summaryrefslogtreecommitdiff
path: root/test
AgeCommit message (Collapse)Author
2019-04-18libcamera: geometry: Use Size to store min and max in SizeRangeLaurent Pinchart
Instead of storing four integers for the minimum and maximum width and height in the SizeRange class, use two instance of the Size class for the minimum and maximum sizes. While it at replace the mention of image size with size in the SizeRange documentation, as the Size class isn't limited to image sizes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-04-09libcamera: Switch to CameraConfigurationNiklas Söderlund
Implement the camera configuration thru out the library, tests, cam and qcam tools. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-04-05libcamera: camera: Add support for stream usagesNiklas Söderlund
Instead of requesting the default configuration for a set of streams where the application has to figure out which streams provided by the camera is best suited for its intended usage, have the library figure this out by using stream usages. The application asks the library for a list of streams and a suggested default configuration for them by supplying a list of stream usages. Once the list is retrieved the application can fine-tune the returned configuration and then try to apply it to the camera. Currently no pipeline handler is prepared to handle stream usages but nor did it make use of the list of Stream IDs which was the previous interface. The main reason for this is that all cameras currently only provide one stream each. This will still be the case but the API will be prepared to expand both pipeline handlers and applications to support streams usages. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-04-05libcamera: Make geometry.h a public headerNiklas Söderlund
Make the geometry header public so it can be used by the API facing applications. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-04-04test: camera: Remove test for bad Stream IDsNiklas Söderlund
In preparation of reworking how a default configuration is retrieved from a camera remove test that stream IDs must be valid as the data type passed to Camera::streamConfiguration() will change. This change is in preparation for an invasive change. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-04-04test: camera: Remove streams argument from configurationValid()Niklas Söderlund
In preparation of reworking how a default configuration is retrieved from a camera remove the streams and validation using the stream when judging if a camera configuration is valid. This is needed as once stream usage hints are added applications will no longer fetch default configuration based on Stream IDs so using them to verify the returned format is not useful. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-04-02libcamera: v4l2_subdevice: Rename deviceName() methodJacopo Mondi
Rename the 'deviceName()' method to 'entityName()' as it actually returns the name of the entity backing the v4l2 subdevice. While at it, make the names getter methods return a const reference instead of returning by copy. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-03-14test: camera: Add state machine testNiklas Söderlund
Add a test of the different access level enforced by the state machine inside the camera. The state machine aims to limit operations on the camera to the cameras state. The test exercises all states of the camera and verifies that only the intended operations are possible at each stage. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-03-14test: camera: Add capture testNiklas Söderlund
Correctly configure the camera using the default configuration and run a capture session for 100 milliseconds, which is plenty of time, in tests over 600 requests completed using the vimc pipeline. The test passes if at least the number of buffers used in the capture times two number of requests completes to prove we cycle through all buffers. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-03-14test: camera: Add setting of configuration testNiklas Söderlund
Try to set the default configuration, a modified valid configuration and an invalid configuration. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-03-14test: camera: Add read default configuration testNiklas Söderlund
Add a test to verify reading the default configuration from a camera works. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-03-02test: v4l2_subdevice: Add ListFormat testJacopo Mondi
Add test to list formats on a v4l2 subdevice. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-03-01test: v4l2_device: Add format handling testJacopo Mondi
Add test for V4L2Device set and get format methods. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-03-01test: v4l2_subdevice: Add format handling testJacopo Mondi
Add test for video format get and set operations on V4L2Subdevice class. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-02-13test: v4l2_device: Provide buffer sharing testKieran Bingham
Obtain two V4L2Devices and use one to obtain a BufferPool. Propagate the formats from the first to the second device and then commence sending buffers between the two devices in a ping-pong fashion. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-02-13test: v4l2_device: release capture device resourcesKieran Bingham
Ensure that the cleanup operation releases the device and resources. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-02-13test: v4l2_device: Rename dev_ to capture_Kieran Bingham
Change the variable name globally throughout the tests. Repair the V4L2DeviceTest constructor style, as checkstyle complained. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-02-13libcamera: v4l2_device: Simplify exportBuffers()Kieran Bingham
