| Age | Commit message (Collapse) | Author |
|---|
|
The documentation for the blackLevel_ member is very terse. Reference
the more complete documentation of the sibling blackLevel() member
function to provide more information.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Spaces at end of lines have cropped up in a few places in libcamera.
Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the configuration file for an IPA module is missing, it is reported
as an error in the log, for example:
ERROR IPAProxy ipa_proxy.cpp:149 Configuration file 'imx219.yaml' not found for IPA module 'simple'
This is misleading because several pipelines use uncalibrated.yaml in
such a case and can continue working. And in case of software ISP,
there is currently no other configuration file so the error is always
reported.
On the other hand, in some other cases the presence of the configuration
file is required and it is an error if it is missing.
Let's introduce a new optional argument to IPAProxy::configurationFile
that specifies a fallback file if the requested file is not found. If
the primary requested file is not found and a non-empty fallback file is
specified then a warning is logged and the fallback file is looked up.
If neither the fallback file can be found then only then an error is
logged and the method returns an empty string. This change has also the
benefit of putting the common fallback file ("uncalibrated.yaml")
pattern to a single place.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
SimplePipelineHandler::match may be called several times for different
pipeline configurations. Not all of these calls must succeed. For
example, for TI AM69 board with a single camera attached, the following
error is reported in the log even when libcamera works fine:
ERROR SimplePipeline simple.cpp:1558 No sensor found
This is because a sensor is found for /dev/media0 but not for
/dev/media1. The error is harmless in such a case and only confuses
users who may think no camera is detected at all. Let's change the
error to info and add the device node to the message to indicate the
error is specific to the given media only. It's up to the callers to
report a fatal error condition if libcamera cannot work due to no
matching pipeline configuration.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The file seal TODO item has been addressed. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Milan Zamazal <mzamazal@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
The memfd underlying the SharedMem object must not shrink, or memory
corruption will happen. Prevent this by setting the shrink seal on the
file. As there's no valid use case for growing the memory either, set
the grow seal as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Milan Zamazal <mzamazal@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
uClibc doesn't provide memfd_create(), which led libcamera to open-code
the call using syscall(). Sprinkling the code with #ifdef's isn't the
most readable option, so improve it by providing a local implementation
of memfd_create(), and call the function unconditionally from
MemFd::create(). This makes the main code path more readable.
Suggested-by: Nicolas Dufresne <nicolas@ndufresne.ca>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Milan Zamazal <mzamazal@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
|
|
libcamera creates memfds in two locations already, duplicating some
code. Move the code to a new MemFd helper class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Milan Zamazal <mzamazal@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Unlike in C where they have been standardized since C99, variable-length
arrays in C++ are an extension supported by gcc and clang. Clang started
warning about this with -Wall in version 18:
src/libcamera/ipc_unixsocket.cpp:250:11: error: variable length arrays in C++ are a Clang extension [-Werror,-Wvla-cxx-extension]
250 | char buf[CMSG_SPACE(num * sizeof(uint32_t))];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
One simple option is to disable the warning. However, usage of VLAs in
C++ is discouraged by some, usually due to security reasons, based on
the rationale that developers are often unaware of unintentional use of
VLAs and how they may affect the security of the code when the array
size is not properly validated.
This rationale may sound dubious, as the most commonly proposed fix is
to replace VLAs with vectors (or just arrays dynamically allocated with
new() wrapped in unique pointers), without adding any size validation.
This will not produce much better results. However, keeping the VLA
warning and converting the code to dynamic allocation may still be
slightly better, as it can prompt developers to notice VLAs and check if
size validation is required.
