| Age | Commit message (Collapse) | Author |
|---|
|
Since commit bedef55d9500 ("libcamera: pub_key: Gracefully handle failures
to load public key") the build will fail if openssl is not found on the
host system.
Use the existing HAVE_IPA_PUBKEY define to avoid accessing pubKey_ which
does not exist when building without openssl.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Vimc pipeline handler is enabled unconditionally if the meson config
option '-Dtest' is true. However, this is not true for the vimc IPA.
Hence, a meson configuration such as:
-Dpipelines=raspberrypi -Dipas=raspberrypi -Dtest=true
will include the vimc pipeline handler (in addition to raspberrypi)
but will skip the vimc IPA which can lead to failure of unit tests
that depends on vimc to execute.
One such unit test was identified as a result of this issue on
RaspberryPi:
ERROR IPAModule ipa_module.cpp:278 ipa_vimc.so: Failed to open IPA library: No such file or directory
test IPA module src/ipa/vimc/ipa_vimc.so is invalid
due to the non-existent ipa_vimc.so.
Fix this by including the vimc IPA unconditionally when the tests are
enabled, similar to how the vim pipeline-handler is included.
Fixes: 6e65d4225736 ("libcamera: Enable vimc pipeline handler when tests are enabled")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
GST_VIDEO_TRANSFER_BT601 and GST_VIDEO_TRANSFER_BT2020_10 macros are
defined in GST Version 1.18.0.
Usage of these macros causes gstlibcamera compilation failure if
GST_VERSION < 1.18.0. These macros are used only if GST_VERSION >= 1.18.0.
Fix the following compilation error:
../src/gstreamer/gstlibcamera-utils.cpp:157:7: error: ‘GST_VIDEO_TRANSFER_BT601’ was not declared in this scope; did you mean ‘GST_VIDEO_TRANSFER_BT709’?
157 | case GST_VIDEO_TRANSFER_BT601:
| ^~~~~~~~~~~~~~~~~~~~~~~~
| GST_VIDEO_TRANSFER_BT709
../src/gstreamer/gstlibcamera-utils.cpp:159:7: error: ‘GST_VIDEO_TRANSFER_BT2020_10’ was not declared in this scope; did you mean ‘GST_VIDEO_TRANSFER_BT2020_12’?
159 | case GST_VIDEO_TRANSFER_BT2020_10:
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
| GST_VIDEO_TRANSFER_BT2020_12
Fixes: fc9783acc608 ("gstreamer: Provide colorimetry <> ColorSpace mappings")
Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Rishikesh Donadkar <rishikeshdonadkar@gmail.com>
Reviewed-by: Rishikesh Donadkar <rishikeshdonadkar@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The min/max/def ControlValue of a ControlInfo can take arbitrary types that
are different from each other and different from the ControlId type.
The serialiser serialises these ControlValue separately by their type but
does not store the type. The deserialiser assumes that ControlValue types
match the ControlId type. If this is not the case, deserialisation will try
to deserialise values of the wrong type.
Fix this by serialising each of the min/max/def ControlValue's ControlType
and storing it just before the serialised ControlValue.
Fixes: https://bugs.libcamera.org/show_bug.cgi?id=137
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Commit e297673e7686 ("libcamera: v4l2_device: Adjust colorspace based on
pixel format") has introduced a warning when trying to convert a color
space from V4L2 to libcamera if the media bus code is unknown. This was
meant to catch unknown image formats, but turned out to be also
triggered for metadata formats.
Color spaces are not applicable to metadata formats, there should thus
be no warning. Fix it by skipping the color space translation and
returning std::nullopt directly if the kernel reports
V4L2_COLORSPACE_DEFAULT. This doesn't introduce any change in behaviour
other than getting rid of the warning, as the V4L2Device::toColorSpace()
function returns std::nullopt already in that case.
Fixes: e297673e7686 ("libcamera: v4l2_device: Adjust colorspace based on pixel format")
Reported-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
When switching to different camera we try to release the camera
previously used. But if that camera has been unplugged, then its
instance would have been destroyed. Accessing it leads to seg fault.