exportBuffers() can only operate on an existing BufferPool allocation. The pool identifies its size through its .count() method. Passing a count in to the exportBuffers() call is redundant and can be incorrect if the value is not the same as the BufferPool size. Simplify the function and remove the unnecessary argument, correcting all uses throughout the code base. While we're here, remove the createBuffers() helper from the V4L2DeviceTest which only served to obfuscate which pool the buffers were being allocated for. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-02-13test: v4l2_device: capture_async: End test at 30 framesKieran Bingham
The capture_async test was written to run for a fixed 5 second duration. Modify the test such that it runs until it has captured 30 frames, or a 10 second time out occurs. Running the capture_async test on an ARM64 platform using VIVID captures 30 frames in 6.15 seconds. There may be scope to optimise this speed by changing the format on the capture device. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-02-13test: v4l2_device: Use VIVID capture streamKieran Bingham
Utilise the VIVID capture device for testing the V4L2Device objects. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-02-13libcamera: signal: Disconnect signal automatically on slot deletionLaurent Pinchart
When a signal is connected to a member function slot, the slot is not disconnected when the slot object is deleted. This can lead to calling a member function of a deleted object if the signal isn't disconnected manually by the slot object's destructor. Make signal handling easier by implementing a base Object class that tracks all connected signals and disconnects from them automatically when the object is deleted, using template specialization resolution in the Signal class. As inheriting from the Object class may to a too harsh requirement for Signal usage in applications, keep the existing behaviour working if the slot doesn't inherit from the Object class. We may reconsider this later and require all slot objects to inherit from the Object class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-02-06test: v4l2_device: Provide asynchronous capture testKieran Bingham
Utilise the event_dispatcher to create a default event loop, and process asynchronous buffer receive events. If no frames are captured in 5 seconds, the test will fail. It will also fail if less than 30 frames have been captured in the same timeout period. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-02-06test: v4l2_device: Add StreamOn/StreamOff testKieran Bingham
Provide a small test to exercise the streamOn() and streamOff() calls. 8 buffers are requested locally. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-02-06test: v4l2_device: Add request_buffers testKieran Bingham
Add a utility to the test suite to request and allocate buffers from a V4L2Device to ensure it functions correctly. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-02-06test: v4l2_device: Use DeviceEnumerator to find a UVCVideoKieran Bingham
Utilise the existing DeviceEnumerator system to identify a suitable V4L2Device for testing. Specifically target these tests at a uvcvideo driver based device as a known supported target. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-01-24libcamera: device_enumerator: Reference-count MediaDevice instancesLaurent Pinchart
The MediaDevice class will be the entry point to hot-unplug, as it corresponds to the kernel devices that will report device removal events. The class will signal media device disconnection to pipeline handlers, which will clean up resources as a result. This can't be performed synchronously as references may exist to the related Camera objects in applications. The MediaDevice object thus needs to be reference-counted in order to support unplugging, as otherwise pipeline handlers would be required to drop all the references to the media device they have borrowed synchronously with the disconnection signal handler, which would be very error prone (if even possible at all in a sane way). Handle MedieDevice instances with std::shared_ptr<> to support this. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-01-23tests: event-dispatcher: Add processEvents() interruption testLaurent Pinchart
Test that the EventDispatcher::interrupt() function correctly interrupts the processEvents() function, both when called before processEvents() and when called while it is running. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-01-23tests: Test event dispatcher interruption by signalLaurent Pinchart
Add a test to verify that the event dispatcher correctly restarts event processing when interrupted by a signal. The test currently fails as this feature isn't implemented. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-01-22libcamera: Global s/devnode/deviceNode renameJacopo Mondi
Do not use the abreviated version for members, variables and getter methods. Library-wise rename, no intended functional changes. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-01-22test: pipeline: IPU3: Add IPU3 pipeline testJacopo Mondi
Add test for the Intel IPU3 pipeline that lists all the cameras registered in the system and verifies the result matches the expected. This test is meant to be run on IPU3 platforms, it gets skipped otherwise. Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-01-21libcamera: camera: Handle camera objects through shared pointersLaurent Pinchart
The Camera class is explicitly reference-counted to manage the lifetime of camera objects. Replace this open-coded implementation with usage of the std::shared_ptr<> class. This API change prevents pipeline handlers from subclassing the Camera class. This isn't deemed to be an issue. Mark the class final to make this explicit. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-01-21libcamera: camera_manager: Register cameras with the camera managerLaurent Pinchart
