summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2024-05-14libcamera: pipeline: Rename pipelines to a shorter nameJulien Vuillaumier
The PipelineHandlerFactoryBase class has a name that is propagated to the PipelineHandler instance it creates. In present implementation, this name comes from the REGISTER_PIPELINE_HANDLER registration macro. It corresponds to the stringified name of the PipelineHandler derived class. Therefore, PipelineHandler factories and instances names can be quite long such as "PipelineHandlerRkISP1". A libcamera user may have to explicitly refer to a PipelineHandler name for configuration purpose: one usage of the name can be to define a pipeline handlers match list and their priorities. It is desired, for user convenience, to use a short name to designate a pipeline handler. Reusing the short pipeline names already defined in the meson option files is an existing and consistent way of naming pipelines. This change adds an explicit name parameter to the REGISTER_PIPELINE_HANDLER registration macro. That parameter is used to define the name of a pipeline handler factory, instead of the current pipeline handler class name. Each pipeline registration is updated accordingly. The short name assigned corresponds to the pipeline directory name in the source tree. It is consistent with pipelines names used in meson. Changing the pipeline name has an impact on the IPA modules: each module defines a IPAModuleInfo structure. This structure has a pipelineName member defining the pipeline handler name it shall match with. Therefore, each internal IPA module definition has to be changed to have its IPAModuleInfo pipelineName name updated with the short pipeline handler name. In addition to this pipelineName member, the IPAModuleInfo structure also has a name member, associated to the IPA module name. Having renamed the pipelines to a short name, the pipeline name and the IPA module names of the IPAModuleInfo structure are the same: for in-tree IPA, they correspond to the respective pipeline and IPA subdirectories in the source tree. However the IPA name could be different, for instance with a close source IPA implementation built out-of-tree. Thus, it makes sense to keep the IPA name in that structure, as the 2 definitions may not always be redundant. Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> [Kieran: Adjust for clang-format style fix, reformat commitmsg] Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-14gstreamer: Use copied camera nameBarnabás Pőcze
The camera name is copied in gst_libcamera_src_open() as we can't hold the lock protecting the name while calling GST_ELEMENT_ERROR(). The GST_ELEMENT_ERROR() macro sends a message on the bus, taking more locks and possibly causing issues. However, the current code makes the copy, but does not actually use it. So fix that. Fixes: 58feb69f852289 ("gst: libcamerasrc: Implement selection and acquisition") Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-14gstreamer: Fix string memory leakBarnabás Pőcze
The string returned by `gst_video_colorimetry_to_string()` has to be freed, this was missing. Fixes: fc9783acc6083a ("gstreamer: Provide colorimetry <> ColorSpace mappings") Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-13ipa: libipa: histogram: Fix documentation of constructorLaurent Pinchart
Commit 1dc01bc9e6c3 ("ipa: libipa: histogram: Add transform parameter to constructor") added a new constructor for the Histogram class. The implementation is inline in the header file, and the documentation was added in the corresponding .cpp file, but it missed the \fn directive. This causes Doxygen to complain: src/ipa/libipa/histogram.h:31: warning: Member Histogram(Span< const uint32_t > data, Transform transform) (function) of class libcamera::ipa::Histogram is not documented. src/ipa/libipa/histogram.cpp:59: warning: libcamera::ipa::Histogram::bins has @param documentation sections but no arguments Fix it. Fixes: 1dc01bc9e6c3 ("ipa: libipa: histogram: Add transform parameter to constructor") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-05-09libcamera: Drop remaining file name from header comment blocksLaurent Pinchart
Source files in libcamera start by a comment block header, which includes the file name and a one-line description of the file contents. While the latter is useful to get a quick overview of the file contents at a glance, the former is mostly a source of inconvenience. The name in the comments can easily get out of sync with the file name when files are renamed, and copy & paste during development have often lead to incorrect names being used to start with. Readers of the source code are expected to know which file they're looking it. Drop the file name from the header comment blocks in all remaining locations that were not caught by the automated script as they are out of sync with the file name. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-05-09libcamera: Drop file name from header comment blocks in templatesLaurent Pinchart