Fix by checking camera_ to see if it exists.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=147
Signed-off-by: Utkarsh Tiwari <utkarsh02t@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
A UVC device could expose only formats that are not supported by
libcamera. The pipeline handler doesn't currently consider this as an
error, and happily creates a camera. The camera won't be usable, and
worse, generateConfiguration() and validate() will crash as those
functions assume that at least one format is supported.
Fix this by failing match() if none of the formats exposed by the camera
are supported. Log an error message in that case to notify the user.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=145
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Christian Rauch <Rauch.Christian@gmx.de>
|
|
Populate and cache the list of supported formats in
UVCCameraData::init(), to avoid repeating the operation every time
generateConfiguration() is called. Combine this with the search for
the largest size advertised by the camera to avoid iterating over the
formats twice in init().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Christian Rauch <Rauch.Christian@gmx.de>
|
|
Move the camera ID generation to UVCCameraData, and cache the ID in that
class. This will be useful to access the ID in multiple locations, such
as when printing error messages.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Christian Rauch <Rauch.Christian@gmx.de>
|
|
When the V4L2Device fails to open, it is not clear what device
caused the failure. The Entity name is presented, but not the device
node.
Provide it.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
If the CameraSensor fails to identify the VCM specified, it could still
be possible to continue to operate the sensor. Autofocus support will be
disabled, but this would be no different to operating a camera with a
fixed focus. While of course the fixed focus position may not be
suitable, it would provide a better user experience to be able to
continue to operate the camera, while still reporting that the lens is
disabled.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=146
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
It can be helpful to know 'which' file failed to parse if there is a
failure.
Report it to the user in the error message.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Overriding the dependency enables libcamera to be used
as a meson subproject more easily.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit 251f0534b74b ("qcam: viewfinder_gl: Take color space into account
for YUV rendering") introduced maybe-uninitialized warnings with gcc 11
and 12 when compiling with -O3. Both compilers warn that
../../src/qcam/viewfinder_gl.cpp: In member function ‘void ViewFinderGL::selectColorSpace(const libcamera::ColorSpace&)’:
../../src/qcam/viewfinder_gl.cpp:392:21: error: ‘offset’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
391 | fragmentShaderDefines_.append(QString("#define YUV2RGB_Y_OFFSET %1")
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
392 | .arg(offset, 0, 'f', 1));
| ~~~~^~~~~~~~~~~~~~~~~~~
Additionally, gcc 12 warns that
../../src/qcam/viewfinder_gl.cpp: In member function ‘void ViewFinderGL::selectColorSpace(const libcamera::ColorSpace&)’:
../../src/qcam/viewfinder_gl.cpp:379:36: error: ‘yuv2rgb’ may be used uninitialized [-Werror=maybe-uninitialized]
379 | yuv2rgb[i] *= 255.0 / 219.0;
../../src/qcam/viewfinder_gl.cpp:330:31: note: ‘yuv2rgb’ declared here
330 | std::array<double, 9> yuv2rgb;
|
While this should never happen here, the compiler isn't necessarily
wrong, as C++17 allows initializing a scoped enum from an integer using
direct-list-initialization, even if the integer value doesn't match any
of the enumerators for the scoped enum ([1]). Whether this is valid or
borderline paranoia from gcc may be debatable, but in any case it can't
be classified as blatantly wrong. Fix the warnings by adding default
cases to the switch statements in ViewFinderGL::selectColorSpace().
Which case is selected as the default doesn't matter, as this is not
meant to happen.
[1] https://en.cppreference.com/w/cpp/language/enum#enum_relaxed_init_cpp17
Bug: https://bugs.libcamera.org/show_bug.cgi?id=143
Fixes: 251f0534b74b ("qcam: viewfinder_gl: Take color space into account for YUV rendering")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Rewrote commit message, added a default case for the encoding switch.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The ycbcrEncodingToV4l2 map is missing the YCbCrEncoding::None encoding,
which results in a failure of V4L2Device::fromColorSpace() to convert
color spaces from libcamera to V4L2 for RGB formats. Fix it by adding
the missing encoding. As V4L2 has no such encoding, use
V4L2_YCBCR_ENC_DEFAULT as the value doesn't matter.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Currently to request a frame, we operate the camera directly.
