| Age | Commit message (Collapse) | Author |
|---|
|
When libcamera is built and tested before installing, it will
be unable to locate the path to proxy workers, or previously
installed files in the system path may be incorrect to load.
Hence, when libcamera is not installed, but is running from a build
tree, identify the location of that tree by using libcameraPath(), and
from that point add relative path to the proxy workers directory.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPA proxy manager will need to find the libcamera build path exactly
the same way as the IPA module mnager. Move the isLibcameraInstalled()
and libcameraPath() functions to utils to make them reusable.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
User environment path in LIBCAMERA_IPA_PROXY_PATH should take precedence
over system loading locations. Change precedence accordingly
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Replace the manual string splitting with utils::split()
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The stream in the stream configuration is not filled in before we
configure the camera, move the generating and caching of names after the
configuration.
Without this fix writing multiple streams to disk overwrites the frames
as the filenames are not unique.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add further support to the pixel format convertor to allow ARGB, RGBA,
and ABGR formats to be displayed in qcam.
Blank lines are added between the sections for NV, RGB, YUV, and MJPEG
configurations.
The implementation of the RGB conversions are highly inefficient, and
where possible should be extended to use hardware accelerations such as
OpenGL, or in the event that the input format is identical (or
compatible) with the output format - a more optimised memcpy should be
implemented.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
gcc 8.3.0 for ARM complains about strict aliasing violations:
../../src/libcamera/controls.cpp: In member function ‘void libcamera::ControlValue::release()’:
../../src/libcamera/controls.cpp:111:13: error: dereferencing type-punned pointer will break strict-aliasing rules [-Werror=strict-aliasing]
delete[] *reinterpret_cast<char **>(&storage_);
Fix it and simplify the code at the same time.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When compiling for ARM and uClibc, gcc-8.3.0 complains about comparison
of integer expressions of different signedness:
../../src/v4l2/v4l2_camera_proxy.cpp: In member function ‘void* V4L2CameraProxy::mmap(void*, size_t, int, int, off_t)’:
../../src/v4l2/v4l2_camera_proxy.cpp:88:25: error: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘off_t’ {aka ‘long int’} [-Werror=sign-compare]
if (index * sizeimage_ != offset || length != sizeimage_) {
~~~~~~~~~~~~~~~~~~~^~~~~~~~~
Fix the compilation error with a cast.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The v4l2-compat shared library is declared as depending on
libcamera_deps. This is not correct, as libcamera_deps contains the
dependencies of libcamera itself. The correct dependency for users of
libcamera is libcamera_dep.
Fixing this allows dropping libcamera_includes from the list of includes
required by v4l2-compat, and libcamera from the link_with list, as they
are already contained in libcamera_dep. We however need to add an
explicit dependency on libdl which was previously provided by
libcamera_deps.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The cam application makes use if std::atomic<>, link against libatomic
if needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
libcamera.so links against libatomic and libdl, and handles those
dependencies directly in the shared_object() call. More components
within libcamera will need those dependencies, extract them to named
variables to make them reusable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The libcamera_api array is meant to contain all the headers from the
libcamera public API, for the purpose of generating documentation and
creating the libcamera_dep dependency. libcamera.h is part of the
libcamera public API, add it to the array.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Commit 17cccc68a88f ("Add GStreamer plugin and element skeleton") has
gained a last minute fix for a clang compilation error with GLib prior
to v2.63.0. The fix wasn't properly tested, and failed to check the GLib
dependency correctly. This resulted in compilation of the GStreamer
element to always be disabled.
Fix this by changing the GLib package name from 'glib' to 'glib-2.0'.
Fixes: 17cccc68a88f ("Add GStreamer plugin and element skeleton")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
|
|
The top-level plugin file gstlibcamera.c is the only C source file in
the whole libcamera GStreamer element. To avoid specifying both C and
C++ compiler arguments in the future, turn it into a C++ file.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
|
|
Allow GstLibcameraPool to notify the source when a new buffer has become
available in a previously exhausted buffer pool. This can be used to
resume a src task that got paused because it couldn't acquire a buffer.
Without this change the src task will never resume from pause once the
pool gets exhausted.