Cameras are listed through a double indirection, first iterating over all available pipeline handlers, and then listing the cameras they each support. To simplify the API make the pipeline handlers register the cameras with the camera manager directly, which lets the camera manager easily expose the list of all available cameras. The PipelineHandler API gets simplified as the handlers don't need to expose the list of cameras they have created. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-01-17test: v4l2_device: Add test suite and initial testKieran Bingham
Provide a base class to construct a v4l2_device object for further tests and an initial test which validates the FD handle can not be leaked. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-01-17test: timer: Add a 32 bit wraparound testKieran Bingham
Add a test which catches a timer running longer than the nanosecond resolution of 32 bits. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-01-17test: timer: Initialise all variablesKieran Bingham
The ManagedTimer does not initialise the integer 'interval_' variable. This is set before used, and should not break - but for completeness (and to cover static analysers) initialise the variable in the initialiser list. Fixes: 034ea868027d ("test: Add timer test") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-01-14test: media_device: Add link handling testJacopo Mondi
Add a test unit that exercise link handling on the VIMC media graph. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-01-14test: media_device: Make MediaDeviceTest a MediaDevicePrintTestJacopo Mondi
As a new class for test link handling will be added as a separate test, it makes no sense to have a generic "MediaDeviceTest" class. Rename it in "MediaDevicePrintTest", and make it run only printing test. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-01-14test: media_device: Convert to foreachKieran Bingham
Prevent duplication of boilerplate code as the suite grows by establishing the foreach pattern in the media_device test suite. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-01-08test: Add event notifier testLaurent Pinchart
The test covers read notification and notifier enable/disable. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-01-08test: Add timer testLaurent Pinchart
The test covers timer start, timeout, restart after completion, restart before completion and multiple timers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-01-08test: Add signal/slot testLaurent Pinchart
The test covers signal connection, disconnection through all the provided methods, emission, parameters, and connection of a signal to multiple slots. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-01-08test: Rename list test to list-camerasLaurent Pinchart
The list test generates a list binary in the test directory, which conflicts with the C++ std::list header of the same name. The binary gets included instead of the header file, breaking compilation. Rename the test to avoid this. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-01-08libcamera: camera_manager: Make the class a singletonLaurent Pinchart
There can only be a single camera manager instance in the application. Creating it as a singleton helps avoiding mistakes. It also allows the camera manager to be used as a storage of global data, such as the future event dispatcher. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-01-02test: Move include definitions to libtestKieran Bingham
With the libtest functionality moved to its own library folder, the definitions for test includes should reasonably live there too. The libtest subdir should always remain the first entry in the test/meson.build file. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-01-02test: Use foreach iterators to simplify definitionsKieran Bingham
Create two arrays, to contain public and internal test targets, and use the foreach iterators to automatically generate test output targets for each entry in each array. The public tests array is linked only against public libcamera headers, while tests declared in the internal_tests will have access to non-public API headers from within the libcamera sources. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-01-02test: media_device: Move test definitionKieran Bingham
The test definition for the media_device_test executable should be located with the exectuable definition. Move it to the meson.build of that test suite subdir. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-01-02libcamera: Remove libcamera classLaurent Pinchart
The class was just a placeholder, now that we have other objects defined, remove it along with the associated test. The libcamera/libcamera.h header is kept as a shortcut to include the whole libcamera public API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-01-01test: libtest: Return all non-zero init valuesKieran Bingham
A skipped test is currently defined as returning 77. If this is returned by the init stage, currently the execute call will continue on to the run stage. Correct this such that any non-zero return code from the init phase will abort the test. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-01-01test: libtest: Add test return codesKieran Bingham
The meson test infrastructure uses return codes to determine test results. Define these values for use in tests. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [Use an enum instead of macros for test return codes.] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-01-01test: Move test objects to libtestKieran Bingham
Create a subdirectory to contain the libtest helper library. Define two variables to clarify when tests are aimed at public or internal components. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>