| Age | Commit message (Collapse) | Author |
|---|
|
Add support for color space to the uvcvideo pipeline handler. UVC
devices have a fixed color space per format, so only the validate()
function needs to be extended to retrieve the color space from the
kernel. There is no need to pass the value back to the driver in
configure().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Provide colorimetry <=> libcamera::ColorSpace mappings via:
- GstVideoColorimetry colorimetry_from_colorspace(colorspace);
- ColorSpace colorspace_from_colorimetry(colorimetry);
Read the colorimetry field from caps into the stream configuration.
After stream validation, the sensor supported colorimetry will
be retrieved and the caps will be updated accordingly.
Colorimetry support for gstlibcamera currently undertakes only one
argument. Multiple colorimetry support shall be introduced in
subsequent commits.
Signed-off-by: Rishikesh Donadkar <rishikeshdonadkar@gmail.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The CameraConfiguration::validateColorSpaces() function performs color
space validation on a camera configuration, by validating the color
space of each stream individually, and optionally ensuring that all
streams share the same color space. The individual validation is very
basic, limited to ensuring that raw formats use a raw color space.
Color spaces are more constrained than that:
- The Y'CbCr encoding and quantization range for RGB formats must be
YcbcrEncoding::None and Range::Full respectively.
- The Y'CbCr encoding for YUV formats must not be YcbcrEncoding::None.
Instead of open-coding these constraints in the validateColorSpaces()
function, create a new ColorSpace::adjust() function to centralize color
space validation and adjustment, and use it in validateColorSpaces().
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Rectify the ColorSpace::Srgb to denote that it does not use
any Y'Cbcr encoding and uses full range.
The kernel on the other hand, recommends to use Rec601 as the encoding
for V4L2_COLORSPACE_SRGB. It is not very explicit but it can be
inferred that the kernel assumes V4L2_COLORSPACE_SRGB is a YUV-encoded
one. However, when the data is in RGB, no encoding is required (and
this is denoted by YcbcrEncoding::None in libcamera).
Hence, to be clear on the libcamera colorspace API, rectify the
ColorSpace::Srgb preset to use YcbcrEncoding::None and full range.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Wrap V4L2Device::toColorspace() inside a private static member
function in V4L2VideoDevice class. It improves readability in
setting the colorspace for V4L2DeviceFormat.
No functional changes intended.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
V4L2 has no "none" YCbCr encoding, and thus reports an encoding for all
formats, including RGB and raw formats. This causes the libcamera
ColorSpace to report incorrect encodings for non-YUV formats. Fix it by
overriding the encoding reported by the kernel to YCbCrEncoding::None
for non-YUV pixel formats and media bus formats.
Similarly, override the quantization range of non-YUV formats to full
range, as limited range isn't used for RGB and raw formats.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Store the colour encoding corresponding to a media bus format in the
V4L2SubdeviceFormatInfo structure. This will be used to implement color
space adjustments.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The Request::Private::reuse() is different from Request::reuse().
It resets the members of Request::Private to default values hence,
rename it to a more appropriate Request::Private::reset().
Update the usage and documentation accordingly.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
clang-tidy's bugprone-fold-init-type check warns about this:
> ../src/ipa/rkisp1/algorithms/lsc.cpp:61:14: warning: folding type 'double' into type 'float' might result in loss of precision [bugprone-fold-init-type]
> float sum = std::accumulate(sizes.begin(), sizes.end(), 0.0f);
> ^
Fixes: b3e96411d8a9 ("ipa: rkisp1: Add support of Lens Shading Correction control")
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The constructor of libcamera::File takes a const reference to a std::string
and clang-tidy's readability-redundant-string-cstr check warns about it:
> ../src/ipa/rkisp1/rkisp1.cpp:147:12: warning: redundant call to 'c_str' [readability-redundant-string-cstr]
> File file(settings.configurationFile.c_str());
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> settings.configurationFile
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The constructor of libcamera::File takes a const reference to a std::string
and clang-tidy's readability-redundant-string-cstr check warns about it:
> ../src/ipa/ipu3/ipu3.cpp:330:12: warning: redundant call to 'c_str' [readability-redundant-string-cstr]
> File file(settings.configurationFile.c_str());
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> settings.configurationFile
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
doxygen didn't create proper links to the overloads of
MediaDevice::link because the signatures didn't match due to an
additional 'const'
While at it remove the unnecessary `MediaDevice::` and wrap the lines
Fixes: b65feafe3244 ("libcamera: media_device: Add functions to get a MediaLink")
Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Implement color space support in the rkisp1 pipeline handler, in the
configuration generation, configuration validation and camera
configuration. As all the processing related to the color space is
performed in the part of the pipeline shared by all streams, a single
color space must cover all stream configurations. This is enforced
manually when generating the configuration, and with the
validateColorSpaces() helper when validating it.
