| Age | Commit message (Collapse) | Author |
|---|
|
Camera sensors can include an ISP, which may be reported as a separate
entity from the pixel array in the media graph.
Support such sensors by accepting MEDIA_ENT_F_PROC_VIDEO_ISP as a valid
entity type. This allows using sensors that can be fully (or at least
meaningfully) configured through the ISP's source pad only. Sensors that
require further configuration, on the ISP sink pad and/or on the pixel
array's source pad, will require further extension to the CameraSensor
class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
When a sensor can upscale the image, the native sensor resolution isn't
equal to the largest size reported by the sensor. Use the active area
size instead, and default it to the largest enumerated size if the crop
rectangle targets are not supported.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The rkisp1 driver has received support for newer ISP versions, which
changes its userspace API and ABI. Adapt to the API change. This
requires kernel v5.11 or newer, or backporting the corresponding rkisp1
changes to older kernels.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Implement and expose the symbol and functions that the new cros camera
API requires. Since we don't actually need them, leave them empty.
Update meson accordingly.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Introduce the CameraBuffer backend for the Chromium OS operating system
and the associated meson option.
The Chromium OS CameraBuffer implementation uses the
cros::CameraBufferManager class to perform mapping of 1 plane and multiplane
buffers and to retrieve size information.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Each memory backend has to declare a CameraBuffer class implementation
that bridges the API calls to each CameraBuffer::Private implementation.
As the code is likely the same for most (if not all) backends, provide
a convenience macro that expands to the CameraBuffer class declaration.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the newly introduced function to retrieve the size of
the JPEG encoding destination buffer, in order to calculate where
the JPEG_BLOB_ID should be placed.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
To maintain compatibility with platforms that do not provide a memory
backend implementation add a method to be return the size of the buffer
used for JPEG encoding capped to a maximum size.
Platforms that implement a memory backend will always calculate the
correct buffer size.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the newly introduced CameraBuffer class as the type for the
destination buffer in the PostProcessor class hierarchy in place of the
libcamera::MappedFrameBuffer one and use its API to retrieve the length
and the location of the CameraBuffer plane allocated for JPEG
post-processing.
Remove all the assumption on the underlying memory storage and only go
through the CameraBuffer API when dealing with memory buffers. To do so
rework the Encoder interface to use a raw pointer and an explicit size
to remove access to the Span<uint8_t> maps that serve as memory storage
for the current implementation but might not be ideal for other memory
backend.
Now that the whole PostProcessor hierarchy has been converted to use
the CameraBuffer API remove libcamera::MappedBuffer as base class
of the CameraBuffer interface and only reply on its interface.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
In order to prepare to support more memory backends, make the
CameraBuffer class implement the PIMPL (pointer-to-implementation)
pattern by inheriting from the libcamera::Extensible class.
Temporary maintain libcamera::MappedBuffer as the CameraBuffer base
class to maintain compatibility of the CameraStream::process() interface
that requires a MappedBuffer * as second argument and will be converted
to use a CameraBuffer in the next patch.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The destination buffer for the post-processing component is
currently first mapped in the CameraDevice class and then passed
to CameraStream which simply calls the post-processor interface.
Move the mapping to CameraStream::process() to tie the buffer
mapping to the lifetime of the CameraBuffer instance.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The buffers passed to the post processor are currently named 'buffer'
and 'mapped', names that do not convey their role.
Use 'src' and 'dest' instead.
Cosmetic change only.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The buffer_handle_t type is defined as 'const native_handle_t*'.
Drop the 'const' specifier from the parameter of the CameraBuffer
class constructor and in the Android generic memory backend.
Also rename 'camera3buffer' in 'camera3Buffer' to comply with the
coding style guidelines.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
In order to provide support for different memory backends,
move the MappedCamera3Buffer class definition outside of the
CameraDevice class to its own file and rename it in CameraBuffer.
The interface defined in camera_buffer.h will be implemented by
different backends that will be placed in the src/android/mm
subdirectory.
Provide a first implementation for the 'generic android' backend
which matches the existing one.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Allow support for multiple streams on a per-device basis. The decision
should be made based on the ability of the converter to run multiple
times within the duration of one frame. Hardcode it in
SimplePipelineInfo for now.
