summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2022-05-26ipa: camera_sensor_helper: Fix equation in exponential gain documentationLaurent Pinchart
The exponential gain documentation is missing a '\' in the equation. Fix t. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-25libcamera: controls: Controls for driving AF (autofocus) algorithmsDavid Plowman
This patch describes a series of controls that allow applications to drive AF algorithms: AfMode - manual, auto or continuous AfRange - full, macro or normal AfSpeed - fast or slow AfMetering - how to choose where to measure focus AfWindows - AF window locations AfTrigger - start (trigger) an AF scan or cancel AfPause - pause continuous AF LensPosition - set or retrieve position of lens AfState - reports whether scanning/success/failure AfPauseState - reports whether continuous AF paused or not Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-23cam: sdl_sink: Add MJPG support to SDL sinkEric Curtin
So we have at least two supported capturing pixel formats (although many possible output pixel formats thanks to SDL conversion). MJPG support only built in if SDL2_image is available, provides decompression. Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-23cam: sdl_sink: Add SDL sink with initial YUYV supportEric Curtin
This adds more portability to existing cam sinks. You can pass a YUYV camera buffer and SDL will handle the pixel buffer conversion to the display. This allows cam reference implementation to display images on VMs, Mac M1, Raspberry Pi, etc. This also enables cam reference implementation, to run as a desktop application in Wayland or X11. SDL also has support for Android and ChromeOS which has not been tested. Also tested on simpledrm Raspberry Pi 4 framebuffer successfully where existing kms sink did not work. Can also be used as kmsdrm sink. Only supports one camera stream at present. Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-23cam: event_loop: Add timer events to event loopEric Curtin
Extend the EventLoop class to support periodic timer events. This can be used to run tasks periodically, such as handling the event loop of SDL. Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-23cam: event_loop: Rename addEvent to addFdEventEric Curtin
With the addition of addTimerEvent, the naming of addEvent is specific to the management of an fd, while the naming is generic. Update the name to make the naming scheme consistent in specifying the type of event to be added. Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-23pipeline: raspberrypi: Fix possible null dereferenceNaushir Patuck
The freeBuffers() cleanup code calls into the IPA to unmap and free shared buffers. However, this function could be called before the IPA has opened (via registerCamera()), causing a segmentation fault. Fix this by guarding against calling the IPA if it has not been opened. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-22cam: Use script parser to set controlsJacopo Mondi
Add a "--script" option to the cam test application to allow specify a capture script to be used to drive the capture session. Add to the CameraSession class a script parser instance, created conditionally to the OptCaptureScript option. If the script parser has been created, use it at queueRequest time to retrieve the list of controls that has to be associated with a Request, and populate Request::controls() with it before queueing it to the Camera. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-22cam: Queue requests through CameraSession::queueRequest()Jacopo Mondi
The CameraSession::processRequest() frame completion handler currently re-queues completed requests by calling Camera::queueRequests() explicitely. In order to maintain the CameraSession::queuedRequest_ counter up to date with the actual number of queued requests, call the CameraSession::queueRequest() instead of operating the Camera directly. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-22cam: Add a parser for capture scriptsJacopo Mondi
Add a parser class to the cam test application to control the capture operations through a yaml script. The capture script currently allow to specify a list of controls and their associated values to be applied per-frame. Also add a trivial capture script example to showcase the intended script structure. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-05-20android: Drop gcc 7 compatibilityLaurent Pinchart
Now that we have dropped gcc 7 support, remove the compatibility with gcc versions older than 8 that implemented the filesystem API in the std::experimental namespace. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-05-19libcamera: formats: Add missing RGBX8888 infoTomi Valkeinen
Add missing RGBX8888 PixelFormatInfo. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-19libcamera: formats: Fix warning printTomi Valkeinen
Remove extra "0x" from the print. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: Clean up control enums generationTomi Valkeinen
Try to be more consistent with the names, and include "control" in all the names. Also drop a useless "using namespace libcamera" and only include "control_ids.h". Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: Rename pyxyz to py_xyzTomi Valkeinen
Having the underscore makes the names more readable, especially when there are multiple words in the name. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: Use geometry classesTomi Valkeinen
Now that we have proper geometry classes in the Python bindings, change the existing bindings and the .py files accordingly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: Add geometry classesTomi Valkeinen
Add libcamera's geometry classes to the Python bindings. Note that this commit only adds the classes, but they are not used anywhere yet. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: Implement PixelFormat classTomi Valkeinen
Implement PixelFormat bindings properly with a PixelFormat class. Change the bindings to use the new class instead of a string. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: cam_qt: Cosmetic cleanupsTomi Valkeinen
