| Age | Commit message (Collapse) | Author |
|---|
|
The Extensible constructor takes a pointer to a Private instance, whose
lifetime it then manages. Make this explicit in the API by passing the
pointer as a std::unique_ptr<Private>.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When the stream is stopped, the V4L2VideoDevice sends back all
the queued buffers with FrameMetadata::FrameCancelled status.
It is the responsibility of the pipeline handler to handle
these buffers with FrameMetadata::FrameCancelled. VIMC is
currently missing this handling path.
As the FrameMetadata::FrameCancelled is set when the stream is
stopped, we can be sure that no more queued and re-use of request
shall happen. Hence, cancel all the requests' buffers force a
complete with completeBuffer().
The issue is caught by the gstreamer_single_stream_test.cpp running
with vimc. During the check with meson built-in option
'-Db_sanitize=address,undefined'
it was observed:
==118003==ERROR: AddressSanitizer: heap-use-after-free on address 0x60e000037108 at pc 0x7f225160c9ac bp 0x7f224a47b620 sp 0x7f224a47b618
READ of size 4 at 0x60e000037108 thread T1
#0 0x7f225160c9ab in libcamera::Request::sequence() const ../include/libcamera/request.h:55
#1 0x7f22518297aa in libcamera::VimcCameraData::bufferReady(libcamera::FrameBuffer*) ../src/libcamera/pipeline/vimc/vimc.cpp:577
#2 0x7f225183b1ef in libcamera::BoundMethodMember<libcamera::VimcCameraData, void, libcamera::FrameBuffer*>::activate(libcamera::FrameBuffer*, bool) ../include/libcamera/base/bound_method.h:194
#3 0x7f22515cc91f in libcamera::Signal<libcamera::FrameBuffer*>::emit(libcamera::FrameBuffer*) ../include/libcamera/base/signal.h:126
#4 0x7f22515c3305 in libcamera::V4L2VideoDevice::streamOff() ../src/libcamera/v4l2_videodevice.cpp:1605
#5 0x7f225181f345 in libcamera::PipelineHandlerVimc::stop(libcamera::Camera*) ../src/libcamera/pipeline/vimc/vimc.cpp:365
The VimcCameraData::bufferReady seems to emit even after the stream
is stopped. It's primarily due to vimc's lack of handling
FrameMetadata::FrameCancelled in its pipeline handler.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Plumb through VIMC mojo interface to enable buffers passing.
VIMC does not have parameters or statistics buffers but we can
mimick the typical case of passing IPA buffers from pipeline
handler to IPA using mock buffers. The mock IPA buffers are
FrameBuffers which are dmabuf backed (in other words, mmap()able
through MappedFramebuffer inside the IPA).
This commits shows:
- Passing the parameter buffer from the pipeline handler to
the IPA through functions defined in mojom interface.
- Passing request controls ControlList to the IPA.
Any tests using VIMC will now loop in the IPA paths. Any tests running
in isolated mode will help us to test IPA IPC code paths especially
around (de)serialization of data passing from pipeline handlers to the
IPA. Future IPA interface tests can simply extend the vimc mojom
interface to achieve/test a specific use case as required.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
VIMC pipeline handler has dmabuf-backed mock FrameBuffers which are
specifically targetted mimicking IPA buffers (parameter and statistics).
Map these mock buffers to the VIMC IPA that would enable exercising IPA
IPC code paths. This will provide leverage to our test suite to test
IPA IPC code paths, which are common to various platforms.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
VIMC is a virtual test driver that doesn't have statistics or
parameters buffers that are typically passed from a pipeline
handler to its platform IPA. To increase the test coverage going
forward, we can at least mimick the typical interaction of how
a pipeline handler and IPA interact, and use it to increase the
test coverage.