Source files in libcamera start by a comment block header, which includes the file name and a one-line description of the file contents. While the latter is useful to get a quick overview of the file contents at a glance, the former is mostly a source of inconvenience. The name in the comments can easily get out of sync with the file name when files are renamed, and copy & paste during development have often lead to incorrect names being used to start with. Readers of the source code are expected to know which file they're looking it. Drop the file name from the header comment blocks in template files and templates embedded in generator scripts. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-05-09ipa: rkisp1: agc: Fix histogram constructionPaul Elder
This histogram reported by the rkisp1 hardware is 20 bits, where the upper 16 bits are meaningful integer data and the lower 4 bits are fractional and meant to be discarded. Remove these 4 bits when construction the histogram. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-09ipa: rpi: Fix for incorrectly reported max shutter speedNaushir Patuck
The maximum shutter speed calculation in the cam-helper relied on the frame duration limits being correctly set in the cam-helper's mode structure. This was not the case on first startup, so the maximum shutter speed reported back via the ControlInfo was incorrect. Fix this by setting up the camera mode in the cam-helper before querying for the max shutter value. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-09pipeline: rpi: Avoid duplicating size range for the same pixel formatDavid Plowman
Some V4L2 formats translate to the same pixel format, e.g. YU12 and YM12 both produce YUV420. In this case our ISP driver advertises the same size range for both, but we must not record the same thing twice for the same pixel format (which will cause a failure later on). Instead, ignore the V4l2 format if the pixel format has already been seen. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-09ipa: libipa: histogram: Add transform parameter to constructorPaul Elder
Add a parameter to the histogram constructor that takes a transformation function to apply to all the bins upon construction. This is necessary notably for the rkisp1, as the values reported from the hardware are 20 bits where the upper 16-bits are meaningful integer values and the lower 4 bits are fractional and meant to be discarded. As adding a right-shift parameter is probably too specialized, a generic function is added as a parameter instead. While at it, optimize the existing constructor to avoid push_back() into a vector with a known final size. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-08libcamera: Drop file name from header comment blocksLaurent Pinchart
Source files in libcamera start by a comment block header, which includes the file name and a one-line description of the file contents. While the latter is useful to get a quick overview of the file contents at a glance, the former is mostly a source of inconvenience. The name in the comments can easily get out of sync with the file name when files are renamed, and copy & paste during development have often lead to incorrect names being used to start with. Readers of the source code are expected to know which file they're looking it. Drop the file name from the header comment block. The change was generated with the following script: ---------------------------------------- dirs="include/libcamera src test utils" declare -rA patterns=( ['c']=' \* ' ['cpp']=' \* ' ['h']=' \* ' ['py']='# ' ['sh']='# ' ) for ext in ${!patterns[@]} ; do files=$(for dir in $dirs ; do find $dir -name "*.${ext}" ; done) pattern=${patterns[${ext}]} for file in $files ; do name=$(basename ${file}) sed -i "s/^\(${pattern}\)${name} - /\1/" "$file" done done ---------------------------------------- This misses several files that are out of sync with the comment block header. Those will be addressed separately and manually. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-05-08ipa: rkisp1: Remove bespoke Agc functionsDaniel Scally
Now that the rkisp1 Agc algorithm is a derivation of MeanLuminanceAgc we can remove the bespoke functions from the IPA's class. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: rkisp1: Derive rkisp1::algorithms::Agc from AgcMeanLuminanceDaniel Scally
Now that we have a AgcMeanLuminance class that centralises our AEGC algorithm, derive the RkISP1's Agc class from it and plumb in the necessary framework to enable it to be used. For simplicities sake this commit switches the algorithm to use the derived class, but does not remove the bespoke functions at this time. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: ipu3: Remove bespoke AGC functions from IPU3Daniel Scally
