summaryrefslogtreecommitdiff
path: root/test
AgeCommit message (Collapse)Author
2019-08-11tests: v4l2_videodevice: Set media bus and pixel formats for vimcNiklas Söderlund
Most of the video device tests are based on vimc and Linux commit 85ab1aa1fac17bcd ("media: vimc: deb: fix default sink bayer format") changes the default media bus format for the debayer subdevices. This leads to a -EPIPE error when trying to use the raw capture video device nodes. Fix this by explicitly setting media bus and pixel formats to known good values which works before and after the upstream change. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-08-11libcamera: pipeline: vimc: Switch to using the RGB/YUV Capture video nodeNiklas Söderlund
Linux commit 85ab1aa1fac17bcd ("media: vimc: deb: fix default sink bayer format") which is part of v5.2 changes the default media bus format for the debayer subdevices. This leads to a -EPIPE error when trying to use the raw capture video device nodes. Fix this by moving the vimc pipeline to use the RGB/YUV Capture capture video node. As a consequence of this change the scaler in the vimc pipeline is used and a hard coded upscale of 3 is present in the video pipeline. This limits the sizes exposed and accepted by libcamera to multiples of 3. Update the buffer import test case to match this new format constraint by setting the resolution to 1920x1080, a resolution which works with both vimc and vivid. With this new resolution the buffer import test takes a bit more time to complete 60 buffers and it's runtime also needs to be increased. The raw capture video node still needs to be handled by the pipeline as its format needs to be updated to allow the pipeline format validation to pass. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-08-01test: camera: buffer_import: clear video pointerKieran Bingham
The FrameSink::cleanup() call checks if video_ is set before cleaning up and then deleting the object. If the cleanup() call is called twice for any reason, this will encounter a use-after-free as the video_ pointer is not cleared after deletion. Whilst cleanup() is not currently called twice consecutively, to prevent errors in the future, make it explicit that the object has been deleted by clearing the stale pointer. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-07-17test: logging: move logging tests to a subdirectoryPaul Elder
Since there are two logging tests now, move them to their own subdirectory. Update meson as necessary. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-17test: logging: add logging process testPaul Elder
Add a test to test that logging works in isolated child processes. Only logSetFile is tested, because stdout and stderr are closed for isolated child processes, and syslog and the none logging destinations are expected to be the same as non-isolated processes. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-17test: logging: add logSetStream testPaul Elder
Test the new logSetStream logging API call. Reorganize the logging API tests at the same time. logSetTarget for the syslog logging destination is not tested. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-16libcamera: message: Add user message typesJacopo Mondi
Reserve identifiers for user-defined message types and add an operation to the Message class to register the type identifiers. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-07-14test: camera: Add buffer import and mapping testJacopo Mondi
Test buffer importing and mapping by streaming the VIMC camera to VIVID video output device performing zero-copy memory sharing using dmabuf file descriptors. The test cycle 20 buffers between the camera and the output with a 1:1 buffer index to dmabuf fd mapping, then randomises the mapping with the same number of buffers on each side for 20 more frames, to finally increase the number of buffers on the output side for the 20 last frames. No remapping of dmabuf fd to buffer index should occur for the first 40 frames. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: Stop using Stream::bufferPool to get the number of buffersLaurent Pinchart
The cam and qcam applications, as well as the camera capture test case, access the Stream::bufferPool in order to know how many requests to initially queue. As part of an effort to remove access to the buffer pool from applications, use the buffer count from the stream configuration instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: v4l2_videodevice: Signal buffer completion at streamoff timeLaurent Pinchart
When stopping the stream buffers have been queued, in which case their completion is never be notified to the user. This can lead to memory leaks. Fix it by notifying completion of all queued buffers with the status set to error. As a result the base PipelineHandler implementation can be simplified, as all requests complete as the result of stopping the stream. The stop() method that manually completes all queued requests isn't needed anymore. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: buffer: Split memory information to BufferMemoryLaurent Pinchart
The Buffer class is a large beast the stores information about the buffer memory, dynamic metadata related to the frame stored in the buffer, and buffer reference data (in the index). In order to implement buffer import we will need to extend this with dmabuf file descriptors, making usage of the class even more complex. Refactor the Buffer class by splitting the buffer memory information to a BufferMemory class, and repurposing the Buffer class to reference a buffer and to store dynamic metadata. The BufferMemory class becomes a long term storage, valid and stable from the time buffer memory is allocated to the time it is freed. The Buffer class, on the other hand, becomes transient, is created on demand when an application requires a buffer, is given to a request, and is deleted when the request completes. Buffer and BufferMemory don't need to be copied, so their copy constructor and assignment operators are deleted. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: v4l2_videodevice: Add helper to queue all buffersLaurent Pinchart