Hence, create simple (single plane) dmabuf-backed FrameBuffers,
which can act as mock IPA buffers and can be memory mapped (mmap)
to VIMC IPA. To create these buffers, temporarily hijack the output
video node and configure it with a V4L2DeviceFormat. Buffers then
can be exported from the output video node using
V4L2VideoDevice::exportBuffers(). These buffers will be mimicked as
IPA buffers in subsequent commits.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
As part of an effort to make the vimc IPA usable for testing, extend it
with a configure function. The configuration is currently ignored by the
IPA.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
"NOIR" modules are ones that have had the IR filters removed but are
otherwise identical. The same tuning can be used as for the regular
version except that the colour calibration supplied to the AWB
algorithm no longer works. Instead we need to switch the algorithm to
its basic "grey world" method.
Users with "NOIR" modules can switch to the matching "xxx_noir.json"
tuning file by using the LIBCAMERA_RPI_TUNING_FILE environment
variable.
Signed-off-by: David Plowman <david.plowman@raspberypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Tidy-up a bit the inclusions directive in the IPU3 IPA module.
In detail:
- ipu3.cpp is missing inclusions for:
std::abs from <cmath>
std::map from <map>
std::min/max from <algorithm>
std::numeric_limits from <limits>
std::unique_ptr from <memory>
std::vector from <vector>
and does not require <sys/mman.h>
- ipu3_agc has two not used inclusions in the header file and one the cpp file
and is missing <chrono> for std::literals::chrono_literals
- ipu3_awb is missing <algorithm> for std::sort and does not use
<numeric> or <unordered_map>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
All the IPU3 Camera controls are currently initialized by the pipeline
handler which initializes them using the camera sensor configuration and
platform specific requirements.
However, some controls are better initialized by the IPA, which might,
in example, cap the exposure times and frame duration to the constraints
of its algorithms implementation.
Also, moving forward, the IPA should register controls to report its
capabilities, in example the ability to enable/disable 3A algorithms on
request.
Move the existing controls initialization to the IPA, by providing
the sensor configuration and its controls to the IPU3IPA::init()
function, which initializes controls and returns them to the pipeline
through an output parameter.
The existing controls initialization has been copied verbatim from the
pipeline handler to the IPA, if not a for few line breaks adjustments
and the resulting Camera controls values are not changed.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Introduce a new field in the controls serialization protocol to
allow discerning which ControlIdMap a ControlInfoMap refers to.
The newly introduced IdMapType enumeration describes the possible
info maps:
- Either the globally available controls::controls and
properties::properties maps, which are valid across IPC boundaries
- A ControlIdMap created locally by the V4L2 device, which is not valid
across the IPC boundaries
At de-serialization time the idMapType field is inspected and
- If the idmap is a globally defined one, there's no need to create
new ControlId instances when populating the de-serialized
ControlInfoMap. Use the globally available map to retrieve the
ControlId reference and use it.
- If the idmap is a map only available locally, create a new ControlId
as it used to happen before this patch.
As a direct consequence, this change allows us to perform lookup by
ControlId reference on de-serialized ControlIdMap that refers to the
libcamera defined controls::controls and properties::properties.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
ControlInfoMap does not have a ControlId map associated, but rather
creates one with the generateIdMap() function at creation time.
As a consequence, when in the need to de-serialize a ControlInfoMap all
the ControlId it contains are created by the deserializer instance, not
being able to discern if the controls the ControlIdMap refers to are the
global libcamera controls (and properties) or instances local to the
V4L2 device that has first initialized the controls.
As a consequence the ControlId stored in a de-serialized map will always
be newly created entities, preventing lookup by ControlId reference on a
de-serialized ControlInfoMap.
In order to make it possible to use globally available ControlId
instances whenever possible, create ControlInfoMap with a reference to
an externally allocated ControlIdMap instead of generating one
internally.
As a consequence the class constructors take and additional argument,
which might be not pleasant to type in, but enforces the concepts that
ControlInfoMap should be created with controls part of the same id map.
