by fixing everything to the most recent values.
+	/* "Pause" by fixing everything to the most recent values. */
 	manualR_ = syncResults_.gainR = prevSyncResults_.gainR;
 	manualB_ = syncResults_.gainB = prevSyncResults_.gainB;
 	syncResults_.gainG = prevSyncResults_.gainG;
@@ -186,8 +190,10 @@ void Awb::resume()
 
 unsigned int Awb::getConvergenceFrames() const
 {
-	// If not in auto mode, there is no convergence
-	// to happen, so no need to drop any frames - return zero.
+	/*
+	 * If not in auto mode, there is no convergence
+	 * to happen, so no need to drop any frames - return zero.
+	 */
 	if (!isAutoEnabled())
 		return 0;
 	else
@@ -201,11 +207,13 @@ void Awb::setMode(std::string const &modeName)
 
 void Awb::setManualGains(double manualR, double manualB)
 {
-	// If any of these are 0.0, we swich back to auto.
+	/* If any of these are 0.0, we swich back to auto. */
 	manualR_ = manualR;
 	manualB_ = manualB;
-	// If not in auto mode, set these values into the syncResults which
-	// means that Prepare() will adopt them immediately.
+	/*
+	 * If not in auto mode, set these values into the syncResults which
+	 * means that Prepare() will adopt them immediately.
+	 */
 	if (!isAutoEnabled()) {
 		syncResults_.gainR = prevSyncResults_.gainR = manualR_;
 		syncResults_.gainG = prevSyncResults_.gainG = 1.0;
@@ -216,8 +224,10 @@ void Awb::setManualGains(double manualR, double manualB)
 void Awb::switchMode([[maybe_unused]] CameraMode const &cameraMode,
 		     Metadata *metadata)
 {
-	// On the first mode switch we'll have no meaningful colour
-	// temperature, so try to dead reckon one if in manual mode.
+	/*
+	 * On the first mode switch we'll have no meaningful colour
+	 * temperature, so try to dead reckon one if in manual mode.
+	 */
 	if (!isAutoEnabled() && firstSwitchMode_ && config_.bayes) {
 		Pwl ctRInverse = config_.ctR.inverse();
 		Pwl ctBInverse = config_.ctB.inverse();
@@ -226,7 +236,7 @@ void Awb::switchMode([[maybe_unused]] CameraMode const &cameraMode,
 		prevSyncResults_.temperatureK = (ctR + ctB) / 2;
 		syncResults_.temperatureK = prevSyncResults_.temperatureK;
 	}
-	// Let other algorithms know the current white balance values.
+	/* Let other algorithms know the current white balance values. */
 	metadata->set("awb.status", prevSyncResults_);
 	firstSwitchMode_ = false;
 }
@@ -241,8 +251,10 @@ void Awb::fetchAsyncResults()
 	LOG(RPiAwb, Debug) << "Fetch AWB results";
 	asyncFinished_ = false;
 	asyncStarted_ = false;
-	// It's possible manual gains could be set even while the async
-	// thread was running, so only copy the results if still in auto mode.
+	/*
+	 * It's possible manual gains could be set even while the async
+	 * thread was running, so only copy the results if still in auto mode.
+	 */
 	if (isAutoEnabled())
 		syncResults_ = asyncResults_;
 }
@@ -250,9 +262,9 @@ void Awb::fetchAsyncResults()
 void Awb::restartAsync(StatisticsPtr &stats, double lux)
 {
 	LOG(RPiAwb, Debug) << "Starting AWB calculation";
-	// this makes a new reference which belongs to the asynchronous thread
+	/* this makes a new reference which belongs to the asynchronous thread */
 	statistics_ = stats;
-	// store the mode as it could technically change
+	/* store the mode as it could technically change */
 	auto m = config_.modes.find(modeName_);
 	mode_ = m != config_.modes.end()
 			? &m->second
@@ -284,7 +296,7 @@ void Awb::prepare(Metadata *imageMetadata)
 		if (asyncStarted_ && asyncFinished_)
 			fetchAsyncResults();
 	}
-	// Finally apply IIR filter to results and put into metadata.
+	/* Finally apply IIR filter to results and put into metadata. */
 	memcpy(prevSyncResults_.mode, syncResults_.mode,
 	       sizeof(prevSyncResults_.mode));
 	prevSyncResults_.temperatureK = speed * syncResults_.temperatureK +
@@ -304,17 +316,17 @@ void Awb::prepare(Metadata *imageMetadata)
 
 void Awb::process(StatisticsPtr &stats, Metadata *imageMetadata)
 {
-	// Count frames since we last poked the async thread.
+	/* Count frames since we last poked the async thread. */
 	if (framePhase_ < (int)config_.framePeriod)
 		framePhase_++;
 	LOG(RPiAwb, Debug) << "frame_phase " << framePhase_;
-	// We do not restart the async thread if we're not in auto mode.
+	/* We do not restart the async thread if we're not in auto mode. */
 	if (isAutoEnabled() &&
 	    (framePhase_ >= (int)config_.framePeriod ||
 	     frameCount_ < (int)config_.startupFrames)) {
-		// Update any settings and any image metadata that we need.
+		/* Update any settings and any image metadata that we need. */
 		struct LuxStatus luxStatus = {};
-		luxStatus.lux = 400; // in case no metadata
+		luxStatus.lux = 400; /* in case no metadata */
 		if (imageMetadata->get("lux.status", luxStatus) != 0)
 			LOG(RPiAwb, Debug) << "No lux metadata found";
 		LOG(RPiAwb, Debug) << "Awb lux value is " << luxStatus.lux;
@@ -366,15 +378,21 @@ static void generateStats(std::vector<Awb::RGB> &zones,
 void Awb::prepareStats()
 {
 	zones_.clear();
-	// LSC has already been applied to the stats in this pipeline, so stop
-	// any LSC compensation.  We also ignore config_.fast in this version.
+	/*
+	 * LSC has already been applied to the stats in this pipeline, so stop
+	 * any LSC compensation.  We also ignore config_.fast in this version.
+	 */
 	generateStats(zones_, statistics_->awb_stats, config_.minPixels,
 		      config_.minG);
-	// we're done with these; we may as well relinquish our hold on the
-	// pointer.
+	/*
+	 * we're done with these; we may as well relinquish our hold on the
+	 * pointer.
+	 */
 	statistics_.reset();
-	// apply sensitivities, so values appear to come from our "canonical"
-	// sensor.
+	/*
+	 * apply sensitivities, so values appear to come from our "canonical"
+	 * sensor.
+	 */
 	for (auto &zone : zones_) {
 		zone.R *= config_.sensitivityR;
 		zone.B *= config_.sensitivityB;
@@ -383,14 +401,16 @@ void Awb::prepareStats()
 
 double Awb::computeDelta2Sum(double gainR, double gainB)
 {
-	// Compute the sum of the squared colour error (non-greyness) as it
-	// appears in the log likelihood equation.
+	/*
+	 * Compute the sum of the squared colour error (non-greyness) as it
+	 * appears in the log likelihood equation.
+	 */
 	double delta2Sum = 0;
 	for (auto &z : zones_) {
 		double deltaR = gainR * z.R - 1 - config_.whitepointR;
 		double deltaB = gainB * z.B - 1 - config_.whitepointB;
 		double delta2 = deltaR * deltaR + deltaB * deltaB;
-		//LOG(RPiAwb, Debug) << "deltaR " << deltaR << " deltaB " << deltaB << " delta2 " << delta2;
+		/* LOG(RPiAwb, Debug) << "deltaR " << deltaR << " deltaB " << deltaB << " delta2 " << delta2; */
 		delta2 = std::min(delta2, config_.deltaLimit);
 		delta2Sum += delta2;
 	}
@@ -399,15 +419,17 @@ double Awb::computeDelta2Sum(double gainR, double gainB)
 