When starting the stream on a capture video device it is often needed to queue all the allocated buffers. Add a helper method to do so, and refactor the existing queueBuffer() method to make it clearer. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-13test: v4l2_videodevice: buffer_sharing: Lower resolution to speed up testLaurent Pinchart
Lower the resolution to the smallest vivid supports, 320x180, in order to speed up the test. This isn't enough in itself as the frame rate also has to be configured, but the V4L2VideoDevice class doesn't support frame rate control yet. In the meantime the frame rate can be set manually with yavta or v4l2-ctl. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2019-07-12test: logging: fix compilation on Chromium OSPaul Elder
Commit a25c937f8afe ("test: add logging API test") causes the build to fail in the Chromium OS build environment, because the return value of a function call marked with the __warn_unused_result__ attribute is ignored. Fix this. Fixes: a25c937f8afe ("test: add logging API test") Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-12libcamera: add IPA proxyPaul Elder
Add an IPAProxy class whose implementations will act as a proxy between a pipeline handler and an isolated IPA interface. Also add an IPAProxyFactory that will construct the IPAProxy implementations as necessary. Update Doxygen to ignore the directory where IPAProxy implementations will reside. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-12libcamera: Add Process and ProcessManager classesPaul Elder
Add a Process class to abstract a process, and a ProcessManager singleton to monitor and manage the processes. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-12libcamera: ipa_module_info: add license fieldPaul Elder
Add a field to IPAModuleInfo to contain the license of the module. This license field will be used to determine whether the IPA module should be run in an isolated process or not. If the license is open source, then the IPA module will be allowed to run without process isolation, if the user enables it. If the license is not open source, then the IPA module will be run with process isolation. Update the dummy IPA and IPA test to conform to the new struct layout. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-12test: add logging API testPaul Elder
Test that setting the log file and log levels works from an application point of view. The test uses the internal logging mechanism as well, just to write to the log file. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-11test: signal: Extend Signal test with multi-inheritance reeiverLaurent Pinchart
Add tests that exercises the Object-related signal code paths (in particular automatic disconnection on Signal deletion) when the receiver inherits from multiple base classes, with Object being the second base. This tests the casts to and from Object * in the signal implementation. The new tests segfault due bugs in the signal/slot implementation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-11test: Add test case for signal delivery across threadsLaurent Pinchart
The test case creates a receiver inheriting from Object, connects a signal to one of its slot, moves the receiver to a different thread, emits the signal and verifies that it gets delivered in the correct thread with the expected value. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-11test: Add Message test caseLaurent Pinchart
The Message class test creates a receiver inheriting from Object, moves it to a different thread, sends a message to the receiver and verifies that the message is delivered in the correct thread. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-11test: Add Thread test casesLaurent Pinchart
The Thread test case verifies that - a Thread instance is created for the main thread - a new Thread can be created, started, and stopped Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-04test: Allow self-contained tests to run in parallelNiklas Söderlund
The IPA, IPC and Stream tests are self-contained so they can run in parallel. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-02libcamera: test: Add ControlList testsKieran Bingham
Add tests of the ControlList infrastructure and public API. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-02libcamera: test: Add ControlInfo testKieran Bingham
Provide an initial test coverage for the ControlInfo class. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-02libcamera: test: Add ControlValue testKieran Bingham
Add initial basic testing for the new ControlValue class. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-02test: ipc: unix: Add test for IPCUnixSocketNiklas Söderlund
Test that the IPC supports sending data and file descriptors over the IPC medium. To be able to execute the test two parts are needed, one to drive the test and act as the libcamera (master) and a one to act as the IPA (slave). The master drives the testing posting requests to the slave to process and sometimes respond to. A few different tests are performed. - Master sends an array to the slave which responds with a reversed copy of the array. The master verifies that a reversed array is returned. - Master tries to send an empty message making sure that the send call fails. - Master sends a list of file descriptors and ask the slave to calculate and respond with the sum of the size of the files. The master verifies that the calculated size is correct. - Master sends a pre-computed size and a list of file descriptors and asks the slave to verify that the pre-computed size matches the sum of the size of the file descriptors. - Master sends two file descriptors and asks the slave to join the file contents in a new file and respond with its file descriptor. The master then verifies that the content of the returned file descriptor matches the order of the original two files. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-01test: timer: Add dynamically allocated timer testLaurent Pinchart
