summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-09-30android: camera_device: Transform descriptors_ map to queueUmang Jain
The descriptors_ map holds Camera3RequestDescriptor(s) which are per-capture requests placed by the framework to libcamera HAL. CameraDevice::requestComplete() looks for the descriptor for which the camera request has been completed and removes it from the map. Since the requests are placed in form of FIFO and the framework expects the order of completion to be FIFO as well, this calls for a need of a queue rather than a std::map. This patch still keeps the same lifetime of Camera3RequestDescriptor as before i.e. in the requestComplete(). Previously, a descriptor was extracted from the map and its lifetime was bound to requestComplete(). The lifetime is kept the same by manually calling .pop_front() on the queue. In the subsequent commit, this is likely to change with a centralized location of dropping descriptors from the queue for request completion. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-09-30android: camera_worker: Use Camera3RequestDescriptor as cookieUmang Jain
Use Camera3RequestDescriptor as cookie for the Capture Request. The cookie is used to lookup descriptors map in CameraDevice::requestComplete(). The map will be transformed to a queue in subsequent commit. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-09-29android: Wait on fences in CameraStream::process()Jacopo Mondi
Acquire fences for streams of type Mapped generated by post-processing are not correctly handled and are currently ignored by the camera HAL. Fix this by adding CameraStream::waitFence(), executed before starting the post-processing in CameraStream::process(). The change applies to all streams generated by post-processing (Mapped and Internal) but currently acquire fences of Internal streams are handled by the camera worker. Postpone that to post-processing time by passing -1 to the Worker for Internal streams. Also correct the release_fence handling for failed captures, as the framework requires the release fences to be set to the acquire fence value if the acquire fence has not been waited on. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Tested-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-28meson: Set a SONAME version in the libcamera librariesJavier Martinez Canillas
The libcamera and libcamera-base libraries are currently unversioned, but donwstream users expect these to have a proper SONAME version in order to package them. A stable release has not yet happened because the project is still under development and the API/ABI might change. But having a versioned SONAME would allow distributions to package libcamera, without the need to add any downstream patch to set the version. Since the "0.0.0" version is already used in different places, let's also use that as the library version. The meson build system will use the first part of the version ("0") as the SONAME version, which is aligned with the convention used by other projects: $ ls /lib64/libcamera*so* -1 /lib64/libcamera-base.so /lib64/libcamera-base.so.0 /lib64/libcamera-base.so.0.0.0 /lib64/libcamera.so /lib64/libcamera.so.0 /lib64/libcamera.so.0.0.0 $ objdump -p /lib64/libcamera.so.0.0.0 | grep SONAME SONAME libcamera.so.0 Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-28android: camera_device: Fix race on queuing capture requestUmang Jain
The Camera3RequestDescriptor containing the capture request is added to the descriptors_ map after a call to CameraWorker::queueRequest(). This is a race condition since CameraWorker::queueRequest() queues requests to libcamera::Camera asynchronously. The requests may thus complete before they get added to descriptors_, in which case requestComplete() will fail to lookup the request in the map. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2021-09-28gstreamer: Fix spelling of the work manager used in a util functionVedant Paranjape
Fix all name in all instances of the function gst_libcamera_get_camera_mananger to gst_libcamera_get_camera_manager. Spelling of manager was incorrect. This patch has no functional changes. Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-28libcamera: control_serializer: Fix usage of uninitialized variableLaurent Pinchart
The idMap variable may be used uninitialized in the ControlSerializer::deserialize<ControlList>() function as reported by gcc 11: ../../src/libcamera/control_serializer.cpp: In member function ‘T libcamera::ControlSerializer::deserialize(libcamera::ByteStreamBuffer&) [with T = libcamera::ControlList]’: ../../src/libcamera/control_serializer.cpp:609:33: error: ‘idMap’ may be used uninitialized in this function [-Werror=maybe-uninitialized] 609 | ControlList ctrls(*idMap); | This is due to a missing default case in a switch/case. Fix it by adding the default case. Fixes: 6b1404fc4836 ("libcamera: control_serializer: Fix usage of uninitialized variable") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-09-27android: Fix generation of thumbnail for EXIF dataUmang Jain