 Pwl Awb::interpolatePrior()
 {
-	// Interpolate the prior log likelihood function for our current lux
-	// value.
+	/*
+	 * Interpolate the prior log likelihood function for our current lux
+	 * value.
+	 */
 	if (lux_ <= config_.priors.front().lux)
 		return config_.priors.front().prior;
 	else if (lux_ >= config_.priors.back().lux)
 		return config_.priors.back().prior;
 	else {
 		int idx = 0;
-		// find which two we lie between
+		/* find which two we lie between */
 		while (config_.priors[idx + 1].lux < lux_)
 			idx++;
 		double lux0 = config_.priors[idx].lux,
@@ -424,8 +446,10 @@ Pwl Awb::interpolatePrior()
 static double interpolateQuadatric(Pwl::Point const &a, Pwl::Point const &b,
 				   Pwl::Point const &c)
 {
-	// Given 3 points on a curve, find the extremum of the function in that
-	// interval by fitting a quadratic.
+	/*
+	 * Given 3 points on a curve, find the extremum of the function in that
+	 * interval by fitting a quadratic.
+	 */
 	const double eps = 1e-3;
 	Pwl::Point ca = c - a, ba = b - a;
 	double denominator = 2 * (ba.y * ca.x - ca.y * ba.x);
@@ -434,17 +458,17 @@ static double interpolateQuadatric(Pwl::Point const &a, Pwl::Point const &b,
 		double result = numerator / denominator + a.x;
 		return std::max(a.x, std::min(c.x, result));
 	}
-	// has degenerated to straight line segment
+	/* has degenerated to straight line segment */
 	return a.y < c.y - eps ? a.x : (c.y < a.y - eps ? c.x : b.x);
 }
 
 double Awb::coarseSearch(Pwl const &prior)
 {
-	points_.clear(); // assume doesn't deallocate memory
+	points_.clear(); /* assume doesn't deallocate memory */
 	size_t bestPoint = 0;
 	double t = mode_->ctLo;
 	int spanR = 0, spanB = 0;
-	// Step down the CT curve evaluating log likelihood.
+	/* Step down the CT curve evaluating log likelihood. */
 	while (true) {
 		double r = config_.ctR.eval(t, &spanR);
 		double b = config_.ctB.eval(t, &spanB);
@@ -462,13 +486,15 @@ double Awb::coarseSearch(Pwl const &prior)
 			bestPoint = points_.size() - 1;
 		if (t == mode_->ctHi)
 			break;
-		// for even steps along the r/b curve scale them by the current t
+		/* for even steps along the r/b curve scale them by the current t */
 		t = std::min(t + t / 10 * config_.coarseStep, mode_->ctHi);
 	}
 	t = points_[bestPoint].x;
 	LOG(RPiAwb, Debug) << "Coarse search found CT " << t;
-	// We have the best point of the search, but refine it with a quadratic
-	// interpolation around its neighbours.
+	/*
+	 * We have the best point of the search, but refine it with a quadratic
+	 * interpolation around its neighbours.
+	 */
 	if (points_.size() > 2) {
 		unsigned long bp = std::min(bestPoint, points_.size() - 2);
 		bestPoint = std::max(1UL, bp);
@@ -496,17 +522,21 @@ void Awb::fineSearch(double &t, double &r, double &b, Pwl const &prior)
 	Pwl::Point transverse(bDiff, -rDiff);
 	if (transverse.len2() < 1e-6)
 		return;
-	// unit vector orthogonal to the b vs. r function (pointing outwards
-	// with r and b increasing)
+	/*
+	 * unit vector orthogonal to the b vs. r function (pointing outwards
+	 * with r and b increasing)
+	 */
 	transverse = transverse / transverse.len();
 	double bestLogLikelihood = 0, bestT = 0, bestR = 0, bestB = 0;
 	double transverseRange = config_.transverseNeg + config_.transversePos;
 	const int maxNumDeltas = 12;
-	// a transverse step approximately every 0.01 r/b units
+	/* a transverse step approximately every 0.01 r/b units */
 	int numDeltas = floor(transverseRange * 100 + 0.5) + 1;
 	numDeltas = numDeltas < 3 ? 3 : (numDeltas > maxNumDeltas ? maxNumDeltas : numDeltas);
-	// Step down CT curve. March a bit further if the transverse range is
-	// large.
+	/*
+	 * Step down CT curve. March a bit further if the transverse range is
+	 * large.
+	 */
 	nsteps += numDeltas;
 	for (int i = -nsteps; i <= nsteps; i++) {
 		double tTest = t + i * step;
@@ -514,10 +544,10 @@ void Awb::fineSearch(double &t, double &r, double &b, Pwl const &prior)
 			prior.eval(prior.domain().clip(tTest));
 		double rCurve = config_.ctR.eval(tTest, &spanR);
 		double bCurve = config_.ctB.eval(tTest, &spanB);
-		// x will be distance off the curve, y the log likelihood there
+		/* x will be distance off the curve, y the log likelihood there */
 		Pwl::Point points[maxNumDeltas];
 		int bestPoint = 0;
-		// Take some measurements transversely *off* the CT curve.
+		/* Take some measurements transversely *off* the CT curve. */
 		for (int j = 0; j < numDeltas; j++) {
 			points[j].x = -config_.transverseNeg +
 				      (transverseRange * j) / (numDeltas - 1);
@@ -533,8 +563,10 @@ void Awb::fineSearch(double &t, double &r, double &b, Pwl const &prior)
 			if (points[j].y < points[bestPoint].y)
 				bestPoint = j;
 		}
-		// We have NUM_DELTAS points transversely across the CT curve,
-		// now let's do a quadratic interpolation for the best result.
+		/*
+		 * We have NUM_DELTAS points transversely across the CT curve,
+		 * now let's do a quadratic interpolation for the best result.
+		 */
 		bestPoint = std::max(1, std::min(bestPoint, numDeltas - 2));
 		Pwl::Point rbTest = Pwl::Point(rCurve, bCurve) +
 					transverse * interpolateQuadatric(points[bestPoint - 1],
@@ -560,12 +592,16 @@ void Awb::fineSearch(double &t, double &r, double &b, Pwl const &prior)
 