Now that the IPU3's Agc is derived from MeanLuminanceAgc we can delete all the unecessary bespoke functions. Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: ipu3: Derive ipu3::algorithms::Agc from AgcMeanLuminanceDaniel Scally
In preparation for switching to a derivation of AgcMeanLuminance, add a function to parse and store the statistics for easy retrieval in an overriding estimateLuminance() function. Now that we have a MeanLuminanceAgc class that centralises our AEGC algorithm, derive the IPU3's Agc class from it and plumb in the necessary framework to enable it to be used. For simplicity's sake this commit switches the algorithm to use the derived class, but does not remove the bespoke functions at this time. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: libipa: Add AgcMeanLuminance base classDaniel Scally
The Agc algorithms for the RkIsp1 and IPU3 IPAs do the same thing in very large part; following the Rpi IPA's algorithm in spirit with a few tunable values in that IPA being hardcoded in the libipa ones. Add a new base class for AgcMeanLuminance which implements the same algorithm and additionally parses yaml tuning files to inform an IPA module's Agc algorithm about valid constraint and exposure modes and their associated bounds. Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: libipa: Add ExposureModeHelperPaul Elder
Add a helper for managing exposure modes and splitting exposure times into shutter and gain values. Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: libipa: Allow creation of empty HistogramDaniel Scally
For convenience's sake allow the creation of empty Histograms so they can be embedded within other Classes and filled out with data at some later point in time. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-03apps: qcam: Use standard key sequence for quit actionLaurent Pinchart
Replace the manual CTRL+Q key sequence with QKeySequence::Quit. This automatically maps to the native shortcut for the quit action, regardless of the platform. Even though we don't expect qcam to run on non-Linux platform, using a QKeySequence is still a good practice when one exists. This doesn't change qcam's behaviour, as the native quit key sequence is CTRL+Q on Linux systems. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-05-03libcamera: shared_mem_object: Fix compilation with uClibcLaurent Pinchart
uClibc doesn't provide a memfd_create() implementation. Fix it by using a direct syscall when the function isn't available. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-05-03libcamera: utils: Avoid infinite recursion with strtod()Laurent Pinchart
When the C library doesn't provide local object support, the utils::strtod() function simply calls strtod() from the C library. The current implementation does so incorrectly, and calls utils::strtod() instead, resulting in infinite recursion. Fix it with a proper namespace qualifier. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-05-03libcamera: libipa: camera_sensor: Add Sony IMX415 sensor propertiesAlexander Stein
Provide the Sony IMX415 camera sensor properties and registration with libipa for the gain code helpers. The test patterns exposed by the IMX415 do not map well to the current set of test pattern controls supplied by libcamera. These are left intentionally unimplemented. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-03apps: cam: Fix C++20 deprecation warningBarnabás Pőcze
C++20 deprecated implicit capture of `this` via `[=]`. Fix that by explicitly capturing the necessary variables. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-03libcamera: libipa: camera_sensor: Add Sony IMX335 sensor propertiesKieran Bingham
Provide the Sony IMX335 camera sensor properties and registration with libipa for the gain code helpers. The test patterns exposed by the IMX335 do not map well to the current set of test pattern controls supplied by libcamera. These are left intentionally unimplemented. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-03libcamera: libipa: camera_sensor: Add Sony IMX283 sensor propertiesKieran Bingham
Provide the IMX283 camera sensor properties and registration with libipa for the gain code helpers. The test patterns exposed by the IMX283 do not map well to the current set of test pattern controls supplied by libcamera. These are left intentionally unimplemented. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2024-04-20android: camera_device: Always clear descriptors_ in stop()Anle Pan