Generation of thumbnail is not occuring currently because ANDROID_JPEG_THUMBNAIL_SIZE is not set for request metadata passed to PostProcessorJpeg::process(). The commit 1264628d3c92("android: jpeg: Configure thumbnailer based on request metadata") introduced the mechanism to retrieve the thumbanil size from request metadata, however it didn't add the counterpart i.e. inserting the size in the request metadata in request metadata template, at the first place. The patch fixes this issue by setting ANDROID_JPEG_THUMBNAIL_SIZE in the request metadata template populated by CameraCapabilities::requestTemplatePreview(). The value for ANDROID_JPEG_THUMBNAIL_SIZE is set to be the first non-zero size reported by static metadata ANDROID_JPEG_AVAILABLE_THUMBNAIL_SIZES. Fixes: 1264628d3c92("android: jpeg: Configure thumbnailer based on request metadata") Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-09-27android: camera_capabilities: Clarify CameraMetadata allocationUmang Jain
CameraMetadata's constructor take in number of entries and number of bytes to be allocated for those entries. However, CameraMetadata is already capable of resizing its container on the fly, in case more entries are added to it. Hence, the numbers passed in during the construction acts as hint values for initialization. Clarify this in CameraCapabilities::requestTemplatePreview() and remove the \todo, as the arguments and the \todo gives the perspective that we need to be quite accurate with the numbers of entries / bytes, which is not the case. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-09-27libcamera: control_serializer: Separate the handles spaceJacopo Mondi
Two independent instances of the ControlSerializer class are in use at the IPC boundaries, one in the Proxy class that serializes data from the pipeline handler to the IPA, and one in the ProxyWorker which serializes data in the opposite direction. Each instance operates autonomously, without any centralized point of control, and each one assigns a numerical handle to each ControlInfoMap it serializes. This creates a risk of potential collision on the handle values, as both instances will use the same numerical space and are not aware of what handles has been already used by the instance "on the other side". To fix that, partition the handles numerical space by initializing the control serializer with a seed according to the role of the component that creates the serializer and increment the handle number by 2, to avoid any collision risk. While this is temporary and rather hacky solution, it solves an issue with isolated IPA modules without too much complexity added. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-27libcamera: control_serializer: Serialize info::def()Jacopo Mondi
The ControlInfo class was originally designed to only transport the control's minimum and maximum values which represent the control's valid limits. Later the default value of the control has been added to the ControlInfo class, but the control serializer implementation has not been updated accordingly. This causes issues in IPA modules making use of ControlInfo::def() as, when running in isolation, they would receive 0. Fix that by serializing and deserializing the additional ControlValue and update the protocol description accordingly. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-27libcamera: control_serializer: Use the right idmapJacopo Mondi
When a ControlList is deserialized, the code searches for a valid ControlInfoMap in the local cache and use its id map to initialize the list. If no valid ControlInfoMap is found, as it's usually the case for lists transporting libcamera controls and properties, the globally defined controls::controls id map is used unconditionally. This breaks the deserialization of libcamera properties, for which a wrong idmap is used at construction time. As the serialization header now transports an id_map_type field, store the idmap type at serialization time, and re-use it at deserialization time to identify the correct id map. Also make the validation stricter by imposing to list of V4L2 controls to have an associated ControlInfoMap available, as there is no globally defined idmap for such controls. To be able to retrieve the idmap associated with a ControlList, add an accessor function to the ControlList class. It might be worth in future using a ControlInfoMap to initialize the deserialized ControlList to implement controls validation against their limit. As such validation is not implemented at the moment, maintain the current behaviour and initialize the control list with an idmap. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-27libcamera: ipu3: Drop entityControls mapJacopo Mondi