 void Awb::awbBayes()
 {
-	// May as well divide out G to save computeDelta2Sum from doing it over
-	// and over.
+	/*
+	 * May as well divide out G to save computeDelta2Sum from doing it over
+	 * and over.
+	 */
 	for (auto &z : zones_)
 		z.R = z.R / (z.G + 1), z.B = z.B / (z.G + 1);
-	// Get the current prior, and scale according to how many zones are
-	// valid... not entirely sure about this.
+	/*
+	 * Get the current prior, and scale according to how many zones are
+	 * valid... not entirely sure about this.
+	 */
 	Pwl prior = interpolatePrior();
 	prior *= zones_.size() / (double)(AWB_STATS_SIZE_X * AWB_STATS_SIZE_Y);
 	prior.map([](double x, double y) {
@@ -577,19 +613,23 @@ void Awb::awbBayes()
 	LOG(RPiAwb, Debug)
 		<< "After coarse search: r " << r << " b " << b << " (gains r "
 		<< 1 / r << " b " << 1 / b << ")";
-	// Not entirely sure how to handle the fine search yet. Mostly the
-	// estimated CT is already good enough, but the fine search allows us to
-	// wander transverely off the CT curve. Under some illuminants, where
-	// there may be more or less green light, this may prove beneficial,
-	// though I probably need more real datasets before deciding exactly how
-	// this should be controlled and tuned.
+	/*
+	 * Not entirely sure how to handle the fine search yet. Mostly the
+	 * estimated CT is already good enough, but the fine search allows us to
+	 * wander transverely off the CT curve. Under some illuminants, where
+	 * there may be more or less green light, this may prove beneficial,
+	 * though I probably need more real datasets before deciding exactly how
+	 * this should be controlled and tuned.
+	 */
 	fineSearch(t, r, b, prior);
 	LOG(RPiAwb, Debug)
 		<< "After fine search: r " << r << " b " << b << " (gains r "
 		<< 1 / r << " b " << 1 / b << ")";
-	// Write results out for the main thread to pick up. Remember to adjust
-	// the gains from the ones that the "canonical sensor" would require to
-	// the ones needed by *this* sensor.
+	/*
+	 * Write results out for the main thread to pick up. Remember to adjust
+	 * the gains from the ones that the "canonical sensor" would require to
+	 * the ones needed by *this* sensor.
+	 */
 	asyncResults_.temperatureK = t;
 	asyncResults_.gainR = 1.0 / r * config_.sensitivityR;
 	asyncResults_.gainG = 1.0;
@@ -599,10 +639,12 @@ void Awb::awbBayes()
 void Awb::awbGrey()
 {
 	LOG(RPiAwb, Debug) << "Grey world AWB";
-	// Make a separate list of the derivatives for each of red and blue, so
-	// that we can sort them to exclude the extreme gains.  We could
-	// consider some variations, such as normalising all the zones first, or
-	// doing an L2 average etc.
+	/*
+	 * Make a separate list of the derivatives for each of red and blue, so
+	 * that we can sort them to exclude the extreme gains.  We could
+	 * consider some variations, such as normalising all the zones first, or
+	 * doing an L2 average etc.
+	 */
 	std::vector<RGB> &derivsR(zones_);
 	std::vector<RGB> derivsB(derivsR);
 	std::sort(derivsR.begin(), derivsR.end(),
@@ -613,7 +655,7 @@ void Awb::awbGrey()
 		  [](RGB const &a, RGB const &b) {
 			  return a.G * b.B < b.G * a.B;
 		  });
-	// Average the middle half of the values.
+	/* Average the middle half of the values. */
 	int discard = derivsR.size() / 4;
 	RGB sumR(0, 0, 0), sumB(0, 0, 0);
 	for (auto ri = derivsR.begin() + discard,
@@ -622,7 +664,7 @@ void Awb::awbGrey()
 		sumR += *ri, sumB += *bi;
 	double gainR = sumR.G / (sumR.R + 1),
 	       gainB = sumB.G / (sumB.B + 1);
-	asyncResults_.temperatureK = 4500; // don't know what it is
+	asyncResults_.temperatureK = 4500; /* don't know what it is */
 	asyncResults_.gainR = gainR;
 	asyncResults_.gainG = 1.0;
 	asyncResults_.gainB = gainB;
@@ -645,7 +687,7 @@ void Awb::doAwb()
 	}
 }
 
-// Register algorithm with the system.
+/* Register algorithm with the system. */
 static Algorithm *create(Controller *controller)
 {
 	return (Algorithm *)new Awb(controller);
diff --git a/src/ipa/raspberrypi/controller/rpi/awb.hpp b/src/ipa/raspberrypi/controller/rpi/awb.hpp
index 021aafa9..91854853 100644
--- a/src/ipa/raspberrypi/controller/rpi/awb.hpp
+++ b/src/ipa/raspberrypi/controller/rpi/awb.hpp
@@ -16,63 +16,71 @@
 
 namespace RPiController {
 
-// Control algorithm to perform AWB calculations.
+/* Control algorithm to perform AWB calculations. */
 
 struct AwbMode {
 	void read(boost::property_tree::ptree const &params);
-	double ctLo; // low CT value for search
-	double ctHi; // high CT value for search
+	double ctLo; /* low CT value for search */
+	double ctHi; /* high CT value for search */
 };
 
 struct AwbPrior {
 	void read(boost::property_tree::ptree const &params);
-	double lux; // lux level
-	Pwl prior; // maps CT to prior log likelihood for this lux level
+	double lux; /* lux level */
+	Pwl prior; /* maps CT to prior log likelihood for this lux level */
 };
 
 struct AwbConfig {
 	AwbConfig() : defaultMode(nullptr) {}
 	void read(boost::property_tree::ptree const &params);
-	// Only repeat the AWB calculation every "this many" frames
+	/* Only repeat the AWB calculation every "this many" frames */
 	uint16_t framePeriod;
-	// number of initial frames for which speed taken as 1.0 (maximum)
+	/* number of initial frames for which speed taken as 1.0 (maximum) */
 	uint16_t startupFrames;
-	unsigned int convergenceFrames; // approx number of frames to converge
-	double speed; // IIR filter speed applied to algorithm results
-	bool fast; // "fast" mode uses a 16x16 rather than 32x32 grid
-	Pwl ctR; // function maps CT to r (= R/G)
-	Pwl ctB; // function maps CT to b (= B/G)
-	// table of illuminant priors at different lux levels
+	unsigned int convergenceFrames; /* approx number of frames to converge */
+	double speed; /* IIR filter speed applied to algorithm results */
+	bool fast; /* "fast" mode uses a 16x16 rather than 32x32 grid */
+	Pwl ctR; /* function maps CT to r (= R/G) */
+	Pwl ctB; /* function maps CT to b (= B/G) */
+	/* table of illuminant priors at different lux levels */
 	std::vector<AwbPrior> priors;
-	// AWB "modes" (determines the search range)
+	/* AWB "modes" (determines the search range) */
 	std::map<std::string, AwbMode> modes;
-	AwbMode *defaultMode; // mode used if no mode selected
-	// minimum proportion of pixels counted within AWB region for it to be
-	// "useful"
+	AwbMode *defaultMode; /* mode used if no mode selected */
+	/*
+	 * minimum proportion of pixels counted within AWB region for it to be
+	 * "useful"
+	 */
 	double minPixels;
-	// minimum G value of those pixels, to be regarded a "useful"
+	/* minimum G value of those pixels, to be regarded a "useful" */
 	uint16_t minG;
-	// number of AWB regions that must be "useful" in order to do the AWB
-	// calculation
+	/*
+	 * number of AWB regions that must be "useful" in order to do the AWB
+	 * calculation
+	 */
 	uint32_t minRegions;
-	// clamp on colour error term (so as not to penalise non-grey excessively)
+	/* clamp on colour error term (so as not to penalise non-grey excessively) */
 	double deltaLimit;
-	// step size control in coarse search
+	/* step size control in coarse search */
 	double coarseStep;
-	// how far to wander off CT curve towards "more purple"
+	/* how far to wander off CT curve towards "more purple" */
 	double transversePos;
-	// how far to wander off CT curve towards "more green"
+	/* how far to wander off CT curve towards "more green" */
 	double transverseNeg;
-	// red sensitivity ratio (set to canonical sensor's R/G divided by this
-	// sensor's R/G)
+	/*
+	 * red sensitivity ratio (set to canonical sensor's R/G divided by this
+	 * sensor's R/G)
+	 */
 	double sensitivityR;
-	// blue sensitivity ratio (set to canonical sensor's B/G divided by this
-	// sensor's B/G)
+	/*
+	 * blue sensitivity ratio (set to canonical sensor's B/G divided by this
+	 * sensor's B/G)
+	 */
 	double sensitivityB;
-	// The whitepoint (which we normally "aim" for) can be moved.
+	/* The whitepoint (which we normally "aim" for) can be moved. */
 	double whitepointR;
 	double whitepointB;
-	bool bayes; // use Bayesian algorithm
+	bool bayes; /* use Bayesian algorithm */
 };
 