This approach is also scattered in two places,
MainWindow::startCapture() and MainWindow::queueRequest().
This makes it difficult to account for requests.
Centralize all the queuing to a single function queueRequest()
Rename the current queueRequest() to renderComplete().
This makes more sense as this slot is triggered when
the render is complete and we want to queue another
request.
Signed-off-by: Utkarsh Tiwari <utkarsh02t@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The camera selection dialog currently only displays the camera Id.
Display the camera location and camera model if available.
Signed-off-by: Utkarsh Tiwari <utkarsh02t@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Replace the cameraCombo_ on the toolbar with a QPushButton which
displays the CameraSelectorDialog. This would allow the user to view
information about the camera when switching.
The QPushButton text is set to the camera Id currently in use.
Signed-off-by: Utkarsh Tiwari <utkarsh02t@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Currently if there is HotPlug event when the user is on the Camera
selection dialog, the QComboBox doesn't update to reflect the change.
Add support for hotplugging / unplugging cameras.
Signed-off-by: Utkarsh Tiwari <utkarsh02t@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Currently we use QInputDialog convenience dialogs to allow the user to
select a camera. This doesn't allow adding of more information (such as
camera location, model etc).
Create a QDialog with a QFormLayout that shows a QComboBox with camera
Ids. Use a QDialogButtonBox to provide buttons for accepting and
cancelling the action.
The CameraSelectorDialog is only initialized the first time when the
MainWindow is created.
From this commit we cease to auto select the camera if only a single
camera is available to libcamera. We would always display the selection
dialog with the exception being that being if the camera is supplied on
the command line.
Signed-off-by: Utkarsh Tiwari <utkarsh02t@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
parseFrames() return value was ignored. If there was an error during
frame parsing, parsing was not stopped correctly.
Signed-off-by: Daniel Semkowicz <dse@thaumatec.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
This change is required for AfWindows control from capture script.
Parser expects array of arrays of parameters, so it is possible to
specify multiple rectangles.
Signed-off-by: Daniel Semkowicz <dse@thaumatec.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Update the YUV shaders and the viewfinder_gl to correctly take the
Y'CbCr encoding and the quantization range into account when rendering
YUV formats to RGB. Support for the primaries and transfer function will
be added in a subsequent step.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kunal Agarwal <kunalagarwal1072002@gmail.com>
|
|
To prepare for color space support in the viewfinder, pass the color
space to the setFormat() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Add support for color space to the uvcvideo pipeline handler. UVC
devices have a fixed color space per format, so only the validate()
function needs to be extended to retrieve the color space from the
kernel. There is no need to pass the value back to the driver in
configure().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Provide colorimetry <=> libcamera::ColorSpace mappings via:
- GstVideoColorimetry colorimetry_from_colorspace(colorspace);
- ColorSpace colorspace_from_colorimetry(colorimetry);
Read the colorimetry field from caps into the stream configuration.
After stream validation, the sensor supported colorimetry will
be retrieved and the caps will be updated accordingly.
Colorimetry support for gstlibcamera currently undertakes only one
argument. Multiple colorimetry support shall be introduced in
subsequent commits.
Signed-off-by: Rishikesh Donadkar <rishikeshdonadkar@gmail.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The CameraConfiguration::validateColorSpaces() function performs color
space validation on a camera configuration, by validating the color
space of each stream individually, and optionally ensuring that all
streams share the same color space. The individual validation is very
basic, limited to ensuring that raw formats use a raw color space.
Color spaces are more constrained than that:
- The Y'CbCr encoding and quantization range for RGB formats must be
YcbcrEncoding::None and Range::Full respectively.
- The Y'CbCr encoding for YUV formats must not be YcbcrEncoding::None.