Timers should be automatically stopped and unregistered when deleted. Add a test to verify this is the case. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-06-19libcamera: Rename V4L2Device to V4L2VideoDeviceJacopo Mondi
In preparation of creating a new V4L2Device base class, rename V4L2Device to V4L2VideoDevice. This is a project wide rename without any intended functional change. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-19test: stream: Add test for StreamFormatNiklas Söderlund
Test that both discrete and range based stream format descriptions result in good discrete frame sizes. The range based stream formats needs to be fitted with a table of resolutions inside libcamera so if that table is updated this test might need to be updated. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-19libcamera: v4l2_subdevice: Replace FormatEnum with ImageFormatsNiklas Söderlund
Replace all usage of FormatEnum with ImageFormats and completely remove FormatEnum which is no longer needed. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-12tests: Add CameraSensor class testLaurent Pinchart
Add a test to verify media bus codes, sizes and resolution retrieval through the CameraSensor API based on the Sensor A in the vimc pipeline. Also check that the getFormat() method returns the expected media bus code and size. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-06-11test: camera: Increase runtime for capture testNiklas Söderlund
Upstream commit 2978a505aaa981b2 ("media: vimc: stream: fix thread state before sleep") changes the frame rate when capturing from the vimc raw capture video nodes. The commit changes the frame rate from thousands of frames per second to to roughly fifty. The libcamera capture test was written with the assumption that vimc would keep providing this fast frame rate and ran for a very short time to decrease the overall run time of tests. This is no longer possible and the test fails as it can't capture enough frames in its runtime, increase the runtime to match the new vimc frame rate. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-10test: camera: Fix initialisationKieran Bingham
Three tests {capture,configuration_set,statemachine} override the CameraTest::init() function, and call it as the first action. However they were not checking the return value, and each of the tests will segfault if the VIMC camera is not obtained. Check the return value of the CameraTest base class initialisation and return any errors to the test suite if initialisation fails. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-06-05libcamera: test: remove test IPA and use dummy IPA insteadPaul Elder
Use the dummy IPA for testing/sample IPA instead of the earlier test IPA. Remove the test IPA, and update tests and meson accordingly. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-05libcamera: ipa_manager: implement class for managing IPA modulesPaul Elder
IPAManager is a class that will search in given directories for IPA modules, and will load them into a list. It also provides an interface for pipeline handlers to acquire an IPA. A meson build file for the IPAs is added, which also specifies a hard-coded path for where to load the IPAs from in the installation directory. More paths can be specified with the environment variable LIBCAMERA_IPA_MODULE_PATH, with the same syntax as the regular PATH environment variable. Make the test framework set this environment variable. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-05libcamera: ipa_module_info: update struct to allow IPA matchingPaul Elder
We need a way to match pipelines with IPA modules, so add fields in IPAModuleInfo to hold the IPA module API version number, the pipeline name, and the pipeline version. The module API version is used to determine the layout of struct IPAModuleInfo. Also update IPA module tests and Doxygen accordingly. Doxygen needs to be updated to accomodate __attribute__((packed)). Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-05libcamera: ipa_interface: add headerPaul Elder
Define an IPAInterface class which will contain an IPA implementation. The methods that the IPAInterface exposes form the interface to the IPA implementation, hence the name. IPA module shared objects will implement this class. This also means that IPA module shared objects must be implemented in C++, so remove the C test IPA module. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-05-25tests: list_formats: Fix argument names and add constNiklas Söderlund
Argument name differs from definition and implementation, fix it by renaming the definition. While at it make the argument const. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-05-23meson: Create and use a dependency for libcamera and its headersLaurent Pinchart
Instead of manually adding the libcamera library and include path to every target that requires it, declare a dependency that groups the headers as source, the library and the include path, and use it through the project. This simplifies handling of the dependency. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-05-23meson: Fix coding style in meson.build filesLaurent Pinchart