 class Awb : public AwbAlgorithm
@@ -83,7 +91,7 @@ public:
 	char const *name() const override;
 	void initialise() override;
 	void read(boost::property_tree::ptree const &params) override;
-	// AWB handles "pausing" for itself.
+	/* AWB handles "pausing" for itself. */
 	bool isPaused() const override;
 	void pause() override;
 	void resume() override;
@@ -108,35 +116,39 @@ public:
 
 private:
 	bool isAutoEnabled() const;
-	// configuration is read-only, and available to both threads
+	/* configuration is read-only, and available to both threads */
 	AwbConfig config_;
 	std::thread asyncThread_;
-	void asyncFunc(); // asynchronous thread function
+	void asyncFunc(); /* asynchronous thread function */
 	std::mutex mutex_;
-	// condvar for async thread to wait on
+	/* condvar for async thread to wait on */
 	std::condition_variable asyncSignal_;
-	// condvar for synchronous thread to wait on
+	/* condvar for synchronous thread to wait on */
 	std::condition_variable syncSignal_;
-	// for sync thread to check  if async thread finished (requires mutex)
+	/* for sync thread to check  if async thread finished (requires mutex) */
 	bool asyncFinished_;
-	// for async thread to check if it's been told to run (requires mutex)
+	/* for async thread to check if it's been told to run (requires mutex) */
 	bool asyncStart_;
-	// for async thread to check if it's been told to quit (requires mutex)
+	/* for async thread to check if it's been told to quit (requires mutex) */
 	bool asyncAbort_;
 
-	// The following are only for the synchronous thread to use:
-	// for sync thread to note its has asked async thread to run
+	/*
+	 * The following are only for the synchronous thread to use:
+	 * for sync thread to note its has asked async thread to run
+	 */
 	bool asyncStarted_;
-	// counts up to framePeriod before restarting the async thread
+	/* counts up to framePeriod before restarting the async thread */
 	int framePhase_;
-	int frameCount_; // counts up to startup_frames
+	int frameCount_; /* counts up to startup_frames */
 	AwbStatus syncResults_;
 	AwbStatus prevSyncResults_;
 	std::string modeName_;
-	// The following are for the asynchronous thread to use, though the main
-	// thread can set/reset them if the async thread is known to be idle:
+	/*
+	 * The following are for the asynchronous thread to use, though the main
+	 * thread can set/reset them if the async thread is known to be idle:
+	 */
 	void restartAsync(StatisticsPtr &stats, double lux);
-	// copy out the results from the async thread so that it can be restarted
+	/* copy out the results from the async thread so that it can be restarted */
 	void fetchAsyncResults();
 	StatisticsPtr statistics_;
 	AwbMode *mode_;
@@ -152,11 +164,11 @@ private:
 	void fineSearch(double &t, double &r, double &b, Pwl const &prior);
 	std::vector<RGB> zones_;
 	std::vector<Pwl::Point> points_;
-	// manual r setting
+	/* manual r setting */
 	double manualR_;
-	// manual b setting
+	/* manual b setting */
 	double manualB_;
-	bool firstSwitchMode_; // is this the first call to SwitchMode?
+	bool firstSwitchMode_; /* is this the first call to SwitchMode? */
 };
 
 static inline Awb::RGB operator+(Awb::RGB const &a, Awb::RGB const &b)
@@ -176,4 +188,4 @@ static inline Awb::RGB operator*(Awb::RGB const &rgb, double d)
 	return d * rgb;
 }
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/rpi/black_level.cpp b/src/ipa/raspberrypi/controller/rpi/black_level.cpp
index 340da0f0..26cf073a 100644
--- a/src/ipa/raspberrypi/controller/rpi/black_level.cpp
+++ b/src/ipa/raspberrypi/controller/rpi/black_level.cpp
@@ -34,7 +34,7 @@ char const *BlackLevel::name() const
 void BlackLevel::read(boost::property_tree::ptree const &params)
 {
 	uint16_t blackLevel = params.get<uint16_t>(
-		"black_level", 4096); // 64 in 10 bits scaled to 16 bits
+		"black_level", 4096); /* 64 in 10 bits scaled to 16 bits */
 	blackLevelR_ = params.get<uint16_t>("black_level_r", blackLevel);
 	blackLevelG_ = params.get<uint16_t>("black_level_g", blackLevel);
 	blackLevelB_ = params.get<uint16_t>("black_level_b", blackLevel);
@@ -46,8 +46,10 @@ void BlackLevel::read(boost::property_tree::ptree const &params)
 
 void BlackLevel::prepare(Metadata *imageMetadata)
 {
-	// Possibly we should think about doing this in a switchMode or
-	// something?
+	/*
+	 * Possibly we should think about doing this in a switchMode or
+	 * something?
+	 */
 	struct BlackLevelStatus status;
 	status.blackLevelR = blackLevelR_;
 	status.blackLevelG = blackLevelG_;
@@ -55,7 +57,7 @@ void BlackLevel::prepare(Metadata *imageMetadata)
 	imageMetadata->set("black_level.status", status);
 }
 
-// Register algorithm with the system.
+/* Register algorithm with the system. */
 static Algorithm *create(Controller *controller)
 {
 	return new BlackLevel(controller);
diff --git a/src/ipa/raspberrypi/controller/rpi/black_level.hpp b/src/ipa/raspberrypi/controller/rpi/black_level.hpp
index 0d74f6a4..f01c5515 100644
--- a/src/ipa/raspberrypi/controller/rpi/black_level.hpp
+++ b/src/ipa/raspberrypi/controller/rpi/black_level.hpp
@@ -9,7 +9,7 @@
 #include "../algorithm.hpp"
 #include "../black_level_status.h"
 
-// This is our implementation of the "black level algorithm".
+/* This is our implementation of the "black level algorithm". */
 
 namespace RPiController {
 
@@ -27,4 +27,4 @@ private:
 	double blackLevelB_;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/rpi/ccm.cpp b/src/ipa/raspberrypi/controller/rpi/ccm.cpp
index 24d8e5bd..9ad63b6e 100644
--- a/src/ipa/raspberrypi/controller/rpi/ccm.cpp
+++ b/src/ipa/raspberrypi/controller/rpi/ccm.cpp
@@ -19,11 +19,13 @@ using namespace libcamera;
 