Drop irrelevant or wrong comments, merge separate_components() into demosaic(), and add mfb_to_rgb(). No functional changes. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: cam_kms: Fix multistream displayTomi Valkeinen
Instead of doing an atomic commit for each stream, do a single commit for the two planes. This fixes the issue that only the first plane was actually shown. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: cam_kms: Support multiplanar formatsTomi Valkeinen
Support multiplanar formats in the kms renderer. Tested with RPi and NV12. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: cam.py: Exit on exceptionTomi Valkeinen
Catch exceptions in the event_handler, as they would get ignored otherwise. Print the exception and return False so that the main loop exits. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: pymain: Fix indentTomi Valkeinen
Fix two minor mis-indents. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: Add comment about the symlinksTomi Valkeinen
Add comment about the symlinks to clarify the purpose. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: meson: Fix comment about stubsTomi Valkeinen
At least pyright seems to be able to use the stubs from the libcamera-stubs directory, so no need to copy the generated files. Adjust the comment accordingly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: meson: Use files() for custom_target input filesTomi Valkeinen
Use files() for the input files for the custom_target(). I believe the current code works, but perhaps it is safer to use files() here. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18ipa: ipu3: Put IPAFrameContext(s) in a ring bufferUmang Jain
Instead of having one frame context constantly being updated, this patch aims to introduce per-frame IPAFrameContext which are stored in a ring buffer. Whenever a request is queued, a new IPAFrameContext is created and inserted into the ring buffer. The IPAFrameContext structure itself has been slightly extended to store a frame id and a ControlList for incoming frame controls (sent in by the application). The next step would be to read and set these controls whenever the request is actually queued to the hardware. Since now we are working in multiples of IPAFrameContext, the Algorithm::process() will actually take in a IPAFrameContext pointer (as opposed to a nullptr while preparing for this change). Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-18ipa: libipa: Add frame context pointer in process()Umang Jain
Currently we have a single structure of IPAFrameContext but subsequently, we shall have a ring buffer (or similar) container to keep IPAFrameContext structures for each frame. It would be a hassle to query out the frame context required for process() (since they will reside in a ring buffer) by the IPA for each process. Hence, prepare the process() libipa template to accept a particular IPAFrameContext early on. As for this patch, we shall pass in the pointer as nullptr, so that the changes compile and keep working as-is. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-18ipa: ipu3: Rework IPAFrameContextUmang Jain
Currently, IPAFrameContext consolidates the values computed by the active state of the algorithms, along with the values applied on the sensor. Moving ahead, we want to have a frame context associated with each incoming request (or frame to be captured). This shouldn't necessarily be tied to "active state" of the algorithms hence: - Rename current IPAFrameContext -> IPAActiveState This will now reflect the latest active state of the algorithms and has nothing to do with any frame-related ops/values. - Re-instate IPAFrameContext with a sub-structure 'sensor' currently storing the exposure and gain value. Adapt the various access to the frame context to the new changes as described above. Subsequently, the re-instated IPAFrameContext will be extended to contain a frame number and ControlList to remember the incoming request controls provided by the application. A ring-buffer will be introduced to store these frame contexts for a certain number of frames. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-18meson: Compile libyaml as a subproject if not available on the systemLaurent Pinchart
AOSP doesn't ship libyaml, making it more difficult to compile libcamera for Android. Use a meson wrap to compile libyaml as a subproject if the dependency is not found. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-05-17py: Fix link generation to __init__.pyLaurent Pinchart
The command to create a symlink to the __init__.py file in the source directory uses a relative path from the build directory, which hardcodes the assumption that the build directory is a direct child of the source directory. This isn't always true. Fix it by using the files() function. Fixes: 8aa02271fd71 ("Add Python bindings") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
2022-05-13libipa: camera_sensor_helper: Add OV5675 helperQuentin Schulz
The OV5675 is an OmniVision sensor with a linear gain model, expressed in 1/128 steps. Cc: Quentin Schulz <foss+libcamera@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-13libcamera: camera_sensor: Add OV5675 sensor propertiesQuentin Schulz
Add an entry to the sensor properties for OmniVision OV5675. Only the first test pattern is included as the others that are exposed by the kernel aren't supported by libcamera control yet. Cc: Quentin Schulz <foss+libcamera@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-10py: Fix gen-py-control-enums.py referenceKieran Bingham
Scripts should be referenced using the meson files() directive to ensure the location is correctly identified with the relevant paths. This prevents compilation failures if the working directory does not match the source tree. Fixes: 6e92cb9dc49e ("py: Generate control enums from yaml") Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10v4l2_videodevice: Disable the watchdog timer when no buffers are queuedNaushir Patuck