Consistently go for 4 spaces indentation, and always put a space between the colon in argument lists, as per the examples from the meson documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-05-23libcamera: camera: Add a validation API to the CameraConfiguration classLaurent Pinchart
The CameraConfiguration class implements a simple storage of StreamConfiguration with internal validation limited to verifying that the stream configurations are not empty. Extend this mechanism by implementing a smart validate() method backed by pipeline handlers. This new mechanism changes the semantic of the camera configuration. The Camera::generateConfiguration() operation still generates a default configuration based on roles, but now also supports generating empty configurations to be filled by applications. Applications can inspect the configuration, optionally modify it, and validate it. The validation implements "try" semantics and adjusts invalid configurations instead of rejecting them completely. Applications then decide whether to accept the modified configuration, or try again with a different set of parameters. Once the configuration is valid, it is passed to Camera::configure(), and pipeline handlers are guaranteed that the configuration they receive is valid. A reference to the Camera may need to be stored in the CameraConfiguration derived classes in order to access it from their validate() implementation. This must be stored as a std::shared_ptr<> as the CameraConfiguration instances belong to applications. In order to make this possible, make the Camera class inherit from std::shared_from_this<>. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-05-23libcamera: camera: Return a pointer from generateConfiguration()Laurent Pinchart
To prepare for specialising the CameraConfiguration class in pipeline handlers, return a pointer to a camera configuration instead of a reference from Camera::generateConfiguration(). The camera configuration always needs to be allocated from the pipeline handler, and its ownership is passed to the application. For symmetry, change Camera::configure() to take a CameraConfiguration pointer instead of a reference. This aligns with our coding practice of passing parameters that are modified by the callee by pointer. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-05-23libcamera: Refactor the camera configuration storage and APILaurent Pinchart
Refactor the CameraConfiguration structure to not rely on Stream instances. This is a step towards making the camera configuration object more powerful with configuration validation using "try" semantics. The CameraConfiguration now exposes a simple vector-like API to access the contained stream configurations. Both operator[]() and at() are provided to access elements. The isEmpty() method is renamed to empty() and the methods reordered to match the std::vector class. As applications need access to the Stream instances associated with the configuration entries in order to associate buffers with streams when creating requests, expose the stream selected by the pipeline handler through a new StreamConfiguration::stream(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-05-23libcamera: Use stream roles directly instead of StreamUsageLaurent Pinchart
In order to prepare for an API overhall of the camera configuration generation, remove the StreamUsage class and replace its uses by stream roles. The size hints can't be specified anymore, and will be replaced with an API on the StreamConfiguration to negotiate configuration parameters with cameras. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-05-23libcamera: camera: Rename configureStreams() and streamConfiguration()Laurent Pinchart
Rename the configureStreams() and streamConfiguration() methods to configure() and generateConfiguration() respectively in order to clarify the API. Both methods deal with CameraConfiguration objects, and are thus not limited to streams, even if a CameraConfiguration currently contains streams only. While at it, remove the qcam MainWindow::configureStreams() method that is declared but never defined or used. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-05-21test: ipa: add IPAModule testsPaul Elder
Add tests to test the the IPAModule class, for loading the IPA module info from IPA module .so shared objects, with modules written in both C and C++. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-05-17test: v4l2_device: Switch most tests to vimcNiklas Söderlund
The vimc driver delivers frames much faster then the vivid driver hence most v4l2 device tests complete much quicker if vimc is used. The only v4l2 device test which can't be switched is buffer_sharing as it needs to import buffers somewhere, something vimc do not support. With this change I manage to shave of almost 7 seconds for each run of all v4l2 device tests. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-05-17test: v4l2_device: Reset media links and set a resolutionNiklas Söderlund
When initializing the test reset any media links and set a know resolutions. This is needed to put the device under test into known state and not have the v4l2 device tests depend on that no one have touched the device before the test is executed. The resolution is picked purely at random and could possibly be moved to each test case if there is a need for different resolutions for a specific one. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-05-17test: v4l2_device: Allow each test to specify which device and entity to testNiklas Söderlund
Prepare for different tests which implements V4L2DeviceTest to specify which media device and entity they wish to test. There is no functional changes, all tests still use vivid to perform there tests. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>