For these reasons, convert all VLAs to std::vector. Most of the VLAs
don't need extra size validation, as the size is bound through different
constraints (e.g. image width for line buffers). An arguable exception
may be the buffers in IPCUnixSocket::sendData() and
IPCUnixSocket::recvData() as the number of fds is not bound-checked
locally, but we will run out of file descriptors before we could
overflow the buffer size calculation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The Qt 6 qkeysequence.h header has an extra semicolon. This causes a
build failure with clang:
/usr/include/qt6/QtGui/qkeysequence.h:139:26: error: extra ';' after member function definition [-Werror,-Wextra-semi]
139 | Q_ENUM(SequenceMatch);
| ^
We can't fix the issue, so ignore the warning in qcam.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
This changes is fixing critical error message
"gst_value_set_int_range_step: assertion 'start < end' failed" observed
when building GStreamer caps from a stream configuration whose size
range holds a single size.
GStreamer range step definition requires distinct min and max values
definitions, otherwise above error message is output.
libcamera SizeRange instance may return a single size leading to
identical min and max values. Add a conditional check where the min and
max of the range are distinct during iterating the supported sizes for
each pixelformat.
To prevent appending structures that are already expressed with this
update, gst_caps_merge_structure() is used in place of
gst_caps_append_structure().
Signed-off-by: Hou Qi <qi.hou@nxp.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The child proxy interface is needed in order to allow setting
properties on pad using parse launch syntax.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide the onsemi AR0144 camera sensor properties and registration with
libipa for the gain code helpers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The musl C library, as well as the POSIX standard, define the ioctl()
function's request argument as an int. glibc and uclibc, on the other
hand, define it as an unsigned long.
This difference between the function prototype and the implementation in
the V4L2 adaptation layer causes a compilation error with musl. Fix it
by detecting the function prototype and declaring the libcamera ioctl()
handler accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Without the camera manager, it is not possible to cleanly delete the
FrameBufferAllocator object. Keep the camera manager alive until all the
memory object have been released.
A shared_ptr to the CameraManager is introduced which is itself stored
as a plain pointer and allocated and released explicitly. When more
than one C++ member is required, this can be refactored to use a new C++
class, but the struct _GstLibcameraAllocator is allocated and freed by
glib, so it does not have automatic destruction presently.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=211
[Kieran: Update test framework to remove expected test fail]
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The GstAtomicQueue only supports 2 threads, one pushing, and one
popping. We pop and push on error cases and we may have multiple threads
downstream returning buffer (using tee), which breaks this assumption.
On top of which, the release function, that notifies when the queue goes
from empty to not-empty relies on a racy empty check. The downstream
thread that does this check is effectively concurrent with our thread
calling acquire().
Fix this by replacing the GstAtomicQueue with a std::deque, and protect
access to that using the object lock.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=201
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the colour temperature does not change between frames, the ccm
inside the frame context is not updated and the metadata contains
invalid data. Fix that by caching the ccm inside the active state.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
[Kieran: Remove spurious [[maybe_unused]] addition]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Only the first three entries of the matrix were set. Fix that.
Fixes: cbfdfa42cacc ("ipa: rkisp1: algorithms: Add crosstalk algorithm")
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the colour temperature estimation gets skipped, the metadata isn't
populated. Fix that by filling the metadata early in the function.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The frame context is used to store data used for processing that frame.
It is later used to either act as input for other algorithms or to fill
the metadata. For the colour temperature this is not needed, as the
meatadata shall not contain the value that was active when the image was
processed, but the value that was calculated based on the statistics for
that image. This is no functional change.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the color gains are set manually it is possible to specify a
gain that wrapped the hardware limits. It would also be possible to
further tune the floating point limits, but that is an error prone
approach. So the limits are imposed on the integers, just before writing
to the hardware. This noticeably reduces some oscillations in the awb
regulation.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add black level value for OV5675 camera sensor.
According to datasheet, default value is 0x10, 10 bits width.
However, Linux kernel driver initializes black level target value
to 0x40. Set the value to the same as in kernel driver, but scaled
to 16 bits.
Signed-off-by: Daniel Semkowicz <dse@thaumatec.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Open source Qt 5 has been effectively end of life since the release
of Qt 6, and Qt 6 has current LTS releases now.