Only enable/reset the watchdog timer when there are buffers queued in the V4L2 device. Otherwise, we may trigger spurious warnings when the watchdog times out even if there are no buffers queued in the device. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10libcamera: raspberrypi: Fetch correct value for SensorSensitivityDavid Plowman
These changes retrieve the correct value for sensitivity of the mode selected for the sensor. This value is known to the CamHelper which passes it across to the pipeline handler so that it can be set correctly in the camera properties. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10libcamera: Add a SensorSensitivity propertyNaushir Patuck
The SensorSensitivity property is a scaling factor that describes how sensitive the selected sensor mode is compared to other readout modes of the same sensor. For example, a binned mode might have twice the sensitivity of the full resolution mode, meaning you would get double the signal level for the same exposure and gains. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10py: Add cam.pyTomi Valkeinen
Add cam.py, which mimics the 'cam' tool. Four rendering backends are added: * null - Do nothing * kms - Use KMS with dmabufs * qt - SW render on a Qt window * qtgl - OpenGL render on a Qt window All the renderers handle only a few pixel formats, and especially the GL renderer is just a prototype. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10py: Generate control enums from yamlTomi Valkeinen
Generate enums for controls from control_ids.yaml. The generator script has some heuristics to generate nicer enum names. E.g. instead of having "LensShadingMapMode.LensShadingMapModeOff" we get "LensShadingMapMode.Off". This heuristics may need to be updated when the yaml file is changed or new controls are added. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10Add Python bindingsTomi Valkeinen
Add libcamera Python bindings. pybind11 is used to generate the C++ <-> Python layer. We use pybind11 'smart_holder' version to avoid issues with private destructors and shared_ptr. There is also an alternative solution here: https://github.com/pybind/pybind11/pull/2067 Only a subset of libcamera classes are exposed. Implementing and testing the wrapper classes is challenging, and as such only classes that I have needed have been added so far. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10meson: Use new project_*_root() functionsTomi Valkeinen
meson.source_root() and meson.build_root() are deprecated. Use meson.project_source_root() and meson.project_build_root() instead. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-10android: camera_hal_config: Use YamlParser to parse android HAL configHan-Lin Chen
Use YamlParser to parse android HAL config files, instead of handling YAML tokens directly, as a preparation for the further parameter extension. Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-10libcamera: Introduce YamlParser as a helper to parse yaml filesHan-Lin Chen
Introduce YamlParser as a helper to convert contents of a yaml file to a tree based structure for easier reading, and to avoid writing parser with raw yaml tokens. The class is based on libyaml, and only support reading but not writing a yaml file. The interface is inspired by Json::Value class from jsoncpp: http://jsoncpp.sourceforge.net/class_json_1_1_value.html Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-09ipa: raspberrypi: Demote noisy message to DebugLaurent Pinchart
The message that prints all controls in a request in IPARPi::queueRequest() is noisy. Demote it from Info to Debug. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2022-05-04libcamera: Replace toString with operator<<() for format classesLaurent Pinchart
Now that format classes implement the stream formatting operator<<(), use it instead of the toString() function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-05-04libcamera: Add operator<<() for V4L2 format classesLaurent Pinchart
Implement the stream output operator<<() for the V4L2DeviceFormat and V4L2SubdeviceFormat classes to simplify printing them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-05-04libcamera: bayer_format: Add operator<<()Laurent Pinchart
Implement the stream output operator<<() for the BayerFormat class to simplify printing them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-05-04libcamera: Add operator<<() for pixel format classesLaurent Pinchart
Implement the stream output operator<<() for the PixelFormat and V4L2PixelFormat classes to simplify printing them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-05-04libcamera: Replace toString with operator<<() for geometry classesLaurent Pinchart
Now that geometry classes implement the stream formatting operator<<(), use it instead of the toString() function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-04libcamera: object: Silence gcc false positive error in release modeLaurent Pinchart
gcc 10 and 11 produce an error when compiling libcamera in release mode: In file included from ../../src/libcamera/base/object.cpp:13: ../../include/libcamera/base/message.h: In member function ‘void libcamera::Object::notifyThreadMove()’: ../../include/libcamera/base/message.h:58:47: error: array subscript ‘const libcamera::InvokeMessage[0]’ is partly outside array bounds of ‘libcamera::Message [1]’ [-Werror=array-bounds] 58 | Semaphore *semaphore() const { return semaphore_; } | ^~~~~~~~~~ ../../src/libcamera/base/object.cpp:280:17: note: while referencing ‘msg’ 280 | Message msg(Message::ThreadMoveMessage); | ^~~ This seems to be a false positive, given that msg->type() can never be equal to Message::InvokeMessage in Object::message() when called from Object::notifyThreadMove(), as the message is created there with the Message::ThreadMoveMessage type. The problem as been reported in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105400, but the error nonetheless needs to be fixed without waiting for a new gcc release, and a dynamic_cast does the job with a small additional runtime cost that shouldn't be a big issue, given that moving objects between threads is a rare operation. Bug: https://bugs.libcamera.org/show_bug.cgi?id=125 Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>