The IPA::configure() function has an IPAConfigInfo parameters which contains a map of numerical indexes to ControlInfoMap instances. This is a leftover of the old IPA protocol, where it was not possible to specify a rich interface as it is possible today and each entity ControlInfoMap was indexed by a numerical id and stored in a map. Now that the IPA interface allows to specify parameters by name, drop the map and send the sensor's control info map only. If we'll need more ControlInfoMap to be shared with the IPA, a new parameter can be added to IPAConfigInfo. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-26libcamera: camera_manager: Fix utils.h #include locationLaurent Pinchart
The utils.h header #include is separate from the rest of the group for no reason. Move it to where it should be. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-09-24android: camera_device: Return unique_ptr from createFrameBufferLaurent Pinchart
Returning a non-managed pointer can cause leaks. Use a unique_ptr<> instead to avoid possible future issues. The std::move() for the planes argument to the FrameBuffer constructor is dropped as it's misleading. FrameBuffer has no constructor that takes an rvalue reference to planes, so the vector was copied despite the move. This only clarifies the intent, no functional change is introduced. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-24libcamera: v4l2_videodevice: Don't move planes to construct FrameBufferLaurent Pinchart
The FrameBuffer class has no constructor that takes an rvalue reference to planes. The std::move() is thus misleading as a copy will still take place. Drop it to clarify the code, no functional change is introduced. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-22gstreamer: Convert cm_singleton_ptr to static variableVedant Paranjape
The global pointer pointing to libcamera's CameraManager isn't used outside of the gstlibcamera-utils.cpp compilation unit. Make it static. Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-22gstreamer: Support planar formatsKieran Bingham
Existing pipeline handlers already support planar YUV formats. Extend the gstreamer format map to incorporate them. While here, split the formats into distinct groups. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
2021-09-22qcam: viewfinder_gl: Support configurable stride in shadersLaurent Pinchart
The RGB and YUV conversion doesn't take the stride into account, neither when creating the textures, nor when sampling them. Fix it by using the stride as the texture width, and multiplying the x coordinate in the vertex shaders by a factor to only sample the active portion of the image. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-22qcam: format_converter: Add fully-planar YUV formats supportLaurent Pinchart
Add support for the YUV420, YVU420 and YUV422 formats supported by libcamera. YUV420 can be produced by the Raspberry Pi pipeline handler, being able to display it is useful for testing. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-22qcam: format_converter: Rename YUV and NV to YUVPacked and YUVSemiPlanarLaurent Pinchart
To prepare for fully-planar YUV support, rename the existing format families YUV and NV to YUVPacked and YUVSemiPlanar respectively. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-22qcam: format_converter: Add configurable stride supportLaurent Pinchart
Make the stride configurable to support conversion of images with padding at the end of lines. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-22qcam: viewfinder: Pass stride value to viewfinderLaurent Pinchart
qcam currently assumes that no padding is used at end of lines, and uses the image width as the stride. This leads to rendering failures with some formats on some platforms. To prepare for stride support, add a stride parameter to the ViewFinder::setFormat() function to pass the stride from the stream configuration to the viewfinder. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-09-22android: camera_device: Configure one stream for identical stream requestsHirokazu Honda
An Android HAL client may request multiple identical streams. It is redundant that a native camera device produces a separate stream for each of the identical requests. Configure the camera with a single stream in that case. The other identical HAL streams will be produced by the YUV post-processor. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-22android: camera_stream: Support PostProcessorYuv in CameraStreamHirokazu Honda
CameraStream creates PostProcessorYuv if the destination format is NV12. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-22android: camera_stream: Create post processor in configure()Hirokazu Honda
CameraStream creates PostProcessor and FrameBufferAllocator in the constructor. CameraStream assumes that a used post processor is JPEG post processor. Since we need to support various post processors, we would rather move the creation to configure() so as to return an error code if no proper post processor is found. This also moves FrameBufferAllocator and Mutex creation for consistency. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-21android: jpeg: Rectify variable naming style.Umang Jain