To trigger the deadlock (it doesn't happen every time), run:
gst-launch-1.0 libcamerasrc ! queue ! glimagesink
Signed-off-by: Jakub Adam <jakub.adam@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Task resume will be added in the core GStreamer API in the future and
we will need to call this in another location in the following patches.
Signed-off-by: Jakub Adam <jakub.adam@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This is to guide upcoming contributors toward what is left to do to get
toward a production ready element.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This is an experimental patch adding timestamp support to the libcamerasrc
element. This patch currently assume that the driver timestamp are relative to
the system monotonic clock. Without a reference clock source, the timestamp are
otherwise unusable, and without timestamp only minor use case can be achieved.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
With this patch, the element is now able to push buffers to the next
element in the graph. The buffers are currently missing any metadata
like timestamp, sequence number. This will be added in the next commit.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
These will be useful for streaming. The requestComplete callback will
store the buffers on each pads so that the _run() can pick them up
and push them through the pads from a streaming thread.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This adds getters on pad/pool/allocator so that we can retrieve the
Stream or FrameBuffer.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Setup the allocation and the release of buffers in the
element. We have one pooling GstAllocator that wraps the
FrameBufferAllocator and tracks the lifetime of FrameBuffer
objects. Then, for each pad we have a GstBufferPool object
which is only used to avoid re-allocating the GstBuffer
structure every time we push a buffer.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This adds get/set helper to store a pool on the pad.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This is needed to track the lifetime of the FrameBufferAllocator in relation to
the GstBuffer/GstMemory objects travelling inside GStreamer.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that we have stream-start and caps, we can now push a segment event to
announce what time will our buffer correlate to. For live sources this is just
an open segment in time format.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This is not expected to work in every possible cases, but should be sufficient as
an initial implementation. What it does is that it turns the StreamFormats into
caps and queries downstream caps with that as a filter.
The result is the subset of caps that can be used. We then keep the first
structure in that result and fixate using the default values found in
StreamConfiguration as a default in case a range is available.
We then validate this configuration and turn the potentially modified
configuration into caps that we push downstream. Note that we trust the order
in StreamFormats as being sorted best first, but this is not currently in
libcamera. A todo has been added in the head of this file as a reminder to fix
that in the core.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This adds helpers to deal with the conversion from StreamConfiguration
to caps and vice-versa. This is needed to implement caps negotiation.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Prior to sending caps, we need to send a stream-start event. This requires
generating a stream and a group id. The stream id is random for live sources and
the group id is shared across all pads.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This will allow implementing generic algorithm even if we cannot
request pads yet.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Each pad can have a different roles. Users will have to request and configure
their pads role before moving to a higher state.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use a GstTask as our internal streaming thread. Unlike GstBaseSrc, we
will be running a streaming thread at the element level rather than
per pad. This is needed to combine buffer request for multiple pads.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This adds code to select and acquire a camera. With this, it is now
possible to run a pipeline like:
gst-launch-1.0 libcamerasrc ! fakesink
Though no buffer will be streamed yet. In this function, we implement the
change_state() virtual method to trigger actions on specific state transitions.
Note that we also return GST_STATE_CHANGE_NO_PREROLL in
GST_STATE_CHANGE_READY_TO_PAUSED and GST_STATE_CHANGE_PLAYING_TO_PAUSED
transitions as this is required for all live sources.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This will allow selecting libcamerasrc traces with the following
environment:
GST_DEBUG=libcamerasrc:7
Or all libcamera GStreamer element traces using
GST_DEBUG="libcamera*:7"
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This property will be used to select by name the camera to use.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This pad will always be present and will allow simple pipeline to be used to
stream from the camera.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This simply adds the boiler plate for pads on the source element. The
design is that we have one pad, called "src", that will always be
present, and then more pads can be requested prior in READY or less
state. Initially pads have one property "stream-role" that let you
decide which role this pad will have.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
While GLib has locker implementation already using g_autoptr(), recursive mutex
locker was only introduced in recent GLib. Implement a simple locker for GMutex
and GRectMutex in order to allow making locking simpler and safer.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This feature is used with GstDeviceMonitor in order to enumerate
and monitor devices to be used with the source element. The resulting
GstDevice implementation is also used by application to abstract the
configuration of the source element.