When flush() is called and then a new stream configuration is set, the descriptors_ queue might have a chance to be not cleared in stop(), as the Camera is already in Stopped state. This will prevent further requests from being completed in sendCaptureResults() as the descriptors_ queue is not empty. To fix the issue, clear the descriptors_ even if the Camera State is Stopped. As a drawback the libcamera::Camera::stop() function might be called twice, but this is allowed by the Camera state machine, and the second call is guaranteed to be a nop. Signed-off-by: Anle Pan <anle.pan@nxp.com> Signed-off-by: Fang Hui <hui.fang@nxp.com> Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-20libcamera: device_enumerator: Fix spell errorUmang Jain
In the description of DeviceMatch, the word 'appropriate' is spelled incorrectly as 'appropriare'. Fix it. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: software_isp: Apply black level compensationMilan Zamazal
Black may not be represented as 0 pixel value for given hardware, it may be higher. If this is not compensated then various problems may occur such as low contrast or suboptimal exposure. The black pixel value can be either retrieved from a tuning file for the given hardware, or automatically on the fly. The former is the right and correct method, while the latter can be used when a tuning file is not available for the given hardware. Since there is currently no support for tuning files in software ISP, the automatic, hardware independent way, is always used. Support for tuning files should be added in future but it will require more work than this patch. The patch looks at the image histogram and assumes that black starts when pixel values start occurring on the left. A certain amount of the darkest pixels is ignored; it doesn't matter whether they represent various kinds of noise or are real, they are better to omit in any case to make the image looking better. It also doesn't matter whether the darkest pixels occur around the supposed black level or are spread between 0 and the black level, the difference is not important. An arbitrary threshold of 2% darkest pixels is applied; there is no magic about that value. The patch assumes that the black values for different colors are the same and doesn't attempt any other non-primitive enhancements. It cannot completely replace tuning files and simplicity, while providing visible benefit, is its goal. Anything more sophisticated is left for future patches. A possible cheap enhancement, if needed, could be setting exposure + gain to minimum values temporarily, before setting the black level. In theory, the black level should be fixed but it may not be reached in all images. For this reason, the patch updates black level only if the observed value is lower than the current one; it should be never increased. The purpose of the patch is to compensate for hardware properties. General image contrast enhancements are out of scope of this patch. Stats are still gathered as an uncorrected histogram, to avoid any confusion and to represent the raw image data. Exposure must be determined after the black level correction -- it has no influence on the sub-black area and must be correct after applying the black level correction. The granularity of the histogram is increased from 16 to 64 to provide a better precision (there is no theory behind either of those numbers). Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: debayer_cpu: Add BGR888 output supportHans de Goede
BGR888 is RGB888 with the red and blue pixels swapped, adjust the debayering to swap the red and blue pixels in the bayer pattern to add support for writing formats::BGR888. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: debayer_cpu: Add support for 8, 10 and 12 bpp unpacked bayer inputHans de Goede
Add support for 8, 10 and 12 bpp unpacked bayer input for all 4 standard bayer orders. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: swstats_cpu: Add support for 8, 10 and 12 bpp unpacked bayer inputHans de Goede
Add support for 8, 10 and 12 bpp unpacked bayer input for all 4 standard bayer orders. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: pipeline: simple: Enable use of Soft ISP and Soft IPAAndrey Konovalov
To enable the Simple Soft ISP and Soft IPA for simple pipeline handler configure the build with: -Dpipelines=simple -Dipas=simple Also using the Soft ISP for the particular hardware platform must be enabled in the supportedDevices[] table. It is currently enabled for and only for qcom-camss. If the pipeline uses Converter, Soft ISP and Soft IPA aren't available. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: pipeline: simple: Rename converterBuffers_ and related varsAndrey Konovalov
