| Age | Commit message (Collapse) | Author |
|---|
|
Add two new parameters, ipaConfig and result, to the
IPAInterface::configure() function to allow pipeline handlers to pass
custom data to their IPA, and receive data back. Wire this through the
code base. The C API interface will be addressed separately, likely
through automation of the C <-> C++ translation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a test to verify file creation with File::open(). The test is
expected to fail as the File::open() implementation is not correct.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add tests for the File::read() and File::write() functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add alignDownTo(), alignUpTo(), boundTo() and expandTo() helper
functions to the Size class. These are in-place versions of the existing
alignedDownTo(), alignedUpTo(), boundedTo() and expandedTo() functions.
The new helpers return a reference to the size, to allow chaining the
functions. One can thus write
size.alignDownTo(16, 16).alignUpTo(32, 32)
.boundTo({ 40, 80 }).expandTo({ 16, 80 });
instead of
size.alignDownTo(16, 16);
size.alignUpTo(32, 32);
size.boundTo({ 40, 80 });
size.expandTo({ 16, 80 });
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Pipeline handlers commonly have to calculate the minimum or maximum of
multiple sizes, or align a size's width and height. Add helper functions
to the Size class to perform those tasks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
v4l2-compliance and v4l2-ctl with version 1.20 and before will fail with
v4l2-compat. Check the versions of v4l2-compliance and v4l2-ctl before
continuing.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When a test is being run on a video device, there is output like so:
Testing /dev/video0 with uvcvideo driver...
and when it succeeds, "success" is appended:
Testing /dev/video0 with uvcvideo driver... success
On failure, however, the output of v4l2-compliance is printed before
"failure" is printed, resulting in the first line of the v4l2-compliance
output to be printed on the same line as the message:
Testing /dev/video2 with uvcvideo driver... v4l2-compliance SHA: not available, 64 bits
<v4l2-compliance output>
failure
Refactor the code to make "failure" print before the output of the test,
to prettify the output upon failure.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Test the V4L2 compatibility layer by running v4l2-compliance -s on every
/dev/video* device.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a map_keys() function to the utils namespace to extract keys from a
map.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Niklas: change return type to std::vector instead of std::set]
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the new Size::isNull() function through the code base to replace
manual checks. While the new code isn't equivalent, as isNull() checks
that both width and height are zero, it catches the same conditions in
practice.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
It's common for code to check if a size is null. Add a helper function
to do so.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Print format names defined in formats namespace instead of the hex
values in toString() as they are easier to comprehend. For this add
a property of 'name' in PixelFormatInfo' so as to map the formats
with their names. Print fourcc for formats which are not used in
libcamera.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the new pixel format constants to replace usage of macros from
drm_fourcc.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
This test checks the code-paths for camera's hotplugged and
unplugged support. It is based on bind/unbind of a UVC device
from sysfs. Hence, this test requires root permissions to run
and should have at least one already bound UVC device present
in the system.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The hex stream output helper was introduced in f391048a7b98 ("libcamera: utils:
Add hex stream output helper"). It simplifies writing hexadecimal values to an
ostream which can be used in this test too. As the helper doesn't modify the
stream configuration (refer to utils::hex() documentation), this eliminates the
need of restoring the stream's format state as pointed out by the coverity scan.
Reported-by: Coverity CID=279058
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
As the only usage of IPAManager::instance() is by the pipeline handlers
to call IPAManager::createIPA(), remove the former and make the latter
static. Update the pipeline handlers and tests accordingly.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
If any ipa_context instances are destroyed after the IPAManager is
destroyed, then a segfault will occur, since the modules have been
unloaded by the IPAManager and the context function pointers have been
freed.
Fix this by making the lifetime of the IPAManager explicit, and make the
CameraManager construct and deconstruct (automatically, via a unique
pointer) the IPAManager.
Also update the IPA interface test to do the construction and
deconstruction of the IPAManager, as it does not use the CameraManager.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Reported-by: Coverity CID=279091
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Reported-by: Coverity CID=279097
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The return value of write() function is ignored, causing the following
compiler error|warning with gcc version 5.4
error: ignoring return value of 'ssize_t write(int, const void*, size_t)'
Fix this by storing the return value of write() and return a test error in
case of failure.
Reported-by: Coverity CID=284605
Signed-off-by: Madhavan Krishnan <madhavan.krishnan@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a test for the newly added "fd move" constructor.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The IPA headers are installed into $prefix/include/libcamera/ipa/, but
are located in the source tree in include/ipa/. This requires files
within libcamera to include them with
#include <ipa/foo.h>
while a third party IPA would need to use
#include <libcamera/ipa/foo.h>
Not only is this inconsistent, it can create issues later if IPA headers
need to include each other, as the first form of include directive
wouldn't be valid once the headers are installed.
Fix the problem by moving the IPA headers to include/libcamera/ipa/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The libcamera internal headers are located in src/libcamera/include/.
The directory is added to the compiler headers search path with a meson
include_directories() directive, and internal headers are included with
(e.g. for the internal semaphore.h header)
#include "semaphore.h"
All was well, until libcxx decided to implement the C++20
synchronization library. The __threading_support header gained a
#include <semaphore.h>
to include the pthread's semaphore support. As include_directories()
adds src/libcamera/include/ to the compiler search path with -I, the
internal semaphore.h is included instead of the pthread version.
Needless to say, the compiler isn't happy.