Instead of open-coding these constraints in the validateColorSpaces()
function, create a new ColorSpace::adjust() function to centralize color
space validation and adjustment, and use it in validateColorSpaces().
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Rectify the ColorSpace::Srgb to denote that it does not use
any Y'Cbcr encoding and uses full range.
The kernel on the other hand, recommends to use Rec601 as the encoding
for V4L2_COLORSPACE_SRGB. It is not very explicit but it can be
inferred that the kernel assumes V4L2_COLORSPACE_SRGB is a YUV-encoded
one. However, when the data is in RGB, no encoding is required (and
this is denoted by YcbcrEncoding::None in libcamera).
Hence, to be clear on the libcamera colorspace API, rectify the
ColorSpace::Srgb preset to use YcbcrEncoding::None and full range.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Wrap V4L2Device::toColorspace() inside a private static member
function in V4L2VideoDevice class. It improves readability in
setting the colorspace for V4L2DeviceFormat.
No functional changes intended.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
V4L2 has no "none" YCbCr encoding, and thus reports an encoding for all
formats, including RGB and raw formats. This causes the libcamera
ColorSpace to report incorrect encodings for non-YUV formats. Fix it by
overriding the encoding reported by the kernel to YCbCrEncoding::None
for non-YUV pixel formats and media bus formats.
Similarly, override the quantization range of non-YUV formats to full
range, as limited range isn't used for RGB and raw formats.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Store the colour encoding corresponding to a media bus format in the
V4L2SubdeviceFormatInfo structure. This will be used to implement color
space adjustments.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The Request::Private::reuse() is different from Request::reuse().
It resets the members of Request::Private to default values hence,
rename it to a more appropriate Request::Private::reset().
Update the usage and documentation accordingly.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
clang-tidy's bugprone-fold-init-type check warns about this:
> ../src/ipa/rkisp1/algorithms/lsc.cpp:61:14: warning: folding type 'double' into type 'float' might result in loss of precision [bugprone-fold-init-type]
> float sum = std::accumulate(sizes.begin(), sizes.end(), 0.0f);
> ^
Fixes: b3e96411d8a9 ("ipa: rkisp1: Add support of Lens Shading Correction control")
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The constructor of libcamera::File takes a const reference to a std::string
and clang-tidy's readability-redundant-string-cstr check warns about it:
> ../src/ipa/rkisp1/rkisp1.cpp:147:12: warning: redundant call to 'c_str' [readability-redundant-string-cstr]
> File file(settings.configurationFile.c_str());
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> settings.configurationFile
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The constructor of libcamera::File takes a const reference to a std::string
and clang-tidy's readability-redundant-string-cstr check warns about it:
> ../src/ipa/ipu3/ipu3.cpp:330:12: warning: redundant call to 'c_str' [readability-redundant-string-cstr]
> File file(settings.configurationFile.c_str());
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> settings.configurationFile
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
doxygen didn't create proper links to the overloads of
MediaDevice::link because the signatures didn't match due to an
additional 'const'
While at it remove the unnecessary `MediaDevice::` and wrap the lines
Fixes: b65feafe3244 ("libcamera: media_device: Add functions to get a MediaLink")
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Implement color space support in the rkisp1 pipeline handler, in the
configuration generation, configuration validation and camera
configuration. As all the processing related to the color space is
performed in the part of the pipeline shared by all streams, a single
color space must cover all stream configurations. This is enforced
manually when generating the configuration, and with the
validateColorSpaces() helper when validating it.