We may later compute the number of supported streams dynamically based
on the requested configuration, using converter bandwidth information
instead of a hardcoded fixed value.
All platforms are currently limited to a single stream until they get
successfully tested with multiple streams.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To extend the multi-stream support to runtime operation of the pipeline,
expand the converter queue to store multiple output buffers, and update
the request queuing and buffer completion handlers accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Extend the SimpleCameraConfiguration to support multiple streams, using
the multi-stream capability of the SimpleConverter class. Wiring up
multi-stream support in the other pipeline handler operations will come
in further commits.
To keep the code simple, require all streams to use the converter if any
stream needs it. It would be possible to generate one stream without
conversion (provided the format and size match what the capture device
can generate), and this is left as a future optimization.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The number of internal buffers, used between the capture device and the
converter, doesn't need to depend on the number of buffers allocated for
the output stream of the pipeline. Hardcode it to a fixed value.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Converter usage is a per-camera property, move its data to the
SimpleCameraData class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Store the list of converter output formats in the Configuration
structure, to be used to implement multi-stream support. As the
Configuration structure grows bigger, avoid duplicating it in the
formats_ map for each supported pixel format by storing it in a configs_
vector instead, and storing pointers only in the map.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
As the pipeline configuration is selected in
SimpleCameraConfiguration::validate() already, cache it in the
SimpleCameraConfiguration instead of looking it up in
SimplePipelineHandler::configure(). This makes little difference at the
moment, but will save duplication of more complex logic between
validate() and configure() when adding support for multiple streams.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Configuration::pixelFormat field stores the pixel format at the
output of the capture part of the pipeline. Rename it to captureFormat,
to match the related captureSize field.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The simple pipeline handler has grown over time, and isn't that simple
anymore that it can easily be understood by an unfamiliar reader.
Document the design to explicitly state the expectations of the pipeline
handler, and to explain how it operates.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The SimpleCameraConfiguration class has a sensorFormat_ member variable
and a corresponding accessor that are never used. Drop them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
To prepare for multiple streams support, store the streams in a vector
in the SimpleCameraData class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
While the M2M device backing the converter doesn't support multiple
streams natively, it can be run once per stream to produce multiple
outputs from the same input, with different output formats and sizes.
To support this, create a class to model a stream and move control of
the M2M device to the Stream class. The SimpleConverter class then
creates stream instances and iterates over them. Each stream needs its
own instance of the V4L2M2MDevice, to support different output
configurations. The SimpleConverter class retains a device instance to
support the query operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The SimpleConverter API signals completion of input and output buffer
pairs. This unnecessarily delays requeueing the input buffer to the
video capture queue until the output buffer completes, and also delays
signalling request completion until the input buffer completes. While
this shouldn't cause large delays in practice, it will also not scale
when multi-stream support will be added to the converter class.
To address the current issue and prepare for the future, decouple
signalling of input and output buffers completion.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Simplify the SimpleConverter interface by opening the M2M device in the
constructor. The explicit call to open() is replaced by a check through
a new isValid() function, and the unused close() function is removed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
buffers count
The number of buffers on the input and output of the converter don't
necessarily need to match. Use the buffer count from the input and
output configuration respectively. This removes the need to pass the
buffer count to the start() function, which brings it closer to the
pipeline handler API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Use the stride of the video capture device to configure the converter
input. This ensures that no stride mismatch occurs inadvertently along
the pipeline.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
configuration
Group the configuration parameters for the converter input in a
StreamConfiguration instance. This makes the configure() function
signature cleaner, and will allow passing additional parameters (such as
stride and buffer count).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The SimpleConverter class has different sets of functions, related to
static queries, device configuration and runtime operation. Group the
query functions together. While at it, swap the arguments to the
strideAndFrameSize() function to match the order in which pixel format
and size are usually specified.
No functional change is included.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The stride (and frame size) calculation has been moved from configure
time to configuration validate time by commit 89fb1efac240 ("libcamera: simple:
Fill stride and frameSize at config validation"). This change has
however left one stray setting of the stride when configuring the
converter. Fix it.
While at it, turn the SimpleConverter::configure() output configuration
argument to a const reference to emphasize it can't be null and isn't
modified by the function, and rename it from cfg to outputCfg to make
its purpose clearer.