Implementation notes:
- libcamera does not support polling yet
- The device ID isn't unique in libcamera yet
- The "name" property does not yet exist in libcamerasrc yet
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This transforms the basic information found in StreamFormats to GstCaps.
This can be handy to reply to early caps query or inside a device
provider. Note that we ignored generated range as they are harmful to
caps negotiation. We also don't simplify the caps for readability
reasons, so some of the discrete value may be included in a range.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This implements the GStreamer plugin interface and adds libcamerasrc
element feature to it. This is just enough to allow plugin
introspection.
gst-inspect-1.0 build/src/gstreamer/libgstlibcamera.so
Plugin Details:
Name libcamera
Description libcamera capture plugin
Filename build/src/gstreamer/libgstlibcamera.so
Version 0.0.0+1042-6c9f16d3-dirty
License LGPL
Source module libcamera
Binary package libcamera
Origin URL https://libcamera.org
libcamerasrc: libcamera Source
1 features:
GST_PLUGIN_PATH=$(pwd)/build/src/gstreamer gst-inspect-1.0 libcamerasrc
Factory Details:
Rank primary (256)
Long-name libcamera Source
Klass Source/Video
Description Linux Camera source using libcamera
Author Nicolas Dufresne <nicolas.dufresne@collabora.com
Plugin Details:
Name libcamera
Description libcamera capture plugin
Filename /home/nicolas/Sources/libcamera/build/src/gstreamer/libgstlibcamera.so
Version 0.0.0+1042-6c9f16d3-dirty
License LGPL
Source module libcamera
Binary package libcamera
Origin URL https://libcamera.org
GObject
+----GInitiallyUnowned
+----GstObject
+----GstElement
+----GstLibcameraSrc
Pad Templates:
none
Element has no clocking capabilities.
Element has no URI handling capabilities.
Pads:
none
Element Properties:
name : The name of the object
flags: accès en lecture, accès en écriture, 0x2000
String. Default: "libcamerasrc0"
parent : The parent of the object
flags: accès en lecture, accès en écriture, 0x2000
Object of type "GstObject"
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Silence -Wunused-function warning for older GLib versions]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The std::atomic_uint64_t specialization was missing from C++14, and only
added to C++17 (see LWG 2441). It was treated as a Defect Report and
backported to earlier C++ standards by gcc and clang, but is missing
from libstdc++ shipped with gcc 5 and gcc 6. Fix the compilation error
by using std::atomic<uint64_t> instead.
Fixes: 4e0d1eca10b7 ("libcamera: V4L2BufferCache: Improve cache eviction strategy")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The strategy used to find a free cache entry in the first implementation
was not the smartest, it picked the first free entry. This lead to
unwanted performance issues as the cache was not used as good as it
could for imported buffers.
Improve this by adding a last usage sequence number to the cache entries
and change the eviction strategy to use the oldest free entry instead of
the first one it finds.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Check for a hot cache hit before updating which buffer is best to evict
in case no hot hit is found. This doesn't change the behaviour, but
follows a more logical flow.
Suggested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Instead of looking up the index in the storage vector use the reference
to it created at the beginning of the loop.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The comparison operator does not change any state, mark it as const.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add the '-p'|'--list-properties' option to the cam application to list
the properties of a camera.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for serializing and deserializing control values that store
arrays of values. The serialized format is extended to explicitly handle
arrays.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Use the zero-copy variant of ByteStreamBuffer::read() to read packet
headers and control entries. This enhances the performance of
ControlList and ControlInfoMap deserialization.
Deserialization of the actual ControlValue is untouched for now and will
be optimized later.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.binghm@ideasonboard.com>
|
|
Use the ControlValue::data() function to access raw data stored in the
control value and simplify serialization.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.binghm@ideasonboard.com>
|
|
Replace the default case with an explicit ControlTypeNone case in
ControlSerializer::load() to catch omissions when adding new control
types.
A return statement needs to be added to the end of the function to avoid
gcc incorrectly reporting that some exit paths don't contain a return
statement. The compiler will still warn that not all cases are handled
when adding a new control type.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
