| Age | Commit message (Collapse) | Author |
|---|
|
Previously we required that the sensor absolutely reaches the target
exposure, but this can fail if frame rates or analogue gains are
limited. Instead insist only that we get several frames with the same
exposure time, analogue gain and that the algorithm's target exposure
hasn't changed either.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
partly saturated images
When parts of an image saturate then the image brightness no longer
increases linearly with increased exposure/gain. Having calculated a
linear gain value it's better then to try it, allowing for saturating
regions, and if necessary increase the gain some more. We repeat this
several times.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
constructor
Use memset in the constructor for embedded structures, it is tidier
and initialises everything. We use the initialiser list for other
members.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
SwitchMode
When an application has specified fixed exposure time and/or gain they
must be programmed into the sensor immediately, even before the sensor
has been started. For this to happen they must be written into the
image metadata when the SwitchMode method is invoked.
We also make the default exposure/gain, when nothing has been set,
customisable in the tuning file.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Awb class now implements a SwitchMode method which outputs its
AwbStatus for other algorithms to read, should they be interested.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Introduce a function to fetch the AwbStatus (fetchAwbStatus), and call
it unconditionally at the top of Prepare so that both Prepare and
Process know thereafter that it's been done.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Previously the calculation computed Y for each region before returning
the weighted average, which "baked in" the over-importance of small
statistics regions. The revised calculation will treat all pixels
equally when the region weights are the same, making it easier to
use. With the previous scheme, proper "average" metering was difficult
to implement.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The method formerly known as divvyupExposure is given a more
understandable name.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
On the libcamera/VC4 platform the AGC Prepare/Process methods, and any
changes to the AGC settings, run synchronously - so a number of
mutexes and copies are unnecessary and can be removed.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Replace Raspberry Pi debug with libcamera debug.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Crop rectangle was not being configured on the isp output pad nor in the
resizer input pad, causing an unecessary crop in the image and an
unecessary scaling by the resizer when streaming with a higher
resolution then the default 800x600.
Example:
cam -c 1 -C -s width=3280,height=2464
In the pipeline:
sensor->isp->resizer->dma_engine
isp output crop is set to 800x600, which limits the output format to
800x600, which is propagated to the resizer input format set to 800x600,
and the resizer output format is set to the desired end resolution
3280x2464.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The names have to match for the setting to work. Use the libcamera
terminology for consistency (even though it touches more files).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Support the 'cloudy' AWB mode which was left out when the AwbModeTable
was introduced.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There is a condition that would cause the buffers to never be in sync
when we using only a single buffer in the bayer and embedded data streams.
This occurred because even though both streams would get flushed to resync,
one stream's only buffer was already queued in the device, and would end
up never matching.
Rework the buffer matching logic by combining updateQueue() and
tryFlushQueue() into a single function findMatchingBuffers(). This would
allow us to flush the queues at the same time as we match buffers, avoiding
the the above condition.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The JPEG post-processor is marked as licensed under GPL-2.0-or-later.
This is an oversight and unvoluntary. License it under the
LGPL-2.1-or-later as the rest of the camera HAL implementation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Umang Jain <email@uajain.com>
Acked-by: Hirokazu Honda <hiroh@chromium.org>
|
|
Instead of directly mmaping/unmapping buffers passed to the IPA, use
a MappedFrameBuffer. The latter is a cleaner interface, and avoid
code duplication.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Use a MappedFrameBuffer to mmap embedded data buffers for the pipeline
handler to use in the cases where the sensor does not fill it in. This
avoids the need to mmap and unmap on every frame.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When configuring the converter, the format is first set on the output
side based on the format of the camera pipeline output, and then the
format is set on the capture side to match the desired stream
configuration. The format parameter passed to
V4L2VideoDevice::setFormat() uses the same variable for both calls,
which has the unwanted side effect of carrying plane configuration from
the output side to the capture side of the converter. In particular, the
stride or plane size requested on the capture side can become
unnecessarily large when converting to a format with a lower number of
bits per pixel (for instance converting YUYV to NV12).