Three options have been considered to fix this issue:
- Use -iquote instead of -I. The -iquote option instructs gcc to only
consider the header search path for headers included with the ""
version. Meson unfortunately doesn't support this option.
- Rename the internal semaphore.h header. This was deemed to be the
beginning of a long whack-a-mole game, where namespace clashes with
system libraries would appear over time (possibly dependent on
particular system configurations) and would need to be constantly
fixed.
- Move the internal headers to another directory to create a unique
namespace through path components. This causes lots of churn in all
the existing source files through the all project.
The first option would be best, but isn't available to us due to missing
support in meson. Even if -iquote support was added, we would need to
fix the problem before a new version of meson containing the required
support would be released.
The third option is thus the only practical solution available. Bite the
bullet, and do it, moving headers to include/libcamera/internal/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
In an attempt to clarify the license terms of all files in the libcamera
project, the build system files deserve particular attention. While they
describe how the binaries are created, they are not themselves
transformed into any part of binary distributions of the software, and
thus don't influence the copyright on the binary packages. They are
however subject to copyright, and thus influence the distribution terms
of the source packages.
Most of the meson.build files would not meet the threshold of
originality criteria required for copyright protection. Some of the more
complex meson.build files may be eligible for copyright protection. To
avoid any ambiguity and uncertainty, state our intent to not assert
copyrights on the build system files by putting them in the public
domain with the CC0-1.0 license.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Show Liu <show.liu@linaro.org>
|
|
Move the DRM/V4L2 format conversion code from V4L2VideoDevice to
V4L2PixelFormat. This is a more natural home for the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for camera sensor information in the libcamera IPA protocol.
Define a new 'struct ipa_sensor_info' structure in the IPA context and
use it to perform translation between the C and the C++ API.
Update the IPAInterface::configure() operation to accept a new
CameraSensorInfo parameter and port all users of that function to
the new interface.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Verify that the sensor model matches the expected value. The whole model
extraction heuristic isn't fully tested as that would require being able
to inject different entity names. It is still useful as an initial step.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The V4L2Device::getControls() function takes a ControlList that needs to
be pre-populated with dummy entries for the controls that need to be
read. This is a cumbersome API, especially when reading a single
control. Make it nicer by passing the list of V4L2 controls as a vector
of control IDs, and returning a ControlList.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Pass the vimc IPA dummy configuration file to the IPA init() function.
This will be used by the IPA to validate the init() call.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new IPASettings class to pass IPA initialization settings through
the IPAInterface::init() method. The settings currently only contain the
name of a configuration file, and are expected to be extended later.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The IPAModuleInfo::name field is currently a free-formed string that has
little use. Tighten its usage rules to make it suitable for building
file system paths to IPA-specific resources by matching the directory
name of the IPA module.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Two tests use the brightness, contrast and saturation controls with
integer failures. They were not updated by commit eff4b1aa01c1 which
turned those controls into floats. This doesn't cause test failures as
the control API converts the value types. For correctness, update the
tests to use float values.
Fixes: eff4b1aa01c1 ("libcamera: controls: Reorder and update description of existing controls")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Pointed out by Coverity DefectId=297074
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a utils::join() function to join elements of a container into a
string, with a separator and an optional conversion function if the
elements are not implicitly convertible to std::string.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The IPAModuleInfo license field isn't needed anymore now that modules
are cryptographically signed. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add tests for the File class API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add two new operations to the IPA interface to start and stop it. The
intention is that these functions shall be used by the IPA to perform
actions when the camera is started and stopped.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Print fourCC characters instead of the hex value in toString() as they are
more informative. Also, write the tests for this in formats.cpp
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When changing the VIMC IPA source file structure the path in the
ipa_module_test which needs access to the .so file was not updated, fix
that.
The omission was hard to spot as it requires a clean build of the
project as the old .so file is still in the build tree and the test
passes.
Fixes: a25533089bda04da ("ipa: Move vimc to a subdirectory")
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Test V4L2 array control using vivid control VIVID_CID_U8_4D_ARRAY.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add test cases for the string control type. As strings are implemented
as char arrays, arrays of strings are not supported.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
To prepare for storage of additional information in the ControlRange
structure, rename it to ControlInfo.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
To prepare for the rename of ControlRange to ControlInfo, rename all the
ControlInfoMap instance variables currently named info to infoMap. This
will help avoiding namespace clashes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
To achieve the goal of preventing unwanted conversion between a DRM and
a V4L2 FourCC, make the V4L2PixelFormat constructor that takes an
integer value explicit. All users of V4L2 pixel formats flagged by the
compiler are fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that the functions return a V4L2PixelFormat, adapt their name
accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The SizeRange constructors take minimum and maximum width and height
values as separate arguments. We have a Size class to convey size
information, use it in the constructors, and update the callers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Camera class currently requires the allocator to have no allocated
buffer before the camera is reconfigured, and the allocator to be
destroyed before the camera is released. There's no basis for these
restrictions anymore, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
To prepare for the rework of buffer allocation that will differentiate
export and allocation, rename exportBuffers() to allocateBuffers().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
There's no need to keep the video device open after allocating buffers,
as V4L2 supports buffer orphaning and the exported buffers will still be
usable. Close the device right after allocation to avoid the need for
delayed cleanups.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
To achieve the goal of preventing unwanted conversion between a DRM and
a V4L2 FourCC, make the PixelFormat constructor that takes an integer
value explicit. All users of pixel formats flagged by the compiler
are fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