Rectify variable renaming style for YPlaneSize, UVPlaneSize. libcamera uses camelCase where first letter should be in lower case. Fixes: e355ca0087cd9("android: jpeg: Split and pass the thumbnail planes to encoder") Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-09-21android: yuv: Remove CameraDevice forward-declareUmang Jain
YUV post-processor doesn't need any instance reference from CameraDevice class. Remove it. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-09-19libcamera: base: Add libatomic dependencyFabrice Fontaine
Add libatomic dependency which is needed since the addition of the base support library in commit 27aff949fbc1 ("libcamera/base: Move extended base functionality") to avoid the following build failure: /tmp/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/9.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: src/libcamera/base/libcamera-base.so.p/message.cpp.o: in function `libcamera::Message::registerMessageType()': message.cpp:(.text+0x290): undefined reference to `__atomic_fetch_add_4' Fixes: 27aff949fbc1 ("libcamera/base: Move extended base functionality") Fixes: http://autobuild.buildroot.org/results/6e3471df8e9312a1789ca05ae70cc2283bfeec23 Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-14libcamera: v4l2_videodevice: Handle unexpected buffersKieran Bingham
A kernel bug can lead to unexpected buffers being dequeued where we haven't entered the buffer in our queuedBuffers_ list. This causes invalid accesses if not handled correctly within libcamera, and while it is a kernel issue, we can protect against unpatched kernels to provide a more suitable error message. This is fixed in the kernel by commit c592b46907ad ("media: videobuf2-core: dequeue if start_streaming fails") [0] [0] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c592b46907ad Handle unexpected buffers by returning a nullptr, and move cache management after the validation of the buffer. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-14ipa: ipu3: Clear incoming parameter use flagsKieran Bingham
The incoming params buffer may contain uninitialised data, or the parameters of previously queued frames. Clearing the entire buffer may be an expensive operation, and the kernel will only read from structures which have their associated use-flag set. It is the responsibility of the algorithms to set the use flags accordingly for any data structure they update during prepare(). Clear the use flags of the parameter buffer before passing the buffer to the algorithms during their prepare() operations. Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-10v4l2: v4l2_camera_proxy: Set the compressed flag in enum_fmtPaul Elder
Set the compressed flag in ENUM_FMT if the format is MJPEG. As the only compressed format that libcamera currently supports is MJPEG, this should be sufficient. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
2021-09-10v4l2: v4l2_camera_proxy: Report the proper format name in enum_fmtPaul Elder
Now that libcamera has the V4L2 format names, retrieve and report those names in ENUM_FMT. While at it, refactor the code slightly with PixelFormatInfo. This fixes the test failures on v4l2-compliance with the v4l2 compatilibity layer that were observed in version v4l2-compliance version 1.21.0-4838. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
2021-09-10libcamera: v4l2_pixelformat: Add helper function to get the descriptionPaul Elder
Add a helper function to V4L2PixelFormat for retrieving the V4L2 description string. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
2021-09-10libcamera: v4l2_pixelformat: Add entries for NV24 and NV42Paul Elder
The entries for NV24 and NV42 were missing from the V4L2PixelFormat map. Add them. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
2021-09-10libcamera: v4l2_pixelformat: Add V4L2 description stringsPaul Elder
Add V4L2 description strings to the map of V4L2 formats. To achieve this, create an Info struct to wrap them. Update the one current user of the old map. This will be used later in the V4L2 compatibility layer to report the V4L2 format description. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
2021-09-10v4l2: v4l2_compat_manager: Don't print "camera not found" on openat()Paul Elder
Some applications (like Firefox) run open() many times on video device nodes. This may lead to user confusion when they see "INFO V4L2Compat v4l2_compat_manager.cpp:146 No camera found for /dev/videoX" over and over again. Lower the log level to debug so that we can still get this information on debug, and so users won't see it all the time. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-09-09android: jpeg: Split and pass the thumbnail planes to encoderUmang Jain
