summaryrefslogtreecommitdiff
path: root/utils
AgeCommit message (Collapse)Author
2024-07-05libtuning: agc: rkisp1: Increase y-targetStefan Klug
With the addition of gamma out correction the relative luminance target was set too low. As brightness is a bit subjective it is difficult to come up with the "correct" value. With 0.5 the patch 22 on the macbeth chart (neutral grey, 18% reflectance) ended up a bit below 50% grey, which seems reasonable. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-07-05libtuning: lsc: Prevent negative valuesStefan Klug
In cases where the calibration image contains super dark areas, or when an invalid blacklevel was supplied, the grid might get close to zero or negative. This would have bad effects on the 1/grid later. So clamp the values to a small positive number. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-07-05libtuning: lsc: rkisp1: Do not calculate ratios to greenStefan Klug
The current LSC algorithm for the rkisp1 just forwards the LSC tables to the hardware, so absolute factors are needed and not ratios compared to green. Therefore every channel needs to be calculated independently. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-07-05tuning: rkisp1: Add some static modulesStefan Klug
Add awb, blc, cproc, filter, and gamma to the tuning file. These don't need any configuration. At the moment there are no inter-module dependencies in the tuning process. We can therefore safely sort them alphabetically. As soon as the first dependency gets introduced (most likely lsc -> ccm) we will see how to solve that. The output order controls the order of processing in the IPA. It is now also in alphabetical order which happens to be no change for the modules that existed previously. For the others, there is no need for a specific order. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-07-05libtuning: Add static moduleStefan Klug
Add a static module class, that can be used to add static data to the tuning file. This is propably not the best solution, but allows us to progress without writing lots of dummy classes for static cases. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-07-05libtuning: Only warn if processing returns NoneStefan Klug
There are valid cases where a module returns None. E.g. no images were provided for LSC calibration. We should however define proper semantics there. Continue with a warning for now. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-07-05libtuning: Handle cases, where no lsc tuning images are presentStefan Klug
Make it clear that no lsc calibration was done by returning None instead of a incomplete configuration. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-07-05libtuning: modules: Add initial CCM modulePaul Elder
Implement a minimal ccm calibration module. For now it doesn't take the results from lsc into account and supports rkisp1 only. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-07-05libtuning: Remove need for Cam object from ccmStefan Klug
Remove the need for the Cam object, as we don't want to port it from Raspberry Pi. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-07-05libtuning: Use the color member of the Image classStefan Klug
In the Image class the variable holding the color temperature is named color instead of col which was used by the raspberry pi scripts. Rename accordingly. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-07-05libtuning: lsc: rkisp1: Clip lsc values to valid rangeStefan Klug
Based on the input images, the lsc values could exceed the range allowed by the rkisp1. As we are now clipping the values, we can simplify the value mapping. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-07-05libtuning: Be a bit more verboseStefan Klug
Print a info on every image that gets processed and a warning on every image that gets ignored. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-07-05libtuning: Reactivate macbeth locatorStefan Klug
Add the missing pieces and store the result inside the image object. This solution is not very nice, and should be refactored soon. For that we need a concept to collect temperature and/or image specific results in a central place. For now it serves the purpose. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-07-05libtuning: Implement a minimal yaml parserStefan Klug
At the moment this just reads the yaml file and returns it verbatim. This needs to evolve further in the near future. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-07-05libtuning: Improve filename parsingStefan Klug
In the tuning datasets, the files had names like 'imx335_1600l_3000k_1.dng'. That failed on the old filename parsing function. As there is no need to dictate the order of the tags, split the big regex into chunks and parse them one by one. This also makes the code easier to digest. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-07-05libtuning: Fix visualize_macbeth_chart()Stefan Klug
The old function uses PIL to save the image, which is not in the requirements file. As we are already requiring opencv, use that to save images instead of an additional dependency Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-07-05libtuning: Migrate prints to python logging frameworkStefan Klug
In ctt_ccm.py the logging functionality of the Cam object was used. As we don't want to port over that class, it needs to be replaced anyways. While at it, also replace the eprint function as it doesn't add any value over the logging framework and misses the ability for easy log formatting. For nice output formatting add the coloredlogs library. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-07-05libtuning: Fix importsStefan Klug
Fix imports to match new structure in the files copied from Raspberry Pi. Add missing imports in macbeth.py. Add missing dependencies to requirements.txt. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-07-05utils: tuning: Add requirements file and update readmeStefan Klug
Add a requirements file to ease the installation and use of the tuning scripts. Document that in the readme. No debian packages are provided as rawpy is not packaged as deb. So pip has to be used anyways. Also add pyyaml which was missing in the dependencies. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2024-07-05libtuning: Copy visualize_macbeth_chart from raspberry piStefan Klug
Copy visualize_macbeth_chart from raspberry pi. It is copied verbatim and does not work in this state. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Paul Elder <paul.elder@ideasonboard.com>