Only the Y'CbCr encoding and quantization range are currently taken into
account, and they are programmed through the V4L2 color space API. The
primary colors chromaticities and the transfer function need to be
configured in the ISP parameters buffer, and thus conveyed to the IPA,
but the rkisp1 driver does not currently support tone mapping, so this
will be done later.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Florian Sylvestre <fsylvestre@baylibre.com>
|
|
Add support for color space to the StreamKeyValueParser, allowing
selection of a color space on the command line.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Add a ColorSpace:fromString() function to parse a string into a color
space. The string can either contain the name of a well-known color
space, or four color space components separate by a '/' character.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Sort the members of the ColorSpace class in color_space.cpp to match the
color_space.h order. No functional change intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The JPEG color space is badly name, as the JPEG specification (ITU-T
T.81) doesn't define any particular color space:
The interchange format does not specify a complete coded image
representation. Application-dependent information, e.g. colour
space, is outside the scope of this Specification.
The JFIF specification (ITU-T T.871) is clearer as it requires ITU-R
BT.601 YCbCr encoding and a full quantization range:
The interpretations of Y, CB, and CR are derived from the E'Y, E'Cb,
and E'Cr signals defined in the 625-line specification of Rec. ITU-R
BT.601, but these signals are normalized so as to permit the usage of
the full range of 256 levels of the 8-bit binary encoding of the Y
component.
It however doesn't specify color primaries or a transfer function
explicitly. It only mentions the latter when describing the conversion
from YCbCr to RGB:
The inverse relationship for computing full scale 8-bit per colour
channel gamma pre-corrected RGB values (following Rec. ITU-R BT.601
gamma pre-correction and colour primary specifications) from YCbCr
colours (with 256 levels per component) can be computed as follows:
[...]
Given that ITU-R BT.601-5 (1995) didn't specify color primaries or a
transfer function, and that the later ITU-R BT.601-7 (2011) version
specifies color primaries for the 625-line variant that do not match
sRGB, the JPEG color space in libcamera is badly named. This is
confirmed by ITU-T T.871:
As this Recommendation | International Standard is based on the prior
informally-circulated JFIF version 1.02 specification that was
produced in 1992, which referenced Rec. ITU-R BT.601 (formerly CCIR
601), it references that specification for definition of the E'Y,
E'Cb, and E'Cr signals that correspond to the YCBCR values specified
herein. However, since the development of the prior JFIF version 1.02
specification, additional industry specifications have been developed,
Rec. ITU-R BT.601 has been updated, and common industry practice has
emerged which often follows the sYCC specification in IEC
61966-2-1/Amd.1. The difference between the use of the colour
interpretation specification in this Recommendation | International
Standard and that of the sYCC specification may be considered
negligible in practice.
Rename the color space to sYCC, as its definition matches the sYCC
standard, and indicate that it is typically used to encode JPEG images.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Using Size::expandTo() to find the max resolution might generate a non-existent
resolution. For example, when application request streams for 1920x1080 and
1600x1200, the max resolution will be wrongly 1920x1200 and fails the
configuration.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=139
Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use a const reference in range-based for loops to avoid copies of the
loop elements.
While at it, change looping over controls in
PipelineHandlerUVC::processControls to use structured bindings.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
libcamerasrc only supports three RGB formats. Adding the other RGB
formats supported by libcamera is trivial, do so.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The denoise pre-filter algorithm is a bilateral filter which combines a range
filter and a domain filter. The denoise pre-filter is applied before
demosaicing.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Add an enable variable in the lsc struct in IPASessionConfiguration
which indicates if the LSC hardware module is enabled. This will allow
other algorithms to retrieve this information.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Add an enable variable in the awb struct in IPASessionConfiguration
which indicates if the AWB hardware module is enabled. This will allow
other algorithms to retrieve this information.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The specializations of the YamlObject::get() function template for
integer types duplicate code that doesn't directly depend on the
template type argument. Move it to separate helper functions to reduce
the object size.
While at it, rephrase the comment about unsigned integer parsing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The YamlObject::get() function template is implemented for 16-bit and
32-bit integers. Add an 8-bit specialization that will be used in the
rkisp1 IPA module, and extend the unit tests accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The YamlObject::get() function specializations for 16-bit integers cast
the return value of strto(u)l() to a 16-bit integer, rendering the
bounds checking useless. Fix them.
Fixes: c7d260c03abd ("libcamera: yaml_parser: Add get() specializations for 16-bit integers")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The variable 'ret' is assigned but not read until after the next
assignment.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
These headers are not used as reported by clangd.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The colorspace fields are read-only from an application point of view,
both on video devices and on subdevs, unless the
V4L2_PIX_FMT_FLAG_SET_CSC or V4L2_MBUS_FRAMEFMT_SET_CSC flags
(respectively) are set when calling the S_FMT ioctl.
Set the flags accordingly within the V4L2SubDevice and V4L2Device when
a colorspace is being set by the application.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for manually controlling the color gains on the rkisp1 IPA.