 LOG_DEFINE_CATEGORY(RPiCcm)
 
-// This algorithm selects a CCM (Colour Correction Matrix) according to the
-// colour temperature estimated by AWB (interpolating between known matricies as
-// necessary). Additionally the amount of colour saturation can be controlled
-// both according to the current estimated lux level and according to a
-// saturation setting that is exposed to applications.
+/*
+ * This algorithm selects a CCM (Colour Correction Matrix) according to the
+ * colour temperature estimated by AWB (interpolating between known matricies as
+ * necessary). Additionally the amount of colour saturation can be controlled
+ * both according to the current estimated lux level and according to a
+ * saturation setting that is exposed to applications.
+ */
 
 #define NAME "rpi.ccm"
 
@@ -125,11 +127,11 @@ void Ccm::prepare(Metadata *imageMetadata)
 {
 	bool awbOk = false, luxOk = false;
 	struct AwbStatus awb = {};
-	awb.temperatureK = 4000; // in case no metadata
+	awb.temperatureK = 4000; /* in case no metadata */
 	struct LuxStatus lux = {};
-	lux.lux = 400; // in case no metadata
+	lux.lux = 400; /* in case no metadata */
 	{
-		// grab mutex just once to get everything
+		/* grab mutex just once to get everything */
 		std::lock_guard<Metadata> lock(*imageMetadata);
 		awbOk = getLocked(imageMetadata, "awb.status", awb);
 		luxOk = getLocked(imageMetadata, "lux.status", lux);
@@ -162,7 +164,7 @@ void Ccm::prepare(Metadata *imageMetadata)
 	imageMetadata->set("ccm.status", ccmStatus);
 }
 
-// Register algorithm with the system.
+/* Register algorithm with the system. */
 static Algorithm *create(Controller *controller)
 {
 	return (Algorithm *)new Ccm(controller);
diff --git a/src/ipa/raspberrypi/controller/rpi/ccm.hpp b/src/ipa/raspberrypi/controller/rpi/ccm.hpp
index 4c4807b8..7622044c 100644
--- a/src/ipa/raspberrypi/controller/rpi/ccm.hpp
+++ b/src/ipa/raspberrypi/controller/rpi/ccm.hpp
@@ -13,7 +13,7 @@
 
 namespace RPiController {
 
-// Algorithm to calculate colour matrix. Should be placed after AWB.
+/* Algorithm to calculate colour matrix. Should be placed after AWB. */
 
 struct Matrix {
 	Matrix(double m0, double m1, double m2, double m3, double m4, double m5,
@@ -72,4 +72,4 @@ private:
 	double saturation_;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/rpi/contrast.cpp b/src/ipa/raspberrypi/controller/rpi/contrast.cpp
index 16983757..f11c834a 100644
--- a/src/ipa/raspberrypi/controller/rpi/contrast.cpp
+++ b/src/ipa/raspberrypi/controller/rpi/contrast.cpp
@@ -18,11 +18,13 @@ using namespace libcamera;
 
 LOG_DEFINE_CATEGORY(RPiContrast)
 
-// This is a very simple control algorithm which simply retrieves the results of
-// AGC and AWB via their "status" metadata, and applies digital gain to the
-// colour channels in accordance with those instructions. We take care never to
-// apply less than unity gains, as that would cause fully saturated pixels to go
-// off-white.
+/*
+ * This is a very simple control algorithm which simply retrieves the results of
+ * AGC and AWB via their "status" metadata, and applies digital gain to the
+ * colour channels in accordance with those instructions. We take care never to
+ * apply less than unity gains, as that would cause fully saturated pixels to go
+ * off-white.
+ */
 
 #define NAME "rpi.contrast"
 
@@ -38,15 +40,15 @@ char const *Contrast::name() const
 
 void Contrast::read(boost::property_tree::ptree const &params)
 {
-	// enable adaptive enhancement by default
+	/* enable adaptive enhancement by default */
 	config_.ceEnable = params.get<int>("ce_enable", 1);
-	// the point near the bottom of the histogram to move
+	/* the point near the bottom of the histogram to move */
 	config_.loHistogram = params.get<double>("lo_histogram", 0.01);
-	// where in the range to try and move it to
+	/* where in the range to try and move it to */
 	config_.loLevel = params.get<double>("lo_level", 0.015);
-	// but don't move by more than this
+	/* but don't move by more than this */
 	config_.loMax = params.get<double>("lo_max", 500);
-	// equivalent values for the top of the histogram...
+	/* equivalent values for the top of the histogram... */
 	config_.hiHistogram = params.get<double>("hi_histogram", 0.95);
 	config_.hiLevel = params.get<double>("hi_level", 0.95);
 	config_.hiMax = params.get<double>("hi_max", 2000);
@@ -81,8 +83,10 @@ static void fillInStatus(ContrastStatus &status, double brightness,
 
 void Contrast::initialise()
 {
-	// Fill in some default values as Prepare will run before Process gets
-	// called.
+	/*
+	 * Fill in some default values as Prepare will run before Process gets
+	 * called.
+	 */
 	fillInStatus(status_, brightness_, contrast_, config_.gammaCurve);
 }
 
@@ -97,8 +101,10 @@ Pwl computeStretchCurve(Histogram const &histogram,
 {
 	Pwl enhance;
 	enhance.append(0, 0);
-	// If the start of the histogram is rather empty, try to pull it down a
-	// bit.
+	/*
+	 * If the start of the histogram is rather empty, try to pull it down a
+	 * bit.
+	 */
 	double histLo = histogram.quantile(config.loHistogram) *
 			(65536 / NUM_HISTOGRAM_BINS);
 	double levelLo = config.loLevel * 65536;
@@ -109,13 +115,17 @@ Pwl computeStretchCurve(Histogram const &histogram,
 	LOG(RPiContrast, Debug)
 		<< "Final values " << histLo << " -> " << levelLo;
 	enhance.append(histLo, levelLo);
-	// Keep the mid-point (median) in the same place, though, to limit the
-	// apparent amount of global brightness shift.
+	/*
+	 * Keep the mid-point (median) in the same place, though, to limit the
+	 * apparent amount of global brightness shift.
+	 */
 	double mid = histogram.quantile(0.5) * (65536 / NUM_HISTOGRAM_BINS);
 	enhance.append(mid, mid);
 