The converterBuffers_ and the converterQueue_ are not that specific to the Converter, and could be used by another entity doing the format conversion. Rename converterBuffers_, converterQueue_, and useConverter_ to conversionBuffers_, conversionQueue_ and useConversion_ to disassociate them from the Converter. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: Introduce SoftwareIspAndrey Konovalov
Doxygen documentation by Dennis Bonke. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Co-developed-by: Dennis Bonke <admin@dennisbonke.com> Signed-off-by: Dennis Bonke <admin@dennisbonke.com> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: ipa: Add Soft IPAAndrey Konovalov
Define the Soft IPA main and event interfaces, add the Soft IPA implementation. The current src/ipa/meson.build assumes the IPA name to match the pipeline name. For this reason "-Dipas=simple" is used for the Soft IPA module. Auto exposure/gain and AWB implementation by Dennis, Toon and Martti. Auto exposure/gain targets a Mean Sample Value of 2.5 following the MSV calculation algorithm from: https://www.araa.asn.au/acra/acra2007/papers/paper84final.pdf Use CameraSensorHelper to convert the analogue gain code read from the camera sensor into real analogue gain value. In the future this makes it possible to use faster AE/AGC algorithm. Right now the CameraSensorHelper lets us use the full range of analogue gain values. If there is no CameraSensorHelper for the camera sensor in use, a warning log message is printed. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Co-developed-by: Dennis Bonke <admin@dennisbonke.com> Signed-off-by: Dennis Bonke <admin@dennisbonke.com> Co-developed-by: Marttico <g.martti@gmail.com> Signed-off-by: Marttico <g.martti@gmail.com> Co-developed-by: Toon Langendam <t.langendam@gmail.com> Signed-off-by: Toon Langendam <t.langendam@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: software_isp: Add DebayerCpu classHans de Goede
Add CPU based debayering implementation. This initial implementation only supports debayering packed 10 bits per pixel bayer data in the 4 standard bayer orders. Doxygen documentation by Dennis Bonke. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Co-developed-by: Dennis Bonke <admin@dennisbonke.com> Signed-off-by: Dennis Bonke <admin@dennisbonke.com> Co-developed-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Co-developed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: software_isp: Add Debayer base classHans de Goede
Add a base class for debayer implementations. This is intended to be suitable for both GPU (or otherwise) accelerated debayer implementations as well as CPU based debayering. Doxygen documentation by Dennis Bonke. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Co-developed-by: Dennis Bonke <admin@dennisbonke.com> Signed-off-by: Dennis Bonke <admin@dennisbonke.com> Co-developed-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: software_isp: Add SwStatsCpu classHans de Goede
Add a CPU based SwStats implementation for SoftwareISP / SoftIPA use. This implementation offers a configure function + functions to gather statistics on a line by line basis. This allows CPU based software debayering to call into interleave debayering and statistics gathering on a line by line basis while the input data is still hot in the cache. This implementation also allows specifying a window over which to gather statistics instead of processing the whole frame. Doxygen documentation by Dennis Bonke. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Co-developed-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Co-developed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pavel Machek <pavel@ucw.cz> Co-developed-by: Dennis Bonke <admin@dennisbonke.com> Signed-off-by: Dennis Bonke <admin@dennisbonke.com> Co-developed-by: Marttico <g.martti@gmail.com> Signed-off-by: Marttico <g.martti@gmail.com> Co-developed-by: Toon Langendam <t.langendam@gmail.com> Signed-off-by: Toon Langendam <t.langendam@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: shared_mem_object: Reorganize the code and document the ↵Andrei Konovalov
SharedMemObject class The SharedMemObject class template contains a fair amount of inline code that does not depend on the template types T. To avoid duplicating it in every template specialization, split that code to a separate base SharedMem class. We don't define copy semantics for the classes (we don't need one at the moment) and we make them non-copyable since the default copy constructor would lead to use-after-unmap. Doxygen documentation by Dennis Bonke and Andrei Konovalov. Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Co-developed-by: Dennis Bonke <admin@dennisbonke.com> Signed-off-by: Dennis Bonke <admin@dennisbonke.com> Signed-off-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: internal: Move SharedMemObject class to a common directoryAndrey Konovalov
