| Age | Commit message (Collapse) | Author |
|---|
|
The RGB and YUV conversion doesn't take the stride into account, neither
when creating the textures, nor when sampling them. Fix it by using the
stride as the texture width, and multiplying the x coordinate in the
vertex shaders by a factor to only sample the active portion of the
image.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The GL_RG and GL_RED texture formats are not supported in OpenGL ES
prior to 3.0. In order to be compatible with OpenGL ES 2.0, use
GL_LUMINANCE_ALPHA and GL_LUMINANCE instead. The shader code needs to be
updated accordingly for GL_RG, as the second component is now stored in
the alpha component instead of the green component. Usage of the red
component is fine, the luminance value is stored in the red, green and
blue components.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
|
|
This integrates the vertex and the fragment shaders by Morgan McGuire
into qcam.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
bayer_8.* vertex and fragment shaders carry the copy of the 2-Clause
BSD License. Replace it with the SPDX-License-Identifier.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fetching into value[2] corresponds to E0, and fetching into value[3] - to
F0. The fetch()-es themselves are correct, but the comments were not.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This commit copies the shaders from:
https://github.com/motmot/libcamiface/commit/e36d51580510c211afc0430141085eb7a77d811b
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
All the four Bayer orders are supported.
The 4 LS bits of the 12-bit colour values are dropped as the RGBA
format we convert into has only 8 bits per colour.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The shader supports all 4 packed RAW10 variants.
Simple bi-linear Bayer interpolation of nearest pixels is implemented.
The 2 LS bits of the 10-bit colour values are dropped as the RGBA
format we convert into has only 8 bits per colour.
The texture coordinates passed to the fragment shader are adjusted
to point to the nearest pixel in the image. This prevents artifacts
when the image is scaled from the frame resolution to the window size.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In preparation to extend the supported formats, extend the tex_stepx
uniform to cover the steps between texels in both horizontal and
vertical directions.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add support for 24-bit and 32-bit RGB formats. The fragment samples the
texture and reorders the components, using a pattern set through the
RGB_PATTERN macro. The pattern stores the shader vec4 element indices
(named {r, g, b, a} by convention, for elements 0 to 3) to be extracted
from the texture samples, when interpreted by OpenGL as RGBA.
Note that, as textures are created with GL_UNSIGNED_BYTE, the RGBA
order corresponds to bytes in memory, while the libcamera formats are
named based on the components order in a 32-bit word stored in memory in
little endian format.
An alternative to manual reordering in the shader would be to set the
texture swizzling mask. This is however not available in OpenGL ES
before version 3.0, which we don't mandate at the moment.
Only the BGR888 and RGB888 formats have been tested, with the vimc
pipeline handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
In preparation for RGB formats support, rename the identity vertex
shader from YUV.vert to identity.vert.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The shader supports all 4 packed 8-bit YUV variants.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Use macros to select the U and V pattern, to avoid code duplication
between the two semi-planar shaders.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Rename shader files to prepare for packed YUYV support:
- The NV prefix isn't a good match for packed (or for 3-planar) formats,
replace it with a YUV prefix
- Use .frag and .vert extensions to differentiate between fragment and
vertex shaders
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
There's no need to prefix files in the local directory with './'. Drop
it.
While at it, add indentation to make the *.qrc files more readable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add OpenGL fragment and vertex shaders to convert two- and tri-planar
YUV formats to RGB. This will be used to accelerate YUV image rendering.
Signed-off-by: Show Liu <show.liu@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