Fixes: 89fb1efac240 ("libcamera: simple: Fill stride and frameSize at config validation")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Replace manual destruction of the converter with std::unique_ptr<>. This
removes the need for the SimplePipelineHandler destructor.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Phi-Bang Nguyen <pnguyen@baylibre.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Regions of the image where the statistics are not trusted should not
be put in the zones_ list.
This also means that the AWB may fail to run initially, so
async_results_ needs to be initialised to some kind of default.
Finally, the RGB zone structures can be zero-initialised safely now,
the previous value of -1 would seem unusual.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Some more code from pre-libcamera versions is removed. There is no
functional change.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The flag that is used to record if the sensor driver supports the H/V flip
controls is initialized at camera creation time, but it was not
initialized by the IPU3Camera constructor, resulting in erroneous
values that might break capture for sensor that do not support flipping.
Fix this by initializing the flag in the class constructor.
Fixes: 6c4ce7de30c8 ("libcamera: ipu3: Add rotation to ipu3 pipeline")
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Fabian Wüthrich <me@fabwu.ch>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Our android HAL implementation currently does not support external
cameras, so if the camera location property is external, set it to
front.
This allows the following CTS test to pass:
- android.hardware.camera2.cts.CameraManagerTest#testCameraManagerGetDeviceIdList
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Print a warning when the orientation of a sensor is unknown. The
location property is still defaulted to external.
Also add a recommended controls list, similar to the optional and
mandatory controls list, to handle controls in a similar situation in
the future.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The addition of the new IPA IPC mechanism compiles pipeline-specific
headers to define the interface between the pipeline and the IPA.
This was optimised in 08ce394465b5 ("meson: ipa, proxy: Only build
proxies for enabled pipelines") to only build for enabled pipelines,
however the tests directly use the VIMC pipeline handler, and require
it to be built.
Create a local variable to store the requested pipelines from the user
configuration and extend the enabled pipelines to ensure that VIMC is
always enabled if the tests are also enabled
Fixes: 08ce394465b5 ("meson: ipa, proxy: Only build proxies for enabled pipelines")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Sebastian Fricke<sebastian.fricke@posteo.net>
|
|
Use the same transformation logic as in the raspberry pipeline to
implement rotations in the ipu3 pipeline.
Tested on a Surface Book 2 with an experimental driver for OV5693.
Signed-off-by: Fabian Wüthrich <me@fabwu.ch>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Fabian Wüthrich <me@fabwu.ch>
|
|
Usage of std::move() on a const lvalue will produce a const rvalue,
which the compiler will bind to the const lvalue reference of the
constructor or assignement operator. This results in the object being
copied, not moved. Drop std::move() in that case as it's misleading.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
When a Request is completed upon receiving the IPA produced metadata,
the metadata associated with the Request were over-written, deleting
the information set, in example, at ImgU output buffer completion.
If any additional Request metadata should be registered by inspecting
the IPA produced metadata it has to be done without deleting the already
registered entry.
Fix this by replacing the metadata over-write with a todo entry.
This change fixes CTS which was broken due to missing metadata in
the completed requests.
Fixes: 9708f49fecf2 ("libcamera: ipu3: Share parameter and statistic buffers with IPA")
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The ControlList passed to the Camera::start() function isn't modified.
Make it const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
In order to get the stats back, the imgu subdev needs to have the
V4L2_CID_INTEL_IPU3_MODE control set.
Set it to video mode by default to get the stats at each frame.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Kieran: Updated message to match Laurent's suggestion]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Setting a default EXPOSURE and ANALOGUE_GAIN makes sense for the first
frame but there is no need to force it for all frames.
It will be called later by the 3A algorithms.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The call to setFormat uses uninitialised data, which, could cause
unwanted effects. It is also trapped and reported by valgrind.
Initialise the V4L2SubdeviceFormat structure correctly before use.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Only update the lens shading control if it is present in the
ControlList.
Add the dmabuf file descriptor to the lens shading control in-place
rather than taking a copy.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Rename the IPA interface namespace to ipa::RPi for consistency with
the libcamera::RPi namespace label.
There is no functional change in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This commit addresses a couple of tidy-ups after the IPAInterface
rework:
- Rename ConfigStaggeredWrite -> ConfigSensorParams
- Rename setIsp -> setIspControls
There is no functional change in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