To that end, add and plumb the AwbEnable and ColourGains controls. As
per-frame controls aren't supported yet in the rkisp1 IPA, simply apply
and perform checks on the controls immediately.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Blocking wait can be easily implemented on top in Python, so rather than
supporting only blocking reads, or supporting both non-blocking and
blocking reads, let's support only non-blocking reads.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use libcamera's Mutex and MutexLocker instead of the std versions to get
thread safety annotations.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Set EFD_CLOEXEC on eventfd to avoid fd leaking.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use UniqueFD to automate the eventfd lifetime management.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Wrap the CameraManager with a PyCameraManager class and move the related
code inside the new class.
This helps understanding the life times of the used-to-be global
variables, gets rid of static handleRequestCompleted function, and
allows us to simplify the binding code as the more complex pieces are
inside the class.
There should be no user visible functional changes.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We define -DLIBCAMERA_BASE_PRIVATE to get access to libcamera private
headers, but the correct way to do this is to have a meson dependency to
libcamera_private.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The comment is no longer valid.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Clean up the py_main.cpp a bit by moving the ControlValue helpers to a
separate file.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add Python logging category, and use it in handleRequestCompleted().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
-C flag is supposed to affect only the camera that was previously
defined in the arguments. That's not the case, and, e.g.:
cam.py -c2 -C -c3
causes camera 3 to start capturing, but it stops after the initial
Requests have been completed.
Fix the issue by filtering out camera contexts that do not have -C
defined.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The message.h and mutex.h headers are not used in the libcamera public
API. Make them private to avoid there usage in applications, and to
prevent having to maintain them with a stable ABI.
As mutex.h is used by libcamerasrc, the GStreamer element must switch
from the libcamera_public to the libcamera_private dependency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Usage of find_library() to find dependencies that libcamera needs to
compile against can lead to the library being found even if the
corresponding headers are not installed. This will then result in a
compilation failure. Switch to dependency() for libdw, libunwind and
lttng-ust to fix this, all three libraries come with a pkgconfig file
that is usually installed by the distribution package that contains the
library headers.
Reported-by: Christian Rauch <Rauch.Christian@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
libcamera implements a pipeline handler locking mechanism based on
advisory locks on media devices, to prevent concurrent access to cameras
from the same pipeline handler from different processes (this only works
between multiple libcamera instances, as other processes won't use
advisory locks on media devices).
A side effect of the implementation prevents multiple cameras created by
the same pipeline handler from being used concurrently. Fix this by
turning the PipelineHandler lock() and unlock() functions into acquire()
and release(), with a use count to replace the boolean lock flag. The
Camera class is updated accordingly.
As a consequence of this change, the IPU3 pipeline handler will fail to
operate properly when the cameras it exposes are operated concurrently.
The android.hardware.camera2.cts.MultiViewTest#testDualCameraPreview
test fails as a result. This should be fixed in the IPU3 pipeline
handler to implement mutual exclusion between cameras.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
|
|
Commit f25ad4a2b16b ("libcamera: formats: Reimplement V4L2
PixelFormatInfo::info()") changed the PixelFormatInfo::info(const
V4L2PixelFormat &format) function overload to:
return info(format.toPixelFormat());
As part of the series that contains such commit, the PixelFormatInfo for the
pixel format applied to a video device is now retrieved at
V4L2VideoDevice::open() time. Some video devices register formats not
available to applications, for example metadata formats or, in the case
of ISP devices, formats to describe the ISP statistics and parameters.
This causes the
format.toPixelFormat()
call to output a WARN message, which spams the log and unnecessarily alerts
the users.
Augment V4L2PixelFormat::toPixelFormat() with an optional argument to
suppress warnings in the case a V4L2 pixel format is not known, to
restore the behaviour preceding commit f25ad4a2b16b and returns an
invalid PixelFormatInfo without outputting any unnecessary warning
message.
Fixes: f25ad4a2b16b ("libcamera: formats: Reimplement V4L2 PixelFormatInfo::info()")
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Replace the manual instantiation of algorithms with an automatic
mechanism based on a tuning data file, provided by the Module base
class. This brings the IPU3 IPA module in line with the RkISP1 IPA
module.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To prepare for dynamic instantiation of algorithms from the tuning file,
register the algorithms with the Module class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a tuning data file for uncalibrated sensors, picked by the pipeline
handler when no sensor-specific tuning file is available. The file lists
the 5 algorithms currently instantiated by the IPA module.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Pass the path name of the YAML IPA tuning file to the IPA module. The
file name is derived from the sensor name ("${sensor_name}.yaml"), with
a fallback to "uncalibrated.yaml".
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The YamlParser::get<>() function returns an std::optional<> to indicate
when YAML parsing failed.
The current implementation returns a default constructed std::optional
in case of errors with
return {};
This has been reported as generating compiler warnings with a gcc 9.3.0
arm64 cross-compiler:
../src/libcamera/yaml_parser.cpp:184:11: error: ‘<anonymous>’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
184 | return {};
| ^
Replace this with an explicit
return std::nullopt;
which fixes the warnings and conveys the purpose more explicitly.
Reported-by: Christian Rauch <Rauch.Christian@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The libcamera public API uses 'stride' to refer to the line stride.
Rename the SDLTexture::pitch_ member variable for consistency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