-	// If the top to the histogram is empty, try to pull the pixel values
-	// there up.
+	/*
+	 * If the top to the histogram is empty, try to pull the pixel values
+	 * there up.
+	 */
 	double histHi = histogram.quantile(config.hiHistogram) *
 			(65536 / NUM_HISTOGRAM_BINS);
 	double levelHi = config.hiLevel * 65536;
@@ -149,22 +159,30 @@ void Contrast::process(StatisticsPtr &stats,
 		       [[maybe_unused]] Metadata *imageMetadata)
 {
 	Histogram histogram(stats->hist[0].g_hist, NUM_HISTOGRAM_BINS);
-	// We look at the histogram and adjust the gamma curve in the following
-	// ways: 1. Adjust the gamma curve so as to pull the start of the
-	// histogram down, and possibly push the end up.
+	/*
+	 * We look at the histogram and adjust the gamma curve in the following
+	 * ways: 1. Adjust the gamma curve so as to pull the start of the
+	 * histogram down, and possibly push the end up.
+	 */
 	Pwl gammaCurve = config_.gammaCurve;
 	if (config_.ceEnable) {
 		if (config_.loMax != 0 || config_.hiMax != 0)
 			gammaCurve = computeStretchCurve(histogram, config_).compose(gammaCurve);
-		// We could apply other adjustments (e.g. partial equalisation)
-		// based on the histogram...?
+		/*
+		 * We could apply other adjustments (e.g. partial equalisation)
+		 * based on the histogram...?
+		 */
 	}
-	// 2. Finally apply any manually selected brightness/contrast
-	// adjustment.
+	/*
+	 * 2. Finally apply any manually selected brightness/contrast
+	 * adjustment.
+	 */
 	if (brightness_ != 0 || contrast_ != 1.0)
 		gammaCurve = applyManualContrast(gammaCurve, brightness_, contrast_);
-	// And fill in the status for output. Use more points towards the bottom
-	// of the curve.
+	/*
+	 * And fill in the status for output. Use more points towards the bottom
+	 * of the curve.
+	 */
 	ContrastStatus status;
 	fillInStatus(status, brightness_, contrast_, gammaCurve);
 	{
@@ -173,7 +191,7 @@ void Contrast::process(StatisticsPtr &stats,
 	}
 }
 
-// Register algorithm with the system.
+/* Register algorithm with the system. */
 static Algorithm *create(Controller *controller)
 {
 	return (Algorithm *)new Contrast(controller);
diff --git a/src/ipa/raspberrypi/controller/rpi/contrast.hpp b/src/ipa/raspberrypi/controller/rpi/contrast.hpp
index 5a6d530f..4793dedc 100644
--- a/src/ipa/raspberrypi/controller/rpi/contrast.hpp
+++ b/src/ipa/raspberrypi/controller/rpi/contrast.hpp
@@ -13,8 +13,10 @@
 
 namespace RPiController {
 
-// Back End algorithm to appaly correct digital gain. Should be placed after
-// Back End AWB.
+/*
+ * Back End algorithm to appaly correct digital gain. Should be placed after
+ * Back End AWB.
+ */
 
 struct ContrastConfig {
 	bool ceEnable;
@@ -47,4 +49,4 @@ private:
 	std::mutex mutex_;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/rpi/dpc.cpp b/src/ipa/raspberrypi/controller/rpi/dpc.cpp
index 42154cf3..68ba5e3e 100644
--- a/src/ipa/raspberrypi/controller/rpi/dpc.cpp
+++ b/src/ipa/raspberrypi/controller/rpi/dpc.cpp
@@ -14,8 +14,10 @@ using namespace libcamera;
 
 LOG_DEFINE_CATEGORY(RPiDpc)
 
-// We use the lux status so that we can apply stronger settings in darkness (if
-// necessary).
+/*
+ * We use the lux status so that we can apply stronger settings in darkness (if
+ * necessary).
+ */
 
 #define NAME "rpi.dpc"
 
@@ -39,13 +41,13 @@ void Dpc::read(boost::property_tree::ptree const &params)
 void Dpc::prepare(Metadata *imageMetadata)
 {
 	DpcStatus dpcStatus = {};
-	// Should we vary this with lux level or analogue gain? TBD.
+	/* Should we vary this with lux level or analogue gain? TBD. */
 	dpcStatus.strength = config_.strength;
 	LOG(RPiDpc, Debug) << "strength " << dpcStatus.strength;
 	imageMetadata->set("dpc.status", dpcStatus);
 }
 
-// Register algorithm with the system.
+/* Register algorithm with the system. */
 static Algorithm *create(Controller *controller)
 {
 	return (Algorithm *)new Dpc(controller);
diff --git a/src/ipa/raspberrypi/controller/rpi/dpc.hpp b/src/ipa/raspberrypi/controller/rpi/dpc.hpp
index 039310cc..048fa2b8 100644
--- a/src/ipa/raspberrypi/controller/rpi/dpc.hpp
+++ b/src/ipa/raspberrypi/controller/rpi/dpc.hpp
@@ -11,7 +11,7 @@
 
 namespace RPiController {
 
-// Back End algorithm to apply appropriate GEQ settings.
+/* Back End algorithm to apply appropriate GEQ settings. */
 
 struct DpcConfig {
 	int strength;
@@ -29,4 +29,4 @@ private:
 	DpcConfig config_;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/rpi/geq.cpp b/src/ipa/raspberrypi/controller/rpi/geq.cpp
index 0da5efdf..14f226cf 100644
--- a/src/ipa/raspberrypi/controller/rpi/geq.cpp
+++ b/src/ipa/raspberrypi/controller/rpi/geq.cpp
@@ -18,8 +18,10 @@ using namespace libcamera;
 
 LOG_DEFINE_CATEGORY(RPiGeq)
 
-// We use the lux status so that we can apply stronger settings in darkness (if
-// necessary).
+/*
+ * We use the lux status so that we can apply stronger settings in darkness (if
+ * necessary).
+ */
 
 #define NAME "rpi.geq"
 
@@ -50,7 +52,7 @@ void Geq::prepare(Metadata *imageMetadata)
 	if (imageMetadata->get("lux.status", luxStatus))
 		LOG(RPiGeq, Warning) << "no lux data found";
 	DeviceStatus deviceStatus;
-	deviceStatus.analogueGain = 1.0; // in case not found
+	deviceStatus.analogueGain = 1.0; /* in case not found */
 	if (imageMetadata->get("device.status", deviceStatus))
 		LOG(RPiGeq, Warning)
 			<< "no device metadata - use analogue gain of 1x";
@@ -71,7 +73,7 @@ void Geq::prepare(Metadata *imageMetadata)
 	imageMetadata->set("geq.status", geqStatus);
 }
 
-// Register algorithm with the system.
+/* Register algorithm with the system. */
 static Algorithm *create(Controller *controller)
 {
 	return (Algorithm *)new Geq(controller);
diff --git a/src/ipa/raspberrypi/controller/rpi/geq.hpp b/src/ipa/raspberrypi/controller/rpi/geq.hpp
index bdbc55b2..5ea424fc 100644
--- a/src/ipa/raspberrypi/controller/rpi/geq.hpp
+++ b/src/ipa/raspberrypi/controller/rpi/geq.hpp
@@ -11,12 +11,12 @@
 
 namespace RPiController {
 
-// Back End algorithm to apply appropriate GEQ settings.
+/* Back End algorithm to apply appropriate GEQ settings. */
 
 struct GeqConfig {
 	uint16_t offset;
 	double slope;
-	Pwl strength; // lux to strength factor
+	Pwl strength; /* lux to strength factor */
 };
 