This change ports qcam to Qt 6.2 and drops some of the baggage related
to Qt 5 that is no longer applicable.
Signed-off-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The j721e-csi2rx driver pipeline uses no converters, so enable the
software ISP plugin support. This is handy for boards with AM62 SoC
(like BeaglePlay) that have no HW ISP.
Tested with IMX519 on SK-AM62 running a kernel built with dmabuf heap
support.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
V4L2VideoDevice is using the caps to determine which kind of buffers to
use with the video-device in 2 different cases:
1. V4L2VideoDevice::open()
2. V4L2VideoDevice::[get|try|set]Format()
And the order in which the caps are checked is different between
these 2 cases. This is a problem for /dev/video# nodes which support
both video-capture and metadata buffers. open() sets bufferType_ to
V4L2_BUF_TYPE_VIDEO_CAPTURE[_MPLANE] in this case, where as
[get|try|set]Format() will call [get|set]FormatMeta() which does not
work with V4L2_BUF_TYPE_VIDEO_CAPTURE[_MPLANE] buffers.
Switch [get|try|set]Format() to use the bufferType_ to determine on what
sort of buffers they should be operating, leaving the V4L2VideoDevice
code with only a single place where the decision is made what sort
of buffers it should operate on for a specific /dev/video# node.
This will also allow to modify open() in the future to take a bufferType
argument to allow overriding the default bufferType it selects for
/dev/video# nodes which are capable of supporting more then 1 buffer type.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Keep the image aspect ratio when displaying in the viewfinder.
When the window is adjusted to a size that differs in aspect ratio to
the image, keep the image centered in the main window.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We have all these neat tuning files. Unfortunately we forgot to install
many of them.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The context parameter of the BlackLevelCorrection::init() function is
used. Drop the [[maybe_unused]] attribute.
Fixes: 50c28e135100 ("ipa: rkisp1: blc: Query black levels from camera sensor helper")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Enable the simple pipeline handler with software ISP for the IPU6 now
that the IPU6 CSI2 receiver (aka the isys driver) has landed in
media_staging/master.
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Move black levels for tuning files that contained a BLC block into
the camera sensor helpers.
ov4689.yaml had 66@12bit while the datasheet states 64@12bit. Use the
value from the datasheet (scaled to 16bit).
ov5640.yaml had 256@12bit while the datasheet states 16@10bit. Looking
at the commit message the 256 most likely stems from the imx219 tuning
file and 16@10bit is the same as the 64@12bit from the ov4689. This
seems more likely and is therefore used.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The black levels for imx219 and imx258 are now contained in the camera
sensor helpers. Remove them from the tuning file for the imx219. Add a
BLC entry to the imx258 tuning file.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add sensor black levels to the metadata of the rkisp1 pipeline.
Additionally enable raw support for this algorithm and add it to
uncalibrated.yaml, so that black levels get reported when capturing
tuning images. This is a bit of a hack, because no actual black level
correction is taking place in raw mode, but it is the easiest way to get
blacklevel reported for raw streams.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As the camera sensor helper now has the ability to provide the black
level, use it. Black levels can still be overwritten by the tuning
file, but the direction is to remove them from the tuning files and move
them into the sensor helpers.
Additionally interpret all values based on 16bits. The conversion to the
scale required by the hardware is done in process(). It ensures all the
values inside libcamera are the same scale and is in preparation for the
i.MX8MP where black levels are based on a 20bit scale. Note that this
breaks existing tuning files. The tuning files distributed with
libcamera will be fixed in a later patch.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
To be able to query the black levels, the black level correction
algorithm needs access to the camera sensor helper. Allow this by moving
the camHelper_ member from IPARkISP1 into IPAContext.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
For a proper tuning process we need to know the sensor black levels. In
most cases these are fixed and not reported by the kernel driver. Store
them inside the sensor helpers for later retrieval by the algorithms.