Fix this by resetting the format variable before using it to configure
the capture side.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The request completion handler is invoked in the camera manager thread,
which shouldn't be blocked for large amounts of time. As writing the
frames to disk can be a time-consuming process, move request processing
to the main thread by queueing an event to the event loop.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a deferred cals queue to the EventLoop class to support queuing
calls from a different thread and processing them in the event loop's
thread.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
There's no user of the EventDispatcher (and the related EventNotifier
and Timer classes) outside of libcamera. Move those classes to the
internal API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
To prepare for removal of the EventDispatcher from the libcamera public
API, switch to libevent to handle the event loop.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
To enable reusing Request objects, we kept a pool of free Requests. This
pool was not cleared upon stopping capture, however, which caused a
segfault when switching to another camera. Fix this by clearing the
Request pool on stopCapture().
Fixes: c753223ad6b9 ("libcamera, android, cam, gstreamer, qcam, v4l2: Reuse Request")
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
|
|
The V4L2_EVENT_FRAME_SYNC event may occur on both V4L2 video-devices
(V4L2VideoDevice) and sub-devices (V4L2Subdevice). Move the start of
frame detection to the common base class of the two, V4L2Device.
There is no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the d-pointer infrastructure offered by the Extensible class to
replace the custom implementation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Use the d-pointer infrastructure offered by the Extensible class to
replace the custom implementation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The d-pointer design patterns helps creating public classes that can be
extended without breaking their ABI. To facilitate usage of the pattern
in libcamera, create a base Extensible class with associated macros.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When closing the libcamerasrc, the reference to camera is released and
the camera manager is stopped. However, the camera configuration still
exists at that point, and holds a reference to the camera. This leads to
a warning from the device enumerator complaining that the media devices
are still in use:
[1:53:48.792327560] [408] ERROR DeviceEnumerator device_enumerator.cpp:165 Removing media device /dev/media1 while still in use
[1:53:48.792354022] [408] ERROR DeviceEnumerator device_enumerator.cpp:165 Removing media device /dev/media0 while still in use
A crash follows when the libcamerasrc is finalized, as deleting the
camera configuration will then release the last reference to the camera,
which attempts to delete the camera object with deleteLater() without an
event dispatcher.
Fix it by deleting the camera configuration before stopping the camera
manager.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
|
|
The V4L2DeviceFormat class now has default initializers for all members,
explicit initialization isn't needed anymore.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
When setting (or trying) a format with a multiplanar device, the
V4L2VideoDevice::trySetFormatMeta() function iterates over all planes
available in the V4L2DeviceFormat structure. The caller is responsible
for setting the plane count, and failure to do so properly may result in
memory corruption. This can lead to a crash way after the function
returns, making the problem difficult to debug.
As the issue is caused by a bug in the caller, use an assertion to catch
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The V4L2DeviceFormat class doesn't have a default constructor, neither
does it specifies default member initializers for the plane-related
members. This results in the planes array and planesCount members being
uninitialized by default, leading to undefined behaviour if the user of
the class doesn't initialize it explicitly.
Most users initialize V4L2DeviceFormat instances, but some don't. We
could fix them, but that would likely turn into a game of whack-a-mole.
As there's no use case for instantiating a large number of
V4L2DeviceFormat instances in a performance-critical code path, let's
instead add default initializers to avoid future issues.
While at it, define a type of the structures containing plane
information, and use an std::array.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add support for 24-bit and 32-bit RGB formats. The fragment samples the
texture and reorders the components, using a pattern set through the
RGB_PATTERN macro. The pattern stores the shader vec4 element indices
(named {r, g, b, a} by convention, for elements 0 to 3) to be extracted
from the texture samples, when interpreted by OpenGL as RGBA.
Note that, as textures are created with GL_UNSIGNED_BYTE, the RGBA
order corresponds to bytes in memory, while the libcamera formats are
named based on the components order in a 32-bit word stored in memory in
little endian format.