After multi-planar support was introduced for jpeg encoding as well, EncoderLibJpeg::encode() expects a vector of planes as the source of framebuffer to be encoded. Currently, we are passing a contiguous buffer which is treated as only one plane (instead of two, as thumbnail is NV12). Hence, split the thumbnail data into respective planes according to NV12. This fixes a crash in encoding of thumbnails. Fixes: 894ca69f6043("android: jpeg: Support multi-planar buffers") Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-09-09libcamera: controls: Use a const ControlValidatorKieran Bingham
The ControlValidator passed to a ControlList constructor is used, but not modified. Make it const. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-09android: mm: cros_camera_buffer: Log failure error on cleanupUmang Jain
Failure can still happen by CameraBufferManager during Unlock() and/or Deregister() of camera3Buffer handles. We should be logging those errors as well. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-07v4l2: Sum bytesused for all planes when dequeuing bufferLaurent Pinchart
The V4L2 compatibility layer supports the single-planar API only, and thus exposes a single V4L2 buffer plane to applications, regardless of the number of planes in the FrameBuffer. For multi-planar frame buffers, the bytesused value isn't correct as it only takes the first plane into account. Fix it by summing the bytesused values for all FrameBuffer planes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
2021-09-07qcam: viewfinder_qt: Support multi-planar buffersLaurent Pinchart
Now that the ViewFinderQt receives an Image, move the Converter API to take an Image as well, and enable multi-planar buffer support. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-07qcam: viewfinder_gl: Support multi-planar buffersLaurent Pinchart
Now that the ViewFinderGL receives an Image, it can trivially support multi-planar buffers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-07qcam: Use Image class to access pixel dataLaurent Pinchart
Replace the manual implementation of frame buffer mapping with the Image class to improve code sharing. The ViewFinder API is updated to take an Image pointer in the render() function to prepare for multi-planar buffer support. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-07qcam: Print bytesused for all planesLaurent Pinchart
Fix the debug message that prints frame metadata to print the number of bytes used for each plane, not just the first one. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-07cam: drm: Avoid importing the same dmabuf multiple timesLaurent Pinchart
When creating a DRM frame buffer, the dmabufs for the planes are imported as GEM objects. For multi-planar formats, all planes may use the same dmabuf, which results in multiple imports. This doesn't cause any issue at import time, as DRM detects this situation and returns the same GEM object. However, when destroying the frame buffer, the same GEM object ends up being closed multiple times, which generates an error. Fix this by avoiding multiple imports of the same dmabuf for the same frame buffer. While the issue may theoretically occur with identical dmabufs for different frame buffers, this is quite unlikely and is thus not addressed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-07cam: drm: Set per-plane offsets when creating DRM frame bufferLaurent Pinchart
Now that libcamera supports per-plane offsets, pass the values to drmModeAddFB2(). The KMS sink in cam is now capable of rendering multi-planar formats. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-07cam: drm: Support per-plane stride valuesLaurent Pinchart
The stride is not always identical for all planes for multi-planar formats. Semi-planar YUV formats without horizontal subsampling often have a chroma stride equal to twice the luma stride, and tri-planar YUV formats with a 1/2 horizontal subsampling often have a chroma stride equal to half the luma stride. This isn't correctly taken into account when creating a DRM frame buffer, as the same stride is set for all planes. libcamera doesn't report per-plane stride values yet, but uses chroma strides that match the above description for all currently supported platforms. Calculation the chrome strides appropriately in the KMSSink class, and pass them to DRM::createFrameBuffer(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-07cam: file_sink: Use Image class to access pixel dataLaurent Pinchart
Replace the manual implementation of frame buffer mapping with the Image class to improve code sharing. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-09-07cam: Add Image classLaurent Pinchart
The new Image class represents a multi-planar image with direct access to pixel data. It currently duplicates the function of the MappedFrameBuffer class which is internal to libcamera, and will serve as a design playground to improve the API until it is considered ready to be made part of the libcamera public API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>