Add black level value corresponding to the data pedestal for three
initial sensors as documented in the datasheets. More should be added,
eventually filling the gaps for all supported sensors.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The converter interface uses the unsigned int output stream index to map
to the output frame buffers. This is cumbersome to implement new
converters because one has to keep around additional book keeping
to track the streams with their correct indexes.
The v4l2_converter_m2m and simple pipeline handler are adapted to
use the new interface. This work roped in software ISP as well,
which also seems to use indexes (although it doesn't implement converter
interface) because of a common conversionQueue_ queue used for
converter_ and swIsp_.
The logPrefix is no longer able to generate an index from a stream, and
is updated to be more expressive by reporting the stream configuration
instead, for example, reporting "1920x1080-MJPEG" in place of
"stream0".
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com> # sm8250 RB5
|
|
Rename the private Stream class from V4L2M2MConverter::Stream to
V4L2M2MConverter::V4L2M2MStream. This is done to improve readability
of the code when we drop the handling of stream by indexes in a
subsequent patch.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Currently the soft-isp outputs a single output stream. Hence,
drop the unnecessary check for stream indexes.
Another reason to drop is actually the stream indexes is meant to be
unique in outputs std::map<>, hence checking for unique stream indexes
is redundant.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The streams sanity check tries to determine if all the stream indexes
passed in outputs std::map<> are unique. However, since the data
container is std::map<>, all its keys (stream indexes in this case),
are already unique.
Instead, rectify the sanity check to ensure all the framebuffers passed
in the outputs std::map<> are unique to each index. Hence, no two stream
indexes should have same framebuffer. Update the comment to reflect
the change.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The 16-bit padded raw 10 and raw 12 formats are stored in memory in
little endian order, regardless of the machine's endianness. Read pixel
data as uint8_t values and hardcode bit shifting to little endian to fix
scanline packing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
The 16-bit padded raw 10 and raw 12 formats are stored in memory in
little endian order, regardless of the machine's endianness. Swap the
16-bit values on big-endian machines when reading pixels from memory to
generate thumbnails.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
Add support for RAW10 and RAW12 to the dng_writer. This is needed on
imx8mp to produce tuning images. Both formats were tested on a debix
som with a imx335.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a thumbnail function for raw formats that are 16bit aligned.
This is needed for the upcoming RAW10 and RAW12 implemntation.
Use the new function for RAW16 as the thumbScanlineRaw_CSI2P produces
incorrect results for that format (it averages over adjacent bytes,
which works for the CSI formats).
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The old names lead to confusions. Rename to better express the intent.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add support for RAW16 formats to the DNGWriter helpers so that we can
produce dng files from the mali-c55.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The gcc used in my current buildroot (Version 12.3) errors out with
-Wmaybe-uninitialized. Fix that.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
In libtiff version 4.5.1 and later the CFA* tags were missing. This got
fixed in https://gitlab.com/libtiff/libtiff/-/commit/49856998c3d82e65444b47bb4fb11b7830a0c2be
Unfortunately the fix is not released yet, but the faulty libtiff is
contained in current buildroot. As a local fix is pretty easy and
without side effects, let's workaround that.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Multiple local functions are defined in the global namespace without the
static keyword. This compiles fine for now, but will cause a missing
declaration warning when we enable them. To prepare for that, move the
function declaration to an anonymous namespace.
While at it, for consistency, include an existing static function in the
namespace and drop the static keyword.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
_FORTIFY_SOURCE redirects the open*() calls to __open*_2() functions.
The libcamera V4L2 adaptation layer intercepts those functions to
support applications compiled with _FORTIFY_SOURCE. When _FORTIFY_SOURCE
is not enabled, the C library headers will not provide declarations for
the fortified functions, which will cause missing declaration warnings
when we unable them.
Fix this by disabling the -Wmissing-declarations warnings selectively
for the _FORTIFY_SOURCE functions. To avoid sparkling pragmas around,
move the relevant function definitions next to each other.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The close() and ioctl() functions are declared in the unistd.h and
sys/ioctl.h headers. Include them to provide the declarations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