As the ControlIdMap the ControlInfoMap refers to needs to be allocated
externally:
- Use the globally available controls::controls (or
properties::properties) id map when referring to libcamera controls
- The V4L2 device that creates ControlInfoMap by parsing the device's
controls has to allocate a ControlIdMap
- The ControlSerializer that de-serializes a ControlInfoMap has to
create and store the ControlIdMap the de-serialized info map refers to
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In mmap() error handling path, errno is stored but never printed
in the error log. Print it.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove the need for callers to reference PROT_READ/PROT_WRITE directly
from <sys/mman.h> by instead exposing the Read/Write mapping options as
flags from the MappedFrameBuffer class itself.
While here, introduce the <stdint.h> header which is required for the
uint8_t as part of the Plane.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The MappedFrameBuffer is a convenience feature which sits on top of the
FrameBuffer and facilitates mapping it to CPU accessible memory with
mmap.
This implementation is internal and currently sits in the same internal
files as the internal FrameBuffer, thus exposing those internals to
users of the MappedFramebuffer implementation.
Move the MappedFrameBuffer and MappedBuffer implementation to its own
implementation files, and fix the sources throughout to use that
accordingly.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove leftover inclusions of the sys/mman header file.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Usage of 'method' to refer to member functions comes from Java. The C++
standard uses the term 'function' only. Replace 'method' with 'function'
or 'member function' through the whole code base and documentation.
While at it, fix two typos (s/backeng/backend/).
The BoundMethod and Object::invokeMethod() are left as-is here, and will
be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To capture raw frames, the ImgU isn't needed. However, to implement
auto-exposure, we do need to configure the IPA since it shall setup
the sensor controls (exposure, vblank and so on) for the capture.
One cannot simply configure the IPA, without the ImgU as the
parameters and statistics buffer passed to the IPA are actually
managed by the ImgU.
Until we prepare and setup the ImgU to run an internal queue for
raw-only camera configuration, disallow this configuration and
report it as invalid.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
cameraBuffer function in private constructor is unused.
Mark it as such.
Fixes: 33dd4fab9d39("libcamera: base: class: Don't pass Extensible pointer to Private constructor")
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Propagate the requested test pattern mode to libcamera::Camera
through libcamera::Request and also set the android metadata to
the test pattern mode contained by the complete Request.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the sensor is switched to a mode with a different sensitivity,
the target exposure values need to be adjusted proportionately to
maintain the same image brightness.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We use the CamHelper class to initialise it to the usual value of 1.
The CamHelper's GetModeSensitivity method can be redefined to
implement a different behaviour for sensors that require it.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Use the KMSSink class to display the viewfinder stream, if any, through
DRM/KMS. The output connector is selected through the new -D/--display
argument.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Not all display controllers support enabling the display without any
active plane. Delay display enabling to the first frame.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a KMSSink class to display framebuffers through the DRM/KMS API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To prepare for viewfinder operation through the DRM/KMS API, add a set
of helper classes that encapsulate the libdrm functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Rename the BufferWriter class to FileSink to establish a common naming
scheme for all sinks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Make the BufferWriter class inherit from FrameSink, and use the
FrameSink API to manage it. This makes the code more generic, and will
allow usage of other sinks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The FrameSink class serves as a base to implement components that
consume frames. This allows handling frame sinks in a generic way,
independent of their nature. The BufferWrite class will be ported to
FrameSink in a second step.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Extend the EventLoop class to support watching file descriptors for
read and write events.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Change format specifier %s to %u in name template field of request pad
template.
Pad names are as follows, src_0, src_1, etc. So, instead of using string
format specifier, use unsigned integer format specifier.
Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Nautilus has two in-built cameras, one UVC and one attached to IPU3.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Currently, all UVC cameras are reported with CameraLocationExternal [1]
by libcamera-core since there is no universal information or standard,
to know the location of these cameras. However, in the libcamera HAL
layer, we can make an informed decision whether it's external or
internal, simply by checking its presence in the HAL configuration
file.