2024-07-05libtuning: Copy files from raspberrypiStefan Klug
Copy ctt_{awb,ccm,colors,ransac} from the raspberrypi tuning scripts as basis for the libcamera implementation. color.py was renamed to ctt_colors.py to better express the origin. The files were taken from commit 66479605baca ("utils: raspberrypi: ctt: Improve the Macbeth Chart search reliability"). Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Acked-by: Paul Elder <paul.elder@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-07-05libtuning: Fix reference imageStefan Klug
Opencv fails to load the image. The added license destroys the magic number. Fix, by moving the licence below the magic number. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul ELder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-07-05libtuning: Backport improvements in MacBeth search reliabilityStefan Klug
Port commit 66479605baca ("utils: raspberrypi: ctt: Improve the Macbeth Chart search reliability") into libtuning. Previously the code would brighten up images in case the Macbeth Chart is slightly dark, and also zoom in on sections of it to look for charts occupying less of the field of view. But it would not do both together. This change makes the search for smaller charts also repeat that search for the brightened up images that it made earlier, thereby increasing the chances of success for non-optimal tuning images. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-29utils: libtuning: Correct GBRG Image parsingDaniel Scally
The Image class incorrectly parses data in GBRG bayer formats as the indices to the channels are set incorrectly - fix it. Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-14utils: tuning: rkisp1: Add skeletal AGC to the rkisp1 tuning scriptPaul Elder
Add the skeletal AGC module to the rkisp1 tuning script. For now it just spits out hardcoded values. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-06-14utils: libtuning: modules: Add skeletal AGC modulePaul Elder
Add a skeletal AGC module just so that we can have some AGC tuning values that we can use to test during development of AGC in the IPAs. As rkisp1 is the main target, we only add support for rkisp1 for now. The parameters are mostly copied from the hardcoded values in ctt, except for the metering modes. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-13utils: raspberrypi: ctt: Add a maximum gain parameter for LSCDavid Plowman
A max_gain parameter is added to the config file which we pass to the lens shading calibration. This clamps the maximum luminance gain that gets written into the tuning files so as to prevent overflows. It is particularly useful for lenses that cut off the light completely from the sensor corners, and allows usable tables to be generated for them. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-13utils: raspberrypi: ctt: Add option to convert between vc4/pisp targetsNaushir Patuck
This change adds functionality to the convert_tuning.py script to convert between vc4 and pisp target tuning files. The conversion is done on a best effort basis, and should provide functional tuning files. However, a full tuning for the target platform is always preferred. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-13utils: raspberrypi: ctt: Update tuning tool for HDRDavid Plowman
The various boilerplate parts of the tuning file are extended to include the necessary extra bits for HDR, specifically: * rpi.denoise has different configurations for HDR modes * rpi.agc now has extra channels for HDR * rpi.hdr parameters are added. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-13utils: raspberrypi: ctt: Changed CTT handling of VC4 and PiSPBen Benson
Changed how users select which platform to tune for. Now users specify a command line argument, '-t', to specify which target platform. Signed-off-by: Ben Benson <ben.benson@raspberrypi.com> Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-13utils: raspberrypi: ctt: Added CAC support to the CTTBen Benson
Added the ability to tune the chromatic aberration correction within the ctt. There are options for cac_only or to tune as part of a larger tuning process. CTT will now recognise any files that begin with "cac" as being chromatic aberration tuning files. Signed-off-by: Ben Benson <ben.benson@raspberrypi.com> Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-13utils: raspberrypi: ctt: Adapt tuning tool for both VC4 and PiSPDavid Plowman
The old ctt.py and alsc_only.py scripts are removed. Instead of ctt.py use ctt_vc4.py or ctt_pisp.py, depending on your target platform. Instead of alsc_only.py use alsc_vc4.py or alsc_pisp.py, again according to your platform. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-06-03update-kernel-headers: Add linux/udmabuf.h to headers to syncHans de Goede
linux/udmabuf.h will be used by upcoming DmaBufAllocator changes and it is not available on some older kernels. Add it to the headers to sync. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-31utils: checkstyle.py: Show location of coding style issue within lineLaurent Pinchart
The issue checkers display the line number and line content of each offending line, but don't show the location of the issue within a line. Improve checkstyle by adding a marker that points to the exact location. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-31utils: checkstyle.py: Add a check for hex valuesLaurent Pinchart
libcamera uses lowercase hex values. Add a corresponding checker. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Milan Zamazal <mzamazal@redhat.com>
2024-05-31utils: checkstyle.py: Extend IncludeChecker to cover math.hLaurent Pinchart
math.h is an exception to the C compatibility header rule, as we prefer using cmath. Extend the IncludeCheck to warn about it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-31utils: checkstyle.py: Refactor IncludeCheckerLaurent Pinchart
The IncludeCheck warns when code uses C++ standard library headers where corresponding C compatibility headers are preferred. We have an exception to that rule for math.h, where cmath is prefered. In order to prepare for extending checkstyle.py to enforce that rule, refactor the way the IncludeChecker identifies headers. No functional change is intended. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-09libcamera: Drop remaining file name from header comment blocksLaurent Pinchart
