diff options
| author | David Plowman <david.plowman@raspberrypi.com> | 2021-03-08 22:39:38 +0000 |
|---|---|---|
| committer | Laurent Pinchart <laurent.pinchart@ideasonboard.com> | 2021-03-09 00:54:23 +0200 |
| commit | 8f3a54ae6a53076ebba44b13dbe237e348bd6d27 (patch) | |
| tree | 0c7858e483db46f4a5476130ecbe8bce096abb40 /Documentation/guides/introduction.rst | |
| parent | 18691c538b9dad777bd61fe8400289298c78ac10 (diff) | |
ipa: raspberrypi: Add support for imx290/imx327 sensors
imx290 and imx327 share the same kernel driver (imx290.c) and are
therefore both recognised here as "imx290". We add the necessary
CamHelper for these sensors, as well as a camera tuning file.
The tuning was done with an Innomaker STARVIS IMX327LQR module. These
have no IR cut filter so there is no proper colour tuning. However,
you should obtain reasonable results for most modules using this
sensor. Specific tunings for further modules can always be added
subsequently.
To use this sensor on the Raspberry Pi platform, please add
dtoverlay=imx290,clock-frequency=74250000
into your /boot/config.txt file.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Diffstat (limited to 'Documentation/guides/introduction.rst')
0 files changed, 0 insertions, 0 deletions