The CameraHalManager will now assign the numerical id of the camera
accordingly when initializing the CameraDevice, based on the camera
facing value set in the HAL config file.
[1] 76809320bb1a ("libcamera: pipeline: uvcvideo: Treat all UVC cameras
as external")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Error out on any camera's location if set to "external", in the HAL
configuration file. The HAL configuration file is meant to override the
location property, and overriding an internal camera location to
external doesn't make sense.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Currently CameraDevice wrapper is created first and then HAL config
validity is checked. If the validity checks fail, the code path will
simply return, in which case, creating CameraDevice seems a futile
exercise.
This patch defers the creation of CameraDevice wrapper until the HAL
config validity is checked for internal cameras. This will also enable
us to infer a few things beforehand, by reading the config file before
creating the CameraDevice wrapper.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The GL_RG and GL_RED texture formats are not supported in OpenGL ES
prior to 3.0. In order to be compatible with OpenGL ES 2.0, use
GL_LUMINANCE_ALPHA and GL_LUMINANCE instead. The shader code needs to be
updated accordingly for GL_RG, as the second component is now stored in
the alpha component instead of the green component. Usage of the red
component is fine, the luminance value is stored in the red, green and
blue components.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
|
|
The Camera::Private class is defined in camera.cpp. To prepare for
allowing it to be subclassed by pipeline handlers, move it to a new
internal/camera.h header.
The \file comment block in camera.cpp now needs to explicitly tell which
camera.h file it refers to.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The FrameBuffer::Private class is exposed to pipeline handlers, and is
thus part of the internal libcamera API. As such, it should be
documented.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Extensible and Extensible::Private classes contain pointers to each
other. These pointers are initialized in the respective class's
constructor, by passing a pointer to the other class to each
constructor. This particular construct reduces the flexibility of the
Extensible pattern, as the Private class instance has to be allocated
and constructed in the members initializer list of the Extensible
class's constructor. It is thus impossible to perform any operation on
the Private class between its construction and the construction of the
Extensible class, or to subclass the Private class without subclassing
the Extensible class.
To make the design pattern more flexible, don't pass the pointer to the
Extensible class to the Private class's constructor, but initialize the
pointer manually in the Extensible class's constructor. This requires a
const_cast as the o_ member of the Private class is const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The LIBCAMERA_O_PTR macro is part of the Extensible class
infrastructure, but doesn't link to it. This makes the generated
documentation unclear. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Extensible::_d() functions are meant to be called by users of the
class. Document them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add type safety by turning the MapFlag and OpenModeFlag enum into enum
class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the newly introduced Flags<> class to store a bitfield of
File::OpenMode in a type-safe way. The existing File::OpenMode enum is
renamed to File::OpenModeFlag to free the File::OpenMode for the Flags<>
type alias.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the newly introduced Flags<> class to store a bitfield of
File::MapFlag in a type-safe way.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a Flags template class that provide type-safe bitwise operators on
enum values. This allows using enum types for bit fields, without giving
away type-safety as usually done when storing combined flags in integer
variables.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a MaxLatency control, and plumb it into the HAL accordingly.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=50
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add skeletal still and manual request templates so that we can expand
them for FULL support.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We need to be able to add additional characteristics/request/result keys
into the corresponding list in the static metadata based on libcamera
camera capabilities. We also need to be able to easily check if the
lists have specific keys, for populating templates and result metadata.
Turn the characteristics, requests, and results keys vectors into sets,
and move them to member variables to achieve this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add helpers for setting android metadata from libcamera controls.
There are two versions, for scalars and collections, both of which take
a default value to fill in the android control if the libcamera control
is not found. They both return the value that was set.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add the infrastructure for checking and reporting capabilities. Use
these capabilities to determine the hardware level as well.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=55
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The data for the exif ISO tag needs to come from SENSOR_SENSITIVITY. Set
it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