Move SharedMemObject class out of RPi namespace and put it into include/libcamera/internal so that everyone could use it. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: dma_heaps: extend DmaHeap class to support system heapAndrey Konovalov
Add an argument to the constructor to specify dma heaps type(s) to use. Can be DmaHeapFlag::Cma and/or DmaHeapFlag::System. By default DmaHeapFlag::Cma is used. If both DmaHeapFlag::Cma and DmaHeapFlag::System are set, CMA heap is tried first. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: internal: Move dma_heaps.[h, cpp] to common directoriesAndrey Konovalov
DmaHeap class is useful outside the RPi pipeline handler too. Move dma_heaps.h and dma_heaps.cpp to common directories. Update the build files and RPi vc4 pipeline handler accordingly. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: pipeline: simple: fix size adjustment in validate()Andrey Konovalov
SimpleCameraConfiguration::validate() adjusts the configuration of its streams (if the size is not in the outputSizes) to the captureSize. But the captureSize itself can be not in the outputSizes, and then the adjusted configuration won't be valid resulting in camera configuration failure. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-03-28apps: cam: Add support for PPM output formatMilan Zamazal
When file output is requested from cam app, it simply dumps the processed data and it must be converted to a readable image format manually. Let's add support for PPM output file format to make files produced by cam directly readable by image display and processing software. For now, only BGR888 output format, which is the simplest one to use, is supported but nothing prevents adding support for other output formats if needed. Nevertheless, they would typically need byte reordering or other conversions for PPM file format. It may be better to find a way to dump the image data in other output formats directly using some of the already existing file formats or raw file format converters. Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-03-27v4l2: meson: Keep defines sorted alphabeticallyLaurent Pinchart
Due to my mistake, commit 705601781b6a ("v4l2: Unset _TIME_BITS in addition to _FILE_OFFSET_BITS") got merged with incorrect sorting of defines. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-03-27v4l2: Unset _TIME_BITS in addition to _FILE_OFFSET_BITSSteve Langasek
libcamera fails to build from source in Debian/Ubuntu on 32-bit architectures under 64-bit time_t (to avoid the 'year 2038 problem'), because its v4l2 module legitimately un-sets _FILE_OFFSET_BITS for building but this is not allowed without also unsetting _TIME_BITS. Having verified that nothing in this module is sensitive to 64-bit time_t (none of the functions it intercepts handle time), we also unset _TIME_BITS to allow this to build as before. Signed-off-by: Steve Langasek <steve.langasek@canonical.com> Reviewed-by: Dylan Aïssi <dylan.aissi@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-03-26libcamera: pipeline: Add Mali-C55 ISP pipelineJacopo Mondi
Add a pipeline handler for the Mali-C55 ISP. The pipeline doesn't currently support an IPA and does not run any 3a algorithm but only handles the media graph topology and formats/sizes configuration Co-developed-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Acked-by: Nayden Kanchev <nayden.kanchev@arm.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-03-22android: camera_device: Save capture settings unconditionallyFang Hui
As the Android framework sends to the camera device settings incrementally (only the ones that change are updated), the CameraDevice class in the Android camera HAL keeps a copy of the last received settings to be able to apply controls to the libcamera Camera and to populate metadata correctly. When a valid 'camera3Request->settings' is provided, it gets saved to 'lastSettings_' but 'descriptor->settings_' is not initialized until the next frame (assuming it does not contain more settings). Fix this by assigning to 'descriptor->settings_' the last saved settings unconditionally. Signed-off-by: Fang Hui <hui.fang@nxp.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2024-03-20apps: lc-compliance: Re-organize source directoryJacopo Mondi
Before adding more tests and more helper classes to lc-compliance, reorganize the source tree to split test and helpers in two separate directories. While at it, rename the 'SimpleCapture' class and its derived classes to just 'Capture'. Rename the source files accordingly. Re-sort headers inclusions to please checkstyle.py too. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Tested-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-03-20apps: lc-compliance: Fix typo in commentJacopo Mondi
Fix a small typo in a comment. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>