 class Geq : public Algorithm
@@ -31,4 +31,4 @@ private:
 	GeqConfig config_;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/rpi/lux.cpp b/src/ipa/raspberrypi/controller/rpi/lux.cpp
index 739a3d53..a76ec729 100644
--- a/src/ipa/raspberrypi/controller/rpi/lux.cpp
+++ b/src/ipa/raspberrypi/controller/rpi/lux.cpp
@@ -25,8 +25,10 @@ LOG_DEFINE_CATEGORY(RPiLux)
 Lux::Lux(Controller *controller)
 	: Algorithm(controller)
 {
-	// Put in some defaults as there will be no meaningful values until
-	// Process has run.
+	/*
+	 * Put in some defaults as there will be no meaningful values until
+	 * Process has run.
+	 */
 	status_.aperture = 1.0;
 	status_.lux = 400;
 }
@@ -71,7 +73,7 @@ void Lux::process(StatisticsPtr &stats, Metadata *imageMetadata)
 				    sizeof(stats->hist[0].g_hist[0]);
 		for (int i = 0; i < numBins; i++)
 			sum += bin[i] * (uint64_t)i, num += bin[i];
-		// add .5 to reflect the mid-points of bins
+		/* add .5 to reflect the mid-points of bins */
 		double currentY = sum / (double)num + .5;
 		double gainRatio = referenceGain_ / currentGain;
 		double shutterSpeedRatio =
@@ -89,14 +91,16 @@ void Lux::process(StatisticsPtr &stats, Metadata *imageMetadata)
 			std::unique_lock<std::mutex> lock(mutex_);
 			status_ = status;
 		}
-		// Overwrite the metadata here as well, so that downstream
-		// algorithms get the latest value.
+		/*
+		 * Overwrite the metadata here as well, so that downstream
+		 * algorithms get the latest value.
+		 */
 		imageMetadata->set("lux.status", status);
 	} else
 		LOG(RPiLux, Warning) << ": no device metadata";
 }
 
-// Register algorithm with the system.
+/* Register algorithm with the system. */
 static Algorithm *create(Controller *controller)
 {
 	return (Algorithm *)new Lux(controller);
diff --git a/src/ipa/raspberrypi/controller/rpi/lux.hpp b/src/ipa/raspberrypi/controller/rpi/lux.hpp
index bd49a409..5488299b 100644
--- a/src/ipa/raspberrypi/controller/rpi/lux.hpp
+++ b/src/ipa/raspberrypi/controller/rpi/lux.hpp
@@ -13,7 +13,7 @@
 #include "../lux_status.h"
 #include "../algorithm.hpp"
 
-// This is our implementation of the "lux control algorithm".
+/* This is our implementation of the "lux control algorithm". */
 
 namespace RPiController {
 
@@ -28,16 +28,18 @@ public:
 	void setCurrentAperture(double aperture);
 
 private:
-	// These values define the conditions of the reference image, against
-	// which we compare the new image.
+	/*
+	 * These values define the conditions of the reference image, against
+	 * which we compare the new image.
+	 */
 	libcamera::utils::Duration referenceShutterSpeed_;
 	double referenceGain_;
-	double referenceAperture_; // units of 1/f
-	double referenceY_; // out of 65536
+	double referenceAperture_; /* units of 1/f */
+	double referenceY_; /* out of 65536 */
 	double referenceLux_;
 	double currentAperture_;
 	LuxStatus status_;
 	std::mutex mutex_;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/rpi/noise.cpp b/src/ipa/raspberrypi/controller/rpi/noise.cpp
index 97b0fd05..5d87822e 100644
--- a/src/ipa/raspberrypi/controller/rpi/noise.cpp
+++ b/src/ipa/raspberrypi/controller/rpi/noise.cpp
@@ -34,8 +34,10 @@ char const *Noise::name() const
 void Noise::switchMode(CameraMode const &cameraMode,
 		       [[maybe_unused]] Metadata *metadata)
 {
-	// For example, we would expect a 2x2 binned mode to have a "noise
-	// factor" of sqrt(2x2) = 2. (can't be less than one, right?)
+	/*
+	 * For example, we would expect a 2x2 binned mode to have a "noise
+	 * factor" of sqrt(2x2) = 2. (can't be less than one, right?)
+	 */
 	modeFactor_ = std::max(1.0, cameraMode.noiseFactor);
 }
 
@@ -48,14 +50,16 @@ void Noise::read(boost::property_tree::ptree const &params)
 void Noise::prepare(Metadata *imageMetadata)
 {
 	struct DeviceStatus deviceStatus;
-	deviceStatus.analogueGain = 1.0; // keep compiler calm
+	deviceStatus.analogueGain = 1.0; /* keep compiler calm */
 	if (imageMetadata->get("device.status", deviceStatus) == 0) {
-		// There is a slight question as to exactly how the noise
-		// profile, specifically the constant part of it, scales. For
-		// now we assume it all scales the same, and we'll revisit this
-		// if it proves substantially wrong.  NOTE: we may also want to
-		// make some adjustments based on the camera mode (such as
-		// binning), if we knew how to discover it...
+		/*
+		 * There is a slight question as to exactly how the noise
+		 * profile, specifically the constant part of it, scales. For
+		 * now we assume it all scales the same, and we'll revisit this
+		 * if it proves substantially wrong.  NOTE: we may also want to
+		 * make some adjustments based on the camera mode (such as
+		 * binning), if we knew how to discover it...
+		 */
 		double factor = sqrt(deviceStatus.analogueGain) / modeFactor_;
 		struct NoiseStatus status;
 		status.noiseConstant = referenceConstant_ * factor;
@@ -68,7 +72,7 @@ void Noise::prepare(Metadata *imageMetadata)
 		LOG(RPiNoise, Warning) << " no metadata";
 }
 
-// Register algorithm with the system.
+/* Register algorithm with the system. */
 static Algorithm *create(Controller *controller)
 {
 	return new Noise(controller);
diff --git a/src/ipa/raspberrypi/controller/rpi/noise.hpp b/src/ipa/raspberrypi/controller/rpi/noise.hpp
index ed6ffe91..56a4707b 100644
--- a/src/ipa/raspberrypi/controller/rpi/noise.hpp
+++ b/src/ipa/raspberrypi/controller/rpi/noise.hpp
@@ -9,7 +9,7 @@
 #include "../algorithm.hpp"
 #include "../noise_status.h"
 
-// This is our implementation of the "noise algorithm".
+/* This is our implementation of the "noise algorithm". */
 
 namespace RPiController {
 
@@ -23,10 +23,10 @@ public:
 	void prepare(Metadata *imageMetadata) override;
 
 private:
-	// the noise profile for analogue gain of 1.0
+	/* the noise profile for analogue gain of 1.0 */
 	double referenceConstant_;
 	double referenceSlope_;
 	double modeFactor_;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/rpi/sdn.cpp b/src/ipa/raspberrypi/controller/rpi/sdn.cpp
index 480da38d..2f6b8764 100644
--- a/src/ipa/raspberrypi/controller/rpi/sdn.cpp
+++ b/src/ipa/raspberrypi/controller/rpi/sdn.cpp
@@ -17,8 +17,10 @@ using namespace libcamera;
 
 LOG_DEFINE_CATEGORY(RPiSdn)
 
-// Calculate settings for the spatial denoise block using the noise profile in
-// the image metadata.
+/*
+ * Calculate settings for the spatial denoise block using the noise profile in
+ * the image metadata.
+ */
 
 #define NAME "rpi.sdn"
 
@@ -45,7 +47,7 @@ void Sdn::initialise()
 void Sdn::prepare(Metadata *imageMetadata)
 {
 	struct NoiseStatus noiseStatus = {};
-	noiseStatus.noiseSlope = 3.0; // in case no metadata
+	noiseStatus.noiseSlope = 3.0; /* in case no metadata */
 	if (imageMetadata->get("noise.status", noiseStatus) != 0)
 		LOG(RPiSdn, Warning) << "no noise profile found";
 	LOG(RPiSdn, Debug)
@@ -65,11 +67,11 @@ void Sdn::prepare(Metadata *imageMetadata)
 
 void Sdn::setMode(DenoiseMode mode)
 {
-	// We only distinguish between off and all other modes.
+	/* We only distinguish between off and all other modes. */
 	mode_ = mode;
 }
 