Only the Y'CbCr encoding and quantization range are currently taken into
account, and they are programmed through the V4L2 color space API. The
primary colors chromaticities and the transfer function need to be
configured in the ISP parameters buffer, and thus conveyed to the IPA,
but the rkisp1 driver does not currently support tone mapping, so this
will be done later.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Florian Sylvestre <fsylvestre@baylibre.com>
|
|
Add support for color space to the StreamKeyValueParser, allowing
selection of a color space on the command line.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Add a ColorSpace:fromString() function to parse a string into a color
space. The string can either contain the name of a well-known color
space, or four color space components separate by a '/' character.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Sort the members of the ColorSpace class in color_space.cpp to match the
color_space.h order. No functional change intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The JPEG color space is badly name, as the JPEG specification (ITU-T
T.81) doesn't define any particular color space:
The interchange format does not specify a complete coded image
representation. Application-dependent information, e.g. colour
space, is outside the scope of this Specification.
The JFIF specification (ITU-T T.871) is clearer as it requires ITU-R
BT.601 YCbCr encoding and a full quantization range:
The interpretations of Y, CB, and CR are derived from the E'Y, E'Cb,
and E'Cr signals defined in the 625-line specification of Rec. ITU-R
BT.601, but these signals are normalized so as to permit the usage of
the full range of 256 levels of the 8-bit binary encoding of the Y
component.
It however doesn't specify color primaries or a transfer function
explicitly. It only mentions the latter when describing the conversion
from YCbCr to RGB:
The inverse relationship for computing full scale 8-bit per colour
channel gamma pre-corrected RGB values (following Rec. ITU-R BT.601
gamma pre-correction and colour primary specifications) from YCbCr
colours (with 256 levels per component) can be computed as follows:
[...]
Given that ITU-R BT.601-5 (1995) didn't specify color primaries or a
transfer function, and that the later ITU-R BT.601-7 (2011) version
specifies color primaries for the 625-line variant that do not match
sRGB, the JPEG color space in libcamera is badly named. This is
confirmed by ITU-T T.871:
As this Recommendation | International Standard is based on the prior
informally-circulated JFIF version 1.02 specification that was
produced in 1992, which referenced Rec. ITU-R BT.601 (formerly CCIR
601), it references that specification for definition of the E'Y,
E'Cb, and E'Cr signals that correspond to the YCBCR values specified
herein. However, since the development of the prior JFIF version 1.02
specification, additional industry specifications have been developed,
Rec. ITU-R BT.601 has been updated, and common industry practice has
emerged which often follows the sYCC specification in IEC
61966-2-1/Amd.1. The difference between the use of the colour
interpretation specification in this Recommendation | International
Standard and that of the sYCC specification may be considered
negligible in practice.
Rename the color space to sYCC, as its definition matches the sYCC
standard, and indicate that it is typically used to encode JPEG images.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Using Size::expandTo() to find the max resolution might generate a non-existent
resolution. For example, when application request streams for 1920x1080 and
1600x1200, the max resolution will be wrongly 1920x1200 and fails the
configuration.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=139
Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use a const reference in range-based for loops to avoid copies of the
loop elements.
While at it, change looping over controls in
PipelineHandlerUVC::processControls to use structured bindings.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
libcamerasrc only supports three RGB formats. Adding the other RGB
formats supported by libcamera is trivial, do so.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The denoise pre-filter algorithm is a bilateral filter which combines a range
filter and a domain filter. The denoise pre-filter is applied before
demosaicing.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Add an enable variable in the lsc struct in IPASessionConfiguration
which indicates if the LSC hardware module is enabled. This will allow
other algorithms to retrieve this information.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Add an enable variable in the awb struct in IPASessionConfiguration
which indicates if the AWB hardware module is enabled. This will allow
other algorithms to retrieve this information.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The specializations of the YamlObject::get() function template for
integer types duplicate code that doesn't directly depend on the
template type argument. Move it to separate helper functions to reduce
the object size.
While at it, rephrase the comment about unsigned integer parsing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The YamlObject::get() function template is implemented for 16-bit and
32-bit integers. Add an 8-bit specialization that will be used in the
rkisp1 IPA module, and extend the unit tests accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The YamlObject::get() function specializations for 16-bit integers cast
the return value of strto(u)l() to a 16-bit integer, rendering the
bounds checking useless. Fix them.
Fixes: c7d260c03abd ("libcamera: yaml_parser: Add get() specializations for 16-bit integers")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