Source files in libcamera start by a comment block header, which includes the file name and a one-line description of the file contents. While the latter is useful to get a quick overview of the file contents at a glance, the former is mostly a source of inconvenience. The name in the comments can easily get out of sync with the file name when files are renamed, and copy & paste during development have often lead to incorrect names being used to start with. Readers of the source code are expected to know which file they're looking it. Drop the file name from the header comment blocks in all remaining locations that were not caught by the automated script as they are out of sync with the file name. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-05-09libcamera: Drop file name from header comment blocks in templatesLaurent Pinchart
Source files in libcamera start by a comment block header, which includes the file name and a one-line description of the file contents. While the latter is useful to get a quick overview of the file contents at a glance, the former is mostly a source of inconvenience. The name in the comments can easily get out of sync with the file name when files are renamed, and copy & paste during development have often lead to incorrect names being used to start with. Readers of the source code are expected to know which file they're looking it. Drop the file name from the header comment blocks in template files and templates embedded in generator scripts. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-05-08libcamera: Drop file name from header comment blocksLaurent Pinchart
Source files in libcamera start by a comment block header, which includes the file name and a one-line description of the file contents. While the latter is useful to get a quick overview of the file contents at a glance, the former is mostly a source of inconvenience. The name in the comments can easily get out of sync with the file name when files are renamed, and copy & paste during development have often lead to incorrect names being used to start with. Readers of the source code are expected to know which file they're looking it. Drop the file name from the header comment block. The change was generated with the following script: ---------------------------------------- dirs="include/libcamera src test utils" declare -rA patterns=( ['c']=' \* ' ['cpp']=' \* ' ['h']=' \* ' ['py']='# ' ['sh']='# ' ) for ext in ${!patterns[@]} ; do files=$(for dir in $dirs ; do find $dir -name "*.${ext}" ; done) pattern=${patterns[${ext}]} for file in $files ; do name=$(basename ${file}) sed -i "s/^\(${pattern}\)${name} - /\1/" "$file" done done ---------------------------------------- This misses several files that are out of sync with the comment block header. Those will be addressed separately and manually. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-05-08libcamera: controls: Generate enum value-name mapsDaniel Scally
Generate maps for each control enum which associate strings that represent the enum values with the values themselves. This change will allow us to refer to enumerated control values using the string. For example if we want to pass variables to an algorithm for use when a control has a particular value we can embed within tuning files a dictionary that uses the control values as keys. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-20libcamera: Fix output spelling errorUmang Jain
There are two places where "output" is spelled as "ouput". Fix it. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-19utils: checkstyle.py: Drop period at end of Doxygen one linersLaurent Pinchart
The libcamera documentation style calls for no period at the end of the Doxygen one-liner commands (\brief, \param and \return). Extend the DoxygenFormatter class to drop the period. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-19utils: checkstyle.py: Use r'' strings for regular expressionsLaurent Pinchart
It's a good practice to use r'' strings for regular expressions in Python, to avoid unexpected interaction with string escape sequences. Use them globally. This allows simplifying escaping in one of the regular expression strings. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-17ipu3: Use posix basenameKhem Raj
musl does not implement GNU basename extention and with latest musl the prototype from string.h is also removed [1] which now results in compile errors e.g. ../git/utils/ipu3/ipu3-pack.c:21:47: error: call to undeclared function 'basename'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] These utilities are using this function in usage() which is used just before program exit. Always use the basename APIs from libgen.h which is posix implementation [1] https://git.musl-libc.org/cgit/musl/commit/?id=725e17ed6dff4d0cd22487bb64470881e86a92e7 Signed-off-by: Khem Raj <raj.khem@gmail.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-13utils: ipc: Fix async main interface functions with no parametersPaul Elder
If an async main interface function is defined with no parameters, there would be a compilation error complaining about an extra comma. Fix this. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-10utils: ipc: Fix event functions with no parametersPaul Elder
If an event function is defined with no parameters, there would be a compilation error complaining about unused parameters in the generated code for the data and dataSize parameters that would normally correspond to serialized data. Fix this by simply marking the parameters as maybe_unused. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-03-19utils: tuning: readme: Improve names of dependency packagesPaul Elder
Change the names of python packages in the list of dependencies to the exact names that should be used in the pip install command. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-03-15checkstyle: Work around bug in difflibStefan Klug
If a file misses the newline at the end it gets detected by checkstyle, but the resulting patch is incorrect and does not apply. It took me a while to understand that it wasn't me using checkstyle incorrectly, but that the patch was faulty. The bug itself is in difflib and dates back to 2008. To reproduce: - Remove trailing newline from a file - git add the file - run ./utils/checkstyle.py -s | patch -p0 Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-03-11utils: checkstyle.py: Fix known_trailers sort orderHans de Goede
An unruly libcamera maintainer merged the wrong patch adding the Co-developed-by: tag to the known_trailers. Fix the sort order alphabetically to match the version which should have been merged. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>