-// Register algorithm with the system.
+/* Register algorithm with the system. */
 static Algorithm *create(Controller *controller)
 {
 	return (Algorithm *)new Sdn(controller);
diff --git a/src/ipa/raspberrypi/controller/rpi/sdn.hpp b/src/ipa/raspberrypi/controller/rpi/sdn.hpp
index d9b18f29..8b6e3db1 100644
--- a/src/ipa/raspberrypi/controller/rpi/sdn.hpp
+++ b/src/ipa/raspberrypi/controller/rpi/sdn.hpp
@@ -11,7 +11,7 @@
 
 namespace RPiController {
 
-// Algorithm to calculate correct spatial denoise (SDN) settings.
+/* Algorithm to calculate correct spatial denoise (SDN) settings. */
 
 class Sdn : public DenoiseAlgorithm
 {
@@ -29,4 +29,4 @@ private:
 	DenoiseMode mode_;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/rpi/sharpen.cpp b/src/ipa/raspberrypi/controller/rpi/sharpen.cpp
index 3fe62bc8..9b7f903a 100644
--- a/src/ipa/raspberrypi/controller/rpi/sharpen.cpp
+++ b/src/ipa/raspberrypi/controller/rpi/sharpen.cpp
@@ -33,7 +33,7 @@ char const *Sharpen::name() const
 void Sharpen::switchMode(CameraMode const &cameraMode,
 			 [[maybe_unused]] Metadata *metadata)
 {
-	// can't be less than one, right?
+	/* can't be less than one, right? */
 	modeFactor_ = std::max(1.0, cameraMode.noiseFactor);
 }
 
@@ -50,24 +50,30 @@ void Sharpen::read(boost::property_tree::ptree const &params)
 
 void Sharpen::setStrength(double strength)
 {
-	// Note that this function is how an application sets the overall
-	// sharpening "strength". We call this the "user strength" field
-	// as there already is a strength_ field - being an internal gain
-	// parameter that gets passed to the ISP control code. Negative
-	// values are not allowed - coerce them to zero (no sharpening).
+	/*
+	 * Note that this function is how an application sets the overall
+	 * sharpening "strength". We call this the "user strength" field
+	 * as there already is a strength_ field - being an internal gain
+	 * parameter that gets passed to the ISP control code. Negative
+	 * values are not allowed - coerce them to zero (no sharpening).
+	 */
 	userStrength_ = std::max(0.0, strength);
 }
 
 void Sharpen::prepare(Metadata *imageMetadata)
 {
-	// The userStrength_ affects the algorithm's internal gain directly, but
-	// we adjust the limit and threshold less aggressively. Using a sqrt
-	// function is an arbitrary but gentle way of accomplishing this.
+	/*
+	 * The userStrength_ affects the algorithm's internal gain directly, but
+	 * we adjust the limit and threshold less aggressively. Using a sqrt
+	 * function is an arbitrary but gentle way of accomplishing this.
+	 */
 	double userStrengthSqrt = sqrt(userStrength_);
 	struct SharpenStatus status;
-	// Binned modes seem to need the sharpening toned down with this
-	// pipeline, thus we use the modeFactor_ here. Also avoid
-	// divide-by-zero with the userStrengthSqrt.
+	/*
+	 * Binned modes seem to need the sharpening toned down with this
+	 * pipeline, thus we use the modeFactor_ here. Also avoid
+	 * divide-by-zero with the userStrengthSqrt.
+	 */
 	status.threshold = threshold_ * modeFactor_ /
 			   std::max(0.01, userStrengthSqrt);
 	status.strength = strength_ / modeFactor_ * userStrength_;
@@ -77,7 +83,7 @@ void Sharpen::prepare(Metadata *imageMetadata)
 	imageMetadata->set("sharpen.status", status);
 }
 
-// Register algorithm with the system.
+/* Register algorithm with the system. */
 static Algorithm *create(Controller *controller)
 {
 	return new Sharpen(controller);
diff --git a/src/ipa/raspberrypi/controller/rpi/sharpen.hpp b/src/ipa/raspberrypi/controller/rpi/sharpen.hpp
index ced917f3..18c45fd4 100644
--- a/src/ipa/raspberrypi/controller/rpi/sharpen.hpp
+++ b/src/ipa/raspberrypi/controller/rpi/sharpen.hpp
@@ -9,7 +9,7 @@
 #include "../sharpen_algorithm.hpp"
 #include "../sharpen_status.h"
 
-// This is our implementation of the "sharpen algorithm".
+/* This is our implementation of the "sharpen algorithm". */
 
 namespace RPiController {
 
@@ -31,4 +31,4 @@ private:
 	double userStrength_;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/sharpen_algorithm.hpp b/src/ipa/raspberrypi/controller/sharpen_algorithm.hpp
index 888f4569..22cc6090 100644
--- a/src/ipa/raspberrypi/controller/sharpen_algorithm.hpp
+++ b/src/ipa/raspberrypi/controller/sharpen_algorithm.hpp
@@ -14,8 +14,8 @@ class SharpenAlgorithm : public Algorithm
 {
 public:
 	SharpenAlgorithm(Controller *controller) : Algorithm(controller) {}
-	// A sharpness control algorithm must provide the following:
+	/* A sharpness control algorithm must provide the following: */
 	virtual void setStrength(double strength) = 0;
 };
 
-} // namespace RPiController
+} /* namespace RPiController */
diff --git a/src/ipa/raspberrypi/controller/sharpen_status.h b/src/ipa/raspberrypi/controller/sharpen_status.h
index 2b049074..5ea21ab2 100644
--- a/src/ipa/raspberrypi/controller/sharpen_status.h
+++ b/src/ipa/raspberrypi/controller/sharpen_status.h
@@ -6,20 +6,20 @@
  */
 #pragma once
 
-// The "sharpen" algorithm stores the strength to use.
+/* The "sharpen" algorithm stores the strength to use. */
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
 struct SharpenStatus {
-	// controls the smallest level of detail (or noise!) that sharpening will pick up
+	/* controls the smallest level of detail (or noise!) that sharpening will pick up */
 	double threshold;
-	// the rate at which the sharpening response ramps once above the threshold
+	/* the rate at which the sharpening response ramps once above the threshold */
 	double strength;
-	// upper limit of the allowed sharpening response
+	/* upper limit of the allowed sharpening response */
 	double limit;
-	// The sharpening strength requested by the user or application.
+	/* The sharpening strength requested by the user or application. */
 	double userStrength;
 };
 
diff --git a/src/ipa/raspberrypi/md_parser.hpp b/src/ipa/raspberrypi/md_parser.hpp
index 298d5181..c9aeed2c 100644
--- a/src/ipa/raspberrypi/md_parser.hpp
+++ b/src/ipa/raspberrypi/md_parser.hpp
@@ -152,4 +152,4 @@ private:
 	OffsetMap offsets_;
 };
 
-} // namespace RPi
+} /* namespace RPi */