An alternative to manual reordering in the shader would be to set the
texture swizzling mask. This is however not available in OpenGL ES
before version 3.0, which we don't mandate at the moment.
Only the BGR888 and RGB888 formats have been tested, with the vimc
pipeline handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
In preparation for RGB formats support, store the three Y, U and V
textures in an array. This makes the code more generic, and will avoid
referring to an RGB texture as textureY_.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
In preparation for RGB formats support, rename the pointer to image data
from yuvData_ to data_.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
In preparation for RGB formats support, rename the identity vertex
shader from YUV.vert to identity.vert.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
There's no need to cast the yuvData_ unsigned char pointer to a char
pointer before performing pointer arithmetics. Drop the unneeded casts.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
When ViewFinderGL::setFormat() is called, the fragment shader is deleted
and recreated for the new format. This results in unnecessary shader
recompilation if only the size is changed and the pixel format remains
the same. Keep the existing shader in that case.
The null test for fragmentShader_ can be removed, as if the shader
program is linked, the fragment shader is guaranteed to exist.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
When setting a new format, the existing fragment shader is deleted and a
new shader should be created. However, the shader pointer isn't set to
nullptr after deleting it, resulting in the deleter shader being reused.
Fix it by managing shader pointers with std::unique_ptr<> to prevent
similar bugs from happening in the future.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add and use tracepoints in Request. Requests are core to libcamera
operation, thus detecting delays in their processing is important, and
serves as a good usage example of tracepoints.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Implement tracing infrastructure in libcamera. It takes .tp files, as
required by lttng, and generates a tracepoint header and C file, as lttng
requires. meson is updated accordingly to get it to compile with the
rest of libcamera. Update the documentation accordingly.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The class IPAManager has no method ipaCreate, but the method createIPA.
s/pipeline handlers call the IPAManager::ipaCreate()
/pipeline handlers call the IPAManager::createIPA()
Signed-off-by: Sebastian Fricke <sebastian.fricke.linux@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Embed a Jpeg-encoded thumbnail into Exif metadata using the Thumbnailer
class that got introduced.
Introduce a helper function in Exif class for setting the thumbnail
data.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Add todo comment, and Compression enum]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a basic image Thumbnailer class for the frames being captured.
Currently, the thumbnailer can scale NV12 frames. It shall be used
to generate a thumbnail image for EXIF metadata, in the subsequent
commit.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Allow encoding frames which are directly handed over to the encoder
via a span or vector i.e. a raw frame bytes. Introduce an overloaded
EncoderLibJpeg::encode() with libcamera::Span source parameter to
achieve this functionality. This makes the libjpeg-encoder a bit
flexible for use case such as compressing a thumbnail generated for
Exif.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
CameraDevice::toPixelFormat() doesn't change the state of the
CameraDevice. Marks it a const function so that it can be called
in const functions.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
std::map::at() searches std::map by the given key. The commit
e1f9fdb8a5bd ("android: camera_device: Remove shadowing FrameBuffer
usage") uses it with 0 to intend to accessing the first element of the
map, but actually access the element whose key is nullptr. This causes
the crash because the map doesn't have the element with nullptr. This
fixes the issue by replacing the std::map::at() operation by
std::map::begin().
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Updated commit message]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The last assignment of the ret variable in getControls() is not consumed
so it's unnecessary to set it. This likely originates from a similar
code flow in setControls() where the ret variable is later consumed.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The mutex_ stored in the CameraManager::Private class is used to protect
members that may need to be accessed from const functions. Make it
mutable to allow this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
If converter_->open() fails, the code deletes the converter_ but then
happily goes on, and at the very next lines will use converter_ to
connect the bufferReady signal.
Ensure the converter is only connected when successfully opened by
extending the conditional and connecting in an else scope instead.
Reported-by: Tomi Valkeinen <tomi.valkeinen@iki.fi>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The method calls setFormat(), stores the return value, but then does not
do anything with the return value. I presume it is meant to fail and
return the error.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
